Search Results

Search found 5499 results on 220 pages for 'logitech mouse'.

Page 68/220 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• External USB 3 drive not recognized

  - by ilan123

  Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

  Read the article

• Why does my sprite glitch when moving? [closed]

  - by rphello101

  Using Slick 2D/Java, I'm using the mouse to rotate a sprite and WASD to move it (A and D are used to strafe). I finally got the directional keys and rotation to work in sync, but I'm having problems with sporadic movement. It seems that the move speed is not always set to the value I have it at. Sometimes the sprite with just shoot across the screen. Furthermore, it seems that at 0 degrees, when the left key is pressed, the sprite moves backwards, not to the left. There also seems to be quite a bit of glitching when two keys are pressed, like left and up. Anyone see anything obvious? Here is the rotational code: int mX = Mouse.getX(); int mY = HEIGHT - Mouse.getY(); int pX = sprite.x+sprite.image.getWidth()/2; int pY = sprite.y+sprite.image.getHeight()/2; double mAng; if(mX!=pX){ mAng = Math.toDegrees(Math.atan2(mY - pY, mX - pX)); if(mAng==0 && mX<=pX) mAng=180; } else{ if(mY>pY) mAng=90; else mAng=270; } sprite.angle = mAng; sprite.image.setRotation((float) mAng); Movement code: Input input = gc.getInput(); Vector2f direction = new Vector2f(); Vector2f velocity = new Vector2f(); Vector2f left; Vector2f right; direction.x = (float) Math.cos(Math.toRadians(sprite.angle)); direction.y = (float) Math.sin(Math.toRadians(sprite.angle)); if(direction.length()>0) direction = direction.normalise(); left = new Vector2f(-direction.y, direction.x); right = new Vector2f(direction.y, -direction.x); velocity.x = (float) (direction.x * sprite.moveSpeed); velocity.y = (float) (direction.y * sprite.moveSpeed); if(input.isKeyDown(sprite.up)){ sprite.x += velocity.x*delta; sprite.y += velocity.y*delta; }if (input.isKeyDown(sprite.down)){ sprite.x -= velocity.x*delta; sprite.y -= velocity.y*delta; }if (input.isKeyDown(sprite.left)){ sprite.x += left.x * sprite.moveSpeed * delta; sprite.y += left.y * sprite.moveSpeed * delta; }if (input.isKeyDown(sprite.right)){ sprite.x += right.x * sprite.moveSpeed * delta; sprite.y += right.y * sprite.moveSpeed * delta; }

  Read the article

• Remmina remote control: black screen after XBMC exit

  - by Tinellus

  I have a HTPC (Quietpc Sidewinder Fanless media pc) running Ubuntu 12.04 and autostarting XBMC Frodo. I'm remote controlling this machine using my laptop also running Ubuntu 12.04 and using Remmina VNC as a client. Everything works perfectly as long as XBMC is running: I can see the remote screen and control via mouse and keyboard on the laptop. However, when XBMC is stopped on the HTPC, my TV shows the Ubuntu desktop normally, but the screen on the laptop turns black. I'm however still controlling the HTPC since I can see the arrow moving upon laptop mouse movement, and I can still type text in the HTPC. Oddly, when the screensaver on the HTPC kicks in, I again have a visual on the laptop. Anyone any thoughts on this? What should I do to maintain visual after stopping XBMC? Any suggestions much appreciated. Thanks!

  Read the article

• Keyboard doesn't work with Tor Browser

  - by marijo

  I use the actual Tor Browser 2.3.25-14 and Ubuntu 13.10 (Saucy Salamander). I start Tor in the command-line window (./start-tor-browser). The cable less keyboard and mouse (Logitech) are working, the Vidalia control panel opens, after having connected to the Tor network, the Tor Browser window (Firefox) opens automatically. The onion is green, everything ok. But the keyboard doesn't work in the Tor Browser window, the mouse, yes, does work. When I close Tor with the Vidalia control panel and open another application, the keyboard works again. Is there somebody who can help me or at least understands the problem? Thanks a lot!

  Read the article

• 3d vertex translated onto 2d viewport

  - by Dan Leidal

  I have a spherical world defined by simple trigonometric functions to create triangles that are relatively similar in size and shape throughout. What I want to be able to do is use mouse input to target a range of vertices in the area around the mouse click in order to manipulate these vertices in real time. I read a post on this forum regarding translating 3d world coordinates into the 2d viewport.. it recommended that you should multiply the world vector coordinates by the viewport and then the projection, but they didn't include any code examples, and suffice to say i couldn't get any good results. Further information.. I am using a lookat method for the viewport. Does this cause a problem, and if so is there a solution? If this isn't the problem, does anyone have a simple code example illustrating translating one vertex in a 3d world into a 2d viewspace? I am using XNA.

  Read the article

• Windows move to external monitor when closing lid

  - by Martijn

  I'm using Cinnamon (on 12.10) on a laptop (Compaq 6710b business model) with an external monitor. Both screens run at 1680 x 1050, the external monitor is located on the right. During normal operation everything works fine; windows open in whatever monitor my mouse pointer is when they open and I can freely drag them to the other monitor. When I close the lid of my laptop both displays shut down as expected. When I open the lid, however, the lock window opens on the external monitor and any windows that were open on the laptop screen have moved to the external monitor as well. Nothing happens between closing the lid and opening it; no suspend, powerdown, hibernate or anything, monitor stays attached; even mouse is untouched (pointer on laptop screen). Is there any way to fix it so my windows stay on whatever monitor I left them before closing the lid? Alternative solutions are welcome.

  Read the article

• Camera closes in on the fixed point

  - by V1ncam

  I've been trying to create a camera that is controlled by the mouse and rotates around a fixed point (read: (0,0,0)), both vertical and horizontal. This is what I've come up with: camera.Eye = Vector3.Transform(camera.Eye, Matrix.CreateRotationY(camRotYFloat)); Vector3 customAxis = new Vector3(-camera.Eye.Z, 0, camera.Eye.X); camera.Eye = Vector3.Transform(camera.Eye, Matrix.CreateFromAxisAngle(customAxis, camRotXFloat * 0.0001f)); This works quit well, except from the fact that when I 'use' the second transformation (go up and down with the mouse) the camera not only goes up and down, it also closes in on the point. It zooms in. How do I prevent this? Thanks in advance.

  Read the article

• How can I make the draggable window border thicker, without changing the appearance?

  - by Bruce Connor

  When you want to resize a window in gnome (as well as in other systems) you can click-and-hold at the window's border and than drag it. The problem is (and do correct me if I'm wrong here) that the draggable border is just a couple of pixels thick in gnome. That tends to be a little frustrating, and contributes to my wrist pains from using the mouse, as it requires very careful movement of the mouse. How can I change the thickness of the area I can click in order to resize a window? I don't want to increase the appearance of the window border, I'm not talking about eye candy here. I want to fine tune this functionality where I can resize a window by dragging its border. Is there a setting somewhere that will change this?

  Read the article

• Hide element if displayed (a little complex case)

  - by Ricardo

  Hello, I have a list of radio buttons that are inside a DIV called "radio-btns-wrapper-wjs", this DIV slides down/up when you click on a 'trigger' element, in my case a < span with the class "selected-search-wjs". The DIV "radio-btns-wrapper-wjs" slides back up when the user selects one of the radio buttons. This DIV also slides back up when the user does not take any action (does not select a radio button) but has already moved his mouse over "radio-btns-wrapper-wjs" DIV and then moves it out. So far, so good. What I need is to have the same DIV, "radio-btns-wrapper-wjs", slide back up when the user moves his mouse out from the < span "selected-search-wjs" element but NOT if the user moves his mouse over the DIV "radio-btns-wrapper-wjs". The thing is that is that if do this: $('.selected-search-wjs').mouseleave(function() { $('.radio-btns-wrapper-wjs').slideUp(); }); The DIV with the radio buttons, "radio-btns-wrapper-wjs", slides back up as soon as I leave that DIV to select a radio button. I need a condition that says something like: "Hide the DIV "radio-btns-wrapper-wjs" if the user hovers over you and then hovers out. Also, hide this same DIV if the user moves his mouse away from the < span "selected-search-wjs", but NOT if he moves his mouse over the DIV "radio-btns-wrapper-wjs"." Does all this make sense? Here's my HTML: <div class="radio-btns-wjs"><span class="selected-search-wjs">&nbsp;</span> <div class="radio-btns-wrapper-wjs"> <label> <input type="radio" name="rb" value="all" id="all"> All</label> <label> <input type="radio" name="rb" value="ln" id="ln"> Option 1</label> <label> <input type="radio" name="rb" value="prodsandserv" id="prodsandserv"> Option 2</label> <label> <input type="radio" name="rb" value="publications" id="publications"> Option 3</label> <label> <input type="radio" name="rb" value="comm" id="comm"> Option 4</label> <label> <input type="radio" name="rb" value="lweb" id="lweb"> Option 5</label> </div> </div> My jQuery: //This slides up/down the DIV with the radio buttons $('.selected-search').addClass('selected-search-wjs').removeClass('selected-search').append('Please Select&hellip;').click(function() { $('.radio-btns-wrapper-wjs').slideToggle('fast'); }); //This hides the DIV with the radio buttons, if the user has hovered over it $('.radio-btns-wrapper-wjs').mouseleave(function() { $(this).slideUp(); }); As you can see I'm very new to jQuery, but this is way over my head now. Any help is greatly appreciated. Here's a live example: http://jsfiddle.net/t2HkQ/3/ Thanks.

  Read the article

• Desktop PC does not power up on power button

  - by hIpPy

  When I press the power button on my desktop, it does not power up completely. Before I press the power button, I see lights on the motherboard. Everything is normal. On power button press, the fans on the cpu, graphics card and motherboard start to spin a little for a second or two and then they stop. No beeps during this process. It has been doing this for a while now but it used to start up after some trials. Once it starts up, I have NO issues at all like random shutdowns so it is not an issue with OS. I'm just guessing here but it seems as if the PSU (Antec TP2-550ATX) is dying out and does not have enough power now - just a guess. It's an old desktop assembled in 2005 but I have maintained it well. Any ideas? Please help. Thanks. Below is the complete configuration. DFI LAN-Party UT NF4 Ultra-D 6/23 {6.70}, Evercool EC-VC-RE 41/47C, AMD Opteron 170 2.0GHz {1.3.2.16} 1.312V 36/41C, ThermalRight SI-120, Panaflo 120×38mm OCZ Platinum 2×1GB 200MHz 2.66V 3-3-2-7 1T XFX 7800GTX 256MB 475/1250MHz {91.31}, Zalman VF900 Cu led 41/56C WD Caviar 320GB 7200RPM 16MB SATA 3Gb/s Antec TP2-550ATX Antec P180 WinXP sp2 KB896256 Logitech MX310 Razer Mantis Speed BenQ FP91G+ 19" LCD 8ms DVI Creative Audigy2 ZS {4.42} BenQ DW1640 Logitech z-5300e 5.1 280W Legend: Driver versions: {} User settings: [] Voltage: V Wattage: W Temperature: C (Celsius) min/max

  Read the article

• Ubuntu 12.10 "Turn screen off when inactive for: Never" still turns off

  - by Will

  After a fresh install of Ubuntu 12.10, my screen still goes off after about ten minutes. I've been to the Brightness and Lock control panel. The Turn screen off when inactive for: setting is set for Never. I've been through the dconf Editor searching for power, screen, and idle changing parameters. This doesn't seem to have any effect on the display timeout. Here's one more interesting thing, the screen doesn't go off, per se. It just goes black. Meaning, the back lighting is still on, and all the pixels are black. When it goes black, it does a very pleasant quick dim to black. Similarly, it quickly un-dim's after a key press, mouse movement, or mouse click. So, I'm feeling this is more of a software setting the timeout, not a power saving function.

  Read the article

• How To Prevent Your Computer From Waking Up Accidentally

  - by Chris Hoffman

  If you find your Windows computer waking from sleep for no apparent reason, your computer is either being woken up by a hardware device – such as your mouse — or scheduled task set to wake your computer. In some cases, the cause may not be obvious. For example, if your laptop occasionally wakes up for no apparent reason, it’s possible that the floor is shaking a bit, causing the mouse to vibrate slightly and wake the computer. Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For? HTG Explains: What is DNS?

  Read the article

• 3D terrain map with Hexagon Grids (XNA)

  - by Rob

  I'm working on a hobby project (I'm a web/backend developer by day) and I want to create a 3D Tile (terrain) engine. I'm using XNA, but I can use MonoGame, OpenGL, or straight DirectX, so the answer does not have to be XNA specific. I'm more looking for some high level advice on how to approach this problem. I know about creating height maps and such, there are thousands of references out there on the net for that, this is a bit more specific. I'm more concerned with is the approach to get a 3D hexagon tile grid out of my terrain (since the terrain, and all 3d objects, are basically triangles). The first approach I thought about is to basically draw the triangles on the screen in the following order (blue numbers) to give me the triangles for terrain (black triangles) and then make hexes out of the triangles (red hex). http://screencast.com/t/ebrH2g5V This approach seems complicated to me since i'm basically having to draw 4 different types of triangles. The next approach I thought of was to use the existing triangles like I did for a square grid and get my hexes from 6 triangles as follows http://screencast.com/t/w9b7qKzVJtb8 This seems like the easier approach to me since there are only 2 types of triangles (i would have to play with the heights and widths to get a "perfect" hexagon, but the idea is the same. So I'm looking for: 1) Any suggestions on which approach I should take, and why. 2) How would I translate mouse position to a hexagon grid position (especially when moving the camera around), for example in the second image if the mouse pointer were the green circle, how would I determine to highlight that hexagon and then translating that into grid coordinates (assuming it is 0,0)? 3) Any references, articles, books, etc - to get me going in the right direction. Note: I've done hex grid's and mouse-grid coordinate conversion before in 2d. looking for some pointers on how to do the same in 3d. The result I would like to achieve is something similar to the following: http :// www. youtube .com / watch?v=Ri92YkyC3fw (sorry about the youtube link, but it will only let me post 2 links in this post... same rep problem i mention below...) Thanks for any help! P.S. Sorry for not posting the images inline, I apparently don't have enough rep on this stack exchange site.

  Read the article

• GNOME 3.4 released, with smooth & fast magnification

  - by Peter Korn

  The GNOME community released GNOME 3.4 today. This release contains several new accessibility features, along with a new set of custom high-contrast icons which improve the user experience for users needing improved contrast. This release also makes available the AEGIS-funded GNOME Shell Magnifier. This magnifier leverages the powerful graphics functionality built into all modern video cards for smooth and fast magnification in GNOME. You can watch a video of that magnifier (with the previous version of the preference dialog), which shows all of the features now available in GNOME 3.4. This includes full/partial screen magnification, a magnifier lens, full or partial mouse cross hairs with translucency, and several mouse tracking modes. Future improvements planned for GNOME 3.6 include focus & caret tracking, and a variety of color/contrast controls.

  Read the article

• 11.10 runs really choppy and slow, but not if I choose "Gnome Classic"

  - by Ingram

  I'd like to use Unity with Ubuntu 11.10, but everything from Unity runs really choppy and slow. I have an ATI graphics card and I have installed the drivers through "Additional Drivers". The drivers work, as I can play 3d games flawlessly. When I drag the mouse box around or drag windows around, it is really choppy. I previously had Ubuntu 10.10 and everything worked fine. I installed gnome 3 on 11.10 and it does the same thing Unity does, very choppy and slow graphics. However, if I choose Gnome Classic, everything is fine. I can drag the mouse box all around with no problems. I can drag windows around and it looks and feels great. Is this a bug with Unity? Are others experiencing this? Or is there something I can do to fix this?

  Read the article

• How do I fix dragging windows to the adjacent workspace?

  - by Bill O'Dwyer

  I installed CompizConfig-Settings-Manager and I put on all the settings I liked and had in 11.10, including the ability to drag my windows to the adjacent workspace. It's under the Desktop Wall section, on the Edge Flipping tab and I've checked "Edge Flip Move" and "Edge Flip DnD." In 11.10, the movement was smooth between each workspace, and the window would still be "grabbed" in the same place. In 12.04, it's leaving the window behind and the mouse appears to be "grabbing" nothing, but I'm still holding onto the window, and I can still move and place it within the workspace (or indeed the previous workspace as it won't appear in the desired place until I drag the mouse all the way to the edge of the screen). Any way to fix this? I'm running 12.04 beta 2.

  Read the article

• Desktop PC does not power up on power button

  - by hIpPy

  When I press the power button on my desktop, it does not power up completely. Before I press the power button, I see lights on the motherboard. Everything is normal. On power button press, the fans on the cpu, graphics card and motherboard start to spin a little for a second or two and then they stop. No beeps during this process. It has been doing this for a while now but it used to start up after some trials. Once it starts up, I have NO issues at all like random shutdowns so it is not an issue with OS. Update: I left the desktop off for a few days and it started. I'm just guessing here but it seems as if the PSU (Antec TP2-550ATX) is dying out and does not have enough power now - just a guess. It's an old desktop assembled in 2005 but I have maintained it well. Update: I always keep the desktop running and I never shut it down. During updates or manual restarts, it powers up without issues. I wonder if this sheds lights on the issue. Any idea how I can narrow down the issue? ex: if I can find if the PSU is dying etc. I'd really like to fix the issue. Please help. Thanks. Below is the complete configuration. DFI LAN-Party UT NF4 Ultra-D 6/23 {6.70}, Evercool EC-VC-RE 41/47C, AMD Opteron 170 2.0GHz {1.3.2.16} 1.312V 36/41C, ThermalRight SI-120, Panaflo 120×38mm OCZ Platinum 2×1GB 200MHz 2.66V 3-3-2-7 1T XFX 7800GTX 256MB 475/1250MHz {91.31}, Zalman VF900 Cu led 41/56C WD Caviar 320GB 7200RPM 16MB SATA 3Gb/s Antec TP2-550ATX Antec P180 WinXP sp3 Logitech MX310 Razer Mantis Speed BenQ FP91G+ 19" LCD 8ms DVI Creative Audigy2 ZS {4.42} BenQ DW1640 Logitech z-5300e 5.1 280W Legend: Driver versions: {} User settings: [] Voltage: V Wattage: W Temperature: C (Celsius) min/max

  Read the article

• Laptop works fine with ac adapter, hangs after login screen using battery

  - by tavoton

  I did an Ubuntu 10.10 Desktop Edition clean install (amd64 version) on a notebook Medion Akoya E1311. With AC adapter everything works fine, but using battery, it hangs after login screen. I can type login, password too, and I can press login button. But then I can see mouse cursor and lower task bar, not upper, and nothing works. The only thing I can do is login on a terminal with ctrl+alt+F1, this is ok. Nothing seems alive on Gnome except mouse cursor. The only thing I did after Ubuntu fresh install was donwloading driver for RTL8191SE from Realtek web, because WiFi didn't work, now works fine, with ac adapter of course. Hardware is a Notebook Medion Akoya E1311 AMD Sempron 210U 1 GB DDR2 ATI RS690M (Radeon X1200 Series) Western Digital 160GB wireless RTL8191SEvB ethernet RTL8101E/RTL8102E

  Read the article

• Creating Rectangle-based buttons with OnClick events

  - by Djentleman

  As the title implies, I want a Button class with an OnClick event handler. It should fire off connected events when it is clicked. This is as far as I've made it: public class Button { public event EventHandler OnClick; public Rectangle Rec { get; set; } public string Text { get; set; } public Button(Rectangle rec, string text) { this.Rec = rec; this.Text = text; } } I have no clue what I'm doing with regards to events. I know how to use them but creating them myself is another matter entirely. I've also made buttons without using events that work on a case-by-case basis. So basically, I want to be able to attach methods to the OnClick EventHandler that will fire when the Button is clicked (i.e., the mouse intersects Rec and the left mouse button is clicked).

  Read the article

• Sound card stop responding

  - by Merianos Nikos

  A few days ago I installed the latest version of Ubuntu in a computer of mine, that it has installed the "Sound Blaster Audigy 2ZS". After the installation and up to yesterday everything was excelent. Yesterday I installed the latest Ubuntu updates and today I had several issues. First the mouse was not responed as should be, but after restarted my computer everything was fine with mouse. Next was my sound card. For now I do not have sound at all :( I don't really know what's wrong. Does anybody has any idea on how to solve that issue, or from where to start, to find a solution ? If there is no any available solution for that issue, can I remove the latest updates that installed yesterday ? Kind regards Merianos Nikos

  Read the article

• Display turns off when watching videos (then video starts to lag), how to fix it?

  - by Bad Learner

  Okay, here's the thing - - On my Ubuntu 11.10 64-bit installation, I have the display set to turn off automatically after 3 minutes of inactivity. There are two problems now: the display turns off even when I am watching videos. But I don't want to keep fiddling my mouse or keyboard when I am watching a movie. Okay, like I said above, the display turns off, then I move the mouse a bit each time, and the display turns back on. But now, the video doesn't play properly, it lags. A lot actually. Are these issues common? Can these be fixed?

  Read the article

• Radeon HD5670 hangs after login

  - by pKaresz

  Thanks in advance for your advices. I installed, Ubuntu 12.04 today, on my PC with a Radeon hd5670 graphics card. The first error I encountered, (just like the first time Unity came out - after witch I waited to try Ubuntu again until now) is, that it hanged after login at the desktop wallpaper, with only the mouse cursor. Well actually the first problem was with the live CD, but I managed to install it, using the install now, not the try now. Live CD has the same problem, as after install. So, after installing and getting the error, I searched of course before asking this:) I found this: Ubuntu hangs at purple screen The accepted answer there helped me to get to this. (note, that the below picture is a screen taken from a working desktop, and then erased the parts that don't show on mine.) Note that there is nothing at the top except the brown bar. No shutdown button, no nothing. The system hangs, I can't click on anything, I can only wiggle around with my mouse XD

  Read the article

• C++: Checking if an object faces a point (within a certain range)

  - by bojoradarial

  I have been working on a shooter game in C++, and am trying to add a feature whereby missiles shot must be within 90 degrees (PI/2 radians) of the direction the ship is facing. The missiles will be shot towards the mouse. My idea is that the ship's angle of rotation is compared with the angle between the ship and the mouse (std::atan2(mouseY - shipY, mouseX - shipX)), and if the difference is less than PI/4 (45 degrees) then the missile can be fired. However, I can't seem to get this to work. The ship's angle of rotation is increased and decreased with the A and D keys, so it is possible that it isn't between 0 and 2*PI, hence the use of fmod() below. Code: float userRotation = std::fmod(user->Angle(), 6.28318f); if (std::abs(userRotation - missileAngle) > 0.78f) return; Any help would be appreciated. Thanks!

  Read the article

• Is there a way to emulate pinch-zoom?

  - by aking1012

  I'm looking for a way to emulate pinch zoom in either an android emulator(android SDK-less desirable) or a (preferred) native Ubuntu web browser that I can resize to a specified size for initial testing of HTML5 applications. This is would be useful for first round testing during cross-platform application development. Note: I'm trying to do this with no real touch-device only a mouse. So the best answer would be something like "Install this chromium plug-in and use this hotkey to set pinch points" or something similar. We already have this for getting dual mouse working(thanks AmithKK). The browser that supports multi-touch is the hard part. Something to note is that I start getting screen artifacts using multiple mice via that guide. They're mild and tolerable, but they are there.

  Read the article

• Using shortkeys to search the internet for a term selected in a text editor/viewer

  - by cipricus

  It seems possible (as I learned from a comment to this question made by user55822) to use a command in order to search a term on the web by using "keybinding" the way Aretha is used. What the aforementioned user says is that "you could search mouse selection anywhere by using an app like Artha, or by keybinding sh -c 'firefox "http://translate.google.com/#en/fr/$(xclip -o)"' (example given translate english into french)" A lot of things are obscure for me here. I could use Artha or keybinding (as alternative), or both? How to do that in each case? and "The command I gave you will open google translate in Firefox with your mouse selection (text highlighted) as a query. Use sh -c 'firefox "https://www.google.com/search?q=$(xclip -o)"' if you want regular Google over Google translate. And obviously, that would work everywhere" I do not know what to do with that formula. What should I do exactly? How to use it? In what application?

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >