Search Results

Search found 1729 results on 70 pages for 'bi publisher'.

Page 69/70 | < Previous Page | 65 66 67 68 69 70  | Next Page >

  • PASS: Bylaw Changes

    - by Bill Graziano
    While you’re reading this, a post should be going up on the PASS blog on the plans to change our bylaws.  You should be able to find our old bylaws, our proposed bylaws and a red-lined version of the changes.  We plan to listen to feedback until March 31st.  At that point we’ll decide whether to vote on these changes or take other action. The executive summary is that we’re adding a restriction to prevent more than two people from the same company on the Board and eliminating the Board’s Officer Appointment Committee to have Officers directly elected by the Board.  This second change better matches how officer elections have been conducted in the past. The Gritty Details Our scope was to change bylaws to match how PASS actually works and tackle a limited set of issues.  Changing the bylaws is hard.  We’ve been working on these changes since the March board meeting last year.  At that meeting we met and talked through the issues we wanted to address.  In years past the Board has tried to come up with language and then we’ve discussed and negotiated to get to the result.  In March, we gave HQ guidance on what we wanted and asked them to come up with a starting point.  Hannes worked on building us an initial set of changes that we could work our way through.  Discussing changes like this over email is difficult wasn’t very productive.  We do a much better job on this at the in-person Board meetings.  Unfortunately there are only 2 or 3 of those a year. In August we met in Nashville and spent time discussing the changes.  That was also the day after we released the slate for the 2010 election. The discussion around that colored what we talked about in terms of these changes.  We talked very briefly at the Summit and again reviewed and revised the changes at the Board meeting in January.  This is the result of those changes and discussions. We made numerous small changes to clean up language and make wording more clear.  We also made two big changes. Director Employment Restrictions The first is that only two people from the same company can serve on the Board at the same time.  The actual language in section VI.3 reads: A maximum of two (2) Directors who are employed by, or who are joint owners or partners in, the same for-profit venture, company, organization, or other legal entity, may concurrently serve on the PASS Board of Directors at any time. The definition of “employed” is at the sole discretion of the Board. And what a mess this turns out to be in practice.  Our membership is a hodgepodge of interlocking relationships.  Let’s say three Board members get together and start a blog service for SQL Server bloggers.  It’s technically for-profit.  Let’s assume it makes $8 in the first year.  Does that trigger this clause?  (Technically yes.)  We had a horrible time trying to write language that covered everything.  All the sample bylaws that we found were just as vague as this. That led to the third clause in this section.  The first sentence reads: The Board of Directors reserves the right, strictly on a case-by-case basis, to overrule the requirements of Section VI.3 by majority decision for any single Director’s conflict of employment. We needed some way to handle the trivial issues and exercise some judgment.  It seems like a public vote is the best way.  This discloses the relationship and gets each Board member on record on the issue.   In practice I think this clause will rarely be used.  I think this entire section will only be invoked for actual employment issues and not for small side projects.  In either case we have the mechanisms in place to handle it in a public, transparent way. That’s the first and third clauses.  The second clause says that if your situation changes and you fall afoul of this restriction you need to notify the Board.  The clause further states that if this new job means a Board members violates the “two-per-company” rule the Board may request their resignation.  The Board can also  allow the person to continue serving with a majority vote.  I think this will also take some judgment.  Consider a person switching jobs that leads to three people from the same company.  I’m very likely to ask for someone to resign if all three are two weeks into a two year term.  I’m unlikely to ask anyone to resign if one is two weeks away from ending their term.  In either case, the decision will be a public vote that we can be held accountable for. One concern that was raised was whether this would affect someone choosing to accept a job.  I think that’s a choice for them to make.  PASS is clearly stating its intent that only two directors from any one organization should serve at any time.  Once these bylaws are approved, this policy should not come as a surprise to any potential or current Board members considering a job change.  This clause isn’t perfect.  The biggest hole is business relationships that aren’t defined above.  Let’s say that two employees from company “X” serve on the Board.  What happens if I accept a full-time consulting contract with that company?  Let’s assume I’m working directly for one of the two existing Board members.  That doesn’t violate section VI.3.  But I think it’s clearly the kind of relationship we’d like to prevent.  Unfortunately that was even harder to write than what we have now.  I fully expect that in the next revision of the bylaws we’ll address this.  It just didn’t make it into this one. Officer Elections The officer election process received a slightly different rewrite.  Our goal was to codify in the bylaws the actual process we used to elect the officers.  The officers are the President, Executive Vice-President (EVP) and Vice-President of Marketing.  The Immediate Past President (IPP) is also an officer but isn’t elected.  The IPP serves in that role for two years after completing their term as President.  We do that for continuity’s sake.  Some organizations have a President-elect that serves for one or two years.  The group that founded PASS chose to have an IPP. When I started on the Board, the Nominating Committee (NomCom) selected the slate for the at-large directors and the slate for the officers.  There was always one candidate for each officer position.  It wasn’t really an election so much as the NomCom decided who the next person would be for each officer position.  Behind the scenes the Board worked to select the best people for the role. In June 2009 that process was changed to bring it line with what actually happens.  An Officer Appointment Committee was created that was a subset of the Board.  That committee would take time to interview the candidates and present a slate to the Board for approval.  The majority vote of the Board would determine the officers for the next two years.  In practice the Board itself interviewed the candidates and conducted the elections.  That means it was time to change the bylaws again. Section VII.2 and VII.3 spell out the process used to select the officers.  We use the phrase “Officer Appointment” to separate it from the Director election but the end result is that the Board elects the officers.  Section VII.3 starts: Officers shall be appointed bi-annually by a majority of all the voting members of the Board of Directors. Everything else revolves around that sentence.  We use the word appoint but they truly are elected.  There are details in the bylaws for term limits, minimum requirements for President (1 prior term as an officer), tie breakers and filling vacancies. In practice we will have an election for President, then an election for EVP and then an election for VP Marketing.  That means that losing candidates will be able to fall down the ladder and run for the next open position.  Another point to note is that officers aren’t at-large directors.  That means if a current sitting officer loses all three elections they are off the Board.  Having Board member votes public will help with the transparency of this approach. This process has a number of positive and negatives.  The biggest concern I expect to hear is that our members don’t directly choose the officers.  I’m going to try and list all the positives and negatives of this approach. Many non-profits value continuity and are slower to change than a business.  On the plus side this promotes that.  On the negative side this promotes that.  If we change too slowly the members complain that we aren’t responsive.  If we change too quickly we make mistakes and fail at various things.  We’ve been criticized for both of those lately so I’m not entirely sure where to draw the line.  My rough assumption to this point is that we’re going too slow on governance and too quickly on becoming “more than a Summit.”  This approach creates competition in the officer elections.  If you are an at-large director there is no consequence to losing an election.  If you are an officer the only way to stay on the Board is to win an officer election or an at-large election.  If you are an officer and lose an election you can always run for the next office down.  This makes it very easy for multiple people to contest an election. There is value in a person moving through the officer positions up to the Presidency.  Having the Board select the officers promotes this.  The down side is that it takes a LOT of time to get to the Presidency.  We’ve had good people struggle with burnout.  We’ve had lots of discussion around this.  The process as we’ve described it here makes it possible for someone to move quickly through the ranks but doesn’t prevent people from working their way up through each role. We talked long and hard about having the officers elected by the members.  We had a self-imposed deadline to complete these changes prior to elections this summer. The other challenge was that our original goal was to make the bylaws reflect our actual process rather than create a new one.  I believe we accomplished this goal. We ran out of time to consider this option in the detail it needs.  Having member elections for officers needs a number of problems solved.  We would need a way for candidates to fall through the election.  This is what promotes competition.  Without this few people would risk an election and we’ll be back to one candidate per slot.  We need to do this without having multiple elections.  We may be able to copy what other organizations are doing but I was surprised at how little I could find on other organizations.  We also need a way for people that lose an officer election to win an at-large election.  Otherwise we’ll have very little competition for officers. This brings me to an area that I think we as a Board haven’t done a good job.  We haven’t built a strong process to tell you who is doing a good job and who isn’t.  This is a double-edged sword.  I don’t want to highlight Board members that are failing.  That’s not a good way to get people to volunteer and run for the Board.  But I also need a way let the members make an informed choice about who is doing a good job and would make a good officer.  Encouraging Board members to blog, publishing minutes and making votes public helps in that regard but isn’t the final answer.  I don’t know what the final answer is yet.  I do know that the Board members themselves are uniquely positioned to know which other Board members are doing good work.  They know who speaks up in meetings, who works to build consensus, who has good ideas and who works with the members.  What I Could Do Better I’ve learned a lot writing this about how we communicated with our members.  The next time we revise the bylaws I’d do a few things differently.  The biggest change would be to provide better documentation.  The March 2009 minutes provide a very detailed look into what changes we wanted to make to the bylaws.  Looking back, I’m a little surprised at how closely they matched our final changes and covered the various arguments.  If you just read those you’d get 90% of what we eventually changed.  Nearly everything else was just details around implementation.  I’d also consider publishing a scope document defining exactly what we were doing any why.  I think it really helped that we had a limited, defined goal in mind.  I don’t think we did a good job communicating that goal outside the meeting minutes though. That said, I wish I’d blogged more after the August and January meeting.  I think it would have helped more people to know that this change was coming and to be ready for it. Conclusion These changes address two big concerns that the Board had.  First, it prevents a single organization from dominating the Board.  Second, it codifies and clearly spells out how officers are elected.  This is the process that was previously followed but it was somewhat murky.  These changes bring clarity to this and clearly explain the process the Board will follow. We’re going to listen to feedback until March 31st.  At that time we’ll decide whether to approve these changes.  I’m also assuming that we’ll start another round of changes in the next year or two.  Are there other issues in the bylaws that we should tackle in the future?

    Read the article

  • CodePlex Daily Summary for Saturday, January 29, 2011

    CodePlex Daily Summary for Saturday, January 29, 2011Popular ReleasesRawr: Rawr 4.0.17 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 and on the Version Notes page: http://rawr.codeplex.com/wikipage?title=VersionNotes As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you...VivoSocial: VivoSocial 7.4.2: Version 7.4.2 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.4.2 release and see if they persist. If you have any questions about this release, please post them in our Support forums. If you are experiencing a bug or would like to request a new feature, please submit it to our issue tracker. Web Controls * Updated Business Objects and added a new SQL Data Provider File. Groups * Fixed a security issue whe...PHP Manager for IIS: PHP Manager 1.1.1 for IIS 7: This is a minor release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus several bug fixes (see change list for more details). Also, this release includes Russian language support. SHA1 codes for the downloads are: PHPManagerForIIS-1.1.0-x86.msi - 6570B4A8AC8B5B776171C2BA0572C190F0900DE2 PHPManagerForIIS-1.1.0-x64.msi - 12EDE004EFEE57282EF11A8BAD1DC1ADFD66A654BloodSim: WControls.dll update: Priority Update It's just come to my attention that the latest version of WControls.dll was not included in the 1.4 release and as a result, BloodSim has been unuseable. Please download WControls.dll from here, and this will rectify the issue.VFPX: VFP2C32 2.0.0.8 Release Candidate: This release includes several bugfixes, new functions and finally a CHM help file for the complete library.DB>doc for Microsoft SQL Server: 1.0.0.0: Initial release Supported output HTML WikiPlex markup Raw XML Supported objects Tables Primary Keys Foreign Keys ViewsmojoPortal: 2.3.6.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2361-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Office Web.UI: Alpha preview: This is the first alpha release. Very exciting moment... This download is just the demo application : "Contoso backoffice Web App". No source included for the moment, just the app, for testing purposes and for feedbacks !! This package includes a set of official MS Office icons (143 png 16x16 and 132 png 32x32) to really make a great app ! Please rate and give feedback ThanksParallel Programming with Microsoft Visual C++: Drop 6 - Chapters 4 and 5: This is Drop 6. It includes: Drafts of the Preface, Introduction, Chapters 2-7, Appendix B & C and the glossary Sample code for chapters 2-7 and Appendix A & B. The new material we'd like feedback on is: Chapter 4 - Parallel Aggregation Chapter 5 - Futures The source code requires Visual Studio 2010 in order to run. There is a known bug in the A-Dash sample when the user attempts to cancel a parallel calculation. We are working to fix this.Catel - WPF and Silverlight MVVM library: 1.1: (+) Styles can now be changed dynamically, see Examples application for a how-to (+) ViewModelBase class now have a constructor that allows services injection (+) ViewModelBase services can now be configured by IoC (via Microsoft.Unity) (+) All ViewModelBase services now have a unit test implementation (+) Added IProcessService to run processes from a viewmodel with directly using the process class (which makes it easier to unit test view models) (*) If the HasErrors property of DataObjec...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.160: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release improves NodeXL's Twitter and Pajek features. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file in Windows Explorer and select "Extract All." Close Ex...Kooboo CMS: Kooboo CMS 3.0 CTP: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL, RavenDB and SQLCE. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder to enable...UOB & ME: UOB ME 2.6: UOB ME 2.6????: ???? V1.0: ???? V1.0 ??Password Generator: 2.2: Parallel password generation Password strength calculation ( Same method used by Microsoft here : https://www.microsoft.com/protect/fraud/passwords/checker.aspx ) Minor code refactoringVisual Studio 2010 Architecture Tooling Guidance: Spanish - Architecture Guidance: Francisco Fagas http://geeks.ms/blogs/ffagas, Microsoft Most Valuable Professional (MVP), localized the Visual Studio 2010 Quick Reference Guidance for the Spanish communities, based on http://vsarchitectureguide.codeplex.com/releases/view/47828. Release Notes The guidance is available in a xps-only (default) or complete package. The complete package contains the files in xps, pdf and Office 2007 formats. 2011-01-24 Publish version 1.0 of the Spanish localized bits.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.2: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager the html generation has been optimized, the html page size is much smaller nowFacebook Graph Toolkit: Facebook Graph Toolkit 0.6: new Facebook Graph objects: Application, Page, Post, Comment Improved Intellisense documentation new Graph Api connections: albums, photos, posts, feed, home, friends JSON Toolkit upgraded to version 0.9 (beta release) with bug fixes and new features bug fixed: error when handling empty JSON arrays bug fixed: error when handling JSON array with square or large brackets in the message bug fixed: error when handling JSON obejcts with double quotation in the message bug fixed: erro...Microsoft All-In-One Code Framework: Visual Studio 2008 Code Samples 2011-01-23: Code samples for Visual Studio 2008MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (3): Instructions for installation: http://www.galasoft.ch/mvvm/installing/manually/ Includes the hotfix templates for Windows Phone 7 development. This is only relevant if you didn't already install the hotfix described at http://blog.galasoft.ch/archive/2010/07/22/mvvm-light-hotfix-for-windows-phone-7-developer-tools-beta.aspx.New ProjectsAsp.Net MvcRoute Debugger Visualizer: Asp.Net MvcRoute Debugger Visualizer is an extension for Visual Studio 2010.It displays the matched route data and datatokens of all defined routes in your mvc applicationAutoLaunch for Windows Embedded Compact (CE): AutoLaunch component for Windows Embedded CE 6.0 and Windows Embedded Compact 7BicubicResizeSilverlight: A client-side Silverlight library for performing a bicubic resize. Cloud Monitoring Studio: Cloud Monitoring Studio provides real-time performance monitoring mechanism for Azure deployed applications/Azure roles with the help of easy-to-understand graphs. Users can configure required performance counters for individual Azure roles through easy-to-use & intuitive GUI.CoreCon for Windows Embedded Compact (CE): CoreCon component for Windows Embedded CE 6.0 and Windows Embedded Compact 7, to simplify the tasks needed to include CoreCon files to the OS image.DokanDiscUtils Bridge: This a a bridge for the Dokan library and the DiscUtils library that allows Any partition/image that discutils can open to be mounted using dokanEverything About My Share: Everything About My ShareExtraordinary Ideas: This project contains some Extra oradinary solutions for difficult software problems.. Article's are in Turkish Language tahircakmak.blogspot.comIE9 Helper: The IE9 Helper is an ASP.NET Helper to makes adding IE9 features simple.ITSolutions: .NET Sandbox SolutionsKitty - Async Server: Kitty is an Async Server with C# and Java versions. It builds on Parallelism to deliver a Internet Scale Server StarterKit.mediainfocollector: Retrieves info from mediafilesMini - Async WebSocket Server: Mini is an Async WebSocket Server with versions in C# and Java. It builds on Parallelism and Kitty to deliver an Internet Scale WebSocket Server StarterKit. MVC N-tier EMR Sample Application: This sample uses EMR to showcase a MVC N-Tier application. It uses WCF to separate the presentation from the DB/Backend.MyPhotoGallery: MyPhotoGallery is a photo gallery developed in ASP.Net MVC.NuGet: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development.OneCode CodeBox: OneCode CodeBoxonecode toolkit: toolsOrchard SSL: Orchard Secured Sockets Layer (SSL) adds new features to force the usage of SSL in sections like authentication pages or the dashboard.OrchardCMS - Lokalizacija: OrchardCMS - Lokalizacija je projekat lokalizacije Orchard CMS-a na srpski, hrvatski, srpskohrvatski, hrvatskosrpski i sve ostale jezike sa podrucija ex-YU. Pokušacemo da iskorisitmo slicnosti u jezicima kako bi jedni drugima pomogli i olakšali lokalizaciju Orchard-a. Pyxis Install Maker: This utility creates single file installs for Pyxis 2 applications.SaleCard: TestSharePoint Social Networking: A Collection of solutions aimed at adding social network to your SharePoint 2010 site. The collection will include web parts, ribbon extensions and other type of solutions that will add or enhance the social networking capabilities of SharePoint. The solution is written in c#.SmartScreenTerminator: Pissed off by the stupid "smart screen" asking you to "remember to protect your password" every time you click someone else's blog link in your Windows Live homepage? Use this three line appication to allow your IE to automatically navigate to the destination page.StreetScene: StreetScene is a sample project showing how to use Microsoft technologies such as ASP.NET, Azure and Silverlight to build rich applications.svmnetx: testtest_project: test projectTweet-Links: Tweet-Links is designed for ultra-fast sending a twitter selected text and files and images.WCMF - Windows Content Management Framework: WCMF is a framework that allows one to build CMS appllications that target the Windows platform (whereas a typical CMS system is usually web based). Used technologies are MEF, WCF, WPF (including Silverlight) and Caliburn.Micro.WebNoteAOP: A sample project for aspect oriented programming with PostSharp. The main purpose is a short introduction. All aspects are made in a very simple way. They should be useful for simple applications. Please keep in mind, that complex problems often require a complex solution, too.

    Read the article

  • CodePlex Daily Summary for Thursday, November 22, 2012

    CodePlex Daily Summary for Thursday, November 22, 2012Popular ReleasesStackBuilder: StackBuilder 1.0.11.0: +Added Box/Case analysis...VidCoder: 1.4.7 Beta: Added view modes to the Preview window. Now you can see the image in 1:1 or in "Corners" mode to show a close-up of cropping results. Added the ability to set a custom completion sound. Gave the encoding settings command bar a more distinctive background color and extended it to the whole width of the window. Added the preview button to the command bar. Rearranged UI in Video tab and added back the section headers. Added the "Most" choice for the advanced x264 analysis option. Updat...ServiceMon - Extensible Real-time, Service Monitoring Utility for Windows: ServiceMon Release 1.2.0.58: Auto-uploaded from build serverImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????(◇?◆:)。 -???????????????????RecoverPropertiesFromJObject????(〓?〓、????、??、Vian_Pan)。 -????????????,?????????????,???SelectedValueArray???????(sam.chang)。 -??Alert.Show???????????(swtseaman)。 -???????????????,??Icon??IconUrl????(swtseaman)。 -?????????TimePicker(??)。 -?????????,??/res.axd?css=blue.css&v=1。 -????????,?????????????,???????。 -????MenuCheckBox(???????)。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...New Projects1122case1325: It is a codeplex project1122case1327: Never be so greedy Accommodation Portal: This is a skeleton web site for holiday home owners, who wishes to rent their holiday accommodations to visitors from around the world. Analog Clock: This is project contains analog clock made in win forms.Android Socket Plus: ????Android??????。???????Android???????Socket???,?????????(?PC?Windows????????)??????Socket???,??,????????????;??????????????Socket???,??????????????Socket???。Bancosol: PFCBig Data Twitter Demo: This demo analyzes tweets in real-time, even including a dashboard. The tweets are also archived in Azure DB/Blob and Hadoop where Excel can be used for BI!Cloud For Science: This project serves as issue tracker for C4S components, and is used by participants of the C4S project. cwt: cwtDiary Application for Elementary Student: A Simple Diary Application Made for Elementary Student. Dice Dreams: Dice Dreams Dice Dreams is a dice game , the player must get 1.000.000 point to win, you start with 100.000 point. Dynamic Entity Framework Filtering: Generates linq to Entity Framework Queries by examining the EF data model, thus allowing for code reduction for queries to commonly requested entities.EazyErp: Enterprise Resource Planning System of Vf AsiaGoPlay: Tooke - add a project description here...HMyBlog: myblogHumanitarian Toolbox: This project is the publication site for bits built by the Humanitarian Toolbox ( http://humanitariantoolbox.net/).Impulse Media Player: Impulse Media Player is the ultimate media player for WindowsInspiration.Web: Description: A simple (but entertaining) ASP.NET MVC (C#) project to suggest random code names for projects. Intended audience: People who need a name (any name) to get started with their projects. Application written during Webcamp Singapore (4th Jun 2010 - 5th Jun 2010).iPictureUploader: Simple tool to upload images onto WEB and share via blogs/forums/etc lugionline: test projectMosaic Snake 3D: A clone of the popular Snake game for Windows 8. It contains a simple 3D engine based on SharpDX and is completely written in C# and Xaml.Outage Display: A simple web-based outage displayPrestaShop free Electronic Brown Shop Template - ModuleBazaar: Check out Latest and Best Featured PrestaShop Templates, Modules Magento Extensions, Opencart Extensions, Clone scripts from ModuleBazaarRackspace Cloud Files Manager: A simple Rackspace Cloud Files manager for static websitesRoll The Dice: Roll The Dice is a simple game developed by Erika Enggar Savitri and Queen Anugerah Aguslia who are currently studying Information System at Ma Chung UniversityRussian IDM: Russian IDM is free IdM solutionshootout: Comparing the speed of different languages and the constructs available within those languagessmart messaging connector: Sending fax from a PrintDocument or a file. Sending broadcast fax. Managing (Pause/Resume/Restart) current fax job. Managing configuration of the fax serverTeen Diary: Teen Diary Software - FREEWARE SOFTWARE. - SIMPLE, LIGHTWEIGHT, PORTABLE, COMPATIBLE. - made from .NET FRAMEWORK languange with XML data. Tekapo: Tekapo is a wizard style application that will help you manage your digital photos. Most digital cameras will store images as JPEG files. Information about the camera and how the camera has taken the photo is placed into the JPEG file along with the image data. One of the pieces of information stored is the date and time that the photo was taken. Tekapo uses the picture taken date to organise the photos.The Byte Kitchen's Open Sources: This project is related to The Byte Kitchen Blog (at thebytekitchen.com). It typically deals with Windows 8 apps, DirectX, and the Kinect for Windows.TheDiary: daily-self journalWCFsample: WCFsampleXNA Game Editor: This project will has familiar features like Unity Engine Editor.

    Read the article

  • SSRS Export to Excel not working through VPN (Juniper SA4000)

    - by Veynom
    We have a SharePoint (MOSS 2007 on Win2003 R2) with SSRS reports (from SQL 2005) embedded in it. When we connect to the SharePoint portal through our VPN (firewall is Juniper SA4000) and using Internet Explorer (6, 7, and 8) and try to export any SSRS report under Excel, we get an error message: Internet Explorer cannot download . Internet Explorer was not able to open the internet site. The requested site is either unavailable or cannot be found. Please try again later. When not using the VPN (LAN from the office), everything (exporting under Excel) works fine. When using Firefox through the VPN, it works fine. When exporting to any other format (pdf or text or whatever), everything is fine under both IE and FF. Our firewall people suspect something in SSRS/MOSS/Office. Our MOSS consultants suspect something in the firewall Juniper SA4000. When using Fiddler and when not connected through VPN, I see the following traffic once i click on the "Export button": (Response was a request for client credentials) GET /ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=j1pqbvbqkb34qf45fhlgnx55&ControlID=733607a7d607476abb1e6b8794202158&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL HTTP/1.1 Accept: */* Accept-Language: en-US,fr-be;q=0.5 User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB5; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; MS-RTC LM 8; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: r1frchcurdb01.r1.group.corp HTTP/1.1 401 Unauthorized Content-Length: 1656 Content-Type: text/html Server: Microsoft-IIS/6.0 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM X-Powered-By: ASP.NET Date: Mon, 08 Jun 2009 09:25:21 GMT Proxy-Support: Session-Based-Authentication then (Generic Response successful): GET /ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=j1pqbvbqkb34qf45fhlgnx55&ControlID=733607a7d607476abb1e6b8794202158&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL HTTP/1.1 Accept: */* Accept-Language: en-US,fr-be;q=0.5 User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB5; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; MS-RTC LM 8; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: r1frchcurdb01.r1.group.corp Authorization: Negotiate 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 HTTP/1.1 200 OK Date: Mon, 08 Jun 2009 09:25:21 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET WWW-Authenticate: Negotiate oYGgMIGdoAMKAQChCwYJKoZIgvcSAQICooGIBIGFYIGCBgkqhkiG9xIBAgICAG9zMHGgAwIBBaEDAgEPomUwY6ADAgEXolwEWm70xlMp4oj/PyvriNMeNDigow6/MX2DpaYQdBfGkiF0Dcc323tHLRBxBL03QpvwdGBxZGAJI6V1G8sc/lVBzhlCNsZkbJcNfnMNgOgc7UPrz+ZVav/EVm3sDQ== X-AspNet-Version: 2.0.50727 Content-Disposition: attachment; filename="Product Application Report.xls" Cache-Control: private Expires: Mon, 08 Jun 2009 09:24:21 GMT Content-Type: application/vnd.ms-excel Content-Length: 23012 When using the VPN, I see no traffic in Fiddler and the error message is displayed before anything else. Update 17/06/2009: I could get a hand on some logs from our SA4000. Maybe this could help more. Info PTR23232 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Start Policy [WEBURL/PROTOCOL] evaluation for resource http://<DB server>:80/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=rua1g355tic24245f2e13lim&ControlID=44168efcd36e461493f7a69962580b91&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Enable HTTP 1.1]... Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://nsrvnts2:80/*] does not match Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://nsrvnts3:80/*] does not match Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Disable HTTP 1.1]... Info PTR23239 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Action [HTTP 1.0] is returned Info PTR23234 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Policy [Disable HTTP 1.1] applies to resource Info PTR23308 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Skip Policy [WEBURL/COMPRESSION] evaluation because Compression option is not enabled Info PTR23232 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Start Policy [WEBURL/WEBPDSID] evaluation for resource http://<DB server>:80/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=rua1g355tic24245f2e13lim&ControlID=44168efcd36e461493f7a69962580b91&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Corporate BI Portal]... Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://<SharePoint>:80/*] does not match Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://<SharePoint>/*] does not match Info PTR23235 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - No Policy applies to resource Any tip welcome. :)

    Read the article

  • High Server Load cannot figure out why

    - by Tim Bolton
    My server is currently running CentOS 5.2, with WHM 11.34. Currently, we're at 6.43 to 12 for a load average. The sites that we're hosting are taking a lot time to respond and resolve. top doesn't show anything out of the ordinary and iftop doesn't show a lot of traffic. We have many resellers, and some not so good at writing code, how can we find the culprit? vmstat output: vmstat procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 2 84 78684 154916 1021080 0 0 72 274 0 14 6 3 80 12 0 top output (ordered by %CPU) top - 21:44:43 up 5 days, 10:39, 3 users, load average: 3.36, 4.18, 4.73 Tasks: 222 total, 3 running, 219 sleeping, 0 stopped, 0 zombie Cpu(s): 5.8%us, 2.3%sy, 0.2%ni, 79.6%id, 11.8%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 2074580k total, 1863044k used, 211536k free, 174828k buffers Swap: 2040212k total, 84k used, 2040128k free, 987604k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:45.87 mysqld 21772 igniteth 17 0 23200 7152 3932 R 4 0.3 0:00.02 php 1586 root 10 -5 0 0 0 S 2 0.0 11:45.19 kjournald 21759 root 15 0 2416 1024 732 R 2 0.0 0:00.01 top 1 root 15 0 2156 648 560 S 0 0.0 0:26.31 init 2 root RT 0 0 0 0 S 0 0.0 0:00.35 migration/0 3 root 34 19 0 0 0 S 0 0.0 0:00.32 ksoftirqd/0 4 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 5 root RT 0 0 0 0 S 0 0.0 0:02.00 migration/1 6 root 34 19 0 0 0 S 0 0.0 0:00.11 ksoftirqd/1 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 8 root RT 0 0 0 0 S 0 0.0 0:01.29 migration/2 9 root 34 19 0 0 0 S 0 0.0 0:00.26 ksoftirqd/2 10 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/2 11 root RT 0 0 0 0 S 0 0.0 0:00.90 migration/3 12 root 34 19 0 0 0 R 0 0.0 0:00.20 ksoftirqd/3 13 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/3 top output (ordered by CPU time) top - 21:46:12 up 5 days, 10:41, 3 users, load average: 2.88, 3.82, 4.55 Tasks: 217 total, 1 running, 216 sleeping, 0 stopped, 0 zombie Cpu(s): 3.7%us, 2.0%sy, 2.0%ni, 67.2%id, 25.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2074580k total, 1959516k used, 115064k free, 183116k buffers Swap: 2040212k total, 84k used, 2040128k free, 1090308k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 32367 root 16 0 215m 212m 1548 S 0 10.5 62:03.63 62:03 tailwatchd 1586 root 10 -5 0 0 0 S 0 0.0 11:45.27 11:45 kjournald 1576 root 10 -5 0 0 0 S 0 0.0 2:37.86 2:37 kjournald 27722 root 16 0 2556 1184 800 S 0 0.1 1:48.94 1:48 top 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:48.63 1:48 mysqld 2932 root 34 19 0 0 0 S 0 0.0 1:41.05 1:41 kipmi0 226 root 10 -5 0 0 0 S 0 0.0 1:34.33 1:34 kswapd0 2671 named 25 0 74688 7400 2116 S 0 0.4 1:23.58 1:23 named 3229 root 15 0 10300 3348 2724 S 0 0.2 0:40.85 0:40 sshd 1580 root 10 -5 0 0 0 S 0 0.0 0:30.62 0:30 kjournald 1 root 17 0 2156 648 560 S 0 0.0 0:26.32 0:26 init 2616 root 15 0 1816 576 480 S 0 0.0 0:23.50 0:23 syslogd 1584 root 10 -5 0 0 0 S 0 0.0 0:18.67 0:18 kjournald 4342 root 34 19 27692 11m 2116 S 0 0.5 0:18.23 0:18 yum-updatesd 8044 bollingp 15 0 3456 2036 740 S 1 0.1 0:15.56 0:15 imapd 26 root 10 -5 0 0 0 S 0 0.0 0:14.18 0:14 kblockd/1 7989 gmailsit 16 0 3196 1748 736 S 0 0.1 0:10.43 0:10 imapd iostat -xtk 1 10 output [root@server1 tmp]# iostat -xtk 1 10 Linux 2.6.18-53.el5 12/18/2012 Time: 09:51:06 PM avg-cpu: %user %nice %system %iowait %steal %idle 5.83 0.19 2.53 11.85 0.00 79.60 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 1.37 118.83 18.70 54.27 131.47 692.72 22.59 4.90 67.19 3.10 22.59 sdb 0.35 39.33 20.33 61.43 158.79 403.22 13.75 5.23 63.93 3.77 30.80 Time: 09:51:07 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.50 0.00 0.50 24.00 0.00 74.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 25.00 2.00 2.00 128.00 108.00 118.00 0.03 7.25 4.00 1.60 sdb 0.00 16.00 41.00 145.00 200.00 668.00 9.33 107.92 272.72 5.38 100.10 Time: 09:51:08 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.00 0.00 1.50 29.50 0.00 67.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 95.00 3.00 33.00 12.00 480.00 27.33 0.07 1.72 1.31 4.70 sdb 0.00 14.00 1.00 228.00 4.00 960.00 8.42 143.49 568.01 4.37 100.10 Time: 09:51:09 PM avg-cpu: %user %nice %system %iowait %steal %idle 13.28 0.00 2.76 21.30 0.00 62.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 21.00 1.00 19.00 16.00 192.00 20.80 0.06 3.55 1.30 2.60 sdb 0.00 36.00 28.00 181.00 124.00 884.00 9.65 121.16 617.31 4.79 100.10 Time: 09:51:10 PM avg-cpu: %user %nice %system %iowait %steal %idle 4.74 0.00 1.50 25.19 0.00 68.58 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 20.00 3.00 15.00 12.00 136.00 16.44 0.17 7.11 3.11 5.60 sdb 0.00 0.00 103.00 60.00 544.00 248.00 9.72 52.35 545.23 6.14 100.10 Time: 09:51:11 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.24 0.00 1.24 25.31 0.00 72.21 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 75.00 4.00 28.00 16.00 416.00 27.00 0.08 3.72 2.03 6.50 sdb 2.00 9.00 124.00 17.00 616.00 104.00 10.21 3.73 213.73 7.10 100.10 Time: 09:51:12 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.00 0.00 0.75 24.31 0.00 73.93 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 24.00 1.00 9.00 4.00 132.00 27.20 0.01 1.20 1.10 1.10 sdb 4.00 40.00 103.00 48.00 528.00 212.00 9.80 105.21 104.32 6.64 100.20 Time: 09:51:13 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.50 0.00 1.75 23.25 0.00 72.50 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 125.74 3.96 46.53 15.84 689.11 27.92 0.20 4.06 2.41 12.18 sdb 2.97 0.00 91.09 84.16 419.80 471.29 10.17 85.85 590.78 5.66 99.11 Time: 09:51:14 PM avg-cpu: %user %nice %system %iowait %steal %idle 0.75 0.00 0.50 24.94 0.00 73.82 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 88.00 1.00 7.00 4.00 380.00 96.00 0.04 4.38 3.00 2.40 sdb 3.00 7.00 111.00 44.00 540.00 208.00 9.65 18.58 581.79 6.46 100.10 Time: 09:51:15 PM avg-cpu: %user %nice %system %iowait %steal %idle 11.03 0.00 3.26 26.57 0.00 59.15 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 145.00 7.00 53.00 28.00 792.00 27.33 0.15 2.50 1.55 9.30 sdb 1.00 0.00 155.00 0.00 800.00 0.00 10.32 2.85 18.63 6.46 100.10 [root@server1 tmp]# MySQL Show Full Processlist mysql> show full processlist; +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | 1 | DB_USER_ONE | localhost | DB_ONE | Query | 3 | waiting for handler insert | INSERT DELAYED INTO defers (mailtime,msgid,email,transport_method,message,host,ip,router,deliveryuser,deliverydomain) VALUES(FROM_UNIXTIME('1355879748'),'1TivwL-0003y8-8l','[email protected]','remote_smtp','SMTP error from remote mail server after initial connection: host mx1.mail.tw.yahoo.com [203.188.197.119]: 421 4.7.0 [TS01] Messages from 75.125.90.146 temporarily deferred due to user complaints - 4.16.55.1; see http://postmaster.yahoo.com/421-ts01.html','mx1.mail.tw.yahoo.com','203.188.197.119','lookuphost','','') | | 2 | DELAYED | localhost | DB_ONE | Delayed insert | 52 | insert | | | 3 | DELAYED | localhost | DB_ONE | Delayed insert | 68 | insert | | | 911 | DELAYED | localhost | DB_ONE | Delayed insert | 99 | Waiting for INSERT | | | 993 | DB_USER_TWO | localhost | DB_TWO | Sleep | 832 | | NULL | | 994 | DB_USER_ONE | localhost | DB_ONE | Query | 185 | Locked | delete from failures where FROM_UNIXTIME(UNIX_TIMESTAMP(NOW())-1296000) > mailtime | | 1102 | DB_USER_THREE | localhost | DB_THREE | Query | 29 | NULL | commit | | 1249 | DB_USER_FOUR | localhost | DB_FOUR | Query | 13 | NULL | commit | | 1263 | root | localhost | DB_FIVE | Query | 0 | NULL | show full processlist | | 1264 | DB_USER_SIX | localhost | DB_SIX | Query | 3 | NULL | commit | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ 10 rows in set (0.00 sec)

    Read the article

  • What is causing the unusual high load average?

    - by James
    I noticed on Tuesday night of last week, the load average went up sharply and it seemed abnormal since the traffic is small. Usually, the numbers usually average around .40 or lower and my server stuff (mysql, php and apache) are optimized. I noticed that the IOWait is unusually high even though the processes is barely using any CPU. top - 01:44:39 up 1 day, 21:13, 1 user, load average: 1.41, 1.09, 0.86 Tasks: 60 total, 1 running, 59 sleeping, 0 stopped, 0 zombie Cpu0 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 0.0%us, 0.3%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu5 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 0.0%us, 0.0%sy, 0.0%ni, 91.5%id, 8.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 331944k used, 716632k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2468 1376 1140 S 0 0.1 0:00.92 init 1656 root 15 0 13652 5212 664 S 0 0.5 0:00.00 apache2 9323 root 18 0 13652 5212 664 S 0 0.5 0:00.00 apache2 10079 root 18 0 3972 1248 972 S 0 0.1 0:00.00 su 10080 root 15 0 4612 1956 1448 S 0 0.2 0:00.01 bash 11298 root 15 0 13652 5212 664 S 0 0.5 0:00.00 apache2 11778 chikorit 15 0 2344 1092 884 S 0 0.1 0:00.05 top 15384 root 18 0 17544 13m 1568 S 0 1.3 0:02.28 miniserv.pl 15585 root 15 0 8280 2736 2168 S 0 0.3 0:00.02 sshd 15608 chikorit 15 0 8280 1436 860 S 0 0.1 0:00.02 sshd Here is the VMStat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 1 0 0 768644 0 0 0 0 14 23 0 10 1 0 99 0 IOStat - Nothing unusal Total DISK READ: 67.13 K/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 19496 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19501 be/4 mysql 3.95 K/s 0.00 B/s 0.00 % 0.00 % mysqld 19568 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19569 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19570 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19571 be/4 chikorit 7.90 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19573 be/4 chikorit 7.90 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 1 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % init 11778 be/4 chikorit 0.00 B/s 0.00 B/s 0.00 % 0.00 % top 19470 be/4 mysql 0.00 B/s 0.00 B/s 0.00 % 0.00 % mysqld Load Average Chart - http://i.stack.imgur.com/kYsD0.png I want to be sure if this is not a MySQL problem before making sure. Also, this is a Ubuntu 10.04 LTS Server on OpenVZ. Edit: This will probably give a good picture on the IO Wait top - 22:12:22 up 17:41, 1 user, load average: 1.10, 1.09, 0.93 Tasks: 33 total, 1 running, 32 sleeping, 0 stopped, 0 zombie Cpu(s): 0.6%us, 0.2%sy, 0.0%ni, 89.0%id, 10.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 260708k used, 787868k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2468 1376 1140 S 0 0.1 0:00.88 init 5849 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 8063 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 9732 root 16 0 8280 2728 2168 S 0 0.3 0:00.02 sshd 9746 chikorit 18 0 8412 1444 864 S 0 0.1 0:01.10 sshd 9747 chikorit 18 0 4576 1960 1488 S 0 0.2 0:00.24 bash 13706 chikorit 15 0 2344 1088 884 R 0 0.1 0:00.03 top 15745 chikorit 15 0 12968 5108 1280 S 0 0.5 0:00.00 apache2 15751 chikorit 15 0 72184 25m 18m S 0 2.5 0:00.37 php5-fpm 15790 chikorit 18 0 12472 4640 1192 S 0 0.4 0:00.00 apache2 15797 chikorit 15 0 72888 23m 16m S 0 2.3 0:00.06 php5-fpm 16038 root 15 0 67772 2848 592 D 0 0.3 0:00.00 php5-fpm 16309 syslog 18 0 24084 1316 992 S 0 0.1 0:00.07 rsyslogd 16316 root 15 0 5472 908 500 S 0 0.1 0:00.00 sshd 16326 root 15 0 2304 908 712 S 0 0.1 0:00.02 cron 17464 root 15 0 10252 7560 856 D 0 0.7 0:01.88 psad 17466 root 18 0 1684 276 208 S 0 0.0 0:00.31 psadwatchd 17559 root 18 0 11444 2020 732 S 0 0.2 0:00.47 sendmail-mta 17688 root 15 0 10252 5388 1136 S 0 0.5 0:03.81 python 17752 teamspea 19 0 44648 7308 4676 S 0 0.7 1:09.70 ts3server_linux 18098 root 15 0 12336 6380 3032 S 0 0.6 0:00.47 apache2 18099 chikorit 18 0 10368 2536 464 S 0 0.2 0:00.00 apache2 18120 ntp 15 0 4336 1316 984 S 0 0.1 0:00.87 ntpd 18379 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 18387 mysql 15 0 62796 36m 5864 S 0 3.6 1:43.26 mysqld 19584 root 15 0 12336 4028 668 S 0 0.4 0:00.02 apache2 22498 root 16 0 12336 4028 668 S 0 0.4 0:00.00 apache2 24260 root 15 0 67772 3612 1356 S 0 0.3 0:00.22 php5-fpm 27712 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 27730 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 30343 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 30366 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 This is the free ram as of today. total used free shared buffers cached Mem: 1024 302 721 0 0 0 -/+ buffers/cache: 302 721 Swap: 0 0 0 Update: Looking into the logs, particularly the PHP5-FPM, which is causing the CPU spike. I found that its segment faulting for some apparent reason. [03-Jun-2012 06:11:20] NOTICE: [pool www] child 14132 started [03-Jun-2012 06:11:25] WARNING: [pool www] child 13664 exited on signal 11 (SIGSEGV) after 53.686322 seconds from start [03-Jun-2012 06:11:25] NOTICE: [pool www] child 14328 started [03-Jun-2012 06:11:25] WARNING: [pool www] child 14132 exited on signal 11 (SIGSEGV) after 4.708681 seconds from start [03-Jun-2012 06:11:25] NOTICE: [pool www] child 14329 started [03-Jun-2012 06:11:58] WARNING: [pool www] child 14328 exited on signal 11 (SIGSEGV) after 32.981228 seconds from start [03-Jun-2012 06:11:58] NOTICE: [pool www] child 15745 started [03-Jun-2012 06:12:25] WARNING: [pool www] child 15745 exited on signal 11 (SIGSEGV) after 27.442864 seconds from start [03-Jun-2012 06:12:25] NOTICE: [pool www] child 17446 started [03-Jun-2012 06:12:25] WARNING: [pool www] child 14329 exited on signal 11 (SIGSEGV) after 60.411278 seconds from start [03-Jun-2012 06:12:25] NOTICE: [pool www] child 17447 started [03-Jun-2012 06:13:02] WARNING: [pool www] child 17446 exited on signal 11 (SIGSEGV) after 36.746793 seconds from start [03-Jun-2012 06:13:02] NOTICE: [pool www] child 18133 started [03-Jun-2012 06:13:48] WARNING: [pool www] child 17447 exited on signal 11 (SIGSEGV) after 82.710107 seconds from start I'm thinking that this might be causing the problem. If that is the cause, probably switching it off that to fastcgi/fcgid might resolve it... but still, I want to see if something else might be causing it to do this.

    Read the article

  • Failed to convert a wmv file to mp4 with ffmpeg

    - by Olaf Erlandsen
    i need a help with this command FFMPEG COMMAND: ffmpeg -y -i /input.wmv -vcodec libx264 -acodec libfaac -ac 2 -bufsize 20M -sameq -f mp4 /output.mp4 Output: ffmpeg version 1.0 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 9 2012 07:04:08 with gcc 4.4.6 (GCC) 20120305 (Red Hat 4.4.6-4) [wmv3 @ 0x16a4800] Extra data: 8 bits left, value: 0 Guessed Channel Layout for Input Stream #0.0 : stereo Input #0, asf, from '/input.wmv': Metadata: WMFSDKVersion : 11.0.5721.5275 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 Duration: 00:01:35.10, start: 0.000000, bitrate: 496 kb/s Stream #0:0(spa): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, s16, 64 kb/s Stream #0:1(spa): Video: wmv3 (Main) (WMV3 / 0x33564D57), yuv420p, 320x240, 425 kb/s, SAR 1:1 DAR 4:3, 29.97 tbr, 1k tbn, 1k tbc [libx264 @ 0x16c3000] VBV bufsize set but maxrate unspecified, ignored [libx264 @ 0x16c3000] using SAR=1/1 [libx264 @ 0x16c3000] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x16c3000] profile High, level 1.3 [libx264 @ 0x16c3000] 264 - core 128 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 [wmv3 @ 0x16a4800] Extra data: 8 bits left, value: 0 Output #0, mp4, to '/output.mp4': Metadata: WMFSDKVersion : 11.0.5721.5275 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 encoder : Lavf54.29.104 Stream #0:0(spa): Video: h264 ([33][0][0][0] / 0x0021), yuv420p, 320x240 [SAR 1:1 DAR 4:3], q=-1--1, 30k tbn, 29.97 tbc Stream #0:1(spa): Audio: aac ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0:1 -> #0:0 (wmv3 -> libx264) Stream #0:0 -> #0:1 (wmav2 -> libfaac) Press [q] to stop, [?] for help [libfaac @ 0x16b3600] Que input is backward in time [mp4 @ 0x16bb3a0] st:0 PTS: 6174 DTS: 6174 < 7169 invalid, clipping frame= 144 fps=0.0 q=29.0 size= 207kB time=00:00:03.38 bitrate= 500.3kbits/s frame= 259 fps=257 q=29.0 size= 447kB time=00:00:07.30 bitrate= 501.3kbits/s frame= 375 fps=248 q=29.0 size= 668kB time=00:00:11.01 bitrate= 496.5kbits/s frame= 487 fps=241 q=29.0 size= 836kB time=00:00:14.85 bitrate= 460.7kbits/s frame= 605 fps=240 q=29.0 size= 1080kB time=00:00:18.92 bitrate= 467.4kbits/s frame= 719 fps=238 q=29.0 size= 1306kB time=00:00:22.80 bitrate= 469.2kbits/s frame= 834 fps=237 q=29.0 size= 1546kB time=00:00:26.52 bitrate= 477.3kbits/s frame= 953 fps=237 q=29.0 size= 1763kB time=00:00:30.27 bitrate= 477.0kbits/s frame= 1071 fps=237 q=29.0 size= 1986kB time=00:00:34.36 bitrate= 473.4kbits/s frame= 1161 fps=231 q=29.0 size= 2160kB time=00:00:37.21 bitrate= 475.4kbits/s frame= 1221 fps=220 q=29.0 size= 2282kB time=00:00:39.53 bitrate= 472.9kbits/s frame= 1280 fps=212 q=29.0 size= 2392kB time=00:00:41.16 bitrate= 476.1kbits/s frame= 1331 fps=203 q=29.0 size= 2502kB time=00:00:43.23 bitrate= 474.1kbits/s frame= 1379 fps=195 q=29.0 size= 2618kB time=00:00:44.72 bitrate= 479.6kbits/s frame= 1430 fps=189 q=29.0 size= 2733kB time=00:00:46.34 bitrate= 483.0kbits/s frame= 1487 fps=184 q=29.0 size= 2851kB time=00:00:48.40 bitrate= 482.6kbits/s frame= 1546 fps=180 q=26.0 size= 2973kB time=00:00:50.43 bitrate= 482.9kbits/s frame= 1610 fps=177 q=29.0 size= 3112kB time=00:00:52.40 bitrate= 486.5kbits/s frame= 1672 fps=174 q=29.0 size= 3231kB time=00:00:54.35 bitrate= 487.0kbits/s frame= 1733 fps=171 q=29.0 size= 3348kB time=00:00:56.51 bitrate= 485.3kbits/s frame= 1792 fps=169 q=29.0 size= 3459kB time=00:00:58.28 bitrate= 486.2kbits/s frame= 1851 fps=166 q=29.0 size= 3588kB time=00:01:00.32 bitrate= 487.2kbits/s frame= 1910 fps=164 q=29.0 size= 3716kB time=00:01:02.36 bitrate= 488.1kbits/s frame= 1972 fps=162 q=29.0 size= 3833kB time=00:01:04.45 bitrate= 487.1kbits/s frame= 2032 fps=161 q=29.0 size= 3946kB time=00:01:06.40 bitrate= 486.8kbits/s frame= 2091 fps=159 q=29.0 size= 4080kB time=00:01:08.35 bitrate= 488.9kbits/s frame= 2150 fps=158 q=29.0 size= 4201kB time=00:01:10.54 bitrate= 487.9kbits/s frame= 2206 fps=156 q=29.0 size= 4315kB time=00:01:12.39 bitrate= 488.3kbits/s frame= 2263 fps=154 q=29.0 size= 4438kB time=00:01:14.21 bitrate= 489.9kbits/s frame= 2327 fps=154 q=29.0 size= 4567kB time=00:01:16.16 bitrate= 491.2kbits/s frame= 2388 fps=152 q=29.0 size= 4666kB time=00:01:18.48 bitrate= 487.0kbits/s frame= 2450 fps=152 q=29.0 size= 4776kB time=00:01:20.24 bitrate= 487.6kbits/s frame= 2511 fps=151 q=29.0 size= 4890kB time=00:01:22.15 bitrate= 487.6kbits/s frame= 2575 fps=150 q=29.0 size= 5015kB time=00:01:24.42 bitrate= 486.6kbits/s frame= 2635 fps=149 q=29.0 size= 5130kB time=00:01:26.62 bitrate= 485.2kbits/s frame= 2695 fps=148 q=29.0 size= 5258kB time=00:01:28.65 bitrate= 485.9kbits/s frame= 2758 fps=147 q=29.0 size= 5382kB time=00:01:30.64 bitrate= 486.4kbits/s frame= 2816 fps=147 q=29.0 size= 5521kB time=00:01:32.69 bitrate= 487.9kbits/s get_buffer() failed Error while decoding stream #0:0: Invalid argument frame= 2848 fps=143 q=-1.0 Lsize= 5787kB time=00:01:35.10 bitrate= 498.4kbits/s video:5099kB audio:581kB subtitle:0 global headers:0kB muxing overhead 1.884230% [libx264 @ 0x16c3000] frame I:12 Avg QP:22.64 size: 12092 [libx264 @ 0x16c3000] frame P:1508 Avg QP:25.39 size: 2933 [libx264 @ 0x16c3000] frame B:1328 Avg QP:30.62 size: 491 [libx264 @ 0x16c3000] consecutive B-frames: 10.0% 80.8% 8.1% 1.1% [libx264 @ 0x16c3000] mb I I16..4: 1.8% 72.1% 26.0% [libx264 @ 0x16c3000] mb P I16..4: 0.4% 2.4% 0.3% P16..4: 48.3% 19.6% 19.3% 0.0% 0.0% skip: 9.5% [libx264 @ 0x16c3000] mb B I16..4: 0.1% 0.2% 0.0% B16..8: 52.6% 6.6% 2.3% direct: 1.4% skip:36.8% L0:48.8% L1:42.5% BI: 8.7% [libx264 @ 0x16c3000] 8x8 transform intra:75.3% inter:55.4% [libx264 @ 0x16c3000] coded y,uvDC,uvAC intra: 77.9% 81.7% 33.1% inter: 24.2% 11.6% 1.1% [libx264 @ 0x16c3000] i16 v,h,dc,p: 25% 16% 44% 14% [libx264 @ 0x16c3000] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 15% 29% 6% 5% 6% 6% 7% 7% [libx264 @ 0x16c3000] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 20% 15% 17% 7% 9% 8% 9% 7% 7% [libx264 @ 0x16c3000] i8c dc,h,v,p: 50% 19% 24% 7% [libx264 @ 0x16c3000] Weighted P-Frames: Y:3.8% UV:1.1% [libx264 @ 0x16c3000] ref P L0: 75.6% 19.1% 4.2% 1.0% 0.1% [libx264 @ 0x16c3000] ref B L0: 98.1% 1.9% 0.0% [libx264 @ 0x16c3000] ref B L1: 98.9% 1.1% [libx264 @ 0x16c3000] kb/s:439.47 FFMPEG Configuration: --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvpx --enable-libfaac --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-gpl --enable-postproc --enable-nonfree libavutil 51. 73.101 / 51. 73.101 libavcodec 54. 59.100 / 54. 59.100 libavformat 54. 29.104 / 54. 29.104 libavdevice 54. 2.101 / 54. 2.101 libavfilter 3. 17.100 / 3. 17.100 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 PROBLEM #1: [libfaac @ 0x16b3600] Que input is backward in time [mp4 @ 0x16bb3a0] st:0 PTS: 6174 DTS: 6174 < 7169 invalid, clipping PROBLEM #2: get_buffer() failed Error while decoding stream #0:0: Invalid argument

    Read the article

  • Use DivX settings to encode to mp4 with ffmpeg

    - by sjngm
    I'm used to use VirtualDub to encode a video to AVI container with DivX-codec (and MP3 for audio). Now I'm planning to use ffmpeg to encode videos to MP4 container with h264-codec. What I've figured out is that I need to use libx264 and one of those presets to make anything work. However, I'm amazed about the video bitrate ffmpeg uses for encoding. What I currently have is this little batch file: @ECHO OFF SETLOCAL SET IN=source.avs SET FFMPEG_PATH=C:\Program Files (x86)\ffmpeg SET PRESET=-fpre "%FFMPEG_PATH%\presets\libx264-lossless_slow.ffpreset" SET AUDIO=-acodec libmp3lame -ab 128000 SET VIDEO=-vcodec libx264 -vb 1978000 "%FFMPEG_PATH%\ffmpeg.exe" -i %IN% %AUDIO% %VIDEO% %PRESET% test.mp4 ENDLOCAL With this I tell ffmpeg to use 1978k as the bitrate, but ffmpeg uses 15000k+! I tried other presets, but they don't use my specified bitrate. Here are the presets I have: libx264-baseline.ffpreset libx264-ipod320.ffpreset libx264-ipod640.ffpreset libx264-lossless_fast.ffpreset libx264-lossless_max.ffpreset libx264-lossless_medium.ffpreset libx264-lossless_slow.ffpreset libx264-lossless_slower.ffpreset libx264-lossless_ultrafast.ffpreset ffmpeg version: FFmpeg git-N-29181-ga304071 libavutil 50. 40. 1 / 50. 40. 1 libavcodec 52.120. 0 / 52.120. 0 libavformat 52.108. 0 / 52.108. 0 libavdevice 52. 4. 0 / 52. 4. 0 libavfilter 1. 79. 0 / 1. 79. 0 libswscale 0. 13. 0 / 0. 13. 0 Note that I don't use the latest version as it has problems with spaces in filenames. Here's what seems to be the full parameter list DivX 6.9.2 uses: -bvnn 1978000 -vbv 218691200,100663296,100663296 -dir "C:\Users\sjngm\AppData\Roaming\DivX\DivX Codec" -w -b 1 -use_presets=1 -preset=10 -windowed_fullsearch=2 -thread_delay=1 What command line parameters would that be for ffmpeg? EDIT: Going with slhck's suggestion I tried a new 32-bit version. I have no idea if that is 0.9 or newer, I can't find that info. ffmpeg version N-36890-g67f5650 libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 I reworked my batch file to look like this (interestingly enough I can't find parameter -vprofile in the documentation): @ECHO OFF SETLOCAL SET IN=VTS_01_1.avs SET FFMPEG_PATH=C:\Program Files (x86)\ffmpeg SET PRESET=-vprofile high -preset veryslow SET AUDIO=-acodec libmp3lame -ab 128000 SET VIDEO=-vcodec libx264 -vb 1978000 "%FFMPEG_PATH%\ffmpeg.exe" -i %IN% %AUDIO% %PRESET% %VIDEO% test.mp4 ENDLOCAL I see that it now uses the bitrate properly (thanks to LongNeckbeard for pointing out that the lossless-stuff ignores the bitrate!). Just in case you wonder how I came up with the 1978000, I'm using this formula which I found valid for DivX-files (I'm guessing the bitrate won't change that much for h264): width * height * 25 * 0.22 / 1000 I'm not sure if the 0.22 correlates with the CRF somehow. Overall I forgot to say the I will use a two-pass scenario, which is why I don't use the CRF here. I will try to read more about this. Currently I'm just trying to get something running that shows me that I'm doing something right (ffmpeg isn't the easiest tool to understand ;)). C:\Program Files (x86)\ffmpeg\ffmpeg.exe" -i VTS_01_1.avs -acodec libmp3lame -ab 128000 -vcodec libx264 -vb 1978000 -vprofile high -preset veryslow test.mp4 The output is now: ffmpeg version N-36890-g67f5650 Copyright (c) 2000-2012 the FFmpeg developers built on Jan 16 2012 21:57:13 with gcc 4.6.2 configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 Input #0, avs, from 'VTS_01_1.avs': Duration: 00:58:46.12, start: 0.000000, bitrate: 0 kb/s Stream #0:0: Video: rawvideo (YV12 / 0x32315659), yuv420p, 576x448, 77414 kb/s, 25 tbr, 25 tbn, 25 tbc Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 48000 Hz, 2 channels, s16, 1536 kb/s File 'test.mp4' already exists. Overwrite ? [y/N] y w:576 h:448 pixfmt:yuv420p tb:1/1000000 sar:0/1 sws_param: [libx264 @ 05A2C400] using cpu capabilities: MMX2 SSE2Fast FastShuffle SSEMisalign LZCNT [libx264 @ 05A2C400] profile High, level 3.1 [libx264 @ 05A2C400] 264 - core 120 r2120 0c7dab9 - H.264/MPEG-4 AVC codec - Copyleft 2003-2011 - http://www.videolan.org/x264.html - options: cabac=1 ref=16 deblock=1:0:0 analyse=0x3:0x133 me=umh subme=10 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=24 chroma_me=1 trellis=2 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=8 b_pyramid=2 b_adapt=2 b_bias=0 direct=3 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=60 rc=abr mbtree=1 bitrate=1978 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'test.mp4': Metadata: encoder : Lavf53.30.100 Stream #0:0: Video: h264 (![0][0][0] / 0x0021), yuv420p, 576x448, q=-1--1, 1978 kb/s, 25 tbn, 25 tbc Stream #0:1: Audio: mp3 (i[0][0][0] / 0x0069), 48000 Hz, 2 channels, s16, 128 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #0:1 -> #0:1 (pcm_s16le -> libmp3lame) Press [q] to stop, [?] for help frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 3 fps= 1 q=22.0 size= 39kB time=00:00:00.04 bitrate=8063.8kbits/ frame= 8 fps= 2 q=22.0 size= 82kB time=00:00:00.24 bitrate=2801.3kbits/ frame= 13 fps= 3 q=23.0 size= 120kB time=00:00:00.44 bitrate=2229.5kbits/ frame= 16 fps= 4 q=23.0 size= 147kB time=00:00:00.56 bitrate=2156.7kbits/ frame= 20 fps= 4 q=22.0 size= 175kB time=00:00:00.72 bitrate=1987.4kbits/ : video:4387kB audio:273kB global headers:0kB muxing overhead 0.260038% [libx264 @ 05A2C400] frame I:2 Avg QP:19.53 size: 29850 [libx264 @ 05A2C400] frame P:76 Avg QP:22.24 size: 19541 [libx264 @ 05A2C400] frame B:359 Avg QP:25.93 size: 8210 [libx264 @ 05A2C400] consecutive B-frames: 0.5% 0.5% 0.0% 8.2% 17.2% 52.2% 16.0% 5.5% 0.0% [libx264 @ 05A2C400] mb I I16..4: 5.4% 75.3% 19.3% [libx264 @ 05A2C400] mb P I16..4: 1.3% 16.5% 2.2% P16..4: 36.3% 28.6% 12.7% 1.8% 0.2% skip: 0.4% [libx264 @ 05A2C400] mb B I16..4: 0.4% 3.8% 0.3% B16..8: 40.0% 18.4% 4.7% direct:18.5% skip:13.9% L0:45.4% L1:38.1% BI:16.5% [libx264 @ 05A2C400] final ratefactor: 20.35 [libx264 @ 05A2C400] 8x8 transform intra:83.1% inter:68.5% [libx264 @ 05A2C400] direct mvs spatial:99.2% temporal:0.8% [libx264 @ 05A2C400] coded y,uvDC,uvAC intra: 64.9% 83.4% 49.2% inter: 49.0% 50.4% 4.4% [libx264 @ 05A2C400] i16 v,h,dc,p: 25% 22% 27% 26% [libx264 @ 05A2C400] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 7% 23% 9% 10% 10% 10%10% 13% [libx264 @ 05A2C400] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 11% 13% 9% 12% 11% 10% 9% 12% [libx264 @ 05A2C400] i8c dc,h,v,p: 42% 28% 16% 14% [libx264 @ 05A2C400] Weighted P-Frames: Y:18.4% UV:7.9% [libx264 @ 05A2C400] ref P L0: 29.1% 11.3% 15.7% 7.3% 6.9% 4.9% 5.1% 3.4%3.9% 2.7% 2.8% 1.8% 1.7% 1.2% 1.4% 0.9% [libx264 @ 05A2C400] ref B L0: 68.8% 11.4% 5.5% 2.9% 2.3% 1.9% 1.5% 1.1%1.1% 1.0% 0.9% 0.7% 0.5% 0.3% 0.1% [libx264 @ 05A2C400] ref B L1: 91.9% 8.1% [libx264 @ 05A2C400] kb/s:2055.88 As far as I'm concerned it doesn't look that bad to me.

    Read the article

  • Linux server is only using 60% of memory, then swapping

    - by Kamil Kisiel
    I've got a Linux server that's running our bacula backup system. The machine is grinding like mad because it's going heavy in to swap. The problem is, it's only using 60% of its physical memory! Here's the output from free -m: free -m total used free shared buffers cached Mem: 3949 2356 1593 0 0 1 -/+ buffers/cache: 2354 1595 Swap: 7629 1804 5824 and some sample output from vmstat 1: procs -----------memory---------- ---swap-- -----io---- -system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 2 1843536 1634512 0 4188 54 13 2524 666 2 1 1 1 89 9 0 1 11 1845916 1640724 0 388 2700 4816 221880 4879 14409 170721 4 3 63 30 0 0 9 1846096 1643952 0 0 4956 756 174832 804 12357 159306 3 4 63 30 0 0 11 1846104 1643532 0 0 4916 540 174320 580 10609 139960 3 4 64 29 0 0 4 1846084 1640272 0 2336 4080 524 140408 548 9331 118287 3 4 63 30 0 0 8 1846104 1642096 0 1488 2940 432 102516 457 7023 82230 2 4 65 29 0 0 5 1846104 1642268 0 1276 3704 452 126520 452 9494 119612 3 5 65 27 0 3 12 1846104 1641528 0 328 6092 608 187776 636 8269 113059 4 3 64 29 0 2 2 1846084 1640960 0 724 5948 0 111480 0 7751 116370 4 4 63 29 0 0 4 1846100 1641484 0 404 4144 1476 125760 1500 10668 105358 2 3 71 25 0 0 13 1846104 1641932 0 0 5872 828 153808 840 10518 128447 3 4 70 22 0 0 8 1846096 1639172 0 3164 3556 556 74884 580 5082 65362 2 2 73 23 0 1 4 1846080 1638676 0 396 4512 28 50928 44 2672 38277 2 2 80 16 0 0 3 1846080 1628808 0 7132 2636 0 28004 8 1358 14090 0 1 78 20 0 0 2 1844728 1618552 0 11140 7680 0 12740 8 763 2245 0 0 82 18 0 0 2 1837764 1532056 0 101504 2952 0 95644 24 802 3817 0 1 87 12 0 0 11 1842092 1633324 0 4416 1748 10900 143144 11024 6279 134442 3 3 70 24 0 2 6 1846104 1642756 0 0 4768 468 78752 468 4672 60141 2 2 76 20 0 1 12 1846104 1640792 0 236 4752 440 140712 464 7614 99593 3 5 58 34 0 0 3 1846084 1630368 0 6316 5104 0 20336 0 1703 22424 1 1 72 26 0 2 17 1846104 1638332 0 3168 4080 1720 211960 1744 11977 155886 3 4 65 28 0 1 10 1846104 1640800 0 132 4488 556 126016 584 8016 106368 3 4 63 29 0 0 14 1846104 1639740 0 2248 3436 428 114188 452 7030 92418 3 3 59 35 0 1 6 1846096 1639504 0 1932 5500 436 141412 460 8261 112210 4 4 63 29 0 0 10 1846104 1640164 0 3052 4028 448 147684 472 7366 109554 4 4 61 30 0 0 10 1846100 1641040 0 2332 4952 632 147452 664 8767 118384 3 4 63 30 0 4 8 1846084 1641092 0 664 4948 276 152264 292 6448 98813 5 5 62 28 0 Furthermore, the output of top sorted by CPU time seems to support the theory that swap is what's bogging down the system: top - 09:05:32 up 37 days, 23:24, 1 user, load average: 9.75, 8.24, 7.12 Tasks: 173 total, 1 running, 172 sleeping, 0 stopped, 0 zombie Cpu(s): 1.6%us, 1.4%sy, 0.0%ni, 76.1%id, 20.6%wa, 0.1%hi, 0.2%si, 0.0%st Mem: 4044632k total, 2405628k used, 1639004k free, 0k buffers Swap: 7812492k total, 1851852k used, 5960640k free, 436k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 4174 root 17 0 63156 176 56 S 8 0.0 2138:52 35,38 bacula-fd 4185 root 17 0 63352 284 104 S 6 0.0 1709:25 28,29 bacula-sd 240 root 15 0 0 0 0 D 3 0.0 831:55.19 831:55 kswapd0 2852 root 10 -5 0 0 0 S 1 0.0 126:35.59 126:35 xfsbufd 2849 root 10 -5 0 0 0 S 0 0.0 119:50.94 119:50 xfsbufd 1364 root 10 -5 0 0 0 S 0 0.0 117:05.39 117:05 xfsbufd 21 root 10 -5 0 0 0 S 1 0.0 48:03.44 48:03 events/3 6940 postgres 16 0 43596 8 8 S 0 0.0 46:50.35 46:50 postmaster 1342 root 10 -5 0 0 0 S 0 0.0 23:14.34 23:14 xfsdatad/4 5415 root 17 0 1770m 108 48 S 0 0.0 15:03.74 15:03 bacula-dir 23 root 10 -5 0 0 0 S 0 0.0 13:09.71 13:09 events/5 5604 root 17 0 1216m 500 200 S 0 0.0 12:38.20 12:38 java 5552 root 16 0 1194m 580 248 S 0 0.0 11:58.00 11:58 java Here's the same sorted by virtual memory image size: top - 09:08:32 up 37 days, 23:27, 1 user, load average: 8.43, 8.26, 7.32 Tasks: 173 total, 1 running, 172 sleeping, 0 stopped, 0 zombie Cpu(s): 3.6%us, 3.4%sy, 0.0%ni, 62.2%id, 30.2%wa, 0.2%hi, 0.3%si, 0.0%st Mem: 4044632k total, 2404212k used, 1640420k free, 0k buffers Swap: 7812492k total, 1852548k used, 5959944k free, 100k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 5415 root 17 0 1770m 56 44 S 0 0.0 15:03.78 15:03 bacula-dir 5604 root 17 0 1216m 492 200 S 0 0.0 12:38.30 12:38 java 5552 root 16 0 1194m 476 200 S 0 0.0 11:58.20 11:58 java 4598 root 16 0 117m 44 44 S 0 0.0 0:13.37 0:13 eventmond 9614 gdm 16 0 93188 0 0 S 0 0.0 0:00.30 0:00 gdmgreeter 5527 root 17 0 78716 0 0 S 0 0.0 0:00.30 0:00 gdm 4185 root 17 0 63352 284 104 S 20 0.0 1709:52 28,29 bacula-sd 4174 root 17 0 63156 208 88 S 24 0.0 2139:25 35,39 bacula-fd 10849 postgres 18 0 54740 216 108 D 0 0.0 0:31.40 0:31 postmaster 6661 postgres 17 0 49432 0 0 S 0 0.0 0:03.50 0:03 postmaster 5507 root 15 0 47980 0 0 S 0 0.0 0:00.00 0:00 gdm 6940 postgres 16 0 43596 16 16 S 0 0.0 46:51.39 46:51 postmaster 5304 postgres 16 0 40580 132 88 S 0 0.0 6:21.79 6:21 postmaster 5301 postgres 17 0 40448 24 24 S 0 0.0 0:32.17 0:32 postmaster 11280 root 16 0 40288 28 28 S 0 0.0 0:00.11 0:00 sshd 5534 root 17 0 37580 0 0 S 0 0.0 0:56.18 0:56 X 30870 root 30 15 31668 28 28 S 0 0.0 1:13.38 1:13 snmpd 5305 postgres 17 0 30628 16 16 S 0 0.0 0:11.60 0:11 postmaster 27403 postfix 17 0 30248 0 0 S 0 0.0 0:02.76 0:02 qmgr 10815 postfix 15 0 30208 16 16 S 0 0.0 0:00.02 0:00 pickup 5306 postgres 16 0 29760 20 20 S 0 0.0 0:52.89 0:52 postmaster 5302 postgres 17 0 29628 64 32 S 0 0.0 1:00.64 1:00 postmaster I've tried tuning the swappiness kernel parameter to both high and low values, but nothing appears to change the behavior here. I'm at a loss to figure out what's going on. How can I find out what's causing this? Update: The system is a fully 64-bit system, so there should be no question of memory limitations due to 32-bit issues. Update2: As I mentioned in the original question, I've already tried tuning swappiness to all sorts of values, including 0. The result is always the same, with approximately 1.6 GB of memory remaining unused. Update3: Added top output to the above info.

    Read the article

  • How can my CGI program access non-browseable files?

    - by Zerobu
    I was wondering if it was possible to read a text file that was located in a directory called "/home/user/files" I wanted to read it from my cgi-bin which is located in /home/user/cgi-bi/ Below is my code, #!/usr/bin/perl use strict; use CGI; #Virtual Directory #Steffan Harris eval { use constant PASSWORD => 'perl'; use constant UPLOAD_DIR => '/home/sharris2/files'; sub mapToFile { print chdir UPLOAD_DIR; } #This function will list all files in a directory. sub listDirectoryFiles { chdir UPLOAD_DIR; my @files = <*>; mapToFile; print<<LIST; <h2>Current Files</h2> <ul> LIST if(!$files[0]) { print" </ul>\n<em>No files in directory</em>"; } foreach(@files) { print" <li>$_</li>"; } print " </ul>\n"; } #This function generates a 404 Not Found error sub generate404 { print<<RESPONSE; Status: 404 Not Found Content-Type: text/html <html> <head><title>404 Not Found</title></head> <body> <p> <h1>404 - Not Found</h1> </p> The requested URL <b>$ENV{"HTTP_HOST"}$ENV{"REQUEST_URI"}</b> was not found on the server. </body> </html> RESPONSE exit; } #This function checks the path info to see if it matches a file in the UPLOAD_DIR directory, If it does not, then it returns a 404 error sub checkExsistence { if($ENV{"PATH_INFO"}) { chdir UPLOAD_DIR; my @files = <*>; if(!$files[0] and $ENV{"PATH_INFO"} eq "/") { return; } foreach(@files) { if($ENV{"PATH_INFO"} eq "/".$_ || $ENV{"PATH_INFO"} eq "/") { print "yes"; return; } } generate404; } } sub checkPassword { my ($password, $cgi); $cgi = new CGI; $password = $cgi->param('passwd'); unless($password eq PASSWORD) { print<<RESPONSE; Status: 200 OK Content-Type: text/html <html> <head> <title>Incorrect Password</title> </head> <body> <h1>Invalid password entered.</h1> <h3><a href="/~sharris2/cgi-bin/files/">Go Back</a></h3> </body> RESPONSE exit; } } sub upLoadFile { checkPassword; my ($uploadfile, $cgi); $cgi = new CGI; $uploadfile = $cgi->upload('uploadfile'); chdir UPLOAD_DIR; $uploadfile or die "Did not receive a file to upload"; open my $FILE, '>', UPLOAD_DIR."/$uploadfile" or die "$!"; while(<$uploadfile>) { print $FILE $_; } } #Start of main part of program my $cgi = new CGI; if(!$ENV{"PATH_INFO"}) { print $cgi->redirect('/~sharris2/cgi-bin/files/'); } checkExsistence; if($ENV{"REQUEST_METHOD"} eq "POST") { upLoadFile; } print <<"HEADERS"; Status: 200 OK Content-Type: text/html HEADERS print <<"HTML"; <html> <head> <title>Virtual Directory</title> </head> <body> HTML listDirectoryFiles; print<<HTML; <h2>Upload a new file</h2> <form method = "POST" enctype = "multipart/form-data" action = "/~sharris2/cgi-bin/files/" /> File:<input type = "file" name="uploadfile"/> <p>Password: <input type = "password" name ="passwd"/></p> <p><input type = "submit" value= "Submit File" /></p> </form> </body> </html> HTML };

    Read the article

  • High CPU usage with Team Speak 3.0.0-rc2

    - by AlexTheBird
    The CPU usage is always around 40 percent. I use push-to-talk and I had uninstalled pulseaudio. Now I use Alsa. I don't even have to connect to a Server. By simply starting TS the cpu usage goes up 40 percent and stays there. The CPU usage of 3.0.0-rc1 [Build: 14468] is constantly 14 percent. This is the output of top, mpstat and ps aux while I am running TS3 ... of course: alexandros@alexandros-laptop:~$ top top - 18:20:07 up 2:22, 3 users, load average: 1.02, 0.85, 0.77 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie Cpu(s): 5.3%us, 1.9%sy, 0.1%ni, 91.8%id, 0.7%wa, 0.1%hi, 0.1%si, 0.0%st Mem: 2061344k total, 964028k used, 1097316k free, 69116k buffers Swap: 3997688k total, 0k used, 3997688k free, 449032k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2714 alexandr 20 0 206m 31m 24m S 37 1.6 0:12.78 ts3client_linux 868 root 20 0 47564 27m 10m S 8 1.4 3:21.73 Xorg 1 root 20 0 2804 1660 1204 S 0 0.1 0:00.53 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.01 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.45 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.08 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:01.17 events/0 10 root 20 0 0 0 0 S 0 0.0 0:00.81 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 14 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.05 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.99 ata/0 26 root 20 0 0 0 0 S 0 0.0 0:00.92 ata/1 27 root 20 0 0 0 0 S 0 0.0 0:00.00 ata_aux 28 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 29 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd alexandros@alexandros-laptop:~$ mpstat Linux 2.6.32-32-generic (alexandros-laptop) 16.06.2011 _i686_ (2 CPU) 18:20:15 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle 18:20:15 all 5,36 0,09 1,91 0,68 0,07 0,06 0,00 0,00 91,83 alexandros@alexandros-laptop:~$ ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 2804 1660 ? Ss 15:58 0:00 /sbin/init root 2 0.0 0.0 0 0 ? S 15:58 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S 15:58 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S 15:58 0:00 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S 15:58 0:00 [watchdog/0] root 6 0.0 0.0 0 0 ? S 15:58 0:00 [migration/1] root 7 0.0 0.0 0 0 ? S 15:58 0:00 [ksoftirqd/1] root 8 0.0 0.0 0 0 ? S 15:58 0:00 [watchdog/1] root 9 0.0 0.0 0 0 ? S 15:58 0:01 [events/0] root 10 0.0 0.0 0 0 ? S 15:58 0:00 [events/1] root 11 0.0 0.0 0 0 ? S 15:58 0:00 [cpuset] root 12 0.0 0.0 0 0 ? S 15:58 0:00 [khelper] root 13 0.0 0.0 0 0 ? S 15:58 0:00 [async/mgr] root 14 0.0 0.0 0 0 ? S 15:58 0:00 [pm] root 16 0.0 0.0 0 0 ? S 15:58 0:00 [sync_supers] root 17 0.0 0.0 0 0 ? S 15:58 0:00 [bdi-default] root 18 0.0 0.0 0 0 ? S 15:58 0:00 [kintegrityd/0] root 19 0.0 0.0 0 0 ? S 15:58 0:00 [kintegrityd/1] root 20 0.0 0.0 0 0 ? S 15:58 0:00 [kblockd/0] root 21 0.0 0.0 0 0 ? S 15:58 0:00 [kblockd/1] root 22 0.0 0.0 0 0 ? S 15:58 0:00 [kacpid] root 23 0.0 0.0 0 0 ? S 15:58 0:00 [kacpi_notify] root 24 0.0 0.0 0 0 ? S 15:58 0:00 [kacpi_hotplug] root 25 0.0 0.0 0 0 ? S 15:58 0:00 [ata/0] root 26 0.0 0.0 0 0 ? S 15:58 0:00 [ata/1] root 27 0.0 0.0 0 0 ? S 15:58 0:00 [ata_aux] root 28 0.0 0.0 0 0 ? S 15:58 0:00 [ksuspend_usbd] root 29 0.0 0.0 0 0 ? S 15:58 0:00 [khubd] root 30 0.0 0.0 0 0 ? S 15:58 0:00 [kseriod] root 31 0.0 0.0 0 0 ? S 15:58 0:00 [kmmcd] root 34 0.0 0.0 0 0 ? S 15:58 0:00 [khungtaskd] root 35 0.0 0.0 0 0 ? S 15:58 0:00 [kswapd0] root 36 0.0 0.0 0 0 ? SN 15:58 0:00 [ksmd] root 37 0.0 0.0 0 0 ? S 15:58 0:00 [aio/0] root 38 0.0 0.0 0 0 ? S 15:58 0:00 [aio/1] root 39 0.0 0.0 0 0 ? S 15:58 0:00 [ecryptfs-kthrea] root 40 0.0 0.0 0 0 ? S 15:58 0:00 [crypto/0] root 41 0.0 0.0 0 0 ? S 15:58 0:00 [crypto/1] root 48 0.0 0.0 0 0 ? S 15:58 0:03 [scsi_eh_0] root 50 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_1] root 53 0.0 0.0 0 0 ? S 15:58 0:00 [kstriped] root 54 0.0 0.0 0 0 ? S 15:58 0:00 [kmpathd/0] root 55 0.0 0.0 0 0 ? S 15:58 0:00 [kmpathd/1] root 56 0.0 0.0 0 0 ? S 15:58 0:00 [kmpath_handlerd] root 57 0.0 0.0 0 0 ? S 15:58 0:00 [ksnapd] root 58 0.0 0.0 0 0 ? S 15:58 0:03 [kondemand/0] root 59 0.0 0.0 0 0 ? S 15:58 0:02 [kondemand/1] root 60 0.0 0.0 0 0 ? S 15:58 0:00 [kconservative/0] root 61 0.0 0.0 0 0 ? S 15:58 0:00 [kconservative/1] root 213 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_2] root 222 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_3] root 234 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_4] root 235 0.0 0.0 0 0 ? S 15:58 0:01 [usb-storage] root 255 0.0 0.0 0 0 ? S 15:58 0:00 [jbd2/sda5-8] root 256 0.0 0.0 0 0 ? S 15:58 0:00 [ext4-dio-unwrit] root 257 0.0 0.0 0 0 ? S 15:58 0:00 [ext4-dio-unwrit] root 290 0.0 0.0 0 0 ? S 15:58 0:00 [flush-8:0] root 318 0.0 0.0 2316 888 ? S 15:58 0:00 upstart-udev-bridge --daemon root 321 0.0 0.0 2616 1024 ? S<s 15:58 0:00 udevd --daemon root 526 0.0 0.0 0 0 ? S 15:58 0:00 [kpsmoused] root 528 0.0 0.0 0 0 ? S 15:58 0:00 [led_workqueue] root 650 0.0 0.0 0 0 ? S 15:58 0:00 [radeon/0] root 651 0.0 0.0 0 0 ? S 15:58 0:00 [radeon/1] root 652 0.0 0.0 0 0 ? S 15:58 0:00 [ttm_swap] root 654 0.0 0.0 2612 984 ? S< 15:58 0:00 udevd --daemon root 656 0.0 0.0 0 0 ? S 15:58 0:00 [hd-audio0] root 657 0.0 0.0 2612 916 ? S< 15:58 0:00 udevd --daemon root 674 0.6 0.0 0 0 ? S 15:58 0:57 [phy0] syslog 715 0.0 0.0 34812 1776 ? Sl 15:58 0:00 rsyslogd -c4 102 731 0.0 0.0 3236 1512 ? Ss 15:58 0:02 dbus-daemon --system --fork root 740 0.0 0.1 19088 3380 ? Ssl 15:58 0:00 gdm-binary root 744 0.0 0.1 18900 4032 ? Ssl 15:58 0:01 NetworkManager avahi 749 0.0 0.0 2928 1520 ? S 15:58 0:00 avahi-daemon: running [alexandros-laptop.local] avahi 752 0.0 0.0 2928 544 ? Ss 15:58 0:00 avahi-daemon: chroot helper root 753 0.0 0.1 4172 2300 ? S 15:58 0:00 /usr/sbin/modem-manager root 762 0.0 0.1 20584 3152 ? Sl 15:58 0:00 /usr/sbin/console-kit-daemon --no-daemon root 836 0.0 0.1 20856 3864 ? Sl 15:58 0:00 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Display1 root 856 0.0 0.1 4836 2388 ? S 15:58 0:00 /sbin/wpa_supplicant -u -s root 868 2.3 1.3 36932 27924 tty7 Rs+ 15:58 3:22 /usr/bin/X :0 -nr -verbose -auth /var/run/gdm/auth-for-gdm-a46T4j/database -nolisten root 891 0.0 0.0 1792 564 tty4 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty4 root 901 0.0 0.0 1792 564 tty5 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty5 root 908 0.0 0.0 1792 564 tty2 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty2 root 910 0.0 0.0 1792 568 tty3 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty3 root 913 0.0 0.0 1792 564 tty6 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty6 root 917 0.0 0.0 2180 1072 ? Ss 15:58 0:00 acpid -c /etc/acpi/events -s /var/run/acpid.socket daemon 924 0.0 0.0 2248 432 ? Ss 15:58 0:00 atd root 927 0.0 0.0 2376 900 ? Ss 15:58 0:00 cron root 950 0.0 0.0 11736 1372 ? Ss 15:58 0:00 /usr/sbin/winbindd root 958 0.0 0.0 11736 1184 ? S 15:58 0:00 /usr/sbin/winbindd root 974 0.0 0.1 6832 2580 ? Ss 15:58 0:00 /usr/sbin/cupsd -C /etc/cups/cupsd.conf root 1078 0.0 0.0 1792 564 tty1 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty1 gdm 1097 0.0 0.0 3392 772 ? S 15:58 0:00 /usr/bin/dbus-launch --exit-with-session root 1112 0.0 0.1 19216 3292 ? Sl 15:58 0:00 /usr/lib/gdm/gdm-session-worker root 1116 0.0 0.1 5540 2932 ? S 15:58 0:01 /usr/lib/upower/upowerd root 1131 0.0 0.1 6308 3824 ? S 15:58 0:00 /usr/lib/policykit-1/polkitd 108 1163 0.0 0.2 16788 4360 ? Ssl 15:58 0:01 /usr/sbin/hald root 1164 0.0 0.0 3536 1300 ? S 15:58 0:00 hald-runner root 1188 0.0 0.0 3612 1256 ? S 15:58 0:00 hald-addon-input: Listening on /dev/input/event6 /dev/input/event5 /dev/input/event2 root 1194 0.0 0.0 3612 1224 ? S 15:58 0:00 /usr/lib/hal/hald-addon-rfkill-killswitch root 1200 0.0 0.0 3608 1240 ? S 15:58 0:00 /usr/lib/hal/hald-addon-generic-backlight root 1202 0.0 0.0 3616 1236 ? S 15:58 0:02 hald-addon-storage: polling /dev/sr0 (every 2 sec) root 1204 0.0 0.0 3616 1236 ? S 15:58 0:00 hald-addon-storage: polling /dev/sdb (every 2 sec) root 1211 0.0 0.0 3624 1220 ? S 15:58 0:00 /usr/lib/hal/hald-addon-cpufreq 108 1212 0.0 0.0 3420 1200 ? S 15:58 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 1000 1222 0.0 0.1 24196 2816 ? Sl 15:58 0:00 /usr/bin/gnome-keyring-daemon --daemonize --login 1000 1240 0.0 0.3 28228 7312 ? Ssl 15:58 0:00 gnome-session 1000 1274 0.0 0.0 3284 356 ? Ss 15:58 0:00 /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session gnome-session 1000 1277 0.0 0.0 3392 772 ? S 15:58 0:00 /usr/bin/dbus-launch --exit-with-session gnome-session 1000 1278 0.0 0.0 3160 1652 ? Ss 15:58 0:00 /bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 1000 1281 0.0 0.2 8172 4636 ? S 15:58 0:00 /usr/lib/libgconf2-4/gconfd-2 1000 1287 0.0 0.5 24228 10896 ? Ss 15:58 0:03 /usr/lib/gnome-settings-daemon/gnome-settings-daemon 1000 1290 0.0 0.1 6468 2364 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd 1000 1293 0.0 0.6 38104 13004 ? S 15:58 0:03 metacity 1000 1296 0.0 0.1 30280 2628 ? Ssl 15:58 0:00 /usr/lib/gvfs//gvfs-fuse-daemon /home/alexandros/.gvfs 1000 1301 0.0 0.0 3344 988 ? S 15:58 0:03 syndaemon -i 0.5 -k 1000 1303 0.0 0.1 8060 3488 ? S 15:58 0:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor root 1306 0.0 0.1 15692 3104 ? Sl 15:58 0:00 /usr/lib/udisks/udisks-daemon 1000 1307 0.4 1.0 50748 21684 ? S 15:58 0:34 python -u /usr/share/screenlets/DigiClock/DigiClockScreenlet.py 1000 1308 0.0 0.9 35608 18564 ? S 15:58 0:00 python /usr/share/screenlets-manager/screenlets-daemon.py 1000 1309 0.0 0.3 19524 6468 ? S 15:58 0:00 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 1000 1311 0.0 0.5 37412 11788 ? S 15:58 0:01 gnome-power-manager 1000 1312 0.0 1.0 50772 22628 ? S 15:58 0:03 gnome-panel 1000 1313 0.1 1.5 102648 31184 ? Sl 15:58 0:10 nautilus root 1314 0.0 0.0 5188 996 ? S 15:58 0:02 udisks-daemon: polling /dev/sdb /dev/sr0 1000 1315 0.0 0.6 51948 12464 ? SL 15:58 0:01 nm-applet --sm-disable 1000 1317 0.0 0.1 16956 2364 ? Sl 15:58 0:00 /usr/lib/gvfs/gvfs-afc-volume-monitor 1000 1318 0.0 0.3 20164 7792 ? S 15:58 0:00 bluetooth-applet 1000 1321 0.0 0.1 7260 2384 ? S 15:58 0:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor 1000 1323 0.0 0.5 37436 12124 ? S 15:58 0:00 /usr/lib/notify-osd/notify-osd 1000 1324 0.0 1.9 197928 40456 ? Ssl 15:58 0:06 /home/alexandros/.dropbox-dist/dropbox 1000 1329 0.0 0.3 20136 7968 ? S 15:58 0:00 /usr/bin/gnome-screensaver --no-daemon 1000 1331 0.0 0.1 7056 3112 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-trash --spawner :1.6 /org/gtk/gvfs/exec_spaw/0 root 1340 0.0 0.0 2236 1008 ? S 15:58 0:00 /sbin/dhclient -d -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/dhcl 1000 1348 0.0 0.1 42252 3680 ? Ssl 15:58 0:00 /usr/lib/bonobo-activation/bonobo-activation-server --ac-activate --ior-output-fd=19 1000 1384 0.0 1.7 80244 35480 ? Sl 15:58 0:02 /usr/bin/python /usr/lib/deskbar-applet/deskbar-applet/deskbar-applet --oaf-activate- 1000 1388 0.0 0.5 26196 11804 ? S 15:58 0:01 /usr/lib/gnome-panel/wnck-applet --oaf-activate-iid=OAFIID:GNOME_Wncklet_Factory --oa 1000 1393 0.1 0.5 25876 11548 ? S 15:58 0:08 /usr/lib/gnome-applets/multiload-applet-2 --oaf-activate-iid=OAFIID:GNOME_MultiLoadAp 1000 1394 0.0 0.5 25600 11140 ? S 15:58 0:03 /usr/lib/gnome-applets/cpufreq-applet --oaf-activate-iid=OAFIID:GNOME_CPUFreqApplet_F 1000 1415 0.0 0.5 39192 11156 ? S 15:58 0:01 /usr/lib/gnome-power-manager/gnome-inhibit-applet --oaf-activate-iid=OAFIID:GNOME_Inh 1000 1417 0.0 0.7 53544 15488 ? Sl 15:58 0:00 /usr/lib/gnome-applets/mixer_applet2 --oaf-activate-iid=OAFIID:GNOME_MixerApplet_Fact 1000 1419 0.0 0.4 23816 9068 ? S 15:58 0:00 /usr/lib/gnome-panel/notification-area-applet --oaf-activate-iid=OAFIID:GNOME_Notific 1000 1488 0.0 0.3 20964 7548 ? S 15:58 0:00 /usr/lib/gnome-disk-utility/gdu-notification-daemon 1000 1490 0.0 0.1 6608 2484 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-burn --spawner :1.6 /org/gtk/gvfs/exec_spaw/1 1000 1510 0.0 0.1 6348 2084 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-metadata 1000 1531 0.0 0.3 19472 6616 ? S 15:58 0:00 /usr/lib/gnome-user-share/gnome-user-share 1000 1535 0.0 0.4 77128 8392 ? Sl 15:58 0:00 /usr/lib/evolution/evolution-data-server-2.28 --oaf-activate-iid=OAFIID:GNOME_Evoluti 1000 1601 0.0 0.5 69576 11800 ? Sl 15:59 0:00 /usr/lib/evolution/2.28/evolution-alarm-notify 1000 1604 0.0 0.7 33924 15888 ? S 15:59 0:00 python /usr/share/system-config-printer/applet.py 1000 1701 0.0 0.5 37116 11968 ? S 15:59 0:00 update-notifier 1000 1892 4.5 7.0 406720 145312 ? Sl 17:11 3:09 /opt/google/chrome/chrome 1000 1896 0.0 0.1 69812 3680 ? S 17:11 0:02 /opt/google/chrome/chrome 1000 1898 0.0 0.6 91420 14080 ? S 17:11 0:00 /opt/google/chrome/chrome --type=zygote 1000 1916 0.2 1.3 140780 27220 ? Sl 17:11 0:12 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1918 0.7 1.8 155720 37912 ? Sl 17:11 0:31 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1921 0.0 1.0 135904 21052 ? Sl 17:11 0:02 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1927 6.5 3.6 194604 74960 ? Sl 17:11 4:32 /opt/google/chrome/chrome --type=renderer --disable-client-side-phishing-detection -- 1000 2156 0.4 0.7 48344 14896 ? Rl 18:03 0:04 gnome-terminal 1000 2157 0.0 0.0 1988 712 ? S 18:03 0:00 gnome-pty-helper 1000 2158 0.0 0.1 6504 3860 pts/0 Ss 18:03 0:00 bash 1000 2564 0.2 0.1 6624 3984 pts/1 Ss+ 18:17 0:00 bash 1000 2711 0.0 0.0 4208 1352 ? S 18:19 0:00 /bin/bash /home/alexandros/Programme/TeamSpeak3-Client-linux_x86_back/ts3client_runsc 1000 2714 36.5 1.5 210872 31960 ? SLl 18:19 0:18 ./ts3client_linux_x86 1000 2743 0.0 0.0 2716 1068 pts/0 R+ 18:20 0:00 ps aux Output of vmstat: alexandros@alexandros-laptop:~$ vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 1093324 69840 449496 0 0 27 10 476 667 6 2 91 1 Output of lsusb alexandros@alexandros-laptop:~$ lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon X2300 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) The Team Speak log file : 2011-06-19 19:04:04.223522|INFO | | | Logging started, clientlib version: 3.0.0-rc2 [Build: 14642] 2011-06-19 19:04:04.761149|ERROR |SoundBckndIntf| | /home/alexandros/Programme/TeamSpeak3-Client-linux_x86_back/soundbackends/libpulseaudio_linux_x86.so error: NOT_CONNECTED 2011-06-19 19:04:05.871770|INFO |ClientUI | | Failed to init text to speech engine 2011-06-19 19:04:05.894623|INFO |ClientUI | | TeamSpeak 3 client version: 3.0.0-rc2 [Build: 14642] 2011-06-19 19:04:05.895421|INFO |ClientUI | | Qt version: 4.7.2 2011-06-19 19:04:05.895571|INFO |ClientUI | | Using configuration location: /home/alexandros/.ts3client/ts3clientui_qt.conf 2011-06-19 19:04:06.559596|INFO |ClientUI | | Last update check was: Sa. Jun 18 00:08:43 2011 2011-06-19 19:04:06.560506|INFO | | | Checking for updates... 2011-06-19 19:04:07.357869|INFO | | | Update check, my version: 14642, latest version: 14642 2011-06-19 19:05:52.978481|INFO |PreProSpeex | 1| Speex version: 1.2rc1 2011-06-19 19:05:54.055347|INFO |UIHelpers | | setClientVolumeModifier: 10 -8 2011-06-19 19:05:54.057196|INFO |UIHelpers | | setClientVolumeModifier: 11 2 Thanks for taking the time to read my message. UPDATE: Thanks to nickguletskii's link I googled for "alsa cpu usage" (without quotes) and it brought me to a forum. A user wrote that by directly selecting the hardware with "plughw:x.x" won't impact the performance of the system. I have selected it in the TS 3 configuration and it worked. But this solution is not optimal because now no other program can access the sound output. If you need any further information or my question is unclear than please tell me.

    Read the article

  • help with fixing fwts errors log

    - by jasmines
    Here is an extract of results.log: MTRR validation. Test 1 of 3: Validate the kernel MTRR IOMEM setup. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xc0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute Write-Combining. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xfee01000 to 0xffffffff (PCI Bus 0000:00) has incorrect attribute Write-Protect. ==================================================================================================== Test 1 of 1: Kernel log error check. Kernel message: [ 0.208079] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ADVICE: This is not exactly a failure mode but a warning from the kernel. The _OSI() method has implemented a match to the 'Linux' query in the DSDT and this is redundant because the ACPI driver matches onto the Windows _OSI strings by default. FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1, HIGH Kernel message: [ 3.512783] ACPI Error : Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node f7425858), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) ADVICE: This is a bug picked up by the kernel, but as yet, the firmware test suite has no diagnostic advice for this particular problem. Found 1 unique errors in kernel log. ==================================================================================================== Check if system is using latest microcode. ---------------------------------------------------------------------------------------------------- Cannot read microcode file /usr/share/misc/intel-microcode.dat. Aborted test, initialisation failed. ==================================================================================================== MSR register tests. FAILED [MEDIUM] MSRCPUsInconsistent: Test 1, MSR SYSENTER_ESP (0x175) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0xffffffffffffffff). MSR CPU 0 -> 0xf7bb9c40 vs CPU 1 -> 0xf7bc7c40 FAILED [MEDIUM] MSRCPUsInconsistent: Test 1, MSR MISC_ENABLE (0x1a0) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0x400c51889). MSR CPU 0 -> 0x850088 vs CPU 1 -> 0x850089 ==================================================================================================== Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices. ---------------------------------------------------------------------------------------------------- Test 1 of 1: Check firmware settings MaxReadReq for PCI Express devices. MaxReadReq for pci://00:00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) is low (128) [Audio device]. MaxReadReq for pci://00:02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection is low (128) [Network controller]. FAILED [LOW] LowMaxReadReq: Test 1, 2 devices have low MaxReadReq settings. Firmware may have configured these too low. ADVICE: The MaxReadRequest size is set too low and will affect performance. It will provide excellent bus sharing at the cost of bus data transfer rates. Although not a critical issue, it may be worth considering setting the MaxReadRequest size to 256 or 512 to increase throughput on the PCI Express bus. Some drivers (for example the Brocade Fibre Channel driver) allow one to override the firmware settings. Where possible, this BIOS configuration setting is worth increasing it a little more for better performance at a small reduction of bus sharing. ==================================================================================================== PCIe ASPM check. ---------------------------------------------------------------------------------------------------- Test 1 of 2: PCIe ASPM ACPI test. PCIE ASPM is not controlled by Linux kernel. ADVICE: BIOS reports that Linux kernel should not modify ASPM settings that BIOS configured. It can be intentional because hardware vendors identified some capability bugs between the motherboard and the add-on cards. Test 2 of 2: PCIe ASPM registers test. WARNING: Test 2, RP 00h:1Ch.01h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.01h L1 not enabled. WARNING: Test 2, Device 02h:00h.00h L0s not enabled. WARNING: Test 2, Device 02h:00h.00h L1 not enabled. PASSED: Test 2, PCIE aspm setting matched was matched. WARNING: Test 2, RP 00h:1Ch.05h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.05h L1 not enabled. WARNING: Test 2, Device 85h:00h.00h L0s not enabled. WARNING: Test 2, Device 85h:00h.00h L1 not enabled. PASSED: Test 2, PCIE aspm setting matched was matched. ==================================================================================================== Extract and analyse Windows Management Instrumentation (WMI). Test 1 of 2: Check Windows Management Instrumentation in DSDT Found WMI Method WMAA with GUID: 5FB7F034-2C63-45E9-BE91-3D44E2C707E4, Instance 0x01 Found WMI Event, Notifier ID: 0x80, GUID: 95F24279-4D7B-4334-9387-ACCDC67EF61C, Instance 0x01 PASSED: Test 1, GUID 95F24279-4D7B-4334-9387-ACCDC67EF61C is handled by driver hp-wmi (Vendor: HP). Found WMI Event, Notifier ID: 0xa0, GUID: 2B814318-4BE8-4707-9D84-A190A859B5D0, Instance 0x01 FAILED [MEDIUM] WMIUnknownGUID: Test 1, GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 is unknown to the kernel, a driver may need to be implemented for this GUID. ADVICE: A WMI driver probably needs to be written for this event. It can checked for using: wmi_has_guid("2B814318-4BE8-4707-9D84-A190A859B5D0"). One can install a notify handler using wmi_install_notify_handler("2B814318-4BE8-4707-9D84-A190A859B5D0", handler, NULL). http://lwn.net/Articles/391230 describes how to write an appropriate driver. Found WMI Object, Object ID AB, GUID: 05901221-D566-11D1-B2F0-00A0C9062910, Instance 0x01, Flags: 00 Found WMI Method WMBA with GUID: 1F4C91EB-DC5C-460B-951D-C7CB9B4B8D5E, Instance 0x01 Found WMI Object, Object ID BC, GUID: 2D114B49-2DFB-4130-B8FE-4A3C09E75133, Instance 0x7f, Flags: 00 Found WMI Object, Object ID BD, GUID: 988D08E3-68F4-4C35-AF3E-6A1B8106F83C, Instance 0x19, Flags: 00 Found WMI Object, Object ID BE, GUID: 14EA9746-CE1F-4098-A0E0-7045CB4DA745, Instance 0x01, Flags: 00 Found WMI Object, Object ID BF, GUID: 322F2028-0F84-4901-988E-015176049E2D, Instance 0x01, Flags: 00 Found WMI Object, Object ID BG, GUID: 8232DE3D-663D-4327-A8F4-E293ADB9BF05, Instance 0x01, Flags: 00 Found WMI Object, Object ID BH, GUID: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A, Instance 0x00, Flags: 00 Found WMI Object, Object ID BI, GUID: 8F1F6435-9F42-42C8-BADC-0E9424F20C9A, Instance 0x00, Flags: 00 Found WMI Method WMAC with GUID: 7391A661-223A-47DB-A77A-7BE84C60822D, Instance 0x01 Found WMI Object, Object ID BJ, GUID: DF4E63B6-3BBC-4858-9737-C74F82F821F3, Instance 0x05, Flags: 00 ==================================================================================================== Disassemble DSDT to check for _OSI("Linux"). ---------------------------------------------------------------------------------------------------- Test 1 of 1: Disassemble DSDT to check for _OSI("Linux"). This is not strictly a failure mode, it just alerts one that this has been defined in the DSDT and probably should be avoided since the Linux ACPI driver matches onto the Windows _OSI strings { If (_OSI ("Linux")) { Store (0x03E8, OSYS) } If (_OSI ("Windows 2001")) { Store (0x07D1, OSYS) } If (_OSI ("Windows 2001 SP1")) { Store (0x07D1, OSYS) } If (_OSI ("Windows 2001 SP2")) { Store (0x07D2, OSYS) } If (_OSI ("Windows 2006")) { Store (0x07D6, OSYS) } If (LAnd (MPEN, LEqual (OSYS, 0x07D1))) { TRAP (0x01, 0x48) } TRAP (0x03, 0x35) } WARNING: Test 1, DSDT implements a deprecated _OSI("Linux") test. ==================================================================================================== 0 passed, 0 failed, 1 warnings, 0 aborted, 0 skipped, 0 info only. ==================================================================================================== ACPI DSDT Method Semantic Tests. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP Failed to install global event handler. Test 22 of 93: Check _PSR (Power Source). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 22, Detected an infinite loop when evaluating method '\_SB_.AC__._PSR'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 22, \_SB_.AC__._PSR correctly acquired and released locks 16 times. Test 35 of 93: Check _TMP (Thermal Zone Current Temp). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.DTSZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.DTSZ._TMP correctly acquired and released locks 14 times. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.CPUZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.CPUZ._TMP correctly acquired and released locks 10 times. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.SKNZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.SKNZ._TMP correctly acquired and released locks 10 times. PASSED: Test 35, _TMP correctly returned sane looking value 0x00000b4c (289.2 degrees K) PASSED: Test 35, \_TZ_.BATZ._TMP correctly acquired and released locks 9 times. PASSED: Test 35, _TMP correctly returned sane looking value 0x00000aac (273.2 degrees K) PASSED: Test 35, \_TZ_.FDTZ._TMP correctly acquired and released locks 7 times. Test 46 of 93: Check _DIS (Disable). FAILED [MEDIUM] MethodShouldReturnNothing: Test 46, \_SB_.PCI0.LPCB.SIO_.COM1._DIS returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. FAILED [MEDIUM] MethodShouldReturnNothing: Test 46, \_SB_.PCI0.LPCB.SIO_.LPT0._DIS returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. Test 61 of 93: Check _WAK (System Wake). Test _WAK(1) System Wake, State S1. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(2) System Wake, State S2. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(3) System Wake, State S3. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(4) System Wake, State S4. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(5) System Wake, State S5. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test 87 of 93: Check _BCL (Query List of Brightness Control Levels Supported). Package has 2 elements: 00: INTEGER: 0x00000000 01: INTEGER: 0x00000000 FAILED [MEDIUM] Method_BCLElementCount: Test 87, Method _BCL should return a package of more than 2 integers, got just 2. Test 88 of 93: Check _BCM (Set Brightness Level). ACPICA Exception AE_AML_PACKAGE_LIMIT during execution of method _BCM FAILED [CRITICAL] AEAMLPackgeLimit: Test 88, Detected error 'Package limit' when evaluating '\_SB_.PCI0.GFX0.DD02._BCM'. ==================================================================================================== ACPI table settings sanity checks. ---------------------------------------------------------------------------------------------------- Test 1 of 1: Check ACPI tables. PASSED: Test 1, Table APIC passed. Table ECDT not present to check. FAILED [MEDIUM] FADT32And64BothDefined: Test 1, FADT 32 bit FIRMWARE_CONTROL is non-zero, and X_FIRMWARE_CONTROL is also non-zero. Section 5.2.9 of the ACPI specification states that if the FIRMWARE_CONTROL is non-zero then X_FIRMWARE_CONTROL must be set to zero. ADVICE: The FADT FIRMWARE_CTRL is a 32 bit pointer that points to the physical memory address of the Firmware ACPI Control Structure (FACS). There is also an extended 64 bit version of this, the X_FIRMWARE_CTRL pointer that also can point to the FACS. Section 5.2.9 of the ACPI specification states that if the X_FIRMWARE_CTRL field contains a non zero value then the FIRMWARE_CTRL field *must* be zero. This error is also detected by the Linux kernel. If FIRMWARE_CTRL and X_FIRMWARE_CTRL are defined, then the kernel just uses the 64 bit version of the pointer. PASSED: Test 1, Table HPET passed. PASSED: Test 1, Table MCFG passed. PASSED: Test 1, Table RSDT passed. PASSED: Test 1, Table RSDP passed. Table SBST not present to check. PASSED: Test 1, Table XSDT passed. ==================================================================================================== Re-assemble DSDT and find syntax errors and warnings. ---------------------------------------------------------------------------------------------------- Test 1 of 2: Disassemble and reassemble DSDT FAILED [HIGH] AMLAssemblerError4043: Test 1, Assembler error in line 2261 Line | AML source ---------------------------------------------------------------------------------------------------- 02258| 0x00000000, // Range Minimum 02259| 0xFEDFFFFF, // Range Maximum 02260| 0x00000000, // Translation Offset 02261| 0x00000000, // Length | ^ | error 4043: Invalid combination of Length and Min/Max fixed flags 02262| ,, _Y0E, AddressRangeMemory, TypeStatic) 02263| DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 02264| 0x00000000, // Granularity ==================================================================================================== ADVICE: (for error #4043): This occurs if the length is zero and just one of the resource MIF/MAF flags are set, or the length is non-zero and resource MIF/MAF flags are both set. These are illegal combinations and need to be fixed. See section 6.4.3.5 Address Space Resource Descriptors of version 4.0a of the ACPI specification for more details. FAILED [HIGH] AMLAssemblerError4050: Test 1, Assembler error in line 2268 Line | AML source ---------------------------------------------------------------------------------------------------- 02265| 0xFEE01000, // Range Minimum 02266| 0xFFFFFFFF, // Range Maximum 02267| 0x00000000, // Translation Offset 02268| 0x011FEFFF, // Length | ^ | error 4050: Length is not equal to fixed Min/Max window 02269| ,, , AddressRangeMemory, TypeStatic) 02270| }) 02271| Method (_CRS, 0, Serialized) ==================================================================================================== ADVICE: (for error #4050): The minimum address is greater than the maximum address. This is illegal. FAILED [HIGH] AMLAssemblerError1104: Test 1, Assembler error in line 8885 Line | AML source ---------------------------------------------------------------------------------------------------- 08882| Method (_DIS, 0, NotSerialized) 08883| { 08884| DSOD (0x02) 08885| Return (0x00) | ^ | warning level 0 1104: Reserved method should not return a value (_DIS) 08886| } 08887| 08888| Method (_SRS, 1, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 1, Assembler error in line 9195 Line | AML source ---------------------------------------------------------------------------------------------------- 09192| Method (_DIS, 0, NotSerialized) 09193| { 09194| DSOD (0x01) 09195| Return (0x00) | ^ | warning level 0 1104: Reserved method should not return a value (_DIS) 09196| } 09197| 09198| Method (_SRS, 1, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1127: Test 1, Assembler error in line 9242 Line | AML source ---------------------------------------------------------------------------------------------------- 09239| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y21._MAX, MAX2) 09240| CreateByteField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y21._LEN, LEN2) 09241| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y22._INT, IRQ0) 09242| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y23._DMA, DMA0) | ^ | warning level 0 1127: ResourceTag smaller than Field (Tag: 8 bits, Field: 16 bits) 09243| If (RLPD) 09244| { 09245| Store (0x00, Local0) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1128: Test 1, Assembler error in line 18682 Line | AML source ---------------------------------------------------------------------------------------------------- 18679| Store (0x01, Index (DerefOf (Index (Local0, 0x02)), 0x01)) 18680| If (And (WDPE, 0x40)) 18681| { 18682| Wait (\_SB.BEVT, 0x10) | ^ | warning level 0 1128: Result is not used, possible operator timeout will be missed 18683| } 18684| 18685| Store (BRID, Index (DerefOf (Index (Local0, 0x02)), 0x02)) ==================================================================================================== ADVICE: (for warning level 0 #1128): The operation can possibly timeout, and hence the return value indicates an timeout error. However, because the return value is not checked this very probably indicates that the code is buggy. A possible scenario is that a mutex times out and the code attempts to access data in a critical region when it should not. This will lead to undefined behaviour. This should be fixed. Table DSDT (0) reassembly: Found 2 errors, 4 warnings. Test 2 of 2: Disassemble and reassemble SSDT PASSED: Test 2, SSDT (0) reassembly, Found 0 errors, 0 warnings. FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 60 Line | AML source ---------------------------------------------------------------------------------------------------- 00057| { 00058| Store (CPDC (Arg0), Local0) 00059| GCAP (Local0) 00060| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00061| } 00062| 00063| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 174 Line | AML source ---------------------------------------------------------------------------------------------------- 00171| { 00172| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00173| GCAP (Local0) 00174| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00175| } 00176| 00177| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 244 Line | AML source ---------------------------------------------------------------------------------------------------- 00241| { 00242| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00243| GCAP (Local0) 00244| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00245| } 00246| 00247| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 290 Line | AML source ---------------------------------------------------------------------------------------------------- 00287| { 00288| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00289| GCAP (Local0) 00290| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00291| } 00292| 00293| Method (_OSC, 4, NotSerialized) ==================================================================================================== Table SSDT (1) reassembly: Found 0 errors, 4 warnings. PASSED: Test 2, SSDT (2) reassembly, Found 0 errors, 0 warnings. PASSED: Test 2, SSDT (3) reassembly, Found 0 errors, 0 warnings. ==================================================================================================== 3 passed, 10 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only. ==================================================================================================== Critical failures: 1 method test, at 1 log line: 1449: Detected error 'Package limit' when evaluating '\_SB_.PCI0.GFX0.DD02._BCM'. High failures: 11 klog test, at 1 log line: 121: HIGH Kernel message: [ 3.512783] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node f7425858), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) syntaxcheck test, at 1 log line: 1668: Assembler error in line 2261 syntaxcheck test, at 1 log line: 1687: Assembler error in line 2268 syntaxcheck test, at 1 log line: 1703: Assembler error in line 8885 syntaxcheck test, at 1 log line: 1716: Assembler error in line 9195 syntaxcheck test, at 1 log line: 1729: Assembler error in line 9242 syntaxcheck test, at 1 log line: 1742: Assembler error in line 18682 syntaxcheck test, at 1 log line: 1766: Assembler error in line 60 syntaxcheck test, at 1 log line: 1779: Assembler error in line 174 syntaxcheck test, at 1 log line: 1792: Assembler error in line 244 syntaxcheck test, at 1 log line: 1805: Assembler error in line 290 Medium failures: 9 mtrr test, at 1 log line: 76: Memory range 0xc0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute Write-Combining. mtrr test, at 1 log line: 78: Memory range 0xfee01000 to 0xffffffff (PCI Bus 0000:00) has incorrect attribute Write-Protect. msr test, at 1 log line: 165: MSR SYSENTER_ESP (0x175) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0xffffffffffffffff). msr test, at 1 log line: 173: MSR MISC_ENABLE (0x1a0) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0x400c51889). wmi test, at 1 log line: 528: GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 is unknown to the kernel, a driver may need to be implemented for this GUID. method test, at 1 log line: 1002: \_SB_.PCI0.LPCB.SIO_.COM1._DIS returned values, but was expected to return nothing. method test, at 1 log line: 1011: \_SB_.PCI0.LPCB.SIO_.LPT0._DIS returned values, but was expected to return nothing. method test, at 1 log line: 1443: Method _BCL should return a package of more than 2 integers, got just 2. acpitables test, at 1 log line: 1643: FADT 32 bit FIRMWARE_CONTROL is non-zero, and X_FIRMWARE_CONTROL is also non-zero. Se

    Read the article

  • Handling TclErrors in Python

    - by anteater7171
    In the following code I'll get the following error if I right click the window that pops up. Then go down to the very bottom entry widget then delete it's contents. It seems to be giving me a TclError. How do I go about handeling such an error? The Error Exception in Tkinter callback Traceback (most recent call last): File "C:\Python26\Lib\lib-tk\Tkinter.py", line 1410, in __call__ return self.func(*args) File "C:\Python26\CPUDEMO.py", line 503, in I TL.sclS.set(S1) File "C:\Python26\Lib\lib-tk\Tkinter.py", line 2765, in set self.tk.call(self._w, 'set', value) TclError: expected floating-point number but got "" The Code #F #PIthon.py # Import/Setup import Tkinter import psutil,time import re from PIL import Image, ImageTk from time import sleep class simpleapp_tk(Tkinter.Tk): def __init__(self,parent): Tkinter.Tk.__init__(self,parent) self.parent = parent self.initialize() def initialize(self): Widgets self.menu = Tkinter.Menu(self, tearoff = 0 ) M = [ "Options...", "Exit"] self.selectedM = Tkinter.StringVar() self.menu.add_radiobutton( label = 'Hide', variable = self.selectedM, command = self.E ) self.menu.add_radiobutton( label = 'Bump', variable = self.selectedM, command = self.E ) self.menu.add_separator() self.menu.add_radiobutton( label = 'Options...', variable = self.selectedM, command = self.E ) self.menu.add_separator() self.menu.add_radiobutton( label = 'Exit', variable = self.selectedM, command = self.E ) self.frame1 = Tkinter.Frame(self,bg='grey15',relief='ridge',borderwidth=4,width=185, height=39) self.frame1.grid() self.frame1.grid_propagate(0) self.frame1.bind( "<Button-3><ButtonRelease-3>", self.D ) self.frame1.bind( "<Button-2><ButtonRelease-2>", self.C ) self.frame1.bind( "<Double-Button-1>", self.C ) self.labelVariable = Tkinter.StringVar() self.label = Tkinter.Label(self.frame1,textvariable=self.labelVariable,fg="lightgreen",bg="grey15",borderwidth=1,font=('arial', 10, 'bold')) self.label.grid(column=1,row=0,columnspan=1,sticky='nsew') self.label.bind( "<Button-3><ButtonRelease-3>", self.D ) self.label.bind( "<Button-2><ButtonRelease-2>", self.C ) self.label.bind( "<Double-Button-1>", self.C ) self.F() self.overrideredirect(1) self.wm_attributes("-topmost", 1) global TL1 TL1 = Tkinter.Toplevel(self) TL1.wm_geometry("+0+5000") TL1.overrideredirect(1) TL1.button = Tkinter.Button(TL1,text="? CPU",fg="lightgreen",bg="grey15",activeforeground="lightgreen", activebackground='grey15',borderwidth=4,font=('Arial', 8, 'bold'),command=self.J) TL1.button.pack(ipadx=1) Events def Reset(self): self.label.configure(font=('arial', 10, 'bold'),fg='Lightgreen',bg='grey15',borderwidth=0) self.labela.configure(font=('arial', 8, 'bold'),fg='Lightgreen',bg='grey15',borderwidth=0) self.frame1.configure(bg='grey15',relief='ridge',borderwidth=4,width=224, height=50) self.label.pack(ipadx=38) def helpmenu(self): t2 = Tkinter.Toplevel(self) Tkinter.Label(t2, text='This is a help menu', anchor="w",justify="left",fg="darkgreen",bg="grey90",relief="ridge",borderwidth=5,font=('Arial', 10)).pack(fill='both', expand=1) t2.resizable(False,False) t2.title('Help') menu = Tkinter.Menu(self) t2.config(menu=menu) filemenu = Tkinter.Menu(menu) menu.add_cascade(label="| Exit |", menu=filemenu) filemenu.add_command(label="Exit", command=t2.destroy) def aboutmenu(self): t1 = Tkinter.Toplevel(self) Tkinter.Label(t1, text=' About:\n\n CPU Usage v1.0\n\n Publisher: Drew French\n Date: 05/09/10\n Email: [email protected] \n\n\n\n\n\n\n Written in Python 2.6.4', anchor="w",justify="left",fg="darkgreen",bg="grey90",relief="sunken",borderwidth=5,font=('Arial', 10)).pack(fill='both', expand=1) t1.resizable(False,False) t1.title('About') menu = Tkinter.Menu(self) t1.config(menu=menu) filemenu = Tkinter.Menu(menu) menu.add_cascade(label="| Exit |", menu=filemenu) filemenu.add_command(label="Exit", command=t1.destroy) def A (self,event): TL.entryVariable1.set(TL.sclY.get()) TL.entryVariable2.set(TL.sclX.get()) Y = TL.sclY.get() X = TL.sclX.get() self.wm_geometry("+" + str(X) + "+" + str(Y)) def B(self,event): Y1 = TL.entryVariable1.get() X1 = TL.entryVariable2.get() self.wm_geometry("+" + str(X1) + "+" + str(Y1)) TL.sclY.set(Y1) TL.sclX.set(X1) def C(self,event): s = self.wm_geometry() geomPatt = re.compile(r"(\d+)?x?(\d+)?([+-])(\d+)([+-])(\d+)") m = geomPatt.search(s) X3 = m.group(4) Y3 = m.group(6) M = int(Y3) - 150 P = M + 150 while Y3 > M: sleep(0.0009) Y3 = int(Y3) - 1 self.update_idletasks() self.wm_geometry("+" + str(X3) + "+" + str(Y3)) sleep(2.00) while Y3 < P: sleep(0.0009) Y3 = int(Y3) + 1 self.update_idletasks() self.wm_geometry("+" + str(X3) + "+" + str(Y3)) def D(self, event=None): self.menu.post( event.x_root, event.y_root ) def E(self): if self.selectedM.get() =='Options...': Setup global TL TL = Tkinter.Toplevel(self) menu = Tkinter.Menu(TL) TL.config(menu=menu) filemenu = Tkinter.Menu(menu) menu.add_cascade(label="| Menu |", menu=filemenu) filemenu.add_command(label="Instruction Manual...", command=self.helpmenu) filemenu.add_command(label="About...", command=self.aboutmenu) filemenu.add_separator() filemenu.add_command(label="Exit Options", command=TL.destroy) filemenu.add_command(label="Exit", command=self.destroy) helpmenu = Tkinter.Menu(menu) menu.add_cascade(label="| Help |", menu=helpmenu) helpmenu.add_command(label="Instruction Manual...", command=self.helpmenu) helpmenu.add_separator() helpmenu.add_command(label="Quick Help...", command=self.helpmenu) Title TL.label5 = Tkinter.Label(TL,text="CPU Usage: Options",anchor="center",fg="black",bg="lightgreen",relief="ridge",borderwidth=5,font=('Arial', 18, 'bold')) TL.label5.pack(padx=15,ipadx=5) X Y scale TL.separator = Tkinter.Frame(TL,height=7, bd=1, relief='ridge', bg='grey95') TL.separator.pack(pady=5,padx=5) # TL.sclX = Tkinter.Scale(TL.separator, from_=0, to=1500, orient='horizontal', resolution=1, command=self.A) TL.sclX.grid(column=1,row=0,ipadx=27, sticky='w') TL.label1 = Tkinter.Label(TL.separator,text="X",anchor="s",fg="black",bg="grey95",font=('Arial', 8 ,'bold')) TL.label1.grid(column=0,row=0, pady=1, sticky='S') TL.sclY = Tkinter.Scale(TL.separator, from_=0, to=1500, resolution=1, command=self.A) TL.sclY.grid(column=2,row=1,rowspan=2,sticky='e', padx=4) TL.label3 = Tkinter.Label(TL.separator,text="Y",fg="black",bg="grey95",font=('Arial', 8 ,'bold')) TL.label3.grid(column=2,row=0, padx=10, sticky='e') TL.entryVariable2 = Tkinter.StringVar() TL.entry2 = Tkinter.Entry(TL.separator,textvariable=TL.entryVariable2, fg="grey15",bg="grey90",relief="sunken",insertbackground="black",borderwidth=5,font=('Arial', 10)) TL.entry2.grid(column=1,row=1,ipadx=20, pady=10,sticky='EW') TL.entry2.bind("<Return>", self.B) TL.label2 = Tkinter.Label(TL.separator,text="X:",fg="black",bg="grey95",font=('Arial', 8 ,'bold')) TL.label2.grid(column=0,row=1, ipadx=4, sticky='W') TL.entryVariable1 = Tkinter.StringVar() TL.entry1 = Tkinter.Entry(TL.separator,textvariable=TL.entryVariable1, fg="grey15",bg="grey90",relief="sunken",insertbackground="black",borderwidth=5,font=('Arial', 10)) TL.entry1.grid(column=1,row=2,sticky='EW') TL.entry1.bind("<Return>", self.B) TL.label4 = Tkinter.Label(TL.separator,text="Y:", anchor="center",fg="black",bg="grey95",font=('Arial', 8 ,'bold')) TL.label4.grid(column=0,row=2, ipadx=4, sticky='W') TL.label7 = Tkinter.Label(TL.separator,text="Text Colour:",fg="black",bg="grey95",font=('Arial', 8 ,'bold')) TL.label7.grid(column=1,row=3,stick="W",ipady=10) TL.selectedP = Tkinter.StringVar() TL.opt1 = Tkinter.OptionMenu(TL.separator, TL.selectedP,'Normal', 'White','Black', 'Blue', 'Steel Blue','Green','Light Green','Yellow','Orange' ,'Red',command=self.G) TL.opt1.config(fg="black",bg="grey90",activebackground="grey90",activeforeground="black", anchor="center",relief="raised",direction='right',font=('Arial', 10)) TL.opt1.grid(column=1,row=4,sticky='EW',padx=20,ipadx=20) TL.selectedP.set('Normal') TL.label7 = Tkinter.Label(TL.separator,text="Refresh Rate:",fg="black",bg="grey95",font=('Arial', 8 ,'bold')) TL.label7.grid(column=1,row=5,stick="W",ipady=10) TL.sclS = Tkinter.Scale(TL.separator, from_=10, to=2000, orient='horizontal', resolution=10, command=self.H) TL.sclS.grid(column=1,row=6,ipadx=27, sticky='w') TL.sclS.set(650) TL.entryVariableS = Tkinter.StringVar() TL.entryS = Tkinter.Entry(TL.separator,textvariable=TL.entryVariableS, fg="grey15",bg="grey90",relief="sunken",insertbackground="black",borderwidth=5,font=('Arial', 10)) TL.entryS.grid(column=1,row=7,ipadx=20, pady=10,sticky='EW') TL.entryS.bind("<Return>", self.I) TL.entryVariableS.set(650) # TL.resizable(False,False) TL.title('Options') geomPatt = re.compile(r"(\d+)?x?(\d+)?([+-])(\d+)([+-])(\d+)") s = self.wm_geometry() m = geomPatt.search(s) X = m.group(4) Y = m.group(6) TL.sclY.set(Y) TL.sclX.set(X) if self.selectedM.get() == 'Exit': self.destroy() if self.selectedM.get() == 'Bump': s = self.wm_geometry() geomPatt = re.compile(r"(\d+)?x?(\d+)?([+-])(\d+)([+-])(\d+)") m = geomPatt.search(s) X3 = m.group(4) Y3 = m.group(6) M = int(Y3) - 150 P = M + 150 while Y3 > M: sleep(0.0009) Y3 = int(Y3) - 1 self.update_idletasks() self.wm_geometry("+" + str(X3) + "+" + str(Y3)) sleep(2.00) while Y3 < P: sleep(0.0009) Y3 = int(Y3) + 1 self.update_idletasks() self.wm_geometry("+" + str(X3) + "+" + str(Y3)) if self.selectedM.get() == 'Hide': s = self.wm_geometry() geomPatt = re.compile(r"(\d+)?x?(\d+)?([+-])(\d+)([+-])(\d+)") m = geomPatt.search(s) X3 = m.group(4) Y3 = m.group(6) M = int(Y3) + 5000 self.update_idletasks() self.wm_geometry("+" + str(X3) + "+" + str(M)) TL1.wm_geometry("+0+190") def F (self): G = round(psutil.cpu_percent(), 1) G1 = str(G) + '%' self.labelVariable.set(G1) try: S2 = TL.entryVariableS.get() except ValueError, e: S2 = 650 except NameError: S2 = 650 self.after(int(S2), self.F) def G (self,event): if TL.selectedP.get() =='Normal': self.label.config( fg = 'lightgreen' ) TL1.button.config( fg = 'lightgreen',activeforeground='lightgreen') if TL.selectedP.get() =='Red': self.label.config( fg = 'red' ) TL1.button.config( fg = 'red',activeforeground='red') if TL.selectedP.get() =='Orange': self.label.config( fg = 'orange') TL1.button.config( fg = 'orange',activeforeground='orange') if TL.selectedP.get() =='Yellow': self.label.config( fg = 'yellow') TL1.button.config( fg = 'yellow',activeforeground='yellow') if TL.selectedP.get() =='Light Green': self.label.config( fg = 'lightgreen' ) TL1.button.config( fg = 'lightgreen',activeforeground='lightgreen') if TL.selectedP.get() =='Normal': self.label.config( fg = 'lightgreen' ) TL1.button.config( fg = 'lightgreen',activeforeground='lightgreen') if TL.selectedP.get() =='Steel Blue': self.label.config( fg = 'steelblue1' ) TL1.button.config( fg = 'steelblue1',activeforeground='steelblue1') if TL.selectedP.get() =='Blue': self.label.config( fg = 'blue') TL1.button.config( fg = 'blue',activeforeground='blue') if TL.selectedP.get() =='Green': self.label.config( fg = 'darkgreen' ) TL1.button.config( fg = 'darkgreen',activeforeground='darkgreen') if TL.selectedP.get() =='White': self.label.config( fg = 'white' ) TL1.button.config( fg = 'white',activeforeground='white') if TL.selectedP.get() =='Black': self.label.config( fg = 'black') TL1.button.config( fg = 'black',activeforeground='black') def H (self,event): TL.entryVariableS.set(TL.sclS.get()) S = TL.sclS.get() def I (self,event): S1 = TL.entryVariableS.get() TL.sclS.set(S1) TL.sclS.set(TL.sclS.get()) S1 = TL.entryVariableS.get() TL.sclS.set(S1) def J (self): s = self.wm_geometry() geomPatt = re.compile(r"(\d+)?x?(\d+)?([+-])(\d+)([+-])(\d+)") m = geomPatt.search(s) X3 = m.group(4) Y3 = m.group(6) M = int(Y3) - 5000 self.update_idletasks() self.wm_geometry("+" + str(X3) + "+" + str(M)) TL1.wm_geometry("+0+5000") Loop if name == "main": app = simpleapp_tk(None) app.mainloop()

    Read the article

  • Form contents not showing in email

    - by fmz
    This is a followup to a question I posted yesterday. I thought everything was working fine, but today, I am not getting any results in the email from the drop down field. Here is the form code in question: <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" name="purpose" style="width: 300px; height:35px;"> <option value="" selected="selected">-- Select One --</option> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> It is then processed in PHP and should output the selected option to an email, however the Reason for Contact line always comes through with nothing in it. Here is the PHP code: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> Any assistance would be greatly appreciated. Thanks!

    Read the article

  • How to insert sub root node in xml file

    - by pravakar
    Hi guys hope all are doing good. I want to create one sub root node in my xml file like, <CapitalJobsList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <JobAds> -- element to create <JobAd> <AdvertiserDetails> <AdvertiserId>718508549</AdvertiserId> <AdvertiserName>ABC</AdvertiserName> </AdvertiserDetails> <ConsultantDetails> <ContactName>Naga Divakar</ContactName> <ContactPhone>6239 7755</ContactPhone> <ContactEmail>[email protected]</ContactEmail> <ContactFax>12345678912</ContactFax> </ConsultantDetails> <JobAdDetails> <DateEntered>2009-10-03T21:09:35.500</DateEntered> <AdvertiserJobRef>83754865</AdvertiserJobRef> <Title>IT Operations Manager</Title> <DescriptionShort>Large scale/exciting projects Mentor and manage o...</DescriptionShort> <Description>Large scale/exciting projects Mentor and manage others Management/technical mix This is a fantastic opportunity to join a high profile client who is active across both the commercial and Government domain. As the IT Operations Manager you will be responsible for leading and mentoring a small team of Infrastructure Engineers to ensure the availability and performance of the IT infrastructure. You w</Description> <SalaryMin>0.00</SalaryMin> <SalaryMax>0.00</SalaryMax> <WorkType xsi:nil="true" /> <Location>) as [JobAd/JobAdDetails/Bullets], isnull(Job</Location> <PostCode>2600</PostCode> <ClosingDate>2009-11-01T00:00:00</ClosingDate> <Keywords xsi:nil="true" /> <ApplyEmail xsi:nil="true" /> <ApplyURL>http://jobview.careerone.com.au/GetJob.aspx?JobID=83754865</ApplyURL> </JobAdDetails> <JobAdOptions> <BlindPost xsi:nil="true" /> <AdFormatType xsi:nil="true" /> <AdTemplateName xsi:nil="true" /> <ShowContactDetails xsi:nil="true" /> <ShowSalary xsi:nil="true" /> <HasVideo xsi:nil="true" /> <ResumeRequired>1</ResumeRequired> <ResidentsOnly>0</ResidentsOnly> </JobAdOptions> <CategoryList> <Category xsi:nil="true" /> </CategoryList> <RegionsList> <Region>ACT</Region> </RegionsList> <LevelsList> <Level xsi:nil="true" /> </LevelsList> </JobAd> <JobAd> <AdvertiserDetails> <AdvertiserId>718508549</AdvertiserId> <AdvertiserName>ABC</AdvertiserName> </AdvertiserDetails> <ConsultantDetails> <ContactName>Naga Divakar</ContactName> <ContactPhone>6239 7755</ContactPhone> <ContactEmail>[email protected]</ContactEmail> <ContactFax>12345678912</ContactFax> </ConsultantDetails> <JobAdDetails> <DateEntered>2009-10-03T21:09:35.530</DateEntered> <AdvertiserJobRef>83731488</AdvertiserJobRef> <Title>SAP Developers Required in Canberra - 12 month contract</Title> <DescriptionShort>My client, a large government department in Canbe...</DescriptionShort> <Description>My client, a large government department in Canberra, seeks two SAP Developers for 12 month ongoing contracts. Two SAP Developers Required Expert level ABAP programming skills Large SAP landscape - SAP R/3, SAP Web, SAP BI, SAP ITS My client, a large government department in Canberra, seeks two SAP Developers for 12 month ongoing contracts. My client is a large government department in Canberra, a</Description> <SalaryMin>0.00</SalaryMin> <SalaryMax>0.00</SalaryMax> <WorkType xsi:nil="true" /> <Location>) as [JobAd/JobAdDetails/Bullets], isnull(Job</Location> <PostCode>2600</PostCode> <ClosingDate>2009-11-01T00:00:00</ClosingDate> <Keywords xsi:nil="true" /> <ApplyEmail xsi:nil="true" /> <ApplyURL>http://jobview.careerone.com.au/GetJob.aspx?JobID=83731488</ApplyURL> </JobAdDetails> <JobAdOptions> <BlindPost xsi:nil="true" /> <AdFormatType xsi:nil="true" /> <AdTemplateName xsi:nil="true" /> <ShowContactDetails xsi:nil="true" /> <ShowSalary xsi:nil="true" /> <HasVideo xsi:nil="true" /> <ResumeRequired>1</ResumeRequired> <ResidentsOnly>0</ResidentsOnly> </JobAdOptions> <CategoryList> <Category xsi:nil="true" /> </CategoryList> <RegionsList> <Region>ACT</Region> </RegionsList> <LevelsList> <Level xsi:nil="true" /> </LevelsList> </JobAd> </JobAds> </CapitalJobsList> I have used the sql query for xml path like: select r.advid as [JobAd/AdvertiserDetails/AdvertiserId], CompanyName as [JobAd/AdvertiserDetails/AdvertiserName], firstname +'' ''+ lastname as [JobAd/ConsultantDetails/ContactName], WorkPhone as [JobAd/ConsultantDetails/ContactPhone], AdvEmail as [JobAd/ConsultantDetails/ContactEmail], FaxNo as [JobAd/ConsultantDetails/ContactFax], Job_CreatedDate as [JobAd/JobAdDetails/DateEntered], Job_Id as [JobAd/JobAdDetails/AdvertiserJobRef], Job_Title as [JobAd/JobAdDetails/Title], substring(Job_Description,0,50)+''...'' as [JobAd/JobAdDetails/DescriptionShort], Job_Description as [JobAd/JobAdDetails/Description], CONVERT(DECIMAL(10,2),MinSalary) as [JobAd/JobAdDetails/SalaryMin], CONVERT(DECIMAL(10,2),MaxSalary) as [JobAd/JobAdDetails/SalaryMax], Job_Type as [JobAd/JobAdDetails/WorkType], isnull(Job_Bullets,'') as [JobAd/JobAdDetails/Bullets], isnull(Job_Location,'') as [JobAd/JobAdDetails/Location], Job_PostCode as [JobAd/JobAdDetails/PostCode], Job_ExpireDate as [JobAd/JobAdDetails/ClosingDate], Job_Keywords as [JobAd/JobAdDetails/Keywords], ApplyEmail as [JobAd/JobAdDetails/ApplyEmail], Job_BrandURL+Job_Id as [JobAd/JobAdDetails/ApplyURL], BlindPost as [JobAd/JobAdOptions/BlindPost], AdFormatType as [JobAd/JobAdOptions/AdFormatType], AdTemplateName as [JobAd/JobAdOptions/AdTemplateName], ShowContactDetails as [JobAd/JobAdOptions/ShowContactDetails], ShowSalary as [JobAd/JobAdOptions/ShowSalary], HasVideo as [JobAd/JobAdOptions/HasVideo], ResumeRequired as [JobAd/JobAdOptions/ResumeRequired], ResidentsOnly as [JobAd/JobAdOptions/ResidentsOnly], Job_Category as [JobAd/CategoryList/Category], Job_Location_State as [JobAd/RegionsList/Region], [Level] as [JobAd/LevelsList/Level] from DR_Adv_Registration r, DR_CareerOne_ACTJobs j where r.Advid = j.Advid and job_location_city like(''%'+''+ @City +''+'%'') and job_location_state in('''+ @State +''') and job_status=1 for xml path(''''), Root(''CapitalJobsList''),ELEMENTS XSINIL So, suggest me how to get the sub root node. Thanks in advance

    Read the article

  • SOA PARTNER COMMUNITY NEWSLETTER JULY 2012

    - by mseika
    SOA PARTNER COMMUNITY NEWSLETTER JULY 2012 Dear SOA partner community member To provide our community members the best of our knowledge, we want your feedback on our SOA Partner community. Thus we are organizing SOA Partner Community Survey 2012. We request you to participate in the survey and give your valuable feedback on various areas of marketing, sales and education. To continue our successful BPM Suite, Oracle is launching together with you Process Accelerators initiative. It’s your opportunity to co-develop and market predefined processes. Oracle Fusion Applications Design Patterns are a great tool to develop your SOA or BPM solution or process accelerators. To promote your SOA & BPM Specialization we continue to offer several benefits. This month we would like to highlight our Specialization Plaques - make sure you request one for your office! Our Fusion Middleware Summer Camps are booked out, if could not get a seat you can attend the SOA & BPM track @ Virtual Developer Day: Oracle Fusion Development Oracle demo systems offer´s two new demos: Business Driven Development based on BPM Suite & SOA Lifecycle Management. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Community SurveyProcess Accelerators KitPlaques SOA & BPM SpecializedSOA & BPM at Virtual Developer Day News from our Partners & CommunityOverview of SOA Diagnostics in 11.1.1.6 Business driven development(BDD) demo now available! SOA Lifecycle Management Oracle Fusion applications design patterns Updated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum COMMUNITY SURVEY Like every year we would like to get your feedback in our SOA Partner Community Survey 2012. Make sure that You attend to further develop our community and support our planning! It is key for us to get your feedback to prepare for the next fiscal year. Back to top PROCESS ACCELERATORS KIT Oracle is very interested to co-develop and market with you, our partners, pre-defined processes for BPM Suite.I am very happy to announce a new program called “Oracle BPM Partner Solution Catalog”. This program will provide a one-stop shop for our customers looking for Oracle BPM partner solutions available in the market today.The Oracle BPM Solution Catalog will be hosted on our very popular Oracle Technology Network (OTN). To give you an idea of the scale of customer visibility, OTN today receives over 1Million hits per day from our business and developer community. We would like to invite you to list your Oracle BPM 11g solutions available today.In order to participate in this program, you need to do the following: Fill in the attached slide templates - #3 and #4 for each Oracle BPM 11g solution you would like to list on OTN.Please add links to whitepapers , videos, references to the specific solution in the template slide. We recommend that you create a landing page on your website for these linked artifacts and just point to the same from within the PowerPoint template. This will give you the flexibility to update the information as frequently as needed. If you have the particular solution in production or a reference available, please list them as well. Send the PowerPoint template slides (1 set of slides for each Oracle BPM solution) to [email protected]. In addition to having the opportunity to list your solutions on OTN for Oracle customers, you will have the chance to advertise your new wins/implementations/solutions in an Oracle Sponsored PM Webinar held every quarter. This program is targeted to go live by the end of summer 2012. At this point, we are targeting a soft launch in July end 2012 so send on your BPM solutions information as soon as possible. We would love to have your solution(s) listed in the “Oracle BPM Partner Solution Catalog” at the time of the launch. This will be a live repository so you can keep adding more solutions as they become available. If you have any questions, please feel free to contact us [email protected], Product Strategy Director, Oracle BPM , Phone +1 650.506.5486.Thank you and look forward to hearing from you. Oracle BPM team Process Accelerators Overview.pdf ProcessAcceleratorsDataSheet.pdf Demos draUPK.zip & trmUPK.zip BPM Solution repository slides.ppt Additional BPM material BPM Process Development Lifecycle Document that describes recommended approach to collaborative process modeling across business and IT tools ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) by Andrejus Baranovskis BPMN process editor problems in 11.1.1.6 by Mark Nelson BPM – Disable DBMS job to refresh B2B Materialized View by Mark Nelson For the complete kit please visit the BPM folder at our SOA Community Workspace (SOA Community membership required). For the complete presentation please visit our SOA Community Workspace (SOA Community membership required). Information is Oracle and Partner confidential! Back to top PLAQUES SOA & BPM SPECIALIZED We continue to offer you a nice SOA & BPM Specialization plaque with your logo to proof your success. If you are a SOA or BPM Specialized partner and would like to request the plaque please send Brigitte an e-mail with the following information: Partner Name Partner logo (preferred eps file) Partner Status gold or platinum Your shipping address Your Specialization: SOA or BPM We recommend to mount the plaque at your office reception in addition you can use the SOA Specialization logos at your website download Logo: Gold & Platinum or the BPM logos Gold & Platinum Back to top SOA & BPM AT VIRTUAL DEVELOPER DAY Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staffOracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications.Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect - this event has something for everyone. Don’t miss this opportunity.Tuesday, July 10, 2012. 9:00 a.m. PT -1:00 p.m. PT 11:00 a.m. CT - 3:00 p.m. CT 12:00 p.m. ET - 4:00 p.m. ET 1:00 p.m. BRT - 5:00 p.m. BRT Register online now! for this FREE event. Agenda: 09:00 am Opening 09:30 am Keynote: Oracle Fusion Development Track1Introduction to Fusion Development Track2What's New in Fusion Development Track3Fusion Development in the Enterprise 10:00 am Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 am Rich Web UI made simple - an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration *Hands On Lab – WebCenter and ADF Lab w/ JDeveloper - Lab materials will be provided ahead of the event to give you ample time to work through the lab and increase the productivity of the live chat sessions the day of the event. Sessions abstractsRegister online now! for this FREE event Read more on Community Events and post your comment here. Back to top NEWS FROM OUR PARTNERS AND COMMUNITY Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity JDeveloper & ADF?Troubleshooting BPMN process editor problems in 11.1.1.6http://dlvr.it/1p0FfS SOA Community?SOA & BPM @ Virtual Developer Day: Oracle Fusion Development - July 10th 2012https://soacommunity.wordpress.com/2012/07/02/soa-bpm-virtual-developer-day- oracle-fusion-developmentjuly-10th-2012/#soacommunity #soa #bom #education orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove.http://ow.ly/1kYqES SOA CommunitySOA Community Newsletter June 2012http://wp.me/p10C8u-qw SOA CommunityBPMN process editor problems in 11.1.1.6 by Mark Nelsonhttp://redstack.wordpress.com/2012/06/27/ bpmn-process-editor-problems-in-11-1-1-6 #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization)http://fb.me/1coX4r1X1 SOA CommunitySOA Learning Library provides a comprehensive curriculum for the SOA and BPM product suites https://soacommunity.wordpress.com/2012/06/27/soa-learning-library #soacommunity #soa #bpm OTNArchBeat ?A Universal JMX Client for Weblogic - Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koserhttp://pub.vitrue.com/mQVZ OTNArchBeat ?BPM - Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0Oracle SOA ?Learn how Choice Hotels Implements Innovative Google Maps Solution with #OracleSOA http://bit.ly/MTwIJ3 SOA Communitytop Tweets SOA Partner Community - June 2012 Send your tweets @soacommunity #soacommunity https://soacommunity.wordpress.com/2012/06/25/top-tweets-soa-partner-community-june-2012 Torsten Winterberg#OPITZ is pushing Oracle commitment to the next level: New Specializations done: ADF, BPM, WLS, Exadatahttp://bit.ly/KX1WVS ServiceTechSymposium ?Only 8 more days left until Super Early Bird Registration Discount expires! http://www.servicetechsymposium.com OracleBlogsSOA Management in 3 minutes - Video explainerhttp://ow.ly/1kN5pn SOA Community ?SOA, Cloud & Service Technology Symposium 2012 London - Enter Promo Code: Djmxz370https://soacommunity.wordpress.com/2012/06/22/soa-cloud-service-technology-symposium-2012-london #soasymposium #soacommunity #soa Heidi BuelowGreat course! w David Read RT @soacommunity: product management ADF for BPM training 5 seats left https://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity SOA Community ?product management ADF for BPM training 5 seats lefthttps://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity OTNArchBeat ?Oacle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broinhttp://pub.vitrue.com/UEiF OTNArchBeat ?SOA, Cloud & Service Technology Symposium 2012London - Special Oracle Discounthttp://pub.vitrue.com/8E0J SOA CommunityBecome a facebook fan of soacommunity http://www.facebook.com/soacommunity #soacommunity SOA Community ?SOA Suite HealthCare Integration Architecture https://blogs.oracle.com/SOAForHealthcare/entry/soa_suite_healthcare_integration_architecture #soacommunity #soa Andrejus Baranovskis ?Running Pre-built Virtual Machine for SOA Suite and BPM Suite 11g PS5 on Mac OS X Snow Leopard (10.6http://fb.me/vB8nO0Vg OracleBlogsPrinciples of Service-Oriented Architecture by Douwe P. van den Bos http://ow.ly/1kIcOP OTNArchBeatOracle Public Cloud Architecture | @TylerJewell http://ow.ly/bHAcL The SOA Network ?Business Process Management, Service-Oriented Architecture, and Web 2.0: Business Transformation or.http://bit.ly/LBgREL #ITNews #SOA OracleBlogs ?Oracle SOA Foundation Practitioner Certificationhttp://ow.ly/1kGYYg Frank Nimphius ?Learn Advanced ADF. ORACLE Fusion Middleware Summer Camps in Lisbon - July 9th - 13thhttp://bit.ly/KGCl3i SOA CommunityTransform Your Application Integration with Best Practices from Oracle Customershttps://blogs.oracle.com/SOA/entry/transform_your_application_integration_with #soacommunity #soa #bpm Simone GeibWhat you always wanted to know about #oraclesoa diagnostics: Shawn Bailey, Overview of SOA Diagnostics in 11.1.1.6,http://ow.ly/bxK0M Oracle SOA ?Save the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to #oraclesoa http://bit.ly/LsNDGl OTNArchBeat ?New VirtualBox images for Oracle SOA Suite & Oracle BPM Suite 11.1.1.6.0http://ow.ly/bwDAl OracleBlogs ?Process development lifecycle in Oracle BPM 11g http://ow.ly/1ktesY Daniel AmadeiNew post: Oracle BPEL 11g Message Delivery & Recovery.http://amadei.com.br/blog/index.php /oracle-bpel-11g-message-delivery SOA Community ?Sending out the June edition of the #soacommunity newsletter - read it or become a member http://www.oracle.com/goto/emea/soa!#soa #bpm Arun Pareek ?For the past six months Ahmed Aboulnaga and me have been working on Oracle SOA Suite 11g Administrator's Handbook.http://lnkd.in/CAvpUQ SOA CommunitySun shine all day no clouds - solar eclipse is over... #sunshine #cloud http://www.infoq.com/presentations/Swarm-Computing Michel SchildmeijerWatch my blog Oracle Service Bus 11g: listing projects and services with WLST - part 1 http://lnkd.in/B7f3GQ @TITAN_GS @wlscommunity OTNArchBeatBook Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Rahejahttp://ow.ly/bn2cc OTNArchBeat ?Driving from Business Architecture to Business Process Services | @vghariharan http://ow.ly/bn5UB OTNArchBeat ?SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 - Part II | Dawit Lessanu http://ow.ly/bn6sX Simone Geib ?Contact me directly for ideas how to improvehttp://bit.ly/advancedsoasuite and additional posts, presentations, white papers, ... #soasuite Simone Geib ?#soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite OracleBlogs ?June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA ServiceTechSymposium ?New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOeDebra Lilley ?looks good - real proof people are using the apps ! RT @fteter: Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps demed ?rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA CommunityMiddleware Oracle Excellence Awards 2012-HAPPY NEW YEAR! https://soacommunity.wordpress.com/2012/05/31/middleware-oracle-excellence-awards-2012happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle SOA CommunityHappy New Year #soacommunity thanks for the business! Time for a drink http://pic.twitter.com/zkK08KWB OTNArchBeat ?Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q SOA Communitytop Tweets SOA Partner Community &ndash; May 2012 http://wp.me/p10C8u-pP ServiceTechSymposiumNew session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com/agenda2012.php #elastic_soa_in_the_cloud orclateamsoa ?A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11Ghttp://ow.ly/1k2cnl ServiceTechSymposium ?New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Linkhttp://www.servicetechsymposium.com/agenda2012.php#soa_governance_at_edp SOA Community ?VirtualBox image SOA Suite & BPM Suite 11.1.1.6.0&ndash;Your feedback?http://wp.me/p10C8u-qh Oracle MiddlewareSave the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to#oraclesoa http://bit.ly/LU1y5N OTNArchBeat ?Goodbye, Silos. Hello SOA. | @stephanieoverbyhttp://pub.vitrue.com/NJJO SOA CommunityBPM Standard Edition - to start your BPM project http://wp.me/p10C8u-qj Please feel free to send us your news! And add your blog to our SOA blog wiki. Back to top OVERVIEW OF SOA DIAGNOSTICS IN 11.1.1.6 What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections.In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. read the full blog post here. Read more on Oracle and post your comment here. Back to top BUSINESS DRIVEN DEVELOPMENT (BDD) DEMO NOW AVAILABLE! For access to the Oracle demo systems please visit OPN and talk to your Partner Expert DSS is pleased to announce the availability of the demo “Business Driven Development“. This innovative demonstration uses a case-study approach to show business users how they can easily streamline their Business Processes - delivering greater efficiency, agility, visibility and collaboration with Oracle BPM and WebCenter. The BDD demonstration uses a case study-based approach to highlight a business problem at a fictional company, Avitek Corporation, and uses Oracle BPM and Oracle WebCenter to solve the business problem. This holistic approach has specifically been used to appeal to a non-technical business analyst user. This demo is NOT focused on product features, but aims to guide users through a complete BPM lifecycle. The scenario is based on improving a simple order process (scenario details are in the demo script). Avitek Corporation is sufferinng from a manual email-driven ordering process. Sales reps don’t know where the customer orders are stuck (no visibility) and finance users are unable to manually approve every order (no automation). There are several areas where this process can be improved with Business Process Management technology. This demo shows how improving following areas will ignificantly help resolve the business problems Avitek Corporation is facing. Areas for improvement include: Utilizing BPM for process management, rather than an unregulated, email-based process. Utilizing automated services, rather than requiring a human to key into a system. For example, Finance checking the customer’s credit rating is something that could be automated. Centralizing business rules that can be integrated into a business process, rather than requiring a human to process them. For example, Finance must determine when orders can be automatically approved. Provide insight and visibility into the process. For example, Sales Rep needs to know the status of their customer’s orders. The BDD Demo uses the following products. Oracle BPM Suite 11g PS4FP Oracle WebCenter 11g PS4FP (for Process Spaces) Oracle Business Activity Monitoring 11g Oracle Database 11g Back to top SOA LIFECYCLE MANAGEMENT For access to the Oracle demo systems please visit OPN and talk to your Partner Expert We are pleased to announce the availability of the SOA Management demo that showcases some of the key provisioning and lifecycle management capabilities of SOA Management Pack Enterprise Edition (EE). This demo specifically focuses on some of the lifecycle management solutions for Oracle SOA Suite and Oracle Service Bus (OSB). Demo Highlights The demo showcases the following capabilities. Provisioning of SOA Composites Provisioning of OSB Projects Provision SOA and OSB artifacts in a future maintenance window Back to top ORACLE FUSION APPLICATIONS DESIGN PATTERNS The Oracle Fusion Applications user experience design patterns are published! These new, reusable usability solutions and best-practices, which will join the Oracle dashboard patterns and guidelines that are already available online, are used by Oracle to artfully bring to life a new standard in the user experience, or UX, of enterprise applications. Now, the Oracle applications development community can benefit from the science behind the Oracle Fusion Applications user experience, too. These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight when: tailoring an Oracle Fusion application, creating coexistence solutions that existing users will be delighted with, thus enabling graceful user transitions to Oracle Fusion Applications down the road, or designing exciting, new, highly usable applications in the cloud or on-premise. Based on the Oracle Application Development Framework (ADF) components, the Oracle Fusion Applications patterns and guidelines are proven with real users and in the Applications UX usability labs, so you can get right to work coding productivity-enhancing designs that provide an advantage for your entire business. What’s the best way to get started? We’ve made that easy, too. The Design Filter Tool (DeFT) selects the best pattern for your user type and task. Simply adapt your selection for your own task flow and content, and you’re on your way to a really great applications user experience. More Oracle applications design patterns and training are coming your way in the future. To provide feedback on the sets that are currently available, let me know in the comments! Read more on Fusionapps and post your comment here. Back to top UPDATED ORACLE MATERIAL Integrated SOA Gateway Documentation - Implementation Guide | Developer’s Guide Webcast Series: Oracle’s SOA and Oracle Business Process Management Solutions (Choice Hotels, Eaton, Farmers Insurance) BAM design pointers By Kavitha Srinivasan Seeking Oracle Fusion Middleware Go Live StoriesOracle Fusion Middleware product management is looking for recent go live stories to share with the Oracle sales team, sales consulting, product management and other internal groups. Customer contact details may remain anonymous. Your successful implementation will be featured in a quarterly report. The chance to present on an internal webcast is also available. Contact Maria Forney ([email protected]) if you have a noteworthy implementation success story. This is a good opportunity for partners interested in showcasing Oracle Fusion Middleware implementations, and gaining more exposure within Oracle. Performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources Back to top HAVE YOU MISSED OUR LAST SOA PARTNER COMMUNITY WEBCASTS? UPK Webcast Business Driven Application Management & BPM11g & Application Grid & GoldenGate & Fusion Middleware Pricing & OC4J to WebLogic & Next Generation SOA & Fusion Middleware in Utility & Fusion Middleware in Communications & Fusion Middleware in Public Services & Fusion Middleware in Financial Services Please check your local OPN trainings calendar for additional training dates and locations. Back to top SOA PARTNER COMMUNITY CALENDAR On-Demand Trainings Event Name Language Type SOA Virtual Developers Day English Tech In-Class Trainings Date Event name Location / Country Contact person Type 09-13.07.2012 BPM Suite 11g advanced training by David Read Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 ADF 11g advanced training by Grant Ronald and Frank Nimphius Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Lisbon, Portugal Jürgen Kress Tech 10.07.2012 Fusion Middleware Virtual Developer Day Online OTN Tech 10- 12.07.2012 WebLogic 12c training by Cosmin Tudor Lisbon, Portugal Jürgen Kress Tech 16-18.07.2012 SOA Suite 11g advanced training by Niall Commiskey Munich, Germany Jürgen Kress Tech 16-18.07.2012 ADF for BPM Suite 11g advanced training by David Read Munich, Germany Jürgen Kress Tech 16-18.07.2012 WebCenter Sites 11g advanced training by Product Management Munich, Germany Jürgen Kress Tech 17-20.07.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 23-26.07.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 29-31.08.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 02-05.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 28-30.11.2012 Oracle AIA 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 11-14.12.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 20-22.2.2013 Oracle AIA 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 14-17.1.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.3.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech Please check your local OPN Training Calendar for additional training and locations here. Back to top SOASCHOOL.COM - SOA CERTIFIED PROFESSIONAL(SOACP) PROGRAM The SOASchool.com - SOA Certified Professional (SOACP) program is dedicated to excellence in the field of SOA and service-oriented computing. Through a series of seasoned course modules and exams, IT professionals have the opportunity to obtain a number of different certifications to recognize their accomplishment of gaining "project ready" SOA proficiency. This comprehensive and strictly vendor-neutral program was developed in cooperation with best-selling SOA author Thomas Erl and several major SOA organizations and academic institutions. Through the involvement of the SOA Education Committee, course contents and certification requirements are constantly reviewed and revised to stay current with developments in the service-oriented computing industry. The program is currently comprised of 12 course modules and 5 certifications and is expanding to 18 course modules and 8 certifications throughout 2009. For more information, visit www.soaschool.com and www.soacp.com. Blog Twitter LinkedIn Mix Forum Wiki Back to top YOUR CONTENT ON THE NEWSLETTER AND ON THE SOA COMMUNITY PORTAL Publishing Your StoriesWe would like to invite our partners to publish information in the newsletter or on our SOA Community portal. Especially we are looking for your real life experience with our SOA technology. Please send your documents to Jürgen Kress. We look forward to getting your suggestions! Back to top SOA DISCUSSION FORUM BECOMES INTERACTIVE AT THE SOA COMMUNITY! Do you want to chat to experts, including partners and Oracle SOA Product Development? Do you want to get the latest information about our SOA solutions and events?Attend our private online SOA Discussion Forum at OTN. Please send your OTN forums user name to Brigitte Felisaz. You must be a registered user to access the SOA Discussion Forum. Back to top INVITE YOUR COLLEAGUES TO JOIN THE SOA COMMUNITY Please feel free to invite your colleagues to join the SOA Community and to participate in the SOA Assessment tests. For registration please login the Oracle PartnerNetwork and go to: www.oracle.com/goto/emea/soa For any questions on the above or concerning SOA and Oracle in general please contact the Oracle EMEA Alliances & Channels SOA Team. Best regardsOracle EMEA SOA TeamJürgen Kress Jürgen KressSOA Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

    Read the article

  • SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

    - by pinaldave
    TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

    - by pinaldave
    TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • You Might Be a DBA

    - by BuckWoody
    With all apologies to Jeff Foxworthy, I was up late Friday night on a holiday weekend (which translated into T-SQL becomes “Maintenance Window”) and I got bored in between the two or three minutes I had between clicks. So I started a “Twitter” meme – and it just took off. I haven’t cleaned these up much, but here, in author order as of Saturday the 29th of May is the list “You might be a DBA” from around the Twitterverse: buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA  buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA  buckwoody You have at least one set of scripts you won't share #youmightbeaDBA  buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA  buckwoody You have children older than the rest of your team #youmightbeaDBA  buckwoody You and the Oracle DBA would kill each other, but you'll happily fight off a developer together first #youmightbeaDBA  buckwoody You've threatened to quit if they give anyone the sa password on production #youmightbeaDBA  buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA  buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA  buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA  buckwoody You have at least one set of scripts you won't share #youmightbeaDBA  buckwoody You refer to co-workers as "carbon-units" #youmightbeaDBA  buckwoody Being paranoid is on your resume at the top #youmightbeaDBA  buckwoody Everyone comes to your cube to find the MSDN DVD's #youmightbeaDBA  buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA  buckwoody You've worn down developers to get your way by explaining normalization levels #youmightbeaDBA  buckwoody You refer to clothes as "Data Abstractions" #youmightbeaDBA  buckwoody Users pester you to be able to put data in a database, then they pester you to take it out and put it in Excel #youmightbeaDBA  buckwoody Others try to de-duplicate data, you try to copy it to more than three locations #youmightbeaDBA  buckwoody You have at least one DLT tape in the trunk of your car #youmightbeaDBA  buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA  buckwoody Your spouse knows what "ETL" means #youmightbeaDBA  buckwoody You've referred to yourself as the "Data Janitor" #youmightbeaDBA  buckwoody You don't have positive connotations of the word "upgrade" #youmightbeaDBA  buckwoody You get your coffee before you check your servers, because you know you won't get any if you don't #youmightbeaDBA  buckwoody You always come to work through the back door so no one hijacks you on the way to your cube #youmightbeaDBA  buckwoody You check your server logs before you check your e-mail in the morning so you can reply "Yeah, I already fixed that." #youmightbeaDBA  buckwoody You have more conference badges than clean socks #youmightbeaDBA  buckwoody Your coffee mug says "It depends" #youmightbeaDBA  buckwoody You can convince a boss that you need 16GB of RAM in your laptop #youmightbeaDBA  buckwoody You've used ebay to find production equipment #youmightbeaDBA  buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA  buckwoody You know when your company is acquiring another even before the CFO #youmightbeaDBA  buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA  buckwoody You call aspirin "work vitamins" #youmightbeaDBA  buckwoody You get the same amount of sleep even after you have a child #youmightbeaDBA  buckwoody You obsess about performance metrics from over one year ago #youmightbeaDBA  buckwoody The first thing you buy after the database software is aftermarket tools to manage the database software #youmightbeaDBA  buckwoody You've tried to convince someone else to become a DBA #youmightbeaDBA  buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA  buckwoody You only know other DBA's by their Tweet Handle #youmightbeaDBA  buckwoody You've explained the difference between 32 and 64-bit to more than one manager in terms they can understand, using puppets #youmightbeaDBA  buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA  buckwoody You've driven to the Datacenter to install SQL Server because "you don't trust those NOC admins" #youmightbeaDBA  buckwoody You pay more for faster Internet connections than cable at home so you don't have to drive in #youmightbeaDBA  buckwoody You call texting a "queuing system" #youmightbeaDBA  buckwoody You know that if someone can read Perl, they manage an Oracle system #youmightbeaDBA  buckwoody You have an e-mail rule for backup notifications #youmightbeaDBA  buckwoody Your food pyramid includes coffee, salt and fat #youmightbeaDBA  buckwoody You wish everything had a graphical query plan #youmightbeaDBA  buckwoody You refactor your e-mails #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA  buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody You've written blog posts on technology you've never actually implemented in production #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody @MidnightDBA Click the #youmightbeaDBA tag. I've had WAY too much coffee today.  buckwoody There is no other position that is 1-deep except you and the CEO #youmightbeaDBA  buckwoody When you watch "The Office" you call it "OJT" #youmightbeaDBA  buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA  buckwoody Your blog would make a "best practices" or "worst practices" book #youmightbeaDBA  buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA  buckwoody The first thing you install on your netbook is SSMS #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody Your watch is set to UTC because it's just easier #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA  buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA  buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody * == bad #youmightbeaDBA  buckwoody * == bad #youmightbeaDBA  buckwoody There are just as many females in your technical field as males #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA  buckwoody You refer to time as a "Clustered Index" #youmightbeaDBA  buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA  buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA  buckwoody You think a millisecond is a really long time #youmightbeaDBA  buckwoody You're sitting and typing #youmightbeaDBA when you could be outside #youmightbeaDBA  buckwoody You can't wait for a technical conference so you can wear a kilt - and you're not Scottish #youmightbeaDBA  buckwoody You know that "DBA" stands for "Default Blame Acceptor" #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You know what "the truth, thole truth and nothing but the truth, so help me Codd" means #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You can't talk fast enough to get a concept out of your head so you tweet it instead #youmightbeaDBA  buckwoody You cry when someone doesn't use a WHERE clause #youmightbeaDBA  buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA  buckwoody You think "Set theory" is not an verb but a noun #youmightbeaDBA  buckwoody You try to convince random strangers to vote on your Connect item #youmightbeaDBA  buckwoody You think 3 hours of contiguous sleep is a good thing #youmightbeaDBA or #youmightbeamother  buckwoody You don't like Oracle, and not just because of what she did to Neo #youmightbeaDBA  buckwoody You know when to say "sequel" and "s-q-l" #youmightbeaDBA  buckwoody You know where the data is #youmightbeaDBA  buckwoody You refer to your children as "Fully Redundant Mirrors" #youmightbeaDBA  buckwoody Holiday == "Maintenance Window" #youmightbeaDBA  buckwoody Your laptop is more powerful than the servers in most companies - including your own #youmightbeaDBA  buckwoody You capitalize SELECTed words #youmightbeaDBA  buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA  buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA  buckwoody You cringe in public when the word "upgrade" is used in a sentence #youmightbeaDBA  buckwoody Holiday == "Maintenance Window" #youmightbeaDBA  buckwoody All Data Is MetaData means something to you #youmightbeaDBA  buckwoody You've never seen the driveway to your house in the daylight #youmightbeaDBA  buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA  buckwoody Most of your bloodstream is composed of caffeine #youmightbeaDBA  buckwoody Your task list is labeled "CRUD Matrix" #youmightbeaDBA  buckwoody You call your wife/husband a "Linked Server" #youmightbeaDBA  anonythemouse When someone tells you they are going to take a dump and you wonder of which database then #youmightbeaDBA  anonythemouse When it's 11pm on a holiday weekend and you are working #youmightbeaDBA  anonythemouse When you sit down at a table and look for it's primary key #youmightbeaDBA  anonythemouse When getting milk from the fridge you check the expiry date is > getdate() #youmightbeaDBA  blakmk when you wake up dreaming about sql #youmightbeaDBA  CharlesGarver You think a @buckwoody bobblehead would be a cool thing to have on the dashboard of your car #youmightbeaDBA  CharlesGarver Your friends don't understand why you think there's a difference between single and double quotes #youmightbeaDBA  CharlesGarver Even the newest employees know your name from all the downtime notices you've sent out #youmightbeaDBA  CharlesGarver You sometimes feel anxious and think "I should test restoring those backups" and then the feeling passes #youmightbeadba  CharlesGarver You know what a co-worker means when they ask "how is your squirrel server?" #youmightbeadba  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver You're willing to move someone's job up in priority for a box of #voodoodonuts #youmightbeaDBA  CharlesGarver Each person in your company seems to think you work for THEM #youmightbeaDBA  CharlesGarver You have a Love/Hate relationship going on with #Microsoft #youmightbeaDBA  CharlesGarver People ask you to troubleshoot their Access program #youmightbeaDBA  CharlesGarver The first words you hear in the morning are 'your voicemail box is full' #youmightbeaDBA  CharlesGarver The thought of disrupting 500 people's work so you can do something doesn't phase you #youmightbeaDBA  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver Your home computer is backed up in 3 different places #youmightbeaDBA  CharlesGarver Your wardrobe for work includes pajamas #youmightbeaDBA  CharlesGarver Someone tells you to look in the INDEX and you look puzzled before finally going to the back of the book. #youmightbeaDBA  chuckboycejr If you have ever set up a SQLAgent job to email your mobile phone to serve as an alarm clock #youmightbeaDBA  chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA  chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA  chuckboycejr If you'd wrestle a SysAdmin to the ground to implement #DPA best practices as per @aspiringgeek #youmightbeaDBA  databaseguy I need to be up in 7 hours, so I'm off to bed! I'll have to read the rest of @buckwoody's #youmightbeaDBA posts in the AM. (g'night Buck!)  databaseguy When people ask you about your house, the first thing you describe is the network. #youmightbeaDBA  databaseguy The last thing you say at the office each day is, "is anybody else here? I'm shutting off the lights!" #youmightbeaDBA  databaseguy Your blood pressure rises when you read application specs drafted by marketing. #youmightbeaDBA  databaseguy A good day at work is one when nobody pays you no mind. #youmightbeaDBA  databaseguy You care about latches and wait states. #youmightbeaDBA  databaseguy You have worked over 200 hours on a performance tuning project that required no application changes at all. #youmightbeaDBA  databaseguy The late-night security guard knows the names of your spouse and kids. #youmightbeaDBA  databaseguy You have had vigorous debates about whether it should be pronounced "sequel" or "ess-queue-ell". #youmightbeaDBA  databaseguy You have VPN and RDP software installed on your phone ... just in case. #youmightbeaDBA  databaseguy You have edited a data file by hand, just to see what would happen. #youmightbeaDBA  databaseguy You decorate your office walls with database catalog posters. #youmightbeaDBA  databaseguy You've built programs that access data just to keep other developers from asking you to run queries all the time. #youmightbeaDBA  databaseguy When you watch movies like The Matrix, you find yourself calculating the fasibility of storing all that data. #youmightbeaDBA  databaseguy You have tried to convince someone to spend money on an SSD storage array. #youmightbeaDBA  databaseguy When CPU is spiked on a server, you want to gather forensic evidence. #youmightbeaDBA  databaseguy You have to remind developers not to push code to production without checking if the database is ready. #youmightbeaDBA  databaseguy Nobody cares what you wear to work, as long as the thing keeps running. #youmightbeaDBA  databaseguy Telepathy is a job requirement when working with app dev teams. #youmightbeaDBA  databaseguy You read database statistics for the educational value. #youmightbeaDBA  databaseguy And your boss freely admits this to anyone within earshot. #youmightbeaDBA  databaseguy Your boss cannot explain or understand what you do. #youmightbeaDBA  databaseguy You envision ERDs when you see a GUI. #youmightbeaDBA  databaseguy You say things like "applications come and go, but data lasts forever." #youmightbeaDBA  databaseguy You have memorized the names of several of the AdventureWorks employees. #youmightbeaDBA  databaseguy You know what MAXDOP setting you can get away with for a big query based on current server load. #youmightbeaDBA  databaseguy And you immediately recognize the recursion in my last tweet. #youmightbeaDBA  databaseguy You find 50 simultaneous tweets from @buckwoody about #youmightbeaDBA :O)  DBAishness You have "funny stories" about the times your developers accidentally deleted the T-log in their test environment. #youmightbeaDBA  DBAishness Planning to slice and dice your MDW data with PowerPivot makes you giggle like a schoolgirl. #youmightbeaDBA  donalddotfarmer You think @buckwoody lives in the "real world." #youmightbeaDBA  jamach09 @buckwoody #youmightbeaDBA Why go outside when you can sit in the nice cool server room?  jamach09 If you refer to procreation as "Replication", #youmightbeaDBA.  jamach09 If you think ORM is a four-letter word, #youmightbeaDBA  JamesMarsh If you have ever preached the value of Source Code Control, #YouMightBeADBA  jethrocarr @venzann You store your shopping list in a ACID compliant DB #youmightbeaDBA  joe_positive @buckwoody thought it stood for "Don't Bother Asking" #youmightbeaDBA  joe_positive when you check your IT Events Calendar before making weekend plans #youmightbeaDBA  LadyRuna You cringe whenever someone calls Excel a database #youmightbeaDBA  LadyRuna When the waiter says he'll be your server today, you ask how many terabytes he is #youmightbeaDBA  LadyRuna you always call the asterisk a "Star" #youmightbeaDBA  LadyRuna You walk into a server room, say "Nice RACK!" and everyone there knows you're talking about server rack... #youmightbeaDBA  LadyRuna You receive more messages from servers than from friends #youmightbeaDBA  LadyRuna hmmm... #youmightbeaDBA if your recipe for gumbo is "SELECT * FROM Refrigerator"  markjholmes @SQLSoldier Heh. #youmightbeaDBA if you correct other DBAs' spelling of @PaulRandal  markjholmes #youmightbeaDBA if you actually test RAID5 vs RAID10 on your SAN because when it comes to configuration, "it depends."  markjholmes #youmightbeaDBA if you have at least 3 definitions of the word "cluster"  MarlonRibunal 3 Words: @BrentO, snicker, & Access #youmightbeaDBA  MarlonRibunal @onpnt @mikeSQL my appeal was a couple of mins late. Enjoying #youmightbeaDBA  MarlonRibunal @mikeSQL @onpnt pls, don't mention bacon #youmightbeaDBA  merv @buckwoody You HATE 3-way joins #youmightbeaDBA  MidnightDBA If you're up at midnight Tweeting about SQL #youmightbeaDBA  MidnightDBA @buckwoody I'd noticed that. :) #youmightbeaDBA  mikeSQL when people talk about "their type" you're thinking varchar, bigint, binary, etc #youmightbeadba  mikeSQL people ask you to go to lunch , but you can't go because you're attending #SQLlunch #youmightbeadba  mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba  mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba  mrdenny If you think that @buckwoody's demo using PowerPivot to analyze index usage data from DMVs is awesome then #youmightbeaDBA  mrdenny You wish @PaulRandal still worked at Microsoft so that they would make a bobble head of him #youmightbeadba  mrdenny When it's 11pm on a holiday weekend, and your posting stupid jokes on Twitter then #youmightbeadba  mrdenny If you go out with friends and wonder why no one's wearing a kilt then #YouMightBeADBA  mrdenny You can't do basic math, but you know off the top of your head how many CALs $14,412 can buy you. #YoumightbeaDBA  mrdenny If you've ever setup a SQL Job to email you to get you out of a regularly scheduled meeting #YouMightBeADBA.  mrdenny You throw up in your mouth a little when ever you here the word "Access". Even if it doesn't relate to a MS product. #YouMightBeADBA  msdtjones You spend more time listening to @buckwoody than your wife #youmightbeaDBA  NFDotCom You perform "hail deltas" on a regular basis. #YouMightBeADBA  NoelMcKinney If you tell your wife you want to go to Columbus Ohio for your wedding anniversary so you can attend #sqlsat42 then #youmightbeaDBA  NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA  NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA  NoelMcKinney Someone asks you to throw another log on the fire and you tell them not to worry about it because Autogrowth is turned on #youmightbeaDBA  Nuurdygirl Even if you have a girlfriend...its possible #youmightbeadba. Yeah-i said its possible!  Nuurdygirl When your girlfriend has to lean around the laptop to kiss you goodnight #youmightbeadba  Old_Man_Fish If you worry about how big your package is and how long it takes to finish #youmightbeaDBA  Old_Man_Fish If you no longer wonder if someone is in trouble or died if you are getting calls at 2AM #youmightbeaDBA  Old_Man_Fish If, when you hear the word ACCESS with no connotation you blood pressure jumps 50 points, #youmightbeaDBA  onpnt When you hear the word inject you immediately get concerned if your databases are OK #youmightbeaDBA  onpnt Your servers haven't been rebooted in a year #youmightbeaDBA  onpnt You know why it's funny when @PaulRandal has the word, "Sheep" in a tweet #youmightbeaDBA  onpnt You have read BOL without actually having a problem to figure out #youmightbeaDBA  onpnt You can type "SELECT columns FROM tables" without typos but tipen ni Banglish ares a messis #youmightbeaDBA  onpnt DR strategies doesn't include the word, RAID in them #youmightbeaDBA  onpnt you can move a SQL Server instance to a new server without the users ever knowing #youmightbeaDBA  onpnt You have made an SSIS package that is more than one step #youmightbeaDBA  onpnt You have the balls to say no to your boss when they ask for the sa password #youmightbeaDBA  onpnt you google to trouble shoot a problem and end up at your own blog (and it fixes it) #youmightbeaDBA  onpnt You talk your wife into moving the family vacation a week earlier so you can attend the areas local SSUG meeting #youmightbeaDBA  onpnt you can explain to a nontechnical person what a deadlock is #youmightbeaDBA  onpnt You hope a girl asks you what your collation is #youmightbeaDBA  onpnt you make jokes that include the words shrink, truncate and 1205. And you are the only one that laughs at them #youmightbeaDBA  onpnt You rate your ability to stay awake to work longer on blogs, twitter, forums and your day to day job with the 5 9's goal #youmightbeaDBA  onpnt you have major surgery and beg the doctor to release you back to work 5 days later because you miss your servers #youmightbeaDBA #TrueStory  onpnt You do have backups and you know how to use them #youmightbeaDBA  onpnt It's the network #youmightbeaDBA  onpnt When the developers get to work your mood changes rapidly #youmightbeaDBA  onpnt When someone says, "PASS", you first think of karaoke #youmightbeaDBA  onpnt Recruiters try to get you to call them *just* because they think you'll give them @BrentO contact info #youmightbeaDBA  onpnt You chuckle every time you go to grab the "CLR" Calcium, Lime and Rust Remover to clean something #youmightbeaDBA  onpnt @MarlonRibunal @mikeSQL Sorry man, it was already in motion ;-) #youmightbeaDBA  onpnt When you have an "I love bacon" sticker on your laptop. #youmightbeaDBA http://twitpic.com/1ry671  onpnt You sing SELECT statements in the shower #youmightbeaDBA  onpnt When you see a chicken it doesn't remind you of food. It reminds you of a guy named Jorge #youmightbeaDBA  onpnt At time, SQL is your mistress #youmightbeaDBA  onpnt Your wife wonders if SQL is the code name of your mistress at times #youmightbeaDBA  onpnt it's Friday and you are on twitter thinking really hard about what would be funny for hash tag #youmightbeaDBA  onpnt You organize your wife's "decorative"pillows on the bed in a B-Tree structure #youmightbeaDBA  PaulWhiteNZ If you: SELECT TOP (1) milk FROM fridge WHERE use_by_date >= GET_DATE() ORDER BY use_by_date ASC #YouMightBeaDBA  RonDBA #youmightbeaDBA if you read @buckwoody's and @BrentO's blogs.  ryaneastabrook @buckwoody omg, you have to stand up a website with these on them, they are awesome #youmightbeaDBA  soulvy @StrateSQL @LadyRuna Or a "Splat" #youmightbeaDBA  speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA  speedracer You retweet @buckwoody on a Friday night #youmightbeaDBA  speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA  speedracer Developers make you twitch #youmightbeaDBA  sqlagentman You know what X/1024*8 is. #YouMightBeADBA  SqlAsylum Your still in the office at 5:00 on memorial day weekend. #youmightbeadba :)  SQLBob Whenever someone you know gets pregnant you bring up INNER JOINs or SQL Injection attacks... #youmightbeaDBA  SQLChicken You know one or more SQL folks in the community with an animal in their username #youmightbeaDBA  SQLChicken You've used one or more car analogies to explain how a database works #youmightbeaDBA  SQLChicken “@sqljoe: #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you” lmao nice!  SQLChicken When talking about SSIS your discussions break down into various jokes about packages #youmightbeaDBA  SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA  SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA  SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  SQLCraftsman You really own a "Stick of Much Developer Whacking" #YouMightBeADBA  SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA  SQLCraftsman Default Blame Acceptor #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  SQLCraftsman Default Blame Acceptor #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  sqljoe #youmightbeaDBA if you wished your wife knew T-sql. USE ShoppingList SELECT NecessaryItems from Supermarket WHERE Category<> ("junk food")  sqljoe #youmightbeaDBA if the first thing you kiss when you wake up is your mobile for not waking you up in the middle of the night  sqljoe #youmightbeaDBA if your wife has a "Do Not Fly" family vacation list of her own including your laptop and mobile  sqljoe #youmightbeaDBA if you have researched for DBA Anonymous groups and attended a #SSUG willing to drop your database (vice)  sqljoe #youmightbeaDBA if your only maintenance windows are staff meetings  sqljoe #youmightbeaDBA if you think of yourself as "The One" in The Matrix "balancing the equation" from The Architect's (developers) poor coding  sqljoe #youmightbeaDBA if you think @PaulRandal should have played the Oracle in The Matrix  sqljoe #youmightbeaDBA if home CD & Movie collection is stored in secured containers,in logical order & naming convention,and with a backup copy  sqljoe #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you  sqljoe #youmightbeaDBA if you have tried to TiVo @MidnightDBA broadcasts  sqljoe #youmightbeaDBA if your #sql user group feels like #AA meetings  sqljoe #youmightbeaDBA if you thought of bringing your #sql books to #sqlsaturday and #sqlpass for autographs  sqljoe #youmightbeaDBA if #sqlpass feels like the #oscars  sqljoe #youmightbeaDBA if you are proud of your small package  SQLLawman #youmightbeaDBA when you hear MDX and Acura is not first thought that comes to mind.  sqlrunner If your wife double checks that there isn't a SQLSat within 200 miles of your vacation destination #youmightbeaDBA  sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA  sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA  sqlrunner You treat the word 'access' as a verb, not a noun #youmightbeaDBA  sqlrunner If you are happy with sub-second performance #youmightbeaDBA  sqlrunner When you know the names of the NOC people AND their families #youmightbeadba  sqlrunner When you know the names of the NOC people AND their families #youmightbeadba  sqlrunner Your company set's up international phone coverage for your cruise #youmightbeaDBA  sqlsamson @buckwoody if your manager asks you for data and you respond with "there's a script for that" #youmightbeadba  sqlsamson @buckwoody If you receive more messages from your server then your spouse #youmightbeadba  SQLSoldier You've spent all night Valentines Day upgrading the SQL Servers and forgot to tell your wife you'd be working late. #youmightbeadba  SQLSoldier You're flattered when someone calls you a geek. #youmightbeadba  SQLSoldier @llangit @mrdenny it's 11pm on a holiday weekend, & your reading stupid jokes on Twitter then #youmightbeadba  SQLSoldier Your manager borrows lunch money from you because your salary is 30% higher than his. #youmightbeaDBA  SQLSoldier You think "intellisense" is a double negative because it's not intelligent nor makes sense. #youmightbeaDBA  SQLSoldier 75% of the emails you receive at home have the phrase "now following you on Twitter!" in the subject line. #youmightbeaDBA  SQLSoldier You petition Ken Burns to remake Office Space because it should have been 18 hours long. #youmightbeaDBA  SQLSoldier You select a candidate for a Jr DBA position because his resume said he's willing to get your coffee. #youmightbeaDBA  SQLSoldier Somebody misquotes @PaulRandall and you call him on your cell to verify. #youmightbeaDBA  SQLSoldier You wish the elevator in your building was slower because it's the last time you'll be left alone all day. #youmightbeaDBA  SQLSoldier The developers sacrifice small animals before giving you their code for review. #youmightbeaDBA  SQLSoldier Developers bring you coffee and a BLT when you review their code. #youmightbeaDBA #IWish  SQLSoldier You can get out of any family get-together by saying you have to work and nobody questions it. #youmightbeaDBA  SQLSoldier You've requested a HP Superdome for you "test" box. #youmightbeaDBA  SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA  SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier A dev. asks if you've heard about some great new feature in SQL and you show the 16 blog posts you wrote on it ... last year #youmightbeaDBA  SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA #TrueStory  SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA  SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA  SQLSoldier You use a cell phone service coverage map to plan your next vacation. #youmightbeaDBA  SQLSoldier You come in to work at 7 AM because it gives you at least 3 hours without any developers around. #youmightbeaDBA  SQLSoldier You figure out a way to make take your wife on a cruise and deduct it as a business expense. #youmightbeaDBA #sqlcruise  SQLSoldier You name your cat SQLDog because the name @SQLCat was already taken. #youmightbeaDBA  SQLSoldier You rate your blog posts based on the number of retweets you get. #youmightbeaDBA  SQLSoldier You disable random logins just to mess with people. #youmightbeaDBA  SQLSoldier You fall for the pickup line, "Hey baby, what's your collation?" #youmightbeaDBA  SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA  SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier Your think the 4 food groups are coffee, bacon, fast food, and Mountain Dew. #youmightbeaDBA  SQLSoldier You tell someone your job title and they ask "What?" You describe it and they ask "What?". So you say "computer geek". #youmightbeaDBA  SQLSoldier The #1 referrer to your blog is Twitter.com. #youmightbeaDBA  SQLSoldier Your idea of a good time on a Saturday involves free training. #youmightbeaDBA #sqlsat43  SQLSoldier You write a book that all of your co-workers have and none have read it. #youmightbeaDBA  SQLSoldier You write a book that sells a couple thousand copies and is heralded a best seller. #youmightbeaDBA  SQLSoldier No matter how sick you are, you go to work if it's time to pass the pager on to the next guy. #youmightbeaDBA #TrueStory  SQLSoldier You go out on the town, and strangers walk up to you and say, "Hey you're that SQL guy" #youmightbeaDBA #TrueStory  SQLSoldier Your wife asks you to fix something, and you request a downtime window. #youmightbeaDBA  SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA  SQLSoldier Your best pickup line, "Hey baby, what's your collation?" #youmightbeaDBA  SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA  SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA  SQLSoldier You list TSQL as your native language on the 2010 census. #youmightbeaDBA  SQLSoldier Starbucks' stock price drops every time you go on vacation. #youmightbeaDBA  SQLSoldier You're happy when the web master says that the website is down. #youmightbeaDBA  SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA  SQLSoldier You get mad when someone calls your car a "heap" because you've always considered it to be a "clustered index". #youmightbeaDBA  SQLSoldier Your blog has more hits than your company's website. #youmightbeaDBA  SQLSoldier You systematically remove the asterisk key from all keyboards in the company except yours. #youmightbeaDBA  SQLSoldier When asked if you recycle, you reply that you run sp_cycle_errorlog every night at midnight #youmightbeaDBA  SQLSoldier You wouldn't allow someone named @AdamMachanic to work on your car. #youmightbeaDBA  SQLSoldier You switch offices every 3 days to avoid developers #youmightbeaDBA  SQLSoldier PSS has your number on speed dial. #youmightbeaDBA  SQLSoldier You frown when you they tell Neo that he's going to the Oracle #youmightbeaDBA  swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA  swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA  Tarwn A pleasurable saturday means spending the day learning more about what you already do the rest of the week #youmightbeaDBA ...oh, wait...  thelostforum For great justice; all our base are belong to YOU !! #youmightbeadba  thelostforum @SQLSoldier: You need a witness to use a mirror #youmightbeaDBA ;)  TimCost you capitalize key words. always. everywhere. you can't help it, usually don't even notice. #youmightbeaDBA  Toshana Your the only one in your company not impressed with the developers new application. #youmightbeaDBA  venzann Coming soon from a (respected) book publisher - @buckwoody's #youmightbeaDBA  venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets...  venzann I love the #youmightbeaDBA tag. Found at least 6 new DBAs to follow..  venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets...  venzann You use #sqlhelp as a primary resource during troubleshooting #youmightbeaDBA  venzann You insist on stricter password security for your sql servers than you implement on your own laptop #youmightbeaDBA  WesBrownSQL @buckwoody you are up so late the only tweets you see are from @buckwoody #youmightbeaDBA  WesBrownSQL @SQLSoldier you are upgrading all your 2005 prod servers to 2008 R2 on a three day weekend... #youmightbeaDBA  zippy1981 #youmightbeaDBA if everytime you do something with #mongodb you think of the Vulcan proverb "only Nixon could go to China."  Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Slow NFS and GFS2 performance

    - by Tiago
    Recently I've designed and configured a 4 node cluster for a webapp that does lots of file handling. The cluster have been broken down into 2 main roles, webserver and storage. Each role is replicated to a second server using drbd in active/passive mode. The webserver does a NFS mount of the data directory of the storage server and the latter also has a webserver running to serve files to browser clients. In the storage servers I've created a GFS2 FS to hold the data which is wired to drbd. I've chose GFS2 mainly because the announced performance and also because the volume size which has to be pretty high. Since we entered production I've been facing two problems that I think are deeply connected. First of all, the NFS mount on the webservers keeps hanging for a minute or so and then resumes normal operations. By analyzing the logs I've found out that NFS stops answering for a while and outputs the following log lines: Oct 15 18:15:42 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:44 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:46 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:51 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:58 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK In this case, the hang lasted for 16 seconds but sometimes it takes 1 or 2 minutes to resume normal operations. My first guess was this was happening due to heavy load of the NFS mount and that by increasing RPCNFSDCOUNT to a higher value, this would become stable. I've increased it several times and apparently, after a while, the logs started appearing less times. The value is now on 32. After further investigating the issue, I've came across a different hang, despite the NFS messages still appear in the logs. Sometimes, the GFS2 FS simply hangs which causes both the NFS and the storage webserver to serve files. Both stay hang for a while and then they resume normal operations. This hangs leaves no trace on client side (also leaves no NFS ... not responding messages) and, on the storage side, the log system appears to be empty, even though the rsyslogd is running. The nodes connect themselves through a 10Gbps non-dedicated connection but I don't think this is an issue because the GFS2 hang is confirmed but connecting directly to the active storage server. I've been trying to solve this for a while now and I've tried different NFS configuration options, before I've found out the GFS2 FS is also hanging. The NFS mount is exported as such: /srv/data/ <ip_address>(rw,async,no_root_squash,no_all_squash,fsid=25) And the NFS client mounts with: mount -o "async,hard,intr,wsize=8192,rsize=8192" active.storage.vlan:/srv/data /srv/data After some tests, these were the configurations that yielded more performance to the cluster. I am desperate to find a solution for this as the cluster is already in production mode and I need to fix this so that this hangs won't happen in the future and I don't really know for sure what and how I should be benchmarking. What I can tell is that this is happening due to heavy loads as I have tested the cluster earlier and this problems weren't happening at all. Please tell me if you need me to provide configuration details of the cluster, and which do you want me to post. As last resort I can migrate the files to a different FS but I need some solid pointers on whether this will solve this problems as the volume size is extremely large at this point. The servers are being hosted by a third-party enterprise and I don't have physical access to them. Best regards. EDIT 1: The servers are physical servers and their specs are: Webservers: Intel Bi Xeon E5606 2x4 2.13GHz 24GB DDR3 Intel SSD 320 2 x 120GB Raid 1 Storage: Intel i5 3550 3.3GHz 16GB DDR3 12 x 2TB SATA Initially there was a VRack setup between the servers but we've upgraded one of the storage servers to have more RAM and it wasn't inside the VRack. They connect through a shared 10Gbps connection between them. Please note that it is the same connection that is used for public access. They use a single IP (using IP Failover) to connect between them and to allow for a graceful failover. NFS is therefore over a public connection and not under any private network (it was before the upgrade, were the problem still existed). The firewall was configured and tested thoroughly but I disabled it for a while to see if the problem still occurred, and it did. From my knowledge the hosting provider isn't blocking or limiting the connection between either the servers and the public domain (at least under a given bandwidth consumption threshold that hasn't been reached yet). Hope this helps figuring out the problem. EDIT 2: Relevant software versions: CentOS 2.6.32-279.9.1.el6.x86_64 nfs-utils-1.2.3-26.el6.x86_64 nfs-utils-lib-1.1.5-4.el6.x86_64 gfs2-utils-3.0.12.1-32.el6_3.1.x86_64 kmod-drbd84-8.4.2-1.el6_3.elrepo.x86_64 drbd84-utils-8.4.2-1.el6.elrepo.x86_64 DRBD configuration on storage servers: #/etc/drbd.d/storage.res resource storage { protocol C; on <server1 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server1 ip>:7788; meta-disk internal; } on <server2 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server2 ip>:7788; meta-disk internal; } } NFS Configuration in storage servers: #/etc/sysconfig/nfs RPCNFSDCOUNT=32 STATD_PORT=10002 STATD_OUTGOING_PORT=10003 MOUNTD_PORT=10004 RQUOTAD_PORT=10005 LOCKD_UDPPORT=30001 LOCKD_TCPPORT=30001 (can there be any conflict in using the same port for both LOCKD_UDPPORT and LOCKD_TCPPORT?) GFS2 configuration: # gfs2_tool gettune <mountpoint> incore_log_blocks = 1024 log_flush_secs = 60 quota_warn_period = 10 quota_quantum = 60 max_readahead = 262144 complain_secs = 10 statfs_slow = 0 quota_simul_sync = 64 statfs_quantum = 30 quota_scale = 1.0000 (1, 1) new_files_jdata = 0 Storage network environment: eth0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip address> Bcast:<bcast address> Mask:<ip mask> inet6 addr: <ip address> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:957025127 errors:0 dropped:0 overruns:0 frame:0 TX packets:1473338731 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2630984979622 (2.3 TiB) TX bytes:1648430431523 (1.4 TiB) eth0:0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip failover address> Bcast:<bcast address> Mask:<ip mask> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 The IP addresses are statically assigned with the given network configurations: DEVICE="eth0" BOOTPROTO="static" HWADDR=<mac address> ONBOOT="yes" TYPE="Ethernet" IPADDR=<ip address> NETMASK=<net mask> and DEVICE="eth0:0" BOOTPROTO="static" HWADDR=<mac address> IPADDR=<ip failover> NETMASK=<net mask> ONBOOT="yes" BROADCAST=<bcast address> Hosts file to allow for a graceful NFS failover in conjunction with NFS option fsid=25 set on both storage servers: #/etc/hosts <storage ip failover address> active.storage.vlan <webserver ip failover address> active.service.vlan As you can see, packet errors are down to 0. I've also ran ping for a long time without any packet loss. MTU size is the normal 1500. As there is no VLan by now, this is the MTU used to communicate between servers. The webservers' network environment is similar. One thing I forgot to mention is that the storage servers handle ~200GB of new files each day through the NFS connection, which is a key point for me to think this is some kind of heavy load problem with either NFS or GFS2. If you need further configuration details please tell me. EDIT 3: Earlier today we had a major filesystem crash on the storage server. I couldn't get the details of the crash right away because the server stop responding. After the reboot, I noticed the filesystem was extremely slow, and I was not being able to serve a single file through either NFS or httpd, perhaps due to cache warming or so. Nevertheless, I've been monitoring the server closely and the following error came up in dmesg. The source of the problem is clearly GFS, which is waiting for a lock and ends up starving after a while. INFO: task nfsd:3029 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. nfsd D 0000000000000000 0 3029 2 0x00000080 ffff8803814f79e0 0000000000000046 0000000000000000 ffffffff8109213f ffff880434c5e148 ffff880624508d88 ffff8803814f7960 ffffffffa037253f ffff8803815c1098 ffff8803814f7fd8 000000000000fb88 ffff8803815c1098 Call Trace: [<ffffffff8109213f>] ? wake_up_bit+0x2f/0x40 [<ffffffffa037253f>] ? gfs2_holder_wake+0x1f/0x30 [gfs2] [<ffffffff814ff42e>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814ff2cb>] mutex_lock+0x2b/0x50 [<ffffffffa0379f21>] gfs2_log_reserve+0x51/0x190 [gfs2] [<ffffffffa0390da2>] gfs2_trans_begin+0x112/0x1d0 [gfs2] [<ffffffffa0369b05>] ? gfs2_dir_check+0x35/0xe0 [gfs2] [<ffffffffa0377943>] gfs2_createi+0x1a3/0xaa0 [gfs2] [<ffffffff8121aab1>] ? avc_has_perm+0x71/0x90 [<ffffffffa0383d1e>] gfs2_create+0x7e/0x1a0 [gfs2] [<ffffffffa037783f>] ? gfs2_createi+0x9f/0xaa0 [gfs2] [<ffffffff81188cf4>] vfs_create+0xb4/0xe0 [<ffffffffa04217d6>] nfsd_create_v3+0x366/0x4c0 [nfsd] [<ffffffffa0429703>] nfsd3_proc_create+0x123/0x1b0 [nfsd] [<ffffffffa041a43e>] nfsd_dispatch+0xfe/0x240 [nfsd] [<ffffffffa025a5d4>] svc_process_common+0x344/0x640 [sunrpc] [<ffffffff810602a0>] ? default_wake_function+0x0/0x20 [<ffffffffa025ac10>] svc_process+0x110/0x160 [sunrpc] [<ffffffffa041ab62>] nfsd+0xc2/0x160 [nfsd] [<ffffffffa041aaa0>] ? nfsd+0x0/0x160 [nfsd] [<ffffffff81091de6>] kthread+0x96/0xa0 [<ffffffff8100c14a>] child_rip+0xa/0x20 [<ffffffff81091d50>] ? kthread+0x0/0xa0 [<ffffffff8100c140>] ? child_rip+0x0/0x20

    Read the article

  • Wubi and Vista 64 bits can't work

    - by Daok
    First of all, I have posted this issue at Ubuntu Forum without success yet. Hello, I have downloaded "kubuntu-9.10-desktop-amd64.iso" and I have mounted it on my Windows Vista 64 bits Ultimate. I have downloaded wubi 9.10. The problem is when installing, it crash after few time. Here is the log file: 11-26 21:07 INFO root: === wubi 9.10ubuntu1 rev160 === 11-26 21:07 DEBUG root: Logfile is c:\users\patrick\appdata\local\temp\wubi-9.10ubuntu1-rev160.log 11-26 21:07 DEBUG root: sys.argv = ['main.pyo', '--exefile="Z:\\wubi.exe"'] 11-26 21:07 DEBUG CommonBackend: data_dir=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\data 11-26 21:07 DEBUG WindowsBackend: 7z=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\bin\7z.exe 11-26 21:07 DEBUG CommonBackend: Fetching basic info... 11-26 21:07 DEBUG CommonBackend: original_exe=Z:\wubi.exe 11-26 21:07 DEBUG CommonBackend: platform=win32 11-26 21:07 DEBUG CommonBackend: osname=nt 11-26 21:07 DEBUG CommonBackend: language=fr_CA 11-26 21:07 DEBUG CommonBackend: encoding=cp1252 11-26 21:07 DEBUG WindowsBackend: arch=amd64 11-26 21:07 DEBUG CommonBackend: Parsing isolist=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\data\isolist.ini 11-26 21:07 DEBUG CommonBackend: Adding distro Xubuntu-i386 11-26 21:07 DEBUG CommonBackend: Adding distro Xubuntu-amd64 11-26 21:07 DEBUG CommonBackend: Adding distro Kubuntu-amd64 11-26 21:07 DEBUG CommonBackend: Adding distro Mythbuntu-i386 11-26 21:07 DEBUG CommonBackend: Adding distro Ubuntu-amd64 11-26 21:07 DEBUG CommonBackend: Adding distro Ubuntu-i386 11-26 21:07 DEBUG CommonBackend: Adding distro Mythbuntu-amd64 11-26 21:07 DEBUG CommonBackend: Adding distro Kubuntu-i386 11-26 21:07 DEBUG CommonBackend: Adding distro KubuntuNetbook-i386 11-26 21:07 DEBUG CommonBackend: Adding distro UbuntuNetbookRemix-i386 11-26 21:07 DEBUG WindowsBackend: Fetching host info... 11-26 21:07 DEBUG WindowsBackend: registry_key=Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi 11-26 21:07 DEBUG WindowsBackend: windows version=vista 11-26 21:07 DEBUG WindowsBackend: windows_version2=Windows (TM) Vista Ultimate 11-26 21:07 DEBUG WindowsBackend: windows_sp=None 11-26 21:07 DEBUG WindowsBackend: windows_build=6002 11-26 21:07 DEBUG WindowsBackend: gmt=-5 11-26 21:07 DEBUG WindowsBackend: country=CA 11-26 21:07 DEBUG WindowsBackend: timezone=America/Montreal 11-26 21:07 DEBUG WindowsBackend: windows_username=Patrick 11-26 21:07 DEBUG WindowsBackend: user_full_name=Patrick 11-26 21:07 DEBUG WindowsBackend: user_directory=C:\Users\Patrick 11-26 21:07 DEBUG WindowsBackend: windows_language_code=1036 11-26 21:07 DEBUG WindowsBackend: windows_language=French 11-26 21:07 DEBUG WindowsBackend: processor_name=Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz 11-26 21:07 DEBUG WindowsBackend: bootloader=vista 11-26 21:07 DEBUG WindowsBackend: system_drive=Drive(C: hd 239816.335938 mb free ntfs) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(C: hd 239816.335938 mb free ntfs) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(D: cd 0.0 mb free ) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(E: hd 483619.367188 mb free ntfs) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(G: hd 84606.9375 mb free fat32) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(Z: cd 0.0 mb free cdfs) 11-26 21:07 DEBUG WindowsBackend: uninstaller_path=C:\ubuntu\uninstall-wubi.exe 11-26 21:07 DEBUG WindowsBackend: previous_target_dir=C:\ubuntu 11-26 21:07 DEBUG WindowsBackend: previous_distro_name=Kubuntu 11-26 21:07 DEBUG WindowsBackend: keyboard_id=269029385 11-26 21:07 DEBUG WindowsBackend: keyboard_layout=ca 11-26 21:07 DEBUG WindowsBackend: keyboard_variant= 11-26 21:07 DEBUG CommonBackend: python locale=('fr_CA', 'cp1252') 11-26 21:07 DEBUG CommonBackend: locale=fr_CA.UTF-8 11-26 21:07 DEBUG WindowsBackend: total_memory_mb=4095.99999905 11-26 21:07 DEBUG CommonBackend: Searching ISOs on USB devices 11-26 21:07 DEBUG CommonBackend: Searching for local CDs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Kubuntu Netbook CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Kubuntu Netbook CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Kubuntu Netbook CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Kubuntu Netbook CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether Z:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: parsing info from str=Kubuntu 9.10 "Karmic Koala" - Release amd64 (20091027) 11-26 21:07 DEBUG Distro: parsed info={'name': 'Kubuntu', 'subversion': 'Release', 'version': '9.10', 'build': '20091027', 'codename': 'Karmic Koala', 'arch': 'amd64'} 11-26 21:07 DEBUG Distro: wrong name: Kubuntu != Ubuntu 11-26 21:07 DEBUG Distro: checking whether Z:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: wrong name: Kubuntu != Ubuntu 11-26 21:07 DEBUG Distro: checking whether Z:\ is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: wrong name: Kubuntu != Ubuntu Netbook Remix 11-26 21:07 DEBUG Distro: checking whether Z:\ is a valid Kubuntu CD 11-26 21:07 INFO Distro: Found a valid CD for Kubuntu: Z:\ 11-26 21:07 INFO root: Running the CD menu... 11-26 21:07 DEBUG WindowsFrontend: __init__... 11-26 21:07 DEBUG WindowsFrontend: on_init... 11-26 21:07 INFO WinuiPage: appname=wubi, localedir=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\translations, languages=['fr_CA', 'fr'] 11-26 21:07 INFO WinuiPage: appname=wubi, localedir=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\translations, languages=['fr_CA', 'fr'] 11-26 21:07 INFO root: CD menu finished 11-26 21:07 INFO root: Already installed, running the uninstaller... 11-26 21:07 INFO root: Running the uninstaller... 11-26 21:07 INFO CommonBackend: This is the uninstaller running 11-26 21:07 INFO WinuiPage: appname=wubi, localedir=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\translations, languages=['fr_CA', 'fr'] 11-26 21:07 INFO root: Received settings 11-26 21:07 INFO WinuiPage: appname=wubi, localedir=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\translations, languages=['fr_CA', 'fr'] 11-26 21:07 DEBUG TaskList: # Running tasklist... 11-26 21:07 DEBUG TaskList: ## Running Sauvegarder l'ISO... 11-26 21:07 DEBUG TaskList: ## Finished Sauvegarder l'ISO 11-26 21:07 DEBUG TaskList: ## Running Supprimer l'entrée pour le programme d'amorçage... 11-26 21:07 DEBUG WindowsBackend: Could not find bcd id 11-26 21:07 DEBUG WindowsBackend: undo_bootini C: 11-26 21:07 DEBUG WindowsBackend: undo_configsys Drive(C: hd 239816.335938 mb free ntfs) 11-26 21:07 DEBUG WindowsBackend: undo_bootini E: 11-26 21:07 DEBUG WindowsBackend: undo_configsys Drive(E: hd 483619.367188 mb free ntfs) 11-26 21:07 DEBUG WindowsBackend: undo_bootini G: 11-26 21:07 DEBUG WindowsBackend: undo_configsys Drive(G: hd 84606.9375 mb free fat32) 11-26 21:07 DEBUG TaskList: ## Finished Supprimer l'entrée pour le programme d'amorçage 11-26 21:07 DEBUG TaskList: ## Running Supprimer le répertoire cible... 11-26 21:07 DEBUG CommonBackend: Deleting C:\ubuntu 11-26 21:07 DEBUG TaskList: ## Finished Supprimer le répertoire cible 11-26 21:07 DEBUG TaskList: ## Running Supprimer la clé du registre... 11-26 21:07 DEBUG TaskList: ## Finished Supprimer la clé du registre 11-26 21:07 DEBUG TaskList: # Finished tasklist 11-26 21:07 INFO root: Almost finished uninstalling 11-26 21:07 INFO root: Finished uninstallation 11-26 21:07 DEBUG CommonBackend: Fetching basic info... 11-26 21:07 DEBUG CommonBackend: original_exe=Z:\wubi.exe 11-26 21:07 DEBUG CommonBackend: platform=win32 11-26 21:07 DEBUG CommonBackend: osname=nt 11-26 21:07 DEBUG WindowsBackend: arch=amd64 11-26 21:07 DEBUG CommonBackend: Parsing isolist=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\data\isolist.ini 11-26 21:07 DEBUG CommonBackend: Adding distro Xubuntu-i386 11-26 21:07 DEBUG CommonBackend: Adding distro Xubuntu-amd64 11-26 21:07 DEBUG CommonBackend: Adding distro Kubuntu-amd64 11-26 21:07 DEBUG CommonBackend: Adding distro Mythbuntu-i386 11-26 21:07 DEBUG CommonBackend: Adding distro Ubuntu-amd64 11-26 21:07 DEBUG CommonBackend: Adding distro Ubuntu-i386 11-26 21:07 DEBUG CommonBackend: Adding distro Mythbuntu-amd64 11-26 21:07 DEBUG CommonBackend: Adding distro Kubuntu-i386 11-26 21:07 DEBUG CommonBackend: Adding distro KubuntuNetbook-i386 11-26 21:07 DEBUG CommonBackend: Adding distro UbuntuNetbookRemix-i386 11-26 21:07 DEBUG WindowsBackend: Fetching host info... 11-26 21:07 DEBUG WindowsBackend: registry_key=Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi 11-26 21:07 DEBUG WindowsBackend: windows version=vista 11-26 21:07 DEBUG WindowsBackend: windows_version2=Windows (TM) Vista Ultimate 11-26 21:07 DEBUG WindowsBackend: windows_sp=None 11-26 21:07 DEBUG WindowsBackend: windows_build=6002 11-26 21:07 DEBUG WindowsBackend: gmt=-5 11-26 21:07 DEBUG WindowsBackend: country=CA 11-26 21:07 DEBUG WindowsBackend: timezone=America/Montreal 11-26 21:07 DEBUG WindowsBackend: windows_username=Patrick 11-26 21:07 DEBUG WindowsBackend: user_full_name=Patrick 11-26 21:07 DEBUG WindowsBackend: user_directory=C:\Users\Patrick 11-26 21:07 DEBUG WindowsBackend: windows_language_code=1036 11-26 21:07 DEBUG WindowsBackend: windows_language=French 11-26 21:07 DEBUG WindowsBackend: processor_name=Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz 11-26 21:07 DEBUG WindowsBackend: bootloader=vista 11-26 21:07 DEBUG WindowsBackend: system_drive=Drive(C: hd 240512.851563 mb free ntfs) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(C: hd 240512.851563 mb free ntfs) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(D: cd 0.0 mb free ) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(E: hd 483523.867188 mb free ntfs) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(G: hd 84445.65625 mb free fat32) 11-26 21:07 DEBUG WindowsBackend: drive=Drive(Z: cd 0.0 mb free cdfs) 11-26 21:07 DEBUG WindowsBackend: uninstaller_path=None 11-26 21:07 DEBUG WindowsBackend: previous_target_dir=None 11-26 21:07 DEBUG WindowsBackend: previous_distro_name=None 11-26 21:07 DEBUG WindowsBackend: keyboard_id=269029385 11-26 21:07 DEBUG WindowsBackend: keyboard_layout=ca 11-26 21:07 DEBUG WindowsBackend: keyboard_variant= 11-26 21:07 DEBUG WindowsBackend: total_memory_mb=4095.99999905 11-26 21:07 DEBUG CommonBackend: Searching ISOs on USB devices 11-26 21:07 DEBUG CommonBackend: Searching for local CDs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Kubuntu Netbook CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Kubuntu Netbook CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Kubuntu Netbook CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether E:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Kubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Kubuntu Netbook CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Xubuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether G:\ is a valid Mythbuntu CD 11-26 21:07 DEBUG Distro: does not contain G:\casper\filesystem.squashfs 11-26 21:07 DEBUG Distro: checking whether Z:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: wrong name: Kubuntu != Ubuntu 11-26 21:07 DEBUG Distro: checking whether Z:\ is a valid Ubuntu CD 11-26 21:07 DEBUG Distro: wrong name: Kubuntu != Ubuntu 11-26 21:07 DEBUG Distro: checking whether Z:\ is a valid Ubuntu Netbook Remix CD 11-26 21:07 DEBUG Distro: wrong name: Kubuntu != Ubuntu Netbook Remix 11-26 21:07 DEBUG Distro: checking whether Z:\ is a valid Kubuntu CD 11-26 21:07 INFO Distro: Found a valid CD for Kubuntu: Z:\ 11-26 21:07 INFO root: Running the installer... 11-26 21:07 INFO WinuiPage: appname=wubi, localedir=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\translations, languages=['fr_CA', 'fr'] 11-26 21:07 INFO WinuiPage: appname=wubi, localedir=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\translations, languages=['fr_CA', 'fr'] 11-26 21:07 DEBUG WinuiInstallationPage: target_drive=C:, installation_size=17000MB, distro_name=Kubuntu, language=en_US, locale=en_US.UTF-8, username=patrick 11-26 21:07 INFO root: Received settings 11-26 21:07 INFO WinuiPage: appname=wubi, localedir=C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\translations, languages=['en_US', 'en'] 11-26 21:07 DEBUG TaskList: # Running tasklist... 11-26 21:07 DEBUG TaskList: ## Running select_target_dir... 11-26 21:07 INFO WindowsBackend: Installing into C:\ubuntu 11-26 21:07 DEBUG TaskList: ## Finished select_target_dir 11-26 21:07 DEBUG TaskList: ## Running create_dir_structure... 11-26 21:07 DEBUG CommonBackend: Creating dir C:\ubuntu 11-26 21:07 DEBUG CommonBackend: Creating dir C:\ubuntu\disks 11-26 21:07 DEBUG CommonBackend: Creating dir C:\ubuntu\install 11-26 21:07 DEBUG CommonBackend: Creating dir C:\ubuntu\install\boot 11-26 21:07 DEBUG CommonBackend: Creating dir C:\ubuntu\disks\boot 11-26 21:07 DEBUG CommonBackend: Creating dir C:\ubuntu\disks\boot\grub 11-26 21:07 DEBUG CommonBackend: Creating dir C:\ubuntu\install\boot\grub 11-26 21:07 DEBUG TaskList: ## Finished create_dir_structure 11-26 21:07 DEBUG TaskList: ## Running uncompress_target_dir... 11-26 21:07 DEBUG TaskList: ## Finished uncompress_target_dir 11-26 21:07 DEBUG TaskList: ## Running create_uninstaller... 11-26 21:07 DEBUG WindowsBackend: Copying uninstaller Z:\wubi.exe -> C:\ubuntu\uninstall-wubi.exe 11-26 21:07 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi UninstallString C:\ubuntu\uninstall-wubi.exe 11-26 21:07 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi InstallationDir C:\ubuntu 11-26 21:07 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayName Kubuntu 11-26 21:07 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayIcon C:\ubuntu\Kubuntu.ico 11-26 21:07 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayVersion 9.10ubuntu1-rev160 11-26 21:07 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi Publisher Kubuntu 11-26 21:07 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi URLInfoAbout http://www.kubuntu.org 11-26 21:07 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi HelpLink http://www.ubuntu.com/support 11-26 21:07 DEBUG TaskList: ## Finished create_uninstaller 11-26 21:07 DEBUG TaskList: ## Running copy_installation_files... 11-26 21:07 DEBUG WindowsBackend: Copying C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\data\custom-installation -> C:\ubuntu\install\custom-installation 11-26 21:07 DEBUG WindowsBackend: Copying C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\winboot -> C:\ubuntu\winboot 11-26 21:07 DEBUG WindowsBackend: Copying C:\Users\Patrick\AppData\Local\Temp\pyl5A09.tmp\data\images\Kubuntu.ico -> C:\ubuntu\Kubuntu.ico 11-26 21:07 DEBUG TaskList: ## Finished copy_installation_files 11-26 21:07 DEBUG TaskList: ## Running get_iso... 11-26 21:07 DEBUG TaskList: New task copy_file 11-26 21:07 DEBUG TaskList: ### Running copy_file... 11-26 21:09 DEBUG TaskList: ### Finished copy_file 11-26 21:09 ERROR TaskList: [Errno 22] Invalid argument Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\utils.py", line 209, in copy_file IOError: [Errno 22] Invalid argument 11-26 21:09 DEBUG TaskList: # Cancelling tasklist 11-26 21:09 DEBUG TaskList: New task check_iso 11-26 21:09 ERROR root: [Errno 22]

    Read the article

  • unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

    - by jon
    I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

    Read the article

  • Converting linear colors to SRGB shows banding in FFmpeg

    - by user1863947
    When I convert an EXR file sequence with x264 using FFmpeg and convert the colorspace from linear to SRGB (with gamma 0.45454545) I get some heavy banding issues (most visible on a dark gradient). Here is the ffmpeg command I use: C:/ffmpeg.exe -y -i C:/seq_v001.%04d.exr -vf lutrgb=r=gammaval(0.45454545):g=gammaval(0.45454545):b=gammaval(0.45454545) -vcodec libx264 -pix_fmt yuv420p -preset slow -crf 18 -r 25 C:/out.mov Here is the output: ffmpeg version N-47062-g26c531c Copyright (c) 2000-2012 the FFmpeg developers built on Nov 25 2012 12:25:21 with gcc 4.7.2 (GCC) configuration: --enable-gpl --enable-version3 --disable-pthreads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libutvideo --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 9.100 / 52. 9.100 libavcodec 54. 77.100 / 54. 77.100 libavformat 54. 37.100 / 54. 37.100 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 23.102 / 3. 23.102 libswscale 2. 1.102 / 2. 1.102 libswresample 0. 17.101 / 0. 17.101 libpostproc 52. 2.100 / 52. 2.100 Input #0, image2, from 'C:/seq_v001.%04d.exr': Duration: 00:00:09.60, start: 0.000000, bitrate: N/A Stream #0:0: Video: exr, rgb48le, 960x540 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 25 tbn, 25 tbc [libx264 @ 0000000004d11540] using SAR=1/1 [libx264 @ 0000000004d11540] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0000000004d11540] profile High, level 3.1 [libx264 @ 0000000004d11540] 264 - core 128 r2216 198a7ea - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=5 deblock=1:0:0 analyse=0x3:0x113 me=umh subme=8 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=18 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=2 b_bias=0 direct=3 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=50 rc=crf mbtree=1 crf=18.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mov, to 'C:/out.mov': Metadata: encoder : Lavf54.37.100 Stream #0:0: Video: h264 (avc1 / 0x31637661), yuv420p, 960x540 [SAR 1:1 DAR 16:9], q=-1--1, 12800 tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (exr -> libx264) Press [q] to stop, [?] for help [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute frame= 16 fps=0.0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute frame= 34 fps= 33 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute frame= 52 fps= 34 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute frame= 68 fps= 34 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute frame= 85 fps= 33 q=23.0 size= 47kB time=00:00:00.44 bitrate= 867.5kbits/s Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute frame= 104 fps= 34 q=23.0 size= 94kB time=00:00:01.20 bitrate= 640.3kbits/s Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute frame= 121 fps= 34 q=23.0 size= 133kB time=00:00:01.88 bitrate= 577.8kbits/s Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute frame= 139 fps= 34 q=23.0 size= 172kB time=00:00:02.60 bitrate= 543.4kbits/s Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute frame= 157 fps= 34 q=23.0 size= 213kB time=00:00:03.32 bitrate= 525.6kbits/s Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute frame= 175 fps= 34 q=23.0 size= 254kB time=00:00:04.04 bitrate= 516.0kbits/s Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute frame= 193 fps= 35 q=23.0 size= 287kB time=00:00:04.76 bitrate= 494.6kbits/s Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute frame= 211 fps= 35 q=23.0 size= 332kB time=00:00:05.48 bitrate= 496.4kbits/s Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute frame= 228 fps= 34 q=23.0 size= 421kB time=00:00:06.16 bitrate= 559.8kbits/s frame= 240 fps= 32 q=-1.0 Lsize= 708kB time=00:00:09.52 bitrate= 609.3kbits/s video:705kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.505636% [libx264 @ 0000000004d11540] frame I:2 Avg QP:15.07 size: 18186 [libx264 @ 0000000004d11540] frame P:73 Avg QP:16.51 size: 3719 [libx264 @ 0000000004d11540] frame B:165 Avg QP:18.38 size: 2502 [libx264 @ 0000000004d11540] consecutive B-frames: 2.5% 3.3% 42.5% 51.7% [libx264 @ 0000000004d11540] mb I I16..4: 46.2% 33.3% 20.4% [libx264 @ 0000000004d11540] mb P I16..4: 6.8% 2.0% 0.6% P16..4: 29.4% 10.5% 4.6% 0.0% 0.0% skip:46.1% [libx264 @ 0000000004d11540] mb B I16..4: 1.8% 0.7% 0.2% B16..8: 40.9% 6.5% 0.3% direct: 1.2% skip:48.5% L0:52.0% L1:47.5% BI: 0.5% [libx264 @ 0000000004d11540] 8x8 transform intra:24.7% inter:81.3% [libx264 @ 0000000004d11540] direct mvs spatial:93.3% temporal:6.7% [libx264 @ 0000000004d11540] coded y,uvDC,uvAC intra: 10.7% 31.4% 24.9% inter: 2.3% 9.0% 2.9% [libx264 @ 0000000004d11540] i16 v,h,dc,p: 83% 11% 6% 1% [libx264 @ 0000000004d11540] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 9% 9% 52% 6% 4% 4% 5% 5% 5% [libx264 @ 0000000004d11540] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 11% 44% 5% 4% 3% 3% 4% 3% [libx264 @ 0000000004d11540] i8c dc,h,v,p: 69% 15% 15% 2% [libx264 @ 0000000004d11540] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0000000004d11540] ref P L0: 48.9% 0.1% 16.8% 17.0% 11.3% 5.8% [libx264 @ 0000000004d11540] ref B L0: 57.7% 21.9% 13.9% 6.4% [libx264 @ 0000000004d11540] ref B L1: 82.4% 17.6% [libx264 @ 0000000004d11540] kb/s:600.61 For me it looks like it converts the video first and afterwards applies the gamma correction on 8-bit clipped video. Does someone have an idea?

    Read the article

  • ruby regex, parsing html

    - by danwoods
    Hello all, I'm trying to parse some returned html to look for currently playing movies. The pattern I'm trying to match looks like: <span dir=ltr>Clash of the Titans</span> Of which there are several in the returned html. (the html is huge, I've posted a sample at the bottom) I'm trying get an array of the movie titles with the following command: titles = listings_html.split(/(<span dir=ltr>).*(<\/span>)/) But I'm not getting the results I'm expecting. Can anyone see a problem with my approach or regex? Returned html (I believe the 'markdown'formating will render the some of the html, but this is just an example): <script>window.gbar={};(function(){function h(a,b,d){var c="on"+b;if(a.addEventListener)a.addEventListener(b,d,false);else if(a.attachEvent)a.attachEvent(c,d);else{var f=a[c];a[c]=function(){var e=f.apply(this,arguments),g=d.apply(this,arguments);return e==undefined?g:g==undefined?e:g&&e}}};var i=window.gbar,k,l,m;function n(a){var b=window.encodeURIComponent&&(document.forms[0].q||"").value;if(b)a.href=a.href.replace(/([?&])q=[^&]*|$/,function(d,c){return(c||"&")+"q="+encodeURIComponent(b)})}i.qs=n;function o(a,b,d,c,f,e){var g=document.getElementById(a);if(g){var j=g.style;j.left=c?"auto":b+"px";j.right=c?b+"px":"auto";j.top=d+"px";j.visibility=l?"hidden":"visible";if(f&&e){j.width=f+"px";j.height=e+"px"}else{o(k,b,d,c,g.offsetWidth,g.offsetHeight);l=l?"":a}}}i.tg=function(a){a=a||window.event;var b,d=a.target||a.srcElement;a.cancelBubble=true;if(k!=null)p(d);else{b=document.createElement(Array.every||window.createPopup?"iframe":"div");b.frameBorder="0";k=b.id="gbs";b.src="javascript:''";d.parentNode.appendChild(b);h(document,"click",i.close);p(d);i.alld&&i.alld(function(){var c=document.getElementById("gbli");if(c){var f=c.parentNode;q(f,c);var e=c.prevSibling;f.removeChild(c);i.removeExtraDelimiters(f,e);b.style.height=f.offsetHeight+"px"}})}};function r(a){var b,d=document.defaultView;if(d&&d.getComputedStyle){if(a=d.getComputedStyle(a,""))b=a.direction}else b=a.currentStyle?a.currentStyle.direction:a.style.direction;return b=="rtl"}function p(a){var b=0;if(a.className!="gb3")a=a.parentNode;var d=a.getAttribute("aria-owns")||"gbi",c=a.offsetWidth,f=a.offsetTop>20?46:24,e=false;do b+=a.offsetLeft||0;while(a=a.offsetParent);a=(document.documentElement.clientWidth||document.body.clientWidth)-b-c;c=r(document.body);if(d=="gbi"){var g=document.getElementById("gbi");q(g,document.getElementById("gbli")||g.firstChild);if(c){b=a;e=true}}else if(!c){b=a;e=true}l!=d&&i.close();o(d,b,f,e)}i.close=function(){l&&o(l,0,0)};function s(a,b,d){if(!m){m="gb2";if(i.alld){var c=i.findClassName(a);if(c)m=c}}a.insertBefore(b,d).className=m}function q(a,b){for(var d,c=window.navExtra;c&&(d=c.pop());)s(a,d,b)}i.addLink=function(a,b,d){if((b=document.getElementById(b))&&a){a.className="gb4";var c=document.createElement("span");c.appendChild(a);c.appendChild(document.createTextNode(" | "));c.id=d;b.appendChild(c)}}})();if(!window.google)window.google={};if(!window.google.movies)window.google.movies={};window.google.movies.registerFixdir=function(){var c="[\u0000- !-@[-{-\u00bf\u00d7\u00f7\u02b9-\u02ff\u2000-\u2bff]",g=new RegExp("^"+c+"([0-9]"+c+"$|[A-Za-z\u00c0-\u00d6\u00d8-\u00f6\u00f8-\u02b8\u0300-\u0590\u0800-\u1fff\u2c00-\ufb1c\ufdfe-\ufe6f\ufefd-\uffff])"),h=new RegExp("^"+c+"$");function e(d,a){if(!a)a=d&&d.target?d.target:window.event.srcElement;a.dir=g.test(a.value)?"ltr":(h.test(a.value)?"":"rtl")} var i=[document.getElementsByName("q")[0],document.getElementById("mtq")];for(var f=0,b;b=i[f];f++)if(b){b.onkeyup=e;e(null,b)}}; Movie Showtimes - Google Search.fl:link{}a:link,.w,a.w:link,.w a:link{color:#00c}a:visited{color:#551a8b}a:active{color:red}.t a:link,.t a:active,.t a:visited,.t{color:#000}.left{width:12em}.box{background:#fff}.nopadding{padding:0}.k{background:#36c}.z{display:none}.x{width:3em}.y{width:23em}.b{color:#00c;font-size:12pt;font-weight:bold}.i,.i:link{color:#a90a08}.n a{color:#000;font-size:10pt}.n .b a{color:#00c}.n .i{font-size:10pt;font-weight:bold}.h{cursor:pointer}body{background:#fff;font:82% Arial,Helvetica,sans-serif;margin:3px 0 0;padding:0}table{border-collapse:collapse;border-spacing:0}img{border:0}td,th{vertical-align:top}h1,h2{font-size:100%;margin:0}a{color:#00c}/ CSS for page */#title_bar{background:#f0f7f9;border-top:1px solid #6b90da;padding-bottom:4px;padding-left:8px;padding-top:4px}#google_bar{margin:3px 10px}#search_form{margin:3px 10px}#left_nav{border-right:1px solid #c9d7f1;margin-top:11px;position:absolute;left:9px;width:13.4em}#left_nav .section{margin-bottom:1.2em}.hidden{visibility:hidden}#results{height:auto !important;height:350px;margin-left:15em;min-height:350px;min-width:800px;width:expression(document.body.clientWidth<1000?"800px":"99.9%")}.name{font-size:124%;margin:0}.times{clear:both;margin:0}.address{margin:0}#movie_results{overflow:auto}.movie_results{margin-top:11px}.movie{clear:both;margin-bottom:40px}.movie .header{padding-left:8px}.movie .img{border:1px solid #ccc;float:left;margin-bottom:10px}.movie .desc{margin-bottom:15px;max-width:42em}.movie h2{font-size:124%;margin-bottom:2px}.movie .info{margin-bottom:10px}.movie .syn{margin-bottom:10px}.movie .section_title{background:#f0f7f9;clear:both;font-size:108%;margin-bottom:11px;margin-top:11px;padding-bottom:4px;padding-left:8px;padding-top:5px}.movie .showtimes{margin-bottom:8px;padding-left:8px}.movie .show_left{width:49%}.movie .show_right{width:49%}.movie .theater{padding-bottom:15px}.theater{clear:both;padding-bottom:1px}.theater_after_icon{padding-left:25px}.theater .show_left{width:49%}.theater .show_right{width:49%}.theater h2{font-size:124%;margin-bottom:2px}.theater .icon{float:left;height:3em;margin-right:5px}.theater .closure{font-size:100%}.theater .info{font-size:100%;padding-bottom:5px;padding-top:5px}.theater .movie{margin-bottom:8px;margin-right:8px;max-width:42em}.theater .movie .desc{margin-bottom:5px;margin-left:0}.theater .movie .info{margin-top:0}.theater .showtimes{margin-bottom:40px;margin-top:8px}#theater_map{right:0;left:0;position:relative;top:0}#theater_static_map{border:1px solid #c9d7f1;margin:10px}.map_marker .name{margin-top:10px}.photo{border:1px solid #ccc;margin-bottom:20px;margin-left:8px}.show_left{float:left;margin:0;width:49.999%}.show_right{float:right;margin:0;width:50%}.show_more{clear:both;font-size:124%;margin:0}.show_more a{color:#77c}.reviews{margin-bottom:8px;padding-left:8px}.review{margin-bottom:5px}.review .publisher{color:green}.review .date{color:#6f6f6f}.trailer{margin-bottom:8px;padding-left:8px}.clear{clear:both}.iconA{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 0}.iconB{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -38px}.iconC{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -76px}.iconD{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -114px}.iconE{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -152px}.iconF{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -190px}.iconG{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -228px}.iconH{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -266px}.iconI{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -304px}.iconJ{background:url(http://maps.gstatic.com/mapfiles/red_icons_A_J.png) repeat 0 -342px}.iconK{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 0}.iconL{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -38px}.iconM{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -76px}.iconN{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -114px}.iconO{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -152px}.iconP{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -190px}.iconQ{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -228px}.iconR{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -266px}.iconS{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -304px}.iconT{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -342px}.iconU{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -380px}.iconV{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -418px}.iconW{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -456px}.iconX{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -494px}.iconY{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -532px}.iconZ{background:url(http://maps.gstatic.com/mapfiles/red_icons_K_Z.png) repeat 0 -570px}#gbar,#guser{font-size:13px;padding-top:1px !important}#gbar{float:left;height:22px}#guser{padding-bottom:7px !important;text-align:right}.gbh,.gbd{border-top:1px solid #c9d7f1;font-size:1px}.gbh{height:0;position:absolute;top:24px;width:100%}#gbs,.gbm{background:#fff;left:0;position:absolute;text-align:left;visibility:hidden;z-index:1000}.gbm{border:1px solid;border-color:#c9d7f1 #36c #36c #a2bae7;z-index:1001}.gb1{margin-right:.5em}.gb1,.gb3{zoom:1}.gb2{display:block;padding:.2em .5em;}.gb2,.gb3{text-decoration:none;border-bottom:none}a.gb1,a.gb2,a.gb3,a.gb4{color:#00c !important}.gbi .gb3,.gbi .gb2,.gbi .gb4{color:#dd8e27 !important}.gbf .gb3,.gbf .gb2,.gbf .gb4{color:#900 !important}a.gb2:hover{background:#36c;color:#fff !important}Web Images Videos Maps News Shopping Gmail more ▼Books Finance Translate Scholar Blogs YouTube Calendar Photos Documents Reader Sites Groups even more » [email protected] | Google Account settings | Sign out     Advanced Search  PreferencesShowtimes for Murfreesboro, TN 37130Change Location› Today › Tomorrow › Monday › Tuesday› Theaters › Movies› Show list view › Show map viewPremiere 6 Theater810 Northwest Broad Street, Murfreesboro, TN - (615) 896-4100Clash of the Titans? - 1hr 50min?? - Rated PG-13?? - Action/Adventure? - Trailer - IMDb2:10  4:15  6:15  8:20  10:25pmDiary of a Wimpy Kid? - 1hr 33min?? - Rated PG?? - Comedy/Drama? - Trailer - IMDb2:00  3:50  6:00  7:50  9:40pmHow to Train Your Dragon?1hr 38min?? - Rated PG?? - Family/Animation? - IMDb2:00  3:55  6:00  7:55  9:50pmThe Bounty Hunter? - 1hr 46min?? - Rated PG-13?? - Action/Adventure/Comedy/Romance? - Trailer - IMDb2:15  4:15  6:25  8:25  10:30pmThe Last Song? - 1hr 47min?? - Rated PG?? - Drama? - Trailer - IMDb2:20  4:15  6:30  8:35  10:35pmTyler Perry's Why Did I Get Married Too?2hr 1min?? - Rated PG-13?? - Comedy?2:20  4:35  7:30  9:45pmContinental Cinema 5450 US Highway 231 N, Troy, AL - (334) 808-4225Clash of the Titans 3D? - 1hr 50min?? - Rated PG-13?? - Action/Adventure? - IMDb1:00  4:00  7:00  9:30pmHow to Train Your Dragon 3D? - 1hr 38min?? - Rated PG?? - Family/Animation? - IMDb1:05  4:05  7:05  9:25pmThe Bounty Hunter? - 1hr 46min?? - Rated PG-13?? - Action/Adventure/Comedy/Romance? - Trailer - IMDb1:00  4:00  7:00  9:30pmThe Last Song? - 1hr 47min?? - Rated PG?? - Drama? - Trailer - IMDb1:05  4:05  7:05  9:25pmTyler Perry's Why Did I Get Married Too?2hr 1min?? - Rated PG-13?? - Comedy?12:55  3:55  6:55  9:35pmMall Cinema - Hartford KYUS Hwy 231 South 62 East, Hartford, KY - (270) 298-3315Clash of the Titans? - 1hr 50min?? - Rated PG-13?? - Action/Adventure? - Trailer - IMDb5:00  7:00  9:00pmHow to Train Your Dragon?1hr 38min?? - Rated PG?? - Family/Animation? - IMDb5:00  7:00  9:00pmCarmike Wynnsong 16 - Murfreesboro2626 Cason Square Boulevard, Murfreesboro, TN - (615) 893-2253The Last Song? - 1hr 47min?? - Rated PG?? - Drama? - Trailer - IMDb12:15  1:00  2:45  4:00  5:15  7:00  7:45 

    Read the article

  • Getting Selected Dropdown content to show in a form-generated email

    - by fmz
    I have a small contact form: <form method="post" action="contact.php" name="contactform" id="contactform"> <fieldset> <legend>Please fill in the following form to contact us</legend> <label for="name"><span class="required">*</span> Your Name</label> <input name="name" type="text" id="name" size="30" value="" /> <br /> <label for="company"><span class="required">*</span> Company</label> <input name="company" type="text" id="name" size="30" value="" /> <br /> <label for="email"><span class="required">*</span> Email</label> <input name="email" type="text" id="email" size="30" value="" /> <br /> <label for="phone"><span class="required">*</span> Phone</label> <input name="phone" type="text" id="phone" size="30" value="" /> <br /> <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" style="width: 300px; height:35px;"> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> <br /> <label for=comments><span class="required">*</span> Comments</label> <textarea name="comments" cols="40" rows="3" id="comments" style="width: 350px;"></textarea> <p><span class="required">*</span> Please help us control spam.</p> <label for=verify accesskey=V>&nbsp;&nbsp;&nbsp;3 + 1 =</label> <input name="verify" type="text" id="verify" size="4" value="" style="width: 30px;" /><br /><br /> <input type="submit" class="submit" id="submit" value="Submit" /> </fieldset> </form> I want to send the results of the form in a php generated email. Everything is coming through except the selected contents of the "purpose" drop down. Here is the PHP: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($company) == '') { echo '<div class="error_message">Attention! Please enter your company name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> What am I missing? Thanks.

    Read the article

< Previous Page | 65 66 67 68 69 70  | Next Page >