Search Results

Search found 30695 results on 1228 pages for 'old software'.

Page 689/1228 | < Previous Page | 685 686 687 688 689 690 691 692 693 694 695 696  | Next Page >

• Can a UPS give off an EM field capable of interfering with desktop components?

  - by Magsol

  I own an APC Back-UPS ES 750; it's about 4 years old, and is the only major component remaining in a question that has been boggling me for the last 18 months. (Yep, I originally posted this question about the possessed desktop, and while I marked a solution and closed the question, a week later the same problem returned) I've tried plugging the desktop straight into the wall (but left the other components plugged into the UPS) and the desktop still froze. Is it possible that the EM field generated by the UPS is interfering with my desktop components and causing these otherwise-unpredictable system freezes? To me this sounds like a long shot, but aside from my twin LCD monitors, that just about takes care of all the major components.

  Read the article

• PC shut downs automatically after a second

  - by emzero

  I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware.

  Read the article

• "Fuzzy" Display Problems on New OpenSUSE 11.3 Install

  - by Kryten

  Hi, I have a old Desktop that has a new installation of OpenSUSE 11.3 on it. To get straight to the point, whenever I try to start-up OpenSUSE, my display goes "fuzzy" (almost like a badly tuned TV) and sometimes (not always) my monitor goes black and says "Out of Range: 15.6kHz/49Hz": I assumed that this was a driver problem, so I download the drivers from nvidia and ran the shell script, completed and rebooted. Then OpenSUSE failed to boot with something like "nscd failed to start". At that point I decided to re-install and I did, but this time I tried un-checking "Automatic Configuration" to see if that helped. Got through the install and still have a problem. Unfortunately, my Linux troubleshooting skills are non-existent, so has anyone got any ideas on what could be the problem (is it the display driver?) and how I can fix the problem?

  Read the article

• Windows 7 Slow Searching

  - by Guy Thomas

  I have a new Windows 7 machine with twice as much RAM and a faster processor than my old Windows Server 2008 R2 Machine. I am disappointed that searching amongst my 10,000 image files takes twice as long on my new Windows 7 machine. Both machines have their own copy of these same files. In other respects e.g. opening my huge Outlook files, the new machine is faster. The Windows Search Service has started. And I set indexing on the image folder about 3 days ago. Any ideas why I suffer from this poor index / search experience? Other than adding / removing folders, is there anything I can do to tweak indexing?

  Read the article

• Thermal risks to other components when watercooling CPU

  - by B Sharp

  I recently ordered all the components for a new desktop system to replace my old, dying computer. I wanted to have a really quiet desktop, so I got a case rated for being quiet and opted to try a closed-system CPU water cooling kit (Antec Kuhler H2O 620) that was on sale for a very good price over the Thanksgiving weekend. Most of my components are still in transit, but I became somewhat worried when a friend mentioned that abandoning air cooling units can result in heat buildup inside the case due to heat generated by the video card and other components such as RAM, the northbridge, MOSFETs and voltage regulators radiating heat that the CPU fan would normally at least keep circulating around so it doesn't build up in localized areas. Is this a realistic problem? What other precautions should I take to remove heat from other components? Adding more case fans seems like it would get really noisy. Are there quiet alternatives?

  Read the article

• How do you pronounce Linux?

  - by Xerxes

  I'm tired of the old fart at work who keeps coming upto my desk and telling me all about his "years of experience in working with Unix and Lye-nix". I couldn't vent it out at him because that would be wrong, so I'm going to vent it out here - because obviously (that's the right thing to do...). Anyway, for all the people that practice in this disgusting behaviour - the pronunciation is.... (Hmmm - anyone know phonetics?) - "Li-nix" Note: Despite hating him for this - he is otherwise a very nice (but sometimes rather annoying) person. Now... to formally make this a "question" - Could someone write the phonetics for pronouncing "Linux", and also the notorious "Lye-nix", so I can make a note of it for future ventings? I think this is right... L?n?x, NOT L?n?x. ...or perhaps... L?n?x, NOT L?n?x* Can someone confirm the correct phonetics? (Listen to Linus on the matter).

  Read the article

• PC with 2 RAMs of different frequencies (1GB 533MHz + 2GB 667MHz) showing only 2GB RAM

  - by srinivas

  I have 6 years old PC with 1.25GB (1GB + 256MB) of DDR2 533MHz RAM. As computer has become very slow and memory usage reaching its limits most of the times, i decided to upgrade RAM. But unfortunately, im not finding retailers selling DDR2 533Mhz RAM near my area. Since I was not sure mixing up RAMs of different frequencies, i searched in web. Most results said they can be mixed but computer would run at lower frequency of the 2 RAMs. So I bought 2GB DDR2 667Mhz RAM expecting my pc to have 3GB RAM running at 533 MHz. But computer properties page shows only 2GB RAM. BIOS settings too show the slot with 2GB 667MHz as ACTIVE and other slot with 1GB 533MHz as "NOT INSTALLED". When I removed 2GB RAM, they computer shows only 1GB RAM. So for some reason, 1GB RAM is not getting detected/used. What is the problem here? thanks in advance.

  Read the article

• MacPro 1,1 video's card

  - by alexus

  I just bought a Mac Pro 1,1 from my coworkers and I'm looking to upgrade video card as the one inside is very noisy. What are my options? Basically I'm not looking to spend a lot of money, in fact i'd rather to spend as little as possible and get low end or mid range card, I'm not really playing games all that much so pretty much anything will do, I'd prefer 2xx series though. Current Mac Pro sells w/ GT120, Apple sells upgrade kit for $149 (which is okay, I just not sure if I'll be able to use this card on such an old Mac Pro)

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results. I also tried all the suggestions from this question Why doesn't Windows 7 wake up from sleep?. Still no results.

  Read the article

• How do I remove the Refresh button from the Address toolbar?

  - by Iszi

  I like being able to run commands straight from my Task Bar. So, I've enabled the Address toolbar on my new Windows 7 system - just like I had on my old XP system. However, the bar seems to have a mandatory minimum length (I've posted a separate question about that) that's a bit longer than I'd prefer. Additionally, a bit more horizontal space is consumed by a Refresh button at the end of it. This Refresh button appears similar to the Go button that used to show by default in older versions. That button was easily removed by changing a registry value that doesn't seem to exist in Windows 7. Is there a similar registry hack I can use to remove the new Refresh button?

  Read the article

• How to bulk mail-enable contacts from AD in Exchange 2007?

  - by George Hewitt

  Hello, We have several thousand 'contacts' setup in AD already for a faxing system. We're migrating to an online fax provider that uses e-mail rather than plain old telephone. So, we've bulk edited all the AD records so that the 'mail' attribute is populated with the right e-mail address in the right format. Now, how do we enable these contacts within Exchange 2007? I've looked through http://technet.microsoft.com/en-us/library/bb684891.aspx but that only seems to talk about manually editing the CSV output to specify the external addresses. AD already knows the external e-mail addresses - I just need the info in Exchange! Any thoughts?

  Read the article

• Clicks or ticks every minute when HDD is idle [closed]

  - by Ramy

  Possible Duplicate: Clicks or ticks every minute when HDD is idle My HDD is a My passport... It's 2 weeks old. I hear this tick or click followed by another one about 8-9 secs later, and they repeat every minute almost exactly... They usually happen and the LED light blinking.. It's not like the other clicks you hear that indicate any inevitable HDD failure, it's much lower in volume. I don't know what that is, however it's different than the rest of the HDD usual sounds...It's close to the sound of the mouse click. It sometimes also happens when I access a file on the drive mostly after being idle for a while, sometimes randomly not really sure... The drive though is working well, the SMART report comes out OK and without warning, and disk management shows it healthy... What could be the cause of this??

  Read the article

• Cannot open root device xvda1 or unknown-block(0,0)

  - by svoop

  I'm putting together a Dom0 and three DomU (all Gentoo) with kernel 3.5.7 and Xen 4.1.1. Each Dom has it's own md (md0 for Dom0, md1 for Dom1 etc). Dom0 works fine so far, however, I'm stuck trying to create DomUs. It appears the xvda1 device on DomU is not created or accessible: Parsing config file dom1 domainbuilder: detail: xc_dom_allocate: cmdline="root=/dev/xvda1 console=hvc0 root=/dev/xvda1 ro 3", features="(null)" domainbuilder: detail: xc_dom_kernel_mem: called domainbuilder: detail: xc_dom_boot_xen_init: ver 4.1, caps xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 domainbuilder: detail: xc_dom_parse_image: called domainbuilder: detail: xc_dom_find_loader: trying multiboot-binary loader ... domainbuilder: detail: loader probe failed domainbuilder: detail: xc_dom_find_loader: trying Linux bzImage loader ... domainbuilder: detail: xc_dom_malloc : 10530 kB domainbuilder: detail: xc_dom_do_gunzip: unzip ok, 0x2f7a4f -> 0xa48888 domainbuilder: detail: loader probe OK xc: detail: elf_parse_binary: phdr: paddr=0x1000000 memsz=0x558000 xc: detail: elf_parse_binary: phdr: paddr=0x1558000 memsz=0x690e8 xc: detail: elf_parse_binary: phdr: paddr=0x15c2000 memsz=0x127c0 xc: detail: elf_parse_binary: phdr: paddr=0x15d5000 memsz=0x533000 xc: detail: elf_parse_binary: memory: 0x1000000 -> 0x1b08000 xc: detail: elf_xen_parse_note: GUEST_OS = "linux" xc: detail: elf_xen_parse_note: GUEST_VERSION = "2.6" xc: detail: elf_xen_parse_note: XEN_VERSION = "xen-3.0" xc: detail: elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 xc: detail: elf_xen_parse_note: ENTRY = 0xffffffff815d5210 xc: detail: elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 xc: detail: elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" xc: detail: elf_xen_parse_note: PAE_MODE = "yes" xc: detail: elf_xen_parse_note: LOADER = "generic" xc: detail: elf_xen_parse_note: unknown xen elf note (0xd) xc: detail: elf_xen_parse_note: SUSPEND_CANCEL = 0x1 xc: detail: elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 xc: detail: elf_xen_parse_note: PADDR_OFFSET = 0x0 xc: detail: elf_xen_addr_calc_check: addresses: xc: detail: virt_base = 0xffffffff80000000 xc: detail: elf_paddr_offset = 0x0 xc: detail: virt_offset = 0xffffffff80000000 xc: detail: virt_kstart = 0xffffffff81000000 xc: detail: virt_kend = 0xffffffff81b08000 xc: detail: virt_entry = 0xffffffff815d5210 xc: detail: p2m_base = 0xffffffffffffffff domainbuilder: detail: xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff81000000 -> 0xffffffff81b08000 domainbuilder: detail: xc_dom_mem_init: mem 5000 MB, pages 0x138800 pages, 4k each domainbuilder: detail: xc_dom_mem_init: 0x138800 pages domainbuilder: detail: xc_dom_boot_mem_init: called domainbuilder: detail: x86_compat: guest xen-3.0-x86_64, address size 64 domainbuilder: detail: xc_dom_malloc : 10000 kB domainbuilder: detail: xc_dom_build_image: called domainbuilder: detail: xc_dom_alloc_segment: kernel : 0xffffffff81000000 -> 0xffffffff81b08000 (pfn 0x1000 + 0xb08 pages) domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x1000+0xb08 at 0x7fdec9b85000 xc: detail: elf_load_binary: phdr 0 at 0x0x7fdec9b85000 -> 0x0x7fdeca0dd000 xc: detail: elf_load_binary: phdr 1 at 0x0x7fdeca0dd000 -> 0x0x7fdeca1460e8 xc: detail: elf_load_binary: phdr 2 at 0x0x7fdeca147000 -> 0x0x7fdeca1597c0 xc: detail: elf_load_binary: phdr 3 at 0x0x7fdeca15a000 -> 0x0x7fdeca1cd000 domainbuilder: detail: xc_dom_alloc_segment: phys2mach : 0xffffffff81b08000 -> 0xffffffff824cc000 (pfn 0x1b08 + 0x9c4 pages) domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x1b08+0x9c4 at 0x7fdec91c1000 domainbuilder: detail: xc_dom_alloc_page : start info : 0xffffffff824cc000 (pfn 0x24cc) domainbuilder: detail: xc_dom_alloc_page : xenstore : 0xffffffff824cd000 (pfn 0x24cd) domainbuilder: detail: xc_dom_alloc_page : console : 0xffffffff824ce000 (pfn 0x24ce) domainbuilder: detail: nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) domainbuilder: detail: nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) domainbuilder: detail: nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) domainbuilder: detail: nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff827fffff, 20 table(s) domainbuilder: detail: xc_dom_alloc_segment: page tables : 0xffffffff824cf000 -> 0xffffffff824e6000 (pfn 0x24cf + 0x17 pages) domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x24cf+0x17 at 0x7fdece676000 domainbuilder: detail: xc_dom_alloc_page : boot stack : 0xffffffff824e6000 (pfn 0x24e6) domainbuilder: detail: xc_dom_build_image : virt_alloc_end : 0xffffffff824e7000 domainbuilder: detail: xc_dom_build_image : virt_pgtab_end : 0xffffffff82800000 domainbuilder: detail: xc_dom_boot_image: called domainbuilder: detail: arch_setup_bootearly: doing nothing domainbuilder: detail: xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches domainbuilder: detail: xc_dom_compat_check: supported guest type: xen-3.0-x86_32p domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_32 domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_32p domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_64 domainbuilder: detail: xc_dom_update_guest_p2m: dst 64bit, pages 0x138800 domainbuilder: detail: clear_page: pfn 0x24ce, mfn 0x37ddee domainbuilder: detail: clear_page: pfn 0x24cd, mfn 0x37ddef domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x24cc+0x1 at 0x7fdece675000 domainbuilder: detail: start_info_x86_64: called domainbuilder: detail: setup_hypercall_page: vaddr=0xffffffff81001000 pfn=0x1001 domainbuilder: detail: domain builder memory footprint domainbuilder: detail: allocated domainbuilder: detail: malloc : 20658 kB domainbuilder: detail: anon mmap : 0 bytes domainbuilder: detail: mapped domainbuilder: detail: file mmap : 0 bytes domainbuilder: detail: domU mmap : 21392 kB domainbuilder: detail: arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xbaa6f domainbuilder: detail: shared_info_x86_64: called domainbuilder: detail: vcpu_x86_64: called domainbuilder: detail: vcpu_x86_64: cr3: pfn 0x24cf mfn 0x37dded domainbuilder: detail: launch_vm: called, ctxt=0x7fff224e4ea0 domainbuilder: detail: xc_dom_release: called Daemon running with PID 4639 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.7-gentoo (root@majordomo) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #1 SMP Tue Nov 20 10:49:51 CET 2012 [ 0.000000] Command line: root=/dev/xvda1 console=hvc0 root=/dev/xvda1 ro 3 [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000138ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] MPS support code is not built-in. [ 0.000000] Using acpi=off or acpi=noirq or pci=noacpi may have problem [ 0.000000] DMI not present or invalid. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x139000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0x100000 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xffffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x138ffffff] [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000138ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x138ffffff] [ 0.000000] NODE_DATA [mem 0x1387fc000-0x1387fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x138ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x138ffffff] [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] e820: cannot find a gap in the 32bit address range [ 0.000000] e820: PCI devices with unassigned 32bit BARs may break! [ 0.000000] e820: [mem 0x139100000-0x1394fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.1 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880138400000 s75712 r8192 d22592 u2097152 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1259871 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/xvda1 console=hvc0 root=/dev/xvda1 ro 3 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 4943980k/5128192k available (3937k kernel code, 448k absent, 183764k reserved, 1951k data, 524k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 3411.602 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6823.20 BogoMIPS (lpj=3411602) [ 0.000999] pid_max: default: 32768 minimum: 301 [ 0.000999] Security Framework initialized [ 0.001355] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002974] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003441] Mount-cache hash table entries: 256 [ 0.003595] Initializing cgroup subsys cpuacct [ 0.003599] Initializing cgroup subsys freezer [ 0.003637] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003637] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003643] CPU: Physical Processor ID: 0 [ 0.003645] CPU: Processor Core ID: 0 [ 0.003702] SMP alternatives: switching to UP code [ 0.011791] Freeing SMP alternatives: 12k freed [ 0.011835] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.011886] Brought up 1 CPUs [ 0.011998] Grant tables using version 2 layout. [ 0.012009] Grant table initialized [ 0.012034] NET: Registered protocol family 16 [ 0.012328] PCI: setting up Xen PCI frontend stub [ 0.015089] bio: create slab <bio-0> at 0 [ 0.015158] ACPI: Interpreter disabled. [ 0.015180] xen/balloon: Initialising balloon driver. [ 0.015180] xen-balloon: Initialising balloon driver. [ 0.015180] vgaarb: loaded [ 0.016126] SCSI subsystem initialized [ 0.016314] PCI: System does not support PCI [ 0.016320] PCI: System does not support PCI [ 0.016435] NetLabel: Initializing [ 0.016438] NetLabel: domain hash size = 128 [ 0.016440] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.016447] NetLabel: unlabeled traffic allowed by default [ 0.016475] Switching to clocksource xen [ 0.017434] pnp: PnP ACPI: disabled [ 0.017501] NET: Registered protocol family 2 [ 0.017864] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.019322] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.020376] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.020497] TCP: Hash tables configured (established 524288 bind 65536) [ 0.020500] TCP: reno registered [ 0.020525] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.020564] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.020624] NET: Registered protocol family 1 [ 0.020658] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.020662] software IO TLB [mem 0xfb632000-0xff631fff] (64MB) mapped at [ffff8800fb632000-ffff8800ff631fff] [ 0.020750] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.021378] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.023378] msgmni has been set to 9656 [ 0.023544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.023549] io scheduler noop registered [ 0.023551] io scheduler deadline registered [ 0.023580] io scheduler cfq registered (default) [ 0.023650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.023845] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.024082] Non-volatile memory driver v1.3 [ 0.024085] Linux agpgart interface v0.103 [ 0.024207] Event-channel device installed. [ 0.024265] [drm] Initialized drm 1.1.0 20060810 [ 0.024268] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 0.025145] brd: module loaded [ 0.025565] loop: module loaded [ 0.045646] Initialising Xen virtual ethernet driver. [ 0.198264] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.199096] i8042: No controller found [ 0.199139] mousedev: PS/2 mouse device common for all mice [ 0.259303] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.259353] rtc_cmos: probe of rtc_cmos failed with error -38 [ 0.259440] md: raid1 personality registered for level 1 [ 0.259542] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.259732] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.259747] TCP: cubic registered [ 0.259886] NET: Registered protocol family 10 [ 0.260031] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.260070] sit: IPv6 over IPv4 tunneling driver [ 0.260194] NET: Registered protocol family 17 [ 0.260213] Bridge firewalling registered [ 5.360075] XENBUS: Waiting for devices to initialise: 25s...20s...15s...10s...5s...0s...235s...230s...225s...220s...215s...210s...205s...200s...195s...190s...185s...180s...175s...170s...165s...160s...155s...150s...145s...140s...135s...130s...125s...120s...115s...110s...105s...100s...95s...90s...85s...80s...75s...70s...65s...60s...55s...50s...45s...40s...35s...30s...25s...20s...15s...10s...5s...0s... [ 270.360180] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) [ 270.360273] md: Waiting for all devices to be available before autodetect [ 270.360277] md: If you don't use raid, use raid=noautodetect [ 270.360388] md: Autodetecting RAID arrays. [ 270.360392] md: Scanned 0 and added 0 devices. [ 270.360394] md: autorun ... [ 270.360395] md: ... autorun DONE. [ 270.360431] VFS: Cannot open root device "xvda1" or unknown-block(0,0): error -6 [ 270.360435] Please append a correct "root=" boot option; here are the available partitions: [ 270.360440] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 270.360444] Pid: 1, comm: swapper/0 Not tainted 3.5.7-gentoo #1 [ 270.360446] Call Trace: [ 270.360454] [<ffffffff813d2205>] ? panic+0xbe/0x1c5 [ 270.360459] [<ffffffff813d2358>] ? printk+0x4c/0x51 [ 270.360464] [<ffffffff815d5fb7>] ? mount_block_root+0x24f/0x26d [ 270.360469] [<ffffffff815d62b6>] ? prepare_namespace+0x168/0x192 [ 270.360474] [<ffffffff815d5ca7>] ? kernel_init+0x1b0/0x1c2 [ 270.360477] [<ffffffff815d5500>] ? loglevel+0x34/0x34 [ 270.360482] [<ffffffff813d5a64>] ? kernel_thread_helper+0x4/0x10 [ 270.360486] [<ffffffff813d4038>] ? retint_restore_args+0x5/0x6 [ 270.360490] [<ffffffff813d5a60>] ? gs_change+0x13/0x13 The config: name = "dom1" bootloader = "/usr/bin/pygrub" root = "/dev/xvda1 ro" extra = "3" # runlevel memory = 5000 disk = [ 'phy:/dev/md1,xvda1,w' ] # vif = [ 'ip=..., vifname=veth1' ] # none for now Here are some details on the Dom0 kernel (grepping for "xen"): CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=500 CONFIG_XEN_SAVE_RESTORE=y CONFIG_PCI_XEN=y CONFIG_XEN_PCIDEV_FRONTEND=y # CONFIG_XEN_BLKDEV_FRONTEND is not set CONFIG_XEN_BLKDEV_BACKEND=y # CONFIG_XEN_NETDEV_FRONTEND is not set CONFIG_XEN_NETDEV_BACKEND=y CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y # CONFIG_XEN_WDT is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # Xen driver support CONFIG_XEN_BALLOON=y # CONFIG_XEN_SELFBALLOONING is not set CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DEV_EVTCHN=y CONFIG_XEN_BACKEND=y CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=m CONFIG_XEN_GRANT_DEV_ALLOC=m CONFIG_SWIOTLB_XEN=y CONFIG_XEN_TMEM=y CONFIG_XEN_PCIDEV_BACKEND=m CONFIG_XEN_PRIVCMD=y CONFIG_XEN_ACPI_PROCESSOR=m And the DomU kernel (grepping for "xen"): CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=500 CONFIG_XEN_SAVE_RESTORE=y CONFIG_PCI_XEN=y CONFIG_XEN_PCIDEV_FRONTEND=y CONFIG_XEN_BLKDEV_FRONTEND=y CONFIG_XEN_NETDEV_FRONTEND=y CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y # CONFIG_XEN_WDT is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # Xen driver support CONFIG_XEN_BALLOON=y # CONFIG_XEN_SELFBALLOONING is not set CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DEV_EVTCHN=y # CONFIG_XEN_BACKEND is not set CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=m CONFIG_XEN_GRANT_DEV_ALLOC=m CONFIG_SWIOTLB_XEN=y CONFIG_XEN_TMEM=y CONFIG_XEN_PRIVCMD=y CONFIG_XEN_ACPI_PROCESSOR=m Any ideas what I'm doing wrong here? Thanks a lot!

  Read the article

• Lync Server 2010 with Hosted VoIP PBX

  - by kmehta

  We just deployed Lync Server 2010 in our organization and it is working great so far. The next step for us is to enable enterprise voice so that we can replace our telephones with service that is handled 100% by Lync. This is where I am at a loss. I have a fully deployed Standard Edition Lync server and a hosted VoIP PBX provider with VoIP handsets. I would like to get rid of the handsets and have my company's phone service be handled by Lync client (e.g. someone calls my work number, and Lync rings instead of my old handset that is set up with the PBX) I am new to deploying these types of features. Any help is appreciated. Thanks.

  Read the article

• How to connect a wifi router to a cable modem router?

  - by DavidD

  Here's the thing: I have a cable modem router (Thomson TCW710) with wifi-g that I rent from my cable company. I would like to use a wireless-n router (D-Link DIR-655, that I received for free) with it in order to take advantage of the faster wifi. I basically need advice on how to architecture my home network with these two beasts. What configuration should I need to apply on my old and new router to make it all work? The two routers will of course be connected together with a RJ-45 cable.

  Read the article

• Installing MFC (vs2005) application on Windows 2008 R2 64

  - by olich

  I've build an application that runs on Windows 2003, it is an old style MFC application. Today I need to install the application on a Windows 2008 R2 64 system. I have failures during installation and the application does not run. The application is build with VisualStudio2005, and uses COM objects. The MSI register the objects but it fails with the error code : HRESULT -2147010895. Any idea why the COM registration failed? I've tried to install the "Microsoft Visual C++ 2005 Redistributable Package (x86)" but it doesn't help. I've tried to register the COM objects with the regsvr32 after the installation but sadly it doesn't help. I've tries to install the application on Windows 2008 R2 32, and it works perfectly. I am quite new with 64 systems, so any help will be appreciated. tia olich

  Read the article

• Minimum Requirements for (open) Solaris?

  - by Electrons_Ahoy

  I'm thinking about knocking together a Solaris box at home to act as a combination server and learning exercise. What are the minimum hardware specs I can throw at it such that it'll be actually usable? I'd be cobbling the machine together from a stack of various x86 PC spares/leftovers. Does anyone have experience with Solaris at the lower end of the spectrum? The Sun site, for example, claims it'll run with as little as 255 megs of ram, but is it worth the exercise with less than a gig? Will my old Pentium II 450 cut the mustard? (I'm willing to throw a couple of bucks at pricewatch/mwave/newegg on this, but if I need to build a better rig than my main PC, I may not bother.)

  Read the article

• Using Windows 7 XP Mode for games

  - by Josefvz

  Hi all. I have Win 7 (x64) at home and I want to play some old games (specifically Lands of Lore 3, but also some others). This game does not work properly on Win 7, and there are no patches that I'm aware of to fix its issues. Can I use XP Mode to play this game (and other non Win 7 nice games), or is there a better way? I only have one PC and dual booting scares me... (so no to dual booting!) Another question: Will I have full hardware support (full use of my graphics card, etc) when I use DOSbox or a VM? I have decided to go with VirtualBox or vmware, I'll check which one gives the best performance, thanks for your input!

  Read the article

• Function key emulator for Dell inspiron 6400 on external keyboard

  - by hardik988

  I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

  Read the article

• Best memory-efficient web browser for Ubuntu?

  - by Steve K

  I've installed Ubuntu 10.10 on an old laptop with only 756 MB of RAM, Pentium M 1.6 processor. I'm using Google Chrome 11.0 (dev channel) for web browsing, and it appears to be using up most of my memory and processor time. Does anyone know of a better browser than Chrome on Ubuntu, for an older computer like mine? I'm new to Ubuntu, so there may also be tweaks I can make to my existing system to have it perform better. But right now it's pretty slow when I've got ~5-10 tabs open. Related question: memory-efficient web-browser

  Read the article

• Motherboard RAM question.

  - by winterwindz

  Firstly I'm new at this. Not a very computer-ish person. So I very much apologize if this is not the right place, but here it goes.. My Motherboard is an Asus P5LD2-SE. I'm running in Win 7 Ultimate 32-bit(x86) OS, 1GB RAM (2x512 MB). I'm planning to upgrade my OS to 64-bit and because I know my Motherboard is a dual-channel, I bought a dual-channel 2 GB RAM (2 pcs). My question is; am I still able use my old RAM ones, since it is 4 slots..? Which in the end will show 5GB. Is it possible? Thank you for your time. =)

  Read the article

• Finding proof of server being compromised by Black Hole Toolkit exploit

  - by cosmicsafari

  I recently took over maintenance of a company server. (Just Host, C Panel, Linux server), theres a tonne of websites on it which i know nothing about. It had came to my attention that a client had attempted to access one of the websites hosted on this server and was met with a warning from windows defender. It had blocked access because it said the website had been compromised by the Black Hole Toolkit or something to that effect. Anyway I went in and updated various plugins and deleted some old suspect websites. I have since ran the website in question through a few online malware scanners and its comes up clean everytime. However im not convinced. Do any of you guys know extensive ways i can check that the server isn't still compromised. I have no way to install any malware scanners or anti virus programs on the server as it is horribly locked down by Just Host.

  Read the article

• Time machine folders won't restore recursively

  - by Brian Postow

  I have a Snow Leopard system with Time Machine. Every so often I need to look at an old folder, so I go in and try to restore it, usually to a different location. What I end up with is an empty folder of the appropriate name. none of the files, nothing. It doesn't give any error messages. The files ARE there, because I can see them, also, if I go in via the mount point, and trace down through the file system, I can do a filecopy of the folder, and everything turns out fine. However, that seems like a bad idea. so, I'd like to know why he "right" way doesn't work... I believe that it used to work. It's also possible that it only doesn't work for certain folders. I haven't tested extensively.

  Read the article

• How can I accurately determine the age of a hard drive?

  - by Todd Stout

  Yes, if it's large, heavy, and only 65 Meg in capacity, you can assume it's ancient. An RLL controller would positively indicate the drive is from antiquity. What about drives that are only 3 or 4 years old? If I know the serial number, make and model is there a public database that indicates a manufacturing date? Update: As trite as this question might seem to some, the hard drive I was looking at that precipitated this question had no obvious manufacturing date stamped on it. I realize that most do. I think the answers given are very useful to myself and others.

  Read the article

• Virtual Server 2005 R2 kungfu

  - by AngryHacker

  Does Virtual Server 2005 R2 have a command line interface, that's versatile enough? Here is a situation. I run a Win2k VM on an old memory constrained machine. I allocate it 378MB of RAM and the VM runs just fine. Once a month, inside the VM, I backup the (a very large) database, compress it using 7Zip and ftp it to the backup site (all in a script). Unfortunately the compression part takes a massive amount of RAM (far exceeding the 378MB), it goes for the paging file and brings absolutely everything to a crawl and literally takes 2-3 days, if left unattended. So to fix this, I have to shutdown the VM, give it temporarily 768MB of RAM and then the whole thing finishes in 20 minutes. So, is there a way do the following automatically from the host machine in a script? Shutdown the guest OS (I think, I got this part) Change the RAM allocation from 378 to 768 Start the guest OS again then, 1 hour later, do everything in reverse.

  Read the article

< Previous Page | 685 686 687 688 689 690 691 692 693 694 695 696  | Next Page >