Search Results

Search found 2133 results on 86 pages for 'iso'.

Page 69/86 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

  - by Alastair

  We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

  Read the article

• Enable Full Screen Mode in Media Center Without Trapping the Mouse

  - by DigitalGeekery

  If you have a dual monitor setup and use Windows Media Center, you’re probably aware that when WMC is in full screen mode, it traps the mouse so you can’t work on a second monitor. Here we look at how to solve the annoyance. The Maxifier is an application that allows you to open Media Center in full screen mode without restricting the mouse. It relieves the annoyance of WMC capturing your mouse on a dual monitor setup. Note: If you don’t have two monitors attached, most of The Maxifier’s functions won’t work. Installation and Use Download, extract, and install The Maxifier. (See the download link below) The Maxifier runs minimized in the system tray and you access the options by right-clicking on the icon. If Media Center is not already open, you can choose Start Media Center to start WMC on the main start screen. Or, choose one of the other selections to open another area of Media Center. By default, Maxifier opens Media Center in full screen mode on the secondary monitor. When Media Center is open in full screen mode, you’ll notice you can now freely move your mouse around your multi-monitor setup. When Media Center is open, you’ll see five additional options. The Fit Screen options simply fits Media Center to the full screen, but still show the Windows borders. Full screen options put WMC in full screen mode.   The Maxifier Options allow you to choose from the various start up options. Selecting Watch for Media Center starting will prompt Maxifier to open WMC to the main start page in full screen mode on the secondary monitor automatically, even if you open Media Center without using The Maxifier.  (You may need to restart for this to take effect) If you have more than 2 monitors, you can define on which monitor to open Media Center, and which monitor you consider to be the main screen.   You can also define a number of Hotkeys in The Maxifier settings. First, select the Enable Hotkeys checkbox. To create a Hotkey, click in the text field and then press the keys to use as the Hotkey. To remove a Hotkey, click in the field and press the Delete key.   Conclusion The Maxifier is a simple program that enables Media Center users to take full advantage of a multi-monitor workspace. It works with both Vista and Windows 7. Version 1.4 is a stable application for Vista, and Version 1.5b is a beta application for Windows 7. Looking for more Media Center tips and tweaks? Check out some startup customizations for Windows 7 Media Center, how to automatically mount and view ISO’s in WMC, and how to add background images and themes to Windows 7 Media Center. Link Download the Maxifier Similar Articles Productive Geek Tips Startup Customizations for Media Center in Windows 7Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Lock The Screen While in Full-Screen Mode in Windows Media PlayerSwitch Windows by Hovering the Mouse Over a Window in Windows 7 or VistaIntegrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Steve Jobs’ iPhone 4 Keynote Video Watch World Cup Online On These Sites Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites

  Read the article

• Silverlight Cream for February 13, 2011 -- #1046

  - by Dave Campbell

  In this Issue: Loek van den Ouweland, Colin Eberhardt, Rudi Grobler, Joost van Schaik, Mike Taulty(-2-, -3-), Deborah Kurata, David Kelley, Peter Foot, Samuel Jack(-2-), and WindowsPhoneGeek(-2-). Above the Fold: Silverlight: "Silverlight Simple MVVM Commanding" Deborah Kurata WP7: "WP7 CustomInputPrompt control with Cancel button" WindowsPhoneGeek Expression Blend: "Silverlight Templated Image Button with two images" Loek van den Ouweland Shoutouts: Dave Campbell posted a write-up about the project he's on and the use of Sterling: Sterling Object-Oriented Database for ISO 1.0 Released!... Also see Jeremy Likness' post on the 1.0 release: Sterling Object-Oriented Database 1.0 RTM Not necessarily Silverlight, but darn cool, a great control by Sasha Barber: WPF : A Weird 3d based control snoutholder announced new content: Windows Phone 7 QuickStarts Live! From SilverlightCream.com: Silverlight Templated Image Button with two images Loek van den Ouweland has a video tutorial up for creating an ImageButton with a hover state... Expression Blend coolness, and check out the external links he has to their training site. Windows Phone 7 Performance Measurements – Emulator vs. Hardware Colin Eberhardt's latest is a popular post comparing performance metrics between the WP7 emulator and a real device. Mileage may vary, but I'm pretty sure the overall results are conculsive, and should help the way you view your app as you're building in the emulator. WP7: WebClient vs HttpWebRequest Rudi Grobler's latest is a discussion of WebClient and HttpWebRequest, gives coding examples of each plus discussion of why you may choose one over the other... and pay attention to his comment about mobile providers. A Blendable Windows Phone 7 / Silverlight clipping behavior Joost van Schaik posted this WP7/Silverlight clipping behavior he developed because all the other solutions were not blendable. Another really useful piece of code from Joost! Blend Bits 22–Being Stylish Mike Taulty has 3 more episodes in his Blend Bits series... first up is on one Styles... explicit, implicit, inheriting... you name it, he's covering it! Blend Bits 23–Templating Part 1 MIke Taulty then has the beginning of a series within his Blend Bits series on Templating. This is something you just have to either bite the bullet and go with Blend to do, or consume someone else's work. Mike shows us how to do it ourself by tweaking the visual aspects of a checkbox Blend Bits 24–Templating Part 2 In part 2 of the Templating series, Mike Taulty digs deeper into Blend and cracks open the Listbox control to take a bunch of the inner elements out for a spin... fun stuff and great tutorial, Mike! Silverlight Simple MVVM Commanding Deborah Kurata has another great MVVM post up... if you don't have your head wrapped around commanding yet, this is a good place to start that process... VB and C# as always. App Development for Windows Phone 7 101 David Kelley goes through the basics of producing a WP7 app both from the Silverlight and XNA side... good info and good external links to get you going. Copyable TextBlock for Windows Phone Peter Foot takes a look at the Copy/Paste functionality in WP7 and how to apply it to a TextBlock... which is NOT an out-of-the-box solution. How to deploy to, and debug, multiple instances of the Windows Phone 7 emulator Samuel Jack has a couple posts up this week... first is this clever one on running multiple copies of the emulator at once... too cool for debugging a multi-player game! Multi-player enabling my Windows Phone 7 game: Day 3 – The Server Side Samuel Jack's latest is a detailed look at his day 3 adventure of taking his multi-player game to WP7... lots of information and external links... what do you say, give him another day? :) WP7 CustomInputPrompt control with Cancel button WindowsPhoneGeek has a couple more posts up... first is this "CustomInputPrompt" control based off the InputPrompt from Coding4Fun. Implementing Windows Phone 7 DataTemplateSelector and CustomDataTemplateSelector In his latest post, WindowsPhoneGeek writes a DataTemplateSelector to allow different data templates for different list elements based on the type of the element. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD)

  - by swafbrother

  UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD) Hello, I'm having trouble setting up a dual-boot (Ubuntu 12.04 LTS and Windows 8.1) in my ASUS K55VM laptop's hard drive disk (500 GB). I was mostly following tutorials for doing this, but at some point something has gone wrong. Up to now, I have followed these steps: I formatted my HDD into GPT. I clean-installed Windows 8.1. I didn't prevent Windows from choosing the partitions to use and it created these partitions: A Recovery partition (sda1). An EFI System Partition (sda2). A Microsoft Reserved Partition (sda3). A Windows Data Partition or C drive (sda4). I reduced the Windows Data Partition via Windows' Disk Management. I made a bootable USB Stick with Ubuntu 12.04 LTS from ISO, using Universal USB Installer. I created these partitions for Ubuntu: A Boot partition, mounted at /boot (sda5). A Root partition, mounted at / (sda6). A Swap partition (sda7). In Device for boot loader installation I chose: /dev/sda. Then, when I rebooted, it went straight into Ubuntu. So I installed Boot-Repair, and clicked on Recommended Repair. It automatically did its job without asking for anything. I rebooted and Grub showed up, with a lot of options. At this point I had a decent dual-boot setup; Ubuntu and both Windows entries worked fine: Ubuntu. Windows Boot UEFI Loader. Windows UEFI bkpbootmgfw.efi. I executed this command: sudo grub-install --force /dev/sda5. Then I tried to make Windows 8.1's Boot Manager the main boot manager, so that I could choose which OS to boot into from a menu. I downloaded EasyBCD on Windows. It showed 2 Ubuntu entries and 1 Windows entry. I went into BCD Deployment tab and clicked on Write MBR. At this point, I went into BIOS and made Windows Boot Manager the first boot option. When I rebooted, I got a black screen with the message efidisk read error, and then (I guess) it switched to the next boot option, which is Ubuntu, resulting in Grub showing up. From Grub, Ubuntu entry is working and so are both Windows entries. If I choose Ubuntu, it normally boots into Ubuntu. But if I choose Windows, it goes into Windows' boot manager. In Windows' boot manager, a menu shows up: Ubuntu. Ubuntu. Windows 8.1. If I choose Windows, it boots into Windows without any problem. If I choose Ubuntu, it boots into Grub (back to step 14). Here's my BootInfo Summary: http://paste.ubuntu.com/6698171/ Windows Boot Manager is clearly not working as expected; I can't directly boot into it and I can't boot into it from BIOS either (efidisk read error again). If I want to boot into Windows I need to boot into Grub first, which is the opposite of what I wanted. I need help at this point. What is the best thing I can do? Is there a more reliable and/or simpler way of acomplishing a satisfying dual-boot for this situation? Can someone provide a way for going back to step 8, where I had a more efficient dual-boot setup? If only I could undo what I did with Easy BCD and skip Windows' Boot Menu... Can someone provide a way to fix this mess? Thanks in advance and sorry for the length of this, I wanted to be exhaustive.

  Read the article

• How to detect UTF-8-based encoded strings [closed]

  - by Diego Sendra

  A customer of asked us to build him a multi-language based support VB6 scraper, for which we had the need to detect UTF-8 based encoded strings to decode it later for proper displaying in application UI. It's necessary to point out that this need arises based on VB6 limitations to natively support UTF-8 in its controls, contrary to what it happens in .NET where you can tell a control that it should expect UTF-8 encoding. VB6 natively supports ISO 8859-1 and/or Windows-1252 encodings only, for which textboxes, dropdowns, listview controls, others can't be defined to natively support/expect UTF-8 as you can do in .NET considering what we just explained; so we would see weird symbols such as é, è among others, making it a whole mess at the time of displaying. So, next function contains whole UTF-8 encoded punctuation marks and symbols from languages like Spanish, Italian, German, Portuguese, French and others, based on an excellent UTF-8 based list we got from this link - Ref. http://home.telfort.nl/~t876506/utf8tbl.html Basically, the function compares if each and one of the listed UTF-8 encoded sentences, separated by | (pipe) are found in our passed string making a substring search first. Whether it's not found, it makes an alternative ASCII value based search to get a match. Say, a string like "Societé" (Society in english) would return FALSE through calling isUTF8("Societé") while it would return TRUE when calling isUTF8("SocietÈ") since È is the UTF-8 encoded representation of é. Once you got it TRUE or FALSE, you can decode the string through DecodeUTF8() function for properly displaying it, a function we found somewhere else time ago and also included in this post. Function isUTF8(ByVal ptstr As String) Dim tUTFencoded As String Dim tUTFencodedaux Dim tUTFencodedASCII As String Dim ptstrASCII As String Dim iaux, iaux2 As Integer Dim ffound As Boolean ffound = False ptstrASCII = "" For iaux = 1 To Len(ptstr) ptstrASCII = ptstrASCII & Asc(Mid(ptstr, iaux, 1)) & "|" Next tUTFencoded = "Ä|Ã…|Ç|É|Ñ|Ö|ÃŒ|á|Ã|â|ä|ã|Ã¥|ç|é|è|ê|ë|í|ì|î|ï|ñ|ó|ò|ô|ö|õ|ú|ù|û|ü|â€|°|¢|£|§|•|¶|ß|®|©|â„¢|´|¨|â‰|Æ|Ø|∞|±|≤|≥|Â¥|µ|∂|∑|âˆ|Ï€|∫|ª|º|Ω|æ|ø|¿|¡|¬|√|Æ’|≈|∆|«|»|…|Â|À|Ã|Õ|Å’|Å“|–|—|“|â€|‘|’|÷|â—Š|ÿ|Ÿ|â„|€|‹|›|ï¬|fl|‡|·|‚|„|‰|Â|Ú|Ã|Ë|È|Ã|ÃŽ|Ã|ÃŒ|Ó|Ô||Ã’|Ú|Û|Ù|ı|ˆ|Ëœ|¯|˘|Ë™|Ëš|¸|Ë|Ë›|ˇ" & _ "Å|Å¡|¦|²|³|¹|¼|½|¾|Ã|×|Ã|Þ|ð|ý|þ" & _ "â‰|∞|≤|≥|∂|∑|âˆ|Ï€|∫|Ω|√|≈|∆|â—Š|â„|ï¬|fl||ı|˘|Ë™|Ëš|Ë|Ë›|ˇ" tUTFencodedaux = Split(tUTFencoded, "|") If UBound(tUTFencodedaux) > 0 Then iaux = 0 Do While Not ffound And Not iaux > UBound(tUTFencodedaux) If InStr(1, ptstr, tUTFencodedaux(iaux), vbTextCompare) > 0 Then ffound = True End If If Not ffound Then 'ASCII numeric search tUTFencodedASCII = "" For iaux2 = 1 To Len(tUTFencodedaux(iaux)) 'gets ASCII numeric sequence tUTFencodedASCII = tUTFencodedASCII & Asc(Mid(tUTFencodedaux(iaux), iaux2, 1)) & "|" Next 'tUTFencodedASCII = Left(tUTFencodedASCII, Len(tUTFencodedASCII) - 1) 'compares numeric sequences If InStr(1, ptstrASCII, tUTFencodedASCII) > 0 Then ffound = True End If End If iaux = iaux + 1 Loop End If isUTF8 = ffound End Function Function DecodeUTF8(s) Dim i Dim c Dim n s = s & " " i = 1 Do While i <= Len(s) c = Asc(Mid(s, i, 1)) If c And &H80 Then n = 1 Do While i + n < Len(s) If (Asc(Mid(s, i + n, 1)) And &HC0) <> &H80 Then Exit Do End If n = n + 1 Loop If n = 2 And ((c And &HE0) = &HC0) Then c = Asc(Mid(s, i + 1, 1)) + &H40 * (c And &H1) Else c = 191 End If s = Left(s, i - 1) + Chr(c) + Mid(s, i + n) End If i = i + 1 Loop DecodeUTF8 = s End Function

  Read the article

• Interrupted Upgrade from 11.10 to 12.04

  - by Tamil

  My upgrade using alternative iso from 11.10 to 12.04 got interrupted and I had to hard restart my machine. Now I feel that everything is recovered except my already installed packages like vim. How do I backup my home folder for fresh installation of ubuntu? Following are the errors I'm facing I couldn't mark any package for re-installation in synaptic or remove and install too. output of sudo apt-get install vim Building dependency tree Reading state information... Done Package vim is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'vim' has no installation candidate If I try installing it from synaptic I get apache2.2-common: Package apache2.2-common has no available version, but exists in the database. This typically means that the package was mentioned in a dependency and never uploaded, has been obsoleted or is not available with the contents of sources.list my sources.list file # added by the release upgrader # deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120822.4)]/ precise main restricted # added by the release upgrader # # deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120822.4)]/ precise main restricted # deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release amd64 (20110427.1)]/ natty main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse # deb-src http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu natty partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main # deb http://tamil.3758_gmail.com:[email protected]/free unstable main # disabled on upgrade to oneiric # deb http://debian.datastax.com/natty oneiric main # disabled on upgrade to oneiric sudo apt-get update Err http://archive.ubuntu.com precise InRelease Err http://archive.canonical.com precise InRelease Err http://archive.ubuntu.com precise-updates InRelease Err http://archive.ubuntu.com precise-security InRelease Err http://extras.ubuntu.com precise InRelease Err http://archive.canonical.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise-updates Release.gpg Unable to connect to 172.16.140.249:3142: Err http://extras.ubuntu.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise-security Release.gpg Unable to connect to 172.16.140.249:3142: W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise/InRelease

  Read the article

• Terminal Colors Not Working

  - by Matt Fordham

  I am accessing an Ubuntu 10.04.2 LTS server via SSH from OSX. Recently the colors stopped working. I think it happened while I was installing/troubleshooting RVM, but I am not positive. In .bashrc I uncommeneted force_color_prompt=yes, and when I run env | grep TERM I get TERM=xterm-color. But still no colors. Any ideas? Thanks! Here is the output of cat .bashrc # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' alias dir='dir --color=auto' alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi [[ -s "/usr/local/rvm/scripts/rvm" ]] && . "/usr/local/rvm/scripts/rvm"

  Read the article

• Moving from Silverlight 4 Beta to RC - Part 1

  The other day I had finished up my Task-It Webinar, written a few blog posts, and knew the time had come to move from my Silverlight 4 Beta environment up to the latest RC (release candidate) bits that were released last Monday. What disappointed me when I went to the Silverlight 4 Information Page is that it told me what to install, but not what to uninstall first. Uninstalling I'm not entirely sure if I had to uninstall anything, or if installing the new stuff would just work, but in poking around the web I found posts stating that you must uninstall the following items first. Unfortunately I'm going by memory here and have not been able to find my way back to the magic page I found in the myriad of posts that I went through: Microsoft VisualStudio Beta 2 Microsoft .NET Framework 4 Extended (apparently this must be done *before* the next one) Microsoft .NET Framework Client Profile Microsoft Silverlight 4 Tools for Visual Studio 2010 WCF RIA Services Preview for Visual Studio 2010 While I was at it, I removed a bunch of other stuff, like Blend 3, Blend 4, the SDK's associated with them, and a bunch other stuff that was old. Of course, I didn't really want/need to keep any Silverlight 3 stuff around as I am developing Task-It in Silverlight 4. If I need a Silverlight 3 environment at some point I'll set it up in a virtual environment. NOTE: One thing that I did not uninstall is the Microsoft Silverlight 4 Toolkit November 2009. The reason is that they have not released the March version yet, so if you uninstall this, youll end up having to reinstall it. Installing OK, now that I had all of that old stuff off my machine, now it was time to get the new stuff. For this part I liked Tim Heuer's post, A Guide to What has Changed in Silverlight 4 RC better than the Silverlight 4 Information Page. VisualStudio 2010 RC - I installed Ultimate, but you may not need that version. No harm, it's free for now anyway. I downloaded the .exe and the 3 .rar files, then ran the .exe. I then extracted the contents of the ISO (using WinZip) to a new directory, and now had Setup.exe, a bunch of .cab files and some other assorted stuff. I simply ran Setup.exe and chose custom install (only because I wanted to uncheck Visual C++...I don't really have a need for that) Silverlight 4 Tools for Visual Studio 2010 - As mentioned in Tim's blog post, this installs this installs Silverlight developer runtime, SDK, tools, and this installs Silverlight developer runtime, SDK, tools, and WCF RIA Services. WCF RIA Services Toolkit March 2010 - I'm not sure if/when I'll need any of this stuff, but no harm in installing it anyway. Expression Blend 4 beta - Only if you plan to use Blend, which I do. Windows Phone Developer Tools - Only if you are interested in playing with Windows Phone 7 development. Wrap Up Hopefully I got those steps right. If anyone finds anything I've missed, please just add a comment to this post and I'll update it accordingly.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Take Snapshots of Your Favorite Movie Scenes in VLC

  - by DigitalGeekery

  Have you ever wanted to grab a screenshot of your favorite TV or movie scene? Today we’ll show you how to do so with VLC Media Player. If you don’t have it already, download and install the latest version of VLC (link below). Start playing your movie, and to grab a snapshot, select Video from the menu and click Snapshot.   When you take a snapshot, by default a preview is displayed at the top left and the folder where the file is saved is briefly displayed on the screen. If you enable the Advanced Controls, you can take a snapshot with a click of a button, and advance the video frame by frame to get a more accurate shot. To enable the Advanced Controls, select View and Advanced Controls.   You’ll see the Advanced Controls buttons appear below the slider. Now just click on the Snapshot button to grab an image.   You can more easily control the frame you wish to grab by pressing the Frame by Frame button. You can pause the movie when it is near the perfect spot for your snapshot, and then press the Frame by Frame button to advance a single frame at a time. By default, the snapshots are saved as PNG files in your My Pictures folder in Windows. You can change those setting in the Preferences. First, you’ll need to select All under Show settings at the bottom. Then click on Video on the left. Scroll down a bit and you’ll see the Snapshot section. Here you can change the format from PNG to JPG, change the directory to which the snapshots are stored, turn on and off the preview, and change the filename prefix. Click Save when finished.   Now you have nice screenshots of your favorite movie to display as you wish…such as a Desktop Background!   VLC is an excellent media player that runs on Windows, Mac, and Linux. In addition to playing almost any media file, it also makes grabbing screenshots of your videos a breeze. Want to know more about VLC? Check out some of our previous articles like how to rip DVDs and how to set a video as your desktop wallpaper. Download the Latest version of VLC Similar Articles Productive Geek Tips Desktop Fun: Rural Scenes WallpapersAutomatically Mount and View ISO files in Windows 7 Media CenterHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie LibraryQuickly Find Movies to Watch at Hello Movies TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

  Read the article

• Teminal non-responsive on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

• How to fix: Ubuntu 12.04 reboots after loading with elilo

  - by Casey

  I have an HP p6-2120 with CPU: AMD A6-3620 APU with Radeon Graphics RAM: 6GB BIOS: HO2_710.ROM v7.10 [AMI v7.10 4/19/2012] Disk: SATA1 (/dev/sda) - 1 TB (windows) Disk: SATA2 (/dev/sdb) - 1 TB partitioned using "parted -a optimal /dev/sdb" as follows: .. 1049KB 201MB FAT32 boot flag set .. 201MB 60GB ext2 (/) .. 68GB 78GB linux-swap(v1) (swap) .. 78GB 790GB ext4 (/home) .. - rest is "free" space reserved for other purposes (eventually) ubuntu: 12.04.1 LTS [specifically: Release 12.04 (precise) 64-bit] kernel: linux 3.2.0-29-generic I created a bootable EFI USB from the ISO (64-bit) which I downloaded. I can run and install from the USB without any problems. The BIOS is an EFI bios that appears to be capable of booting in either EFI or Legacy mode. Initially, I did the "standard" install with NOTHING on disk2, and let the installer configure everything. The net result of this was that when I started the computer and forced it into "boot" menu mode, it DOES NOT recognize SATA2 as an EFI drive, and when I attempt to "legacy" boot from it, I get the message "ERROR: No Boot Disk has been detected." The "standard" install created one large partition that consumed the entire disk. At that point, I manually partitioned the disk (using sudo parted -a optimal /dev/sdb) as described above. I selected the "other" install, and changed the /dev/sdb1 to "bios_grub", /dev/sdb2 as "/" (ext4), /dev/sdb3 as swap, and /dev/sdb4 as "/home". [Note: fearing that possibly elilo did not recognize ext4, I switched /dev/sdb2 to ext2 and re-insalled] The net result was that the install appeared to trash the /dev/sdb1 partition so that it was NOT readable by anything. I re-formated /dev/sdb1 as FAT32 and set the boot flag. I repeated the install ignoring the messages about no bios_grub partition. After several attempts to get GRUB2 to work, I switched to elilo. I downloaded the most recent version and copied it (elilo-3.14-ia64.efi) to /dev/sdb1/efi/boot/bootx64.efi. (The BIOS boot loader did not recognize it either as elilo-3.14.ia64.efi or as elilo.efi. Based on the advice in one of the web-pages I found, I renamed it to bootx64.efi. This worked.) In that same directory (/efi/boot), I copied the file pointed to the link in /dev/sdb2/vmlinuz to /efi/boot/vmlinuz, and the file pointed to the link in /dev/sdb2/initrd.img to /efi/boot/initrd.img. I created an elilo.conf file as follows: timeout=5000 prompt default=linux-boot image=vmlinuz label=linux-boot read-only initrd=initrd.img root=/dev/sdb2 The /efi/boot directory contains 4 files: bootx64.efi elilo.conf vmlinuz initrd.img When I power-cycle the computer and force the boot menu, drive2 shows up as an EFI bootable drive. When I select it, I get the elilo prompt. Pressing , it appears to load the kernal (I have tried it with verbose=5, and there is a long string of messages with the final one a command line to load the kernel and a series of several dots that fly by) then the screen goes blank, and it reboots the computer. [Note: I have also tried substituting the UUID as found in the /etc/fstab of the installed system for the root directory. This had no effect.] This is a brief synopsis of several nights of fiddling with this. I would deeply appreciate any help you can give.

  Read the article

• Teminal hands on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

• Server-Sent Events using GlassFish (TOTD #179)

  - by arungupta

  Bhakti blogged about Server-Sent Events on GlassFish and I've been planning to try it out for past some days. Finally, I took some time out today to learn about it and build a simplistic example showcasing the touch points. Server-Sent Events is developed as part of HTML5 specification and provides push notifications from a server to a browser client in the form of DOM events. It is defined as a cross-browser JavaScript API called EventSource. The client creates an EventSource by requesting a particular URL and registers an onmessage event listener to receive the event notifications. This can be done as shown var url = 'http://' + document.location.host + '/glassfish-sse/simple';eventSource = new EventSource(url);eventSource.onmessage = function (event) { var theParagraph = document.createElement('p'); theParagraph.innerHTML = event.data.toString(); document.body.appendChild(theParagraph);} This code subscribes to a URL, receives the data in the event listener, adds it to a HTML paragraph element, and displays it in the document. This is where you'll parse JSON and other processing to display if some other data format is received from the URL. The URL to which the EventSource is subscribed to is updated on the server side and there are multipe ways to do that. GlassFish 4.0 provide support for Server-Sent Events and it can be achieved registering a handler as shown below: @ServerSentEvent("/simple")public class MySimpleHandler extends ServerSentEventHandler { public void sendMessage(String data) { try { connection.sendMessage(data); } catch (IOException ex) { . . . } }} And then events can be sent to this handler using a singleton session bean as shown: @Startup@Statelesspublic class SimpleEvent { @Inject @ServerSentEventContext("/simple") ServerSentEventHandlerContext<MySimpleHandler> simpleHandlers; @Schedule(hour="*", minute="*", second="*/10") public void sendDate() { for(MySimpleHandler handler : simpleHandlers.getHandlers()) { handler.sendMessage(new Date().toString()); } }} This stateless session bean injects ServerSentEventHandlers listening on "/simple" path. Note, there may be multiple handlers listening on this path. The sendDate method triggers every 10 seconds and send the current timestamp to all the handlers. The client side browser simply displays the string. The HTTP request headers look like: Accept: text/event-streamAccept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3Accept-Encoding: gzip,deflate,sdchAccept-Language: en-US,en;q=0.8Cache-Control: no-cacheConnection: keep-aliveCookie: JSESSIONID=97ff28773ea6a085e11131acf47bHost: localhost:8080Referer: http://localhost:8080/glassfish-sse/faces/index2.xhtmlUser-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.54 Safari/536.5 And the response headers as: Content-Type: text/event-streamDate: Thu, 14 Jun 2012 21:16:10 GMTServer: GlassFish Server Open Source Edition 4.0Transfer-Encoding: chunkedX-Powered-By: Servlet/3.0 JSP/2.2 (GlassFish Server Open Source Edition 4.0 Java/Apple Inc./1.6) Notice, the MIME type of the messages from server to the client is text/event-stream and that is defined by the specification. The code in Bhakti's blog can be further simplified by using the recently-introduced Twitter API for Java as shown below: @Schedule(hour="*", minute="*", second="*/10") public void sendTweets() { for(MyTwitterHandler handler : twitterHandler.getHandlers()) { String result = twitter.search("glassfish", String.class); handler.sendMessage(result); }} The complete source explained in this blog can be downloaded here and tried on GlassFish 4.0 build 34. The latest promoted build can be downloaded from here and the complete source code for the API and implementation is here. I tried this sample on Chrome Version 19.0.1084.54 on Mac OS X 10.7.3.

  Read the article

• Changing the Operating System with only Ubuntu installed

  - by Games Brainiac

  I really wanted to dive into the world of Open Source operating systems, so I downloaded the latest version of Ubuntu (13.10), and installed it on a clean(no operating system installed, absolutely nothing) Lenovo ThinkPad machine. After a few days, I wanted to try out a different Operating System (Elementary OS). I downloaded the ISO file, burned it to a USB, tested that the USB booted from a different computer (I have 2, one is the Lenovo, the other a HP). I was able to get the bootscreen, and everything worked like a charm after I set the BIOS to boot from USB Disk Drive instead of HD. After this, I went back to Lenovo, and tried to open up the boot menu, by pressing F12, so that I could load from a temporary device. To my surprise, nothing but the HD was listed. There was no Optical Drive, No USB Drive, absolutely nothing. So, I thought that these devices were probably disabled. So I went into my BIOS and checked to see what was the case. I saw that all my devices were enabled. USB and all the other devices such as network cable and the rest were all enabled. So, I thought this probably had something to do wit UEFI and Legacy Boot options. So, I made sure that both were enabled. This did not solve the problem either. Again, I got nothing but the option to boot from my Hard Disk. I thought the USB had to be at fault. I tried different ports, but to no avail. Next, I tried with a Live CD, which had Ubuntu on it. This failed too. I simply could not boot from anything other than my hard disk. Okay, so at this point, I was pretty desperate, so I installed Boot-Repair through: sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install boot-repair What this did is lead me to GRUB. Ideally, its just a screen that gives me the option to load from Ubuntu or Advanced Settings. The Advanced settings had nothing but Ubuntu options in it. So, I kept on pressing ESC and that led me to the the grub console, and thats where I am right now with my Lenovo. I've also tried updating the BIOS, but Lenovo only has packages for Red Hat and Windows. So, a dead end there too. Right now, I need to know if there is any way that I can just delete everything from my Lenovo? I want to revert it back to its blank factory condition. How can I achieve this? I have tried to elaborate my problem as best I could. If there is any important information that I've missed out, please do not hesitate to leave a comment. I would have included some screen shots, but BIOS screen shots are a little hard to manage. However, I can provide a camera Image of the boot screen if needed (doing that as we speak).

  Read the article

• PHP Codeigniter error: call to undefined method ci_db_mysql_driver::result()

  - by Ronnie

  I was trying to create an xml response using codeigniter. The following error gets thrown when i run the code. This page contains the following errors: error on line 1 at column 48: Extra content at the end of the document <?php class Api extends CI_Controller{ function index() { $this->load->helper('url', 'xml', 'security'); echo '<em>oops! no parameters selected.</em>'; } function authorize($email = 'blank', $password = 'blank') { header ("content-type: text/xml"); echo '<?xml version="1.0" encoding="ISO-8859-1"?>'; echo '<node>'; if ($email == 'blank' AND $password == 'blank') { echo '<response>failed</response>'; } else { $this->db->where('email_id', $email); $this->db->limit(1); $query = $this->db->from('lp_user_master'); $this->get(); $count = $this->db->count_all_results(); if ($count > 0) { foreach ($query->result() as $row){ echo '<ip>'.$row->title.'</ip>'; } } } echo '</node>'; } } ?>

  Read the article

• Invalid byte 1 of 1-byte UTF-8 sequence

  - by user275886

  I have a MyFaces Facelets application, where the page coding is a bit rugged. Anyway, it's developed with Eclipse and built with Ant, and kindof runs ok in Tomcat 2.0.26. So far so good. Now, I'd rather build with Maven, so I made a couple of pom-files, opened them in Netbeans and built, and now I have a war file that deploys ok. However, on any facelet page it barfs out with com.sun.org.apache.xerces.internal.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence. at com.sun.org.apache.xerces.internal.impl.io.UTF8Reader.invalidByte(UTF8Reader.java:684) at com.sun.org.apache.xerces.internal.impl.io.UTF8Reader.read(UTF8Reader.java:554) at com.sun.org.apache.xerces.internal.impl.XMLEntityScanner.load(XMLEntityScanner.java:1742) So, I've tried a lot of different things, and the application actually run simple pages without facelet stuff. But, everything runs if I just build with Ant instead ... So my question is: What's the most likely difference between an ant build and a maven build that may cause this? It also seems that even though I've configured for UTF-8 in Netbeans and pom-files, Netbeans eventually ends up reporting the facelet files as ISO-8859-1 after some editing. I've made sure that most central libs are of same version (especially xerces 2.3.0), I've added an encoding servlet filter that had no effect. And, I'd rather fix the maven build and keep the buggy pages, than the other way around ... it's my intention to introduce Naven, not fix buggy pages.

  Read the article

• cannot load JSTL taglib within embedded Jetty server

  - by fthompson

  I am writing a web application that runs within an embedded Jetty instance. When I attempt to execute a JSTL statement, I receive the following exception: org.apache.jasper.JasperException: /index.jsp(1,63) PWC6188: The absolute uri: http://java.sun.com/jsp/jstl/core cannot be resolved in either web.xml or the jar files deployed with this application I have the following jars on the classpath ant-1.6.5.jar ant-1.7.1.jar ant-launcher-1.7.1.jar core-3.1.1.jar jetty-6.1.22.jar jetty-util-6.1.22.jar jsp-2.1-6.1.14.jar jsp-api-2.1.jar jstl-1.2.jar servlet-api-2.5-20081211.jar servlet-api-2.5-6.1.14.jar standard-1.1.2.jar My web.xml looks like this: <?xml version="1.0" encoding="ISO-8859-1"?> <web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee h77p://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4"> <display-name>test</display-name> </web-app> My code looks like this: <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %> <html> <body> <h2>Hello World!</h2> <%= new java.util.Date() %><br/> ${1+2}<br/> <c:out var="${5+9}"/><br/> </body> </html> I started my embedded Jetty server like this: Server server = new Server(80); WebAppContext context = new WebAppContext("pig-1.0-SNAPSHOT.war","/"); server.addHandler(context); server.start(); I spent the past two days experimenting with various combinations of jar files, web.xml configurations, and tag library declarations, but to no avail. How can I get an embedded Jetty server up and running with full JSTL support?

  Read the article

• jax-ws on glassfish3 init method

  - by Alex

  Hi all, I've created simple jax-ws (anotated Java 6 class to web service) service and deploied it on glassfish v3. The web.xml <?xml version="1.0" encoding="ISO-8859-1"?> <web-app> <servlet> <servlet-name>MyServiceName</servlet-name> <description>Blablabla</description> <servlet-class>com.foo-bar.somepackage.TheService</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>MyServiceName</servlet-name> <url-pattern>/MyServiceName</url-pattern> </servlet-mapping> <session-config> <session-timeout>30</session-timeout> </session-config> </web-app> There is no sun-jaxws.xml in the war. The service works fine but I have 2 issues: I'm using apache common configuration package to read my configuration, so i have init function that calls configuration stuff. 1. How can I configure init method for jaxws service (like i can do for the servlets for example) 2. the load on startup parameter is not affecting the service, I see that for every request init function called again (and c-tor). How can I set scope for my service? Thanks a lot,

  Read the article

• MacPorts - Installing Port, Dependencies Failed

  - by Louis

  I am attempting to install xulrunner on OSX 10.6.3 using the following: sudo port install xulrunner However, I am receiving the following error: nat-10-200-136-126:phoneyc-new $ sudo port install xulrunner ---> Computing dependencies for xulrunner ---> Activating zlib @1.2.5_0 Error: The following dependencies failed to build: gconf dbus-glib glib2 zlib gtk-doc docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl gnome-doc-utils iso-codes libxslt libxml2 p5-xml-parser py26-libxml2 python26 bzip2 db46 gdbm openssl readline sqlite3 tk Xft2 fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-util-macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans xorg-renderproto tcl xorg-libXScrnSaver xorg-libXext xorg-scrnsaverproto rarian getopt intltool gnome-common p5-getopt-long p5-pathtools p5-scalar-list-utils gtk2 atk cairo libpixman libpng jasper jpeg pango shared-mime-info tiff xorg-libXcomposite xorg-compositeproto xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto orbit2 libidl policykit heimdal lcms libcanberra gstreamer bison flex gzip texinfo lzmautils libvorbis libogg libnotify nss xorg-libXt xorg-libsm xorg-libice Error: Status 1 encountered during processing. Before reporting a bug, first run the command again with the -d flag to get complete output. nat-10-200-136-126:phoneyc-new$ I am unsure how to correct this issue, so any help would be much appreciated!

  Read the article

• Login Facebook using Web-Harvest

  - by parin

  I tried to login Facebook using Web-Harvest. I used the following xml code to login < ?xml version="1.0" encoding="UTF-8"? < config charset="ISO-8859-1" < file action="write" path="homepage.xml" charset="UTF-8" < html-to-xml < http method="post" url="http://www.facebook.com/login.php" cookie-policy="browser" < http-param name="email"myemail < http-param name="pass"mypassword < /http < /html-to-xml < /file The homepage.xml (output) file contains the xml code for the login page of facebook along with the following lines: < h2 class="main_message" id="standard_error"Cookies Required< /h2< p class="sub_message" id="standard_explanation"Cookies are not enabled on your browser. Please adjust this in your security preferences before continuing.< /p I tried all the allowed values for cookie-policy in the http processor of the xml code but was unsuccessful.

  Read the article

• PHP: Detect encoding and make everything UTF-8

  - by marco92w

  Hello! I'm reading out lots of texts from various RSS feeds and inserting them into my database. Of course, there are several different character encodings used in the feeds, e.g. UTF-8 and ISO-8859-1. Unfortunately, there are sometimes problems with the encodings of the texts. Example: 1) The "ß" in "Fußball" should look like this in my database: "Ÿ". If it is a "Ÿ", it is displayed correctly. 2) Sometimes, the "ß" in "Fußball" looks like this in my database: "ß". Then it is displayed wrongly, of course. 3) In other cases, the "ß" is saved as a "ß" - so without any change. Then it is also displayed wrongly. What can I do to avoid the cases 2 and 3? How can I make everything the same encoding, preferably UTF-8? When must I use utf8_encode(), when must I use utf8_decode() (it's clear what the effect is but when must I use the functions?) and when must I do nothing with the input? Can you help me and tell me how to make everything the same encoding? Perhaps with the function mb-detect-encoding()? Can I write a function for this? So my problems are: 1) How to find out what encoding the text uses 2) How to convert it to UTF-8 - whatever the old encoding is Thanks in advance! EDIT: Would a function like this work? function correct_encoding($text) { $current_encoding = mb_detect_encoding($text, 'auto'); $text = iconv($current_encoding, 'UTF-8', $text); return $text; } I've tested it but it doesn't work. What's wrong with it?

  Read the article

• Diff between <head id="Head1" runat="server"> and <asp:ContentPlaceHolder runat="server" ID="HeadCon

  - by justSteve

  Looking for an better understanding of how an mvc project should define javascript and css includes. I'm working with sample code where includes are defined like: <head id="Head1" runat="server"> <title><asp:ContentPlaceHolder ID="TitleContent" runat="server" />Affiliate Checkout</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <meta http-equiv="pragma" content="no-cache"> <script type="text/javascript" src="/Scripts/jquery.js"></script> <script type="text/javascript" src="/Scripts/jquery-ui-1.7.2.custom.min.js"></script> . . . <asp:ContentPlaceHolder runat="server" ID="HeadContent"></asp:ContentPlaceHolder> </head> I'm reading that to be that _all pages looking at this MasterPage will get jquery and jqueryUI and, additionally, each page will have the opportunity to add head elements thankx to the content placeholder HeadContent tag. The specific problem i'm troubleshooting is an instance where my rendered page is not including the 'prama no-cache' tag - as you see, it's defined in the upper level header section. Other .js and .css elements are making it into the rendered page so it very confusing to see that the no-cache tag isn't. When execute a 'View Generated Source' - the 'charset' is present the 'no-cache' is not.

  Read the article

• Why is my mssql query failing?

  - by Eric Reynolds

  connect(); $arr = mssql_fetch_assoc(mssql_query("SELECT Applications.ProductName, Applications.ProductVersion, Applications.ProductSize, Applications.Description, Applications.ProductKey, Applications.ProductKeyID, Applications.AutomatedInstaller, Applications.AutomatedInstallerName, Applications.ISO, Applications.ISOName, Applications.Internet, Applications.InternetURL, Applications.DatePublished, Applications.LicenseID, Applications.InstallationGuide, Vendors.VendorName FROM Applications INNER JOIN Vendors ON Applications.VendorID = Vendors.VendorID WHERE ApplicationID = ".$ApplicationID)); $query1 = mssql_query("SELECT Issues.AppID, Issues.KnownIssues FROM Issues WHERE Issues.AppID=".$ApplicationID); $issues = mssql_fetch_assoc($query1); $query2 = mssql_query("SELECT ApplicationInfo.AppID, ApplicationInfo.Support_Status, ApplicationInfo.UD_Training, ApplicationInfo.AtomicTraining, ApplicationInfo.VendorURL FROM software.software_dbo.ApplicationInfo WHERE ApplicationInfo.AppID = ".$ApplicationID); $row = mssql_fetch_assoc($query2); function connect(){ $connect = mssql_connect(DBSERVER, DBO, DBPW) or die("Unable to connect to server"); $selected = mssql_select_db(DBNAME, $connect) or die("Unable to connect to database"); return $connect; } Above is the code. The first query/fetch_assoc works perfectly fine, however the next 2 queries fail and I cannot figure out why. Here is the error statement that shows up from php: Warning: mssql_query() [function.mssql-query]: message: Invalid object name 'Issues'. (severity 16) in /srv/www/htdocs/agreement.php on line 47 Warning: mssql_query() [function.mssql-query]: General SQL Server error: Check messages from the SQL Server (severity 16) in /srv/www/htdocs/agreement.php on line 47 Warning: mssql_query() [function.mssql-query]: Query failed in /srv/www/htdocs/agreement.php on line 47 Warning: mssql_fetch_assoc(): supplied argument is not a valid MS SQL-result resource in /srv/www/htdocs/agreement.php on line 48 Warning: mssql_query() [function.mssql-query]: message: Invalid object name 'software.software_dbo.ApplicationInfo'. (severity 16) in /srv/www/htdocs/agreement.php on line 51 Warning: mssql_query() [function.mssql-query]: General SQL Server error: Check messages from the SQL Server (severity 16) in /srv/www/htdocs/agreement.php on line 51 Warning: mssql_query() [function.mssql-query]: Query failed in /srv/www/htdocs/agreement.php on line 51 Warning: mssql_fetch_assoc(): supplied argument is not a valid MS SQL-result resource in /srv/www/htdocs/agreement.php on line 52 The error clearly centers around the fact that the query is not executing. In my database I have a table called Issues and a table called ApplicationInfo so I am unsure why it is telling me that they are invalid objects. Any help would be appreciated. Thanks, Eric R.

  Read the article

• Will HttpResponse.Filter buffer the whole data before start the sending?

  - by vtortola

  Hi, An user posts this article about how to use HttpResponse.Filter to compress large amounts of data. But what will happen if I try to transfer a 4G file? will it load the whole file in memory in order to compress it? or otherwise it will compress it chunk by chunk? I mean, I'm doing this right now: public void GetFile(HttpResponse response) { String fileName = "example.iso"; response.ClearHeaders(); response.ClearContent(); response.ContentType = "application/octet-stream"; response.AppendHeader("Content-Disposition", "attachment; filename=" + fileName); response.AppendHeader("Content-Length", new FileInfo(fileName).Length.ToString()); using (FileStream fs = new FileStream(Path.Combine(HttpContext.Current.Server.MapPath("~/App_Data"), fileName), FileMode.Open)) using (DeflateStream ds = new DeflateStream(fs,CompressionMode.Compress)) { Byte[] buffer = new Byte[4096]; Int32 readed = 0; while ((readed = ds.Read(buffer, 0, buffer.Length)) > 0) { response.OutputStream.Write(buffer, 0, readed); response.Flush(); } } } So at the same time I'm reading, I'm compressing and sending it. Then I wanna know if HttpResponse do the same thing, or otherwise it will load the whole file in memory in order to compress it. Cheers.

  Read the article

• Extract known pattern substring from NSString (without regex)

  - by d11wtq

  I'm really tempted to drop RegexKit (or my own libpcre wrapper) into my project in order to do this, but before I do that I want to know how Cocoa developers manage to do half of this basic stuff without really convoluted code or without linking with RegexKit or another regular expression library. I find it gobsmacking that Cocoa does not include any regular expression matching features. I've so accustomed to using regular expressions for all kinds of things that I'm lost without them. I can do what I need without them, but the code would be rather convoluted. So, Cocoa devs, I ask you, what's the "Cocoa way" to do this... The problem is an everyday problem in programming as far as I'm concerned. Cocoa must have ways of doing this with the built-in features. Note that the position of the elements I want to match changes, and sometimes "quotes" are present. Whitespace is variable. Take the following strings: Content-Type: application/xml; charset=utf-8 Content-Type: text/html; charset="iso-8859-1" Content-Type: text/plain; charset=us-ascii Content-Type: text/plain; name="example.txt"; charset=utf-8 From all of these strings, how would you go about determining the mime type (e.g. text/plain) and the charset (e.g. utf-8) using just the built-in Cocoa classes? I'd end up performing a series of -rangeOfString: and substring calls, with conditional checks to deal with the optional quotes etc. Is there a way to do this with NSScanner? The NSScanner class seems to have a pretty naive API to me. Something like C's sscanf() that works for NSString objects would be an ideal fit. Most of my string parsing needs are simple such as this example so maybe regular expressions, while I'm accustomed to them, are overkill?

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >