Search Results

Search found 5926 results on 238 pages for 'driver verifier'.

Page 69/238 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• Only One GPU Detected in the Nvidia Quadra NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• Screen flickers after resuming from hibernate with Intel GMA 3600 (Acer D270 with Intel N2600)

  - by Cameron

  Fresh system install, with correct display driver from Intel (8.14.8.1065). Clicking "Update driver" merely results in a message saying the driver was already up-to-date. After resuming from hibernate the entire screen flickers. This is especially noticeable while using IE9 (which has hardware acceleration enabled by default) on Google maps, in particular while typing in an address in the map search field (the flickering is much worse under these circumstances). Note that sleep worked fine, only hibernate causes this issue. Restarting "fixes" the problem temporarily until the next hibernate-resume. Aero is enabled. This is on Windows 7 (Pro) 32-bit, on an Acer Aspire One D270-1998, with the Intel N2600 (which has the Intel GMA 3600 built-in).

  Read the article

• Is it a missing implementation with JPA implementation of hibernate??

  - by Jegan

  Hi all, On my way in understanding the transaction-type attribute of persistence.xml, i came across an issue / discrepency between hibernate-core and JPA-hibernate which looks weird. I am not pretty sure whether it is a missing implementation with JPA of hibernate. Let me post the comparison between the outcome of JPA implementation and the hibernate implementation of the same concept. Environment Eclipse 3.5.1 JSE v1.6.0_05 Hibernate v3.2.3 [for hibernate core] Hibernate-EntityManger v3.4.0 [for JPA] MySQL DB v5.0 Issue 1.Hibernate core package com.expt.hibernate.core; import java.io.Serializable; public final class Student implements Serializable { private int studId; private String studName; private String studEmailId; public Student(final String studName, final String studEmailId) { this.studName = studName; this.studEmailId = studEmailId; } public int getStudId() { return this.studId; } public String getStudName() { return this.studName; } public String getStudEmailId() { return this.studEmailId; } private void setStudId(int studId) { this.studId = studId; } private void setStudName(String studName) { this.studName = stuName; } private void setStudEmailId(int studEmailId) { this.studEmailId = studEmailId; } } 2. JPA implementaion of Hibernate package com.expt.hibernate.jpa; import java.io.Serializable; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.GeneratedValue; import javax.persistence.Id; import javax.persistence.Table; @Entity @Table(name = "Student_Info") public final class Student implements Serializable { @Id @GeneratedValue @Column(name = "STUD_ID", length = 5) private int studId; @Column(name = "STUD_NAME", nullable = false, length = 25) private String studName; @Column(name = "STUD_EMAIL", nullable = true, length = 30) private String studEmailId; public Student(final String studName, final String studEmailId) { this.studName = studName; this.studEmailId = studEmailId; } public int getStudId() { return this.studId; } public String getStudName() { return this.studName; } public String getStudEmailId() { return this.studEmailId; } } Also, I have provided the DB configuration properties in the associated hibernate-cfg.xml [in case of hibernate core] and persistence.xml [in case of JPA (hibernate entity manager)]. create a driver and perform add a student and query for the list of students and print their details. Then the issue comes when you run the driver program. Hibernate core - output Exception in thread "main" org.hibernate.InstantiationException: No default constructor for entity: com.expt.hibernate.core.Student at org.hibernate.tuple.PojoInstantiator.instantiate(PojoInstantiator.java:84) at org.hibernate.tuple.PojoInstantiator.instantiate(PojoInstantiator.java:100) at org.hibernate.tuple.entity.AbstractEntityTuplizer.instantiate(AbstractEntityTuplizer.java:351) at org.hibernate.persister.entity.AbstractEntityPersister.instantiate(AbstractEntityPersister.java:3604) .... .... This exception is flashed when the driver is executed for the first time itself. JPA Hibernate - output First execution of the driver on a fresh DB provided the following output. DEBUG SQL:111 - insert into student.Student_Info (STUD_EMAIL, STUD_NAME) values (?, ?) 17:38:24,229 DEBUG SQL:111 - select student0_.STUD_ID as STUD1_0_, student0_.STUD_EMAIL as STUD2_0_, student0_.STUD_NAME as STUD3_0_ from student.Student_Info student0_ student list size == 1 1 || Jegan || [email protected] second execution of the driver provided the following output. DEBUG SQL:111 - insert into student.Student_Info (STUD_EMAIL, STUD_NAME) values (?, ?) 17:40:25,254 DEBUG SQL:111 - select student0_.STUD_ID as STUD1_0_, student0_.STUD_EMAIL as STUD2_0_, student0_.STUD_NAME as STUD3_0_ from student.Student_Info student0_ Exception in thread "main" javax.persistence.PersistenceException: org.hibernate.InstantiationException: No default constructor for entity: com.expt.hibernate.jpa.Student at org.hibernate.ejb.AbstractEntityManagerImpl.throwPersistenceException(AbstractEntityManagerImpl.java:614) at org.hibernate.ejb.QueryImpl.getResultList(QueryImpl.java:76) at driver.StudentDriver.main(StudentDriver.java:43) Caused by: org.hibernate.InstantiationException: No default constructor for entity: com.expt.hibernate.jpa.Student .... .... Could anyone please let me know if you have encountered this sort of inconsistency? Also, could anyone please let me know if the issue is a missing implementation with JPA-Hibernate? ~ Jegan

  Read the article

• Where to install JDBC drivers in Hyperic Server

  - by Svish

  I have installed Hyperic Server 4.4.0 and I want to use an SQL plugin that connects to an Oracle database. To make this work on the Agent i had to download a JDBC driver for Oracle and put it in [agent-dir]/bundles/[bundle-dir]/pdk/lib. I can now run my plugin on the agent using java -jar hq-products.jar .... Now I want to add it so that it shows up in the server hq. I put the plugin in the appropriate directory and I can add it as a platform service. However, when i try to configure the plugin I get the following error: No suitable driver found for jdbc:oracle:thin:@blah.blah:blah:blah This is the same error I got on the client before I added the Oracle JDBC driver, so I assume that's the problem here too. But where do I put the JDBC drivers on the server?

  Read the article

• SCCM deploy from VMware XP image

  - by HannesFostie

  We recently set up the latest version of SCCM and I managed to capture a .wim image from a virtual machine (build and capture task sequence). I want to use this .wim file to deploy winXP to different hardware, and therefor need to add device drivers to the task sequence. I created a driver package per laptop type, and deployed for the first time. However, I am getting a BSOD (0x00007B) which leads me to believe theres a problem with the storage drivers. After adjusting the task sequence to try and point to the mass storage drivers (which are applied at F6, I suppose) I do not get a list of compatible drivers (the list is empty). I looked around, and found some issues regarding hdc class drivers that are not recognized as mass storage drivers. The workaround suggested changing the INF file to make the driver a SCSIAdapter class driver, and importing these again, but to no avail. The list remains empty. Any help is much appreciated

  Read the article

• Does Windows 7 support multiple simultaneous nVidia graphics cards with different drivers?

  - by mckenzieg1

  On one of my dev machines at work (currently running XP), I have two nVidia graphics cards: Quadro NVS 440 (my original card, for my three primary monitors) GeForce GTX 275 (just added, for CUDA development) I can get both cards to work OK by installing the latest GeForce drivers, but I get some annoying-but-not-crippling display artifacts on the Quadro's screens (mostly scattered black rectanges where repainting fails for a few bits of UI in certain applications). Under XP, this seems to be the best I can do. I can use Device Manager to supposedly install different nVidia drivers for the two cards (the latest Quadro drivers for the NVS, the latest GeForce drivers for the GTX), but I actually end up with the same driver for both, because the driver dlls all have the same names and get installed on top of one another in the system directory. I have read that Win7 has a new video driver architecture that better supports multiple heterogeneous cards. Does anyone know if that will handle my scenario? If so, it will give me a compelling reason to get that machine on Win7 ASAP.

  Read the article

• Only One GPU Detected in the Nvidia Quadro NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• Drag lock crisis with Windows 7 and Apple Magic Trackpad

  - by rockinthesixstring

  This is driving me insane and I've scowered the web for two days trying to fix this. I just picked up an Apple Magic Trackpad to be used exclusively on a Windows 7 PC (not apple with bootcamp). I found a nice driver that got it working right away, but when I'm moving the cursor around the screen, often it will begin "highlighting" text, or picking up and dragging things I don't want it to. I looked in the "regedit" where people are saying there is binary that can be changed, however the driver I installed doesn't use the binary being suggested. Can anyone suggest a better driver for my situation or a way to disable the drag lock that is driving me so nuts? I don't mind not being able to lift my finger when dragging, it's a far better compromise than having the insane feature.

  Read the article

• Trackpad Drag lock pissing me off with Windows 7

  - by rockinthesixstring

  This is driving me insane and I've scowered the web for two days trying to fix this. I just picked up an Apple Magic Trackpad to be used exclusively on a Windows 7 PC (not apple with bootcamp). I found a nice driver that got it working right away, but when I'm moving the cursor around the screen, often it will begin "highlighting" text, or picking up and dragging things I don't want it to. I looked in the "regedit" where people are saying there is binary that can be changed, however the driver I installed doesn't use the binary being suggested. Can anyone suggest a better driver for my situation or a way to disable the drag lock that is driving me so nuts? I don't mind not being able to lift my finger when dragging, it's a far better compromise than having the insane feature.

  Read the article

• How to disable Windows File Protection in Windows XP or 7 from Registry?

  - by SEARAS

  How to disable Windows File Protection in Windows 7 and/or XP from Registry? I want to automatically replace a driver with my created driver. I used PendingFileRenameOperations key in HKLM\System\CurrentControlSet\Control\Session Manager but i've found that it can ONLY be used for simple (not-system) files, because Windows File Protection disables it for system files (see this post). Now I need to temporarily disable WFP (and turn it on after changing driver). You can tell me another way to disable it. It can help me too. Thanks in advance! Any ideas?

  Read the article

• What are working xorg.conf settings for using a Matrox TripleHead2Go @ 5040x1050?

  - by Brendan Abel

  I'm trying to configure xorg.conf to correctly set the resolution of my screens. I'm using a matrox triplehead, so the monitor is a single 5040x1050 screen. Unfortunately, it's being incorrectly set to 3840x1024. Here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Matrox" HorizSync 31.5 - 80.0 VertRefresh 57.0 - 75.0 #Option "DPMS" Modeline "5040x1050@60" 451.27 5040 5072 6784 6816 1050 1071 1081 1103 #Modeline "5040x1050@59" 441.28 5040 5072 6744 6776 1050 1071 1081 1103 #Modeline "5040x1050@57" 421.62 5040 5072 6672 6704 1050 1071 1081 1103 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GTX+" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "5040x1050" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Serial converter - cat /dev/ttyUSB0 hangs on open

  - by Alex

  I am using Ubuntu 11.04 and attached a Garmin data cable. The device gets recognized [17718.502138] USB Serial support registered for pl2303 [17718.502181] pl2303 2-1:1.0: pl2303 converter detected [17718.513416] usb 2-1: pl2303 converter now attached to ttyUSB0 [17718.513443] usbcore: registered new interface driver pl2303 [17718.513446] pl2303: Prolific PL2303 USB to serial adaptor driver ... but when I do a strace cat /dev/ttyUSB0 it hangs on the open part and does not continue any more open("/dev/ttyUSB0", O_RDONLY|O_LARGEFILEC If I do the same on Ubuntu 12.04 it stops on fread(" ... ") which is okay, as there is currently no data comming in at this port. I am not sure if it is just a different configuration of the system or an driver related problem. How can I track this down further? Unfortunately I can not update the old Ubuntu 11.04 system for different reasons at the moment.

  Read the article

• Different graphic cards drivers while booting from external media

  - by goran

  I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

  Read the article

• Completely clean previous Radeon drivers on Windows 7 64bit

  - by tomo

  Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

  Read the article

• Identifying the version of ATI Catalyst drivers

  - by Snark

  I have bought a new video card based on the ATI Radeon HD 5670 chipset. I couldn't make it work with the latest ATI Catalyst drivers found on their website, only the drivers found on the CD delivered with the card worked. How can I know the version of Catalyst that is installed on my PC (running Windows 7 64-bits)? The ATI Catalyst Control Center returns the following information: Driver Packaging Version 8.673-091110a-092263C Provider ATI Technologies Inc. 2D Driver Version 8.01.01.973 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS/{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 Direct3D Version 8.14.10.0708 OpenGL Version 6.14.10.9120 Catalyst™ Control Center Version 2009.1110.2225.40230 I do not recognize anything pointing to a "marketing version". The website says the current version of Catalyst is 10.2.

  Read the article

• modprobe ndiswrapper - not found

  - by David

  I'm trying to use ndiswrapper on a Slackware 12 (I think) box, but I'm running into a problem with modprobe. Everything I find online says that it should be working, but for some unknown reason it isn't. Here's what I've done so far: Installed ndiswrapper (latest tarball, make, make install) Ran ndiswrapper -i on the WinXP driver for my USB wireless card Ran ndiswrapper -l which tells me the driver is present and the device is present (lsusb also confirms the device is present) Ran ndiswrapper -m which put an alias for wlan0 in /etc/modprobe.d/ndiswrapper.conf Ran depmod -a Ran modprobe ndiswrapper which tells me "FATAL: module ndiswrapper not found" Ran modprobe -l which shows no listing for ndiswrapper I even tossed in a reboot or two while trying various combinations of the above, still nothing. So naturally ifconfig wlan0 up isn't working because the device isn't being created, presumably because the module isn't loading the driver. Does anybody have any suggestions? Everything points to the notion that this should work fine, but modprobe just isn't able to find what it needs. Have I missed an important step?

  Read the article

• How to dual OS 32-bit/64-bit Windows 7 Ultimate.

  - by Cyril Horad

  I have a problem with regards to my nVidia driver not running on 64-bit. I decided to install both 32-bit and 64-bit on my ASUS K42JC (4GB RAM upgrade) in order to function the nVidia on the 32-bit. My question is, how could I make my laptop run on either 32-bit or 64-bit OS. What options I am suppose to use, a single, double, or triple partition? From an answer: Well. When I installed the nVidia driver from either the ASUS site and the prescribed driver from NVIDA site via System Requirements Lab, both ended up freezing my laptop to the point when the desktop is about the finish booting. I have tried three(3) times reformatting and trying to fix the problem. Yet no use. I filed a ticket to the Asus support but for now no replies yet. But this bothers me, why wouldn't the nVidia run on 64bit yet it runs perfectly on 32bit.

  Read the article

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Where can I configure wireless to be passed on to the Virtualbox guest?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

• Video problem with Windows 7 Games

  - by Jordan 1GT

  I have a Dell xps M1330 which originally ran Vista, but I upgraded to Windows 7. When I try to run a Win 7 game like spider solitaire I receive the following message: "The game is running in software rendering mode. Hardware acceleration is either disabled or not supported by your video card driver which could slow down game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on." I confirmed that hardware acceleration is turned on. When I go to Dell's site, I'm told there is no later video driver. When I run the game it runs very choppy. I wouldn't care, but I loaded a .pptx file which is doing strange things in normal view and I suspect may be related to the same video problem. Any ideas?

  Read the article

• Ubuntu/Linux version recommendation for HP dv6 3122TX?

  - by sanjayav

  I purchased a HP dv6 3122TX recently and after installing Ubuntu 10.10 64 bit I ran into multiple issues like, The wireless driver is not supported by Uubntu. (1) [The driver is RaLink RT3090 ] The ethernet stopped working sometimes for no reason [The driver is Realtek RTL8111/8168B ] "Corrupted low memory at ..." issue which is described as a kernel bug in Ubuntu support forums. (It started to take me to a terminal instead of the GUI and couldn't start x server after that) As I'm not an expert Ubuntu user I got fed up of all these issue and got back to Windows 7. But I need an Ubuntu installation up and running for my development work. What are your suggestions about a reasonable Ubuntu version that I should try? Or a different Linux variation? Should I stick to a 32-bit version? It'd be great anyone can give some advice on this issue.

  Read the article

• Using unsigned drivers in Windows 8

  - by T. Fabre

  I just migrated from Windows 7 x64 to 8, but I can't get my VPN software to run anymore : the SafeNet IKE service (installed by SafeNet SoftRemoteLT GA, used by my VPN provider) cannot start anymore. I found that by default unsigned drivers are disabled on Win8, and that is what is blocking the driver. The System event log tells me that the driver (apparently, C:\WINDOWS\SysWow64\Drivers\IPSECDRV.sys ) was blocked when I try to manually start the service (SafeNet IKE Service). I get the same messages for another driver, crypto.sys found in the same folder. I tried using bcdedit to enable unsigned drivers : bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit /set testsigning ON After reboot, same error. I tried by booting into Win 8's test mode, same issue. Applying the code signing policy (Enabled, Ignore) does not help either. Running gpresult does show that the policy is applied. Any help welcome.

  Read the article

• Macbook Drivers for Windows 7

  - by Kaan

  I have a hard drive which I removed from my HP Laptop and plugged into my Macbook. Windows 7 started well and then installed graphic driver but the others (sound, touchpad) were not recognized by the operating system. What should I do? Edit from OP Sorry for writing here. I don't know why but my account is not associated with this post. First, I have Tiger CD but problem is neigher my Macbook, nor my Desktop PC can read the CD. I have downloaded Driver's from Apple (http://support.apple.com/kb/DL74) but it's not working. I mean, when I double click the exe file, It gets listed in process list int task manager but after 5 seconds, I disappears. But somehow, Windows recognized my audio device and installed its driver. Microphone is ok but red light is on.

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• How to solve ATI Radeon 7670M/ Intel HD Switchable Graphics recurring BSOD error?

  - by Ashin Mandal

  I recently bought a VAIO E Series laptop with an ATI Radeon 7670M and Intel HD Switchable Graphics. Around about one month ago, my computer started shutting down with atikmpag.sys blue screen error and the frequency of the errors kept on increasing with time. I am really worried about my VGA Adapter and whether or not it's gone bad. It's a 3 month old laptop! I searched on Google about atikmpag.sys BSOD and most of them suggested that my driver probably needs to be updated. I searched the Sony website and also the ATI website, I did have the latest drivers installed. Yet, I uninstalled the driver and installed it back again. But blue screens just keep coming back again and again. It generally happens more frequently when I have a video running and have paused it to do something else. I hope it's a driver issue!

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >