Search Results

Search found 4679 results on 188 pages for 'oem computers'.

Page 68/188 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Static IP settings on Windows 2003 server not getting saved

  - by Prashant Mandhare

  We have a Dell PowerEgde 1950 server with Broadcom NetXtreme gigabit ethernet card, and we are facing a strange problem with static IP assignment. When we assign a static IP to this broadcom NIC, settings are not getting saved. Following are the steps to reproduce problem open TCP/IP properties window for broadcom NIC manually enter static IP address and other details like gateway, DNS, etc. apply and close properties dialog. re-open TCP/IP properties windows, you will see your static IP settings lost and changed to "obtain IP address manually" but when checked using ipconfig command, you will still see your same static IP settings but, when checked using ipconfig command after rebooting server, these static ip settings are completely gone and automatically obtained IP is assigned Supplementary information: Recently we had formatted this server and installed windows 2003 from OEM windows setup CD (not from OS installation CD received from Dell). After windows installation was over, broadcom NIC drivers were installed.

  Read the article

• WMI permissions: Select CommandLine, ProcessId FROM Win32_Process returns no data for CommandLine

  - by user57935

  Hi all, I am gathering performance data via WMI and would like to avoid having to use an account in the Administrators group for this purpose. The target machine is running Windows Server 2003 with the latest SP/updates. I've done what I believe to be the appropriate configuration to allow our user access to WMI (similar to what is described here: http://msdn.microsoft.com/en-us/library/aa393266.aspx). Here are the specific steps that were followed: Open Administrative Tools - Computer Management: Under Computer Management (Local) Expand Services and Applications, right click WMI Control and select properties. In the Security tab, expand Root, highlight CIMV2, click Security (near bottom of window); add Performance Monitor Users and enable the options : Enable Account and Remote Enable. ­Open Administrative Tools - Component Services: Under Console Root go to Component Services- Computers - Right click My Computer and select properties, select the COM security tab, in “Access Permissions” click "Edit Default" select(or add then select) “Performance Monitor Users” group and allow local access and remote access and click ok. In “Launch and Activation Permissions” click “Edit Default” select(or add then select) “Performance Monitor Users” group and allow Local and Remote Launch and Activation Permissions. ­Open Administrative Tools - Component Services: Under Console Root go to Component Services- Computers - My Computer - DCOM Config - highlight “Windows Management and Instrumentation” right click and select properties, Select the Security tab, Under “Launch and Activation Permissions” select Customize, then click edit, add the “Performance Users Group” and allow local and remote Remote Launch and Remote Activation privileges. I am able to connect remotely via WMI Explorer but when I perform this query: Select CommandLine, ProcessId FROM Win32_Process I get a valid result but every row has an empty CommandLine. If I add the user to the Administrators group and re-run the query, the CommandLine column contains the expected data. It seems there is a permission I am missing somewhere but I am not having much luck tracking it down. Many thanks in advance.

  Read the article

• WMI permissions: Select CommandLine, ProcessId FROM Win32_Process returns no data for CommandLine

  - by user57935

  I am gathering performance data via WMI and would like to avoid having to use an account in the Administrators group for this purpose. The target machine is running Windows Server 2003 with the latest SP/updates. I've done what I believe to be the appropriate configuration to allow our user access to WMI (similar to what is described here: http://msdn.microsoft.com/en-us/library/aa393266.aspx). Here are the specific steps that were followed: Open Administrative Tools - Computer Management: Under Computer Management (Local) Expand Services and Applications, right click WMI Control and select properties. In the Security tab, expand Root, highlight CIMV2, click Security (near bottom of window); add Performance Monitor Users and enable the options : Enable Account and Remote Enable. ­Open Administrative Tools - Component Services: Under Console Root go to Component Services- Computers - Right click My Computer and select properties, select the COM security tab, in “Access Permissions” click "Edit Default" select(or add then select) “Performance Monitor Users” group and allow local access and remote access and click ok. In “Launch and Activation Permissions” click “Edit Default” select(or add then select) “Performance Monitor Users” group and allow Local and Remote Launch and Activation Permissions. ­Open Administrative Tools - Component Services: Under Console Root go to Component Services- Computers - My Computer - DCOM Config - highlight “Windows Management and Instrumentation” right click and select properties, Select the Security tab, Under “Launch and Activation Permissions” select Customize, then click edit, add the “Performance Users Group” and allow local and remote Remote Launch and Remote Activation privileges. I am able to connect remotely via WMI Explorer but when I perform this query: Select CommandLine, ProcessId FROM Win32_Process I get a valid result but every row has an empty CommandLine. If I add the user to the Administrators group and re-run the query, the CommandLine column contains the expected data. It seems there is a permission I am missing somewhere but I am not having much luck tracking it down. Many thanks in advance.

  Read the article

• Have I bricked my Sun V20z?

  - by David Mackintosh

  I have a small pile of Sun V20z computers. I was trying to update the SP and BIOS firmwares in order to bring them all up to the same standard -- mostly to get the updated (ie actually useful) SP functionality, and figured that I would just do the BIOS while I was at it. For three of the four computers, it worked perfectly. However after the BIOS update, the fourth system won't boot. I did this: batch05-mgmt $ sp get mounts Local Remote /mnt 10.16.0.8:/export/v20z batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Bios Flash Transmit Started Bios Flash Transmit Complete Bios Flash update Progress: 7 Bios Flash update Progress: 6 Bios Flash update Progress: 5 Bios Flash update Progress: 4 Bios Flash update Progress: 3 Bios Flash update Progress: 2 Bios Flash update Progress: 1 Bios Flash update complete batch05-mgmt $ platform set power state on This command may take several minutes. Please be patient. After an hour of waiting, it still won't start. The chassis powers on, but beyond the fans spinning up and the hardware POST of the drives, nothing appears to happen. So if I try to re-flash the BIOS (on the theory that maybe something went wrong): batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Error. The operation timed out. Have I bricked it?

  Read the article

• Upgrade from Vista 32 to Vista 64

  - by Lance Fisher

  I just ordered a laptop, and it came with Vista Home Premium 32. I want Vista Home Premium 64 on it. I'm planning a reinstall. Does anyone know if my product key for Vista 32 will also work for Vista 64 for an OEM copy? As far as I know, I just need to get the 64 bit media. Is this correct? Thanks. Update The laptop is a Dell XPS M1330, and its hardware is supported. Dell would even sell it with 64 bit. However, it was significantly more expensive for lower specs, and I couldn't get it in red.

  Read the article

• Buying replacement Macbook Pro Battery - Genuine vs. eBay

  - by Nicolas Webb

  I'm looking to replace my Macbook Pro's battery (15", last model before the Unibody). It's currently at 55% capacity (as reported in System Information and Battery Health Monitor). I've reset the SMC firmware, calibrated the battery, and it's just not lasting that long anymore. I've seen some genuine replacements that are "pulls" (pulled from used computers) that are rated at least 90% capacity (iFixit, MacSales). I've also seen a variety of batteries on eBay that look more like clones than genuine batteries, but are new. A new battery from Apple is $129, and when I brought my laptop in they ran the Battery test and said if I bought the battery right then they'd give me a discount (around $100). Anyone out there used one of these "OEM Compatible" batteries? Fit/finish good? (I don't want a funky color or a corner that sticks out.) Or, should I just suck it up and get the genuine replacement (for about twice the price)?

  Read the article

• Can I change the file system on the OS partition on Server 2008 R2?

  - by KCotreau

  I have a client using R1Soft Continuous Data Protection backup, and two of the Server 2008 R2 boxes were erroring out with these errors: Unable to obtain NTFS volume data for device '\\?\Volume{f612849e-7125-11e0-8772-806e6f6e6963}': Incorrect function. Unable to discover information for filesytem volume '\\?\Volume{f612849e-7125-11e0-8772-806e6f6e6963}'; Unable to obtain NTFS volume So I backed up all the registry entries with this, {f612849e-7125-11e0-8772-806e6f6e6963}, in it, and deleted them based on some VERY sparse info from R1Soft. I then decided to restore them before I rebooted, and do a system state backup first using MS backup, and even it errored out saying that there were FAT32 partitions. This was a major clue as the only two computers with problems had these FAT32 partitions. I figured if MS backup can't backup something, any other program is likely to have problems. Also, now that I realized the servers had FAT32 partitions on them, the error referencing NTFS takes on more weight. The partitions on both servers have the label "OS", but on one of the computers, it is given a letter, but on the other not. So I am thinking if I just convert the file systems from FAT32 to NTFS, it may solve the backup problem. So the question is this: Can I just convert those partitions, and does anyone have any concrete knowledge of any major downsides, like the servers not coming back up (of course, I would do one at a time)? My thinking is that the answer is probably at least 95% no, but they are production servers, so I wanted to get some second opinions.

  Read the article

• SQL 2008 SP2 RsClientPrint ActiveX - "Unable to load client print control"

  - by Miles

  We recently updated our SQL 2008 server to use SP 2 and its causing a few headaches. We use SSRS on this server and when a client tries to print a report by the built-in print function, we're needing to download the RsClientPrint ActiveX control from the server from the client gets the following error Unable to load client print control. We have about 700 computers that are needing this fixed and I've followed the instructions found on the following URL: http://www.kodyaz.com/articles/client-side-printing-silent-deployment-of-rsclientPrint.aspx We have two issues: Most of the users who will be using this ActiveX control are not local administrators so they will not be able to install the control themselves Since there are so many computers, this has to be done silently behind the scenes run by a local admin account After following the information from the link above, we're able to put the files in the C:\Windows\System32 folder and register the DLL but we still get the same problem. The only small thing I've noticed is that in the HTML for the report page, everything that references a version is referencing version 2007.100.4000.00 and the version of the DLL that I pulled from the report server is 2007.100.1600.22. Also, for some clients that are local administrators, they are prompted every time to install the ActiveX control when they click print. This works successfully but we can't have the user asked if they want to install the same control every time they need to print.

  Read the article

• Ubuntu Server running VNC

  - by xwapilot

  I have access to four computers: 1 Ubuntu Server desktop (Version 10.04) 1 Mac Mini (Snow Leopard) 1 Windows desktop (Windows 7) 1 Windows laptop (Windows Vista) The first three will always be on the home network. My goal is to SSH from the laptop into the server and be able, through VNC (or another remote desktop software), to control the windows and mac computers. The goal of this would be a slightly heightened network security over using VNC to directly access the mac or windows desktop. I have successfully used SSH to connect to the server, but have not been able to successfully implement the remote desktop connection. I would appreciate help doing so. Here's what I've done so far: As per instructions here: http://www.stuartellis.eu/articles/vnc-on-linux/ I installed the following: vnc4server – the main VNC server software vnc-java – enables access from Web browsers with Java support xvnc4viewer – a basic VNC viewer I then set up a password using the vncpasswd command. To attempt to connect to the mac, I followed directions I found in a thread at superuser. com and went to "System PreferencesSharing" and enabled "Screen Sharing". Subsequently, I tried entering the following commands into Ubuntu: vncviewer mac_ip_address::5904 vncviewer mac_ip_address:0 vncviewer mac_ip_address:1 They all returned the following: VNC Viewer Free Edition 4.1.1 for X - built Apr 9 2010 18:41:55 Copyright (C) 2002-2005 RealVNC Ltd. See http ://www .realvnc. com for information on VNC. vncviewer: unable to open display "" I'm sure I'm missing something important, but I'm not sure what it is. Do I need to have a GUI installed, or did that come with the vnc packages I installed?

  Read the article

• Why did MAC-Adress Cloning Fix My Router?

  - by FranticPedantic

  I have a Belkin router, and about a year ago, I suddenly lost my internet connectivity from Comcast. The internet worked fine when I plugged it right into my laptop, so I just ignored it. When I moved to another apartmnet I eventually took the dive and called tech support. The tech told me to clone my MAC address which completely fixed the issue. Now I know what a MAC address is and I've read what MAC cloning is. What has bothered me since is that I don't see how this fixed the issue. As I have understood MAC address cloning, it has the router pretend it has the same MAC address as my computer. Here is why I don't understand why this fixes my issue: I have used several different computers with this router. Cloning the MAC address fixed it for ALL of my computers. The laptop I first used with my ISP was not the one that I eventually had connected when I cloned the address. Furthermore, I didn't have any problems for quite some time after I stopped using the first computer. It wasn't like the internet suddenly stopped working when I changed which laptop I was using Now it occurred to me that maybe there was some sort of expiration? Except... Which MAC address did it clone? It was just an option in the router administration page. Did it just pick whichever computer was connected to it? If my ISP still wanted the MAC of my first computer, how did some other computer's fix it? As mentioned earlier, why did this problem seemingly stem from nowhere? Anyway, I don't have any current problems so this is more just out of general curiosity. If anybody can explain it, it would be appreciated!

  Read the article

• Wifi Drops Connections with WPA2-PSK

  - by graf_ignotiev

  I run a small computer lab made up of 10 computers of identical hardware and software (Dell Latitudes with Windows 7 x64 Enterprise) and I use a ZyWALL 2WG as a router/firewall. Nine of the computers connect to the router over wifi using WPA2-PSK encryption while the last one is connected by ethernet cable. I'm having a problem where any computer connected to the wi-fi occasionally drops off the network (it cannot be pinged and the client cannot ping the gateway). It only happens on the wifi side and only when the encryption is WPA2-PSK or WPA-PSK. I tried using another router with a different make and model and had no problems. Thinking it could be a software error, I reset the router to factory defaults and installed the newest firmware (V4.04(AQI.8) | 04/09/2010), but still have the problem. The 802.1X log gives the following error User logout because of user disassociation. with this note WPA2-PSK:00242c582ece:logout where 00242c582ece is the mac address of the device. At this point I'm out of things to try and leads to follow. It looks like this user had the same or similar problem, but none of those proposed solutions work for me.

  Read the article

• Prevent Cisco VPN from interrupting home networking

  - by jkohlhepp

  I just got a new laptop, and for the most part have left its settings alone. Today I was trying to get some sharing going between my desktop and the laptop. Both machines are connected to the same wireless network and both machines consider that network to be a Home network. Both are running Win7 Home Premium. It seems like my laptop is aware of my desktop on the network. It can ping it by IP or by computer name. When I go to Network from the laptop, I can see the desktop in the list of computers. However, my desktop cannot ping the laptop, nor can it see it within Network. My desktop has a Homegroup set up, but my laptop says "There is currently no homegroup on the network". I do have network discovery turned on for both machines. Why can my desktop not "talk" to my laptop but it works the other way around? Update: Disabling the Windows Firewall on the laptop somewhat fixes the problem. With it disabled, my desktop can ping my laptop, but still my laptop can't see the homegroup. Also, it can ping via hostname, which resolves to IPv6, but can't ping via the IPv4 address. Obviously I'd rather not leave my firewall disabled, so I need a more specific fix. Update 2: Aha! It is the Cisco VPN software I was running to connect to work computers. Once I disconnected and exited from that, the two PCs seemed to be talking normally and the homegroup was visible to the laptop. So now my question has morphed: how can I prevent Cisco VPN from interrupting my home networking?

  Read the article

• System hangs while rebooting on Debian...

  - by Usman

  Hi, I have Debian (Kernel 2.6.26-2-686) installed on two computers. On one of them it reboots quite finely but I am having following problem with rebooting Debian on my second computer. When i type reboot at the Linux prompt, following messages appear and system hangs up after saying "Restarting System": Broadcast message from root@myname (tty1) (Sun Jan 17 11:23:26 2010) The system is going down for reboot NOW! INIT: Switching to runlevel: 6 INIT: Sending processes the TERM signal Saving system clock Stopping enhanced syslog: rsyslogd. Asking all remaining processes to terminate...done. Deconfiguring network interfaces...done. Cleaning up ifupdown.... Deactivating swap...done. [ 31.789103] Restarting System. _ Normally when the sytem is busy "" sign blinks but "" at the last line above does not blink which shows, the system hanged up. I tried all keys but the screen is still frozen at the same point. The difference that I noted between my two computers is that I don't have ACPI support in the BIOS of the system which is giving me this error whereas the BIOS of my first computer do have ACPI support on which Debain do not give this restart-hanging problem. I have also disabled running the acpid script by running update-rc.d -f acpid remove but the problem still persists on the second computer. Any ideas to solve or get around this problem?

  Read the article

• Convert MSDN Windows 7 Enterprise installation to Ultimate

  - by stimms

  Related question: When reinstalling Windows 7, does the language, version, architecture (64-bit or 32-bit) or source (OEM, retail, or MSDN) matter? Unthinkingly I installed Windows 7 Enterprise on my development box at work rather than the Ultimate version. Now windows is complaining that it is unable to activate because it can't contact a KMS (Key Management Service) which my company doesn't have. Is there any way to change this install such that it believes it is Windows 7 Ultimate and will take an ultimate key? I have MSDN so the licensing is not an issue.

  Read the article

• fills password and enters program automatically

  - by mark

  I am running Windows 7. In Internet Explorer 9, when I visit a webpage and enter a password it is automatically remembered. When I leave the site and return again at another time, the password is filled in automatically. I would like to stop this behavior. I do not not think that it is an auto fill problem. I think it may be related to an addon provided by my OEM and published by Authentic called "Truesuite Website Log On". How can I confirm that Truesuite is the culprit? How can I stop passwords from being filled in automatically.

  Read the article

• Windows activation on a Virtual Machine (Physical->VM)

  - by Daisetsu

  I backed up a number of laptops to virtual machines before they are to be re-purposed, in case I need the data at some later time. While the Physical to VM processes worked fine I am encountering issues on some of the VMs. When I boot them I get an error message saying I MUST activate windows in order to login. This is expected because the hardware changed (from physical hardware to virtualized hardware). I click the OK button and expect to be prompted with ways to activate, windows sits there for quite a while then tells me that "Windows has already been activated". I click OK at that message and get take back to the beginning where I am asked to activate Windows. I have done some fairly intensive googling but haven't been able to find a real solution. EDIT: The laptops with the issues are 2 Sony Vaios, I believe that they have the OEM version of the OS originally installed by the factory.

  Read the article

• Create a Windows Image for Deployment

  - by Kiranu

  In my company we have 8 laptops that we use to deploy on the field. These machines get assigned to a user for a certain time and run Windows Vista. All the machines are the same model. After the machine is returned, it is company policy to completely format the machine and go back to a predetermined configuration. Right now, what we do is we use the recovery utility in the laptop (we are a small shop so we use the OEM Windows license that the laptops come with) and manually uninstall and change the configuration in order to bring it to our baseline config. I know that there are ways to create an image that gets copied to the hard drive with a specific configuration and with specific software installed (thats what OEMs do right?). I'm looking for a tool or a tutorial or something that explains as simply as possible how to create such an image. Thanks a lot

  Read the article

• What are the licensing differences between Windows 8 Professional x64 fqc-05955 and fqc-05956?

  - by Razvan Panda

  If I do a search for Windows 8 Professional x64 in my country, the only version I can find is having the code fqc-05955 and is labeled OEM. If I perform same search on amazon.com, the only version I can find is having the code fqc-05956 and is labeled System Builder. There's not much information about licensing of Windows 8 that I could find. According to this article when using System Builder it can be transferred from one computer to another. What are the differences in licensing between those 2? Is fqc-05955 transferable from one hardware to another like System Builder is? Can I install fqc-05955 on a computer I already own that has no prior windows licensing? I am asking this, since many stores that sell fqc-05955 say it can only be bough with a computer. Thanks for your help!

  Read the article

• Mac OS X L2TP VPN won't connect

  - by smokris

  I'm running Mac OS X Server 10.6, providing an L2TP VPN service. The VPN works just fine when connecting from all computers except one --- this one computer stays at the "Connecting..." stage for a while, then says "The L2TP-VPN server did not respond". In the console, I see this: 6/7/10 10:48:07 AM pppd[341] pppd 2.4.2 (Apple version 412.0.10) started by jdoe, uid 503 6/7/10 10:48:07 AM pppd[341] L2TP connecting to server 'foo.bar.baz.edu' (256.256.256.256)... 6/7/10 10:48:07 AM pppd[341] IPSec connection started 6/7/10 10:48:07 AM racoon[342] Connecting. 6/7/10 10:48:07 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 1). 6/7/10 10:48:08 AM racoon[342] IKE Packet: receive success. (Initiator, Main-Mode message 2). 6/7/10 10:48:08 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 3). 6/7/10 10:48:08 AM racoon[342] IKE Packet: receive success. (Initiator, Main-Mode message 4). 6/7/10 10:48:08 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 5). 6/7/10 10:48:11 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). 6/7/10 10:48:14 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). 6/7/10 10:48:17 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). ...and the "retransmit" messages continue until the error message pops up. So far I've unsuccessfully tried: rebooting deleting the VPN profile and recreating it verifying the client's internet connection (it is able to reach the VPN server) connecting through several different networks (in case a router was blocking VPN packets) disabling the Mac OS X Firewall on the client making sure that the VPN settings exactly match those of other working computers running software update (the client is on 10.6.3) Any ideas?

  Read the article

• AD server within another network - DNS issues

  - by Harry Muscle

  Here's a quick summary of the environment I support: we have a domain (domain A) that has about 20 client computers. The domain server for this domain and all the clients sit within the network infrastructure of a larger domain (domain B). All the computers get their network settings via DHCP from domain B's servers. I have no control and am unable to make changes to anything to do with domain B. The problem I have is that currently in order for my domain's (domain A) clients to be able to resolve the domain server and the shares on it they have their DNS server IP address set to domain A's domain server (via the default GPO). Unfortunately when a laptop (windows and mac) gets taken home, they are still looking for the domain server as their DNS server and obviously can't access the internet correctly outside of our environment. Ideally I need a solution where the machines use domain A's domain server as their DNS when inside the office and use what ever DNS server DHCP gives them when they are outside the office. However, since I have no control over the office DHCP server, I'm not sure how this can be accomplished. Any help and advice that anyone can offer is highly appreciated. Thanks, Harry P.S. The solution I'm trying to find needs to require no involvement from the user.

  Read the article

• Clustering/load balancing for cluster unaware applications

  - by AaronLS

  Forgive me if I use any of these terms incorrectly. I am wondering if there is any kind of software that would allow my two "join" two computers together such that a cluster unaware application could utilize their combined computing resources? By "cluster unaware" I mean an application that isn't designed to share work across multiple services. My understanding is that clustering is enabled by the specific application by it's architecture, such that messaging with multiple instances of the application coordinate the sharing of work. Instead I am looking for something that enables clustering at the OS or virtualization level, so that any application could essentially be clustered. Failing that, I am also wondering about the following scenario: We have 3 different applications we will call A, B, and C. We have 2 single core computers. At any given time lets say that any combination of those applications will be CPU intensive. In cases where only 2 of those apps are very active, have one of them moved over to a different server. In a nutshell, some sort of dynamic automatic shuffling of the application's load. I have heard of virtual machines that can be migrated across physical machines while live, but I am wondering if this can be done automatically in response to an application's or VM's CPU activity?

  Read the article

• OS/X 10.6 Bizarre login bug: Making alternative "Others..." appear. Why does this happen?

  - by bjornl

  I am studying at NUS in Singapore, and they have a mac-equipped computer lab here at school. All users (students) have our own personal accounts that we use to log in to the computers with. Sometimes when you approach a computer to log in only the alternative "thinkmac", which is the school's administrator account, I presume. Some other computers have the alternative "thinkmac" as well as "Others..." where you can input your own login credentials. One day as I sat down by a computer and there was only the "thinkmac" alternative. I was about to get up and find another one when the guy sitting next to me says - Just click 'thinkmac' - the computer will ask for your password - then hit escape to get back to the login screen. Repeat until "Others..." appear. So: If you click any user account, hit ESC to get taken back to the login screen, repeat for 5-10x, eventually the alternative "Others..." will appear. Why is this? Is there an internal counter that keeps track on how many times you have clicked a/any given user account, and after a certain threshold it displays the "Others"? What is the logical reasoning behind this?

  Read the article

• LogMeIn Hamachi for Linux

  - by tlunter

  So far most of my work using LogMeIn Hamachi has been from either a Mac OS X or Windows system to Windows or a Linux Computer. Recently I purchased a mini computer and have been running Ubuntu Server on it, as my little server. I knew LogMeIn had a Linux client that is command line only, but I often do all my work via command line anyway, so that wasn't an issue. I added my user to the correct local file so that I could run the hamachi daemon without sudo, and was able to connect to LogMeIn's service. I decided to set up my Linux server as a git server as well, and set it up correctly. The thing is, the server is behind my schools firewall and I need to use hamachi to get around that. Since most of the time I was using either Mac or Windows, I never had an issue sshing onto any of my computers since LogMeIn is fully featured for these OSs. From Linux (Arch) though, it seems like the client cannot correctly route to the LogMeIn IPs. I know from Windows I can connect to the Linux computers, both of them. From Linux (Arch) though, I can't connect to my Mac, Windows, or Linux server. It keeps just dropping the connection. I was wondering if there was some configuration that I would need to make for this to work. I understand that it is most likely going to be a static configuration since I assume it has to do with the computer not understanding that 5.*.*.* actually refers to another IP:Port. Has anyone had any experience getting this to work?

  Read the article

• What other tape manufacturers can I use in IBM LTO Gen 3 SAS Tape Drives

  - by timgws

  I have recently just got my hands on an IBM 3580S3V. I was just wondering if there are any other brands that I can use in this IBM gear? LTO media are usually manufactured only by EMTEC, Imation, Fujifilm, Maxell, TDK and Sony (according to Wikipedia). I am trying to determine who OEM's the IBM tapes, or if possible, a list of media that IBM supports. So far in my Google studies, I have only been able to see IBM as the supported media manufacturer (seeing as they sell tapes, I assume they don't want anyone buying media from competitors!)

  Read the article

• running chkdsk on a disk without a drive letter

  - by neubert

  I have a hard drive that shows up in Disk Management as having two partitions. One of the partitions says 69.71GB and that's it. The other says 4.82GB and, underneath that, Healthy (OEM Partition). I'm trying to do chkdsk on the 69.71GB partition and am unsure of how to do it without a drive letter. Any ideas? It's an NTFS partition that's gotten corrupted. Linux's ntfsfix spits out a bunch of errors so I'm thinking chkdsk might be better. Thanks

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >