Search Results

Search found 32102 results on 1285 pages for 'local network'.

Page 68/1285 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• network manager says "device not managed"

  - by Daniella Glover

  I used to be able to share my network connection by editing the Auto Eth0 to share with other computers in the Ipv4 section and now I upgraded my laptop to 11.10 . Now are there no wired connections in the network manager. When I click my connections applet at the top of the tray it also says wired device not managed! when I type ifconfig -a daniella@daniella-1001HA:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 eth0:avahi Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc inet addr:169.254.13.40 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:45 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:25:d3:90:43:41 inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe90:4341/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12881 errors:0 dropped:0 overruns:0 frame:0 TX packets:12867 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8851081 (8.8 MB) TX bytes:2343199 (2.3 MB)

  Read the article

• Where can I find a list of local japanese game publishers

  - by Erik

  What would be a good starting point for locating small or medium size game publishers in Japan. We have a US/EU released game that we believe will fit the Japanese market well, and are looking for companies that we could contact for possible co-publishing. EDIT: So far, I've found http://www.gamebusiness.jp/directory/category.php?id=10002 and from one answer, http://www.gamedevmap.com/index.php?query=Japan&Submit=Search Starting a bounty, I need as many publishers as I can get.

  Read the article

• Access points fighting for dominance?

  - by Phillip Oldham

  We have a small office with a large number of wireless devices (a mixture of desktop machines, laptops, and wifi-enabled phones) all working from a single Apple Airport Extreme which extends our wired network. I've added another Airport Extreme for resiliency, since we've been seeing a decrease in performance and (as far as I understand) access points can only handle a small number of clients. I set the new AP to extend the current network so that the clients weren't constantly switching between different wireless networks, however as soon as this AP was configured all the wireless devices started seeing network trouble, flicking on and off. I'm assuming that this is because both APs are reasonably strong, and the client can't decide which to use. What is the best route to follow to resolve this? What I'm aiming for is wireless resiliency; preferably having two APs share the network load, or if this isn't an option then having a primary AP with a "fail-over", should the primary go down for any reason.

  Read the article

• Foraward Traffic from local machine to proxy server using iptables

  - by Vaibhav

  I am using Ubuntu Server 12.04. My IP is 192.168.4.160. I want to route the HTTP traffic generated locally from my system destined to a particular URL (say x.x.x.x) to pass through proxy server. My proxy server is 192.168.0.13:3128. I added following rule in iptables sudo iptables -t nat -A OUTPUT -p tcp -d x.x.x.x --dport 80 -j DNAT --to 192.168.0.13:3128 However, this rule does not seem to work for me. I captured packet in wireshark and I saw that packet is still going to x.x.x.x I am not very much familiar with iptables, so please try to be specific. Thanks in advance

  Read the article

• Fastest way to run a JSON server on my local machine

  - by Mohsen

  I am a front-end developer. For many experiemnets I do I need to have a server that talks JSON with my client side app. Normally that server is a simple server that response to my POSTs and GETs. For example I need to setup a server that saves, modifies and read data from a "library" database like this: POST /books create a book GET /book/:id gets a book and so on... What is the fastest and easiest technology stack for database and server in this case? I am open to use Ruby, Nodejs and anything that do the job fast and easy. Is there any framework (on any language) that do stuff like this for me?

  Read the article

• Learn How SEO Experts Services Can Help You Reach More of Your Local Customers

  What is search engine optimization or SEO? SEO is an acronym for "search engine optimization" or "search engine optimizer." We know that choosing a search engine specialist can be risky and we've even heard about some SEO consultants that used unethical... or what is known as black hat tricks.

  Read the article

• How to use a home network patch panel?

  - by Torben Gundtofte-Bruun

  I'm planning a home network in a house that's not built yet. One recommendation is to add network sockets in various rooms and have them all end in a central place, where it all connects using a network switch. So far so good. Another recommendation says to not connect everything directly to the switch, but to a patch panel which in turn is connected to the switch. I'm unsure why this is good. Is there any practical advantage of using a patch panel if you're not planning to re-wire things very often? How does a patch panel actually work? Let's say it has 24 ports. Does it have another 24 ports on the backside that go to the switch, or what? Wikipedia isn't helpful on this. Clarification: I am planning to run network cables through conduits inside the walls and terminated with network sockets in the wall (as opposed to having just conduits and long regular network cables that have a normal plug in each end). Going by RedGrittyBrick's answer, a patch panel is nearly unavoidable in that case.

  Read the article

• Report: Using Mozilla Prism to Run Web Apps like Local Apps on Linux

  Web-based applications are fantastic, except for that whole "running in the browser" thing. Looking to free your browser-based apps from your Web browsing? Take a look at Mozilla Prism.

  Read the article

• Problems with microphone and network

  - by AnoonymoouS

  Hello... very good day everybody! I'm having some problems regarding the Ubuntu 12.4.01 LTS. For this reason, cordially i ask everyone's help. Such problems can be summed up in network (01) and audio (02)! 01) I can not set a DSL network settings in the "upper bar" (on side the clock). When i create the connection, the system says that the cables modem are disconnected! I can only use the internet if i set up a connection at terminal through the command "pppoeconf". Follows the print screen of what i mentioned above:. http://i.imgur.com/8nTrF.png Obs.: Note that even after the connection "created", it does not appear there! 02) The sound is reproduced; however, can not be captured! I can not make recordings, obviously i can't use the microphone. I believe that something is giving interference or the settings are wrong! Follows the video of what i mentioned above:. http://dl.dropbox.com/u/41085750/Projeto%20Padr%C3%A3o.mp4 Obs.: I'm listening to music, so that interference errors may appear in the video. By kindness; who can help me... help me! I sought help at various sites and forums but unfortunately, i did not get success. I wait anxiously for a direction. Regards, Anoonymoous.

  Read the article

• API Class with intensive network requests

  - by Marco Acierno

  I'm working an API which works as "intermediary" between a REST API and the developer. In this way, when the programmer do something like this: User user = client.getUser(nickname); it will execute a network request to download from the service the data about the user and then the programmer can use the data by doing things like user.getLocation(); user.getDisplayName(); and so on. Now there are some methods like getFollowers() which execute another network request and i could do it in two ways: Download all the data in the getUser method (and not only the most important) but in this way the request time could be very long since it should execute the request to various urls Download the data when the user calls the method, it looks like the best way and to improve it i could cache the result so the next call to getFollowers returns immediately with the data already download instead of execute again the request. What is the best way? And i should let methods like getUser and getFollowers stop the code execution until the data is ready or i should implement a callback so when the data is ready the callback gets fired? (this looks like Javascript)

  Read the article

• Software vs Network Engineer (Salary, Difficulty, Learning, Happiness)

  - by B Z

  What are your thoughts on being a Software Engineer vs a Network Engineer? I've been on the software field for almost 10 years now and although I still have a great deal of fun (and challenges), I am starting to think it could be better on the "other" side. Not to degrade network engineers (i know there are many great ones out there), it seems (in general) their job is easier, the learning curve from average to good is not as steep, job is less stressful and pay is better on average. I think as software developer I could make the switch to networking and still enjoy working with computers and feel productive. I spend an enormous amount of time learning about software, practices, new technologies, new patters, etc...I think I could spend a much smaller amount of time learning about networking and be just as "good". What are your thoughts? EDIT: This is not about making easy money. Networking and Software are closely related, I love computers and programming, but if I can work with both, make more money and have less stress in my life and can spend more time with my family, then I am willing to consider a change and hence I am looking for advice that Do or Don't support this view.

  Read the article

• NetBeans 6.9 s'arme de fonctionnalités pour la gestion de l'environnement en local et à distance

  NetBeans 6.9 intègre de nouvelles fonctionnalités Ainsi, l'équipe a intégré : - Un terminal - Un émulateur de terminal à distance Ainsi, pour activer l'option, il suffit d'aller dans : Windows -> Output -> Terminal La console pourra être activée et vous pourrez voir ceci : [IMG]http://www.livesphere.fr/images/dvp/nb-terminal.png[/IMG] Que pensez-vous de ces fonctionnalités supplémentaires ?...

  Read the article

• Wake-on-lan only works so many times

  - by Chance

  I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

  Read the article

• Trouble printing to local printer when connected to VPN with split-tunneling enabled

  - by Marve

  I'm a volunteer network admin for a multi-tenant non-profit office space. One of our new tenants uses a VPN to connect to remote resources using RRAS and Small Business Server 2008. They also have a local network printer for the workstations in our office. When connected to the VPN, they cannot print to the local printer. I informed their network admin that they need to enable split-tunneling to fix this. Their network admin enabled split-tunneling, but apparently printing still didn't work. He told me that I need to open port 1723 on our office firewall to allow it to work. I'm just a novice administrator and not familiar with RRAS, but this doesn't sound right to me and I haven't been able to find anything on the web to validate it. Additionally, my understanding of split-tunneling is that it is handled entirely by the VPN client and should work irrespective of firewall settings. Is my understanding of the situation incorrect? What steps should I take to resolve this problem?

  Read the article

• VPN - local and remote networks IP collision

  - by Guido García

  I have created a VPN connection in Windows using the New Network Connection wizard that comes with Windows. It works without problems in most places, but there is one concrete place where, despite the connection to the remote public IP works fine, it is not able to validate the login/password and establish the VPN connection. In this place, the network is 10.0.0.x (the same I use in other places where I am able to connect). The remote network is 192.168.x.x, so I suspect there is some kind of IP collision, because before connecting, a traceroute to i.e. 192.168.0.40 does not fail. 1 4 ms 1 ms 1 ms LINKSYS [10.0.0.1] 2 5 ms 1 ms 1 ms 172.26.27.1 3 4 ms 5 ms 3 ms 192.168.1.100 ... (more) I can't modify the local network further than the first router (10.0.0.1). That is the only different I've found so far. Any idea about how to solve it? Thank you.

  Read the article

• System wide Proxy settings when on a windows network with a password

  - by sav

  I'm using Ubuntu on a windows network. I want to connect to the world wide web. I have followed the steps here which I have found very useful. However when I try to ping a website (eg: ping www.wikipedia.org) I get no reply. I can ping local computers on my network, but I need to go through our proxy to get to the world wide web. I can even browse wikipedia using firefox, I just needed to enter the proxy configuration script location and my username and password. I'm quite sure the reason I'm having this trouble is because I havn't entered a username and password. I'm not sure how to do this on a system wide level. ultimately I would like to be able to use package managers like synaptic but first I need them to be able to connect to the internet. EDIT As sugested I created a /etc/apt/apt.conf file like Acquire::http::Proxy "http://chrisav:[email protected]:8080"; Acquire::https::Proxy "https://chrisav:[email protected]:8080"; Acquire::ftp::Proxy "ftp://chrisav:[email protected]:8080"; Acquire::socks::Proxy "socks://chrisav:[email protected]:8080"; However I still cant ping wikipedia when I try installing stuff I get chris@chris-Ubuntu:~$ sudo apt-get install kate Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package kate

  Read the article

• Fastest way to set up a JSON server on my local machine [closed]

  - by Mohsen

  I am a front-end developer. For many experiements I do I need to have a server that talks JSON with my client side app. Normally that server is a simple server that response to my POSTs and GETs. For example I need to setup a server that saves, modifies and read data from a "library" database like this: POST /books create a book GET /book/:id gets a book and so on... What is the fastest to set up and easiest technology stack for database and server in this case? I am open to use Ruby, Nodejs and anything that do the job fast and easy. Is there any framework (on any language) that do stuff like this for me?

  Read the article

• Manually updating HTML5 local storage?

  - by hustlerinc

  I'm just starting out HTML5 game developement (and game dev in general) and watching all the videos and tutorials available something has crossed my mind. Everyone keep saying I should set the cookie's (or cached files) to be expired after a certain amount of time. So that when it reaches that time the browser automatically downloads all assets again, even if it's the same asset's. Wouldn't it be possible to manually define the version of the game? For example the user has downloaded all the files for 1.01 of the game, when updating I change a simple variable to 1.02. When the user logs in it would compare his version to the current and if they are not equal only then it downloads the files? This could even be improved to download only specific files depending on what needs to be updated? Would this be possible or am I just dreaming? What are the possible downsides of this approach?

  Read the article

• Does anyone know how to "tcpdump" traffic decrypted by Mallory MITM? [migrated]

  - by chriv

  I'm looking for some help in capturing network traffic that I can analyze in Wireshare (or other tools). The tool I'm using is mallory. If anyone is familiar with mallory, I could use some help. I've got it configured and running correctly, but I don't know how to get the output that I want. The setup is on my private network. I have a VM (running Ubuntu 12.04 - precise) with two NICs: eth0 is on my "real" network eth1 is only on my "fake" network, and is using dnsmasq (for DNS and DHCP for other devices on the "fake" network) Effectively eth0 is the "WAN" on my VM, and eth1 is the "LAN" on my VM. I've setup mallory and iptables to intercept, decrypt, encrypt and rewrite all traffic coming in on destination port 443 on eth1. On the device I want intercepted, I have imported the ca.cer that mallory generated as a trusted root certificate. I need to analyze some strange behavior in the HTTPS stream between the client and server, so that's why mallory is setup in between for this MITM. I would like to take the decrypted HTTPS traffic and dump it to either a logfile or a socket in a format compatible with tcpdump/wireshark (so I can collect it later and analyze it). Running tcpdump on eth1 is too soon (it's encrypted), and running tcpdump on eth2 is too late (it's been re-encrypted). Is there a way to make mallory "tcpdump" the decrypted traffic (in both directions)?

  Read the article

• Virtual IPv6 Network between VirtualBox VMs

  - by Ben

  I'm trying to create a virtual IPv6 network as a test environment. I have 5 VirtualBox VMs (Ubuntu Server) with network adapters using host-only networking. You can imagine them being connected in series and every machine connects 2 subnets. I want to ping the last machine from the first one: On: 2001:db8:aaaa::100 I want to ping 2001:db8:dddd::101 (Note: there is no cccc network in between) Only static configuration and routes are used: /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::100 netmask 64 /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::101 netmask 64 auto eth1 iface eth1 inet6 static address 2001:db8:bbbb::100 netmask 64 up ip -6 route add 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 down ip -6 route del 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 I thought there might be some automatic route discovery going on. Anyway, ping6 2001:db8:dddd::100 will not work from aaaa::100 When I add the route: ip -6 route add 2001:db8:dddd::/64 via 2001:db8:aaaa::101 it will work. But the next interface in the same network dddd::101 is not reachable. How could that be? There is a machine with an interface bbbb::101 and another dddd::100 and I can ping the latter one, but the machine connected to it, dddd::101 not?? I also have also turned on forwarding. Any ideas?

  Read the article

• SQL Server 2008 and 2008 R2 Integration Services - Managing Local Processes Using Script Task

  SQL Server 2008 R2 Integration Services includes a number of predefined tasks that implement common administrative actions to help with data extraction, transformation and loading (ETL). While in a majority of cases they are sufficient to deliver required functionality, there might be situations where an extra level of flexibility is desired. NEW! SQL Monitor 2.0Monitor SQL Server Central's servers withRed Gate's new SQL Monitor.No installation required. Find out more.

  Read the article

• How to mount private network shares on login?

  - by bainorama

  I've read all the existing entries I could find on using pam_mount but none of them seem to work for me. I'm trying to automatically mount shares on my local NAS at user login time. The usernames and passwords on my NAS shares match my local user name and password, but there is no LDAP/AD server. My pam_mount.conf has the following: <volume fstype="cifs" server="bain-brain" path="movies" user="*" sgrp="bains" mountpoint="/home/%(USER)/movies" options="user=%(USER),dir_mode=0700,file_mode=700,nosuid,nodev" /> When I login, I see the following in /var/log/auth.log: Oct 13 10:21:26 bad-lattitude lightdm: pam_mount(misc.c:380): 29 20 0:20 / /home/alastairb/movies rw,nosuid,nodev,relatime - cifs //bain-brain/movies rw,sec=ntlm,unc=\\bain-brain\movies,username=alastairb,uid=1000,forceuid,gid=1000,forcegid,addr=10.1.1.12,file_mode=01274,dir_mode=0700,nounix,serverino,rsize=61440,wsize=65536,actimeo=1 The folder /home/alastairb/movies is present but empty (can't see the files which are on the NAS in the respective share folder). In Nautilus, the share is shown in the sidebar under "Computer", and clicking on this takes me to the correct folder, but again, its empty. Any ideas as to what I'm doing wrong?

  Read the article

• Automatically keep your local git repos clean

  - by kerry

  Most developers using git are probably aware of a command ‘git gc’ that has to be run from time to time when you notice your git commands are running a little slow. This command cleans up your git repo and makes sure everything is nice and tidy. If you have not run this command lately, you will notice a huge performance increase in your git commands after running. It’s a bit annoying to have to run this command when you notice that your git performance is suffering. The command also takes a while if you have not run it recently. With this in mind, I decided to create a method to automatically run this command from time to time. So I decided to overload cd similar to how rvm does. All you have to do is paste the method in your .profile file and it will run the command every time you enter a directory with a git repo. You’ll notice a little pause when entering the directory, it’s not insufferable but if you would prefer, you can add an & to the end of the command to have it run in the background. I chose the pause over the pid output of the background command. Here it is in all it’s glory. View the code on Gist.

  Read the article

• My local ubuntu server is not updated

  - by Rakesh Manandhar

  I am from Nepal and it's faster to download apps from server for nepal using through ubuntu software center. But when i use np.archive.ubuntu.com server. There is no updated softwares and few softwares and nvidia driver are outdated. for e.g. i cannot even install openshot when i user server for nepal. It provides error which cannot be solved. I want to know how can the server for nepal be updated frequently with us.archive.ubuntu.com. i use ubuntu 12.10. and i want to use server for nepal since the download speed faster than 2x than from us server.

  Read the article

• Serializing network messages

  - by mtsvetkov

  I am writing a network wrapper around boost::asio and was wondering what is a good and simple way to serialize my messages. I have a message factory which can take care of dispatching the data to the correct builder, but I want to know if there are any established solutions for getting the binary data on the sender side and consequently passing the data for deserialization on the receiver end. Some options I've explored are: passing a pointer to a char[] to the serialize/deserialize functions (for serialize to write to, and deserialize to read from), but it's difficult to enforce buffer size this way; building on that, I decided to have the serialize function return a boost::asio::mutable_buffer, however ownership of the memory gets blurred between multiple classes, as the network wrapper needs to clean up the memory allocated by the message builder. I have also seen solutions involving streambuf's and stringstream's, but manipulating binary data in terms of its string representation is something I want to avoid. Is there some sort of binary stream I can use instead? What I am looking for is a solution (preferrably using boost libs) that lets the message builder dictate the amount of memory allocated during serialization and what that would look like in terms of passing the data around between the wrapper and message factory/message builders. PS. Messages contain almost exclusively built-in types and PODs and form a shallow but wide hierarchy for the sake of going through a factory. Note: a link to examples of using boost::serialization for something like this would be appreciated as I'm having difficulties figuring out the relation between it and buffers.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >