Search Results

Search found 2823 results on 113 pages for 'perforce branch spec'.

Page 68/113 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Can I use an nVidia Geforce 9600GT for triple-monitor?

  - by John Rudy

  My work PC has (as you can guess from the title) a single Geforce 9600GT card. According to the spec page for this card, both DVI ports are Dual-Link DVI. Both are currently in use on Dell 19" 1280x1024 screens. I'm running Windows 7, with Aero enabled, for what that's worth. What I'm wondering is if I can use a standard DVI splitter cable to drive a third screen from one of the ports -- specifically a Samsung 22" 1680x1050. I'm really outgrowing the two-screen setup, and am strongly considering bringing in my home monitor (which is almost never used) to bolster my usable space. If I can't, then my alternative is to replace one of these Dells with that Samsung, to give me at least a "little" more space. (Before you ask, there's probably no chance I can get my company to spring for a second video card and third monitor. Even if I could, it would not be politically expedient, as a number of my other coworkers are already pretty jealous at my setup.)

  Read the article

• Performance improvements of VBulletin by integrating the plugins

  - by reggie

  I have amassed quite a lot of plugins and code that is being hooked into VBulletin's plugin system. There are good uses for this system. But since I am now locked in with the VB 3 branch and it is no longer updated, I wonder what kind of performance improvements I would see if I integrated all the plugins into the vbulletin files and turned the plugin system completely off. My site has about 1.5 mio posts, about 100,000 threads, 100,000 members (of which 10,000 are "active"). I estimate I have about 200 plugins from different products in the plugin manager. Has anybody ever tried this move and could share the experiences?

  Read the article

• apache and ajp performance

  - by user12145

  I have an apache sitting in front of two tomcat app servers(one on the same physical server, the other on a different one) that does time consuming work(0.5 sec to 10sec per request). The apache http server is getting killed by an average of 1 to 2 concurrent requests per second. both Server spec is about 2GB of RAM. Is there a way to optimize apache to handle the load? any advise is welcome. BalancerMember ajp://localhost:8009/xxxxxx BalancerMember ajp://XXX.XX.XXX.XX:8009/xxxxxx I keep getting the following in apache2.2 log: [Mon Dec 28 00:31:02 2009] [error] ajp_read_header: ajp_ilink_receive failed [Mon Dec 28 00:31:02 2009] [error] (120006)APR does not understand this error code: proxy: read response failed from 127.0.0.1:8009 (localhost)

  Read the article

• YouTube style linking inside HTML5 Video player

  - by Barney

  After a video has played on YouTube, often there will be a follow up link after the video has finished playing in the form of related videos. I'm looking to implement similar into my HTML5 Video. It would look something like this: At the moment, it seems there is nothing in the W3C spec for this (Links inside HTML5 video). Could anyone advise on a method of achieving? I have 50-100 videos on my site on which I would like to implement. Currently I'm thinking a Javascript callback which initiates the Call to action buttons, though I have a feeling this could get complicated...

  Read the article

• web based source control management software [closed]

  - by tom smith

  hi. not sure if this is the right place, but hopefully someone might have thoughts on a solution/vendor. Starting to spec out a project that will require multiple (50-100) developers to be able to manipulate source files/scripts for a large scale project. The idea is to be able to have each app go through a dev/review/test process, where the users can select (or be assigned) the role they're going to have for the given app. I'm looking for web-based, version control, issue tracking, user roles/access, workflow functionality, etc... Ideally, the process will also allow for the reviewed/valid app to then be exported to a separate system for testing on the test server/environment. This can be hosted on our servers, or we can do the colo process. I've checked out Alassian/Collabnet, but any thoughts you can provide would me appreciated as well. thanks

  Read the article

• How to put 1000 lightweight server applications in the cloud

  - by Dan Bird

  The company I work for sells a commercial desktop/server app that runs on any non dedicated Windows PC or server and uses Tomcat for all interactions with the application. Customers are asking that we host their instance of the application so they don't have to run it locally on their own servers. The app is lightweight and an average server, in theory, could handle 25-50 instances before users would notice a slowdown. However only 1 instance can run per Windows instance (because the application writes to a common registry branch) so we'd need something like VMWare to create 25-50 Windows instances. We know we eventually need to reprogram to make it truly cloud-worthy but what would you recommend for a server farm or whatever for this? We don't have the setup to purchase our own servers so we must use a 3rd party. We have budgeted $500 - $1000 per year per customer for this service. Thanks in advance for your suggestions, experiences and guidance.

  Read the article

• replace controller, add second controller, or use expander?

  - by longneck

  I have a Proliant DL380 G6 that I am re-purposing as a Hyper-V host for a new, off-site data center that will host our DR services. The server currently has a P410i controller with the 512MB BBWC module. The drives installed are SFF 6G 10K drives. I plan to add the HP 516914-B21 drive cage, which gives me 8 more SFF drives, bringing the total to 16. To get the additional 8 drives connected, I have one of three choices: Install a new controller that can support 16 drives. Install a second controller. Install a SAS expander, such as the HP 468406-B21 recommended by HP's spec sheet for my server. My question is: how do I know if I'm going hit a performance ceiling by putting 16 drives on the P410i or using the expander? And if I am, how do I select an appropriate controller? I'm not sure what specifications I should be looking at.

  Read the article

• Disadvantages of enabling AHCI after Win7 install

  - by Mario De Schaepmeester

  I've formatted my notebook that has a 5400RPM HDD with ~500GB capacity. After installing Windows 7 and about half the drivers (including chipset) I began to doubt whether to go for IDE or AHCI mode for my hard drive. There used to be a lot of discussion on the internet which is better and so far I understood it was particularly helpful on SSDs. Now the general consensus seems to be that AHCI mode is best for most hard drives. I have thus enabled AHCI in the middle of configuring my notebook (rest of the drivers, necessary software etc...) Two questions: considering my HDD's spec above, should I leave it on? Is there any disadvantage of enabling it after Windows 7 and chipset drivers installation? Windows 7 version is 64 bit Home Premium.

  Read the article

• Project specific help [closed]

  - by Sushant Jain

  Hi friends, I am in final year of engineering with Information Technology branch. I have to make my final year project based on Linux/UNIX platform. But until now i couldn't find any good project idea that will be useful for my future industrial career also. So please help me if you have any good project idea related to any field in Linux that gives us a leading edge in my career. and please suggest me sources that will be helpful to me in making that project. Thanks in advance.....

  Read the article

• Suspected power supply issue? PC repeatedly whirs for some seconds and then dies.

  - by benwebdev

  I've come home today and switched on the PC I've built a few months ago only for the machine to whir for a few short seconds and then die. It repeats this until I disconnect the power lead. Nothing is output to the screen and this cut out happens very quickly after switching it on. What could this be and how could it be fixed? Is it the power supply? I'm in despair :-( My spec is below, everything is new and was bought and assembled within the last 6months, system has been fantastic until now. Power Supply: 620W CoolerMaster Real Power M620 Motherboard: Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Processor: Intel Core i7 930 2.80GHz @ 4.00GHz RAM: 6GB DDR3 OS Windows 7 64bit Sapphire HD 5770 Vapor-X 1GB Graphics card 1TB Hitachi HDD 720GB Seagate Barracuda HDD 350GB Seagate Barracuda HDD EMu 0404 PCI Soundcard D-Link PCI-E wireless card Samsung DVD RW drive

  Read the article

• Extract registry key from NTBackup System State backup

  - by phoenix8

  A Windows Server 2003 machine died recently but I need some information that was contained in the now-defunct server's registry. I have a "System State" backup file created by the Windows Server 2003 built-in backup program (NTBackup.exe). Is there any way to extract a key/value out of the backup file? I might be able do a Win2003 install on a similar machine then do a system-state restore but that's a lot of effort and I don't know for certain that the system-state restore will work on a different spec machine. (Would it work if I booted up in 'safe mode'?) But I'd really rather just get at the data straight out of the NTBackup file zip-file-esque styles if that's possible.

  Read the article

• Second monitor not detected

  - by Gabriel

  Hi I have two VGA monitors, my GPU is ATI PowerColor 6850 which has two DVI slots, I use adapters for both VGA monitors. If I connect any the two monitors in the first slot it will work right away (along the plugin confirmation sound). And if I connect any of both monitors to the second slot I won't get anything, nor a signal or confirmation sound. I also tried auto detecting via Catalyst Control Center and Windows Desktop Resolution. I have the latest drivers installed. EDIT: I found this on the Spec Description: Display Connectors DL-DVI-I/SL-DVI-D And in NewEgg: 2 x DVI (1 Single Link, 1 Dual Link) Could this have anything to do with my issue?

  Read the article

• Why has ESXi 5.0 not used the software RAID configuration on my test server?

  - by kafka

  I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

  Read the article

• SQL server availability issue: large query stops other connections from connecting

  - by Carlos

  I've got a high-spec (multicore, RAID) server running MS SQL 2008, with several databases on it. I have a low throughput process that periodically needs a small amount of information from one of the DBs, and the code seems to work fine. However, sometimes when one of my colleagues does a huge query against one of the other DBs, I see full CPU usage on the machine, and connections from my app time out. Why does this happen? I would have thought the many cores and harddisks would somehow (together with cleverly written DB server) be able to keep at least some of the resources free for other apps? I'm pretty sure he doesn't use multiple connections for his query. What can I do to prevent this?

  Read the article

• X58 RAID 10 - Am I forced to use Sata2?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. I contacted my supplier who suggested a gigabyte X58A motherboard and 4 Western Digital Caviar black 6Gb/s disks. I have checked the spec for the X58A board, however, and it says: SATA 3Gb/s: RAID 0, RAID 1, RAID 5, and RAID 10 SATA 6Gb/s: RAID 0, and RAID 1. I'm losing half the bandwidth because I'm forced to use SATA2! What should I do?

  Read the article

• Does Dreamweaver subversion support branching?

  - by John Isaacks

  Adobe Dreamweaver added support for subversion in CS4. I have CS5, I am able to update and commit, they even have a very easy rollback option where you can promote any revision number to "head" but I cannot figure out anyway to branch using it. According to Adobe their subversion support is not full featured. But I cannot find any resource that stats what all is supported. So is branching one of the things not supported? (I kind of feel like whats the point without branching?) If you can do it, how?

  Read the article

• How can I port forward over a VPN NAT?

  - by Charlie

  I have a multi-site VPN currently running with pfSense boxes and currently using OpenVPN. However I can change the OS and VPN type if need be. The main router has a 10.13.0.0/16 subnet and a series of public IPs For example, a branch has a 10.12.1.0/24 subnet How can I port forward NAT traffic on a public IP of the main router to a server behind the NAT of the second? So for instance port 95 on a public IP assigned to the main router forwards to 10.12.1.102 on the other router. Is this even possible? Currently my setup works great but only for intertnal traffic

  Read the article

• Windows Server 2008 R2 foundation VM unable to detect network adaptor

  - by user50273

  I created a Windows Server 2008 R2 foundation VM on Windows Server 2008 using Hyper-V. But I am not able to connect to internet from the VM. If I goto device manager, the network adapter branch itself is missing. I searched in google and few sites suggested I need to install the Integration Services although in one site they said Server 2008 R2 comes with integration services installed. Anyways I tried to install IntegrationServices using hyper-v but I get error dialog "error: unable to launch one of the update programs". Any suggestions on what am I supposed to do?

  Read the article

• I have problem with pc. Random reboots with post hyper transport sync flood error

  - by user29867

  I have problem with my pc. Random reboots with post "hyper transport sync flood" error. It happens completely random. Most times i watch movie, some times when i play a game, even when i browse internet. My spec are as follow: MB ASUS M4A78-E CPU Phenom II 940 Sapphire Radeon hd4850 Vapor-X RAM OCZ DDR2 PC2-8500 kit 2x2GB PSU CM Real Power M520W CASE CM Centurion 590 Temps of MB, CPU and 4850 are in normal range. MB is hooter, around 60-70°C under load, Radeon 60-65°C under load (playing game for couple hours). CPU dos not past 50-55°C. So i think its not a cooling problem, CM case is pretty good, and have a lots of fans. I try with this memmory: TWIN2X4096-6400C5DHX same problem.

  Read the article

• Dell PowerEdge 2950 III running XenServer with 2 VMs gets sluggish after a week and needs rebooted?

  - by Joshua Rountree

  It has weird hangs and then random CPU spikes that do a ton at once. While remoted into the VMs I get an update all at once then it hangs for another 20 seconds. When it lets it go through I get a CPU spike. Basic server specs for the HW node is: 8 CPUs, 16GB ram 1TB HDD total iPERC6 raid 10 The VMs are barely used but I have them spec'd at VM 1: 4 CPUs, 4GB Ram VM2: 4 CPUs 6GB ram The HW node currently says it's total CPU usage is 11% AND Used Memory is at 63%out of 16GB I'm new to this stuff so I'm not sure. I just recently installed this and set it all up. Please advise if you can!

  Read the article

• Best window manager for Linux for Virtual Desktop / Multimon

  - by mattcodes

  Previous used Ubuntu Gnome with Compiz but for my basic spec intel macbook (4 years old) its a little too heavyweight. So for now Im back on my macbook with os x, but now considering going back to Linux. Im looking for a window manager that has the following properties: 1) Supports virtual desktop (need 4 minimum) 2) Works well with multi monitors - can move an app with shortcut from one monitor to the other (on same virtual desktop) 3) Can remember window position (i.e. open vim on 2 monitor) - however must coerce everything back to first window when 2nd screen is unplugged 4) Keyboard shortcut friendly 5) Not too hard to install 6) Works well with minimum hardware such as integrated graphics Please suggest and share your experiences

  Read the article

• Virtualbox, merging snapshots and base disk

  - by Henrik

  Hi, I have a virtual machine with about 30 snapshots in branches. The current development path is 22 snapshots plus the base disk. The amount of files is seemingly having an impact now on IO and the dev laptop I'm using (don't know if it is host disk performance issues with the 140GB total size over a lot of fragments, or just the fact that it is hitting sectors distributed across a lot of files). I would like to merge the current development branch of snapshots together with the base disk, but I am unsure if the following command would produce the correct outcome. I am not able to boot this disk after the procedure completes (5-6 hours). vboxmanage clonehd "C:\VPC-Storage\.VirtualBox\Machines\CRM\Snapshots\{245b27ac-e658-470a-b978-8e62137c33b1}.vhd" "E:\crm-20100624.vhd" --format VHD --type normal Could anyone confirm if this is the correct approach or not?

  Read the article

• Lightweight window manager for Linux for Virtual Desktop / Multimon

  - by mattcodes

  Previous used Ubuntu Gnome with Compiz but for my basic spec intel macbook (4 years old) its a little too heavyweight. So for now Im back on my macbook with os x, but now considering going back to Linux. Im looking for a window manager that has the following properties: Supports virtual desktop (need 4 minimum) Works well with multi monitors - can move an app with shortcut from one monitor to the other (on same virtual desktop) Can remember window position (i.e. open vim on 2 monitor) - however must coerce everything back to first screen when 2nd screen is unplugged Keyboard shortcut friendly Not too hard to install Works well with minimum hardware such as integrated graphics Please suggest and share your experiences

  Read the article

• What methods are there to configure puppet to serve resources for multiple environments?

  - by cclark

  I seem to come across two ways for using puppet in multiple environments: 1) Install a puppetmaster in each environment and only update the recipes from source control for that environment when ready to deploy the recipes in that environment. 2) Use one puppetmaster and use a variable in the puppet.conf of each client to specify the environment and then in the puppetmaster specify a different modulepath for each environment and each of those paths is updated to the branch of the recipe repository intended for that environment (e.g. dev, staging, production). Only running one puppetmaster seems like it is one less piece of infrastructure to keep running but there is some additional complexity in the configuration. Are there additional pros or cons to one of these methods or something which I'm missing entirely?

  Read the article

• Exchange and external mail server

  - by Bahrain Admin

  Hi, We have our domain hosted externally with Network Solutions, and our mail server is running from there. We have a branch office in Bahrain and have 3 users who would like to use their email addresses on a local exchange server running at the Bahrain office. The Exchange server is currently only used for internal mail,contacts and calendaring. I've used a third=party program to download the POP3 mail to their exchange accounts. so they can receive mail from outside. The issue is in sending mail using their external addresses. I've setup their exchange accounts to include their external address. But we get an error message stating that the IP is not authorized. I tried putting the local ISP as the smart host, but then we get an error message stating that the Address was rejected. I tried using our own external mail server as the smart host, but then the message "Relaying is denied" comes up. Any suggestions? Thanks Arun

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >