Search Results

Search found 43416 results on 1737 pages for 'domain list'.

Page 685/1737 | < Previous Page | 681 682 683 684 685 686 687 688 689 690 691 692  | Next Page >

  • What's required to configure Ubuntu to use a specific DNS server?

    - by ks78
    I've setup two Amazon EC2 instances, both running Ubuntu Server. One is configured as a DNS server running bind9, which will be used to allow EC2 instances to communicate with each other based on hostname rather than IP, since their private IPs may change. I think I have the DNS server setup correctly. I want to use the second EC2 instance to test the DNS server. Using Webmin, I've added the DNS server's private IP to the client's DNS Servers list and added the domain to the Search Domains list. I did have to edit /etc/dhcp3/dhclint.conf to make my changes stick. After reboot, I expected I'd be able to ping or nslookup the DNS server from the test client, but it can't seem to find the server. Is there something I'm missing? What's required to configure an Ubuntu client to use a DNS server? I just want to make sure I'm not missing something before I assume the server's the problem.

    Read the article

  • Can't access server running CentOS 6.3 in vmware

    - by localhost
    I just installed CentOS on a vmware machine that uses a bridged connection, installed apache, php and mysql, but when I run service httpd start I get a warning(?): Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using localhost.localdomain for ServerName I can connect to the server using putty, so I really have no idea why it won't load in the browser. EDIT: Httpd starts successfully, return [ OK ]. Running netstat -tuplen | grep :80 yields: tcp 0 0 :::80 :::* LISTEN 0 40392 15894/httpd I am able to connect with putty to 192.168.0.113, but browser says can't connect to 192.168.0.113

    Read the article

  • Vmware Player Network adaptors have no network or internet access in windows 7 enterprise

    - by daffers
    As per the title. My VMWare player installation has setup the two network adaptor VMnet1 and VMnet8 and they are picked up as unidentified networks with no network access (i need this to activate my windows server installation on it). The option to change the network location is not available (this might be because of network policy on the domain despite having set this as configurable in the local security policy section). Is there anyway i can change how these networks are detected or alter the configuration of vmware to get around this?

    Read the article

  • Error while creating a VM using KVM

    - by Karan Gurnani
    I am trying to set up a VM on my Ubuntu 13.04 Desktop and it's giving me error when I try to start the VM. The error states: virsh # start vm1 error: Failed to start domain vm1 error: internal error process exited while connecting to monitor: W: kvm binary is deprecated, please use qemu-system-x86_64 instead char device redirected to /dev/pts/2 (label charserial0) qemu: at most 2047 MB RAM can be simulated What is the workaround for this, if any?

    Read the article

  • lighttpd virtual host config

    - by muncherelli
    Trying to get these two vhosts set up correctly. I have two sites on this domain that i'm hosting: www.example.com/example.com and test.example.com. How do I get both of these to work in my vhost definitions? I have: $HTTP["host"] == "test.example.com" { and $HTTP["host"] =~ "(^|.)example.com$" { (I think this is for *.example.com) It always goes to the second one, even if I am trying to go to test.example.com. I need to be able to host www.example.com/example.com and test.example.com

    Read the article

  • Configure a SPF rule on Ubuntu

    - by TiuTalk
    Where I can create/insert the SPF rules to allow a external server to authenticate and send e-mails using the domain name of my server running Ubuntu? I need to insert this rule: v=spf1 ip4:111.111.111.111/29 ip4:111.111.111.111/24 a mx ~all Thanks :)

    Read the article

  • Indirect Postfix bounces create new user directories

    - by hheimbuerger
    I'm running Postfix on my personal server in a data centre. I am not a professional mail hoster and not a Postfix expert, it is just used for a few domains served from that server. IIRC, I mostly followed this howto when setting up Postfix. Mails addressed to one of the domains the server manages are delivered locally (/srv/mail) to be fetched with Dovecot. Mails to other domains require usage of SMTPS. The mailbox configuration is stored in MySQL. The problem I have is that I suddenly found new mailboxes being created on the disk. Let's say I have the domain 'example.com'. Then I would have lots of new directories, e.g. /srv/mail/example.com/abenaackart /srv/mail/example.com/abenaacton etc. There are no entries for these addresses in my database, neither as a mailbox nor as an alias. It's clearly spam from auto-generated names. Most of them start with 'a', a few with 'b' and a couple of random ones with other letters. At first I was afraid of an attack, but all security restrictions seem to work. If I try to send mail to these addresses, I get an "Recipient address rejected: User unknown in virtual mailbox table" during the 'RCPT TO' stage. So I looked into the mails stored in these mailboxes. Turns out that all of them are bounces. It seems like all of them were sent from a randomly generated name to an alias that really exists on my system, but pointed to an invalid destination address on another host. So Postfix accepted it, then tried to redirect it to another mail server, which rejected it. This bounced back to my Postfix server, which now took the bounce and stored it locally -- because it seemed to be originating from one of the addresses it manages. Example: My Postfix server handles the example.com domain. [email protected] is configured to redirect to [email protected]. [email protected] has since been deleted from the Hotmail servers. Spammer sends mail with FROM:[email protected] and TO:[email protected]. My Postfix server accepts the mail and tries to hand it off to hotmail.com. hotmail.com sends a bounce back. My Postfix server accepts the bounce and delivers it to /srv/mail/example.com/bob. The last step is what I don't want. I'm not quite sure what it should do instead, but creating hundreds of new mailboxes on my disk is not what I want... Any ideas how to get rid of this behaviour? I'll happily post parts of my configuration, but I'm not really sure where to start debugging the problem at this point.

    Read the article

  • How to setup squid only cache specific domains?

    - by ???
    For example, I want squid to cache HTTP contents only for *.archive.ubuntu.com, which is blocked by firewall, and don't cache for other domains. And, only LAN (192.168.0.0/16) users can access the cached contents, but all users are allowed to access non-cached contents. User-IP Dest-Domain acl Expect ---------------- ----------------------- ------ ------------------------- 192.168.0.0/16 *.archive.ubuntu.com allow Cache Proxy, Fast 192.168.0.0/16 *.other allow Pass Proxy, Slow Other * allow Pass Proxy, Slow

    Read the article

  • Outlook Anywhere inconsistencies with authentication methods

    - by gravyface
    So I've read this question and attempted just about every other workaround I've found online. Problem seems completely illogical to me, anyways: SBS 2011, vanilla install; haven't touched anything in IIS or Exchange outside of what's been done through the checklist (brand new domain, completely new customer) except to import an existing wildcard certificate for *.example.com (which is valid, Remote Web Workplace and Outlook Web Access work fine). On the two test machines and one production machine running a mixture of Windows XP Pro, Windows 7 and Outlook 2003 through to 2010, I've had no problem saving the password after configuring Outlook Anywhere using the wrong authentication method. I repeat, I have had no issues using the wrong authentication method on these test machines; password saves the first time, no problem, can verify it exists in the credentials manager (Start Run control userpasswords2), close Outlook, reboot, go make a sammie, come back, credentials are still saved. When I say wrong, it's because I was choosing NTLM and Exchange (under Exchange Console Server Configuration Client Access) was set by default to use Basic. On two completely different machines setup by a co-worker, they had (under my guidance) used NTLM as well... except that frustratingly, Outlook would always ask for a password. One machine was Windows XP with Outlook 2010, the other was Windows 7 with Outlook 2003. When these two machines were set to use Basic -- the correct settings -- the option to save was there and now works without issue. Puzzled by how my machines could possibly work with the wrong authentication, I then went into one of them and changed the authentication method to Basic. Now here's where it gets a little crazy: if I go under Outlook and change the authentication to use the correct setting (Basic) it fails to save the password and Outlook prompts every time (without a "remember me" checkbox). I have not had a chance to change it to Basic on the other two machines to see if this is just a fluke or not, but something just isn't right here. My two hunches are either a missing/installed KB Update or perhaps a local security policy. I should add that none of the 5 test machines in the equation here have ever been joined to the domain.

    Read the article

  • Is there a taskbar for OS X?

    - by Paul Biggar
    I'd like to permanently see a clickable list of windows I have open, in the same way that the taskbar allows in Windows. Can I do this on Mac? Some details: i have many virtual desktops (spaces), so often a single application has windows on many of them. I often have multiple windows of each application, such as the terminal or browser, on the same virtual desktop I have multiple monitors, if it matters. Edit: When I say 'permanently see a clickable list of windows I have open' I mean that I want to see every window I have open, and I'd like to be able to click on each one to open that window. I'm not looking for the newer behaviour where tasks are clustered by application.

    Read the article

  • window login when web application is using network share in IIS 6

    - by James
    Hi, I have installed a web application which is configured using a network drive But i am keep getting a pop up asking for credentials looking in the event log, the network logon is set to my domain/account which looks fine however caller user name is empty (not sure if this is an issue) the application works fine when i use a local drive the application also runs fine when i set "connect as" user the application also works fine when a share on the local machine is used!! direct asses using the unc path is not a problem Please advise what i can do or should check Thanks and Regards, James

    Read the article

  • NLB 2 Windows Server 2003 Servers

    - by Paul Hinett
    I need to configure windows NLB on 2 dedicated servers I have. My main machine has been running for some time, with several domain names pointing to the servers primary IP address. Both servers have 2 NIC's installed, and both have several secondary public IP addresses available if needed? What IP address would I use for the cluster IP, does this IP need to be added to the IP list of both public NIC's ip address list? What IP addresses do I use for the host's dedicated IP? Please help, this is driving me nuts...i've taken down the server twice on accident today! Thank you in advance!

    Read the article

  • How to use integrated support for dyndns clients in 2Wire router ?

    - by Frank
    I logged into the 2Wire web interface, and get to "Broadband Link Advanced Settings" page, how do I use it's integrated support for dyndns clients ? Under "Broadband DNS" it has "Obtain DNS information automatically" selected, under that : Manually configure your DNS information: Primary Server: Secondary Server: Domain Name: what do I need to do ?

    Read the article

  • How to manipulate default document with rewrite module on IIS7?

    - by eugeneK
    Until few month ago i've been using IIS 6 where i could add different Default Documents to each websites which are physically same directory. Since II7 which adds Default Document value to web config i couldn't use such technique as web.config was changed for all the directory. So I've found simple solution with rewrite module to change Default Document for each domain <defaultDocument enabled="false" /> <rewrite> <rewriteMaps> <rewriteMap name="ResolveDefaultDocForHost"> <add key="site1.com" value="Default1.aspx" /> <add key="site2.com" value="Default2.aspx" /> </rewriteMap> </rewriteMaps> <rules> <rule name="DefaultDoc Redirect If No Trailing Slash" stopProcessing="true"> <match url=".*[^/]$" /> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" /> </conditions> <action type="Redirect" url="{R:0}/" /> </rule> <rule name="PerHostDefaultDocSlash" stopProcessing="true"> <match url="$|.*/$" /> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" /> <add input="{ResolveDefaultDocForHost:{HTTP_HOST}}" pattern="(.+)" /> </conditions> <action type="Rewrite" url="{R:0}{C:1}" appendQueryString="true" /> </rule> </rules> </rewrite> Now i've got two other issues. first of all i can't use canonical url rewrite, if i set one then site1.com and site2.com redirected to www.site1.com instead of having www. for each. second problem is that there is a directory within site1' and site2' physical directory called members in which Default.aspx is always a Default Document doesn't matter which domain name was used. It doesn't work as well. Please help me with this issue because i've never thought i will get such problem with supposed to be better IIS7...

    Read the article

  • RADIUS authentication on Cisco switches: how to assign privilege levels?

    - by Massimo
    I need to configure some Cisco switches (IOS 12.x) to authenticate against a RADIUS server; the server is Windows Server 2003's IAS, and it validates users against his Active Directory domain. I know how to configure the switches to validate usernames/passwords against the RADIUS server, and I can succesfully login using an AD account; the question is: how can I set privilege level 15 for users, in order to not have to use enable each time?

    Read the article

  • Why does limiting my virtual memory to 512MB with ulimit -v crash the JVM?

    - by Narinder Kumar
    I am trying to enforce maximum memory a program can consume on a Unix system. I thought ulimit -v should do the trick. Here is a sample Java program I have written for testing : import java.util.*; import java.io.*; public class EatMem { public static void main(String[] args) throws IOException, InterruptedException { System.out.println("Starting up..."); System.out.println("Allocating 128 MB of Memory"); List<byte[]> list = new LinkedList<byte[]>(); list.add(new byte[134217728]); //128 MB System.out.println("Done...."); } } By default, my ulimit settings are (output of ulimit -a) : core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 31398 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 31398 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited When I execute my java program (java EatMem), it executes without any problems. Now I try to limit max memory available to any program launched in the current shell to 512MB by launching the following command : ulimit -v 524288 ulimit -a output shows the limit to be set correctly (I suppose): core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 31398 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 31398 virtual memory (kbytes, -v) 524288 file locks (-x) unlimited If I now try to execute my java program, it gives me the following error: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. Ideally it should not happen as my Java program is only taking around 128MB of memory which is well within my specified ulimit parameters. If I change the arguments to my Java program as below: java -Xmx256m EatMem The program again works fine. While trying to give more memory than limited by ulimit like : java -Xmx800m EatMem results in expected error. Why the program fails to execute in the first case after setting ulimit ? I have tried the above test on Ubuntu 11.10 and 12.0.4 with Java 1.6 and Java 7

    Read the article

  • Is there a way to make software available for remote installation in Windows Server?

    - by Michael J. Gray
    I've heard of folks having a sort of "software repository" which contains a database of product keys and then network installation media for operating systems and other Microsoft software, such as Office. With this, they were then able to join a computer to the domain and grant that user privileges to a set of software and then the client was able to use it either remotely or locally on their machine. I believe it installed from the server on to their local machine. Does anyone happen to know what this is?

    Read the article

  • Website occasionally unavailable - DNS problem

    - by Kamil
    Hi, I have a problem with my website. I have webmin and virualmin. I have one domain as alias, and this alias sometimes is unavailable for several minutes. It's probably DNS problem because chrome shows 105 (net::ERR_NAME_NOT_RESOLVED). How can I troubleshoot this problem?

    Read the article

  • Can one have multiple name servers that don't all belong to the same TLD/provider?

    - by Simon
    In light of the GoDaddy outage we updated our name server list for our domain to include an additional name server provider. The list looks something like this: ns61.domaincontrol.com ns54.domaincontrol.com ns1.dreamhost.com ns2.dreamhost.com Both Godaddy and Dreamhost have zone entries to handle the A and MX records. The idea is that if one provider goes out the other will be a fall-back. However, when I tested my config with http://www.intodns.com/ I am getting a warning about SOA serials not being agreed. Have I misunderstood some fundamentals in name-server config? What can I do to prevent future problems?

    Read the article

  • Connect Microsoft Surface to ad-hoc network

    - by GaTechThomas
    I am trying to connect my Microsoft Surface tablet to an ad-hoc network that I setup on my Windows-7 desktop machine. The Surface machine can see and connect to other hotspots, but it cannot see the ad-hoc network, whereas a second Windows-7 laptop sitting next to the Surface machine can see it. What would cause the ad-hoc network to be visible to Windows 7 but not to Surface? Additional data: Windows-7 is on domain, but Surface is not.

    Read the article

  • NIC models for HVM guests in Xen 4.0

    - by Jed Daniels
    Is there a list of NIC models that I should use with various HVM guests in Xen 4.0? Is there even a list of possible choices for the model=field? I'm planning on running both Windows and FreeBSD guests on the particular Xen box that I'm configuring now, and ideally I'd like a setting that can work on both of them and get me gigabit speeds without a lot of extra hassle loading special drivers (similar to VMware's e1000 NIC option). Any suggestions? The vif line I'm currently using in my config is: vif = [ 'type=ioemu,bridge=eth0,model=ne2k_pci,script=vif-ovs' ] This works in my Windows XP SP3 VM, but is only recognized as a 10Mbit interface. Changing to model=e1000 or model=i82557b resulted in Windows not being able to find a driver for the NIC.

    Read the article

  • SSL with hosted multi-tenant apps

    - by ckarbass
    I have a website that let's users create a subdomain app like this: https://subdomain.mydomain.com I want them to be able to have the app appear as if it's on their site, like this: https://myapp.theirdomain.com or maybe https://theirdomain.com/myapp/ I'm using Heroku and was wondering if this is realistic and how the ssl certificate would be done such that it worked on both domains? If not, can I get it at least working on their domain?

    Read the article

  • Generating a record of the full(-ish) package management state

    - by intuited
    I'm about to make some system changes and I'd like to have a record of my current happy system state. Is there a convenient way to create a record of this? I'd like to keep track of info like currently installed packages and their versions which packages are pinned at what version which source (as in /etc/apt/sources.list) they were installed from whether they were installed directly or automatically installed as a dependency of a different package "unknown unknowns": ie stuff that I don't know that I should be keeping track of but which may be important when trying to figure out why something doesn't work In short, I'd like to keep as much of the aptitude database as possible. What's the best way to do this? It would be nice if the resulting records were easily readable, though this is not really essential. It would be extra nice if it were readily versionable through an SCM tool like git. There is a superuser question that partially answers this, but it only provides the list of currently installed packages.

    Read the article

< Previous Page | 681 682 683 684 685 686 687 688 689 690 691 692  | Next Page >