Search Results

Search found 13324 results on 533 pages for 'send on behalf of'.

Page 68/533 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• How to design a scalable notification system?

  - by Trent

  I need to write a notification system manager. Here is my requirements: I need to be able to send a Notification on different platforms, which may be totally different (for exemple, I need to be able to send either an SMS or an E-mail). Sometimes the notification may be the same for all recipients for a given platform, but sometimes it may be a notification per recipients (or several) per platform. Each notification can contain platform specific payload (for exemple an MMS can contains a sound or an image). The system need to be scalable, I need to be able to send a very large amount of notification without crashing either the application or the server. It is a two step process, first a customer may type a message and choose a platform to send to, and the notification(s) should be created to be processed either real-time either later. Then the system needs to send the notification to the platform provider. For now, I end up with some though but I don't know how scalable it will be or if it is a good design. I've though of the following objects (in a pseudo language): a generic Notification object: class Notification { String $message; Payload $payload; Collection<Recipient> $recipients; } The problem with the following objects is what if I've 1.000.000 recipients ? Even if the Recipient object is very small, it'll take too much memory. I could also create one Notification per recipient, but some platform providers requires me to send it in batch, meaning I need to define one Notification with several Recipients. Each created notification could be stored in a persistent storage like a DB or Redis. Would it be a good it to aggregate this later to make sure it is scalable? On the second step, I need to process this notification. But how could I distinguish the notification to the right platform provider? Should I use an object like MMSNotification extending an abstract Notification? or something like Notification.setType('MMS')? To allow to process a lot of notification at the same time, I think a messaging queue system like RabbitMQ may be the right tool. Is it? It would allow me to queue a lot of notification and have several worker to pop notification and process them. But what if I need to batch the recipients as seen above? Then I imagine a NotificationProcessor object for which I could I add NotificationHandler each NotificationHandler would be in charge to connect the platform provider and perform notification. I can also use an EventManager to allow pluggable behavior. Any feedbacks or ideas? Thanks for giving your time. Note: I'm used to work in PHP and it is likely the language of my choice.

  Read the article

• Windows Azure Service Bus Scatter-Gather Implementation

  - by Alan Smith

  One of the more challenging enterprise integration patterns that developers may wish to implement is the Scatter-Gather pattern. In this article I will show the basic implementation of a scatter-gather pattern using the topic-subscription model of the windows azure service bus. I’ll be using the implementation in demos, and also as a lab in my training courses, and the pattern will also be included in the next release of my free e-book the “Windows Azure Service Bus Developer Guide”. The Scatter-Gather pattern answers the following scenario. How do you maintain the overall message flow when a message needs to be sent to multiple recipients, each of which may send a reply? Use a Scatter-Gather that broadcasts a message to multiple recipients and re-aggregates the responses back into a single message. The Enterprise Integration Patterns website provides a description of the Scatter-Gather pattern here.   The scatter-gather pattern uses a composite of the publish-subscribe channel pattern and the aggregator pattern. The publish-subscribe channel is used to broadcast messages to a number of receivers, and the aggregator is used to gather the response messages and aggregate them together to form a single message. Scatter-Gather Scenario The scenario for this scatter-gather implementation is an application that allows users to answer questions in a poll based voting scenario. A poll manager application will be used to broadcast questions to users, the users will use a voting application that will receive and display the questions and send the votes back to the poll manager. The poll manager application will receive the users’ votes and aggregate them together to display the results. The scenario should be able to scale to support a large number of users.   Scatter-Gather Implementation The diagram below shows the overall architecture for the scatter-gather implementation.       Messaging Entities Looking at the scatter-gather pattern diagram it can be seen that the topic-subscription architecture is well suited for broadcasting a message to a number of subscribers. The poll manager application can send the question messages to a topic, and each voting application can receive the question message on its own subscription. The static limit of 2,000 subscriptions per topic in the current release means that 2,000 voting applications can receive question messages and take part in voting. The vote messages can then be sent to the poll manager application using a queue. The voting applications will send their vote messages to the queue, and the poll manager will receive and process the vote messages. The questions topic and answer queue are created using the Windows Azure Developer Portal. Each instance of the voting application will create its own subscription in the questions topic when it starts, allowing the question messages to be broadcast to all subscribing voting applications. Data Contracts Two simple data contracts will be used to serialize the questions and votes as brokered messages. The code for these is shown below.   [DataContract] public class Question {     [DataMember]     public string QuestionText { get; set; } }     To keep the implementation of the voting functionality simple and focus on the pattern implementation, the users can only vote yes or no to the questions.   [DataContract] public class Vote {     [DataMember]     public string QuestionText { get; set; }       [DataMember]     public bool IsYes { get; set; } }     Poll Manager Application The poll manager application has been implemented as a simple WPF application; the user interface is shown below. A question can be entered in the text box, and sent to the topic by clicking the Add button. The topic and subscriptions used for broadcasting the messages are shown in a TreeView control. The questions that have been broadcast and the resulting votes are shown in a ListView control. When the application is started any existing subscriptions are cleared form the topic, clients are then created for the questions topic and votes queue, along with background workers for receiving and processing the vote messages, and updating the display of subscriptions.   public MainWindow() {     InitializeComponent();       // Create a new results list and data bind it.     Results = new ObservableCollection<Result>();     lsvResults.ItemsSource = Results;       // Create a token provider with the relevant credentials.     TokenProvider credentials =         TokenProvider.CreateSharedSecretTokenProvider         (AccountDetails.Name, AccountDetails.Key);       // Create a URI for the serivce bus.     Uri serviceBusUri = ServiceBusEnvironment.CreateServiceUri         ("sb", AccountDetails.Namespace, string.Empty);       // Clear out any old subscriptions.     NamespaceManager = new NamespaceManager(serviceBusUri, credentials);     IEnumerable<SubscriptionDescription> subs =         NamespaceManager.GetSubscriptions(AccountDetails.ScatterGatherTopic);     foreach (SubscriptionDescription sub in subs)     {         NamespaceManager.DeleteSubscription(sub.TopicPath, sub.Name);     }       // Create the MessagingFactory     MessagingFactory factory = MessagingFactory.Create(serviceBusUri, credentials);       // Create the topic and queue clients.     ScatterGatherTopicClient =         factory.CreateTopicClient(AccountDetails.ScatterGatherTopic);     ScatterGatherQueueClient =         factory.CreateQueueClient(AccountDetails.ScatterGatherQueue);       // Start the background worker threads.     VotesBackgroundWorker = new BackgroundWorker();     VotesBackgroundWorker.DoWork += new DoWorkEventHandler(ReceiveMessages);     VotesBackgroundWorker.RunWorkerAsync();       SubscriptionsBackgroundWorker = new BackgroundWorker();     SubscriptionsBackgroundWorker.DoWork += new DoWorkEventHandler(UpdateSubscriptions);     SubscriptionsBackgroundWorker.RunWorkerAsync(); }     When the poll manager user nters a question in the text box and clicks the Add button a question message is created and sent to the topic. This message will be broadcast to all the subscribing voting applications. An instance of the Result class is also created to keep track of the votes cast, this is then added to an observable collection named Results, which is data-bound to the ListView control.   private void btnAddQuestion_Click(object sender, RoutedEventArgs e) {     // Create a new result for recording votes.     Result result = new Result()     {         Question = txtQuestion.Text     };     Results.Add(result);       // Send the question to the topic     Question question = new Question()     {         QuestionText = result.Question     };     BrokeredMessage msg = new BrokeredMessage(question);     ScatterGatherTopicClient.Send(msg);       txtQuestion.Text = ""; }     The Results class is implemented as follows.   public class Result : INotifyPropertyChanged {     public string Question { get; set; }       private int m_YesVotes;     private int m_NoVotes;       public event PropertyChangedEventHandler PropertyChanged;       public int YesVotes     {         get { return m_YesVotes; }         set         {             m_YesVotes = value;             NotifyPropertyChanged("YesVotes");         }     }       public int NoVotes     {         get { return m_NoVotes; }         set         {             m_NoVotes = value;             NotifyPropertyChanged("NoVotes");         }     }       private void NotifyPropertyChanged(string prop)     {         if(PropertyChanged != null)         {             PropertyChanged(this, new PropertyChangedEventArgs(prop));         }     } }     The INotifyPropertyChanged interface is implemented so that changes to the number of yes and no votes will be updated in the ListView control. Receiving the vote messages from the voting applications is done asynchronously, using a background worker thread.   // This runs on a background worker. private void ReceiveMessages(object sender, DoWorkEventArgs e) {     while (true)     {         // Receive a vote message from the queue         BrokeredMessage msg = ScatterGatherQueueClient.Receive();         if (msg != null)         {             // Deserialize the message.             Vote vote = msg.GetBody<Vote>();               // Update the results.             foreach (Result result in Results)             {                 if (result.Question.Equals(vote.QuestionText))                 {                     if (vote.IsYes)                     {                         result.YesVotes++;                     }                     else                     {                         result.NoVotes++;                     }                     break;                 }             }               // Mark the message as complete.             msg.Complete();         }       } }     When a vote message is received, the result that matches the vote question is updated with the vote from the user. The message is then marked as complete. A second background thread is used to update the display of subscriptions in the TreeView, with a dispatcher used to update the user interface. // This runs on a background worker. private void UpdateSubscriptions(object sender, DoWorkEventArgs e) {     while (true)     {         // Get a list of subscriptions.         IEnumerable<SubscriptionDescription> subscriptions =             NamespaceManager.GetSubscriptions(AccountDetails.ScatterGatherTopic);           // Update the user interface.         SimpleDelegate setQuestion = delegate()         {             trvSubscriptions.Items.Clear();             TreeViewItem topicItem = new TreeViewItem()             {                 Header = AccountDetails.ScatterGatherTopic             };               foreach (SubscriptionDescription subscription in subscriptions)             {                 TreeViewItem subscriptionItem = new TreeViewItem()                 {                     Header = subscription.Name                 };                 topicItem.Items.Add(subscriptionItem);             }             trvSubscriptions.Items.Add(topicItem);               topicItem.ExpandSubtree();         };         this.Dispatcher.BeginInvoke(DispatcherPriority.Send, setQuestion);           Thread.Sleep(3000);     } }       Voting Application The voting application is implemented as another WPF application. This one is more basic, and allows the user to vote “Yes” or “No” for the questions sent by the poll manager application. The user interface for that application is shown below. When an instance of the voting application is created it will create a subscription in the questions topic using a GUID as the subscription name. The application can then receive copies of every question message that is sent to the topic. Clients for the new subscription and the votes queue are created, along with a background worker to receive the question messages. The voting application is set to receiving mode, meaning it is ready to receive a question message from the subscription.   public MainWindow() {     InitializeComponent();       // Set the mode to receiving.     IsReceiving = true;       // Create a token provider with the relevant credentials.     TokenProvider credentials =         TokenProvider.CreateSharedSecretTokenProvider         (AccountDetails.Name, AccountDetails.Key);       // Create a URI for the serivce bus.     Uri serviceBusUri = ServiceBusEnvironment.CreateServiceUri         ("sb", AccountDetails.Namespace, string.Empty);       // Create the MessagingFactory     MessagingFactory factory = MessagingFactory.Create(serviceBusUri, credentials);       // Create a subcription for this instance     NamespaceManager mgr = new NamespaceManager(serviceBusUri, credentials);     string subscriptionName = Guid.NewGuid().ToString();     mgr.CreateSubscription(AccountDetails.ScatterGatherTopic, subscriptionName);       // Create the subscription and queue clients.     ScatterGatherSubscriptionClient = factory.CreateSubscriptionClient         (AccountDetails.ScatterGatherTopic, subscriptionName);     ScatterGatherQueueClient =         factory.CreateQueueClient(AccountDetails.ScatterGatherQueue);       // Start the background worker thread.     BackgroundWorker = new BackgroundWorker();     BackgroundWorker.DoWork += new DoWorkEventHandler(ReceiveMessages);     BackgroundWorker.RunWorkerAsync(); }     I took the inspiration for creating the subscriptions in the voting application from the chat application that uses topics and subscriptions blogged by Ovais Akhter here. The method that receives the question messages runs on a background thread. If the application is in receive mode, a question message will be received from the subscription, the question will be displayed in the user interface, the voting buttons enabled, and IsReceiving set to false to prevent more questing from being received before the current one is answered.   // This runs on a background worker. private void ReceiveMessages(object sender, DoWorkEventArgs e) {     while (true)     {         if (IsReceiving)         {             // Receive a question message from the topic.             BrokeredMessage msg = ScatterGatherSubscriptionClient.Receive();             if (msg != null)             {                 // Deserialize the message.                 Question question = msg.GetBody<Question>();                   // Update the user interface.                 SimpleDelegate setQuestion = delegate()                 {                     lblQuestion.Content = question.QuestionText;                     btnYes.IsEnabled = true;                     btnNo.IsEnabled = true;                 };                 this.Dispatcher.BeginInvoke(DispatcherPriority.Send, setQuestion);                 IsReceiving = false;                   // Mark the message as complete.                 msg.Complete();             }         }         else         {             Thread.Sleep(1000);         }     } }     When the user clicks on the Yes or No button, the btnVote_Click method is called. This will create a new Vote data contract with the appropriate question and answer and send the message to the poll manager application using the votes queue. The user voting buttons are then disabled, the question text cleared, and the IsReceiving flag set to true to allow a new message to be received.   private void btnVote_Click(object sender, RoutedEventArgs e) {     // Create a new vote.     Vote vote = new Vote()     {         QuestionText = (string)lblQuestion.Content,         IsYes = ((sender as Button).Content as string).Equals("Yes")     };       // Send the vote message.     BrokeredMessage msg = new BrokeredMessage(vote);     ScatterGatherQueueClient.Send(msg);       // Update the user interface.     lblQuestion.Content = "";     btnYes.IsEnabled = false;     btnNo.IsEnabled = false;     IsReceiving = true; }     Testing the Application In order to test the application, an instance of the poll manager application is started; the user interface is shown below. As no instances of the voting application have been created there are no subscriptions present in the topic. When an instance of the voting application is created the subscription will be displayed in the poll manager. Now that a voting application is subscribing, a questing can be sent from the poll manager application. When the message is sent to the topic, the voting application will receive the message and display the question. The voter can then answer the question by clicking on the appropriate button. The results of the vote are updated in the poll manager application. When two more instances of the voting application are created, the poll manager will display the new subscriptions. More questions can then be broadcast to the voting applications. As the question messages are queued up in the subscription for each voting application, the users can answer the questions in their own time. The vote messages will be received by the poll manager application and aggregated to display the results. The screenshots of the applications part way through voting are shown below. The messages for each voting application are queued up in sequence on the voting application subscriptions, allowing the questions to be answered at different speeds by the voters.

  Read the article

• How do i make/setup a mailing list?

  - by acidzombie24

  I know i could program it myself but maybe there is a simple (thats the keyword) package. I like to add a box, snippet, form or page to my site for users to input their email address. Then i'd like it to automatically send email saying you have successfully subscribe. I'd want an unsubscribe link and i would be using smtp on google apps. I would like to send email with html so i can have a simple sentence with a complex link such as this I dont know if i'll get marked as spam if i try to send everyone an email at once? so i'd like the software to manage it. Also i'd like to get the emails in a simple format like csv. Is there a simple app that does this? if not i can write a simple form which does a simple insert (or delete when unsubscribing) and write a 200-300line app to send my emails out for me.

  Read the article

• Networking Client Server Packet logic (How they communicate)

  - by Trixmix

  I want to know what is the logic behind server client communication through packets for a real time game. for example the server sends x packets then the client receives x packets and processes them.. Basically what is the process to keep the client and server in sync and able to receive and send packets. more in depth example of what I want to know: client step 1 wait for a packet step 2 read x packets step 3 process x packets step 4 send x packets and so on... I need to know the very basic outline of the communication. Big questions are: 1) do I send and read packets all at one time? i.e for loop though the incoming packets array list and read them all or one every server loop or what... 2) what order should I do things i.e first receive then read then process then send etc.. 3) what I asked above a step by step of what the server / client should do.. Thanks!

  Read the article

• Sending a small number of targeted emails, is it spamming?

  - by Alex Mor

  I have a directory website and I want to send focused emails, a small amount, less than 50 a month, to some of the businesses on my directory that get many visitors. The intention is to let them now many people are viewing there page and encourage them to update it and post information on it. How can I send this small number of emails without being targeted as spam? Also, should I send it from an email with the websites domain or will it better to send from a personal email? that way at least of email is tagged as spam sometimes it won't hurt the website's reputation, is this true?

  Read the article

• I'm using a shared server, and as such Gmail marks my email as spam (all from headers are different from the same IP)

  - by chipperyman573

  I have a shared server, meaning many people share the same IP. When I send an email, the @website.com is different from someone else that shares the same IP with me, therefore Gmail marks it as spam. For example: My website's IP is 1.2.3.4. My website is mywebsite.com Person 2's website's IP is hosted by the same host, and as such their IP is 1.2.3.4 Person 2's website is person2.com. When they send an email, it gets sent from [email protected] When I send an email, it gets sent from [email protected] According to Gmail's spam thing: "Use the same address in the 'From:' header on every bulk mail you send." Again, the only similarities between our websites is the IP. However, this causes Gmail to mark both our mail as spam. Is there a way to sort this out with Gmail?

  Read the article

• Boss solution vs Developer solution

  - by mahen23

  The problem: When we were sending newsletters to customers, there was no way to confirm if the customer already received the mail. So the boss decided to implement this idea: Boss's Idea: Each time mail was being sent, do an INSERT in a db with the title of the newsletter being sent and the email address which is receving the email address. To ensure that any email address does not receive the same email twice, do a SELECT in the table and find the title of the newsletter being sent: if (title of newsletter is found) { check to see of the email we are sending mail to is already present. if it does, do not send mail } else { send mail } MY idea: create a column called unique and mark it as UNIQUE. Each time mail was being sent, concatenate email + newsletter id and record it in the UNIQUE row. The next time we do a "mysql_affected_rows" check to see if our INSERT was successful, we send the mail, else, there is already a duplicate and no need to send it.

  Read the article

• CloudMail

  - by kaleidoscope

  In Web Applications, we often come across requirement of sending and receiving emails through our application. So same can be for the applications hosted on Azure. So Do you want to send email from an application hosted on Azure? CloudMail is one of the possible answers. CloudMail is designed to provide a small, effective and reliable solution for sending email from the Azure platform directly addressing several problems that application developers face. Microsoft does not provide an SMTP Gateway (yet) so the application is forced to connect directly to one hosted somewhere else, on another network. So to implement such functionality one of the possible option is using Free email providers. This might be fine for testing, but do you really want to rely on a free service in production? There can be other issues with this approach like if your chosen SMTP gateway is down or there are connection problems? Again there can be some specific requirement that, you want to send email via a company’s mail server, from inside their firewall. CloudMail solves these problems by providing a small client library that you can use in your solution to send emails from you application and a Windows Service that you run inside your companies network that acts as a relay. Because the send and relay are disconnected there are no lost emails and you can send from your own SMTP Gateway.   CloudMail is in its Beta version and available for download here.   Technorati Tags: Geeta,Azure Email,CloudMail

  Read the article

• XNA Shader Texture Memory

  - by Alex

  I was wondering about texture optimization in XNA 4.0. Will the the contentmanager send the texturedata to the GPU directly when the texture gets loaded or do I send the texture data to the GPU when I declare a texture in my shader. If that's the case, what happens if I have 5 shaders all using the same texture, does that mean that I send 5 instances of that texture data to the gpu or am I simply telling the GPU what preloaded texture to use? Or does XNA do the heavy lifting in the background?

  Read the article

• New Mac OS X Server setup, when i send mail to gmail it goes straight to Spam. Why is that?

  - by basilmir

  New Mac OS X Server setup, when i send mail to gmail it goes straight to Spam. Why is that? My setup: DNS - done (A records PTR are ok) Mail Setup - done Webmail - done Also there seems to be a naming problem. They all come from [email protected] instead of [email protected]. I must be missing an alias somewhere. I've read an entire book on setting this up so don't throw stones :) The GUI is masking a lot of this up for me, so explanations via GUI is appreciated.

  Read the article

• Observing flow control idle time in TCP

  - by user12820842

  Previously I described how to observe congestion control strategies during transmission, and here I talked about TCP's sliding window approach for handling flow control on the receive side. A neat trick would now be to put the pieces together and ask the following question - how often is TCP transmission blocked by congestion control (send-side flow control) versus a zero-sized send window (which is the receiver saying it cannot process any more data)? So in effect we are asking whether the size of the receive window of the peer or the congestion control strategy may be sub-optimal. The result of such a problem would be that we have TCP data that we could be transmitting but we are not, potentially effecting throughput. So flow control is in effect: when the congestion window is less than or equal to the amount of bytes outstanding on the connection. We can derive this from args[3]-tcps_snxt - args[3]-tcps_suna, i.e. the difference between the next sequence number to send and the lowest unacknowledged sequence number; and when the window in the TCP segment received is advertised as 0 We time from these events until we send new data (i.e. args[4]-tcp_seq = snxt value when window closes. Here's the script: #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::send / (args[3]-tcps_snxt - args[3]-tcps_suna) = args[3]-tcps_cwnd / { cwndclosed[args[1]-cs_cid] = timestamp; cwndsnxt[args[1]-cs_cid] = args[3]-tcps_snxt; @numclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } tcp:::send / cwndclosed[args[1]-cs_cid] && args[4]-tcp_seq = cwndsnxt[args[1]-cs_cid] / { @meantimeclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = avg(timestamp - cwndclosed[args[1]-cs_cid]); @stddevtimeclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = stddev(timestamp - cwndclosed[args[1]-cs_cid]); @numclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = count(); cwndclosed[args[1]-cs_cid] = 0; cwndsnxt[args[1]-cs_cid] = 0; } tcp:::receive / args[4]-tcp_window == 0 && (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { swndclosed[args[1]-cs_cid] = timestamp; swndsnxt[args[1]-cs_cid] = args[3]-tcps_snxt; @numclosed["swnd", args[2]-ip_saddr, args[4]-tcp_dport] = count(); } tcp:::send / swndclosed[args[1]-cs_cid] && args[4]-tcp_seq = swndsnxt[args[1]-cs_cid] / { @meantimeclosed["swnd", args[2]-ip_daddr, args[4]-tcp_sport] = avg(timestamp - swndclosed[args[1]-cs_cid]); @stddevtimeclosed["swnd", args[2]-ip_daddr, args[4]-tcp_sport] = stddev(timestamp - swndclosed[args[1]-cs_cid]); swndclosed[args[1]-cs_cid] = 0; swndsnxt[args[1]-cs_cid] = 0; } END { printf("%-6s %-20s %-8s %-25s %-8s %-8s\n", "Window", "Remote host", "Port", "TCP Avg WndClosed(ns)", "StdDev", "Num"); printa("%-6s %-20s %-8d %@-25d %@-8d %@-8d\n", @meantimeclosed, @stddevtimeclosed, @numclosed); } So this script will show us whether the peer's receive window size is preventing flow ("swnd" events) or whether congestion control is limiting flow ("cwnd" events). As an example I traced on a server with a large file transfer in progress via a webserver and with an active ssh connection running "find / -depth -print". Here is the output: ^C Window Remote host Port TCP Avg WndClosed(ns) StdDev Num cwnd 10.175.96.92 80 86064329 77311705 125 cwnd 10.175.96.92 22 122068522 151039669 81 So we see in this case, the congestion window closes 125 times for port 80 connections and 81 times for ssh. The average time the window is closed is 0.086sec for port 80 and 0.12sec for port 22. So if you wish to change congestion control algorithm in Oracle Solaris 11, a useful step may be to see if congestion really is an issue on your network. Scripts like the one posted above can help assess this, but it's worth reiterating that if congestion control is occuring, that's not necessarily a problem that needs fixing. Recall that congestion control is about controlling flow to prevent large-scale drops, so looking at congestion events in isolation doesn't tell us the whole story. For example, are we seeing more congestion events with one control algorithm, but more drops/retransmission with another? As always, it's best to start with measures of throughput and latency before arriving at a specific hypothesis such as "my congestion control algorithm is sub-optimal".

  Read the article

• Web app to manage subscriptions to online magazine

  - by Mulone

  I'm looking for a php web app, a Wordpress plugin, or an online web service (naturally as cheap as possible) to manage the subscriptions for an online magazine. These are the main features I need: register/open new subscription renew subscription pay online with credit card send automatic emails after registration auto-send reminder when subscription expires send bulk emails to all subscribers The magazine runs on Wordpress.

  Read the article

• How do I make my "volume up" more powerful in Win7?

  - by joon

  My volume up button raises the volume by 1%. Its also not a button, it's a weird 'touch' thing which is really really terrible. If I want to lower the volume, I have to awkwardly rub it for a while. If it were to decrease by 5% or 10% it would be a lot better. Can this be set somewhere in Windows/Keyboard settings? I got close to a solution with Autohotkey, where I could do this: a::Send {Volume_Up 5} which would send the volume up command five times, however when I assign it to the volume key, it forms an endless loop since the Send command sends Volume_Up and parses it at the same time. Update: I ended up with this script: $Volume_Up::VolumeUp() $Volume_Down::VolumeDown() VolumeUp( ) { Send {Volume_Up 6} SoundBeep, 750, 50 } VolumeDown( ) { Send {Volume_Down 6} SoundBeep, 750, 50 }

  Read the article

• How to match responses from a server with their corresponding requests? [closed]

  - by Deele

  There is a server that responds to requests on a socket. The client has functions to emit requests and functions to handle responses from the server. The problem is that the request sending function and the response handling function are two unrelated functions. Given a server response X, how can I know whether it's a response to request X or some other request Y? I would like to make a construct that would ensure that response X is definitely the answer to request X and also to make a function requestX() that returns response X and not some other response Y. This question is mostly about the general programming approach and not about any specific language construct. Preferably, though, the answer would involve Ruby, TCP sockets, and PHP. My code so far: require 'socket' class TheConnection def initialize(config) @config = config end def send(s) toConsole("--> #{s}") @conn.send "#{s}\n", 0 end def connect() # Connect to the server begin @conn = TCPSocket.open(@config['server'], @config['port']) rescue Interrupt rescue Exception => detail toConsole('Exception: ' + detail.message()) print detail.backtrace.join('\n') retry end end def getSpecificAnswer(input) send "GET #{input}" end def handle_server_input(s) case s.strip when /^Hello. (.*)$/i toConsole "[ Server says hello ]" send "Hello to you too! #{$1}" else toConsole(s) end end def main_loop() while true ready = select([@conn, $stdin], nil, nil, nil) next if !ready for s in ready[0] if s == $stdin then return if $stdin.eof s = $stdin.gets send s elsif s == @conn then return if @conn.eof s = @conn.gets handle_server_input(s) end end end end def toConsole(msg) t = Time.new puts t.strftime("[%H:%M:%S]") + ' ' + msg end end @config = Hash[ 'server'=>'test.server.com', 'port'=>'2020' ] $conn = TheConnection.new(@config) $conn.connect() $conn.getSpecificAnswer('itemsX') begin $conn.main_loop() rescue Interrupt rescue Exception => detail $conn.toConsole('Exception: ' + detail.message()) print detail.backtrace.join('\n') retry end

  Read the article

• BizTalk Orchestration & Port Tutorial Part 2

  - by bosuch

  In Part 1 I showed how to create and publish a simple Orchestration demo. Now we’ll finish configuring it in the admin console and test it. Open the BizTalk Server 2009 Administration Console, and expand BizTalk Server 2009 Administration, then Applications. You should have an entry for OrchestrationPortDemo – expand it as well. First, we’ll add the Receive Port – the place that we’ll drop the test file. Right-click on Receive Ports and select New One-way Receive Port. On the General tab, name it InputPort, then click over to Receive Locations.   Click New to add a new location. Your receive location can be FTP, SQL, WCF, SharePoint, or many other choices, but for this demo we’ll add a File location. Click the Configure button and set a receive folder (something like “C:\PortDemo\”) and a file mask (stick with “*.xml” for now) and click OK three times to create your Receive Port.   Next we’ll create the Send port – the location where BizTalk will drop the file. Right-click on Send Ports and choose New Static One-way Send Port. Give it an appropriate name, and configure the FILE Transport Properties as shown:   Click OK twice and your Send Port will be created. Now we’ll configure the Orchestration Bindings. Click on Orchestrations, then right-click the orchestration itself and select Properties. Select the Bindings tab. Choose BizTalkServerApplication as the host, and select the Send and Receive ports you previously created, as shown:   Now it’s time to fire everything up. Right-click on the send port you created and click Start. Once the Status column displays “Started”, click on Receive Locations and Enable the Receive Location previously created. Finally, start the Orchestration. Now, time to test! Create a simple xml file like: <root>    <Node1>Test</Node1>    <Node2>Test</Node2> </root> And drop it into the C:\PortDemo folder. After a couple of seconds the file should disappear – this indicates BizTalk has picked it up for processing. Look in the C:\PortDemo\Output folder and you should see an xml file with a GUID for a name, like {7C50104F-FC3E-4A49-B2FA-4F560A37636D}.xml. Open it to verify that it matches your input file. Practically, this demo doesn’t do a whole heck of a lot, but it shows you the basics for building, publishing and running an orchestration.

  Read the article

• Which browsers handle `Content-Encoding: gzip` and which of them has any special requirements on encodinq quality?

  - by user1049847

  I am creating a "hand made" HTTP 1/0, 1/1 server. I recently integrated zip lib so now I can stream encoded gziped data in and out. I wonder Which major browsers (alive ones - IE6-IE10, Chrome, FF, etc) send Accept-Encoding: deflate, gzip, ... and so can handle Content-Encoding: gzip today? Which of them send any quality expectations? Which of them can send encoded gziped post request and multypart/form data to my server?

  Read the article

• Want to Receive dynamic length data from a message queue in IPC?

  - by user1089679

  Here I have to send and receive dynamic data using a SysV message queue. so in structure filed i have dynamic memory allocation char * because its size may be varies. so how can i receive this type of message at receiver side. Please let me know how can i send dynamic length of data with message queue. I am getting problem in this i posted my code below. send.c /*filename : send.c *To compile : gcc send.c -o send */ #include <stdio.h> #include <stdlib.h> #include <errno.h> #include <string.h> #include <sys/types.h> #include <sys/ipc.h> #include <sys/msg.h> struct my_msgbuf { long mtype; char *mtext; }; int main(void) { struct my_msgbuf buf; int msqid; key_t key; static int count = 0; char temp[5]; int run = 1; if ((key = ftok("send.c", 'B')) == -1) { perror("ftok"); exit(1); } printf("send.c Key is = %d\n",key); if ((msqid = msgget(key, 0644 | IPC_CREAT)) == -1) { perror("msgget"); exit(1); } printf("Enter lines of text, ^D to quit:\n"); buf.mtype = 1; /* we don't really care in this case */ int ret = -1; while(run) { count++; buf.mtext = malloc(50); strcpy(buf.mtext,"Hi hello test message here"); snprintf(temp, sizeof (temp), "%d",count); strcat(buf.mtext,temp); int len = strlen(buf.mtext); /* ditch newline at end, if it exists */ if (buf.mtext[len-1] == '\n') buf.mtext[len-1] = '\0'; if (msgsnd(msqid, &buf, len+1, IPC_NOWAIT) == -1) /* +1 for '\0' */ perror("msgsnd"); if(count == 100) run = 0; usleep(1000000); } if (msgctl(msqid, IPC_RMID, NULL) == -1) { perror("msgctl"); exit(1); } return 0; } receive.c /* filename : receive.c * To compile : gcc receive.c -o receive */ #include <stdio.h> #include <stdlib.h> #include <errno.h> #include <sys/types.h> #include <sys/ipc.h> #include <sys/msg.h> struct my_msgbuf { long mtype; char *mtext; }; int main(void) { struct my_msgbuf buf; int msqid; key_t key; if ((key = ftok("send.c", 'B')) == -1) { /* same key as send.c */ perror("ftok"); exit(1); } if ((msqid = msgget(key, 0644)) == -1) { /* connect to the queue */ perror("msgget"); exit(1); } printf("test: ready to receive messages, captain.\n"); for(;;) { /* receive never quits! */ buf.mtext = malloc(50); if (msgrcv(msqid, &buf, 50, 0, 0) == -1) { perror("msgrcv"); exit(1); } printf("test: \"%s\"\n", buf.mtext); } return 0; }

  Read the article

• how to hide ssh expect user/password

  - by raindrop18

  my perl cgi script I have the password/user on clear text and want to hide it or the user enter the credential interactively.is that possible? here is my code. please any help!! i am very new for perl. #!/usr/local/bin/expect ####################################################################################################### # Input: It will handle two arguments -> a device and a show command. ####################################################################################################### # ######### Start of Script ###################### # #### Set up Timeouts - Debugging Variables log_user 0 set timeout 10 set userid "USER" set password "PASS" # ############## Get two arguments - (1) Device (2) Command to be executed set device [lindex $argv 0] set command [lindex $argv 1] spawn /usr/local/bin/ssh -l $userid $device match_max [expr 32 * 1024] expect { -re "RSA key fingerprint" {send "yes\r"} timeout {puts "Host is known"} } expect { -re "username: " {send "$userid\r"} -re "(P|p)assword: " {send "$password\r"} -re "Warning:" {send "$password\r"} -re "Connection refused" {puts "Host error -> $expect_out(buffer)";exit} -re "Connection closed" {puts "Host error -> $expect_out(buffer)";exit} -re "no address.*" {puts "Host error -> $expect_out(buffer)";exit} timeout {puts "Timeout error. Is device down or unreachable?? ssh_expect";exit} } expect { -re "\[#>]$" {send "term len 0\r"} timeout {puts "Error reading prompt -> $expect_out(buffer)";exit} } expect { -re "\[#>]$" {send "$command\r"} timeout {puts "Error reading prompt -> $expect_out(buffer)";exit} } expect -re "\[#>]$" set output $expect_out(buffer) send "exit\r" puts "$output\r\n"

  Read the article

• Is Stream.Write thread-safe?

  - by Mike Spross

  I'm working on a client/server library for a legacy RPC implementation and was running into issues where the client would sometimes hang when waiting to a receive a response message to an RPC request message. It turns out the real problem was in my message framing code (I wasn't handling message boundaries correctly when reading data off the underlying NetworkStream), but it also made me suspicious of the code I was using to send data across the network, specifically in the case where the RPC server sends a large amount of data to a client as the result of a client RPC request. My send code uses a BinaryWriter to write a complete "message" to the underlying NetworkStream. The RPC protocol also implements a heartbeat algorithm, where the RPC server sends out PING messages every 15 seconds. The pings are sent out by a separate thread, so, at least in theory, a ping can be sent while the server is in the middle of streaming a large response back to a client. Suppose I have a Send method as follows, where stream is a NetworkStream: public void Send(Message message) { //Write the message to a temporary stream so we can send it all-at-once MemoryStream tempStream = new MemoryStream(); message.WriteToStream(tempStream); //Write the serialized message to the stream. //The BinaryWriter is a little redundant in this //simplified example, but here because //the production code uses it. byte[] data = tempStream.ToArray(); BinaryWriter bw = new BinaryWriter(stream); bw.Write(data, 0, data.Length); bw.Flush(); } So the question I have is, is the call to bw.Write (and by implication the call to the underlying Stream's Write method) atomic? That is, if a lengthy Write is still in progress on the sending thread, and the heartbeat thread kicks in and sends a PING message, will that thread block until the original Write call finishes, or do I have to add explicit synchronization to the Send method to prevent the two Send calls from clobbering the stream?

  Read the article

• proxy software to relay email

  - by Registered User

  My some software applications need to relay emails to my email account. The only way they can do it via connecting to localhost which relays mail on behalf of application. I have forgotten the name of such a software it is a Debian/Ubuntu environment. Can any one let me know the name of such an proxy software which relays mail to your local SMTP server on behalf of application I will need to enter username password also in this setting because the mail server needs authentication.

  Read the article

• What do "Unknown SSAP" and "Unknown DSAP" mean in tcpdump?

  - by lacker

  While trying to fix a problem with intermittently losing internet connection on a machine with a wireless connection to a router, I ran tcpdump and noticed packets with "Unknown SSAP" and "Unknown DSAP" errors coming at a rate of a few per second. 20:27:21.703178 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 171 20:27:21.724726 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 104 20:27:21.746449 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe4 Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:21.970963 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe8 Information, send seq 0, rcv seq 16, Flags [Response], length 76 20:27:22.016565 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:22.038471 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 171 What does the "Unknown SSAP" and "Unknown DSAP" mean, and does it indicate a problem?

  Read the article

• Same domain only : smtp; 5.1.0 - Unknown address error 530-'SMTP authentication is required

  - by user124672

  I have a very strange problem after moving my netwave.be domain from WebHost4Life to Arvixe. I configured several email adresses, like [email protected] and [email protected]. For POP3 I can use mail.netwave.be, a mailserver hosted by Arvixe. However, for SMTP I have to use relay.skynet.be. Skynet (Belgacom) is one of the biggest internet providers in Belgium and blocks smtp requests to external mailservers. So for years I've been using relay.skynet.be to send my messages using [email protected] as the sender. The worked perfectly. After moving my domain to Arvixe, this is no longer the case. I can send emails to people, no problem. I have received emails too, so I suspect that's ok too. But I can't send emails from one user of my domain to another user. For example, if I send a mail from [email protected] to [email protected], relay.skynet.be picks up the mail just fine. A few seconds later, I get a 'Delivery Status Notification (Failure)' mail that contains: Reporting-MTA: dns; mailrelay012.isp.belgacom.be Final-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 (permanent failure) Remote-MTA: dns; [69.72.141.4] Diagnostic-Code: smtp; 5.1.0 - Unknown address error 530-'SMTP authentication is required.' (delivery attempts: 0) Like I said, this only seems to be the case when both the sender and recipient are adresses of a domain hosted by Arvixe. I have serveral accounts not related to Arvixe at all. I can use relay.skynet.be to send mail to [email protected] using these accounts. Likewise, I can use relay.skynet.be to send mail from [email protected] to these accounts. but not from one Arvixe account to another. I hope I have clearly outlined the problem and someone will be able to help me.

  Read the article

• What do "Unknown SSAP" and "Unknown DSAP" mean in tcpdump?

  - by lacker

  While trying to fix a problem with intermittently losing internet connection on a machine with a wireless connection to a router, I ran tcpdump and noticed packets with "Unknown SSAP" and "Unknown DSAP" errors coming at a rate of a few per second. 20:27:21.703178 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 171 20:27:21.724726 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 104 20:27:21.746449 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe4 Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:21.970963 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe8 Information, send seq 0, rcv seq 16, Flags [Response], length 76 20:27:22.016565 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:22.038471 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 171 What does the "Unknown SSAP" and "Unknown DSAP" mean, and does it indicate a problem?

  Read the article

• How to compress .pdfs in word 2007?

  - by chobo2

  Hi I am trying to send my cover letter and resume away but apparently it is too big to send through craigs list(my computer says the total size is 500kb) as it has a 600kb limit(so small should be at least a meg). Hi there. You recently tried to email Some job Email, an anonymous craigslist address. However, your message was too big to be sent through our system. Craigslist has a 600KB limit on the messages we'll send. Please reduce the size of your mail and try again. Thanks for using craigslist. So when I convert my word 2007(.docx) files to pdf they become huge. Like they got from 32kb to 320kb. So is there a way I can either get around craigslist limits or compress my pdfs a bit to make it happy. I don't want to send zips and stuff since the person who gets it might not even know what to do. I rather not send .docx since not sure if will have office 2007 or the compatibility view installed and I rather just send it as pdf(as some place require it anyways to be in pdfs). Thanks

  Read the article

• postfix takes 60-90ms to queue email -- normal?

  - by Jeff Atwood

  We're seeing some (maybe?) strange delays when submitting individual emails to our local Postfix server. To help diagnose the issue, I wrote a little test program which sends 5 emails: get smtp 1ms ( 1 ms) email 0 677ms (676 ms) email 1 802ms (125 ms) email 2 890ms ( 88 ms) email 3 973ms ( 83 ms) email 4 1088ms (115 ms) Discounting the handshaking in the first email, that's about 90ms per email. These timings have also been corroborated with another test app written by someone else using a different codepath, so it appears to be server related. I turned on detailed logging and I can see that the delay is between the end of message \r\n\r\n and the receive: [16:31:29.95] [SEND] \r\n.\r\n [16:31:30.05] [RECV] 250 2.0.0 Ok: queued as B128E1E063\r\n [16:31:30.08] [SEND] \r\n.\r\n [16:31:30.17] [RECV] 250 2.0.0 Ok: queued as 4A7DE1E06E\r\n [16:31:30.19] [SEND] \r\n.\r\n [16:31:30.27] [RECV] 250 2.0.0 Ok: queued as 68ACC1E072\r\n [16:31:30.28] [SEND] \r\n.\r\n [16:31:30.34] [RECV] 250 2.0.0 Ok: queued as 7EFFE1E079\r\n [16:31:30.39] [SEND] \r\n.\r\n [16:31:30.45] [RECV] 250 2.0.0 Ok: queued as 9793C1E07A\r\n The time intervals tell the story (discounting the handshaking required for the initial email) -- each email is waiting about 60-90 milliseconds for postfix to queue! This seems .. excessive .. to me. Is it "normal" for postfix to take 60-90 ms for every email you send it? Or do I just have unreasonable expectations? I would expect the local postfix server to queue the email in about 20ms, tops!

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >