Search Results

Search found 2481 results on 100 pages for 'hp storageworks'.

Page 69/100 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

  • What's a good Linux distro for an older PC?

    - by jdamae
    I'm new to Linux and I am interested in installing it on an older computer I have. I want to set a web server up, and install PHP and Perl on it. My PC is an older HP Pavilion a255c, with an Intel Pentium 4 processor and 512 MB of RAM. I will probably add some more memory later. This PC is more like a sandbox than anything, but I would like to get started quickly with the OS. Is there a particular flavor of Linux I would need to download because I have an old computer? I was thinking about Ubuntu, but I'm not sure what version to go with.

    Read the article

  • Installing Intel Rapid Storage Drivers makes my eSATA Drives act weird

    - by Filip Ekberg
    I have a HP 8530w Elitebook this Laptop got an eSATA port which I want to plug my LaCie d2 Quadra V2 1TB harddrive into. It all works well on a fresh install of Windows 7 without the Intel Chipset drivers installed. However when I install the Intel Rapid Storage drivers or the Intel Matrix software my drive seems to "disconnect" when I use it to much. I have a lot of Virtual PC's on the drive and when I start them the disk somewhat disconnects. What could cause this?

    Read the article

  • Eee PC - Create USB Recovery Drive w/ Files Copied From Recovery Partition

    - by nedm
    I have an Eee PC 1005HAB whose hard disk has failed. I have no recovery CD/DVD, but I did previously back up the contents of the recovery partition, and would like to use them to create a bootable USB to reinstall the factory settings on the new hard drive. Since I simply copied all the files in the recovery partition, rather than hitting F9 during boot and running through the process to create a recovery disk or drive, how do I now use the files to create a bootable USB drive that will do the recovery? In the BIOS I have disabled boot booster and set external drives to the top of the boot priority, but simply copying all the recovery partion files to a usb doesn't allow it to be booted from. I've downloaded the HP utility for creating bootable USB drives and have tried using it to make the USB drive bootable, but I'm not sure what to do with the ghost image and utilities from the recovery partition to get the process to start properly. Thanks in advance for any help.

    Read the article

  • Ubuntu Server on Proliant ML350 G4

    - by eduardoavdr
    Hi Everyone, I have been given the task to change OS of a HP Proliant ML350 G4 server, and I decided to use Ubuntu server edition for that matter. The thing is that the server has already installed Windows server 2000 on the only Hard drive it has (SCSI). My question is, could I install an IDE HD on the IDE connection it has and install ubuntu without overwritting the boot configuration, so if I wanted to go back to the windows 2000 server installation with no problems? It also has a tape drive which is used for backups. Do you guys know how buntu deals with such devices? Thanks for your time

    Read the article

  • BackupExec 12 to Bacula questions

    - by LVDave
    We have a 128 node compute cluster for environmental modeling, with a master/head node which we currently backup with a Windows2003 system running BackupExec 12 and a single HP LTO3 tape drive. We have recently ordered an Overland NEO200s 12 slot library, and are considering migrating off Windows to CentOS 5 for the backup server. The master/head node is RHEL5, with the compute nodes currently being migrated from a mix of RHEL3/4/5 to CentOS5. I'm fairly familiar with RH/Centos, but have no experience with Bacula. We've tentatively settled on Bacula as our cluster vendor recommended it. My questions are: 1) Does Bacula support an Overland NEO200s/LTO3 library? 2) Can Bacula catalog/restore tapes written by BE? and 3) I've head of Amanda, but am even more unfamiliar with it than Bacula. Any assistance would be appreciated Dave Frandin

    Read the article

  • Slow NFS transfer performance of small files

    - by Arie K
    I'm using Openfiler 2.3 on an HP ML370 G5, Smart Array P400, SAS disks combined using RAID 1+0. I set up an NFS share from ext3 partition using Openfiler's web based configuration, and I succeeded to mount the share from another host. Both host are connected using dedicated gigabit link. Simple benchmark using dd: $ dd if=/dev/zero of=outfile bs=1000 count=2000000 2000000+0 records in 2000000+0 records out 2000000000 bytes (2.0 GB) copied, 34.4737 s, 58.0 MB/s I see it can achieve moderate transfer speed (58.0 MB/s). But if I copy a directory containing many small files (.php and .jpg, around 1-4 kB per file) of total size ~300 MB, the cp process ends in about 10 minutes. Is NFS not suitable for small file transfer like above case? Or is there some parameters that must be adjusted?

    Read the article

  • Issues with partitions WIN 7

    - by pomber
    I was trying to make some space to install linux in my HP notebook. The computer had 4 partitions, I made space shrinking one and created a new one (facepalm) using the windows partitioning tool. It show me some warning message saying something about dynamic partitions, I ingored it, and went to the linux live CD. I installed linux in the new partition, after the installation completed it told me that GRUB cannot be installed I dont remember why. So now, it doesnt boot, neither windows nor linux. After google for a while I found the diskpart command, it gives me this info: DISKPART> list disk DISK ### Status -------- --------------- DISK 0 Invalid DISKPART> select disk 0 DISKPART> select partition Partition ### TYPE ------------- -------------- Partition 1 Dynamic Data Partition 2 Dynamic Data Partition 3 Dynamic Data Partition 4 Primary <- I think I put linux here Any idea whats happening? Or how to solve it? Thanks

    Read the article

  • Wireshark (WinPCap) does not see Intel X520-DA2 10 GbE NIC teaming intermittently

    - by GregC
    I am running a team of two 10 GigE ports on Intel X520-DA2 network card. They work well in tandem and achieve the desired throughput. However, I see an intermittent issue whereby WireShark and my own application (using WinPCap) only show the underlying ports, failing to recognize the team adapter. Details: Intel 17.4 NIC drivers on Windows Server 2008 R2 with all patches. HP DL370 G6 server. RSS enabled on Intel both underlying Intel NICs. The exact error: Unable to open the adapter (rpcap://\Device\NPF_{401D5903-16E7-41DC-8484-5D96765B9692}). failed to set hardware filter to promiscuous mode

    Read the article

  • Clone remote CentOS server to local test server?

    - by dannymcc
    We have a dedicated server running ContOS 5.5. The server runs our Magento store and a basic php website with mysql. I have a spare rack server in my office (HP ProLiant DL360 G4) that has more than enough storage space to store a duplicate of our dedicated server. I would like to clone the dedicated server entirely and have a local duplicate. It wouldn't need to be kept in sync because I can do that with GIT. The reason I want to do this is simple; learn more about the dedicated server and CentOS. Is this possible? I have SSH access to the dedicated server and obviously complete access to the local server.

    Read the article

  • Word 2010 not printing body text on pages with images

    - by Oesor
    I've got a document exhibiting bizarre behavior -- when I print, the body text style is only displayed on pages without images. Headings, header and footer, and captions are printing on the page, along with any graphics such as border styles applied to the style, but the text itself doesn't print -- except for en dashes. The text is pretty basic -- a justified Calibri style. Images are their own style, a centered paragraph item. There's no floating image boxes or text boxes going on, everything's a paragraph style. It's not a print driver issue. I get identical behavior on both a HP and Brother laser printer. It's also not a paragraph-level style issue; I've inserted enough dummy text to move a printing paragraph on a page with no images to the next page, which has an image, and the paragraph does not print on the next page. Has anyone run into an issue like this and knows the solution?

    Read the article

  • I split partition in Windows 7 home edition but the Windows doesn't reboot

    - by Samnan
    I Have Geniune Windows 7 home edition and my Laptop is Pavilion HP DV6 . I had only 1 partition of 500+ GB i Wanted to make another partition. I read somewhere in forum that I have to make my C: logical and then I'd be able to split C: I did the same thing using Partition Wizard. I made C: of 125 GB and shift rest of the space in New drive. I made a bootable disk, performed all the task using partition Wizard After that I have not been able to boot my windows. Even after running system restore several times.

    Read the article

  • Question regarding an NAS server and remote users

    - by JB
    I have a client that requires a massive amount of storage space but: Doesn't want to spend very much money Needs remote users (across the country) to be able to pull data from it and store to it, as well. Can this be done with an NAS Server such as the Western Digital Sharespace Network Storage System? I do not believe the client wants to spend over $1400 and HP is offering 8TB for $1299. Also, if anyone has any other ideas besides using NAS, please let me know. Thanks in advance for any help.

    Read the article

  • How can I dual boot a UEFI OS and a legacy boot OS, or convert stock Windows 8 to BIOS?

    - by The Great Widi
    I have a computer (HP Pavilion g6-2342dx) which came with Windows 8, and thus the new UEFI boot system. I would like to install a few OS's which are not EFI compatible, and Arch GNU/Linux with BIOS mode. However, I would not like to completely wipe all my files to set to legacy. My preferred options would be to: 1. Multiboot legacy OS alongside my EFI os 2. Convert Windows 8 and Ubuntu to legacy without reformatting or switching to MSDOS part table. If anyone could suggest a solution or a method, your help would be appreciated! Thanks!

    Read the article

  • Disable Memory Modules In BIOS for Testing Purposes (Optimize Nehalem/Gulftown Memory Performance)

    - by Bob
    I recently acquired an HP Z800 with two Intel Xeon X5650 (Gulftown) 6 core processors. The person that configured the system chose 16GB (8 x 2GB DDR3-1333). I'm assuming this person was unaware these processors have 3 memory channels and to optimize memory performance one should choose memory in multiples of three. Based on this information, I have a question: By entering the BIOS, can I disable the bank on each processor that has the single memory module? If so, will this have any adverse effects or behave differently than physically removing the modules? I ask due to the fact that I prefer to store the extra memory in the system if it truly behaves as if the memory is not even there. Also, I see this as an opportunity to test 12GB vs. 16GB to see if there is a noticeable difference. Note: According to http://www.delltechcenter.com/page/04-08-2009+-+Nehalem+and+Memory+Configurations?t=anon, the current configuration reduces the overall data transfer speed to 1066 and in addition, the memory bandwidth goes down by about 23%.

    Read the article

  • Computer won't recognize second WD internal HD

    - by music man
    I installed a Western Digital Caviar Green 1TB internal hard drive, and want to use it for back up. My BIOS recognizes the device, but it is not recognized in Disk Management. It also is not recognized in "my computer." When I right-click my C drivepropertieshardware, I see it listed. First the drive was plugged into SATA port 1 on my motherboard, then I tried it in port 3, where it remains. I've been working on this for hours. Any help would be appreciated. More info Hard drive model #:WD10EADS-65M2B1 Windows 7 Home Premium 64 bit Service Pack 1 Computer:HP Model p6404y, Processor:AMD phenom II x4 820 2.80GHZ 8 gigs RAM

    Read the article

  • Merit and demerits for various Linux fiberchannel multipath options

    - by wzzrd
    On our Linux servers, we currently use HPs qla2xxx drivers, because it has multipathing (active/passive) built in. The are, however, various other options, like Red Hats device-mapper-multipath with the stock qla2xxx drivers (multibus and failover) and things like SecurePath and PowerPath (both of which can do trunking, iirc). Can someone tell me what the merits and demerits of the various options are (if I can ask such a question), besides the obvious fact that the {Secure,Power}Path options cost vast amounts of money? I'm mainly interested in the freely available options, like HPs qla2xxx vs. Red Hats multipathd and possible other open source solutions, but I would like to hear good reasons to go for the commercial solutions too. UPDATE: I'll be benchmarking various options the coming few days (the average of 10 runs of iozone for each option (options being native qla2xxx failver, native qla2xxx multibus, HP qla2xxx failover)). I'll post a summary of results here for those interested.

    Read the article

  • Server vendor that allows 3rd party disks

    - by Alvin S
    As noted here, Dell is no longer allowing 3rd party disks to be used with their latest servers. As in, they don't work period. Which means that if you buy one of these boxes and want to upgrade the storage later, you have buy disks from Dell at significant premiums. Dell has just given me a very strong reason to take my server business elsewhere. My company buys (instead of leasing) our servers, and typically uses them for 5 years. I need to be able to upgrade/repurpose storage periodically, and do not want to be locked in to whatever Dell might have in stock, at inflated prices to boot. As you will see in the comments of the above link, it seems HP is doing the same thing. I am looking for a server vendor that offers 3-5 year warranty with same day/next day onsite service, and allows me to use 3rd party disks. Suggestions?

    Read the article

  • Nested RDP and ILO/VMWare console sessions, latency and keystroke repetition

    - by ewwhite
    I'm working on a remote server installation entirely through ILO. Due to the software application and environment, my access is restricted to a Windows server that I must access through RDP. Going from that system to the target server is accomplished via HP ILO2 or ILO3. I'm trying to run a CentOS installation in an environment where I can't use a kickstart. I'm doing this via text mode, but the keystrokes are repeating randomly and it's difficult to select the proper installation options. For example: ks=http://all.yourbase.org/kickstart/ks.cfg ends up looking like: ks====httttttp://allll..yourbaseee.....org/kicksstart/ks.cccfg I'm doing this using Microsoft's native RDP client (on Mac and Windows). I've also noticed this before when running installations or doing remote work in nested sessions. Same for typing into a VMWare console in some cases. Is there a nice fix for this, or it it simply a function of the protocol(s)?

    Read the article

  • Forcing logon to Air Watch server upon joining wifi

    - by DKNUCKLES
    I'm setting up a wireless controller that I would like to leave as unsecured. When a user connects to this network they need to be forwarded to a specific page where they can authenticate with the Air Watch system they have in place. Once authentication takes place, a profile will be downloaded to their device and we can administer the devices accordingly. I'm mulling over how I can force the page to the user when they log in. The methodology I'm thinking about working with is creating a NAT rule for that VSC that would forward all port 80 and 443 traffic to the airwatch server. Once they authenticate, a profile will be downloaded which will connect the devices to an Virtual Access Point who's SSID isn't broadcasted. Is this methodology correct or can someone think of an easier / more efficient way of accomplishing this? The controller is an HP MSM720 for what it's worth.

    Read the article

  • Ultrium 3 tape drive shoe-shining, 3Mb/s: and it's not the cable

    - by mowsala
    I have a HP 960 Ultrium 3 tape drive. Since I got it, (second hand, £90) I've been experiencing shoe-shining. Writing with tar in Linux, I average about 3Mb/s write speed. I've tried replacing both the SCSI card and the cable now, both of which made no difference at all. A curiuos observation I have made is that the write rate is not consistent. Sometimes it will write for over a minute without shoeshining, but more often, just a few seconds. I've also tried several tapes, different source drives, and even writing from Windows Backup, to no avail.

    Read the article

  • How to grow from single server setup

    - by Jenkz
    I'm looking for resources on how to grow our server setup. We currently have one dedicated server with Rackspace in the UK of the following spec: HPDL385_G2_PrevGen HP Single Dual Core Opteron 2214 (2.2Ghz) 4GB RAM 2x 10,000 SCSI Drives in RAID 1 Our traffic is up to 550,000 UVs per month. The site runs off a PHP and MySQL setup. The database gets an absolute hammering, we have many complex queries joining multilpe tables. We are using APC for PHP caching. I'm getting to the stage where I've done as much DB and query optimisation as I can and wonder what the next step should be...... I've looked at memcache, but I've got the impression that his requires a large amount of RAM and ideally a dedicated box.... So is the next step to have two boxes; one for database, one for Apache? Or is there a step I've overlooked. Our load is usually around the 2 mark, but right now it's up at 20!

    Read the article

  • How to grow from single server setup

    - by Jenkz
    I'm looking for resources on how to grow our server setup. We currently have one dedicated server with Rackspace in the UK of the following spec: HPDL385_G2_PrevGen HP Single Dual Core Opteron 2214 (2.2Ghz) 4GB RAM 2x 10,000 SCSI Drives in RAID 1 Our traffic is up to 550,000 UVs per month. The site runs off a PHP and MySQL setup. The database gets an absolute hammering, we have many complex queries joining multilpe tables. We are using APC for PHP caching. I'm getting to the stage where I've done as much DB and query optimisation as I can and wonder what the next step should be...... I've looked at memcache, but I've got the impression that his requires a large amount of RAM and ideally a dedicated box.... So is the next step to have two boxes; one for database, one for Apache? Or is there a step I've overlooked. Our load is usually around the 2 mark, but right now it's up at 20!

    Read the article

  • Force the computer to always use current display settings

    - by sazpaz
    So I'm having a terrible black screen problem with my new installation of Windows 8. The screen basically goes to black every time I turn it on or sleep, or connect to an external or monitor. I dont really know what steps actually cause the problem and cant seem to figure what steps allow the screen to come back, besides forcing restarts, going to sleep and waking up, and smashing Win + P. I have a strong feeling it's because the Switchable graphics I have (Intel HD + Radeon 5060), so I'm looking for a way to make the computer always use a specified mode (i.e the current mode I'm on, that does show stuff on the screen) and force it to use it everytime? Any ideas? EDIT: I've Installed all the latest drivers I've found. Tried most of the solutions around the web for this problem. Updated the BIOS to UEFI (from HP Support Assistant), etc. Laptop is an HP- Envy 14

    Read the article

  • VMware Virtualisation - Convert 64bit Windows Server to 32bit VM?

    - by dannymcc
    I have just started playing around with Vmware sphere and have the hypervisor OS installed on a spare HP ProLiant DL360 G4. I have created a test virtual machine running Ubuntu which has worked well. As a test project I wanted to convert a powered on server running Windows Server 2008 64bit into a virtual machine. As soon as I ran the Vmware Go software to start the conversion it became apparent that I cannot run 64bit guest OS's on that particular server. So, is there a way of migrating 64bit to 32bit during the conversion?

    Read the article

  • Microsoft Office 2007

    - by nardone25
    Hello everyone in serverfault. I am having a big problem at my job. I will let everyone know what I am using. I have two ibm x3690 servers with vmware esxi on both. Our product server has 8 vm on there. I have two lefthand san from HP. I have a watchgurd firewall. Our other site. I have one server over there ibm x3b90 sever. with one vm on there. I have a cisco 1700 router. and another watchgurd firewall. I have a vpn tunnel to my watchgurd firewall, to my cisco router. Site one works great. site two is having problems saving word documents and having problems printing in publisher 2007. Can someone please help?

    Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >