Search Results

Search found 20016 results on 801 pages for 'download manager'.

Page 680/801 | < Previous Page | 676 677 678 679 680 681 682 683 684 685 686 687  | Next Page >

  • Different external ip addresses from different sites

    - by user630286
    My router is ClearOS 6(Centos 6). In my router, I have two external (internet) network connections from two ISP's. The primary connection is eth2 connected to a cable modem and the second one is ppp0 connected to a dsl modem. I have assigned eth2 as the primary connection (with a high metric value). In fact this is done through clearos's multiwan web interface. I have a test in my Nagios to monitor whether the primary connection. This connection is done based on the result of curl ifconfig.me But it seems that ifconfig.me is always giving the ip address of my secondary connection. I tested it through a browser. Yes ifconfig.me gives the secondary internet's(ppp0) ip address. But whatismyipaddress.[com|org] give my primary ip address (eth2). I checked the default route on the router through ip route list 0/0 which also shows the primary connection (eth2) as the default route. The traceroute www.google.com and traceroute ifconfig.me both seems to trace through the primary connection (eth2). As our secondary internet connection has only got a limited download, I don't want to end up having to pay a large sum at the end of the month. Has somebody got an idea why the ifconfig.me shows my secondary address? What is the best way to ensure that my router(and thus the lan) use the right internet connection.

    Read the article

  • Windows thinks outgoing connections are incoming connections?

    - by Slayer537
    I have a rather weird issue.. I'm trying to configure Windows Firewall to block all outgoing connections to a certain app, but allow all incoming. This app is used to transfer files across a network. The reason for this type of setup is to only allow certain users (IP Address) access to the files I have, but to still allow others to see what's available. Since Windows Firewall defaults to allowing all outgoing connections, I made a rule to deny all outgoing connections that were not in the IP ranges I specified. For the incoming connections, I'd like to leave it at allow all, but at the moment it is set to only allow the connections that also have outgoing permissions set. If I blanket say allow all incoming connections, I observe that unauthorized IP Address are able to actually download files, even though their IP was blocked in the outgoing connections. To shed a little more visibility on this, I used NetLimiter to see what was going on. NetLimiter showed me that the connection was an incoming connection. Shouldn't this be an outgoing connection, as I am uploading files to them, not the other way around? Is there a way to make the connection type be correct and show up as outgoing instead of incoming?

    Read the article

  • All of the NTFS hard links damaged, where are hardlinks stored and how to recover them?

    - by String Xu
    This is Windows 7 x64 sp1 on a NTFS file system. All hardlinks within C:\Windows\System32 folder disappear, and the Windows can't boot, because even the osloader, C:\Windows\System32\boot\Winload.exe also disappeared. Nevertheless, the original files are still located in the corresponding C:\Windows\winsxs folders. After booting into the Recovery Environment, and copied one Winload.exe (x64) from other folder, Windows gave an error pointing out that "ntoskrnl.exe is corrupted or missing...its file digital signature cannot be verified" In trying to boot in Safe Mode, the message above was shown after a screen prompting "Loaded \Windows\system32\config\system" Because at this early booting stage, smss.exe was still not loaded, so there is not any dumping and logs. Based on my study, ntoskrnl.exe depends on the following files: C:\windows\system32\PSHED.DLL C:\Windows\System32\hal.dll C:\Windows\System32\kdcom.dll C:\Windows\System32\clfs.sys C:\Windows\System32\ci.dll All those files above are copied from their corresponding folders and verified their md5 with a well-operating Windows 7 x64 SP1. But the booting error is still the same: "ntoskrnl.exe is corrupted or missing..." Background: 1. Before the reboot, there was an windows update going on. Then something unknown happen, almost all processes were broken to run, including the windows task manager, taskmgr.exe. After mount the hard disk to other computer, it seems that all hardlinks within C:\Windows\System32 folder were gone. I tried several data recovery software, but they are not be able to find those disappeared NTFS hard links. So the question is: Where are information about those hard links stored? And how to recover them? Are they depend on some windows service or stored in the registry?

    Read the article

  • How to verify system using right GPU, after system reset [duplicate]

    - by Antoros
    This question already has an answer here: Is my mobile AMD card being used? 2 answers OS: Windows 8 CPU: Intel® Core™ i7 Processor 3635QM GPU 1 : Intel HD Graphics 4000 GPU 2 : AMD Radeon™ HD 8870M other info: System Spects Problem: im unsure that CCC is using AMD card instead of Intel's, i have encountered several issues since updating to 8.1 and i don't know what to do What happened: Installed 8.1 patch first day After 1 minute of use, BBSOD, windows never loaded again System restore wouldnt recognize 8.0 restore points i did a system reset to windows 8 since the laptop was only 3 weeks old System Broke, it did restore to factory BUT kept the registry almost intact, i had to install almost everything again, since the factory drivers where working with the updated one's registry and several problems CCC Broke too <- What i've already done Installing new drivers on top of old ones didnt work, so i used AMD uninstaller first Uninstalled and Re-installed Intel's HD Graphics Driver Tried to install mobile center, but AMD told me that it wasnt compatible (even if thats the only driver that they provide via their page as seen Here) Tried to use Auto-Detect, couldnt install driver because card was disabled because it didnt have the drivers... (see what they did here?) Had to use a workaround with Samsung Update, the driver didnt appear as download so had to use search and downloaded the driver manually. Now the graphic card appears on device manager and catalyst but as 8800 series (not exact model), and cant check the card with neither dxdiag/GPU-z/HWMonitor when right-clicking on CCC only Intel card appears launching a game and using as "high performance" would speed it up a little but i cant be sure How to verify its working properly? HWMonitor wont show AMD card even when set to high performance Latest GPU-Z wont work because a problem with Intel's, and legacy ones wont either what can I do now? I don't even know if I fixed my problem or not, and i also want to to use Adobe Premier with it, and its locked (the option to run it with the amd card not intels) Edit: now it seems to work, but cant change the setting for adobe Premiere and other programs that i Need to

    Read the article

  • How to make a Windows Vista boot / recovery cd from a running system without using an original CD / DVD

    - by Giorgio
    I have just repaired a friends computer (replaced motherboard) and now I am trying to repair the Windows (Windows Vista) partitions. Unfortunately, probably due to the fact that he tried to start it several times after the old motherboard had stopped working (no signal on video) now the partition table or the file systems (or both?) appear to be damaged. I managed to boot Windows a couple of times but could not complete the boot. I tried to repair the partition table and file systems using Linux RIP (booting from USB stick) but the Linux utilities say that the file system is damaged and I should run chkdsk /f from Windows. So I now need a Windows boot CD from which I can boot and run chkdsk or any other Windows utilities that can repair the file system. Is there an easy way to create such a CD? Or can I download it for free somewhere? All the links to Windows Vista boot / repair CD's I have found on the internet refer to non-free stuff. Any hint? EDIT I have a working laptop with Windows Vista installed. So one solution would be to make a bootable CD or USB from it so that I can boot the desktop and run the repair utilities. However, I do not have the Windows Vista installation DVD, because both computers were bought with Windows pre-installed.

    Read the article

  • Codecs, Premiere Pro & Quicktime: Import or Play Error

    - by Nchpmn
    Original Question I've been using a FS-H200 (not the Pro variant) recorder with a JVC ProHD camera. I have been shooting with the DTE FORMAT to Quicktime (.mov). I copied the files to an external hard drive and am now trying to edit. The files will play back in VLC, as they would be expected to. However they will not import into Adobe Premiere CS5.5, instead giving an error: Unsupported format or damaged file. Quicktime gives the following error when attempting to play the files: Error -2002: a bad public movie atom was found in the movie (Filename) To try and fix this, I have installed the following codec packs: K-Lite Codec Pack 64-bit Full (version 5.9, latest) K-Lite Codec Pack 32-bit Full (version 8.4, latest) MainConcept Codec Suite (Broadcast) v5.1 for Adobe CS5 Reinstalled Quicktime with new download from Apple The same errors and problems still exist. From this I can assume that there is an issue with Quicktime and that is what Premiere is using as an encoder/decoder for the codec. Is there any way to fix this? From looking at the "Codec Information" from VLC: Stream 0 Type: Video Codec: MPEG-1/2 (mpgv) Language: English Resolution: 1280 x 720 Frame Rate: 25 Stream 1 Type: Audio Codec: PCM S16 BE (twos) Language: English Channels: Stereo Sample Rate: 48000 Hz Bits per sample: 16 Other computer specs: Windows 7 Professional 64-bit (SP1) Gigabyte Z68X-UD3-B3 Intel i7-2600K 16GB DDR3 2TB WD 7200RPM SATA 6Gb/s LaCie d2 Quadra 2TB v3 7200RPM (External HDD) NVIDIA GeForce GTX 560 Ti Golden Sample Updates 2012-03-11 @ 2050 AEDT MPEG Steamclip doesn't recognise, play or convert the footage. File open error: unrecognised file type. [Open Anyway] File open error: can't find video or audio tracks. 2012-03-24 @ 1920 AEDT Had to transcode the footage. :(

    Read the article

  • MS Excel and Access - which is better for reports?

    - by Nat
    Where I work, staff have just started to use a basic table in excel (1 october) to record sales which has about 10 columns (name, client, renewed, discount, paid etc). I record the data (total sold etc) every hour and email it to the manager. Each staff has the their own file on the network which they use constantly for that day (eg. John 08-10.xlsx; John 09-10.xlsx etc) and have been told to save the file after they complete a row with client data. I can see the file (in read only mode) to update the report but I am sure there must be a way of doing an autoupdate of their worksheets in real time. I can link worksheets and workbooks to my main workbook but manually. Does anyone have suggestions on have to do this on Excel? Or would Access allow me to make a report which shows the sales total for that hour without the staff closing the file or constantly clicking save every few minutes? We use office 2010. thanks

    Read the article

  • Server not accepting uploads

    - by Tatu Ulmanen
    I'm having a strange problem with my VPS: I can download files from it, I can use PuTTy to connect to it and all behaves normally. But sometimes, when I try to upload a file to the server or save a file via SFTP, the connection inexplicably fails. I am using jEdit to edit files remotely via SFTP. When it works, it works fine. When it doesn't, I get an error message: Cannot save: java.io.IOException: inputstream is closed Cannot save: java.io.IOException: 4: I can see that a temporary save file (#file.php#save#) is created on the server with a filesize of 0. So the connection works, but when it comes to sending the actual data, something fails. The same thing with WinSCP, but the error is different: Copying file fatally failed. Copying files to remote side failed. And I can always browse the server with PuTTy without a problem. I see nothing abnormal in any log files. Auth.log shows this when I try to save: sshd[32638]: Accepted password for - from - port 62272 ssh2 sshd[32638]: pam_unix(sshd:session): session opened for user - by (uid=0) sshd[32640]: subsystem request for sftp sshd[32638]: pam_unix(sshd:session): session closed for user - When I wait for a while (say, an hour), everything works fine again. It can't be a temporary ban, as I am still allowed to connect to the server, right? I know this may not be enough info to solve the problem, but I am grateful for any clues or bits of information that might help me. What are the possible causes for this kind of behaviour, what log files can I check for clues etc.. I'm running out of ideas!

    Read the article

  • Macros in Excel 2010 hangs

    - by Ahmad
    I have a spreadsheet with several macros. Generally, when previously using Excel 2007, a user clicks a button and everything works as expected (calculations, some email sending & file I/O). Typically, the expected run-time is about 90 seconds. The spreadsheet is a xlsm file created with Excel 2007. With Excel 2010 however, the same user process results in a non-responsive excel and forces us to kill excel from the task manager. Some note that I have gathered so far in trying to debug this issue: When monitoring CPU usage, it seems that Excel does start the macro. CPU usage increases as expected to about 47% for a few seconds. Excel.exe than drops to 0% usage and I now have a non-responsive Excel (even after 1 hour). If I set debug break points across modules and different functions and step through the code (after clicking the button) , the process works as expected albeit much slower. To add, there were no exceptions. I am at a complete loss as to what the issue may be. I initially thought it may be the add in that is being used but that was debunked by point 2. This seems to be a very odd situation. I can provide more information if required, but I'm at wits end about the root cause could be. I need help in diagnosing and resolving this issue.

    Read the article

  • How To Monitor Home Wireless Network Connected Devices Bandwith

    - by GWLlosa
    (Originally posted on SuperUser, not sure if it might be better suited here) I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

    Read the article

  • Toshiba A205-5804 freezes when plugged in

    - by heron
    Well I have a Toshiba A205-5804 and the problem is that the screen freezes anytime I plug the pc into the external power supply, not as most of the computers having the same issue, my computer DOES freeze in safe mode, and I really can't bear this problem for much longer... It's not an overheating problem, the computer is not getting hot or anything related, I've already tried changing the AC adapter, booting only with AC and no battery, and also all of these suggestions: Try changing the following setting in the bios setup, under the 'Advanced' tab Dynamic CPU Frequency: Mode = Always Low (NOT DYNAMIC) My laptop has been running on AC power without a problem for 24hours, including many restarts, and when I went back to the original bios setting, the problem returned almost straight away. EDIT Other suggestions I found on the web from here and here: Set the power plan to high performance Set the power plan to "Minimal Power Management" (1 and 2 do conflict) Start - Control Panel - Device Manager -- Processor - disable one of two processors - reboot normally 4.Do this: Only plug battery into laptop Turn on the laptop and start Windows normally Plug AC adapter into laptop, the screen will freeze Leave the laptop the way it is for 12-24 hours After 12-24 hours, turn it off the hard way Once it is turned off, turn it back on. The laptop is working now. I have no idea of what can it be...

    Read the article

  • Sharing between Vista and Windows 7

    - by Metro Smurf
    Vista Ultimate 32 bit Windows 7 Ultimate 64 bit I've read through similar questions about sharing between Win7 and Vista, but none of them have resolved my issue of not being able to share between Win7 and Vista: Connecting to a Vista shared folder from Windows 7 Networking Windows 7 and Vista Enable File sharing in Windows Vista Previously I had previously had my Vista and XP system sharing back and forth without any problems. I was able to access the shares without entering a user name / password in the NT challenge prompt (note: account names and passwords were different on the Vista and XP systems). Currently I replaced my XP system with a Win7 system. Now, when I attempt to access shares to/from Vista / Win7, I am continually prompted with an NT challenge to enter my credentials. Things I've Verified/Tried Both systems are on the same workgroup. Win 7 is using the Home network. Vista is using the Private network. In other words, neither system is using a Public network profile. Enabled file sharing with and without password protection on both Vista and Win7 Tried HomeGroup Connections (win7) with Windows to manage connections and Use user accounts to connect. Reviewed too many online articles to count to trouble shoot. Set the shares to have full control by everyone. Set up the shares directly on the directory and through the share manager. My Question How can I enable file sharing between Vista and Win7 without being prompted with a username/password challenge, ever?

    Read the article

  • Why does Windows/Microsoft Updates always take such a long time to detect available updates?

    - by RLH
    It's a common task for many of us who work in any form of IT position using Windows. Eventually you have to install/re-install a version of Windows and what follows is a very long OS updating process. For a long time I have accepted the fact that this is a slow process and that's all there is to it. There is a lot to download, and some updates require restarts followed by further updates... Ugh! This morning I had to go through the process of installing Windows XP with SP3. I'm installing the OS on a VM on an SSD and I've been working on this thing for over 6 hours. Although, think there are many ways to knit-pick this process for improvements, there is one step that is always particularly slow and I can not figure out a good reason why. That step is the detection step on a manual update. Specifically, when navigate to the Windows (or Microsoft) Updates page, and then click the 'Custom' button to detect your updates. It appears that your PC just sits there for a painful amount of time. Check your Task Manager and it looks like your PC is, in fact, locked because your CPU isn't cooking but that's certainly not the case. Somethings happening but I have no clue what's going on? What is the updating software doing? If the registry was being searched, shouldn't my CPU usage peak? Does anybody know what's happening? I can loosely justify why some of the steps in the update process take so long. However, this one doesn't seem to have any reasoning.

    Read the article

  • Installing Windows 7 from a USB Hard Drive.

    - by Mark Tomlin
    I have a Western Digital Passport External Hard Drive (320GB) that I want to partition to keep the data on, but use some of the free space to install Windows 7 onto my desktop computer. Microsoft has given me the Windows 7 Enterprise Edition ISO to download. I would like to take the External HD and partition it so I can fit the ISO image onto it. How would I go about doing this? Trying to use GParted to partition the external hard drive has caused a chicken or the egg problem. GParted can't see the drive unless it's mounted, and when it is mounted it will not allow me to do anything to the partition. When it's not mounted, GParted can't see the drive at all and as such can't do anything to the drive. Once the drive is correctly partition, how do I go about moving the ISO image Microsoft gave me to my USB External Hard Drive? Are there any special steps that I need to take? I am using Ubuntu 11.04 & GParted 0.7.0, on my Chromebook to do this. Any support would be appreciated.

    Read the article

  • no administrator password for Windows 7

    - by huskergirl78
    I'm a secretary and my boss set up my new Windows 7 OptiPlex 7010 (Dell) computer for me while I was on vacation (he does not remember setting any "administrator" password). We are a small office so there is no system password set, either. I've used it for 6 months, all the while I couldn't access network drives, etc., without an administrator password. It was annoying, but I could still get my work done. Finally, on a slow day I took it upon myself to "fix" the problem, and in all my infinite wisdom, I managed to change my user account from administrator to standard user, so now I really can't do anything. I can't download or install any programs, move or rename files, etc. I tried the Dell suggested solution, but the BIOS tells me there is no password set, so it has to be a Windows 7 problem. All the solutions I have come across require an administrator password to let me do them. What can I do to find out the admin password so I can use my own darn computer!? Is there a default admin password?

    Read the article

  • How to implement a virtual server running Ubuntu inside a fileserver in windows?

    - by user541445
    I work in a company that has some limitations regarding their budget. They need client/server aplication. I can code the aplication, I've made mini tests on primordial applications that work. The thing is that they only have fileservers, and the application they need must be concurrent compliant, so the database must be in their local network (Fileserver is the only choice). So far, I have explored almost any option available, starting with: Desktop databases. Access (We have a license)(But concurreny is just not effective, besides it's a windows software, yuck). Sqlite (Nice, but since the information they manage is a lot, I've performed some concurrency tests with INSERTs and doing SELECTS at the same time). It fails, somehow it just stops inserting. Open office Base (I dismember a base office only to see that it was a file mode HSQLDB). I've tried, not concurrent at all. Etc (You name the Open source Desktop Database manager, and yes, I've tried that one.) Server databases Call me a stubborn person, but reading some server databases documentation say that their databases will work in a file mode. I've tried a lot of products. Postgres, MySQL, FireBird, H2, Derby, Oracle Express, IBM DB2 Express, etc. So, I really need a hand here, I've been doing this install/delete/depression thing with a lot of databases for 3 weeks, until I got with a crazy idea and I just came here to express it. So, my question comes down to this: Installing a light virtual OS software like Virtual PC and then installing in there a Server OS like an Ubuntu server inside that virtual software will work? Will it work 24/7 or when I close the virtual pc software? Will this work in a fileserver? Any suggestion, answer, critic to the place I work, crazy new concurrent database that will work in fileserver will be most than welcome.

    Read the article

  • Very Slow DSL (ethernet) speed [New Interesting Update]

    - by Abhijit
    Very IMPORTANT and INTERESTING UPDATE: Due to some reason I just thought to do a complete new setup and this time I decided to again have openSUSE plus ubuntu. So I first reinstall lubuntu and then I installed OpenSUSE 12.2 (64 bit). Now, my DSL speed is working very normal and fine on opensuse. So this is very scary. Is it possible for any operating system to manipulate my NIC so that it will work fine only on that operating system and not on another os? Regarding positive thinking and not being paranoid, what is it that makes ONLY suse to get my NIC to work at normal speed but ubuntu can not do it? Not even fedora? Not even linux mint? What all these OS are lacking that enables suse to work great? == ORIGINAL QUESTION == I 'was' on opensuse 12.2 when my dsl speed was normal. Yesterday I switched from opensuse to ubuntu 12.04 and speed decreased. It came to range of 7-10-13-20-25-kbps. Then I switch to linux mint, and then to fedora. Still slow speed. When I was in ubuntu I disabled ipv6 but still no luck. Now I am in fedora but this time with DIFFERENT ISP. And still I am getting very slow sped. So my guess is this is nothing to do with os. What can be wrong? Is this problem of NIC? Does NIC speed decreases over time? Does NIC life ends over time as with keyboard or mouse? Help please All the os I used are 64 bit and my laptop is Compaq Presario A965Tu Intel Centrino DUal Core. Interesting thing to notice is I get normal speed while downloading torrent inside torrent client softwares. This slow speed issue applied to download from any web browser or installing software using terminal.

    Read the article

  • I need a driver for my Cardbus USB 2.0 card

    - by Carl
    The picture and details of the card are here: http://www.ht-link.com/en/ProductView.asp?ID=106 The Windows drivers for this don't work right. I tried them on my previous laptop, and then installed the ones off their included CD. (Note that the systems requirements includes a CD-ROM drive...) I have a new laptop, and lost the CD. The website that lists the drivers is broken - the download links don't work. It is here: http://www.ht-link.com/en/DownView.asp?ID=10 I need the very first link - The Win XP drivers for the HT-112NEC. The company does not reply to my e-mails. I've tried searching Google for other sources for the driver (I didn't bother with those sites that want me to install driver detection software or create a log-in for their site). [Here's the problem I am getting using the drivers Windows XP SP3 installs: When I plug in my USB 2.0 hard-disk adapter, a USB Mass Storage Device entry is added in the Device Manager, but there is no entry under Disk Drives, and a drive letter is not assigned, so I can't access the driver. Like I said, this card didn't work without their special drivers on my other laptop, either.]

    Read the article

  • How do I recover drivers from other hard disk

    - by Carl
    The drivers for a Cardbus (PCMCIA) card that gives me 2 USB 2.0 ports are on the hard disk from my old laptop. I have lost the driver CD. I have a way to get files from that other hard disk. Which files do I need? The drivers for the card used to be on the following website - the information is still there, except the download links don't work: http://www.ht-link.com/en/DownView.asp?ID=10 - The drivers I need are the first listing - The Win XP drivers for the HT-112NEC. My e-mails to them have not been answered. The information on this card is here http://www.ht-link.com/en/ProductView.asp?ID=106 I already tried connecting that other drive to my new laptop (via USB) and adding the drive to the search criteria when selecting update driver in the Device Manager. It says there isn't a better match, and if I select manual the matching device is not listed. (I don't think "manual" sees drivers on the external hard disk - but only ones on the main drive and/or found listed in the registry.) I would try 'have disk' if I knew exactly what file to point to on the external drive. The drivers are on that hard disk - I installed them there, and used that card on that computer. The new laptop has Windows XP Pro SP3, the old one had Pro SP2 Thanks for any help.

    Read the article

  • Server side url scanner for malware, spyware , viruses and protect my visitors

    - by Vangel
    I have a forum/groups site that contains a lot of external URLs, sometimes direct download links. I want to protect my visitors from possible attacks from malware sites as they are mot likely to click on these links. CUrrently I implement DBL (spamhaus) but thats not enough. I want to run a background task to check the outgoing links first. I have looked at similar questions in StackOverflow (wrongly posted there) and here but fail to find a question same as mine or a good answer. People have suggested ClamAV , I don't believe it can detect Web hosted malware sites and its has a lot of missed detection. I have looked at google safe browsing service ( http://code.google.com/apis/safebrowsing/developers_guide_v2.html very complicated to implement or maintain plus midway I get lost :S ) I can go for commercial solution, anything to protect the visitors and my site brand. But I would like to hear the opinion of server admins and if anyone has implemented such a service. My Server is basic CentOS LAMP stack. thank you very much in advance.

    Read the article

  • Google Chrome is running my system out of memory

    - by jasondavis
    I am running Windows 7 x64 with 12GB of RAM I often have multiple windows and a ton of tabs open. I use the extension Session Buddy to restore all my windows and tabs once the memory gets too high. So my 12gb of ram will get up to around 93% used because of Chrome, now I can close chrome down and restore the same amount of windows and tabs and it will only use about 25% of memory, it then over time increases back up to the 90% zone after several hours. It seems that when I close tabs, instead of freeing that memory up, it doesn't so that is why the huge increase of memory usage as new tabs are opened and closed it just adds up, this sounds like a huge bug in chrome. Just for an example I just re-booted my system, I only have 1 window with 4 tabs open and in the task manager, it shows 29 chrome.exe processes I then killed all chrome processes and opened a chrome window with just 1 tab, it made 27 chrome.exe processes. Is this an issue that others have? More importantly, is there a fix? UPDATE I just read that each plugin and extension creates a chrome.exe process, I then couunted 24 extensions so that helps explain a portion of the large processes. Still not sure about memory not being freed up though!

    Read the article

  • HP EliteBook 8440P - USB ports stop working on docking station

    - by r0ca
    I have a HP Elitebook 8440P running Windows XP Pro SP3. I installed it on my docking station and everything went smooth for a while. Last week, my mouse and any other USB devices stoped working sudenly... It was working fine on my laptop itself but nothing on my docking station. LCD attached monitor works and same for LAN and PS2 keyboard. I updated the BIOS, Chipset, Video Drivers, also changed my docking station by a brand new one but the problem still comes back. I also noticed something in Device Manager... A Generic USB Root Hub has an error on it, a Yellow/Orange exclamation mark. I tried to update that driver but no luck. Windows is unable to process it. This seems to be the problem but can't fix it. I may only re-image my laptop but for me, I need to avoid that since I have so many apps installed on it. If anybody has any advice, I'll take it!

    Read the article

  • Equivalent of scp -l bandwidth_cap for .ssh/config?

    - by Mark Bennett
    Short form: You can limit the bandwidth the scp uses with the -l switch, you pass a number that's in kbits/sec. I'd rather set this in my .ssh/config file for certain names machines. What's the equivalent named setting for -l ? I haven't been able to find it. Followup question: Generally, not sure how to map back and forth between ssh command line options and config names, short of doing Google searches or manually comparing man pages on a case by case basis. Is there a table that directly equates the two? Longer form of first question, with context: I've started using ssh config quite a bit, especially now that I need to go through a proxy and do lots of port mappings. I even define the same machine more than once depending on what type of tunneling I need. However, when uploading a large file, it's difficult to do anything else on my machine. Even though I have more download bandwidth than up, I think that scp saturates the link so even my small requests can't reach the Internet. There's a fix for this, using the -l bandwidth command line switch for scp. scp -l 1000 bigfile.zip titan: I'd like to use this in my config instead, so I'd create an additional named entry called "titan-upload" and I'd use that as the target whenever I upload. So instead of: scp bigfile.zip titan: I'd say: scp bigfile.zip titan-upload Or even set different caps depending on where I am: scp bigfile.zip titan-upload-from-home vs. scp bigfile.zip titan-upload-from-work I'm generally on Mac and Linux.

    Read the article

  • How to setup RAID 1 with Intel RST on an existing Windows 7 system?

    - by instcode
    I'd like to setup RAID-1 using Intel Rapid Storage Technology on my Windows 7 64-bit system. I have an 1TB SATA HDD with Windows 7 system installed on the first primary partition (leftmost, ~200GB). The rest of this HDD is unallocated (~800GB). I bought another 2TB SATA, then created a primary partition (leftmost, ~500GB) and filled my data in. The rest of this HDD is unallocated (~1.5TB). A quick disk layout (XXX is the unallocated region): HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXXXXXXXX ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXXXXXXXX ] Now, I want to create a 500GB RAID-1 partition (I'm not sure if using "partition" is correct here) on the rightmost of the 2 HDDs above without losing any existing data from both disks. Here is the expected layout: HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXX | 500GB D:\ DATA - RAID-1 ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXX | 500GB D:\ DATA RAID-1] Let's not concern about data lost, is it possible to have that final layout using Intel RST? Previously, I tried this layout using dynamic disk & software RAID from Windows and it worked as expected, however, it's quite ugly in resynching after an OS failure that I don't want. If yes, is there a way to keep the data on existing partitions untouched or, at least, it should keep the SYSTEM partition safe (I'm okay if the PROGRAM partition has to be gone.)? Well, are there any strict/special steps I should follow when using the Intel RST manager in order to achieve that? If none of those questions above are "Yes", could you please suggest some other possible layouts that leave the C:SYSTEM partition untouched?

    Read the article

  • Writing xml with powershell

    - by alex
    i have a script that get all the info i need about my SharePoint farm : [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") > $null $farm = [Microsoft.SharePoint.Administration.SPFarm]::Local $websvcs = $farm.Services | where -FilterScript {$_.GetType() -eq [Microsoft.SharePoint.Administration.SPWebService]} $webapps = @() foreach ($websvc in $websvcs) { write-output "Web Applications" write-output "" foreach ($webapp in $websvc.WebApplications) { write-output "Webapp Name -->"$webapp.Name write-output "" write-output "Site Collections" write-output "" foreach ($site in $webapp.Sites) { write-output "Site URL --> -->" $site.URL write-output "" write-output "Websites" write-output "" foreach ($web in $site.AllWebs) { write-output "Web URL --> --> -->" $web.URL write-output "" write-output "Lists" write-output "" foreach ($list in $web.Lists) { write-output "List Title --> --> --> -->" $list.Title write-output "" } foreach ($group in $web.Groups) { write-output "Group Name --> --> --> -->" $group.Name write-output "" foreach ($user in $group.Users) { write-output "User Name --> --> --> -->" $user.Name write-output "" } } } } } } i want to make the output to an XML file and then connect the xml file to HTML and make a site of it for manager use how can i do it ? thanks for the help !

    Read the article

< Previous Page | 676 677 678 679 680 681 682 683 684 685 686 687  | Next Page >