Search Results

Search found 20140 results on 806 pages for 'remote management'.

Page 684/806 | < Previous Page | 680 681 682 683 684 685 686 687 688 689 690 691  | Next Page >

• Name resolution not working with ipv6 on centos

  - by jolivier

  I just installed CentOs 6.3 on a server to be installed in a data center, but cannot get name resolution / curl to work. I know this is because of it trying to use ipv6, since ping google.com works, curl -4 google.com works, but not curl google.com. I removed the ipv6 adress from the interface and it does not change anything. This is very problematic since most system tools like yum fail at name resolution currently. Browsers like Firefox work because they might be using another tool for name resolution than the one use by curl. I managed to fix this on workstations by completely disabling ipv6 following tutorials like this one / hardcoding name resolution in /etc/hosts. But since I am here configuring a server which will be later installed in a remote data center, I would like not to mess up, understand what is going on and fix it properly. Besides, I will face the same issue with more servers to come so I would really appreciate your help in understanding this problem and how to solve it. I would be happy to provide more information if needed to help understand what is going on. The current network configuration is a small enterprise network, with a DNS server (let's call it A) configured once a long time ago. dig google.com and dig -4 google.com are both refused by the A DNS. But this is also true for my workstation on which curl is working (and yes they both use the same A DNS server). Indeed this faulty server and my workstation have multiple nameservers in /etc/resolv.conf, and the second one is working fine for both of them, so if I remove A from my resolv.conf everything works fine! Regards, Olivier

  Read the article

• Listing group members using ldapsearch

  - by colemanm

  Our corporate LDAP directory is housed on a Snow Leopard Server Open Directory setup. I'm trying to use the ldapsearch tool to export an .ldif file to import into another external LDAP server to authenticate with externally; basically trying to be able to use the same credentials internally and externally. I've got ldapsearch working and giving me the contents and attributes of everything in the "Users" OU, and even filtering down to only the attributes I need: ldapsearch -xLLL -H ldap://server.domain.net / -b "cn=users,dc=server,dc=domain,dc=net" objectClass / uid uidNumber cn userPassword > directorycontents.ldif That gives me a list of users and properties that I can import to my remote OpenLDAP server. dn: uid=username1,cn=users,dc=server,dc=domain,dc=net objectClass: inetOrgPerson objectClass: posixAccount objectClass: organizationalPerson uidNumber: 1000 uid: username1 userPassword:: (hashedpassword) cn: username1 However, when I try the same query on an OD "group" instead of a "container," the results are something like this: dn: cn=groupname,cn=groups,dc=server,dc=domain,dc=net objectClass: posixGroup objectClass: apple-group objectClass: extensibleObject objectClass: top gidNumber: 1032 cn: groupname memberUid: username1 memberUid: username2 memberUid: username3 What I really want is a list of users from the top example filtered based on their group memberships, but it looks like membership is set from the Group side, rather than the user account side. There must be a way to filter this down and only export what I need, right?

  Read the article

• Hard drive not correctly recognized on a new Windows 7 installation, but works correctly on Windows XP

  - by david

  I'm having problems configuring a hard disk in a brand new, clean Windows 7 installation. System specs: Hard disk: WD VelociRaptor WD6000HLHX (600 GB, 10000 RPM) Motherboard: Gigabyte Z77X-UD3H BIOS SATA mode set to AHCI (not RAID), with disk connected to SATA0 (6 Gb/s port). Windows 7 Enterprise SP1 64-bit The disk is recognized by the BIOS and is correctly identified, with the name and size correctly reported. Windows recognizes the disk itself and reports the device is functioning correctly, but it doesn't appear in Explorer. Disk Management shows the drive, but incorrectly states that it is uninitialized and has no partitions. If I try to initialize the drive, I get an error saying that "the system cannot find the file specified" (what file?). Before connecting the drive to the new machine, I partitioned and formatted it under Windows XP SP2, creating 2 partitions (MBR, not GPT) and copying over a boatload of data. However, none of this data appears under Windows 7. If I put the disk back into the Windows XP machine, I can access the disk and all of its data. Is it possible to get Windows 7 to correctly recognize the disk without having to erase it and start over? If so, how do I do so? I checked this question, which seems to cover the same issue, but it didn't help.

  Read the article

• SSH login very slow on OS X Leopard

  - by acjohnson55

  My SSH sessions take a very long time to initiate. This applies for logins with and without passwords, interactive and non-interactive. I have tried setting 'GSSAPIAuthentication no' and 'IPQoS 0x00' on the client side, and 'UseDNS no' on the server side, but no dice. I'm really stumped and frustrated. The worst part is that it SFTP takes forever to establish connections too, making file transfer much longer than it would be otherwise. I thought the problem might be something with PAM, because of where the hang is in the sshd log below, so I tried commenting out each line one-by-one in the /etc/pam.d/sshd file. Some caused login to be impossible, some had no apparent effect. I can't really tell if PAM is stalling for other services, but I can say that su'ing into my account from another account with 'su -l' has no apparent delay. I tried creating a new user account, just to see if there was something wrong with my existing account, and the same problem persisted. Any ideas of what's going on? On the client side, the most verbose mode outputs (redacted where reasonable): OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data ... debug1: ... line 1: Applying options for ... debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 53: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ... [x.x.x.x] port 22. debug1: Connection established. debug1: identity file /.../.ssh/id_rsa type -1 debug1: identity file /.../.ssh/id_rsa-cert type -1 debug3: Incorrect RSA1 identifier debug3: Could not load "/.../.ssh/id_dsa" as a RSA1 public key debug1: identity file /.../.ssh/id_dsa type 2 debug1: identity file /.../.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.2 debug1: match: OpenSSH_5.2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "..." from file "/.../.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /.../.ssh/known_hosts:9 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 136/256 debug2: bits set: 523/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ... debug3: load_hostkeys: loading entries for host "..." from file "/.../.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /.../.ssh/known_hosts:9 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "x.x.x.x" from file "/.../.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /.../.ssh/known_hosts:9 debug3: load_hostkeys: loaded 1 keys debug1: Host '...' is known and matches the RSA host key. debug1: Found key in /.../.ssh/known_hosts:9 debug2: bits set: 492/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /.../.ssh/id_dsa (0x7f8b7b41d6c0) debug2: key: /.../.ssh/id_rsa (0x0) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: start over, passed a different list publickey,password,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering DSA public key: /.../.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-dss blen 434 debug2: input_userauth_pk_ok: fp ... debug3: sign_and_send_pubkey: DSA ... debug1: Authentication succeeded (publickey). Authenticated to ... ([x.x.x.x]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. ****** Hangs here ****** debug2: callback start debug2: client_session2_setup: id 0 debug2: fd 3 setting TCP_NODELAY debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env TERM_PROGRAM debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env TMPDIR debug3: Ignored env Apple_PubSub_Socket_Render debug3: Ignored env TERM_PROGRAM_VERSION debug3: Ignored env TERM_SESSION_ID debug3: Ignored env USER debug3: Ignored env COMMAND_MODE debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env Apple_Ubiquity_Message debug3: Ignored env __CF_USER_TEXT_ENCODING debug3: Ignored env PATH debug3: Ignored env MKL_NUM_THREADS debug3: Ignored env PWD debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env DYLD_LIBRARY_PATH debug3: Ignored env PYTHONPATH debug3: Ignored env LOGNAME debug3: Ignored env DISPLAY debug3: Ignored env SECURITYSESSIONID debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 On the server side, the debug output looks like: Sep 16 18:46:40 ... sshd[31435]: debug1: inetd sockets after dupping: 3, 4 Sep 16 18:46:40 ... sshd[31435]: Connection from x.x.x.x port 52758 Sep 16 18:46:40 ... sshd[31435]: debug1: Current Session ID is 56AC0FB0 / Session Attributes are 00008000 Sep 16 18:46:40 ... sshd[31435]: debug1: Running in inetd mode in a non-root session... assuming inetd created the session for us. Sep 16 18:46:40 ... sshd[31435]: debug1: Client protocol version 2.0; client software version OpenSSH_5.9 Sep 16 18:46:40 ... sshd[31435]: debug1: match: OpenSSH_5.9 pat OpenSSH* Sep 16 18:46:40 ... sshd[31435]: debug1: Enabling compatibility mode for protocol 2.0 Sep 16 18:46:40 ... sshd[31435]: debug1: Local version string SSH-2.0-OpenSSH_5.2 Sep 16 18:46:40 ... sshd[31435]: debug1: Checking with Service ACLs for ssh login restrictions Sep 16 18:46:40 ... sshd[31435]: debug1: call to mbr_user_name_to_uuid with <...> suceeded to retrieve user_uuid Sep 16 18:46:40 ... sshd[31435]: debug1: Call to mbr_check_service_membership failed with status <0> Sep 16 18:46:40 ... sshd[31435]: debug1: PAM: initializing for "..." Sep 16 18:46:40 ... sshd[31435]: debug1: PAM: setting PAM_RHOST to "x.x.x.x" Sep 16 18:46:40 ... sshd[31435]: Failed none for ... from x.x.x.x port 52758 ssh2 Sep 16 18:46:40 ... sshd[31435]: debug1: temporarily_use_uid: 509/20 (e=0/0) Sep 16 18:46:40 ... sshd[31435]: debug1: trying public key file /.../.ssh/authorized_keys Sep 16 18:46:40 ... sshd[31435]: debug1: restore_uid: 0/0 Sep 16 18:46:40 ... sshd[31435]: debug1: temporarily_use_uid: 509/20 (e=0/0) Sep 16 18:46:40 ... sshd[31435]: debug1: trying public key file /.../.ssh/authorized_keys2 Sep 16 18:46:40 ... sshd[31435]: debug1: fd 5 clearing O_NONBLOCK Sep 16 18:46:40 ... sshd[31435]: debug1: matching key found: file /.../.ssh/authorized_keys2, line 1 Sep 16 18:46:40 ... sshd[31435]: Found matching DSA key: ... Sep 16 18:46:40 ... sshd[31435]: debug1: restore_uid: 0/0 Sep 16 18:46:40 ... sshd[31435]: debug1: temporarily_use_uid: 509/20 (e=0/0) Sep 16 18:46:40 ... sshd[31435]: debug1: trying public key file /.../.ssh/authorized_keys Sep 16 18:46:40 ... sshd[31435]: debug1: restore_uid: 0/0 Sep 16 18:46:40 ... sshd[31435]: debug1: temporarily_use_uid: 509/20 (e=0/0) Sep 16 18:46:40 ... sshd[31435]: debug1: trying public key file /.../.ssh/authorized_keys2 Sep 16 18:46:40 ... sshd[31435]: debug1: fd 5 clearing O_NONBLOCK Sep 16 18:46:40 ... sshd[31435]: debug1: matching key found: file /.../.ssh/authorized_keys2, line 1 Sep 16 18:46:40 ... sshd[31435]: Found matching DSA key: ... Sep 16 18:46:40 ... sshd[31435]: debug1: restore_uid: 0/0 Sep 16 18:46:40 ... sshd[31435]: debug1: ssh_dss_verify: signature correct Sep 16 18:46:40 ... sshd[31435]: debug1: do_pam_account: called Sep 16 18:46:40 ... sshd[31435]: Accepted publickey for ... from x.x.x.x port 52758 ssh2 Sep 16 18:46:40 ... sshd[31435]: debug1: monitor_child_preauth: ... has been authenticated by privileged process Sep 16 18:46:40 ... sshd[31435]: debug1: PAM: establishing credentials ***** Hangs here ***** Sep 16 18:46:54 ... sshd[31435]: User child is on pid 31654 Sep 16 18:46:54 ... sshd[31654]: debug1: PAM: establishing credentials Sep 16 18:46:54 ... sshd[31654]: debug1: permanently_set_uid: 509/20 Sep 16 18:46:54 ... sshd[31654]: debug1: Entering interactive session for SSH2. Sep 16 18:46:54 ... sshd[31654]: debug1: server_init_dispatch_20 Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 Sep 16 18:46:54 ... sshd[31654]: debug1: input_session_request Sep 16 18:46:54 ... sshd[31654]: debug1: channel 0: new [server-session] Sep 16 18:46:54 ... sshd[31654]: debug1: session_new: session 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_open: channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_open: session 0: link with channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_open: confirm session Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_global_request: rtype [email protected] want_reply 0 Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_req: channel 0 request pty-req reply 1 Sep 16 18:46:54 ... sshd[31654]: debug1: session_by_channel: session 0 channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_input_channel_req: session 0 req pty-req Sep 16 18:46:54 ... sshd[31654]: debug1: Allocating pty. Sep 16 18:46:54 ... sshd[31435]: debug1: session_new: session 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_pty_req: session 0 alloc /dev/ttys008 Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_req: channel 0 request env reply 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_by_channel: session 0 channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_input_channel_req: session 0 req env Sep 16 18:46:54 ... sshd[31654]: debug1: server_input_channel_req: channel 0 request shell reply 1 Sep 16 18:46:54 ... sshd[31654]: debug1: session_by_channel: session 0 channel 0 Sep 16 18:46:54 ... sshd[31654]: debug1: session_input_channel_req: session 0 req shell Sep 16 18:46:54 ... sshd[31655]: debug1: Setting controlling tty using TIOCSCTTY.

  Read the article

• Exchange 2010 Recovery: Mailbox not found using Restore-Mailbox

  - by user146665

  Exchange 2010 SP1 Update Rollup 5 server information store database was restored to a Recovery Database using EMC Networker successfully. The Recovery Database is in a mounted state with mailboxes listed within in it. However, when restoring the mailbox content using the following command: Restore-Mailbox –Identity MYMAILBOX –RecoveryDatabase MYRECOVERYDB –RecoveryMailbox LOSTMAILBOX –TargetFolder FOLDERFORLOSTMAILBOX Returns the following error: Mailbox "LOSTMAILBOX" doesn't exist on database "MYRECOVERYDB". + CategoryInfo : NotSpecified: (0:Int32) [Restore-Mailbox], ManagementObjectNotFoundException + FullyQualifiedErrorId : 66265C53,Microsoft.Exchange.Management.RecipientTasks.RestoreMailbox Note: I've used the correct alias name for the mailbox name; i've also tried combinations such as first name, or last name or both and so forth. Issuing a Get-MailboxStatistics -Database MYRECOVERYDB to see if the mailbox is there and it is as shown below: DisplayName ItemCount StorageLimitStatus LOSTMAILBOX 39495 MailboxDisabled Note: The StorageLimitStatus shows a strange output of MaibloxDisabled. Perhaps this may be the culprit. Going by the article's documentation I cannot complete the restore of the mailbox as I'm stuck at the restore-mailbox error that it cannot be found. Please advise & Thank you! Source of article: http://www.testlabs.se/blog/2012/07/05/exchange-2010-restore-to-recovery-database-using-emc-networker/

  Read the article

• Setup.exe called from a batch file crashes with error 0x0000006

  - by Alex

  We're going to be installing some new software on pretty much all of our computers and I'm trying to setup a GPO to do it. We're running a Windows Server 2008 R2 domain controller and all of our machines are Windows 7. The GPO calls the following script which sits on a network share on our file server. The script it self calls an executable that sits on another network share on another server. The executable will imediatelly crash with an error 0x0000006. The event log just says this: Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Setup.exe because of this error. Here's the script (which is stored on \\WIN2K8R2-F-01\Remote Applications): @ECHO OFF IF DEFINED ProgramFiles(x86) ( ECHO DEBUG: 64-bit platform SET _path="C:\Program Files (x86)\Canam" ) ELSE ( ECHO DEBUG: 32-bit platform SET _path="C:\Program Files\Canam" ) IF NOT EXIST %_path% ( ECHO DEBUG: Folder does not exist PUSHD \\WIN2K8R2-PSA-01\PSA Data\Client START "" "Setup.exe" "/q" POPD ) ELSE ( ECHO DEBUG: Folder exists ) Running the script manually as administrator also results in the same error. Setting up a shortcut with the same target and parameters works perfectly. Manually calling the executable also works. Not sure if it matters, but the installer is based on dotNETInstaller. I don't know what version though. I'd appreciate any suggestions on fixing this. Thanks in advance! UPDATE I highly doubt this matters, but the network share that the script is hosted in is a shared drive, while the network share the script references for the executable is a shared folder. Also, both shares have Domain Computers listed with full access for the sharing and security tabs. And PUSHD works without wrapping the path in quotes.

  Read the article

• Listing group members using ldapsearch

  - by colemanm

  Our corporate LDAP directory is housed on a Snow Leopard Server Open Directory setup. I'm trying to use the ldapsearch tool to export an .ldif file to import into another external LDAP server to authenticate with externally; basically trying to be able to use the same credentials internally and externally. I've got ldapsearch working and giving me the contents and attributes of everything in the "Users" OU, and even filtering down to only the attributes I need: ldapsearch -xLLL -H ldap://server.domain.net / -b "cn=users,dc=server,dc=domain,dc=net" objectClass / uid uidNumber cn userPassword > directorycontents.ldif That gives me a list of users and properties that I can import to my remote OpenLDAP server. dn: uid=username1,cn=users,dc=server,dc=domain,dc=net objectClass: inetOrgPerson objectClass: posixAccount objectClass: organizationalPerson uidNumber: 1000 uid: username1 userPassword:: (hashedpassword) cn: username1 However, when I try the same query on an OD "group" instead of a "container," the results are something like this: dn: cn=groupname,cn=groups,dc=server,dc=domain,dc=net objectClass: posixGroup objectClass: apple-group objectClass: extensibleObject objectClass: top gidNumber: 1032 cn: groupname memberUid: username1 memberUid: username2 memberUid: username3 What I really want is a list of users from the top example filtered based on their group memberships, but it looks like membership is set from the Group side, rather than the user account side. There must be a way to filter this down and only export what I need, right?

  Read the article

• How to configure VirtualBox server for performance at home

  - by BluJai

  I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

  Read the article

• IIS 7.0 404 Custom Error Page and web.config

  - by Colin

  I am having trouble with a custom 404 error page. I have a domain running a .NET proj with it's own error handling. I have a web.config running for the domain which contains: <customErrors mode="RemoteOnly"> <error statusCode="500" redirect="/Error"/> <error statusCode="404" redirect="/404"/> </customErrors> On a sub dir of that domain I am ignoring all routes there by doing routes.IgnoreRoute("Assets/{*pathInfo}"); in the .NET proj and I want to put a custom 404 error page on that and any sub dir's of Assets. The sub dir contains static content like images, css, js etc etc. So in the Error Pages section of IIS I put a redirect to an absolute URL. The web.config for that dir looks like the following: <system.webServer> <httpErrors> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="http://mydomain.com/404" responseMode="Redirect" /> </httpErrors> </system.webServer> But I navigate to an unknown URL under that dir and yet I still see the default IIS 404 page. I am also seeing an alert in IIS that reads: You have configured detailed error messages to be returned for both local and remote requests. When this option is selected, custom error configuration is not used. Does this have anything to do with the customErrors mode="RemoteOnly" in the site web.config? I have tried to overwrite the customErrors in the sub dir web.config but nothing changes. Any help would be appreciated. Thanks.

  Read the article

• transparently proxying a firewalled web application from a non-standard port to port 80

  - by Terrence Brannon

  I have a web application that serves on port 8088 on $server. However, the only port accessible from remote on $server is port 80. Furthermore, only CGI programs can execute on port 80. I would like to write a CGI program accessible via port 80 that allows one to use the web app running on port 8088. From my view, an ideal solution would be some sort of Java web browser that simply opened up a window and allowed me to use the program running on that port. The CGI program would simply initiate a web browser applet or something. I wrote a Perl CGI program that does it, but I really would like a more transparent solution: my $q = new CGI; print $q->header; use LWP::Simple; use HTML::Tree; my $base = "http://localhost:8088"; my $request = $base; my $qurl = $q->param('url'); if (length($qurl) > 1) { warn "long $qurl"; $request = "$base$qurl"; } else { warn "short $qurl"; } my $content = get($request); my $tree = HTML::TreeBuilder->new_from_content($content); my @a = $tree->look_down('_tag' => 'a'); for my $a (@a) { my $url = $a->attr('href'); next if index($url, '#') > -1 ; $url = "?url=$url"; $a->attr(href => $url); } print $tree->as_HTML;

  Read the article

• howto configure mod_proxy for apache2, jetty

  - by Kaustubh P

  Hello, This is how I have setup my environment, atm. An apache2 instance on port 80. Jetty instance on the same server, on port 8090. Use-Case: When I visit foo.com, I should see the webapp, which is hosted on jetty, port 8090. If I put foo.com/blog, I should see the wordpress blog, which is hosted on apache. (I read howtos on the web, and installed it using AMP.) Below are my various configuration files: /etc/apache2/mods-enabled/proxy.conf: ProxyPass / http://foo.com:8090/ << this is the jetty server ProxyPass /blog http://foo.com/blog ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPreserveHost On ProxyStatus On /etc/apache2/httpd.conf: LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so LoadModule proxy_balancer_module /usr/lib/apache2/modules/mod_proxy_balancer.so LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so LoadModule proxy_ajp_module /usr/lib/apache2/modules/mod_proxy_ajp.so I have not created any other files, in sites-available or sites-enabled. Current situation: If I goto foo.com, I see the webapp. If I goto foo.com/blog, I see a HTTP ERROR 404 Problem accessing /errors/404.html. Reason: NOT_FOUND powered by jetty:// If I comment out the first ProxyPass line, then on foo.com, I only see the homepage, without CSS applied, ie, only text.. .. and going to foo.com/blog gives me a this error: The proxy server received an invalid response from an upstream server. The proxy server could not handle the request GET /blog. Reason: Error reading from remote server I also cannot access /phpmyadmin, giving the same 404 NOT_FOUND error as above. I am running Debian squeeze on an Amazon EC2 Instance. Question: Where am I going wrong? What changes should I make in the proxy.conf (or another conf files) to be able to visit the blog?

  Read the article

• hardlinking takes a lot of space

  - by mr_schlomo

  I made an rsync incremental backup script for my server that will copy a MySQL database backup and a specified folder path to a remote server. Here's the code on Github. Code excerpt from lines 53-57: ############### Create most current hand link echo "Creating most current hard link on backup server $most_recent_backup_link" ssh $remote_backup_server rm -rf ${most_recent_backup_link} ssh $remote_backup_server cp -alv ${remote_backup_folder}/backup-${backup_folder_name}/ ${most_recent_backup_link} I'm having a problem with creating the most current hard links on the backup server (lines 53-57 in the program). Everything works, and rsync only copies about 1-2MB of data. But the hard link copy process uses about 30MB of data. I get a huge laundry list of files that haven't changed and the only ones that have changed are very small in size. Normally this isn't a problem, but when you backup every hour, the backup should be as small as possible. For example, the last backup I did, rsync transferred 1.3MB. But the backup directory grew 35MB. Why are the hard links taking up so much hard drive space?

  Read the article

• Getting 2560x1600 out of an ATI Radeon HD 4670 on Windows 7

  - by Alexey

  Greetings, I've got a Dell Studio XPS 1640 laptop (with an ATI Radeon HD 4670 graphics card) running Windows 7, and just bought a Dell 3007HPC 30-inch monitor for it. I'm trying to figure out how to get the full 2560x1600 experience out of this setup. Here's what I've done so far: Plug in using an HDMI cable and an HDMI--D-DVI converter on the monitor side. Open up Screen Resolution. Maximum supported setting is 1920x1080. Tried that (several times) - sometimes it doesn't work at all (blank screen); other times, it only shows the first 1280x800 pixels on the bigger screen. Tried using the Catalyst control center - played with various settings there, couldn't get the screen to show anything interesting. Tried using PowerStrip to set a custom resolution, again, no luck. Spoke to a Dell Preferred Custom Support guy for about an hour before giving up. He remote-accessed my computer, and told me that (1) The maximum supported resolution for XPS 1640 is 1920x1080, and (2) 'it seems to be working from where he sees it, must be a connection issue'. None of this has helped. Does anybody have ideas? Should I be using a different cable set up? Am I using Powerstrip wrong?

  Read the article

• How can I recover from SharePoint configuration errors after promoting the server to a Domain Controller?

  - by jjr2527

  I have a SharePoint 2010 VM setup in VirtualBox and I was using local machine accounts to handle security on the server. While preparing for a demo it came time to have some meaningful users on my VM image. I followed some docs on promoting my server to a Domain Controller in a new forrest. So now I have [MachineName].SPDEMO.CONTOSO.com and I can add users as needed. However, when I try to connect to my SharePoint sites I am getting a white screen with the error: "Cannot connect to the configuration database" I changed the pool identity account of each of my IIS app pools to the new Administrator account and started the services successfully but I can't get the SQL services to start up. When I try to start them I get the following error: Windows could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 17058. In the event log I see the following error: The SQL Server (MSSQLSERVER) service terminated with service-specific error %%17058. Can I recover from this or should I roll back or just uninstall the Domain Controller role. I'd like to keep the server as a standalone DC so I can do some user profile creation/management but I need the SharePoint bits to work as well.

  Read the article

• Development on Windows 7; Web server on Linux - How to share Apache web root?

  - by TheKeys

  I've got a LAMP server that I want to use as a local web server. I've got a Windows 7 machine that I want to use as my development machine. The machines will be on the same LAN (or the Windows box will be VPNed into the LAN). My questions is, what is the best way of sharing the web root of the LAMP server so that I can edit the files on the remote Windows 7 machine and how do I go about configuring this on the Linux machine? (Fedora 16) I would like the solution to be as easy to use as possible with preferably no extra steps required to save/edit/upload files from my IDE on my Windows 7 machine. I'm thinking either a Samba or NFS share are the way to go but I'm concerned I'm going to run into issues with permissions and unix/windows file handling. Is one better than ther other for my use case or is there a better alternative solution? I'm currently using Windows 7 Professional which doesn't have NFS support but would upgrade to Ultimate which does have NFS support if it's the best solution.

  Read the article

• Seeking web-based FTP client for very large file upload

  - by Paul M. Nguyen

  I have looked around for these for some time... the limits imposed by the web server and/or the dynamic programming environment (e.g. PHP) are far too restrictive for the application I'm working on. We need to be able to move large graphics and video files to and from clients (ranging from tens of MB to a few GB in a single file). Plain FTP with a proper desktop client will do the trick, and we're hosting this in Amazon EC2 with EBS. User management will be done from the office via webmin. Users are chroot-jailed into their home dir by proftpd. net2ftp will work for many clients, but we often need to move single files that approach 1GB or exceed 2-3GB which is way out of the range of any http-based uploader. So we turn to Java or Flash - can they do it? From within the web browser establish an FTP connection and grab a huge file? There are licensed applets and such out there, but none seem convincing. Again, I'm looking for some code that can speak FTP and read (& write?) the local disk, that is delivered in a web browser, and can move single files of 2GB+. The reason for having a web-based interface to FTP is to skip the software installation step for our clients. I will consider proper desktop client software as long as it's "portable" and at least Win+Mac and can be easily configured by lay-man users in a hurry.

  Read the article

• Possible DNS issue after a reinstall of Windows Server 2000 (get off my lawn)

  - by cop1152

  I just replaced a drive on a Win2000 Server that replicates AD and issues out DHCP at one of our offices. I successfully joined it to the domain, setup range of IP's, etc, but am still having issues. I cannot RDC to it with name or IP. I can ping it, browse to it with Windows Explorer, and remote to it with some other software, but not RDC. The other issue is this: Users are unable to authenticate on it. They receive the message 'username or password incorrect' (or something like that). Changes made on the main domain controller seem to take forever to trickle down. The most significant entry in the DNS Server Log is Event ID 7062: The DNS Server Encountered a Packet Addressed to Itself. At least, I think its significant. The Directory Services Log shows numerous Event IDs 1265: The attempt to establish a replication link with parameters failed with the following status: The DSA operation is unable to proceed because of a DNS lookup failure. Does this make any sense to anyone? I feel like its something very simple that I am overlooking. Thanks in advance.

  Read the article

• Problem hosting server behing personal router

  - by Venkatesh Hodavdekar

  I recently bought the domain name lucidcontraptions.com and want to host the website from home. I have a D-Link router in which I have set up my personal virtual server correctly. My application server is Apache 2.2. The server works perfectly with the following settings: External IP: 207.172.xx.xx. Public port: 8888 Internal IP: 192.168.xx.xx. Private port: 80 If I go to 207.172.xx.xx:8888/ the server works perfectly and my Apache page shows up without any issues, both from inside the intranet as well as outside. This setting would not work out for me as I am not allowed port numbers in my DNS management. Now when I tweak the settings to the following: External IP: 207.172.xx.xx. Public port: 80 Internal IP: 192.168.xx.xx. Private port: 80 If I go to 207.172.xx.xx/ the server works perfectly and my Apache page shows up without any issues, BUT ONLY FROM INSIDE THE INTRANET. This page does not show up for people outside the intranet.

  Read the article

• Windows XP laptop doesn't appear in WSUS All computers list

  - by George

  I have this one laptop that doesn't appear in WSUS all computers list. We have about 23-25 PCs/laptops/servers in the network, all, but one are listed in WSUS. This is what I have done so far: 1) Changing Updates on local PC: Go to your Windows XP client and start a new Microsoft Management Console (MMC). At Start, Run, type MMC. Use Ctrl+M to add a new snap-in. Click Add, and then add the Group Policy Object Editor for the Local Computer. Click Close, and then click OK. Expand the Local Computer Policy. Under Computer Configuration, go to Administrative Templates, Windows Components, Windows Update. In the right-hand pane, double-click Specify intranet Microsoft update service location. Configure the settings to reflect my WSUS server. Click OK and then close the MMC without saving it. executed wuauclt.exe /detectnow 2) Edited registry key to be pushed to the PCs using GPO [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "WUServer"=http://wsusserver "TargetGroupEnabled"=dword:00000001 "TargetGroup"="WINXP" "WUStatusServer"=http://wsuswerver 3) executed wuauclt /resetauthorization /detectnow 4)Synchronised and refreshed the group I am running out of ideas here. The client is running Windows XP pro, WSUS version is 3.0 and is running on Windows 2008 R2 64-bit. Please, help! Thanks! EDIT 13.IX.2012 @ 15.40 I should have also mentioned that we do have a Windows Update GPO for workstations group and that laptop is a part of that group.

  Read the article

• How do you setup FTP with IIS Manager Users in an NLB environment with shared IIS configs?

  - by William Jens

  I've setup a 2 node NLB cluster and used the following to share IIS configs between them. http://blogs.technet.com/b/meamcs/archive/2012/05/30/configuring-iis-7-5-shared-configuration.aspx The IIS configs and content is located on a network share via a UNC path. This works - updating IIS settings on one node, is visible in another node and my website works on the individual nodes and the cluster as whole. I'm able to setup an FTP site and successfully connect with my Windows login. However, I want to use IIS Manager Authentication as defined in: http://www.iis.net/learn/publish/using-the-ftp-service/configure-ftp-with-iis-manager-authentication-in-iis-7 I've tried using "Network Service" with the FTP COM object as well as a dedicated user account that exists on all three hosts, but every time I try to login with an IIS user I get something like the following: IISWMSVC_AUTHENTICATION_UNABLE_TO_READ_CONFIG An unexpected error occurred while retrieving the authentication information. Exception:System.Runtime.InteropServices.COMException (0x8007052E): Filename: Error: at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.GetAdminSection(String bstrSectionName, String bstrSectionPath) at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath) at Microsoft.Web.Management.Server.ConfigurationAuthenticationProvider.GetSection(ServerManager serverManager) Process:dllhost User=NT AUTHORITY\NETWORK SERVICE Can anyone point me in the right direction here?

  Read the article

• Sharepoint Workflow "Failed on Start" only when powershell import script is called from task scheduler

  - by Matt Keller

  I created a simple PowerShell script that takes an XML file in a local directory on our sharepoint server and imports it into a specific SharePoint form library. (Content management enabled library if that makes any difference) This script works flawlessly if i run it from the PowerShell command line manually. I call it like such: ".\script_name.ps1". It completes without error and the item is imported into the form library successfully. The workflow begins on the item and everything is happy dandy. However, i run into issues when i setup a scheduled task using Windows Server 2008 R2's task manager. The task runs the script without error and it does actually import the XML into the form library. I looks perfectly normal just as if i had run the script manually. However, after about 10 or 20 minutes the workflow status for that item changes from "In progress" to "Failed on Start (Retrying)". The scheduled task in question is a basic task and has only one action. (Start a program) The "program/script" box is set to "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" and the "Add arguments" box is set to the path of the actual ps1 script. (C:\scripts\sharepoint_import.ps1) I've tried running the task as various users. I've also tried with and without the "Run with highest privileges" check box. Nothing seems to work. For reference, here is the script i am using to import items into the form library.

  Read the article

• How to manually start and re-start Apache with mod_wsgi powering a password protected Python WSGI app?

  - by Mahmoud Abdelkader

  I'm working on a project where I have to meet some regulatory requirements that require at least 3 out of 5 authorized users to start a backend web service that handles very sensitive information using pre-assigned passwords. Right now, the prototype has been approved and is running using Python's wsgiref.simple_server(), which I have programmed to manually prompt for the passwords. Now that the prototype has been approved, I have to migrate the web application to a production environment where I will need to run it behind Apache and mod_wsgi. I have two questions: Right now, I use a thin Python wrapper around expect to programmatically allow for remote password entry. How do I get Apache to prompt me for a password before starting? Will this have to be in the app.wsgi script that's executed by mod_wsgi? How would that work since Apache daemonizes, and thus, has no stdin! Will I have to worry about some type of code reload? Apache probably has some maximum number of requests before it kills and restarts another worker process, but, would this require a password prompt as well?

  Read the article

• Basic OpenVPN setup

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You

  Read the article

• Toshiba External Hard Drive freezes computer

  - by Ephraim

  I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

  Read the article

• how to automatically mount ~/Private using ecryptfs when logging in via ssh pubkey

  - by andreash

  Raionale: I want to be able to automatically make backups to a remote machine, which will be encrypted with ecryptfs. The title says it all: I set up ecryptfs-utils on my Debian Squeeze box, and set up one user to use it via ecryptfs-setup-private. When I log in via SSH using password authentication, the ~/Private directory automatically gets mounted. How can I achieve that ~/Private also automatically gets mounted when logging in via SSH using public key authentication? Obviously, the best solution would be if ecryptfs could somehow 'use' the SSH public key to en/decrypt the data (I know that then using the user's password would not be able to en/decrypt the data any more; this would be acceptable). Probably, this will not work. So perhaps somehow call ecryptfs-mount-private via ssh before logging in via public key? Probably, then I would need to somehow pipe the passphrase through the SSH connection, right? So I would need to store it on the source machine's file system. Not nice either. Any other ideas?

  Read the article

< Previous Page | 680 681 682 683 684 685 686 687 688 689 690 691  | Next Page >