Search Results

Search found 3567 results on 143 pages for 'instructions'.

Page 69/143 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

  • Performing a silent install of JDeveloper

    - by draikes
    Installing JDeveloper Now that you have downloaded the latest version of JDeveloper from: the Oracle technology network, you are almost ready to install it. The problem is that the GUI installer is not as accessible as it could be. However, there is an alternative called a silent install. To perform a silent install, follow these steps: Download the silent.xml file into the same folder as the JDeveloper installer. You can customize the silent.xml file by setting the folder where JDeveloper will be installed, and by setting the location where you have a 1.6 jdk installed with the accessbridge already configured. The defaults are: JDeveloper wil lbe installed at c:\jdev a jdk is installed at c:\jdk\1.6.0_25 (see instructions in the top of the silent.xml file). Open a command window and navigate to the folder where the JDeveloper installer and silent.xml files are located. Run the following command: jdevstudio11120install.exe -mode=silent -silent_xml=silent.xml -log=install.log Note: this assumes that you are installing JDeveloper 11.1.2.0.0. Change the above command to match the installer package you have. This command will start by extracting the archive then the oracle installer will launch, but you just have to wait until the command prompt returns and voila it will be installed. To run JDeveloper: Now you can use windows explorer to navigate to the %JDEV_HOME% as specified in the silent.xml file (c:\jdev unless you changed it)and drill down to: jdeveloper\jdev\bin and now you have a couple of choices. If you have a 32-bit jdk configured with the accessbridge, then run jdevw.exe, however, if you have a 64-bit jdk copnfigured with the accessbridge, you should run jdev64w.exe. For instructiosn on setting up Accessbridge 2.0.1, see my earlier post. Disclaimer: As always if something doesn't quite go as planned, and you have a problem, please feel free to contact me via email at: don dot raikes at oracle dot com.

    Read the article

  • Windows CE: SDK Doesn’t Show up in Visual Studio 2008

    - by Bruce Eitman
    A customer recently contacted me because after installing an SDK it didn’t show up in Visual Studio 2008.  So being a good vendor I installed VS2008 and then installed the SDK – no problem the SDK showed up and I could create projects based on it. I let the customer know that the SDK definitely works with VS2008. The customer got back to me and asked what OS I was using. Hmm, how could that play into this? I told him that I use Windows XP, and it turned out that he is way more modern than I am and is using both Windows Vista and 7. The customer opened a support case with Microsoft. The answer turns out to be that the SDK install requires the user to be logged on as an administrator when installing on Windows Vista and 7 for the SDK to show up in Visual Studio 2008. This problem does not seem to exist for Visual Studio 2005 on those operating systems. The actual instructions from Microsoft Support are: 1)      Make sure Visual Studio 2008 is not running. I also shut down the device emulator manager but you may not be using that. 2)      Open a “Visual Studio 2008 Command Prompt” as Administrator. On Windows 7 just right click the short cut and pick the “Run as administrator” option. 3)      Enter the following command: msiexec /log SDKInstallLog.txt /package <the path to your .msi file> 4)      When asked if you wish to do a custom or complete install pick custom 5)      Instruct the installer to omit the installation of the documentation. This was something I found about CE 6 SDK installation issue and may have no bearing upon your problem but I did it anyway. 6)      Install   Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Can't exec "locale": No such file or directory

    - by Alex
    I am new in Linux. I was trying to install wine and after /i followed instructions from a youtube video i got to the point where I needed to install wine from Ubuntu Software Center. The problem is the Ubuntu Software Center doesn't work anymore, it ask me to reparir it, and when I push the Repair button it gives me this error: installArchives() failed: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (2) Please help me. Thank you :D

    Read the article

  • Now Available: Visual Studio 2010 Release Candidate Virtual Machines with Sample Data and Hands-on-L

    - by John Alexander
    From a message from Brian Keller: “Back in December we posted a set of virtual machines pre-configured with Visual Studio 2010 Beta 2, Visual Studio Team Foundation Server 2010 Beta 2, and 7 hands-on-labs. I am pleased to announce that today we have shipped an updated virtual machine using the Visual Studio 2010 Release Candidate bits, a brand new sample application, and 9 hands-on-labs. This VM is customer-ready and includes everything you need to learn and/or deliver demonstrations of many of my favorite application lifecycle management (ALM) capabilities in Visual Studio 2010. This VM is available in the virtualization platform of your choice (Hyper-V, Virtual PC 2007 SP1, and Windows [7] Virtual PC). Hyper-V is highly recommended because of the performance benefits and snapshotting capabilities. Tailspin Toys The sample application we are using in this virtual machine is a simple ASP.NET MVC 2 storefront called Tailspin Toys. Tailspin Toys sells model airplanes and relies on the application lifecycle management capabilities of Visual Studio 2010 to help them build, test, and maintain their storefront. Major kudos go to Dan Massey for building out this great application for us. Hands-on-Labs / Demo Scripts The 9 hands-on-labs / demo scripts which accompany this virtual machine cover several of the core capabilities of conducting application lifecycle management with Visual Studio 2010. Each document can be used by an individual in a hands-on-lab capacity, to learn how to perform a given set of tasks, or used by a presenter to deliver a demonstration or classroom-style training. Unlike the beta 2 release, 100% of these labs target Tailspin Toys to help ensure a consistent storytelling experience. Software quality: Authoring and Running Manual Tests using Microsoft Test Manager 2010 Introduction to Test Case Management with Microsoft Test Manager 2010 Introduction to Coded UI Tests with Visual Studio 2010 Ultimate Debugging with IntelliTrace using Visual Studio 2010 Ultimate Software architecture: Code Discovery using the architecture tools in Visual Studio 2010 Ultimate Understanding Class Coupling with Visual Studio 2010 Ultimate Using the Architecture Explore in Visual Studio 2010 Ultimate to Analyze Your Code Software Configuration Management: Planning your Projects with Team Foundation Server 2010 Branching and Merging Visualization with Team Foundation Server 2010 “ Check out Brian’s Post for more info including download instructions…

    Read the article

  • Imperative vs. LINQ Performance on WP7

    - by Bil Simser
    Jesse Liberty had a nice post presenting the concepts around imperative, LINQ and fluent programming to populate a listbox. Check out the post as it’s a great example of some foundational things every .NET programmer should know. I was more interested in what the IL code that would be generated from imperative vs. LINQ was like and what the performance numbers are and how they differ. The code at the instruction level is interesting but not surprising. The imperative example with it’s creating lists and loops weighs in at about 60 instructions. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: .method private hidebysig instance void ImperativeMethod() cil managed 2: { 3: .maxstack 3 4: .locals init ( 5: [0] class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> someData, 6: [1] class [mscorlib]System.Collections.Generic.List`1<int32> inLoop, 7: [2] int32 n, 8: [3] class [mscorlib]System.Collections.Generic.IEnumerator`1<int32> CS$5$0000, 9: [4] bool CS$4$0001) 10: L_0000: nop 11: L_0001: ldc.i4.1 12: L_0002: ldc.i4.s 50 13: L_0004: call class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> [System.Core]System.Linq.Enumerable::Range(int32, int32) 14: L_0009: stloc.0 15: L_000a: newobj instance void [mscorlib]System.Collections.Generic.List`1<int32>::.ctor() 16: L_000f: stloc.1 17: L_0010: nop 18: L_0011: ldloc.0 19: L_0012: callvirt instance class [mscorlib]System.Collections.Generic.IEnumerator`1<!0> [mscorlib]System.Collections.Generic.IEnumerable`1<int32>::GetEnumerator() 20: L_0017: stloc.3 21: L_0018: br.s L_003a 22: L_001a: ldloc.3 23: L_001b: callvirt instance !0 [mscorlib]System.Collections.Generic.IEnumerator`1<int32>::get_Current() 24: L_0020: stloc.2 25: L_0021: nop 26: L_0022: ldloc.2 27: L_0023: ldc.i4.5 28: L_0024: cgt 29: L_0026: ldc.i4.0 30: L_0027: ceq 31: L_0029: stloc.s CS$4$0001 32: L_002b: ldloc.s CS$4$0001 33: L_002d: brtrue.s L_0039 34: L_002f: ldloc.1 35: L_0030: ldloc.2 36: L_0031: ldloc.2 37: L_0032: mul 38: L_0033: callvirt instance void [mscorlib]System.Collections.Generic.List`1<int32>::Add(!0) 39: L_0038: nop 40: L_0039: nop 41: L_003a: ldloc.3 42: L_003b: callvirt instance bool [mscorlib]System.Collections.IEnumerator::MoveNext() 43: L_0040: stloc.s CS$4$0001 44: L_0042: ldloc.s CS$4$0001 45: L_0044: brtrue.s L_001a 46: L_0046: leave.s L_005a 47: L_0048: ldloc.3 48: L_0049: ldnull 49: L_004a: ceq 50: L_004c: stloc.s CS$4$0001 51: L_004e: ldloc.s CS$4$0001 52: L_0050: brtrue.s L_0059 53: L_0052: ldloc.3 54: L_0053: callvirt instance void [mscorlib]System.IDisposable::Dispose() 55: L_0058: nop 56: L_0059: endfinally 57: L_005a: nop 58: L_005b: ldarg.0 59: L_005c: ldfld class [System.Windows]System.Windows.Controls.ListBox PerfTest.MainPage::LB1 60: L_0061: ldloc.1 61: L_0062: callvirt instance void [System.Windows]System.Windows.Controls.ItemsControl::set_ItemsSource(class [mscorlib]System.Collections.IEnumerable) 62: L_0067: nop 63: L_0068: ret 64: .try L_0018 to L_0048 finally handler L_0048 to L_005a 65: } 66:   67: Compare that to the IL generated for the LINQ version which has about half of the instructions and just gets the job done, no fluff. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: .method private hidebysig instance void LINQMethod() cil managed 2: { 3: .maxstack 4 4: .locals init ( 5: [0] class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> someData, 6: [1] class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> queryResult) 7: L_0000: nop 8: L_0001: ldc.i4.1 9: L_0002: ldc.i4.s 50 10: L_0004: call class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> [System.Core]System.Linq.Enumerable::Range(int32, int32) 11: L_0009: stloc.0 12: L_000a: ldloc.0 13: L_000b: ldsfld class [System.Core]System.Func`2<int32, bool> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate6 14: L_0010: brtrue.s L_0025 15: L_0012: ldnull 16: L_0013: ldftn bool PerfTest.MainPage::<LINQProgramming>b__4(int32) 17: L_0019: newobj instance void [System.Core]System.Func`2<int32, bool>::.ctor(object, native int) 18: L_001e: stsfld class [System.Core]System.Func`2<int32, bool> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate6 19: L_0023: br.s L_0025 20: L_0025: ldsfld class [System.Core]System.Func`2<int32, bool> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate6 21: L_002a: call class [mscorlib]System.Collections.Generic.IEnumerable`1<!!0> [System.Core]System.Linq.Enumerable::Where<int32>(class [mscorlib]System.Collections.Generic.IEnumerable`1<!!0>, class [System.Core]System.Func`2<!!0, bool>) 22: L_002f: ldsfld class [System.Core]System.Func`2<int32, int32> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate7 23: L_0034: brtrue.s L_0049 24: L_0036: ldnull 25: L_0037: ldftn int32 PerfTest.MainPage::<LINQProgramming>b__5(int32) 26: L_003d: newobj instance void [System.Core]System.Func`2<int32, int32>::.ctor(object, native int) 27: L_0042: stsfld class [System.Core]System.Func`2<int32, int32> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate7 28: L_0047: br.s L_0049 29: L_0049: ldsfld class [System.Core]System.Func`2<int32, int32> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate7 30: L_004e: call class [mscorlib]System.Collections.Generic.IEnumerable`1<!!1> [System.Core]System.Linq.Enumerable::Select<int32, int32>(class [mscorlib]System.Collections.Generic.IEnumerable`1<!!0>, class [System.Core]System.Func`2<!!0, !!1>) 31: L_0053: stloc.1 32: L_0054: ldarg.0 33: L_0055: ldfld class [System.Windows]System.Windows.Controls.ListBox PerfTest.MainPage::LB2 34: L_005a: ldloc.1 35: L_005b: callvirt instance void [System.Windows]System.Windows.Controls.ItemsControl::set_ItemsSource(class [mscorlib]System.Collections.IEnumerable) 36: L_0060: nop 37: L_0061: ret 38: } Again, not surprising here but a good indicator that you should consider using LINQ where possible. In fact if you have ReSharper installed you’ll see a squiggly (technical term) in the imperative code that says “Hey Dude, I can convert this to LINQ if you want to be c00L!” (or something like that, it’s the 2010 geek version of Clippy). What about the fluent version? As Jon correctly pointed out in the comments, when you compare the IL for the LINQ code and the IL for the fluent code it’s the same. LINQ and the fluent interface are just syntactical sugar so you decide what you’re most comfortable with. At the end of the day they’re both the same. Now onto the numbers. Again I expected the imperative version to be better performing than the LINQ version (before I saw the IL that was generated). Call it womanly instinct. A gut feel. Whatever. Some of the numbers are interesting though. For Jesse’s example of 50 items, the numbers were interesting. The imperative sample clocked in at 7ms while the LINQ version completed in 4. As the number of items went up, the elapsed time didn’t necessarily climb exponentially. At 500 items they were pretty much the same and the results were similar up to about 50,000 items. After that I tried 500,000 items where the gap widened but not by much (2.2 seconds for imperative, 2.3 for LINQ). It wasn’t until I tried 5,000,000 items where things were noticeable. Imperative filled the list in 20 seconds while LINQ took 8 seconds longer (although personally I wouldn’t suggest you put 5 million items in a list unless you want your users showing up at your door with torches and pitchforks). Here’s the table with the full results. Method/Items 50 500 5,000 50,000 500,000 5,000,000 Imperative 7ms 7ms 38ms 223ms 2230ms 20974ms LINQ/Fluent 4ms 6ms 41ms 240ms 2310ms 28731ms Like I said, at the end of the day it’s not a huge difference and you really don’t want your users waiting around for 30 seconds on a mobile device filling lists. In fact if Windows Phone 7 detects you’re taking more than 10 seconds to do any one thing, it considers the app hung and shuts it down. The results here are for Windows Phone 7 but frankly they're the same for desktop and web apps so feel free to apply it generally. From a programming perspective, choose what you like. Some LINQ statements can get pretty hairy so I usually fall back with my simple mind and write it imperatively. If you really want to impress your friends, write it old school then let ReSharper do the hard work for! Happy programming!

    Read the article

  • Get the MakeUseOf eBook Guide to Speeding Up Windows for Free

    - by ETC
    Our friends over at MakeUseOf.com have released yet another eBook in their series of Guides to, well, just about everything. This one gives you some tips for speeding up your Windows PC. The guide has a ton of different tips, and while I wouldn’t necessarily say you follow every single tip to the letter (since everybody’s setup is different), it does give you lots of great ideas for speeding up your PC, as well as links to resources, and instructions for how to perform various cleanup tasks. The best tips? Make sure to keep your PC crapware-free, upgrade your RAM if you’re low, scan for viruses, and run some type of disk cleanup on a regular basis. Download the MakeUseOf Windows on Speed Guide (PDF) [Direct Download Link] Windows on Speed [MakeUseOf] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar Reader for Android Updates; Now with Feed Widgets and More

    Read the article

  • Facebook: Hide Your Status Updates From Your Boss/Ex or Any Specific Friend

    - by Gopinath
    Sometime we want to hide our status updates from specific people who are already accepted as Friends in Facebook. Do you wonder why we need to accept someone as friend and then hide status updates from them? Well, may be you have to accept a friend request from your boss, but certainly love to hide status updates as well as other Facebook activities from him. Something similar goes with few annoying friends whom you cant’ de-friend but like to hide your updates. Thanks to Facebook for providing fine grain privacy options on controlling what we want to share and with whom we want to share. It’s very easy to block one or more specific friends from seeing your status updates. Here are the step by step instructions: 1. Login to Facebook and go to Privacy Settings Page. It shows a page something similar to what is shown in the below image. 2. Click on “Customize settings” link 3. Expand the privacy options available in the section Things I Share -> Posts by me. Choose Customise from the list of available options   4. Type the list of unwanted friend’s names in to input box of the section "Hide this from”. Here is a screen grab of couple of my friends whom I added for writing this post 5. Click the Save Settings button. That’s all. Facebook will ensure that these people will not see your status updates on their news feed. Enjoyed the Facebook Tip? Join Tech Dreams on Facebook to read all our blog posts on your Facebook’s news feed. Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • CodePlex Daily Summary for Monday, December 27, 2010

    CodePlex Daily Summary for Monday, December 27, 2010Popular ReleasesRocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresVCC: Latest build, v2.1.31226.0: Automatic drop of latest buildFxCop Integrator for Visual Studio 2010: FxCop Integrtor 1.1.0: New FeatureSearch violation information FxCop Integrator provides the violation search feature. You can find out specific violation information by simple search expression.Analyze with FxCop project file FxCop Integrator supports code analysis with FxCop project file. You can customize code analysis behavior (e.g. analyze specifid types only, use specific rules only, and so on). ImprovementImproved the code analysis result list to show more information (added Proejct and File column). Change...Flickr Wallpaper Rotator (for Windows desktop): Wallpaper Flickr 1.1: Some minor bugfixes (mostly covering when network connection is flakey, so I discovered them all while at my parents' house for Christmas).Mcopy API: McopyAPI v.1.0.0.2: changed display help "mcopyapi /?" and a few minor changedOPSM: OPSM v2.0: Updated version, 30%-40% faster than v1.0. Requires .NET Framework 2.0People's Note: People's Note 0.19: Added touch scrolling to the note view screen. To install: copy the appropriate CAB file onto your WM device and run it.HSS Core Framework: HSS Core v4.0.700.10: Release v4.0.700.10 December 25th, 2010 Upgrade Instructions from v4.0.700 to v4.0.700.10: (patch release) Uninstall v4.0.700 Install the new v4.0.700.10 Upgrade Instructions: (full upgrade from a version prior to v4.0.700) Uninstall your old version Update the Log Configuration, by changing the logging from Database to Machine Backup and then Truncate the hss logging tables Uninstall the HSSLOG Database using the HSSLOG Database install wizard Uninstall the HSS Core Framework Ins...NoSimplerAccounting: NoSimplerAccounting 6.0: -Fixed a bug in expense category report.NHibernate Mapping Generator: NHibernate Mapping Generator 2.0: Added support for Postgres (Thanks to Angelo)NewLife XCode: XCode v6.5.2010.1223 ????(????v3.5??): XCode v6.5.2010.1223 ????,??: NewLife.Core ??? NewLife.Net ??? XControl ??? XTemplate ????,??C#?????? XAgent ???? NewLife.CommonEnitty ??????(???,XCode??????) XCode?? ?????????,??????????????????,?????95% XCode v3.5.2009.0714 ??,?v3.5?v6.0???????????????,?????????。v3.5???????????,??????????????。 XCoder ??XTemplate?????????,????????XCode??? XCoder_Src ???????(????XTemplate????),??????????????????MiniTwitter: 1.64: MiniTwitter 1.64 ???? ?? 1.63 ??? URL ??????????????VivoSocial: VivoSocial 7.4.0: Please see changes: http://support.vivoware.com/project/ChangeLog.aspx?PROJID=48Umbraco CMS: Umbraco 4.6 Beta - codename JUNO: The Umbraco 4.6 beta (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains more than 89 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login t...SSH.NET Library: 2010.12.23: This release includes some bug fixes and few new fetures. Fixes Allow to retrieve big directory structures ssh-dss algorithm is fixed Populate sftp file attributes New Features Support for passhrase when private key is used Support added for diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha256 and diffie-hellman-group-exchange-sha1 key exchange algorithms Allow to provide multiple key files for authentication Add support for "keyboard-interactive" authentication method...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 2.3.0: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. Release notesThis will be the last release targeting ASP.NET MVC 2 and .NET 3.5. MvcSiteMapProvider 3.0.0 will be targeting ASP.NET MVC 3 and .NET 4 Web.config setting skipAssemblyScanOn has been deprecated in favor of excludeAssembliesForScan and includeAssembliesForScan ISiteMapNodeUrlResolver is now completely responsible for generating th...Media Companion: Media Companion 3.400: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. A manual is included to get you startedMulticore Task Framework: MTF 1.0.1: Release 1.0.1 of Multicore Task Framework.SQL Monitor - tracking sql server activities: SQL Monitor 3.0 alpha 7: 1. added script save/load in user query window 2. fixed problem with connection dialog when choosing windows auth but still ask for user name 3. auto open user table when double click one table node 4. improved alert message, added log only methodEnhSim: EnhSim 2.2.6 ALPHA: 2.2.6 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Fixing up some r...New ProjectsActiveDirectory Object Model Library: The ActiveDirectory Object Model Library, which can operate the AD easily.Allspark: Allspark is an BI focused sharing space.Calendar Control for WP7: Calendar Control for Wp7 (Windows Phone 7). I needed a calendar control for my WP7 app and since WP7 did not have any and I couldn't find anything on the internet I decided to write my own. Please feel free to use it in your project and share if you have improved on it.CryptoPad: CryptoPad is a simple notepad like application that works with encrypted files. Users can open,edit and save encrypted files using CrypoPad without andy other application, everythning is easy and transparent.Entity Visualizer: Entity Framework Debugger VisualizerHTML-IDEx: HTML-IDEx is meant to be an open-source lightweight WYSIWYG HTML editor in which the user can see what they are doing in realtime. Comparable to my other project, Brandons HTML IDE, I'm hoping this to be a huge success.IL Inject: Aspect-oriented programming based on the injection of IL instruction in the methods of an assembly that is marked by attributesIntegração no Trabalho: Este projeto será desenvolvido para ser possível a integração entre funcionarios de uma empresa. O programa funcionará em rede e através dele será possível cadastrar projetos, atividades e seus colegas poderão comentar, criticar e dar dicas nos outros projetos .Knexsys Project: Knexsys, also know as KKD (Knexsys Knowledge Discovery), is a research program that aims to study the capabilities of SQL Server and the .NET framework to implement a rule production engine to mine real-time data. It's developed in C#.mysvn: This project host including some of my own projects. I am interested in WPF and RIA. Furthermore, I want to learn more about C, C++, Java, PHP, Python.OpenTwitter: Twitter clone made with C# and LINQ. this is only a webservice, there is no client for it, the main idea behind opentwitter is to provide a framework that you can use with your own clients ( mobile devices, web pages, etc ) and data provider ( xml, sql server, oracle, etc ).OPSM: OPSM Miner & information projectOutlook UI Tools: Changes to the Outlook UI to make it more usable: * Allow reply to address a recipient instead of the sender * Keep meeting reminders from popping up when overdue many daysSimpleUploadTo: Simple UploadToTFS 4 FPSE: Allow the ability for FrontPage Server Extensions to use TFS as a source control repository.TFS CheckInNotifier: Team Foundation Server 2010 Check-in event notifier desktop application.Universe.WCF.Behaviors: Universe.WCF.Behaviors provides behaviors: - Easy migration from Remoting - Transparent delivery - Traffic Statistics - WCF Streaming Adaptor for BinaryWriter and TextWriter - etc vebshop2: vebshop2Windows Weibo all in one for Sina Sohu and QQ: Windows Weibo all in one for Sina Sohu and QQ.

    Read the article

  • Friday Fun: Vehicles

    - by Mysticgeek
    Friday has finally arrived and it’s time to ignore spreadsheets and TPS reports and waste time playing a flash game. Today we take a look at the fun puzzle game called Vehicles. Vehicles This is a fun game with cartoon style graphics where you navigate vehicles to solve different puzzles. You navigate the vehicles through different puzzle situations by clicking on them with your mouse. You’re given basic instructions on how to complete each level. You’ll need to strategically place the vehicles so you can knock the black vehicles off the screen. As you progress up the levels, they become more challenging and if you need to, you can restart it at any time. Since it’s Friday, and you’re sick of your job, Vehicles is a fun puzzle game to keep your mind of the boringness of work until it’s time for weekend freedom. Play Vehicles at FreeWebArcade Similar Articles Productive Geek Tips Friday Fun: Relieve Workweek Frustration Playing Mad MondayFriday Fun: Uphill RushFriday Fun: Battlefield HeroesFriday Fun: Portal, the Flash VersionFriday Fun: Play 3D Rally Racing in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED

    Read the article

  • Oracle Enterprise Pack for Eclipse (OEPE) 11.1.1.7 adds Oracle ADF Tooling Support

    - by greg.stachnick
    Oracle Enterprise Pack for Eclipse (OEPE) 11.1.1.7 is now available and includes first-time support for Oracle ADF development in Eclipse. Installers for OEPE 11.1.1.7 as well as Eclipse Update instructions can be found on the OEPE downloads page. Here is an overview of the new features of OEPE 11.1.1.7: Support for Oracle ADF Faces Oracle Enterprise Pack for Eclipse (OEPE) 11.1.1.7 now provides support for development with Oracle ADF 11.1.1.4. These features focus on enablement and configuration of the ADF Runtime with Eclipse and WebLogic Server 10.3.4 as well as design time tools for ADF Faces. A new OEPE 11.1.1.7 installer bundles WebLogic Server 10.3.4, Coherence 3.6, and Oracle ADF 11.1.1.4. New Server Extensions allow you to download and install the ADF Runtime libraries into an existing WebLogic Server from within Eclipse. New Project Templates and Facets are available for ADF Faces development (ADF Web). New ADF validators with QuickFix options will check common descriptors for the appropriate ADF configurations. ADF-enabled JSP templates supporting multiple layouts are available under the New menu. New Remote and Local run/deploy support for ADF applications to WebLogic Server 10.3.4 The Palette now supports drag and drop of ADF Faces and Data Visualization Tools (DVT) tags and includes editors for eash tag configuration. The Eclipse Property Sheet has been enhanced to provide advanced ADF tag configuration. AppXRay dependency engine provides improved validation, code completion, and hyperlink navigation for ADF Faces and DVT Tags The Eclipse Web Page Editor enables a more productive source editing experience for ADF Faces. UI Consolidation for WebLogic Server Tools Oracle Enterprise Pack for Eclipse 11.1.1.7 includes a more streamlined UI for WebLogic Server development. You can now view deployments within the Servers view to understand which modules have been deployed to the domain. The MBean Browser View has been merged with the Servers view enabling easier access to MBean values while still allowing Drag and Drop to WLST scripts. WebLogic Server configuration options have been moved to the Properties window, right-click a server configuration and select Properties.

    Read the article

  • Office add on saves you time if you use Moodle

    - by Brian Scarbeau
    Moodle is a free elearning content management software program. It does take a great deal of time to set it up because you need to upload your Office files to Moodle. Now, Microsoft has made that job easier with their new Office Add on. With it you can save directly into Moodle.   Here are the instructions on how to use. Just change the URL you use for your Moodle site. 1. Go to this site and download and install the software. http://www.educationlabs.com/projects/officeaddinformoodle/Pages/default.aspx 2. Open your Office Word in this example and then select Save to Moodle (Notice you can also open files that you have stored in moodle make changes and then save back to moodle. (WOW) 3,  Now because this is the first time you are using this feature you will see a dialog box that looks like this: Enter the moodle website exactly as you see here along with your username and password for moodle. Click the checkbox to remember you. 4. After you click on Save to Moodle you should see a dialog box like this: 5.  Click the plus on the left Lake Highland Preparatory School-Online Learning 6. You will now see the listing of your moodle classes. Now click on the class that you your file to go to and save. Now you use this file in moodle. Good luck!

    Read the article

  • Sync custom AD properties to SharePoint Profile

    - by KunaalKapoor
    Here are some step-by-step instructions regarding configuring SharePoint to sync with custom AD attributes:Add the custom attribute in Active DirectoryThis part will have to be your doing; here is some documentation regarding creating customattributes in AD:http://msdn.microsoft.com/en-us/library/ms675085(VS.85).aspxhttp://technet.microsoft.com/en-us/magazine/2008.05.schema.aspxhttp://blogs.technet.com/b/isingh/archive/2007/02/18/adding-custom-attributes-in-active-directory.aspx2. Open up the miisclient.exe (C:\Program Files\Microsoft Office Servers\14.0\Synchronization Service\UIShell\miisclient.exe)a. This will have to be opened up with the farm admin account3. Click on "Management Agents" in the ribbon4. Right-click the Active Directory Management Agent ("MOSS-<name of sync connection>") and click "Refresh Schema"a. When prompted, enter the credentials for the farm account5. Once complete, close out of miisclient.exe6. Go into Central Admin --> Application Management --> Manage Service Applications --> Go into the User Profile Service Application7. Click on "Manage User Properties"8. Click on "New Property"9. Put in the correct information regarding the attribute that was created10. At the bottom of this page, under the "Source Data Connection" drop down, select the AD synchronization connection you have already configured11. For the "Attribute" drop down, select the new attribute you have created12. For the "Direction" drop down, select "Import"13. Click "OK"14. Run a full synchronization for the user profile service application and the custom property will get synced (as long as the attribute is set in Active Directory for the desired users)

    Read the article

  • New Recommended Bundle Patch (APR 2010) - 9405592 for Patch Automation on EM 10.2.0.5

    - by Hari Prasanna Srinivasan
    New Recommended Bundle Patch 9405592 is available for download from My Oracle Support now. This patch primarily enhances the Patching functionality offered by Oracle Enterprise Manager Grid Control. This patch is cumulative and is a superset of the previously released bundles # 9132461, #8992470, and #8653501, and therefore, includes all the features that were introduced as part of those Recommended Bundle Patches. For more information, refer to Comprehensive Overview of Recommended Bundle Patch 9405592 under support note - OMS and Agent Patches required for setting up Provisioning, Patching and Cloning in 10.2.0.3 to 10.2.0.5 GC [ID 427577.1] FAQ: #1 If I had applied the previous recommended patches, do I need to rollback before applying this? Yes, if you had applied any of the patches (# 9132461, #8992470 and #8653501) you would need to rollback the patch and apply this. For rollback instructions, refer to the patch README from the support note 427577.1 #2 I recently applied the patch 9132461, do I still need the new patch? The new patch contains additional bug fixes. (For more info see,Comprehensive Overview of Recommended Bundle Patch 9405592) - Augmented Verification and Support for Oracle Database 9i Release 2 (9.2.0.8) and Oracle Databases on Microsoft Windows Platform - Bug fixes resolving issues with patching CPUs on Databases running on Windows platforms - Key bug fixes identified at various customers. Oracle strongly recommends you to apply the latest patch to make sure you do no encounter these issues and you are at the latest patch level for faster issue resolution through support. #3 Can I apply this patch on top of PSU3 (9282397) for Enterprise Manager ? Yes, this patch does NOT conflict with PSU3 and can be applied over it. #4 Is there any known conflicts? If you had applied the patch 8573971, it would conflict with this patch(9405592). You would need to rollback the patch 8573971 and apply this Bundle. Apply the overlay patch - 9583322 to get the fixes of the rolled back patch 8573971. Note: The overlay patch is currently unavailable, it will be made available in few days.

    Read the article

  • Does HTML 5 &ldquo;Rich vs. Reach&rdquo; a False Choice?

    - by andrewbrust
    The competition between the Web and proprietary rich platforms, including Windows, Mac OS, iPhone/iPad, Adobe’s Flash/AIR and Microsoft’s Silverlight, is not new. But with the emergence of HTML 5 and imminent support for it in the next release of the major Web browsers, the battle is heating up. And with the announcements made Wednesday at Google's I/O conference, it's getting kicked up yet another notch. The impact of this platform battle on companies in the media and advertising world, and the developers who serve them, is significant. The most prominent question is whether video and rich media online will shift towards pure HTML and away from plug-ins like Flash and Silverlight. In fact, certain features in HTML 5 make it suitable for development for line of business applications as well, further threatening those plug-in technologies. So what's the deal? Is this real or hype? To answer that question, I've done my own research into HTML 5's features and talked to several media-focused, New York area developers to get their opinions. I present my findings to you in this post. Before bearing down into HTML 5 specifics and practitioners’ quotes, let's set the context. To understand what HTML 5 can do, take a look at this video of Sports Illustrated’s HTML 5 prototype. This should start to get you bought into the idea that HTML 5 could be a game-changer. Next, if you happen to have installed the beta version of Google's Chrome 5 browser, take a look at the page linked to below, and in that page, click on any of the game thumbnails to see what's possible, without a plug-in, in this brave new world. (Note, although the instructions for each game tell you to press the A key to start, press the Z key instead.). Here's the link: http://www.kesiev.com/akihabara As an adjunct to what's enabled by HTML 5, consider the various transforms that are part of CSS 3. If you're running Safari as your browser, the following link will showcase this live; if not, you'll see a bitmap that will give you an idea of what's possible: http://webkit.org/blog/386/3d-transforms Are you starting to get the picture (literally)? What has up until now required browser plug-ins and other patches to HTML, most typically Flash, will soon be renderable, natively, in all major browsers. Moreover, it's looking likely that developers will be able to deliver such content and experiences in these browsers using one base of markup and script code (using straight JavaScript and/or jQuery), without resorting to browser-specific code and workarounds. If you're skeptical of this, I wouldn't blame you, especially with respect to Microsoft's Internet Explorer. However, i can tell you with confidence that even Microsoft is dedicated to full-on HTML 5 support in version 9 of that browser, which is currently under development. So what’s new in HTML 5, specifically, that makes sites like this possible?  The specification documents go into deep detail, and there’s no sense in rehashing them here, but a summary is probably in order.   Here is a non-authoritative, but useful, list of the major new feature areas in HTML 5: 2D drawing capabilities and 3D transforms. 2D drawing instructions can be embedded statically into a Web page; application interactivity and animation can be achieved through script.  As mentioned above, 3D transforms are technically part of version 3 of the CSS (Cascading Style Sheets) spec, rather than HTML 5, but they can nonetheless be thought of as part of the bundle.  They allow for rendering of 3D images and animations that, together with 2D drawing, make HTML-based games much more feasible than they are presently, as the links above demonstrate. Embedded audio and video. A media player can appear directly in a rendered Web page, using HTML markup and no plug-ins. Alternately, player controls can be hidden and the content can play automatically. Major enhancements to form-based input. This includes such things as specification of required fields, embedding of text “hints” into a control, limiting valid input on a field to dates, email addresses or a list of values.  There’s more to this, but the gist is that line-of-business applications, with complicated input and data validation, are supported directly Offline caching, local storage and client-side SQL database. These facilities allow Web applications to function more like native apps, even if no internet connection is available. User-defined data. Data (or metadata – data about data) can easily be embedded statically and/or retrieved and updated with Javascript code. This avoids having to embed that data in a separate file, or within script code. Taken together, these features position HTML to compete with, and perhaps overtake, Adobe’s Flash/AIR (and Microsoft’s Silverlight) as a viable Web platform for media, RIAs (rich internet applications – apps that function more like desktop software than Web sites) and interactive Web content, including games. What do players in the media world think about this?  From the embedded video above, we know what Sports Illustrated (and, therefore, Time Warner) think.  Hulu, the major Internet site for broadcast TV content, is on record as saying HTML5 video does not pass muster with them, at least not yet.  YouTube, on the other hand, already has an experimental HTML 5-based version of their site.  TechCrunch has reported that NetFlix is flirting with HTML 5 too, especially as it pertains to embedded browsers in TV-based devices.  And the New York Times’ Web site now embeds some video clips without resorting to Flash.  They have to – otherwise iPhone, iPod Touch and iPad users couldn’t see them in the Mobile Safari browser. What do media-focused developers think about all this?  I talked to several to get their opinions. Michael Pinto is CEO and Founder of Very Memorable Design whose primary focus has been to help marketing directors get traction online.  The firm’s client roster includes the likes Time, Inc., Scholastic and PBS.  Pinto predicts that “More and more microsites that were done entirely in Flash will be done more and more using jQuery. I can also see slideshows and video now being done without Flash. However if you needed to create a game or highly interactive activity Flash would still be the way to go for the web.” A dissenting view comes from Jesse Erlbaum, CEO of The Erlbaum Group, LLC, which serves numerous clients in the magazine publishing sector.  When I asked Erlbaum whether he thought HTML 5 and jQuery/JavaScript would steal significant market share from Flash, he responded “Not at all!  In particular, not for media and advertising customers!  These sectors are not generally in the business of making highly functional applications, which is the one place where HTML5/jQuery/etc really shines.” Ironically, Pinto’s firm is a heavy user of Flash for its projects and Erlbaum’s develops atop the “LAMP” (Linux, Apache, MySQL and PHP/Perl) stack.  For whatever reason, each firm seems to see the other’s toolset as a more viable choice.  But both agree that the developer tool story around HTML 5 is deficient.  Pinto explains “What’s lost with [HTML 5 and Javascript] techniques is that there isn’t a single widely favored easy-to-use tool of choice for authoring. So with Flash you can get up and running right away and not worry about what is different from one browser to the next.“  Erlbaum agrees, saying: “HTML5/Javascript lacks a sophisticated integrated development environment (IDE) which is an essential part of Flash.  If what someone is trying to make is primarily animation, it's a waste of time…to do this in Javascript.  It can be done much more easily in Flash, and with greater cross-browser compatibility and consistency due to the ubiquity of Flash.” Adobe (maker of Flash since its 2005 acquisition of Macromedia) likely agrees.  And for better or worse, they’ve decided to address this shortcoming of HTML 5, even at risk of diminishing their Flash platfrom. Yesterday Adobe announced that their hugely popular Deamweaver Web design authoring tool would directly support HTML 5 and CSS 3 development.  In fact, the Adobe Dreamweaver CS5 HTML5 Pack is downloadable now from Adobe Labs. Maybe Adobe is bowing to pressure from ardent Web professionals like Scott Kellum, Lead Designer at Channel V Media,  a digital and offline branding firm, serving the media and marketing sectors, among others.  Kellum told me that HTML 5 “…will definitely move people away from Flash. It has many of the same functionalities with faster load times and better accessibility. HTML5 will help Flash as well: with the new caching methods you can now even run Flash apps offline.” Although all three Web developers I interviewed would agree that Flash is still required for more sophisticated applications, Kellum seems to have put his finger on why HTML 5 may nonetheless dominate.  In his view, much of the Web development out there has little need for high-end capabilities: “Most people want to add a little punch to a navigation bar or some video and now you can get the biggest bang for your buck with HTML5, CSS3 and Javascript.” I’ve already mentioned that Google’s ongoing I/O conference, at the Moscone West center in San Francisco, is driving the HTML 5 news cycle, big time.  And Google made many announcements of their own, including the open sourcing of their VP8 video codec, new enterprise-oriented capabilities for its App Engine cloud offering, and the creation of the Chrome Web Store, which the company says will make it easier to find and “install” Web applications, in a fashion similar to  the way users procure native apps on various mobile platforms. HTML 5 looks to be disruptive, especially to the media world.  And even if the technology ends up disappointing, the chatter around it alone is causing big changes in the technology world.  If the richness it promises delivers, then magazine publishers and non-text digital advertisers may indeed have a platform for creating compelling content that loads quickly, is standards-based and will render identically in (the newest versions of) all major Web browsers.  Can this development in the digital arena save the titans of the print world?  I can’t predict, but it’s going to be fun to watch, and the competitive innovation from all players in both industries will likely be immense.

    Read the article

  • “psmouse.ko' not found” installing ALPS touchpad in a Lenovo Ideapad Flex 14

    - by user279806
    I was following this instructions with Ubuntu 14.04. https://github.com/he1per/psmouse-dkms-alpsv7 and psmouse serio1: alps: Unknown ALPS touchpad in a Lenovo Ideapad Flex 15 And after many tries I received the following error message: root@alisson-Lenovo-Ideapad-Flex14:/tmp/psmouse-dkms-alpsv7# ./install.sh ------ Building with dkms ------- Error! DKMS tree already contains: psmouse-dkms-alpsv7-1.0 You cannot add the same module/version combo more than once. Module psmouse-dkms-alpsv7/1.0 already built for kernel 3.13.0-24-generic/4 ------ Installing with dkms ------- Module psmouse-dkms-alpsv7/1.0 already installed on kernel 3.13.0-24-generic/x86_64 ???? Error: dkms install failed:\n '/usr/lib/modules/3.13.0-24-generic//updates/psmouse.ko' not found. root@alisson-Lenovo-Ideapad-Flex14:/tmp/psmouse-dkms-alpsv7# than, searching for "psmouse.ko": alisson@alisson-Lenovo-Ideapad-Flex14:~$ locate psmouse.ko /lib/modules/3.13.0-24-generic/kernel/drivers/input/mouse/psmouse.ko /lib/modules/3.13.0-24-generic/updates/dkms/psmouse.ko /var/lib/dkms/psmouse-dkms-alpsv7/1.0/3.13.0-24-generic/x86_64/module/psmouse.ko /var/lib/dkms/psmouse-dkms-alpsv7/1.0/build/src/.psmouse.ko.cmd /var/lib/dkms/psmouse-dkms-alpsv7/1.0/build/src/psmouse.ko alisson@alisson-Lenovo-Ideapad-Flex14:~$ What should I do?

    Read the article

  • Cannot locate packages for Citrix install

    - by Noel Evans
    I'm trying to get a Citrix receiver installed on to Ubuntu 14.04 (64 bit) following Ubuntu's docs. The first line of instructions say to get these required packages: sudo apt-get install libmotif4:i386 nspluginwrapper lib32z1 libc6-i386 libxp6:i386 libxpm4:i386 libasound2:i386 But if I paste in that line, I get this error: Reading state information... Done E: Unable to locate package libmotif4 E: Unable to locate package libxp6 E: Unable to locate package libxpm4 E: Unable to locate package libasound2 My repository settings are below. Is there anything I'm missing in there? Otherwise what do I need to do to install these? $ cat /etc/apt/sources.list deb cdrom:[Ubuntu 14.04 LTS _Trusty Tahr_ - Release amd64 (20140417)]/ precise main restricted deb cdrom:[Ubuntu 14.04 LTS _Trusty Tahr_ - Release amd64 (20140417)]/ trusty main restricted deb-src http://archive.ubuntu.com/ubuntu trusty main restricted #Added by software-properties deb http://archive.ubuntu.com/ubuntu/ trusty main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu/ trusty main restricted universe multiverse #Added by software-properties deb http://security.ubuntu.com/ubuntu/ trusty-security main restricted universe multiverse deb-src http://security.ubuntu.com/ubuntu/ trusty-security main restricted universe multiverse #Added by software-properties deb http://archive.ubuntu.com/ubuntu/ trusty-updates main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu/ trusty-updates main restricted universe multiverse #Added by software-properties deb http://archive.ubuntu.com/ubuntu/ trusty-proposed main universe restricted multiverse deb http://archive.ubuntu.com/ubuntu/ trusty-backports main universe restricted multiverse

    Read the article

  • How I Record Screencasts

    - by Daniel Moth
    I get this asked a lot so here is my brain dump on the topic. What A screencast is just a demo that you present to yourself while recording the screen. As such, my advice for clearing your screen for demo purposes and setting up Visual Studio still applies here (adjusting for the fact I wrote those blog posts when I was running Vista and VS2008, not Windows 8 and VS2012). To see examples of screencasts, watch any of my screencasts on channel9. Why If you are a technical presenter, think of when you get best reactions from a developer audience in your sessions: when you are doing demos, of course. Imagine if you could package those alone and share them with folks to watch over and over? If you have ever gone through a tutorial trying to recreate steps to explore a feature, think how much more helpful it would be if you could watch a video and follow along. Think of how many folks you "touch" with a conference presentation, and how many more you can reach with an online shorter recording of the demo. If you invest so much of your time for the first type of activity, isn't the second type of activity also worth an investment? Fact: If you are able to record a screencast of a demo, you will be much better prepared to deliver it in person. In fact lately I will force myself to make a screencast of any demo I need to present live at an upcoming event. It is also a great backup - if for whatever reason something fails (software, network, etc) during an attempt of a live demo, you can just play the recorded video for the live audience. There are other reasons (e.g. internal sharing of the latest implemented feature) but the context above is the one within which I create most of my screencasts. Software & Hardware I use Camtasia from Tech Smith, version 7.1.1. Microsoft has a variety of options for capturing the screen to video, but I have been using this software for so long now that I have not invested time to explore alternatives… I also use whatever cheapo headset is near me, but sometimes I get some complaints from some folks about the audio so now I try to remember to use "the good headset". I do not use a web camera as I am not a huge fan of PIP. Preparation First you have to know your technology and demo. Once you think you know it, write down the outline and major steps of the demo. Keep it short 5-20 minutes max. I break that rule sometimes but try not to. The longer the video is the more chances that people will not have the patience to sit through it and the larger the download wmv file ends up being. Run your demo a few times, timing yourself each time to ensure that you have the planned timing correct, but also to make sure that you are comfortable with what you are going to demo. Unlike with a live audience, there is no live reaction/feedback to steer you, so it can be a bit unnerving at first. It can also lead you to babble too much, so try extra hard to be succinct when demoing/screencasting on your own. TIP: Before recording, hide your desktop/taskbar clock if it is showing. Recording To record you start the Camtasia Recorder tool Configure the settings thought the menus Capture menu to choose custom size or full screen. I try to use full screen and remember to lower the resolution of your screen to as low as possible, e.g. 1024x768 or 1360x768 or something like that. From the Tools -> Options dialog you can choose to record audio and the volume level. Effects menu I typically leave untouched but you should explore and experiment to your liking, e.g. how the mouse pointer is captured, and whether there should be a delay for the recording when you start it. Once you've configured these settings, typically you just launch this tool and hit the F9 key to start recording. TIP: As you record, if you ever start to "lose your way" hit F9 again to pause recording, regroup your thoughts and flow, and then hit F9 again to resume. Finally, hit F10 to stop recording. At that point the video starts playing for you in the recorder. This is where you can preview the video to see that you are happy with it before saving. If you are happy, hit the Save As menu to choose where you want to save the video.     TIP: If you've really lost your way to the extent where you'll need to do some editing, hit F10 to stop recording, save the video and then record some more - you'll be able to stitch the videos together later and this will make it easier for you to delete the parts where you messed up. TIP: Before you commit to recording the whole demo, every time you should record 5 seconds and preview them to ensure that you are capturing the screen the way you want to and that your audio is still correctly configured and at the right level. Trust me, you do not want to be recording 15 minutes only to find out that you messed up on the configuration somewhere. Editing To edit the video you launch another Camtasia app, the Camtasia Studio. File->New Project. File->Save Project and choose location. File->Import Media and choose the video(s) you saved earlier. These adds them to the area at the top/middle but not at the timeline at the bottom. Right click on the video and choose Add to timeline. It will prompt you for the Editing dimensions and I always choose Recording Dimensions. Do whatever edits you want to do for this video, then add the next video if you have one to stitch and repeat. In terms of edits there are many options. The simplest is to do nothing, which is the option I did when I first starting doing these in 2006. Nowadays, I typically cut out pieces that I don't like and also lower/mute the audio in other areas and also speed up the video in some areas. A full tutorial on how to do this is beyond the scope of this blog post, but your starting point is to select portions on the timeline and then open the Edit menu at the very top (tip: the context menu doesn't have all options). You can spend hours editing a recording, so don’t lose track of time! When you are done editing, save again, and you are now ready to Produce. Producing Production is specific to where you will publish. I've only ever published on channel9, so for that I do the following File -> Produce and share. This opens a wizard dialog In the dropdown choose Custom production settings Hit Next and then choose WMV Hit Next and keep the default of Camtasia Studio Best Quality and File Size (recommended) Hit Next and choose Editing dimensions video size Hit Next, hit Options and you get a dialog. Enter a Title for the project tab and then on the author tab enter the Creator and Homepage. Hit OK Hit Next. Hit Next again. Enter a video file name in the Production name textbox and then hit Finish. Now do other stuff while you wait for the video to be produced and you hear it playing. After the video is produced watch it to ensure it was produced correctly (e.g. sometimes you get mouse issues) and then you are ready for publishing it. Publishing Follow the instructions of the place where you are going to publish. If you are MSFT internal and want to choose channel9 then contact those folks so they can share their instructions (if you don't know who they are ping me and I'll connect you but they are easy to find in the GAL). For me this involves using a tool to point to the video, choosing a file name (again), choosing an image from the video to display when it is not playing, choosing what output formats I want, and then later on a webpage adding tags, adding a description, and adding a title. That’s all folks, have fun! Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • DDD East Anglia, 29th June 2013 - Async Patterns presentation and source code

    - by Liam Westley
    Originally posted on: http://geekswithblogs.net/twickers/archive/2013/07/01/ddd-east-anglia-29th-june-2013---async-patterns-presentation.aspxMany thanks to the team in Cambridge for an awesome first conference DDD East Anglia.  I definitely appreciate how each of the different areas have their own distinctive atmosphere and feel.  Thanks to some great sponsors we enjoyed a great venue and some excellent nibbles. For those who attended my Async my source code and presentation are available on GitHub, https://github.com/westleyl/DDDEastAnglia2013-Async.git If you are new to Git then the easiest client to install is GitHub for Windows, a graphical UI for accessing GitHub. Personally, I also have Git Extensions and Tortoise Git installed. Tortoise Git is the file explorer add-in that works in a familiar manner to TortoiseSVN. As I mentioned during the presentation I have not included the sample data, the music files, in the source code placed on GitHub but I have included instructions on how to download them from http://silents.bandcamp.comand place them in the correct folders. Also, Windows Media Player, by default, does not play Ogg Vorbis and Flac music files, however you can download the codec installer for these, for free, from http://xiph.org/dshow. I have included the .Net 4.0 version of the source code that uses the Microsoft.Bcl.Async NuGet package - once you have got the project from GitHub you will need to install this NuGet package for the code to compile. Load Project into Visual Studio 2012 Access the NuGet package manager (Tools -> Library Package Manager -> Manage NuGet Packages For Solution) Highlight Online and then Search Online for microsoft.bcl.async Click on Install button Resources : You can download the Task-based Asynchronous Pattern white paper by Stephen Toub, which was the inspiration for this presentation from here - http://www.microsoft.com/en-us/download/details.aspx?id=19957 Presentation : If you just want the presentation and don’t want to bother with a GitHub login you can download the PowerPoint presentation from here.

    Read the article

  • BizTalk 2009 - The Community ODBC Adapter: Installation

    - by Stuart Brierley
    I have previsouly detailed the installation of MySQL, the configuration of MySQL and the installation of the ODBC Data Connector for MySQL.  The reason I needed to install and configure these servers was to provide a test environment for a BizTalk Server 2009 solution I am working on where BizTalk will be querying and populating a MySQL database. To do this I then needed to install and add the Community ODBC adapter from Two Connect: "The Community BizTalk Adapter for ODBC is based on the code that was first made available on GotDotNet a few years ago. TwoConnect has refreshed this code, added an installer, and tested it against the latest BizTalk editions. We are releasing the updates back to the BizTalk developer, user and partner community as part of our ongoing community intitiatives. This is the second adapter package that TwoConnect makes available to the community after the very succesful release of the BizTalk WSE 3 adapter a couple of years ago. This adapter is useful in all ODBC based integration scenarios. The following are the new features added and fixes made to the old code base on GotDotNet." Detailed below are the installation instructions for this adapter.  Downloading and running the installer will load up the splash screen. Next you need to select the installation location for the adapter. You then need to confirm the installation following which you will be shown the installation progress. Assuming all has gone well you should see the installation complete screen. Once the installation has completed successfully you will then need to add the adapter to your BizTalk Server.  To do this open the BizTalk Administration console, expand the Platform Settings and right click on Adapters then select New\Adapter. You should then be able to select the ODBC adapter and choose the display name for the adapter. This adapter will then be shown in the BizTalk Administration console. Next I will be looking at using the ODBC Adapter when: Generating schemas Creating a receive port Creating a send port

    Read the article

  • How do I install the newest Flash beta for Minefield on 64-bit Ubuntu?

    - by Øsse
    Hi, I'm using a fully updated Ubuntu 10.10 64-bit which is pretty much bog standard except I'm using Minefield from the Mozilla daily PPA in addition to Firefox as provided by Ubuntu. I want to try the newest beta of Flash (10.3 as of writing). The installation instructions simply say "drop libflashplayer.so into the plugin folder of your browser". This the 32-bit version. Currently I'm using Flash as provided by the package flashplugin-installer (ver. 10.2.152.27ubuntu0.10.10.1). Going to about:plugins in Minefield/Firefox says the version of Flash I'm running is 10.2 r152 and the file responsible is npwrapper.libflashplayer.so. I have two files with that name on my system. One is /usr/share/ubufox/plugins/npwrapper.libflashplayer.so which is a broken link to /usr/lib/flashplugin-installer/npwrapper.libflashplayer.so. The other is /var/lib/flashplugin-installer/npwrapper.libflashplayer.so (note var instead of usr). I also have a file simply called libflashplayer.so in /usr/lib/flashplugin-installer/. So it seems Firefox/Minefield gets its Flash plugin from a file that doesn't exist, and replacing libflashplayer.so with the one in the archive from Adobe has no effect. Since I want to try the 32-bit version I have to use the wrapper. The only way I know how is through the flashplugin-installer package. How would I go about installing the newest 32-bit beta Flash if possible at all? And where is "the plugin folder of my browser"?

    Read the article

  • Get the Information You Need. Delivered.

    - by Get Proactive Customer Adoption Team
    Untitled Document Don’t Take Chances with Alerts—Get Hot Topics When Oracle Support publishes an alert, how do you find out about it? I can see any number of ways you might stumble onto an alert that you need. For example, if you are visiting My Oracle Support in search of answers under the Knowledge tab and happen to notice, and click on, the Alert tab the under the Knowledge Article region, you might see an alert listed for one of the products you use. There are other ways… like subscribing to one of the Oracle Blogs and finding the alert in your RSS feed because the blogger decided to write up that topic for the latest post. I’m sure your colleagues sometimes pass on critical alerts for your products, I hope, giving you the information before you needed it. Well, no matter how you learn about an alert, the important point is that you get the correct information in a timely way. Right? I must admit, the ‘magic’ required to find out via these methods makes me nervous. Rather than leave it to chance, I think you need a more reliable way to stay informed and receive alerts for your products when Oracle publishes them. You may not be aware of it, but there is a better way. Oracle Premier Support Customers can leverage the “Hot Topics E-Mail.” You select the products and topics that interest you. Based on your choices, the system sends you the support related information when Oracle Support publishes it. This way you and I can both relax, knowing you’ll have ready access to the alerts you need, and enjoy the breadth of support related information you choose to subscribe to. This can include recently updated Knowledge base articles, new bugs, and product news. If I’ve convinced you, you will want to know how to set up and subscribe to the Hot Topics E-Mail. The complete guide, Doc ID 793436.1, is waiting for you. Follow the instructions in the document, and you will always stay on top of the latest information from Oracle Support.

    Read the article

  • Glowing Chess Set Combines LEDs, Chess, and DIY Electronics Fun

    - by ETC
    Anyone who says that the centuries old game of Chess cannot be improved upon has obviously never played with a glowing chess board. Today we take a look at a cheap glass chess set modded to glow from within. Instructables user Tetranitrate had a glass chess set he scored on-the-cheap and had always wanted to illuminate it in some way. He ruled out illuminating the board itself (no good way to keep track of the piece colors) and putting a battery in each piece (too big of a pain, over complicates the design). His final solution, the one seen in the photo here, was to build a wood and copper board, run a low voltage across the surface of the chess board, and affix a conductive copper ring to the bottom of each chess piece to power the LED embedded inside. In this manner the pieces would glow on the board and then go dark as soon as they were removed from play. Hit up the link below for additional details on the build and instructions on building your own. LED Chess Set [Instructables] Latest Features How-To Geek ETC How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? Save Files Directly from Your Browser to the Cloud in Chrome and Iron The Steve Jobs Chronicles – Charlie and the Apple Factory [Video] Google Chrome Updates; Faster, Cleaner Menus, Encrypted Password Syncing, and More Glowing Chess Set Combines LEDs, Chess, and DIY Electronics Fun Peaceful Alpine River on a Sunny Day [Wallpaper] Fast Society Creates Mini and Mobile Temporary Social Networks

    Read the article

  • Compiling Gnucash 2.6.3 in Ubuntu 14.04

    - by wolveryn
    Downloaded the debian file from source forge and followed instructions, where these errors appear, I re-downloaded the file several times with same error. I want to install the latest Gnucash not the one available on software center. Thank you for your support. /qof/gnc-date/qof print date dmy buff: There are some differences between distros in the way they namelocales, and this can cause trouble with the locale-basedformatting. If you get the assert in this function, run locale -aand make sure that en_US, en_GB, and fr_FR are installed and thatif a suffix is needed it's in the suffixes array.** ERROR:test-gnc-date.c:465:test_gnc_setlocale: code should not be reached FAIL GTester: last random seed: R02Sd8d3d0e67be954baa8ec75d81a14c0e3 /bin/bash: line 1: 18889 Terminated MALLOC_CHECK_=2 MALLOC_PERTURB_=$((${RANDOM:-256} % 256)) gtester --verbose test-qof make[5]: *** [test-nonrecursive] Error 143 make[5]: Leaving directory `/home/ahmed/gnucash/gnucash-2.6.3/src/libqof/qof/test' make[4]: *** [check-am] Error 2 make[4]: Leaving directory `/home/ahmed/gnucash/gnucash-2.6.3/src/libqof/qof/test' make[3]: *** [check-recursive] Error 1 make[3]: Leaving directory `/home/ahmed/gnucash/gnucash-2.6.3/src/libqof/qof' make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory `/home/ahmed/gnucash/gnucash-2.6.3/src/libqof' make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory `/home/ahmed/gnucash/gnucash-2.6.3/src' make: *** [check-recursive] Error 1

    Read the article

  • How should I start with Lisp?

    - by Gary Rowe
    I've been programming for years now, working my way through various iterations of Blub (BASIC, Assembler, C, C++, Visual Basic, Java, Ruby in no particular order of "Blub-ness") and I'd like to learn Lisp. However, I have a lot of intertia what with limited time (family, full time job etc) and a comfortable happiness with my current Blub (Java). So my question is this, given that I'm someone who would really like to learn Lisp, what would be the initial steps to get a good result that demonstrates the superiority of Lisp in web development? Maybe I'm missing the point, but that's how I would initially see the application of my Lisp knowledge. I'm thinking "use dialect A, use IDE B, follow instructions on page C, question your sanity after monads using counsellor D". I'd just like to know what people here consider to be an optimal set of values for A, B, C and perhaps D. Also some discussion on the relative merit of learning such a powerful language as opposed to, say, becoming a Rails expert. Just to add some more detail, I'll be developing on MacOS (or a Linux VM) - no Windows based approaches will be necessary, thanks. Notes for those just browsing by I'm going to keep this question open for a while so that I can offer feedback on the suggestions after I've been able to explore them. If you happen to be browsing by and feel you have something to add, please do. I would really welcome your feedback. Interesting links Assuming you're coming at Lisp from a Java background, this set of links will get you started quickly. Using Intellij's La Clojure plugin to integrate Lisp (videocast) Lisp for the Web Online version of Practical Common Lisp (c/o Frank Shearar) Land of Lisp a (+ (+ very quirky) game based) way in but makes it all so straightforward

    Read the article

  • SQL SERVER – Download SQL Server Product Documentation

    - by pinaldave
    Today I just returned from Bangalore User Group Meeting. Attending User Group meeting is indeed fun and really great experience. The best part of the User Group is meeting like minded people and have a great conversation with them. During the meeting I was asked why one has to go online to access SQL Server Product Documentation. I can clearly see there can be many reasons for why one wants the documentation to be available offline. The reasons can be anything but not limited to Company Firewall No Internet (power failure, on road or disaster) Internet Bandwidth Limitatoin Company Proxy Issues … and much more… In this kind of situation one needs documentation which is offline and easily available in local computer. The Microsoft SQL Server 2012 setup installs only the Help Viewer and related components for managing Help settings. Setup does not directly install any documentation. All of the SQL Server documentation is available online. Well, Microsoft has recently released Production Documentation available for offline users as well. You just have to download the executable file and follow all the instructions. Please follow the link below for download of the file. There is detailed instruction on how to download and install the documentation offline. Product Documentation for Microsoft SQL Server 2012 Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >