Search Results

Search found 1910 results on 77 pages for 'driving directions'.

Page 69/77 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• Job queue manager with RPC interface

  - by admr

  I need a job queue manager that I can control over the Internet. It should be able to execute and stop processes, check on their status (ideally notice and execute some code when a process exits), respond to commands and also be able to report back to a server. Background: I have a GWT application that allows to create jobs to execute on a cloud instance (currently EC2). I want to push a "job packet" (data for a process to operate on etc) to S3, start a Linux EC2 instance (or use one that's already running), and tell a job manager on the instance to execute that job (possibly parallel to other jobs). It should then pull the "job packet" from S3, run a process that operates on that data and report back to the server that is running the server part of my GWT application with some information (e.g. exit code, stdout, stderr). If I have to write e.g. stdour/err to a file from the process and read that file, that's OK too. I would really like the manager to be "close" to the processes it runs, meaning I want to avoid using something like Runtime.exec from the JDK. It seems like I would have to do that if I used Quartz for example. I'm fine with the calls in both directions being asynchronous. I'm fine with any reasonable technology for the calls as long as I can easily build an interface for that in my GWT server side (e.g. HTTP requests to a servlet over SSL would be nice and trivial). The job manager does not need to have a very sophisticated queueing system. Running several processes either sequentially or in parallel should be fine. Determining how much compute time a process received during its lifetime would be nice (AFAIK, this might be challenging). I did not yet find any existing software that does this, including http://java-source.net/open-source/job-schedulers. I suspect I might have to build an RPC interface (with authentication etc, of course) around a job manager; maybe use something like Apache Commons Exec. In that case, I would prefer Java or Python for the job manager part. I would be happy to hear suggestions for either the former or latter scenario!

  Read the article

• response.redirect to classic asp failing {Unable to evaluate expression because the code is optimize

  - by jeff

  I have the following code pasted below. For some reason, the response.redirect seems to be failing and it is maxing out the cpu on my server and just doesn't do anything. The .net code uploads the file fine, but does not redirect to the asp page to do the processing. I know this is absolute rubbish why would you have .net code redirecting to classic asp, it is a legacy app. I have tried putting false or true etc. at the end of the redirect as I have read other people have had issues with this. Please help as it's driving me insane! It's so strange, it runs locally on my machine but won't run on my server! I am getting the following error when I debugged remotely. {Unable to evaluate expression because the code is optimized or a native frame is on top of the call stack.} (UPDATED) After debugging remotely and taking the redirect out of the try catch, I have found that the redirect is trying to get to the correct location but after it leaves the redirect is just seems to get lost. (almost as if it can't navigate away from the cobra_import project) back up a level to COBRA/pages. Why is this??? This has worked previously!!! public void btnUploadTheFile_Click(object Source, EventArgs evArgs) { //need to check that the uploaded file is an xls file. string strFileNameOnServer = "PJI3.txt"; string strBaseLocation = ConfigurationSettings.AppSettings["str_file_location"]; if ("" == strFileNameOnServer) { txtOutput.InnerHtml = "Error - a file name must be specified."; return; } if (null != uplTheFile.PostedFile) { try { uplTheFile.PostedFile.SaveAs(strBaseLocation+strFileNameOnServer); txtOutput.InnerHtml = "File <b>" + strBaseLocation+strFileNameOnServer+"</b> uploaded successfully"; Response.Redirect ("/COBRA/pages/sap_import_pji3_prc.asp"); } catch (Exception e) { txtOutput.InnerHtml = "Error saving <b>" + strBaseLocation+strFileNameOnServer+"</b><br>"+ e.ToString(); } } }

  Read the article

• Many-To-Many Query with Linq-To-NHibernate

  - by rjygraham

  Ok guys (and gals), this one has been driving me nuts all night and I'm turning to your collective wisdom for help. I'm using Fluent Nhibernate and Linq-To-NHibernate as my data access story and I have the following simplified DB structure: CREATE TABLE [dbo].[Classes]( [Id] [bigint] IDENTITY(1,1) NOT NULL, [Name] [nvarchar](100) NOT NULL, [StartDate] [datetime2](7) NOT NULL, [EndDate] [datetime2](7) NOT NULL, CONSTRAINT [PK_Classes] PRIMARY KEY CLUSTERED ( [Id] ASC ) CREATE TABLE [dbo].[Sections]( [Id] [bigint] IDENTITY(1,1) NOT NULL, [ClassId] [bigint] NOT NULL, [InternalCode] [varchar](10) NOT NULL, CONSTRAINT [PK_Sections] PRIMARY KEY CLUSTERED ( [Id] ASC ) CREATE TABLE [dbo].[SectionStudents]( [SectionId] [bigint] NOT NULL, [UserId] [uniqueidentifier] NOT NULL, CONSTRAINT [PK_SectionStudents] PRIMARY KEY CLUSTERED ( [SectionId] ASC, [UserId] ASC ) CREATE TABLE [dbo].[aspnet_Users]( [ApplicationId] [uniqueidentifier] NOT NULL, [UserId] [uniqueidentifier] NOT NULL, [UserName] [nvarchar](256) NOT NULL, [LoweredUserName] [nvarchar](256) NOT NULL, [MobileAlias] [nvarchar](16) NULL, [IsAnonymous] [bit] NOT NULL, [LastActivityDate] [datetime] NOT NULL, PRIMARY KEY NONCLUSTERED ( [UserId] ASC ) I omitted the foreign keys for brevity, but essentially this boils down to: A Class can have many Sections. A Section can belong to only 1 Class but can have many Students. A Student (aspnet_Users) can belong to many Sections. I've setup the corresponding Model classes and Fluent NHibernate Mapping classes, all that is working fine. Here's where I'm getting stuck. I need to write a query which will return the sections a student is enrolled in based on the student's UserId and the dates of the class. Here's what I've tried so far: 1. var sections = (from s in this.Session.Linq<Sections>() where s.Class.StartDate <= DateTime.UtcNow && s.Class.EndDate > DateTime.UtcNow && s.Students.First(f => f.UserId == userId) != null select s); 2. var sections = (from s in this.Session.Linq<Sections>() where s.Class.StartDate <= DateTime.UtcNow && s.Class.EndDate > DateTime.UtcNow && s.Students.Where(w => w.UserId == userId).FirstOrDefault().Id == userId select s); Obviously, 2 above will fail miserably if there are no students matching userId for classes the current date between it's start and end dates...but I just wanted to try. The filters for the Class StartDate and EndDate work fine, but the many-to-many relation with Students is proving to be difficult. Everytime I try running the query I get an ArgumentNullException with the message: Value cannot be null. Parameter name: session I've considered going down the path of making the SectionStudents relation a Model class with a reference to Section and a reference to Student instead of a many-to-many. I'd like to avoid that if I can, and I'm not even sure it would work that way. Thanks in advance to anyone who can help. Ryan

  Read the article

• WCF facility : Metadata publishing for this service is currently disabled

  - by cvista

  I asked this before and got no where so i'm asking again as i'm now desperate!! Hey if i create a new wcf project i can browse the meta instantly. if I try - when using the WCF facility - i get the following: Metadata publishing for this service is currently disabled. i followed the instructions there and in a million other places and get no where. if i copy the contents of my faciltity service into the newly created project it complains that aspNetCompatibilityEnabled isnt enabled. so i enable it and then mex is disabled again and i get: Metadata publishing for this service is currently disabled. again!! this is driving me crazy - i have tried tried tried to follow every example on the web!! here is my current configuration - there is no client yet: <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <services> <service name="IbzStar.WebServices.UserServices" behaviorConfiguration="ServiceBehavior"> <!-- Service Endpoints --> <endpoint address="" binding="wsHttpBinding" contract="IbzStar.WebServices.IUserServices"> <!-- Upon deployment, the following identity element should be removed or replaced to reflect the identity under which the deployed service runs. If removed, WCF will infer an appropriate identity automatically. --> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> please someone help me out before my laptop gets launched into orbit!! w://

  Read the article

• a4j:support within a rich:modalPanel

  - by Andy Deighton

  Hi all, I've hit a wall. I know the a4j and rich tags pretty well (I use Seam 2.2.0 and Richfaces 3.3.1). However, I'm trying to do something quite simple, but in a rich:modalPanel. It seems that rich:modalPanels do not allow Ajax events to be fired. Here's a simple breakdown: I have a h:selectOneMenu with some items in it and whose value is attached to a backing bean. Attached to that h:selectOneMenu is a a4j:support tag so that whenever the change event is fired, the backing bean should get updated. Truly simple stuff eh? However, when this h:selectOneMenu is in a rich:modalPanel the onchange event doesn't update the backing bean until the rich:modalPanel closes. I can confirm this because I'm running it in Eclipse debug mode and I have a breakpoint on the setter of the property that's hooked up to the h:selectOneMenu. This is driving me mad! This is vanilla stuff for Ajax, but rich:modalPanels don't seem to allow it. So, the question is: can I do Ajax stuff within a rich:modalPanel? I'm basically trying to use the rich:modalPanel as a form (I've tried a4j:form and h:form to no avail) that reacts to changes to the drop down (e.g. when the user changes the drop down, a certain part of the form should get reRendered). Am I trying to do something that's not possible? Here's a simplified version of the modalPanel: <rich:modalPanel id="quickAddPanel"> <div> <a4j:form id="quickAddPaymentForm" ajaxSubmit="true"> <s:decorate id="paymentTypeDecorator"> <a4j:region> <h:selectOneMenu id="paymentType" required="true" value="#{backingBean.paymentType}" tabindex="1"> <s:selectItems label="#{type.description}" noSelectionLabel="Please select..." value="#{incomingPaymentTypes}" var="type"/> <s:convertEnum/> <a4j:support ajaxSingle="true" event="onchange" eventsQueue="paymentQueue" immediate="true" limitToList="true" reRender="paymentTypeDecorator, paymentDetailsOutputPanel, quickAddPaymentForm"/> </h:selectOneMenu> </a4j:region> </s:decorate> </fieldset> <fieldset class="standard-form"> <div class="form-title">Payment details</div> <a4j:outputPanel id="paymentDetailsOutputPanel"> <h:outputText value="This should change whenever dropdown changes: #{backingBean.paymentType}"/> </a4j:outputPanel> </fieldset> </a4j:form> </div> </rich:modalPanel> Regards, Andy

  Read the article

• Classes to Entities; Like-class inheritence problems

  - by Stacey

  Beyond work, some friends and I are trying to build a game of sorts; The way we structure some of it works pretty well for a normal object oriented approach, but as most developers will attest this does not always translate itself well into a database persistent approach. This is not the absolute layout of what we have, it is just a sample model given for sake of representation. The whole project is being done in C# 4.0, and we have every intention of using Entity Framework 4.0 (unless Fluent nHibernate can really offer us something we outright cannot do in EF). One of the problems we keep running across is inheriting things in database models. Using the Entity Framework designer, I can draw the same code I have below; but I'm sure it is pretty obvious that it doesn't work like it is expected to. To clarify a little bit; 'Items' have bonuses, which can be of anything. Therefore, every part of the game must derive from something similar so that no matter what is 'changed' it is all at a basic enough level to be hooked into. Sounds fairly simple and straightforward, right? So then, we inherit everything that pertains to the game from 'Unit'. Weights, Measures, Random (think like dice, maybe?), and there will be other such entities. Some of them are similar, but in code they will each react differently. We're having a really big problem with abstracting this kind of thing into a database model. Without 'Enum' support, it is proving difficult to translate into multiple tables that still share a common listing. One solution we've depicted is to use a 'key ring' type approach, where everything that attaches to a character is stored on a 'Ring' with a 'Key', where each Key has a Value that represents a type. This works functionally but we've discovered it becomes very sluggish and performs poorly. We also dislike this approach because it begins to feel as if everything is 'dumped' into one class; which makes management and logical structure difficult to adhere to. I was hoping someone else might have some ideas on what I could do with this problem. It's really driving me up the wall; To summarize; the goal is to build a type (Unit) that can be used as a base type (Table per Type) for generic reference across a relatively global scope, without having to dump everything into a single collection. I can use an Interface to determine actual behavior so that isn't too big of an issue. This is 'roughly' the same idea expressed in the Entity Framework.

  Read the article

• SVN: Branches for Every Little Change?

  - by yar

  Hi. We have a client (who has a client, who has a client) who is driving us mad with change requests to a code base (in PHP). Our first response was to just work in a main trunk in SVN, but the client often comes back and requests that a certain change needs to get pushed to the live servers ASAP. On the other hand, other changes get reduced in priority suddenly, which originally came grouped with other changes (seemingly). We are thinking of using a branch for every change request. Is this mad? What other solutions might work? Thanks! Edit: This is a really hard question to choose the correct answer for. Thanks to everybody for your great answers. Edit: I know that the best answer I chose was not particularly popular. I too wanted to find a technical solution to this problem. But now I think that if the client wants software with features that can be deployed in a modular fashion... this problem should not be solved in our use of the version control system. It would have to be designed into the software. Edit: Now it's almost a month later and my coworker/client has convinced me that multiple branches is the way to go. This is not just due to the client's insanity, but also based on our need to be able to determine if a feature is "ready to go" or "needs more work" or whatever. I don't have the SVN with me, but we merge using the advice from the SVN Cookbook: you merge the branch from the revision it was branched to the head revision. Also, using this system, we merge all branches at some point and that becomes the new QA and then live build. Then we branch from that. Last Edit (Perhaps): Months later, this system is still working out for us. We create branches for every ticket and rarely have problems. On the other hand, we do try to keep things separate as far as what people are working on... Two Years Later: We use GIT now, and now this system is actually quite reasonable.

  Read the article

• Cannot interact with checkbox in FireFox or Chrome. Works in IE.

  - by Darxide

  Title says it all. Here's the code: <div id="regpage"> <form action="" method="post"> <fieldset style="border:none;"> <div class="label">Username:</div> <input type="text" name="username" class="item" value="" /><br /> <div class="caption">Must be 5-15 characters</div><br /> <div style="clear:both;"></div> <div class="label">Password:</div> <input type="password" name="password" class="item" value="" /><br /> <div class="caption">Must be 6-20 characters</div><br /> <div style="clear:both;"></div> <div class="label">Email:</div> <input type="text" name="email" class="item" value="" /><br /> <div class="caption">Valid email address is required</div><br /> <div style="clear:both;"></div> <input name="terms" type="checkbox" id="terms" value="agree" /><div class="caption2"><label for="terms">I agree to the terms and conditions</label></div> <p><input type="submit" name="register" value="Register" id="register" style="float:left;border:1px solid #999;background:#E4E4E4;margin-top:5px;" /></p><br /> </fieldset> </form> </div> And the id "regpage" is definded in the style.css as: #regpage { width: 356px; height: 150px; color: #000000; font-family: "Tahoma", Arial, Helvetica, sans-serif; font-size: 13px; } If I move the checkbox OUT of it works just fine. But inside it will not interact in Mozilla. I've even tried adding onclick='this.checked="checked"' and it still does not interact. You can click until your blue in the face and nothing will happen. What's the deal! This is REALLY driving me batty.

  Read the article

• asp.net custom templated datalist - throws argument out of range (index) on button press

  - by MrTortoise

  I have a class BaseTemplate public abstract class BaseTemplate : ITemplate This adds the controls, and provides abstract methods to implement in the inheriting class. The inheriting class then adds its html according to its data source and manages the data binding. this all works fine - I get the control appearing with properly parsed html. the problem is that the base class adds controls into the template that have their own CommandName arguments ... the idea is that the class that implements the custom templated dataList will provide the logic of setting the Selected and Edit Indexes. This class also manages the data binding etc. It sets all of the templates ont he datalist in the Init method (which was another cause of this exception). the exception gets throw when i hit one of these buttons .. but after the ItemCommand event is being processed. The stack trace does not include any references to my methods or objects which is why i am so stuck. The Exception Details Exception Details: System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values. Parameter name: index The Stack Trace: [ArgumentOutOfRangeException: Specified argument was out of the range of valid values. Parameter name: index] System.Web.UI.ControlCollection.get_Item(Int32 index) +8665582 System.Web.UI.WebControls.DataList.GetItem(ListItemType itemType, Int32 repeatIndex) +8667655 System.Web.UI.WebControls.DataList.System.Web.UI.WebControls.IRepeatInfoUser.GetItemStyle(ListItemType itemType, Int32 repeatIndex) +11 System.Web.UI.WebControls.RepeatInfo.RenderVerticalRepeater(HtmlTextWriter writer, IRepeatInfoUser user, Style controlStyle, WebControl baseControl) +8640873 System.Web.UI.WebControls.RepeatInfo.RenderRepeater(HtmlTextWriter writer, IRepeatInfoUser user, Style controlStyle, WebControl baseControl) +27 System.Web.UI.WebControls.DataList.RenderContents(HtmlTextWriter writer) +208 System.Web.UI.WebControls.BaseDataList.Render(HtmlTextWriter writer) +30 System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27 System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99 System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +134 System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +19 System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +163 System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +32 System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +51 System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27 System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99 System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +40 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +134 System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +19 System.Web.UI.Page.Render(HtmlTextWriter writer) +29 System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27 System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99 System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1266 This is driving me absolutley stark raving bonkers ... im talking cthulu style.

  Read the article

• Need a fast programming language that can drive two printers

  - by Pete

  I have a rather unusual application that isn't working the way I need, and I hope someone here will have some suggestions or at least a direction to investigate. We have a museum exhibit that has a computer at the entrance driving two small receipt printers. There are two buttons on a console, wired to the left and right buttons of a disemboweled mouse. The two printers and associated buttons are for girls and boys, each button does a random selection from a database of names and prints a small ticket on the appropriate printer with a graphic image, a few words about the exhibit and the randomly chosen name. Conceptually all is well, but it hangs quite often. I got the project at the last minute, because the original designer got bogged down and couldn't deliver, so the exhibit's author asked me the day before opening, whether I could write something that would work. I did it in Word, since I am an experienced VBA programmer. Several other avenues I attempted first all lead to dead ends - one couldn't do graphics, another couldn't handle two printers, yet another couldn't change fonts and so on. The problem is that it simply isn't fast enough - Word can only drive one printer at a time and changing the active printer takes a long time. Not by office standards, where a second or two of delay before a printer starts working on your document is not an issue, but here I need more or less instant response. If kids press a button and nothing happens, they press it over and over until something does happen, resulting in maybe half a dozen commands being sent before the printer starts reacting. Sometimes it jams the program completely, since boys and girls will be pressing the two buttons simultaneously and Word locks up, and even when it doesn't jam, the printers then spit out a stream of tickets, making a mess. The kids start squabbling over which ticket is whose, pulling them out of the printers, snarling the paper tape, jamming the printer and generally making a mess of the whole affair, often necessitating the exhibit caretakers having to restart the computer and clear torn bits of paper out the printers. What I need is some sort of fast programming language that can drive two printers *-simultaneously-*, not the MSOffice claptrap of having to switch the active printer, that can react to both left and right mouse button click events, can print a small graphic image and can print in different font sizes and styles and. I don't need many, but it's not all in one typeface. Can anyone suggest what I might use for this? I don't even know if it's possible at all under Windows, whether the "single active printer" garbage is an Office artifact, or a Windows restriction. My little Commodore-64 twenty-five years ago had two printers attached to it and drove both simultaneously with no difficulties - it doesn't seem to me it should be such an impossible requirement today.

  Read the article

• MATLAB plot moving data points in seperate subplots simutaneously

  - by Nate B.

  I wish to visualize the movement of a data point throughout space across a period of time within MATLAB. However, the way I want my figure to display is such that only a single instant is plotted at any given time. That was easy, I simply created a for loop to update my 3D plot display for every set of coordinates (x,y,z) in my data. However, I wish to display 4 different viewing angles of this plot at all times. I am well aware of how to setup subplots within MATLAB, that is not the issue. My issue is getting all 4 of these subplots to execute simultaneously so that all 4 subplots are always displaying the same point in time. I would appreciate if anyone could suggest how to handle this issue. As requested, my code for a figure with a single plot is shown below: datan = DATA; %data in form of x,y,z,a,b,c by column for row# of time points tib=zeros(size(datan,1),12); tib(:,1:3) = datan(:,1:3); tib_ref=tib(1,1:3); for i=1:size(datan,1) tib(i,1:3)=tib(i,1:3)-tib_ref; end angle_to_dircos close all figure('Name','Directions (Individual Cycles)','NumberTitle','off') for cc=1:2 hold off for bb=1:10:size(tib,1); scatter3(tib(bb,1),tib(bb,2),tib(bb,3),'green','filled'); %z and y axes are flipped in polhemus system hold on p0 = [tib(bb,1),tib(bb,2),tib(bb,3)]; p1 = [tib(bb,1)+10*tib(bb,4),tib(bb,2)+10*tib(bb,5),tib(bb,3)+10*tib(bb,6)]; p2 = [tib(bb,1)+10*tib(bb,7),tib(bb,2)+10*tib(bb,8),tib(bb,3)+10*tib(bb,9)]; p3 = [-(tib(bb,1)+100*tib(bb,10)),-(tib(bb,2)+100*tib(bb,11)),-(tib(bb,3)+100*tib(bb,12))]; vectarrow(p0,p1,1,0,0) hold on vectarrow(p0,p2,0,1,0) hold on vectarrow(p0,p3,0,0,1) hold on az = 90; el = 0; view(az, el); xlim([-50,50]); ylim([-50,50]); zlim([-50,50]); xlabel('distance from center in X'); ylabel('distance from center in Y'); zlabel('distance from center in Z'); title('XYZ Scatter Plots of Tracker Position'); hold on plot3(0,0,0,'sk','markerfacecolor',[0,0,0]); p0 = [0,0,0]; p1 = [10,0,0]; p2 = [0,10,0]; p3 = [0,0,100]; vectarrow(p0,p1,1,0,0) hold on vectarrow(p0,p2,0,1,0) hold on vectarrow(p0,p3,1,0,1) drawnow; end end

  Read the article

• ASP.NET MVC 2: Linq to SQL entity w/ ForeignKey relationship and Default ModelBinder strangeness

  - by Simon

  Once again I'm having trouble with Linq to Sql and the MVC Model Binder. I have Linq to Sql generated classes, to illustrate them they look similar to this: public class Client { public int ClientID { get; set; } public string Name { get; set; } } public class Site { public int SiteID { get; set; } public string Name { get; set; } } public class User { public int UserID { get; set; } public string Name { get; set; } public int? ClientID { get; set; } public EntityRef<Client> Client { get; set; } public int? SiteID { get; set; } public EntityRef<Site> Site { get; set; } } The 'User' has a relationship with the 'Client' and 'Site . The User class has nullable ClientIDs and SiteIDs because the admin users are not bound to a Client or Site. Now I have a view where a user can edit a 'User' object, the view has fields for all the 'User' properties. When the form is submitted, the appropiate 'Save' action is called in my UserController: public ActionResult Save(User user, FormCollection form) { //form['SiteID'] == 1 //user.SiteID == 1 //form['ClientID'] == 1 //user.ClientID == null } The problem here is that the ClientID is never set, it is always null, even though the value is in the FormCollection. To figure out whats going wrong I set breakpoints for the ClientID and SiteID getters and setters in the Linq to Sql designer generated classes. I noticed the following: SiteID is being set, then ClientID is being set, but then the Client EntityRef property is being set with a null value which in turn is setting the ClientID to null too! I don't know why and what is trying to set the Client property, because the Site property setter is never beeing called, only the Client setter is being called. Manually setting the ClientID from the FormCollection like this: user.ClientID = int.Parse(form["ClientID"].ToString()); throws a 'ForeignKeyReferenceAlreadyHasValueException', because it was already set to null before. The only workaround I have found is to extend the generated partial User class with a custom method: Client = default(EntityRef<Client>) but this is not a satisfying solution. I don't think it should work like this? Please enlighten me someone. So far Linq to Sql is driving me crazy! Best regards

  Read the article

• How to handle environment-specific application configuration organization-wide?

  - by Stuart Lange

  Problem Your organization has many separate applications, some of which interact with each other (to form "systems"). You need to deploy these applications to separate environments to facilitate staged testing (for example, DEV, QA, UAT, PROD). A given application needs to be configured slightly differently in each environment (each environment has a separate database, for example). You want this re-configuration to be handled by some sort of automated mechanism so that your release managers don't have to manually configure each application every time it is deployed to a different environment. Desired Features I would like to design an organization-wide configuration solution with the following properties (ideally): Supports "one click" deployments (only the environment needs to be specified, and no manual re-configuration during/after deployment should be necessary). There should be a single "system of record" where a shared environment-dependent property is specified (such as a database connection string that is shared by many applications). Supports re-configuration of deployed applications (in the event that an environment-specific property needs to change), ideally without requiring a re-deployment of the application. Allows an application to be run on the same machine, but in different environments (run a PROD instance and a DEV instance simultaneously). Possible Solutions I see two basic directions in which a solution could go: Make all applications "environment aware". You would pass the environment name (DEV, QA, etc) at the command line to the app, and then the app is "smart" enough to figure out the environment-specific configuration values at run-time. The app could fetch the values from flat files deployed along with the app, or from a central configuration service. Applications are not "smart" as they are in #1, and simply fetch configuration by property name from config files deployed with the app. The values of these properties are injected into the config files at deploy-time by the install program/script. That install script takes the environment name and fetches all relevant configuration values from a central configuration service. Question How would/have you achieved a configuration solution that solves these problems and supports these desired features? Am I on target with the two possible solutions? Do you have a preference between those solutions? Also, please feel free to tell me that I'm thinking about the problem all wrong. Any feedback would be greatly appreciated.

  Read the article

• Perl - Calling subclass constructor from superclass (OO)

  - by Emmel

  This may turn out to be an embarrassingly stupid question, but better than potentially creating embarrassingly stupid code. :-) This is an OO design question, really. Let's say I have an object class 'Foos' that represents a set of dynamic configuration elements, which are obtained by querying a command on disk, 'mycrazyfoos -getconfig'. Let's say that there are two categories of behavior that I want 'Foos' objects to have: Existing ones: one is, query ones that exist in the command output I just mentioned (/usr/bin/mycrazyfoos -getconfig`. Make modifications to existing ones via shelling out commands. Create new ones that don't exist; new 'crazyfoos', using a complex set of /usr/bin/mycrazyfoos commands and parameters. Here I'm not really just querying, but actually running a bunch of system() commands. Affecting changes. Here's my class structure: Foos.pm package Foos, which has a new($hashref-{name = 'myfooname',) constructor that takes a 'crazyfoo NAME' and then queries the existence of that NAME to see if it already exists (by shelling out and running the mycrazyfoos command above). If that crazyfoo already exists, return a Foos::Existing object. Any changes to this object requires shelling out, running commands and getting confirmation that everything ran okay. If this is the way to go, then the new() constructor needs to have a test to see which subclass constructor to use (if that even makes sense in this context). Here are the subclasses: Foos/Existing.pm As mentioned above, this is for when a Foos object already exists. Foos/Pending.pm This is an object that will be created if, in the above, the 'crazyfoo NAME' doesn't actually exist. In this case, the new() constructor above will be checked for additional parameters, and it will go ahead and, when called using -create() shell out using system() and create a new object... possibly returning an 'Existing' one... OR As I type this out, I am realizing it is perhaps it's better to have a single: (an alternative arrangement) Foos class, that has a -new() that takes just a name -create() that takes additional creation parameters -delete(), -change() and other params that affect ones that exist; that will have to just be checked dynamically. So here we are, two main directions to go with this. I'm curious which would be the more intelligent way to go.

  Read the article

• Can't destroy record in many-to-many relationship

  - by Dmart

  I'm new to Rails, so I'm sure I've made a simple mistake. I've set up a many-to-many relationship between two models: User and Group. They're connected through the junction model GroupMember. Here are my models (removed irrelevant stuff): class User < ActiveRecord::Base has_many :group_members has_many :groups, :through => :group_members end class GroupMember < ActiveRecord::Base belongs_to :group belongs_to :user end class Group < ActiveRecord::Base has_many :group_members has_many :users, :through => :group_members end The table for GroupMembers contains additional information about the relationship, so I didn't use has_and_belongs_to_many (as per the Rails "Active Record Associations" guide). The problem I'm having is that I can't destroy a GroupMember. Here's the output from rails console: irb(main):006:0> m = GroupMember.new => #<GroupMember group_id: nil, user_id: nil, active: nil, created_at: nil, updated_at: nil> irb(main):007:0> m.group_id =1 => 1 irb(main):008:0> m.user_id = 16 => 16 irb(main):009:0> m.save => true irb(main):010:0> m.destroy NoMethodError: undefined method `eq' for nil:NilClass from /usr/local/lib/ruby/gems/1.8/gems/activesupport-3.0.4/lib/active_support/whiny_nil.rb:48:in `method_missing' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/persistence.rb:79:in `destroy' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/locking/optimistic.rb:110:in `destroy' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/callbacks.rb:260:in `destroy' from /usr/local/lib/ruby/gems/1.8/gems/activesupport-3.0.4/lib/active_support/callbacks.rb:413:in `_run_destroy_callbacks' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/callbacks.rb:260:in `destroy' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/transactions.rb:235:in `destroy' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/transactions.rb:292:in `with_transaction_returning_status' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/connection_adapters/abstract/database_statements.rb:139:in `transaction' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/transactions.rb:207:in `transaction' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/transactions.rb:290:in `with_transaction_returning_status' from /usr/local/lib/ruby/gems/1.8/gems/activerecord-3.0.4/lib/active_record/transactions.rb:235:in `destroy' from (irb):10 This is driving me crazy, so any help would be greatly appreciated.

  Read the article

• Xcode + Perforce: it frequently shows me the spinning wheel for no reason! What can i do?

  - by GamingHorror

  While working on an Xcode project i keep getting the spinning wheel while switching files, scrolling, searching, typing, debugging, removing breakpoints, switching back from another app or saving. It also happens before compiling but usually it just happens from time to time for no apparent reason. This is the second time this started happening in a Xcode project and it's driving me nuts. It completely breaks my flow of work to have to wait for the spinning wheel to go away (2-5 seconds). What on earth could i possibly do to ... figure out what's causing the problem? resolve the problem? More details: When any project is small, everything is super-smooth with Xcode and Perforce. Two of my projects eventually had this spinning wheel problem after about 4 weeks of work. It only happened with those two projects so far. They consist of around 1000-1200 files in source control, most of them assets. The problem occurs even if i manually check out the whole project in Perforce. The problem is gone when i copy the project directory and work in the copy which is no longer under source control, or if i create a branch in Perforce and work in the branch (under source control). One of these projects i shared with a colleague, and he had exactly the same issues on his Mac. We eventually switched to Subversion and the spinning-wheel issue immediately went away. Now that i've received an updated copy of the project and simply put it under Perforce as a new project, the problem also went away (so far it did not resurface). It leads me to think that it may be caused by a larger number of file revisions. The server itself (version 2009.1) is on a different (Windows) machine on my LAN, so there's definetely no Internet lag involved. The complete repository is just 1 GB in size spread over a dozen projects or so. I'm sorry if the question seems more like a support inquiry for Perforce. However i'm using the free version of Perforce so i'm not entitled to get support from them. I hope no one minds me asking here. I'm really bummed out by this. I don't want to have to create a new branch for the project each time the spinning wheel problem surfaces.

  Read the article

• App losing db connection

  - by DaveKub

  I'm having a weird issue with an old Delphi app losing it's database connection. Actually, I think it's losing something else that then makes the connection either drop or be unusable. The app is written in Delphi 6 and uses the Direct Oracle Access component (v4.0.7.1) to connect to an Oracle 9i database. The app runs as a service and periodically queries the db using a TOracleQuery object (qryAlarmList). The method that is called to do this looks like this: procedure TdmMain.RefreshAlarmList; begin try qryAlarmList.Execute; except on E: Exception do begin FStatus := ssError; EventLog.LogError(-1, 'TdmMain.RefreshAlarmList', 'Message: ' + E.Message); end; end; end; It had been running fine for years, until a couple of Perl scripts were added to this machine. These scripts run every 15 minutes and look for datafiles to import into the db, and then they do a some calculations and a bunch of reads/writes to/from the db. For some reason, when they are processing large amounts of data, and then the Delphi app tries to query the db, the Delphi app throws an exception at the "qryAlarmList.Execute" line in the above code listing. The exception is always: Access violation at address 00000000. read of address 00000000 HOW can something that the Perl scripts are doing cause this?? There are other Perl scripts on this machine that load data using the same modules and method calls and we didn't have problems. To make it even weirder, there are two other apps that will also suddenly lose their ability to talk to the database at the same time as the Perl stuff is running. Neither of those apps run on this machine, but both are Delphi 6 apps that use the same DOA component to connect to the same database. We have other apps that connect to the same db, written in Java or C# and they don't seem to have any problems. I've tried adding code before the '.Execute' method is called to: check the session's connection (session.CheckConnection(true); always comes back as 'ccOK'). see whether I can access a field of the qryAlarmList object to see if maybe it's become null; can access it fine. check the state of the qryAlarmList; always says it's qsIdle. Does anyone have any suggestions of something to try? This is driving me nuts! Dave

  Read the article

• Multiple word Auttosuggest using Lucene.Net

  - by eric

  I am currently working on an search application which uses Lucene.Net to index the data from the database to Index file. I have a product catalog which has Name, short and long description, sku and other fields. The data is stored in Index using StandardAnalyzer. I am trying to add auto suggestion for a text field and using TermEnum to get all the keyword terms and its score from the Index. But the terms returned are of single term. For example, if I type for co, the suggestion returned are costume, count, collection, cowboy, combination etc. But I want the suggestion to return phrases. For exmaple, if I search for co, the suggestions should be cowboy costume, costume for adults, combination locks etc. The following is the code used to get the suggestions: public string[] GetKeywords(string strSearchExp) { IndexReader rd = IndexReader.Open(mIndexLoc); TermEnum tenum = rd.Terms(new Term("Name", strSearchExp)); string[] strResult = new string[10]; int i = 0; Dictionary<string, double> KeywordList = new Dictionary<string, double>(); do { //terms = tenum.Term(); if (tenum.Term() != null) { //strResult[i] = terms.text.ToString(); KeywordList.Add(tenum.Term().text.ToString(), tenum.DocFreq()); } } while (tenum.Next() && tenum.Term().text.StartsWith(strSearchExp) && tenum.Term().text.Length > 1); var sortedDict = (from entry in KeywordList orderby entry.Value descending select entry); foreach (KeyValuePair<string, double> data in sortedDict) { if (data.Key.Length > 1) { strResult[i] = data.Key; i++; } if (i >= 10) //Exit the for Loop if the count exceeds 10 break; } tenum.Close(); rd.Close(); return strResult; } Can anyone please give me directions to achive this? Thanks for looking into this.

  Read the article

• Haskell type classes and type families (cont'd)

  - by Giuseppe Maggiore

  I need some help in figuring a compiler error which is really driving me nuts... I have the following type class: infixl 7 --> class Selectable a s b where type Res a s b :: * (-->) :: (CNum n) => (Reference s a) -> (n,(a->b),(a->b->a)) -> Res a s b which I instance twice. First time goes like a charm: instance Selectable a s b where type Res a s b = Reference s b (-->) (Reference get set) (_,read,write) = (Reference (\s -> let (v,s') = get s in (read v,s')) (\s -> \x -> let (v,s') = get s v' = write v x (_,s'') = set s' v' in (x,s''))) since the type checker infers (-->) :: Reference s a -> (n,a->b,a->b->a) -> Reference s b and this signature matches with the class signature for (--) since Res a s b = Reference s b Now I add a second instance and everything breaks: instance (Recursive a, Rec a ~ reca) => Selectable a s (Method reca b c) where type Res a s (Method reca b c) = b -> Reference s c (-->) (Reference get set) (_,read,write) = \(x :: b) -> from_constant( Constant(\(s :: s)-> let (v,s') = get s :: (a,s) m = read v ry = m x :: Reference (reca) c (y,v') = getter ry (cons v) :: (c,reca) v'' = elim v' (_,s'') = set s' v'' in (y,s''))) :: Reference s c the compiler complains that Couldn't match expected type `Res a s (Method reca b c)' against inferred type `b -> Reference s c' The lambda expression `\ (x :: b) -> ...' has one argument, which does not match its type In the expression: \ (x :: b) -> from_constant (Constant (\ (s :: s) -> let ... in ...)) :: Reference s c In the definition of `-->': --> (Reference get set) (_, read, write) = \ (x :: b) -> from_constant (Constant (\ (s :: s) -> ...)) :: Reference s c reading carefully the compiler is telling me that it has inferred the type of (--) thusly: (-->) :: Reference s a -> (n,a->(Method reca b c),a->(Method reca b c)->a) -> (b -> Reference s c) which is correct since Res a s (Method reca b c) = b -> Reference s c but why can't it match the two definitions? Sorry for not offering a more succint and standalone example, but in this case I cannot figure how to do it...

  Read the article

• How do we simplify this kind of code in Java? Something like macros in C?

  - by Terry Li

  public static boolean diagonals(char[][] b, int row, int col, int l) { int counter = 1; // because we start from the current position char charAtPosition = b[row][col]; int numRows = b.length; int numCols = b[0].length; int topleft = 0; int topright = 0; int bottomleft = 0; int bottomright = 0; for (int i=row-1,j=col-1;i>=0 && j>=0;i--,j--) { if (b[i][j]==charAtPosition) { topleft++; } else { break; } } for (int i=row-1,j=col+1;i>=0 && j<=numCols;i--,j++) { if (b[i][j]==charAtPosition) { topright++; } else { break; } } for (int i=row+1,j=col-1;i<=numRows && j>=0;i++,j--) { if (b[i][j]==charAtPosition) { bottomleft++; } else { break; } } for (int i=row+1,j=col+1;i<=numRows && j<=numCols;i++,j++) { if (b[i][j]==charAtPosition) { bottomright++; } else { break; } } return topleft + bottomright + 1 >= l || topright + bottomleft + 1 >= l; //in this case l is 5 } After I was done posting the code above here, I couldn't help but wanted to simplify the code by merging the four pretty much the same loops into one method. Here's the kind of method I want to have: public int countSteps(char horizontal, char vertical) { } Two parameters horizontal and vertical can be either + or - to indicate the four directions to walk in. What I want to see if possible at all is i++; is generalized to i horizontal horizontal; when horizontal taking the value of +. What I don't want to see is if or switch statements, for example: public int countSteps(char horizontal, char vertical) { if (horizontal == '+' && vertical == '-') { for (int i=row-1,j=col+1;i>=0 && j<=numCols;i--,j++) { if (b[i][j]==charAtPosition) { topright++; } else { break; } } } else if (horizontal == '+' && vertical == '+') { for (int i=row+1,j=col+1;i>=0 && j<=numCols;i++,j++) { if (b[i][j]==charAtPosition) { topright++; } else { break; } } } else if () { } else { } } Since it is as tedious as the original one. Note also that the comparing signs for the loop condition i>=0 && j<=numCols; for example, >= && <= have correspondence with the value combination of horizontal and vertical. Sorry for my bad wording, please let me know if anything is not clear.

  Read the article

• How to resize the UIView when CGAffineTransformIdentity

  - by Gowtham

  I am doing an app which has a feature to rotate and re size a view. i have implemented this feature but i do face an issue. My problem The View wil be resized when dragging its four corners, after resizing it i can rotate the view in both directions. Once the rotation is done, if i try again to resize the view by dragging its corner, the view's size gone to unpredictable value and its moving all around the screen. I googled lot finally i got the following solution The frame property is undefined when transform != CGAffineTransformIdentity, as per the docs on UIView I saw one app which has implemented the feature exactly what i wish to implement. How can i resize the UIView after rotation of UIView My code for resize the view Touches Began - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event{ UITouch *touch = [[event allTouches] anyObject]; NSLog(@"[touch view]:::%@",[touch view]); touchStart = [[touches anyObject] locationInView:testVw]; isResizingLR = (testVw.bounds.size.width - touchStart.x < kResizeThumbSize && testVw.bounds.size.height - touchStart.y < kResizeThumbSize); isResizingUL = (touchStart.x <kResizeThumbSize && touchStart.y <kResizeThumbSize); isResizingUR = (testVw.bounds.size.width-touchStart.x < kResizeThumbSize && touchStart.y<kResizeThumbSize); isResizingLL = (touchStart.x <kResizeThumbSize && testVw.bounds.size.height -touchStart.y <kResizeThumbSize); } Touches Moved - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event{ CGPoint touchPoint = [[touches anyObject] locationInView:testVw]; CGPoint previous=[[touches anyObject]previousLocationInView:testVw]; float deltaWidth = touchPoint.x-previous.x; float deltaHeight = touchPoint.y-previous.y; NSLog(@"CVTM:%@",NSStringFromCGRect(testVw.frame)); if (isResizingLR) { testVw.frame = CGRectMake(testVw.frame.origin.x, testVw.frame.origin.y,touchPoint.x + deltaWidth, touchPoint.y + deltaWidth); } if (isResizingUL) { testVw.frame = CGRectMake(testVw.frame.origin.x + deltaWidth, testVw.frame.origin.y + deltaHeight, testVw.frame.size.width - deltaWidth, testVw.frame.size.height - deltaHeight); } if (isResizingUR) { testVw.frame = CGRectMake(testVw.frame.origin.x ,testVw.frame.origin.y + deltaHeight, testVw.frame.size.width + deltaWidth, testVw.frame.size.height - deltaHeight); } if (isResizingLL) { testVw.frame = CGRectMake(testVw.frame.origin.x + deltaWidth ,testVw.frame.origin.y , testVw.frame.size.width - deltaWidth, testVw.frame.size.height + deltaHeight); } if (!isResizingUL && !isResizingLR && !isResizingUR && !isResizingLL) { testVw.center = CGPointMake(testVw.center.x + touchPoint.x - touchStart.x,testVw.center.y + touchPoint.y - touchStart.y); } }

  Read the article

• How to reconcile my support of open-source software and need to feed and house myself?

  - by Guzba

  I have a bit of a dilemma and wanted to get some other developers' opinions on it and maybe some guidance. So I have created a 2D game for Android from the ground up, learning and re factoring as I went along. I did it for the experience, and have been proud of the results. I released it for free as ad supported with AdMob not really expecting much out of it, but curious to see what would happen. Its been a few of months now since release, and it has become very popular (250k downloads!). Additionally, the ad revenue is great and is driving me to make more good games and even allowing me to work less so that I can focus on my own works. When I originally began working on the game, I was pretty new to concurrency and completely new to Android (had Java experience though). The standard advice I got for starting an Android game was to look at the sample games from Google (Snake, Lunar Lander, ...) so I did. In my opinion, these Android sample games from Google are decent to see in general what your code should look like, but not actually all that great to follow. This is because some of their features don't work (saving game state), the concurrency is both unexplained and cumbersome (there is no real separation between the game thread and the UI thread since they sync lock each other out all the time and the UI thread runs game thread code). This made it difficult for me as a newbie to concurrency to understand how it was organized and what was really running what code. Here is my dilemma: After spending this past few months slowly improving my code, I feel that it could be very beneficial to developers who are in the same position that I was in when I started. (Since it is not a complex game, but clearly coded in my opinion.) I want to open up the source so that others can learn from it but don't want to lose my ad revenue stream, which, if I did open the source, I fear I would when people released versions with the ad stripped, or minor tweaks that would fragment my audience, etc. I am a CS undergrad major in college and this money is giving me the freedom to work less at summer job, thus giving me the time and will to work on more of my own projects and improving my own skills while still paying the bills. So what do I do? Open the source at personal sacrifice for the greater good, or keep it closed and be a sort of hypocritical supporter of open source?

  Read the article

• Passing enums to functions in C++

  - by rocknroll

  Hi all, I have a header file with all the enums listed (#ifndef #define #endif construct has been used to avoid multiple inclusion of the file) that I use in multiple cpp files in my application.One of the enums in the files is enum StatusSubsystem {ENABLED,INCORRECT_FRAME,INVALID_DATA,DISABLED}; There are functions in the application delcared as ShowStatus(const StatusSubsystem&); Earlier in the application when I made calls to the above function like ShowStatus(INCORRECT_FRAME); my application used to compile perfectly. But after some code was added The compilation halts giving the following error: File.cpp:71: error: invalid conversion from `int' to `StatusSubsystem' File.cpp:71: error: initializing argument 1 of `void Class::ShowStatus(const StatusSubsystem&) I checked the code for any conflicting enums in the new code and it looked fine. My Question is what is wrong with the function call that compiler shows as erroneous? For your reference the function definition is: void Class::ShowStatus(const StatusSubsystem& eStatus) { QPalette palette; mStatus=eStatus;//store current Communication status of system if(eStatus==DISABLED) { //select red color for label, if it is to be shown disabled palette.setColor(QPalette::Window,QColor(Qt::red)); mLabel->setText("SYSTEM"); } else if(eStatus==ENABLED) { //select green color for label,if it is to be shown enabled palette.setColor(QPalette::Window,QColor(Qt::green)); mLabel->setText("SYSTEM"); } else if(eStatus==INCORRECT_FRAME) { //select yellow color for label,to show that it is sending incorrect frames palette.setColor(QPalette::Window,QColor(Qt::yellow)); mLabel->setText("SYSTEM(I)"); } //Set the color on the Label mLabel->setPalette(palette); } A strange side effect of this situation is it compiles when I cast all the calls to ShowStatus() as ShowStatus((StatusSubsystem)INCORRECT_FRAME); Though this removes any compilation error, but a strange thing happens. Though I make call to INCORRECT_FRAME above but in function definition it matches with ENABLED. How on earth is that possible? Its like while passing INCORRECT_FRAME by reference, it magically converts to ENABLED, which should be impossible. This is driving me nuts. Can you find any flaw in what I am doing? or is it something else? The application is made using C++,Qt-4.2.1 on RHEL4. Thanks.

  Read the article

• How should I smooth the transition between these two states in flex/flashbuilder

  - by Joshua

  I have an item in which has two states, best described as open and closed, and they look like this: and And what I'd like to do is is smooth the transition between one state and the other, effectively by interpolating between the two points in a smooth manner (sine) to move the footer/button-block and then fade in the pie chart. However this is apparently beyond me and after wrestling with my inability to do so for an hour+ I'm posting it here :D So my transition block looks as follows <s:transitions> <s:Transition id="TrayTrans" fromState="*" toState="*"> <s:Sequence> <s:Move duration="400" target="{footer}" interpolator="{Sine}"/> <s:Fade duration="300" targets="{body}"/> </s:Sequence> </s:Transition> <s:Transition> <s:Rotate duration="3000" /> </s:Transition> </s:transitions> where {body} refers to the pie chart and {footer} refers to the footer/button-block. However this doesn't work so I don't really know what to do... Additional information which may be beneficial: The body block is always of fixed height (perhaps of use for the Xby variables in some effects?). It needs to work in both directions. Oh and the Sine block is defined above in declarations just as <s:Sine id="Sine">. Additionally! How would I go about setting the pie chart to rotate continually using these transition blocks? (this would occur without the labels on) Or is that the wrong way to go about it as it's not a transition as such? The effect I'm after is one where the pie chart rotates slowly without labels prior to a selection of a button below, but on selection the rotation stops and labels appear... Thanks a lot in advance! And apologies on greyscale, but I can't really decide on a colour scheme. Any suggestions welcome.

  Read the article

• C++ stream as a parameter when overloading operator<<

  - by TheOm3ga

  I'm trying to write my own logging class and use it as a stream: logger L; L << "whatever" << std::endl; This is the code I started with: #include <iostream> using namespace std; class logger{ public: template <typename T> friend logger& operator <<(logger& log, const T& value); }; template <typename T> logger& operator <<(logger& log, T const & value) { // Here I'd output the values to a file and stdout, etc. cout << value; return log; } int main(int argc, char *argv[]) { logger L; L << "hello" << '\n' ; // This works L << "bye" << "alo" << endl; // This doesn't work return 0; } But I was getting an error when trying to compile, saying that there was no definition for operator<<: pruebaLog.cpp:31: error: no match for ‘operator<<’ in ‘operator<< [with T = char [4]](((logger&)((logger*)operator<< [with T = char [4]](((logger&)(& L)), ((const char (&)[4])"bye")))), ((const char (&)[4])"alo")) << std::endl’ So, I've been trying to overload operator<< to accept this kind of streams, but it's driving me mad. I don't know how to do it. I've been loking at, for instance, the definition of std::endl at the ostream header file and written a function with this header: logger& operator <<(logger& log, const basic_ostream<char,char_traits<char> >& (*s)(basic_ostream<char,char_traits<char> >&)) But no luck. I've tried the same using templates instead of directly using char, and also tried simply using "const ostream& os", and nothing. Another thing that bugs me is that, in the error output, the first argument for operator<< changes, sometimes it's a reference to a pointer, sometimes looks like a double reference...

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >