Search Results

Search found 1827 results on 74 pages for 'pci compliance'.

Page 68/74 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • Windows 7 laptop constantly dropping internet connection

    - by Corbin Holbert
    I have scoured the web for an answer and failed to find one. I am using a Toshiba Satellite laptop running Windows 7 64-Bit. I have the computer connected via Wifi. Now, I am no beginner with the Internet, or anything related to computers, as I have grown up teaching everyone around me how to use computers, and went to college for IT. Everything on my network works flawlessly at all times, except for this evil laptop. The worst part is that I fixed this once before a few years back and recently had to replace the hard drive and re-install the OS, but cannot for the life of me remember what I did to make this problem go away. I am in my browser, connected to the Internet. I click a link. Suddenly no internet access. All I do is click down on the WiFi connection in the task bar, disconnect and reconnect immediately. Internet is back the moment I hit "connect." I have read many people had the same issues as I am having, but they all had triggers or other network issues. I have no trigger (this happens literally five to six times per minute no matter what I am doing) and I have no problems with my router, modem, or any other devices or computers on said network. As I am a web designer, and like to test my work live at every turn- this is going to result in this laptop being in pieces if I can't get it fixed soon. If more info is needed, let me know and I will provide. Thanks for any help offered! EDIT: Network Card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC Network state reads as "No Internet Access" when the problem first occurs, then magically I have Internet access for about ten seconds once I disconnect and reconnect. I have turned off IPV6, I have turned off power saving options for the network adapter, no viruses. Any new ideas? Also, I had to disconnect and reconnect four times just to get to this edit screen- and will likely have to do the same just to post it- it's that bad.

    Read the article

  • Some apps very slow to load on Windows 7, copy & paste very slow.

    - by Mike
    Hello, I searched here and couldn't find a similar issue to mine but apologies if I missed it. I've searched the web and no one else seems to be having the same issue either. I'm running Windows 7 Ultimate 64bit on a pretty high spec. machine (well, apart from the graphics): Asus M4A79T Deluxe AMD Phenom II 965 black edition (quad core, 3.4GHz) 8GB Crucial Ballistix DDR 1333MHz RAM 80GB Intex X25 SSD for OS 500GB mechanical drive for data. ATi Radeon HD 4600 series PCI-e Be Quiet! 850W PSU I think those are all the relevant stats, if you need anything else let me know. I've updated chipset, graphics and various other drivers all to no avail, the problem remains. I have also unplugged and replugged every connection internally and cleaned the RAM edge connectors. The problems: Video LAN (VLC) and CDBurnerXP both take ages to load, I'm talking 30 seconds and 1 minute respectively which is really not right. Copy and paste from Open Office spread sheet into Fire Fox, for example, is really, really slow, I'll have pressed control V 5 or 6 times before it actually happens, if I copy and then wait 5 to 10 seconds or so it'll paste first time so it's definitely some sort of time lag. Command and Conquer - Generals: Zero Hour. When playing it'll run perfectly for about 10 or 20 seconds then it'll just pause for 3 or 4 then run for another 10 or 20 seconds and pause again and so on. I had the Task Manager open on my 2nd monitor whilst playing once and I noticed it was using about 25% of the CPU, pretty stable but when the pause came another task didn't shoot up to 100% like others on the web have been reporting (similar but not the same as my issue, often svchost.exe for them) but dropped to 2 or 3% usage then back up to 25% when it started playing properly again. Very odd! But it gets even odder... I had a BSOD and reboot last week, when it rebooted the problem had completely gone, I could play C&C to my heart's content and both the other apps loaded instantly, copy and paste worked instantly too. I did an AVG update earlier this week which required a reboot, rebooted and the problem's back. I don't think it's AVG related though, I think it was just coincidence that's the app that required a reboot. I think any reboot would have brought the issue back. A number of reboots later and it hasn't gone away again. If any one could make any suggestions as to the likely cause and solution to these issues I'd be most grateful, it's driving me nuts! Thanks, Mike....

    Read the article

  • SSD Fresh Does Not Start

    - by Jim Fell
    I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fress from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

    Read the article

  • Crashes and freezes after fixing "BOOTMGR is missing" error

    - by Greg-J
    I came back from a 3-day weekend to a computer that was off. I leave my PC on 24/7, so this was odd. Turn it on to get the dreaded "BOOTMGR is missing" screen. Two attempts at Windows Recovery and it booted into Windows fine. After an hour or so, I get a frozen Chrome and my start bar disappears. Ctrl+Alt+Del brings up an error box telling me that Ctrl+Alt+Del failed to work properly. Clicking on any open application triggers an error (I can't recall the error now, but it essentially just said that the application couldn't be found running or something along those lines). I restart, and again, the same thing happens after a while of use. I turn it on, install the 47 updates I have or so, and then restart it. After a while of use (under an hour), it just freezes completely. My thoughts are: SSDs, RAM or PS. My system specs below: (RAID0) 2 x Crucial M4 CT128M4SSD2 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML16GX3M4A1600C9 CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active 1 x ASUS Maximus IV Gene-Z/GEN3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard 1 x Hitachi GST Deskstar 7K1000.C 0F10383 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive 1 x Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 1 x SAPPHIRE 21197-00-40G Radeon HD 7970 3GB 384-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card 1 x Noctua NH-D14 120mm & 140mm SSO CPU Cooler This is all crammed in a pretty small case (NZXT Vulcan) and has been running perfectly problem-free since January. The only thing out of the ordinary is that there is a fan in the case that is now making noise whereas the case has previously been completely silent. I have no reason to believe this is anything more then correlation, but felt it is worth mentioning. I believe it MAY be the SSDs simply because of the BOOTMGR error, but not sure how to test that theory. My belief that it may be the RAM is simply from experience with frozen machines. I haven't had the time to memtest it, but will. The PS being the culprit is something I've picked up by reading similar threads on various forums, and it seems plausible. I am unsure how to test this though. ANY insight whatsover would be greatly appreciated!

    Read the article

  • Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

    - by Pro Backup
    In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

    Read the article

  • Troubleshooting an NFS server hanging after authenticated mount request

    - by Christoph
    I need some advice on troubleshooting an NFS server problem on Scientific Linux (RHEL) 6.1. The log on the server shows that an authenticated mount request was made: Jan 13 16:30:02 ??? rpc.mountd[3996]: authenticated mount request from ????:784 for /shared-storage/cm/shared (/shared-storage/cm/shared) But after that, it does not continue. On the client, it is also hanging. The interesting thing now is that I have two NFS servers, which should be identical, and the one is working perfectly, but the other exhibits the above mentioned behaviour. The problem is also not completely persistent, i. e. sometimes the mount request succeeds. I assume that the problem must be related to the server rather than to the client, because it is working perfectly on the other server. My question is where I should search the problem. I have already re-created the exports using exportfs -r, I have restarted the NFS server, I have compared the rpcinfo outputs of both server - no success. The problem even survives a reboot. Any other ideas are appreciated. As answer to Tim's question: I have sporadically the following in dmesg, but do not know whether it is related e1000e 0000:0c:00.0: eth4: Detected Hardware Unit Hang: TDH <24> TDT <25> next_to_use <25> next_to_clean <24> buffer_info[next_to_clean]: time_stamp <1c3d12940> next_to_watch <24> jiffies <1c3d12940> next_to_watch.status <0> MAC Status <80383> PHY Status <792d> PHY 1000BASE-T Status <7800> PHY Extended Status <3000> PCI Status <10> Further edit: The problem above does not occur on the machine that is working, so it probably is related. Again an edit: The error is not on the (software) device that is used for NFS, but on another one. The NFS mount also does not trigger the message.

    Read the article

  • lshw tells me my processor is a 64 bits but my motherboard has a 32 bits width

    - by bpetit
    Recently I noticed lshw tells me a strange thing. Here is the first part of my lshw output: bpetit-1025c description: Notebook product: 1025C (1025C) vendor: ASUSTeK COMPUTER INC. version: x.x serial: C3OAAS000774 width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=Eee PC... *-core description: Motherboard product: 1025C vendor: ASUSTeK COMPUTER INC. physical id: 0 version: x.xx serial: EeePC-0123456789 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1025C.0701 date: 01/06/2012 size: 64KiB capacity: 1984KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd... *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 798MHz capacity: 1865MHz width: 64 bits clock: 533MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc ... configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 1066 MHz (0.9 ns) product: SSZ3128M8-EAEEF vendor: Xicor physical id: 1 serial: 00000004 slot: DIMM1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 798MHz capacity: 798MHz capabilities: ht cpufreq configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical So here I see my processor is effectively a 64 bits one. However, I'm wondering how my motherboard can have a "32 bits width". I've browsed the web to find an answer, without success. I imagine it's just a technical fact that I don't know about. Thanks.

    Read the article

  • Windows doesn't get access to internet though linux easily does

    - by flashnik
    We have a very interesting problem. The network is configured in this way: internet is connected to Trendnet switch TS DHCP server at 192.168.0.1 running on Ubuntu (S) is connected to internet switch DNS is also configured on 192.168.0.1 on S D-Link Wi-Fi boosters are connected to switch TS PCs use D-Link PCI-E Wi-Fi cards to get access to network PCs have both Ubuntu and Windows 7 There are about 40 PCs. When PC is booted to Ubuntu it easily gets access to internet. But when it's booted to Windows 7, it gets a valid IP-address, but doesn't get access to internet. The address, mask, DNS, GW-address are totally the same as when it's booted under Ubuntu. The S is reacheble and pingable. Sometimes when we are lucky the PC gets access to Internet, but after rebooting it can lose it. When PC under Windows has access, it has totally the same settings as when it doesn't. What can be done? UPDATE I shared a dropbox with 2 captures of traffic. Ping.pcap is a capture of pinging 8.8.8.8. And google-browser.pcap is a capture of opening a google.com in a browser, both of them are in tcpdump formats and made by Wireshark on Win PC. The MAC of Win PC ends on b7:63 and IP is 192.168.0.130. UPDATE2 This is ifconfig output from Ubuntu Server eth0 Link encap:Ethernet HWaddr 00:1e:67:13:d5:8d inet addr:193.200.211.74 Bcast:193.200.211.78 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe13:d58d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:196284 errors:0 dropped:44 overruns:0 frame:0 TX packets:190682 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:158032255 (158.0 MB) TX bytes:156441225 (156.4 MB) Interrupt:19 Memory:c1400000-c1420000 eth0:2 Link encap:Ethernet HWaddr 00:1e:67:13:d5:8d inet addr:192.168.0.1 Bcast:192.168.0.254 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Memory:c1400000-c1420000 eth1 Link encap:Ethernet HWaddr 00:1e:67:13:d5:8c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:c1300000-c1320000 nslookup from Win results in DNS request timeout, nbtstat in 'not found'.

    Read the article

  • Weird nfs performance: 1 thread better than 8, 8 better than 2!

    - by Joe
    I'm trying to determine the cause of poor nfs performance between two Xen Virtual Machines (client & server) running on the same host. Specifically, the speed at which I can sequentially read a 1GB file on the client is much lower than what would be expected based on the measured network connection speed between the two VMs and the measured speed of reading the file directly on the server. The VMs are running Ubuntu 9.04 and the server is using the nfs-kernel-server package. According to various NFS tuning resources, changing the number of nfsd threads (in my case kernel threads) can affect performance. Usually this advice is framed in terms of increasing the number from the default of 8 on heavily-used servers. What I find in my current configuration: RPCNFSDCOUNT=8: (default): 13.5-30 seconds to cat a 1GB file on the client so 35-80MB/sec RPCNFSDCOUNT=16: 18s to cat the file 60MB/s RPCNFSDCOUNT=1: 8-9 seconds to cat the file (!!?!) 125MB/s RPCNFSDCOUNT=2: 87s to cat the file 12MB/s I should mention that the file I'm exporting is on a RevoDrive SSD mounted on the server using Xen's PCI-passthrough; on the server I can cat the file in under seconds ( 250MB/s). I am dropping caches on the client before each test. I don't really want to leave the server configured with just one thread as I'm guessing that won't work so well when there are multiple clients, but I might be misunderstanding how that works. I have repeated the tests a few times (changing the server config in between) and the results are fairly consistent. So my question is: why is the best performance with 1 thread? A few other things I have tried changing, to little or no effect: increasing the values of /proc/sys/net/ipv4/ipfrag_low_thresh and /proc/sys/net/ipv4/ipfrag_high_thresh to 512K, 1M from the default 192K,256K increasing the value of /proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_max to 1M from the default of 128K mounting with client options rsize=32768, wsize=32768 From the output of sar -d I understand that the actual read sizes going to the underlying device are rather small (<100 bytes) but this doesn't cause a problem when reading the file locally on the client. The RevoDrive actually exposes two "SATA" devices /dev/sda and /dev/sdb, then dmraid picks up a fakeRAID-0 striped across them which I have mounted to /mnt/ssd and then bind-mounted to /export/ssd. I've done local tests on my file using both locations and see the good performance mentioned above. If answers/comments ask for more details I will add them.

    Read the article

  • What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

    - by Tyler
    Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

    Read the article

  • Network unreachable on Ubuntu guest after trying to set up a host only network on Virtualbox

    - by gkb0986
    I have a Mac OS X host and a bunch of guests including Ubuntu and Arch Linux. I was trying to set up a host-only network at eth1 to let me ssh into the system. But now eth0 isn't working properly either. Ubuntu can no longer connect to remote hosts or browse the internet. It tells me that the network is unreachable. What's gone wrong here? I've included some diagnostics below. $ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10968 errors:0 dropped:0 overruns:0 frame:0 TX packets:10968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:897264 (897.2 KB) TX bytes:897264 (897.2 KB) Other diagnostic commands and the output: $sudo lspci -n 00:00.0 0600: 8086:1237 (rev 02) 00:01.0 0601: 8086:7000 00:01.1 0101: 8086:7111 (rev 01) 00:02.0 0300: 80ee:beef 00:03.0 0200: 8086:100e (rev 02) 00:04.0 0880: 80ee:cafe 00:05.0 0401: 8086:2415 (rev 01) 00:06.0 0C03: 106B:003F 00:07.0 0680: 8086:7113 (REV 08) 00:0D.0 0106: 8086:2829 (REV 02) $sudo lshw -c network *-network DISABLED description: Ethernet interface product: 82540EM Gigabit Ethernet Controller vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 logical name: eth0 version: 02 serial: 08:00:27:7d:22:df size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full firmware=N/A latency=64 link=no mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s resources: irq:19 memory:f0000000-f001ffff ioport:d010(size=8) $lsmod Module Size Used by nls_utf8 12557 1 isofs 40257 1 vboxsf 43743 2 vesafb 13844 1 snd_intel8x0 38570 2 snd_ac97_codec 134869 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97275 2 snd_intel8x0,snd_ac97_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi rfcomm 47604 0 snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event bnep 18281 2 bluetooth 180113 10 rfcomm,bnep ppdev 17113 0 psmouse 97519 0 snd_timer 29990 2 snd_pcm,snd_seq joydev 17693 0 snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq vboxvideo 12622 1 serio_raw 13211 0 snd 79041 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd vboxguest 235498 7 vboxsf parport_pc 32866 0 drm 241971 2 vboxvideo i2c_piix4 13301 0 snd_page_alloc 18529 2 snd_intel8x0,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usbhid 47238 0 hid 99636 1 usbhid e1000 108589 0

    Read the article

  • Download a file with DefaultHTTPClient and preemptive authentication

    - by Nils
    After I had a lot of problems with preemptive authentication , I got it finally working. Now the next problem. I want to get a file with it, but I don't know how. I thought the file data might be in the variable response, but it isn't. Any ideas how this might work? I'm trying it since days without success :( - Basically I'm trying to download an jpeg file, which is on a server protected by prem. auth. // BASIC AUTH /* * ==================================================================== * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. * The ASF licenses this file to You under the Apache License, Version 2.0 * (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ==================================================================== * * This software consists of voluntary contributions made by many * individuals on behalf of the Apache Software Foundation. For more * information on the Apache Software Foundation, please see * <http://www.apache.org/>. */ //http://svn.apache.org/repos/asf/httpcomponents/httpclient/branches/4.0.x/httpclient/src/examples/org/apache/http/examples/client/ClientPreemptiveBasicAuthentication.java httpclient = new DefaultHttpClient(); httpclient.getCredentialsProvider().setCredentials( new AuthScope(host, port), new UsernamePasswordCredentials(username, password)); // Generate BASIC scheme object and stick it to the local // execution context BasicHttpContext localcontext = new BasicHttpContext(); BasicScheme basicAuth = new BasicScheme(); localcontext.setAttribute("preemptive-auth", basicAuth); //first request interceptor httpclient.addRequestInterceptor(new PreemptiveAuth(), 0); HttpHost targetHost = new HttpHost(host, port, "http"); //HttpGet httpget = new HttpGet("/"); HttpGet httpget = new HttpGet(http.url); System.out.println("executing request" + httpget.getRequestLine()); /// !!! HttpResponse response = httpclient.execute(targetHost, httpget, localcontext); HttpEntity entity = response.getEntity(); System.out.println("----------------------------------------"); System.out.println("+"+response.getStatusLine()+"+"); ...

    Read the article

  • Which version of MSXML should I use?

    - by Cheeso
    Seems like this would be a common question, though I could not find it on SO. Which version of MSXML should I use in my applications, and more importantly, how should I decide? There is MSXML3, 4, 5 and 6. I recently posted some code in calling-wcf-service-by-vbscript that used MSXML v4. AnthonyWJones posted that I shouldn't use 4, but instead 3 or 6, but probably 3. Certainly not v5! Why? I'd like to know more about the criteria for selecting the version of MSXML to use in my apps. Bonus question: Does anyone have a summary of the differences between the various versions of MSXML over time? Summary so far: MSXML6 Should be first choice. was released in 2006, and includes perf and compliance fixes. Use this if you can. It's good. There are no merge modules; to bundle the MSXML6 runtime with your app, MS suggests packaging the MSXML6 msi file. MSXML6 is an upgrade from MSXML3/4 but does not replace them, because it discontinues some features. You can get the MSI here. MSXML3 Second choice. Most widely deployed version. Originally shipped in March 2000. Actively maintained, no new features. Currently supported, if you are on SP5 (shipped in 2005) or later. SP7 is current (also from 2005). MSXML5 was released only as part of MS-Office. Currently supported by Microsoft, but only as part of Office, not for building apps. Don't build apps that depend on MSXML5: Verboten. MSXML4 originally shipped? Currently in "maintenance mode". Microsoft is encouraging people to move off MSXML4 to MSXML6. Currently supported if you are on MSXML4SP2 or later, which shipped in 2003. download MSXML4SP2 here. Can be redisributed. Using the right version of MSXML in Internet Explorer is a good entry on the blog from Microsoft's xmlteam.

    Read the article

  • NoSQL DB for .Net document-based database (ECM)

    - by Dane
    I'm halfway through coding a basic multi-tenant SaaS ECM solution. Each client has it's own instance of the database / datastore, but the .Net app is single instance. The documents are pretty much read only (i.e. an image archive of tiffs or PDFs) I've used MSSQL so far, but then started thinking this might be viable in a NoSQL DB (e.g. MongoDB, CouchDB). The basic premise is that it stores documents, each with their own particular indexes. Each tenant can have multiple document types. e.g. One tenant might have an invoice type, which has Customer ID, Invoice Number and Invoice Date. Another tenant might have an application form, which has Member Number, Application Number, Member Name, and Application Date. So far I've used the old method which Sharepoint (used?) to use, and created a document table which has int_field_1, int_field_2, date_field_1, date_field_2, etc. Then, I've got a "mapping" table which stores the customer specific index name, and the database field that will map to. I've avoided the key-value pair model in the DB due to volume of documents. This way, we can support multiple document types in the one table, and get reasonably high performance out of it, and allow for custom document type searches (i.e. user selects a document type, then they're presented with a list of search fields). However, a NoSQL DB might make this a lot simpler, as I don't need to worry about denormalizing the document. However, I've just got concerns about the rest of the data around a document. We store an "action history" against the document. This tracks views, whether someone emails the document from within the system, and other "future" functionality (e.g. faxing). We have control over the document load process, so we can manipulate the data however it needs to be to get it in the document store (e.g. assign unique IDs). Users will not be adding in their own documents, so we shouldn't need to worry about ACID compliance, as the documents are relatively static. So, my questions I guess : Is a NoSQL DB a good fit Is MongoDB the best for Asp.Net (I saw Raven and Velocity, but they're still kinda beta) Can I store a key for each document, and then store the action history in a MSSQL DB with this key? I don't need to do joins, it would be if a person clicks "View History" against a document. How would performance compare between the two (NoSQL DB vs denormalized "document" table) Volumes would be up to 200,000 new documents per month for a single tenant. My current scaling plan with the SQL DB involves moving the SQL DB into a cluster when certain thresholds are reached, and then reviewing partitioning and indexing structures.

    Read the article

  • Best Practices / Patterns for Enterprise Protection/Remediation of SSNs (Social Security Numbers)

    - by Erik Neu
    I am interested in hearing about enterprise solutions for SSN handling. (I looked pretty hard for any pre-existing post on SO, including reviewing the terriffic SO automated "Related Questions" list, and did not find anything, so hopefully this is not a repeat.) First, I think it is important to enumerate the reasons systems/databases use SSNs: (note—these are reasons for de facto current state—I understand that many of them are not good reasons) Required for Interaction with External Entities. This is the most valid case—where external entities your system interfaces with require an SSN. This would typically be government, tax and financial. SSN is used to ensure system-wide uniqueness. SSN has become the default foreign key used internally within the enterprise, to perform cross-system joins. SSN is used for user authentication (e.g., log-on) The enterprise solution that seems optimum to me is to create a single SSN repository that is accessed by all applications needing to look up SSN info. This repository substitutes a globally unique, random 9-digit number (ASN) for the true SSN. I see many benefits to this approach. First of all, it is obviously highly backwards-compatible—all your systems "just" have to go through a major, synchronized, one-time data-cleansing exercise, where they replace the real SSN with the alternate ASN. Also, it is centralized, so it minimizes the scope for inspection and compliance. (Obviously, as a negative, it also creates a single point of failure.) This approach would solve issues 2 and 3, without ever requiring lookups to get the real SSN. For issue #1, authorized systems could provide an ASN, and be returned the real SSN. This would of course be done over secure connections, and the requesting systems would never persist the full SSN. Also, if the requesting system only needs the last 4 digits of the SSN, then that is all that would ever be passed. Issue #4 could be handled the same way as issue #1, though obviously the best thing would be to move away from having users supply an SSN for log-on. There are a couple of papers on this: UC Berkely: http://bit.ly/bdZPjQ Oracle Vault: bit.ly/cikbi1

    Read the article

  • JPA Entity Manager resource handling

    - by chiragshahkapadia
    Every time I call JPA method its creating entity and binding query. My persistence properties are: <property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect"/> <property name="hibernate.cache.provider_class" value="net.sf.ehcache.hibernate.SingletonEhCacheProvider"/> <property name="hibernate.cache.use_second_level_cache" value="true"/> <property name="hibernate.cache.use_query_cache" value="true"/> And I am creating entity manager the way shown below: emf = Persistence.createEntityManagerFactory("pu"); em = emf.createEntityManager(); em = Persistence.createEntityManagerFactory("pu").createEntityManager(); Is there any nice way to manage entity manager resource instead create new every time or any property can set in persistence. Remember it's JPA. See below binding log every time : 15:35:15,527 INFO [AnnotationBinder] Binding entity from annotated class: * 15:35:15,527 INFO [QueryBinder] Binding Named query: * = * 15:35:15,527 INFO [QueryBinder] Binding Named query: * = * 15:35:15,527 INFO [QueryBinder] Binding Named query: 15:35:15,527 INFO [QueryBinder] Binding Named query: 15:35:15,527 INFO [QueryBinder] Binding Named query: 15:35:15,527 INFO [QueryBinder] Binding Named query: 15:35:15,527 INFO [QueryBinder] Binding Named query: 15:35:15,527 INFO [QueryBinder] Binding Named query: 15:35:15,527 INFO [QueryBinder] Binding Named query: 15:35:15,527 INFO [EntityBinder] Bind entity com.* on table * 15:35:15,542 INFO [HibernateSearchEventListenerRegister] Unable to find org.hibernate.search.event.FullTextIndexEventListener on the classpath. Hibernate Search is not enabled. 15:35:15,542 INFO [NamingHelper] JNDI InitialContext properties:{} 15:35:15,542 INFO [DatasourceConnectionProvider] Using datasource: 15:35:15,542 INFO [SettingsFactory] RDBMS: and Real Application Testing options 15:35:15,542 INFO [SettingsFactory] JDBC driver: Oracle JDBC driver, version: 9.2.0.1.0 15:35:15,542 INFO [Dialect] Using dialect: org.hibernate.dialect.Oracle10gDialect 15:35:15,542 INFO [TransactionFactoryFactory] Transaction strategy: org.hibernate.transaction.JDBCTransactionFactory 15:35:15,542 INFO [TransactionManagerLookupFactory] No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recomm ended) 15:35:15,542 INFO [SettingsFactory] Automatic flush during beforeCompletion(): disabled 15:35:15,542 INFO [SettingsFactory] Automatic session close at end of transaction: disabled 15:35:15,542 INFO [SettingsFactory] JDBC batch size: 15 15:35:15,542 INFO [SettingsFactory] JDBC batch updates for versioned data: disabled 15:35:15,542 INFO [SettingsFactory] Scrollable result sets: enabled 15:35:15,542 INFO [SettingsFactory] JDBC3 getGeneratedKeys(): disabled 15:35:15,542 INFO [SettingsFactory] Connection release mode: auto 15:35:15,542 INFO [SettingsFactory] Default batch fetch size: 1 15:35:15,542 INFO [SettingsFactory] Generate SQL with comments: disabled 15:35:15,542 INFO [SettingsFactory] Order SQL updates by primary key: disabled 15:35:15,542 INFO [SettingsFactory] Order SQL inserts for batching: disabled 15:35:15,542 INFO [SettingsFactory] Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory 15:35:15,542 INFO [ASTQueryTranslatorFactory] Using ASTQueryTranslatorFactory 15:35:15,542 INFO [SettingsFactory] Query language substitutions: {} 15:35:15,542 INFO [SettingsFactory] JPA-QL strict compliance: enabled 15:35:15,542 INFO [SettingsFactory] Second-level cache: enabled 15:35:15,542 INFO [SettingsFactory] Query cache: enabled 15:35:15,542 INFO [SettingsFactory] Cache region factory : org.hibernate.cache.impl.bridge.RegionFactoryCacheProviderBridge 15:35:15,542 INFO [RegionFactoryCacheProviderBridge] Cache provider: net.sf.ehcache.hibernate.SingletonEhCacheProvider 15:35:15,542 INFO [SettingsFactory] Optimize cache for minimal puts: disabled 15:35:15,542 INFO [SettingsFactory] Structured second-level cache entries: disabled 15:35:15,542 INFO [SettingsFactory] Query cache factory: org.hibernate.cache.StandardQueryCacheFactory 15:35:15,542 INFO [SettingsFactory] Statistics: disabled 15:35:15,542 INFO [SettingsFactory] Deleted entity synthetic identifier rollback: disabled 15:35:15,542 INFO [SettingsFactory] Default entity-mode: pojo 15:35:15,542 INFO [SettingsFactory] Named query checking : enabled 15:35:15,542 INFO [SessionFactoryImpl] building session factory 15:35:15,542 INFO [SessionFactoryObjectFactory] Not binding factory to JNDI, no JNDI name configured 15:35:15,542 INFO [UpdateTimestampsCache] starting update timestamps cache at region: org.hibernate.cache.UpdateTimestampsCache 15:35:15,542 INFO [StandardQueryCache] starting query cache at region: org.hibernate.cache.StandardQueryCache

    Read the article

  • What is a good platform for building a game framework targetting both web and native languages?

    - by fuzzyTew
    I would like to develop (or find, if one is already in development) a framework with support for accelerated graphics and sound built on a system flexible enough to compile to the following: native ppc/x86/x86_64/arm binaries or a language which compiles to them javascript actionscript bytecode or a language which compiles to it (actionscript 3, haxe) optionally java I imagine, for example, creating an API where I can open windows and make OpenGL-like calls and the framework maps this in a relatively efficient manner to either WebGL with a canvas object, 3d graphics in Flash, OpenGL ES 2 with EGL, or desktop OpenGL in an X11, Windows, or Cocoa window. I have so far looked into these avenues: Building the game library in haXe Pros: Targets exist for php, javascript, actionscript bytecode, c++ High level, object oriented language Cons: No support for finally{} blocks or destructors, making resource cleanup difficult C++ target does not allow room for producing highly optimized libraries -- the foreign function interface requires all primitive types be boxed in a wrapper object, as if writing bindings for a scripting language; these feel unideal for real-time graphics and audio, especially exporting low-level functions. Doesn't seem quite yet mature Using the C preprocessor to create a translator, writing programs entirely with macros Pros: CPP is widespread and simple to use Cons: This is an arduous task and probably the wrong tool for the job CPP implementations differ widely in support for features (e.g. xcode cpp has no variadic macros despite claiming C99 compliance) There is little-to-no room for optimization in this route Using llvm's support for multiple backends to target c/c++ to web languages Pros: Can code in c/c++ LLVM is a very mature highly optimizing compiler performing e.g. global inlining Targets exist for actionscript (alchemy) and javascript (emscripten) Cons: Actionscript target is closed source, unmaintained, and buggy. Javascript targets do not use features of HTML5 for appropriate optimization (e.g. linear memory with typed arrays) and are immature An LLVM target must convert from low-level bytecode, so high-level constructs are lost and bloated unreadable code is created from translating individual instructions, which may be more difficult for an unprepared JIT to optimize. "jump" instructions cause problems for languages with no "goto" statements. Using libclang to write a translator from C/C++ to web languages Pros: A beautiful parsing library providing easy access to the code structure Can code in C/C++ Has sponsored developer effort from Apple Cons: Incomplete; current feature set targets IDEs. Basic operators are unexposed and must be manually parsed from the returned AST element to be identified. Translating code prior to compilation may forgo optimizations assumed in c/c++ such as inlining. Creating new code generators for clang to translate into web languages Pros: Can code in C/C++ as libclang Cons: There is no API; code structure is unstable A much larger job than using libclang; the innards of clang are complex Building the game library in Common Lisp Pros: Flexible, ancient, well-developed language Extensive introspection should ease writing translators Translators exist for at least javascript Cons: Unfamiliar language No standardized library functions, widely varying implementations Which of these avenues should I pursue? Do you know of any others, or any systems that might be useful? Does a general project like this exist somewhere already? Thank you for any input.

    Read the article

  • PHP 'instanceof' failing with class constant

    - by Nathan Loding
    I'm working on a framework that I'm trying to type as strongly as I possibly can. (I'm working within PHP and taking some of the ideas that I like from C# and trying to utilize them within this framework.) I'm creating a Collection class that is a collection of domain entities/objects. It's kinda modeled after the List<T> object in .Net. I've run into an obstacle that is preventing me from typing this class. If I have a UserCollection, it should only allow User objects into it. If I have a PostCollection, it should only allow Post objects. All Collections in this framework need to have certain basic functions, such as add, remove, iterate. I created an interface, but found that I couldn't do the following: interface ICollection { public function add($obj) } class PostCollection implements ICollection { public function add(Post $obj) {} } This broke it's compliance with the interface. But I can't have the interface strongly typed because then all Collections are of the same type. So I attempted the following: interface ICollection { public function add($obj) } abstract class Collection implements ICollection { const type = 'null'; } class PostCollection { const type = 'Post'; public function add($obj) { if(!($obj instanceof self::type)) { throw new UhOhException(); } } } When I attempt to run this code, I get syntax error, unexpected T_STRING, expecting T_VARIABLE or '$' on the instanceof statement. A little research into the issue and it looks like the root of the cause is that $obj instanceof self is valid to test against the class. It appears that PHP doesn't process the entire self::type constant statement in the expression. Adding parentheses around the self::type variable threw an error regarding an unexpected '('. An obvious workaround is to not make the type variable a constant. The expression $obj instanceof $this->type works just fine (if $type is declared as a variable, of course). I'm hoping that there's a way to avoid that, as I'd like to define the value as a constant to avoid any possible change in the variable later. Any thoughts on how I can achieve this, or have I take PHP to it's limit in this regard? Is there a way of "escaping" or encapsulating self::this so that PHP won't die when processing it?

    Read the article

  • SQL not yielding expected results

    - by AnonJr
    I have three tables related to this particular query: Lawson_Employees: LawsonID (pk), LastName, FirstName, AccCode (numeric) Lawson_DeptInfo: AccCode (pk), AccCode2 (don't ask, HR set up), DisplayName tblExpirationDates: EmpID (pk), ACLS (date), EP (date), CPR (date), CPR_Imported (date), PALS (date), Note The goal is to get the data I need to report on all those who have already expired in one or more certification, or are going to expire in the next 90 days. Some important notes: This is being run as part of a vbScript, so the 90-day date is being calculated when the script is run. I'm using 2010-08-31 as a placeholder since its the result at the time this question is being posted. All cards expire at the end of the month. (which is why the above date is for the end of August and not 90 days on the dot) A valid EP card supersedes ACLS certification, but only the latter is required of some employees. (wasn't going to worry about it until I got this question answered, but if I can get the help I'll take it) The CPR column contains the expiration date for the last class they took with us. (NULL if they didn't take any classes with us) The CPR_Imported column contains the expiration date for the last class they took somewhere else. (NULL if they didn't take it elsewhere, and bravo for following policy) The distinction between CPR classes is important for other reports. For purposes of this report, all we really care about is which one is the most current - or at least is currently current. If I have to, I'll ignore ACLS and PALS for the time being as it is non-compliance with CPR training that is the big issue at the moment. (not that the others won't be, but they weren't mentioned in the last meeting...) Here's the query I have so far, which is giving me good data: SELECT iEmp.LawsonID, iEmp.LastName, iEmp.FirstName, dept.AccCode2, dept.DisplayName, Exp.ACLS, Exp.EP, Exp.CPR, Exp.CPR_Imported, Exp.PALS, Exp.Note FROM (Lawson_Employees AS iEmp LEFT JOIN Lawson_DeptInfo AS dept ON dept.AccCode = iEmp.AccCode) LEFT JOIN tblExpirationDates AS Exp ON iEmp.LawsonID = Exp.EmpID WHERE iEmp.CurrentEmp = 1 AND ((Exp.ACLS <= #2010-08-31# AND Exp.ACLS IS NOT NULL) OR (Exp.CPR <= #2010-08-31# AND Exp.CPR_Imported <= #2010-08-31#) OR (Exp.PALS <= #2010-08-31# AND Exp.PALS IS NOT NULL)) ORDER BY dept.AccCode2, iEmp.LastName, iEmp.FirstName; After perusing the result set, I think I'm missing some expiration dates that should be in the result set. Am I missing something? This is the sucky part of being the only developer in the department... no one to ask for a little help.

    Read the article

  • Secure WS client with UsernameToken(SOAP security header)

    - by user79163
    Hi, I'm trying to secure my WS client to be able to call the WS. My code looks like this: SendSmsService smsService = new SendSmsService(); SendSms sendSMS = smsService.getSendSms(); BindingProvider stub = (BindingProvider)sendSMS; //Override endpoint with local copy of wsdl. String URL ="";//here is the wsdl url Map<String,Object> requestContext = stub.getRequestContext(); requestContext.put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, URL); //Set usernametoken URL fileURL = loader.getResource("client-config.xml"); File file = new File(fileURL.getFile()); FileInputStream clientConfig = null; try { clientConfig = new FileInputStream(file); } catch (FileNotFoundException e) { e.printStackTrace(); } XWSSecurityConfiguration config = null; try { config = SecurityConfigurationFactory.newXWSSecurityConfiguration(clientConfig); } catch (Exception e) { e.printStackTrace(); log.warn("Exception: "+e.getMessage()); } requestContext.put(XWSSecurityConfiguration.MESSAGE_SECURITY_CONFIGURATION, config); //Invoke the web service String requestId = null; try { requestId = sendSMS.sendSms(addresses, senderName, charging, message, receiptRequest); } catch (PolicyException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (ServiceException e) { // TODO Auto-generated catch block e.printStackTrace(); } and the config file looks like this: <xwss:JAXRPCSecurity xmlns:xwss="http://java.sun.com/xml/ns/xwss/config" optimize="true"> <xwss:Service> <xwss:SecurityConfiguration dumpMessages="true" xmlns:xwss="http://java.sun.com/xml/ns/xwss/config"> <xwss:UsernameToken name="username" password="password> </xwss:SecurityConfiguration> </xwss:Service> <xwss:SecurityEnvironmentHandler> util.SecurityEnvironmentHandler </xwss:SecurityEnvironmentHandler> </xwss:JAXRPCSecurity> The SecurityEnviromentHandler is a dummy class that implements javax.security.auth.callback.CallbackHandler. Authentication must be in compliance with Oasis Web Services Security Username Token Profile 1.0. But I'm constantly getting "Security header not valid" error. Where am I going wrong, can anyone tell me. I used wsimport(JAX_WS 2.1 to generate classes for my client) Note:Only thing I know about this WS is WSDL URL and user&pass for authentication

    Read the article

  • Building a Distributed Commerce Infrastructure in the Cloud using Azure and Commerce Server

    - by Lewis Benge
    One of the biggest questions I routinely get asked is how scalable Commerce Server is. Of course the text book answer is the product has been around for 10 years, powers some of the largest e-Commerce websites in the world, so it scales horizontally extremely well. One argument however though is what if you can't predict the growth of demand required of your Commerce Platform, or need the ability to scale up during busy seasons such as Christmas for a retail environment but are hesitant on maintaining the infrastructure on a year-round basis? The obvious answer is to utilise the many elasticated cloud infrastructure providers that are establishing themselves in the ever-growing market, the problem however is Commerce Server is still product which has a legacy tightly coupled dependency on Windows and IIS components. Commerce Server 2009 codename "R2" however introduced to the concept of an n-tier deployment of Microsoft Commerce Server, meaning you are no longer tied to core objects API but instead have serializable Commerce Entity objects, and business logic allowing for Commerce Server to now be built into a WCF-based SOA architecture. Presentation layers no-longer now need to remain on the same physical machine as the application server, meaning you can now build the user experience into multiple-technologies and host them in multiple places – leveraging the transport benefits that a WCF service may bring, such as message queuing, security, and multiple end-points. All of this logic will still need to remain in your internal infrastructure, for two reasons. Firstly cloud based computing infrastructure does not support PCI security requirements, and secondly even though many of the legacy Commerce Server dependencies have been abstracted away within this version of the application, it is still not a fully supported to be deployed exclusively into the cloud. If you do wish to benefit from the scalability of the cloud however, you can still achieve a great Commerce Server and Azure setup by utilising both the Azure App Fabric in terms of the service bus, and authentication services and Windows Azure to host any online presence you may require. The architecture would be something similar to this: This setup would allow you to construct your Commerce Services as part of your on-site infrastructure. These services would contain all of the channels custom business logic, and provide the overall interface back into the underlying Commerce Server components. It would be recommended that services are constructed around the specific business domain of the application, which based on your business model would usually consist of separate services around Catalogue, Orders, Search, Profiles, and Marketing. The App Fabric service bus is then used to abstract and aggregate further the services, making them available to the cloud and subsequently secured by App Fabrics authentication services. These services are now available for consumption by any client, using any supported technology – not just .NET. Thus meaning you are now able to construct apps for IPhone, integrate with Java based POS Devices, and any many other potential uses. This aggregation is useful, and forms the basis of the further strategy around diversifying and enhancing the e-Commerce experience, but also provides the foundation for the scalability we want to gain from utilising a cloud-based application platform. The Windows Azure application platform is Microsoft solution to benefiting from the true economies of scale in terms of the elasticity of the cloud. Just before the launch of the Azure Platform – Domino's pizza actually managed to run their whole SuperBowl operation from the scalability of Windows Azure, and simply switching back to their traditional operation the next day with no residual infrastructure costs. The platform also natively can subscribe to services and messages exposed within the AppFabric service bus, making it an ideal solution to build and deploy a presentation layer which will need to support of scalable infrastructure – such as a high demand public facing e-Commerce portal, or a promotion element of a brand. Windows Azure has excellent support for ASP.NET, including its own caching providers meaning expensive operations such as catalogue queries can persist in memory on the application server, reducing the demand on internal infrastructure and prioritising it for more business critical operations such as receiving orders and processing payments. Windows Azure also supports other languages too, meaning utilising this approach you can technically build a Commerce Server presentation layer in Java, PHP, or Ruby – or equally in ASP.NET or Silverlight without having to change any of the underlying business or Commerce Server implementation. This SOA-style architecture is one of the primary differentiators for Commerce Server as a product in the e-Commerce market, and now with the introduction of a WCF capability in Commerce Server 2009/2009 R2 the opportunities for extensibility of the both the user experience, and integration into third parties, are drastically increased, all with no effect to the underlying channel logic. So if you are looking at deployment options for your e-Commerce application to help support demand in a cost effective way. I would highly recommend you consider looking at Windows Azure, and if you have any questions in-particular about this style of deployment, please feel free to get in touch!

    Read the article

  • Find only physical network adapters with WMI Win32_NetworkAdapter class

    - by Mladen Prajdic
    WMI is Windows Management Instrumentation infrastructure for managing data and machines. We can access it by using WQL (WMI querying language or SQL for WMI). One thing to remember from the WQL link is that it doesn't support ORDER BY. This means that when you do SELECT * FROM wmiObject, the returned order of the objects is not guaranteed. It can return adapters in different order based on logged-in user, permissions of that user, etc… This is not documented anywhere that I've looked and is derived just from my observations. To get network adapters we have to query the Win32_NetworkAdapter class. This returns us all network adapters that windows detect, real and virtual ones, however it only supplies IPv4 data. I've tried various methods of combining properties that are common on all systems since Windows XP. The first thing to do to remove all virtual adapters (like tunneling, WAN miniports, etc…) created by Microsoft. We do this by adding WHERE Manufacturer!='Microsoft' to our WMI query. This greatly narrows the number of adapters we have to work with. Just on my machine it went from 20 adapters to 5. What was left were one real physical Realtek LAN adapter, 2 virtual adapters installed by VMware and 2 virtual adapters installed by VirtualBox. If you read the Win32_NetworkAdapter help page you'd notice that there's an AdapterType that enumerates various adapter types like LAN or Wireless and AdapterTypeID that gives you the same information as AdapterType only in integer form. The dirty little secret is that these 2 properties don't work. They are both hardcoded, AdapterTypeID to "0" and AdapterType to "Ethernet 802.3". The only exceptions I've seen so far are adapters that have no values at all for the two properties, "RAS Async Adapter" that has values of AdapterType = "Wide Area Network" and AdapterTypeID = "3" and various tunneling adapters that have values of AdapterType = "Tunnel" and AdapterTypeID = "15". In the help docs there isn't even a value for 15. So this property was of no help. Next property to give hope is NetConnectionId. This is the name of the network connection as it appears in the Control Panel -> Network Connections. Problem is this value is also localized into various languages and can have different names for different connection. So both of these properties don't help and we haven't even started talking about eliminating virtual adapters. Same as the previous one this property was also of no help. Next two properties I checked were ConfigManagerErrorCode and NetConnectionStatus in hopes of finding disabled and disconnected adapters. If an adapter is enabled but disconnected the ConfigManagerErrorCode = 0 with different NetConnectionStatus. If the adapter is disabled it reports ConfigManagerErrorCode = 22. This looked like a win by using (ConfigManagerErrorCode=0 or ConfigManagerErrorCode=22) in our condition. This way we get enabled (connected and disconnected adapters). Problem with all of the above properties is that none of them filter out the virtual adapters installed by virtualization software like VMware and VirtualBox. The last property to give hope is PNPDeviceID. There's an interesting observation about physical and virtual adapters with this property. Every virtual adapter PNPDeviceID starts with "ROOT\". Even VMware and VirtualBox ones. There were some really, really old physical adapters that had PNPDeviceID starting with "ROOT\" but those were in pre win XP era AFAIK. Since my minimum system to check was Windows XP SP2 I didn't have to worry about those. The only virtual adapter I've seen to not have PNPDeviceID start with "ROOT\" is the RAS Async Adapter for Wide Area Network. But because it is made by Microsoft we've eliminated it with the first condition for the manufacturer. Using the PNPDeviceID has so far proven to be really effective and I've tested it on over 20 different computers of various configurations from Windows XP laptops with wireless and bluetooth cards to virtualized Windows 2008 R2 servers. So far it always worked as expected. I will appreciate you letting me know if you find a configuration where it doesn't work. Let's see some C# code how to do this: ManagementObjectSearcher mos = null;// WHERE Manufacturer!='Microsoft' removes all of the // Microsoft provided virtual adapters like tunneling, miniports, and Wide Area Network adapters.mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft'");// Trying the ConfigManagerErrorCode and NetConnectionStatus variations // proved to still not be enough and it returns adapters installed by // the virtualization software like VMWare and VirtualBox// ConfigManagerErrorCode = 0 -> Device is working properly. This covers enabled and/or disconnected devices// ConfigManagerErrorCode = 22 AND NetConnectionStatus = 0 -> Device is disabled and Disconnected. // Some virtual devices report ConfigManagerErrorCode = 22 (disabled) and some other NetConnectionStatus than 0mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft' AND (ConfigManagerErrorCode = 0 OR (ConfigManagerErrorCode = 22 AND NetConnectionStatus = 0))");// Final solution with filtering on the Manufacturer and PNPDeviceID not starting with "ROOT\"// Physical devices have PNPDeviceID starting with "PCI\" or something else besides "ROOT\"mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft' AND NOT PNPDeviceID LIKE 'ROOT\\%'");// Get the physical adapters and sort them by their index. // This is needed because they're not sorted by defaultIList<ManagementObject> managementObjectList = mos.Get() .Cast<ManagementObject>() .OrderBy(p => Convert.ToUInt32(p.Properties["Index"].Value)) .ToList();// Let's just show all the properties for all physical adapters.foreach (ManagementObject mo in managementObjectList){ foreach (PropertyData pd in mo.Properties) Console.WriteLine(pd.Name + ": " + (pd.Value ?? "N/A"));}   That's it. Hope this helps you in some way.

    Read the article

  • concurrency::accelerator

    - by Daniel Moth
    Overview An accelerator represents a "target" on which C++ AMP code can execute and where data can reside. Typically (but not necessarily) an accelerator is a GPU device. Accelerators are represented in C++ AMP as objects of the accelerator class. For many scenarios, you do not need to obtain an accelerator object, since the runtime has a notion of a default accelerator, which is what it thinks is the best one in the system. Examples where you need to deal with accelerator objects are if you need to pick your own accelerator (based on your specific criteria), or if you need to use more than one accelerators from your app. Construction and operator usage You can query and obtain a std::vector of all the accelerators on your system, which the runtime discovers on startup. Beyond enumerating accelerators, you can also create one directly by passing to the constructor a system-wide unique path to a device if you know it (i.e. the “Device Instance Path” property for the device in Device Manager), e.g. accelerator acc(L"PCI\\VEN_1002&DEV_6898&SUBSYS_0B001002etc"); There are some predefined strings (for predefined accelerators) that you can pass to the accelerator constructor (and there are corresponding constants for those on the accelerator class itself, so you don’t have to hardcode them every time). Examples are the following: accelerator::default_accelerator represents the default accelerator that the C++ AMP runtime picks for you if you don’t pick one (the heuristics of how it picks one will be covered in a future post). Example: accelerator acc; accelerator::direct3d_ref represents the reference rasterizer emulator that simulates a direct3d device on the CPU (in a very slow manner). This emulator is available on systems with Visual Studio installed and is useful for debugging. More on debugging in general in future posts. Example: accelerator acc(accelerator::direct3d_ref); accelerator::direct3d_warp represents a target that I will cover in future blog posts. Example: accelerator acc(accelerator::direct3d_warp); accelerator::cpu_accelerator represents the CPU. In this first release the only use of this accelerator is for using the staging arrays technique that I'll cover separately. Example: accelerator acc(accelerator::cpu_accelerator); You can also create an accelerator by shallow copying another accelerator instance (via the corresponding constructor) or simply assigning it to another accelerator instance (via the operator overloading of =). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator objects between them to determine if they refer to the same underlying device. Querying accelerator characteristics Given an accelerator object, you can access its description, version, device path, size of dedicated memory in KB, whether it is some kind of emulator, whether it has a display attached, whether it supports double precision, and whether it was created with the debugging layer enabled for extensive error reporting. Below is example code that accesses some of the properties; in your real code you'd probably be checking one or more of them in order to pick an accelerator (or check that the default one is good enough for your specific workload): void inspect_accelerator(concurrency::accelerator acc) { std::wcout << "New accelerator: " << acc.description << std::endl; std::wcout << "is_debug = " << acc.is_debug << std::endl; std::wcout << "is_emulated = " << acc.is_emulated << std::endl; std::wcout << "dedicated_memory = " << acc.dedicated_memory << std::endl; std::wcout << "device_path = " << acc.device_path << std::endl; std::wcout << "has_display = " << acc.has_display << std::endl; std::wcout << "version = " << (acc.version >> 16) << '.' << (acc.version & 0xFFFF) << std::endl; } accelerator_view In my next blog post I'll cover a related class: accelerator_view. Suffice to say here that each accelerator may have from 1..n related accelerator_view objects. You can get the accelerator_view from an accelerator via the default_view property, or create new ones by invoking the create_view method that creates an accelerator_view object for you (by also accepting a queuing_mode enum value of deferred or immediate that we'll also explore in the next blog post). Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • EHome IR receiver and Ubuntu 13 - any one have this working?

    - by squakie
    I have a "generic" USB IR receiver I purchased off of Ebay to make my life a little easier with XBMC on my Ubuntu box. I am currently running 13.10 and have never tried nor have any knowledge of IR in Ubuntu. I know of lirc, and I know a lot of it is now included in the kernel. My understanding is that lirc in basic terms maps pulses from an remote control to functions - like keyboard or mouse clicks. It is also my understanding that I might still need a driver or something for my device. lsusb shows the device as: Bus 006 Device 003: ID 147a:e016 Formosa Industrial Computing, Inc. eHome Infrared Receiver dmesg shows the following pertaining to the device: [43635.311985] usb 6-2: USB disconnect, device number 2 [43641.344387] usb 6-2: new full-speed USB device number 3 using ohci-pci [43641.543454] usb 6-2: New USB device found, idVendor=147a, idProduct=e016 [43641.543467] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [43641.543473] usb 6-2: Product: eHome Infrared Transceiver [43641.543478] usb 6-2: Manufacturer: Formosa21 [43641.543483] usb 6-2: SerialNumber: FM000623 [43641.555736] Registered IR keymap rc-rc6-mce [43641.555968] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e016) as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/rc/rc2/input15 [43641.556221] rc2: Media Center Ed. eHome Infrared Remote Transceiver (147a:e016) as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/rc/rc2 [43641.556584] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input16 [43641.557186] rc rc2: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [43641.731965] mceusb 6-2:1.0: Registered Formosa21 eHome Infrared Transceiver with mce emulator interface version 1 [43641.731978] mceusb 6-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active) (excuse the double spacing, but I had to put in extra cr/lf using "enter" or the entire thing was just one long unreadable string). When I connect the same IR receiver to a Raspberry Pi running OpenELEC/XBMC there is no flashing led unless I press a remote button, and the device works. In Ubuntu, the led is constantly blinking, and nothing happens when I press a remote key. I tried the command line program to test but it never echoes anything back to the terminal window. I believe it must need some sort of driver or something else, but I am completely in the dark on this. If it matters I also have: - Logitech wireless keyboard/mouse USB receiver - Tenda USB wireless adapter And.....I've also noticed some errors now that show in dmesg that seem to somehow related to HDMI if that makes any sense: 46721.144731] HDMI: ELD buf size is 0, force 128 [46721.144749] HDMI: invalid ELD data byte 0 [46721.444025] HDMI: ELD buf size is 0, force 128 [46721.444061] HDMI: invalid ELD data byte 0 [46721.743375] HDMI: ELD buf size is 0, force 128 [46721.743411] HDMI: invalid ELD data byte 0 [46722.043092] HDMI: ELD buf size is 0, force 128 [46722.043118] HDMI: invalid ELD data byte 0 [46722.343086] HDMI: ELD buf size is 0, force 128 [46722.343122] HDMI: invalid ELD data byte 0 [46722.642517] HDMI: ELD buf size is 0, force 128 [46722.642574] HDMI: invalid ELD data byte 0 [46722.942459] HDMI: ELD buf size is 0, force 128 [46722.942485] HDMI: invalid ELD data byte 0 [46723.242103] HDMI: ELD buf size is 0, force 128 [46723.242129] HDMI: invalid ELD data byte 0 [46723.541877] HDMI: ELD buf size is 0, force 128 [46723.541923] HDMI: invalid ELD data byte 0 [58366.651954] HDMI: ELD buf size is 0, force 128 [58366.651980] HDMI: invalid ELD data byte 0 [58366.951523] HDMI: ELD buf size is 0, force 128 [58366.951549] HDMI: invalid ELD data byte 0 [58367.251075] HDMI: ELD buf size is 0, force 128 [58367.251121] HDMI: invalid ELD data byte 0 [58367.550517] HDMI: ELD buf size is 0, force 128 [58367.550563] HDMI: invalid ELD data byte 0 [58367.850219] HDMI: ELD buf size is 0, force 128 [58367.850256] HDMI: invalid ELD data byte 0 [58368.150160] HDMI: ELD buf size is 0, force 128 [58368.150185] HDMI: invalid ELD data byte 0 [58368.449544] HDMI: ELD buf size is 0, force 128 [58368.449570] HDMI: invalid ELD data byte 0 [58368.749583] HDMI: ELD buf size is 0, force 128 [58368.749629] HDMI: invalid ELD data byte 0 [58369.049280] HDMI: ELD buf size is 0, force 128 [58369.049326] HDMI: invalid ELD data byte 0 [58394.706273] HDMI: ELD buf size is 0, force 128 [58394.706300] HDMI: invalid ELD data byte 0 [58394.706350] HDMI: ELD buf size is 0, force 128 [58394.706367] HDMI: invalid ELD data byte 0 [58395.003032] HDMI: ELD buf size is 0, force 128 [58395.003058] HDMI: invalid ELD data byte 0 [58395.302680] HDMI: ELD buf size is 0, force 128 [58395.302705] HDMI: invalid ELD data byte 0 [58395.602442] HDMI: ELD buf size is 0, force 128 [58395.602477] HDMI: invalid ELD data byte 0 [58395.902143] HDMI: ELD buf size is 0, force 128 [58395.902179] HDMI: invalid ELD data byte 0 [58396.201839] HDMI: ELD buf size is 0, force 128 [58396.201875] HDMI: invalid ELD data byte 0 [58396.501538] HDMI: ELD buf size is 0, force 128 [58396.501574] HDMI: invalid ELD data byte 0 [58396.801232] HDMI: ELD buf size is 0, force 128 [58396.801268] HDMI: invalid ELD data byte 0 [58397.100583] HDMI: ELD buf size is 0, force 128 [58397.100627] HDMI: invalid ELD data byte 0 [63095.766042] systemd-hostnamed[8875]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! dave@davepc:~$ EDIT: Maybe another way to look at this would be what does Ubuntu do or not do that OpenELEC does or doesn't do (on Raspberry Pi) such that it works in OpenELEC but not in Ubuntu?

    Read the article

  • Cannot connect to secure wireless with Netgear wna3100 USB

    - by Vince Radice
    I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

    Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74  | Next Page >