Search Results

Search found 5878 results on 236 pages for 'sim card'.

Page 68/236 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

  • My computer freezes irregularly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • 3 Monitors powered from a Nvidia fx580

    - by user26067
    I have a NVidia FX580 card in a Dell Precision T1500. The outputs of the back of the card are DVI and 2x displayport. I tried to run 3 screens from the DVI + 2x displayport to dvi adaptors, but the card won't have it... It'll only run 2 of these screens at the same time. http://www.nvidia.com/object/product_quadro_fx_580_us.html says; **Display Support:** Dual Link DVI-I 1 DisplayPort 2 # of Digital Outputs 3 ( 2 out of 3 active at a time ) # of Analog Outputs 1 To me this reads that it will be able to power 2xdvi monitors and 1xvga monitor. Anyone care to confirm or speculate?

    Read the article

  • Assistance in setting up new APC Smart-UPS RT on a new VMware enviroment

    - by user38085
    I'm new to the realm of setting up a APC Smart-UPS RT 8000VA UPS with a management network card (AP9618). The project calls for the upgrade of the firmware for the network card to the newest and greatest. It also calls for the Powerchute Business Software to be installed with notifications setup per email for temperature, shutdown, and battery low. I know I'll have to use the serial cable to flash the firmware and install the software on one server 2003 box. Also on that server I'll have to install the software and setup the GUI (IP address) interface. Whats confusing the most is the whole process, and steps to use without taking down the network, which would be very bad. In flashing the firmware does it take down the UPS? Do i have to run BOOTP commands to setup the network card? Also no agents will be used on any of the VWware OS's and no SNMP trap will be used.

    Read the article

  • How to copy lots of files between two computers, without network?

    - by Steve Bennett
    I want to copy around 50Gb of files from my desktop to my work laptop. For some reason, the laptop won't connect to my home network. I haven't had any luck with a direct ethernet connection either, and I'm not willing to change any of the laptop's network configuration (last time I did that, I couldn't get onto the network at work, making me Not Very Popular). So...what else is there? The obvious route is copying via SD card. My largest card is 8Gb. But I can't find a good workflow. Is there a tool designed for this, where I could just repetitively move the card back and forth, without having to select files? I've tried using teracopy, but you end up missing a few files. I guess I could zip everything up into multi-volume .rars or something...but is there a more elegant way?

    Read the article

  • Setting up a wireless network with Verizon MiFi

    - by winarm
    I am trying to set up a home network. I live in a location without cable internet so I have a Verizon MiFi card. I have a few laptops at the moment and they each connect through the card but I want to set up an Ubuntu 10.10 server and see if I can use it for DHCP. I have a Trendnet TEG-S50G switch and the computer I plan to use for the server has a Linksys WMP-11 Wireless PCI card. Is there any other equipment I need in order to get this to work? Is this even doable? Is there a better way to make this happen?

    Read the article

  • Revocation status of DC can't be verified

    - by DotGeorge
    A Domain Controller within my forest was working fine (as the story usually goes). Then, suddenly, I can't logon with my smart card. Instead, I'm greeted with the following message: The system could not log you on. The revocation status of the domain controller certificate used for smart card authentication could not be determined. I literally have no idea what's happened here. As an attempted quick fix, I removed the root certificate which issued the Smart Card's certificate from the CA of both the client and DC. Then imported a newly exported one from the DC in question. Same issue. I've spotted a number of related articles on Microsoft's forums and a HP support document. Each don't really shed much light as it's a generic error message apparently. Having said all of this, other smart cards (issued from other DCs) work fine. So I have no idea what's up with this one.

    Read the article

  • Core Audio sound driver has an error

    - by Raj More
    I have been using Virtual DJ on my machine. The setup is where I want audio to play over the headphones and use a USB sound card to play audio into my headphones so I can listen to music before I play it for everybody. However, the last time I tried, I got an error message saying "Error in the sound driver of Core Audio. Your sound card is probably not connected, or the settings are incorrect". If I use the headphone by themselves, the USB sound card by itself, or my speakers by themselves, they all work individually. How do I go about figuring out what's wrong here?

    Read the article

  • How to get AMD Catalyst working on Arch x86_64

    - by gh403
    I've got a Dell Inspiron 15R 7520 with AMD's hybrid "PowerXpress" graphics. The integrated graphics card is (if I understand it correctly) integrated with the i7-3612QM processor, and the discrete graphics card is a "Southern Islands" Radeon HD 7730M. The integrated graphics work perfectly under Arch. However, the discrete graphics don't. I have tried several different methods, and the one that seems to get me the farthest with the least effort is the AUR package catalyst-total-pxp. After installing, rebooting, and issuing the commands # aticonfig --initial # pxp_switch_catalyst amd # X X completely fails to start. The X log can be found here. I don't understand what is failing; potentially, it has something to do with the way my card is hooked up--I think it's muxless, but I really don't know. What is the matter here? Any help would be appreciated.

    Read the article

  • ifconfig return "unknown interface: no such device"

    - by xolstice
    I'm trying to install a Linux driver for my wireless network card (D-Link DWL-G510) on my Red Hat Linux 7.1 machine with a 2.4.37.9 kernel. I downloaded the serial monkey driver from the sourceforge site and was able to successfully compile the rt73 module and load it into the kernel. The problem now is that everytime I issue the command ifconfig wlan0 up it keeps returning with the following error message: wlan0: unknown interface: No such device. I'm at a loss as to what to do here. I specifed wlan0 as the alias for the rt73 module in the modules.conf and also tried to load the driver with the command modprobe rt73 ifname=wlan0 (this specifies the interface name according to the instructions packaged in the driver), but the error message still keeps coming up. Is there something else I need to do in Linux to configure the wlan0 part or is the module not recognizing the wireless network card? It would be quite strange if it is the later since all information from the Internet is indicating this is the linux driver I should be using for mentioned wireless card.

    Read the article

  • Two NIC cards with the same metric - Internet traffic going out the wrong one

    - by bvanderw
    I have two NIC cards in my computer - one is connected to our corporate network and the Internet, the other is connected to a private LAN through a Linksys WRT54G. Both cards use DHCP. This was never an issue with Windows XP, but with Windows Vista (and Windows 7) the metric for the 0.0.0.0 route is the same (20), and it appears that some network traffic that should go out my main network card are going out my secondary card instead. The solution to date is to delete the 0.0.0.0 route associated with the second NIC card, but I have to do this several times a day. Is there a better solution? --Bruce

    Read the article

  • cloning mac address of physical server converted into vmware server

    - by user24981
    We've recently converted a physical Windows Server 2003 into vmware using P2V. However, one of the pieces of software on the 2003 machine are still looking for the old server's network MAC address in order to run. I've read several articles where it's discussed that you can modify the last part of the generated address and set it to static, but I need to clone the whole mac address to mimic the one in the old server. We're running CentOS and VMware server 2.0 as the host system. I was told that maybe adding in a second network card in the host and setting the virtual system's nic to that card instead of "bridged" would allow me to edit the vmx file and clone the whole MAC address. I can't use the old network card from the physical server because it's ISA and our new bus is PCI Any ideas? Thanks, Mike

    Read the article

  • How to set up RAID 1 on Dell PERC S300 With Existing OS Install

    - by Daniel Dugger
    We have a server that is being used in production, but it was not originally meant to. The main thing I want to add to it is a Dell PERC S300 RAID Card to have the main hard drive (Windows Server 2008 R2) mirrored on another hard drive. I can not initialize the disk and wipe the the OS to create the array and then re-install. Is there a way to create the array with a current hard drive, without affecting it, and just mirroring the drive? If that card is not an option, is there a card that would allow that? The server is a Dell PowerEdge T110 II.

    Read the article

  • Programmatically get the WLAN config of a machine and use netsh to setup new profile

    - by Maestro1024
    How can I programmatically get the wireless LAN configuration of a machine and use netsh to setup new profile? I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How can I get my SSID set and connected for the card?

    Read the article

  • GTA 4 crashes (WIN7 64-bit)

    - by Damian
    Hi! I got those two errors when I'm trying to run GTA4: Opis: Critical runtime problem Podpis problemu: Nazwa zdarzenia problemu: APPLICATION CRASH System RAM: -1 Available RAM: -532590592 Number of CPUs: 4 Video Card Manufacturer: NVIDIA Video Card Description: NVIDIA GeForce 9800 GT Video Card Driver Version: 8.17.0012.5919 Wersja systemu operacyjnego: 6.1.7600.2.0.0.256.1 Identyfikator ustawien regionalnych: 1045 And the second error: Podpis problemu: Nazwa zdarzenia problemu: BEX Nazwa aplikacji: GTAIV.exe Wersja aplikacji: 1.0.7.0 Sygnatura czasowa aplikacji: 4bd9efbe Nazwa modulu z bledem: StackHash_fea7 Wersja modulu z bledem: 0.0.0.0 Sygnatura czasowa modulu z bledem: 00000000 Przesuniecie wyjatku: 0000b513 Kod wyjatku: c0000005 Dane wyjatku: 00000008 Wersja systemu operacyjnego: 6.1.7600.2.0.0.256.1 Identyfikator ustawien regionalnych: 1045 Dodatkowe informacje 1: fea7 Dodatkowe informacje 2: fea78afc140967119290cc27385e0510 Dodatkowe informacje 3: 20ce Dodatkowe informacje 4: 20ce3e492a2aa7e5b8cfe9b7b1f05b42 My PC spec: Proc: Intel i5 (4x2,66ghz) ;RAM: 8GB DDR3 1066mhz ;Graphics: ASUS EN9800GT/DI/1GD3 ;OS: WINDOWS 7 64-bit I think it should work well on my PC, I couldn't find the solution to get it working so I hope You can help me. P.S. Sorry for my English - I'm from Poland.

    Read the article

  • Smartcards for storing gpg/ssh keys (Linux) - what do I need?

    - by Ninefingers
    Hi All, I'm interested in storing my SSH keys and gpg keys on a smartcard for added security. However, I'm a bit uncertain on a few points, which are as follows: How many keys can I get on a card? I assume both SSH and GPG can store keys on the card. Is there a limit to key size? I see a lot of cards saying they support 2048-bit keys, what about larger sizes? Hardware: can anyone recommend a card/reader combination that works well? I've done a fair amount of research and it seems PC/SC readers can be a bit iffy - is this your experience? Have I missed anything I should be asking? Are there any other hurdles? I'm aware fsf europe give away cards with membership - I'm not sure I want to join, but... are these cards any good?

    Read the article

  • Which driver for "ATI Mobility Radeon HD 3650" in a laptop?

    - by Lasse V. Karlsen
    We have some HP laptops here that comes equipped with a video card that identifies itself as "ATI Mobility Radeon HD 3650", like this one. However, which drivers do we choose? As far as we can tell, HD 3650 is desktop cards, or at least there are no drivers listed for that series with "Mobility" in their name. If I pick the following on the ATI Driver Download page: Graphics Windows Vista 32-bit Edition Mobility Radeon Then the dropdown for the card model contains X300, X600, X700, X800, X1300, X1400, X1600, X1800, 9600, 9700 and 9800 models, but no "HD" nor "36xx series". However, if I change to just "Radeon" for the last selection there, I can find a "Radeon HD 3600 Series" model in the list. Also, if I pick "Windows 7" as the operating system, I can find a "Mobility Radeon HD 3000 series" card, but no 3600. So, which one to pick? The main reason I ask is that they all seem to have some kind of problem installing, so neither seems to be the right one (they all crash with "Catalyst Install Manager has stopped working".)

    Read the article

  • 5v PCI to PCI-X or PCIe adapter?

    - by SiegeX
    We unfortunately have a very expensive ($10K) full-length 5 volt PCI card that we would like to use in the same system as another expensive PCI-X card. As luck would have it, it seems that PCI-X is not backwards compatible with 5v PCI cards. It would be a real shame to have to order a whole new server just to accommodate these two cards together. Does there exist any internal converter/adapter that will allow one to place a full-length 5v PCI card into either a PCI-X or PCIe slot? I've found an external expansion box that suits our needs but it's 1) External and 2) $1100. The only internal adapters I've been able to find go from Low-profile PCI - PCIe; nothing that seems to support full-height, full-length PCI cards.

    Read the article

  • Building a DVR system for use with custom windows application (video analytics)

    - by Michael
    Is there a good PCIe DVR capture card that has at least 4 channels as well as the hardware encoding? It would have to have decent driver support in Windows xp or windows 7. I have looked at various video capture cards as well as an integrated video capture card/motherboard from Huperlabs. But so far I have not found one with a decent review and that has good driver support that I can verify. A really small card would be nice because I am trying to get a fairly small form factor. Huperlabs stuff is pretty awesome but they are slow to get back to me and they bundle their analytics software with the hardware (extra cost for nothing) The dvr is being used for security.

    Read the article

  • Display won't come back from power saver mode

    - by tynor
    I wan't sure where exactly to post this question, but this one seemed the most relevant. I have a Dell LCD monitor running off a Dell Inspiron 531 tower with an Nvidia GeForce 8600 GT video card. Just recently, when I turn my computer on, the display immediately enters its "Power Saver" mode, and never wakes up. This problem doesn't occur with other computers, or even with this same computer when I use the integrated graphics. I have no other displays to test the card on. I have also tried replacing the power supply (my original one, which ran that video card for 4 years, was 300w, and I replaced it with 500w). Is there anything else I can try to troubleshoot this issue?

    Read the article

  • CPU I/O communication part 2

    - by b-gen-jack-o-neill
    Hi, I was suggested when I have some further questions on my older ones, to create newer Question and reffer to old one. So, this is the original question: CPU I/O communication OK, I have just 2 more questions. 1, How is MMIO set? I mean, lets say I have developed some extension card with PCI interface. How do you say to memory controller to redirect desired memory space to my card´s RAM? I mean, I think standart text-mode VGA MMIO adress is 0x8000. Is this HW set (every motherboard automatically redirects 0x8000 adress to PCI-E) or its just standart and can be changed (VGA says to motherboard: give me memory mapped IO at 0x8000) 2, Can one expansion card have more MMIO connections? I mean, lets say I have card with 10 Bytes of RAM. Can Bytes 0-4 be mapped to 0x0 and bytes 5-9 to 0x5000? Please, if you know about some good article about this, please post link. Thanks.

    Read the article

  • Are mobo raid controllers based on Intel ICH10R southbridge still considered software Raid?

    - by Breadtruck
    So do you still need specific software/drivers (intel matrix?) installed to manage the raid controller, setup the array. If the raid chipset is on-board the motherboard and it uses the CPU, and say I am using a Core 2 Quad Q9550, would a hardware based card still out perform the motherboard chipset? This is for a home workstation and I could spend $300 on a areca ARC-1210 PCI-Express x8 SATA II but I want to be able to justify the money for the raid card. My motherboard is a GIGABYTE GA-EP45-UD3P UPDATE: I was going to RAID5 using 4 500 GB drives, and I was going to buy a controller card but this article got me thinking hmmm....Toms-Southbridge Battle

    Read the article

  • Why are my USB 2.0 devices hanging Windows XP?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a DFI CM33-TL/G ATX (identified using SiSoft Sandra) motherboard hosting an Intel Celeron 1.3GHz CPU, 768Mb PC133 SDRAM, a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board based on the NEC uPD720102 chipset containing 3 external and 1 internal USB sockets. It's also hosting a 1.44Mb floppy drive on FDD0, a new 80Gb Western Digital hard drive running as master on IDE0 and a Panasonic DVD+/-RW running as master on IDE1. All this is sitting in a slimline case running off a Macron Power MPT-135 135W Flex power supply. The motherboard is running a version of Award BIOS 05/24/2002-601T-686B-6A6LID4AC-00. Could this be updated? If so, from where? I've raked through the manufacturer's website but can't find any hint of downloads for either drivers or BIOS updates. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

    Read the article

  • Gigabyte Motherboard + Adaptec RAID = No Booting from any drives

    - by Farseeker
    I have a brand new PC, just out of the box. It has a Gigabyte GA-P55-USB3 motherboard. I also have an Adaptec ASR-2504 SAS RAID card with 2x 15k Seagate Barracuda SAS drives attached. After the motherboard init's its on-board RAID it then init's the Adaptec RAID. It detects all the RAID devices OK, but when it gets to Loading Operating System... (i.e. right before it should load the OS) it just sits there forever, doing nothing: If I force it to boot from the optical drive, you see it spin up for a few seconds then die down again. If I remove the Adaptec RAID card, everything works perfectly. As soon as it's plugged back in, it never gets past that stage. The RAID card should be perfectly fine (it was before), but I have raised a case with Adaptec anyway. Any suggestions on what I can try to get these two to play nicely together?

    Read the article

  • GTA 4 crashes while trying to run it

    - by Damian
    Hi! I got those two errors when I'm trying to run GTA4: Description: Critical runtime problem Problem signature: Event Name Problem: APPLICATION CRASH System RAM: -1 Available RAM: -532590592 Number of CPUs: 4 Video Card Manufacturer: NVIDIA Video Card Description: NVIDIA GeForce 9800 GT Video Card Driver Version: 8.17.0012.5919 Version system OS: 6.1.7600.2.0.0.256.1 ID settings Regional: 1045 And the second error: Problem signature: Event Name Problem: BEX Name Application: GTAIV.exe Version Application: 1.0.7.0 Timestamp Application: 4bd9efbe Module Name error: StackHash_fea7 Module Version with the error: 0.0.0.0 Timestamp module with error: 00000000 Exception Offset: 0000b513 Code exception: c0000005 Data exception: 00000008 System Version OS: 6.1.7600.2.0.0.256.1 ID settings Regional: 1045 Additional Information 1: fea7 Additional information 2: fea78afc140967119290cc27385e0510 Additional Information 3: 20ce Additional Information 4: 20ce3e492a2aa7e5b8cfe9b7b1f05b42 My PC spec: Proc: Intel i5 (4x2,66ghz) RAM: 8GB DDR3 1066mhz Graphics: ASUS EN9800GT/DI/1GD3 OS: WINDOWS 7 64-bit I think it should work well on my PC, I couldn't find the solution to get it working so I hope You can help me. P.S. Sorry for my English - I'm from Poland.

    Read the article

  • Multi serial devices on one port

    - by adopilot
    I am developing one software for managing parking lot. System is designed to use four HID RFID devices for authorization clients on gates. Each device should be connected to server by Serial port RS232. Now I wondering is there some device or method to join all that devices on one device and after that to I have only one RS232 cable connected to server. My problem is in that RFID card readers are simple (stupid) devices and there I am not able to change anything, but Ill like to know from which specific device is coming input. What Ill want to do with that new device which need to join four readers is to add suffix or prefix to string that sent from RFID card reader. So I can identify device that is sending card number to my server. I am developing my system on Win platforms.

    Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >