Search Results

Search found 2095 results on 84 pages for 'mercurial hook'.

Page 69/84 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• Hard drive spark, can it be recovered?

  - by user163558

  Alright, so I was going to install Source Film Maker but I didn't have any space, so I decided to connect an HDD via an USB converter(image below). I shut down the machine, turned the PSU off, and connected via a Molex connector & the USB converter. I turned back on the PSU, no sparks or anything, everything normal, but when I turned on the machine, I heard some sizzing(lol?) and sparks flying and a little flame, but the PC was running fine. I pressed the power button instead pulling out the plug (I panicked) so it continued to short circuit for about 10 seconds. There's a very little part on the HDD that become ash, it's near the Molex connector and the circuit is a little black as well. I'm afraid that I will damage the HDD more so I didn't hook up the HDD after all. Do you think it's the PSU(came default with Cooler Master Elite 430, 500W) or it's the HDD(Samsung SP1203N)? P.S: I've attached the HDD same way before(like 3 months ago), and it worked. HDD burn: USB connector: Sorry for the bad image quality, taken with my phone.

  Read the article

• fastest SCM tool available for Embedded software development

  - by wrapperm

  Hi All, In my company, presently we are using Rational clearcase as the Software Configuration Management tool for our Embedded software development. The software is basically for Automobiles, to be specific for Engines (I dont think these information really matters). But I find Clearcase to be very slow is performing any the activities (accesing files, branching and labelling), in addition to which there are various other limitations. We have recently decided to research on some free & open source, distributed version control system which could be able to handle our large projects with speed and efficiency. This tool should be a full-fledged repository with complete history and full revision tracking capabilities, not dependent on network access or a central server. Branching and merging are fast and easy to do. It should have multisite development facility. With these above mentioned requirement, we have come up with some of the tools that are presently available in the market: GIT, Mercurial, Bazaar, Subversion, CVS, Perforce, and Visual SourceSafe. I need everybody's help in finding me an approrpiate SCM tool for me which meets the above mentioned requirements. Thanking you in Advance, Rahamath.

  Read the article

• 2 servers on 2 networks in same office

  - by irot

  Hello Gents, My office doesn't have a "server guy" in employ, so I'm stuck with having to fix server issues for now. There are 2 servers in our office, both are file/web servers only accessible via LAN. They are currently on the same network, so no issue there. Problem is, we recently got a static IP to use, but it's with a different ISP, so now we have 2 routers in our office. I would like to open one of the servers to the public as a web/FTP server. But if I hook a server up to the new router, users will no longer be able to access the files shared on that server (because they're on different networks). How can I go about making one server accessible to the public using the static IP line, but still able to share the files on it to the users connected to the other network? The server I want to make public is running Windows Server 2008, the other server Windows Server 2003. And as far as I know, IP addresses are assigned by the router. I'm just a developer, don't know much about networking. Thank you in advance.

  Read the article

• Can I get a domain controller not to act as DNS for the members?

  - by rsw

  Hi, Let me try to explain my current setup. I have one linux machine acting as DHCP and DNS (dhcpd3 and bind) in my network. This works fine, all computers I hook up to the network gets an IP address and proper DNS servers set. Let's call it 10.12.0.10 However, we also have a Windows Server 2003 Domain Controller in our network to which we add our Windows computers (running XP), let's call it 10.12.0.20. I noticed that when I run 'nslookup' on one of the windows machines, it says that the primary DNS is 10.12.0.20. This have not been much of a problem since: The Windows clients are stationary The Windows server in itself point out my real DHCP/DNS, since I can reach everything specified in it However, this turns out to be a problem when we use Laptops. They connect to the domain here and gets a DNS server, but when the user travels or connect the computer from home, we hit a problem. They are connected to their internet, but their DNS is 10.12.0.20 which they can't reach since they're at home and not at the office network. I solved this by removing the register key called "NameServer" with the value 10.12.0.20, but it gets set again whenever they logon to the domain the next time (when they get back to the office). Can I somehow make the computers take whatever DNS server they are handed when connecting to the internet or a home network, instead of always trying to reach the Domain Controller?

  Read the article

• Wireless connection drops when wired computer starts a game.

  - by Skadlig

  Starting this week I have had a strange problem on my network. Some background of my setup: Internet is provided by a adsl-modem. A D-link Dir-600 router is hooked up to to adsl-modem. My computer is hooked up to the router using a cat-5 cable. My wife's computer is hooked up using a wireless usb dongle, TP-Link TL-WN821N. Both computers use windows 7 64-bit home premium. Up until this week everything was normal, we could for instance play Dungeons & Dragons Online together without any network issues. Now every time I start DDO or any other network game, for instance L4D, the whole wireless network drops. I have confirmed that it's not just her computer using an Samsung Galaxy Spica android phone. Shutting down the game on my end restores the wireless connection automagicly. My wife can start DDO without the net dropping but if I plug in a wireless network card in my computer and start up the game the connection drops. So it seems like something my computer, and my computer only, does when starting a game makes the wireless connection write a sad note and kill it self but for the life of me I can't figure out what that might be. I could hook her computer up using cat-5 but I would prefer not to do that. Does anyone have any suggestions as to what the problem might be, what I can do to fix it or what I should do to get more data regarding what is happening?

  Read the article

• Are there any open source reseller packages?

  - by Tom Wright

  My department has just been given the right/responsibility to manage our own VPS. The idea being that the bureaucracy will be less for the many small web projects we run. Since each project will be managed by a different team, I was planning on approaching a shared hosting model. Are there any free pieces of software that would help automate the provision of resources each time a team request a new project? Most of the projects have identical requirements - basically LAMP - so it would be these resources that I would want provisioning (and de-provisioning, if that is a word) automatically. Ideally, there would also be a way to hook it into our LDAP authentication backend too, though I could probably make this sort of modification if necessary. Since we won't be charging our "client" however, we won't need the ability to generate invoices, handle payments, etc. etc. EDIT: Sample workflow Login authenticated against LDAP Username checked against admin group (not on central LDAP) Click 'new project' and enter project name User created on VPS with project name as username Apache virtual host created and subdomain (using project name) allocated FTP & MySQL users created

  Read the article

• Few questions about a good projector on my PC and tv?

  - by jasondavis

  I have always wanted a projector for my tv, satelite, cable, and even PC in a spare bedroom. Well it's more of a home office that I spend most my time in and the catch here is it is a small room. Room is only the standard 8foot tall. Room is about 13 feet wide on the wall where I would like to mount the project and the wall where the screen would be for it. So only about 13 feet away from projector to screen. I would like to know... 1) From experience or knowledge what would be a good projector I could hook up to my satelite box and also my PC? Cheaper is better in this case but I would still like the best image for my buck and something reliable. There is no sunlight in the room either to worry about. 2) From that distance of about 12-13 feet away, how big of a clear picture could I expect? 3) What kind of cables would I need to purchase and run through my attic to my cable/satelite receiver box as well as my PC? 4) These cables in question 3 would most likely need to be a good 15-20feet in length to reach, would I need anything special for that to work at those distances?

  Read the article

• Which source control paradigm and solution to embed in a custom editor application?

  - by Greg Harman

  I am building an application that manages a number of custom objects, which may be edited concurrently by multiple users (using different instances of the application). These objects have an underlying serialized representation, and my plan is to persist them (through my application UI) in an external source control system. Of course this implies that my application can check the current version of an object for updates, a merging interface for each object, etc. My question is what source control paradigm(s) and specific solution(s) to support and why. The way I (perhaps naively) see the source control world is three general paradigms: Single-repository, locked access (MS SourceSafe) Single-repository, concurrent access (CVS/SVN) Distributed (Mercurial, Git) I haven't heard of anyone using #1 for quite a number of years, so I am planning to disregard this case altogether (unless I get a compelling argument otherwise). However, I'm at a loss as to whether to support #2 or #3, and which specific implementations. I'm concerned that the use paradigms are subtly different enough that I can't adequately capture basic operations in a single UI. The last bit of information I should convey is that this application is intended to be deployed in a commercial setting, where a source control system may already be in use. I would prefer not to support more than one solution unless it's really a deal-breaker, so wide adoption in a corporate setting is a plus.

  Read the article

• Home Sharing and Remote on iTunes causing firewall nags

  - by BoltClock

  It seems that enabling Home Sharing and/or hooking up my iPhone's Remote to iTunes causes Mac OS X Snow Leopard's firewall to freak out and keep nagging every time I launch iTunes to ask if I'd like it to accept incoming connections. If I turn off Home Sharing and forget all Remotes, the nag dialog no longer comes up. I could also disable the firewall, but I think that's a silly thing to do. iTunes is already in the firewall whitelist, so the only thing I know that could cause Mac OS X to nag is a bad application bundle code signature. I checked with this Terminal command: $ codesign -vvv /Applications/iTunes.app/ And sure enough, this is what it outputs: /Applications/iTunes.app/: a sealed resource is missing or invalid /Applications/iTunes.app/Contents/Resources/English.lproj/AutofillSettings.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/iTunesDJSettings.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/MobilePhonePrefs.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/MobilePhoneSetup.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/UniversalAccess.nib/objects.xib: resource added I've tried reinstalling iTunes as suggested by this answer, but Mac OS X still nags about incoming connections and the exact same output is generated when I run the above command again. On my PC, Windows Firewall has never nagged whenever I turn on Home Sharing and hook up Remote on my iPhone. Both computers use iTunes 9.2.1. My Mac runs Mac OS X 10.6.4. Is there anything special I need to do that I might have missed? Or how do I resolve the issue? EDIT: I've updated to iTunes 10, but the nags on my Mac are still there and only go away if I turn off Home Sharing and Remote. EDIT 2: I've updated to Remote 2.0 on my iPhone, but the firewall nags are persisting. Has anyone else had this firewall issue at all?

  Read the article

• TFS How does merging work?

  - by Johannes Rudolph

  I have a release branch (RB, starting at C5) and a changeset on trunk (C10) that I now want to merge onto RB. The file has changes at C3 (common to both), one in CS 7 on RB, and one in C9 (trunk) and one in C10). So the history for my changed file looks like this: RB: C5 -> C7 Trunk: C3 -> C9 -> C10 When I merge C10 from trunk to RB, I'd expect to see a merge window showing me C10 | C3 | C7 since C3 is the common ancestor revision and C10 and C7 are the tips of my two branches respectively. However, my merge tool shows me C10 | C9 | C7. My merge tool is configured to show %1(OriginalFile)|%3(BaseFile)|%2(Modified File), so this tells me TFS chose C9 as the base revision. This is totally unexpected and completely contrary to the way I'm used to merges working in Mercurial or Git. Did I get something wrong or is TFS trying to drive me nuts with merging? Is this the default TFS Merge behavior? If so, can you provide insight into why they chose to implement it this way? I'm using TFS 2008 with VS2010 as a Client.

  Read the article

• Moving from SVN to HG : branching and backup

  - by rorycl

  My company runs svn right now and we are very familiar with it. However, because we do a lot of concurrent development, merging can become very complicated.. We've been playing with hg and we really like the ability to make fast and effective clones on a per-feature basis. We've got two main issues we'd like to resolve before we move to hg: Branches for erstwhile svn users I'm familiar with the "4 ways to branch in Mercurial" as set out in Steve Losh's article. We think we should "materialise" the branches because I think the dev team will find this the most straightforward way of migrating from svn. Consequently I guess we should follow the "branching with clones" model which means that separate clones for branches are made on the server. While this means that every clone/branch needs to be made on the server and published separately, this isn't too much of an issue for us as we are used to checking out svn branches which come down as separate copies. I'm worried, however, that merging changes and following history may become difficult between branches in this model. Backup If programmers in our team make local clones of a branch, how do they backup the local clone? We're used to seeing svn commit messages like this on a feature branch "Interim commit: db function not yet working". I can't see a way of doing this easily in hg. Advice gratefully received. Rory

  Read the article

• how to set up dual wireless routers (G and N) with single broadband connection

  - by user15973

  A local cafe has an 802.11g wireless router attached to either an 8- or 12Mbs broadband connection. Although many customers still have -g devices, an increasing number are showing up with 802.11n devices (e.g. Mac laptops, iPads). The cafe owner is content with his router's area coverage, but he would like for his customers to be able to take advantage of the higher -n download speeds. He could simply replace the -g router with a -n router, but reportedly -n routers slow down considerably when servicing both -g and -n connections. Another option would be to buy the -n router, run an Ethernet cable between the two routers, and (of course) hook up the broadband connection to one of the two routers. Still another option would be to attach an ordinary, wired switch to the broadband connection and then attach both routers to the switch. Aside from the cost issue, what are the tradeoffs of those approaches? Which would you recommend, and why? Is there a better option than the ones I mentioned? Thank you in advance for your advice.

  Read the article

• What are the IR codes the new Apple Remote (alu) uses?

  - by index

  I would like to clone the new Apple Remote (infrared, second generation, aluminium) just for fun with a microcontroller. Most codes of the previous model can be found in the LIRC remote control database (all except the key combinations menu + <<,play, which unpair, change ID, pair the remote. I also don't know which bit encodes the battery status. It uses a modified 32 bit NEC protocol (reverse LIRC codes bytewise). But the new Apple remote uses two additional codes for the play and the new select button. I don't have a mac, so I can't brute force test codes either ;-) So if someone possesses such a remote and the ability of recording those two new buttons and three combinations I'd really appreciate it. If you can't run LIRC (or it gets confused by the new codes) and you don't have an oscilloscope or logic analyser, maybe you could hook up a photo diode to your sound input and record the codes with Audacity? Just hit record, hit each button and combo a few times, hit stop, upload the uncompressed WAV file to a sharing site, done. That'd be great!

  Read the article

• Two VGA monitors on Lenovo IdeaCentre H520 Desktop

  - by Sebastian-Laurentiu Plesciuc

  I recently bought a Lenovo IdeaCentre H520 computer and two VGA LED monitors. This particular PC has a dedicated NVIDIA Geforce GT630 video card and an integrated Intel HD Graphics 2500 video card. Both cards have VGA out. The Geforce card also has a HDMI out. I have installed Windows 8 and I can't seem to use both cards. I have connected both monitors, one to the VGA out of the Geforce card and one to the VGA out of the integrated card. I looked through the BIOS options for Video and I can only select the dedicated one, the integrate one or the Auto option. This kinda sucks. I was wondering what kind of options I have available. I have a VGA female to DVI A male adaptor, I was wondering if it could work if I can hook it to a DVI A female to HDMI male adaptor and plug one monitor into the VGA out of the Geforce video card and the other through both adapters to the HDMI out. Any chance this could work? I was looking online for a VGA to HDMI live cable but it's kind of expensive.

  Read the article

• setting the PATH for Git (not for me)

  - by Iain

  Hi, I'm running OSX 10.6.5 with Git 1.7.1 I have git installed in a non-standard location (though that really should be the standard on a mac;-) in /Library/Frameworks/Git.framework. My own PATH is set fine, git works fine, until... I set up a pre-commit hook with a Ruby script: $ git commit -m "added some Yard documentation" .git/hooks/pre-commit: line 1: #!/usr/bin/env: No such file or directory The pre-commit.sample runs ok, so it appears that git can't find /usr/bin/env, or much else as I've tried shebanging it directly to ruby etc. Just /bin/sh is ok. So, where does Git get it's PATH? because it's not using mine or this wouldn't be happening. And more to the point, how do I get it to see /usr/bin/env ? I've tested the ruby script already, it works. Just to add: $ cat /etc/paths /usr/bin /bin /usr/sbin /sbin /usr/local/bin $ cat /etc/paths.d/git /Library/Frameworks/Git.framework/Programs The first few lines of the Ruby script (which runs via ./pre-commit or ruby pre-commit) #!/usr/bin/env ruby -wKU class String def expand_path File.expand_path self end def parent_dir File.dirname self.expand_path end end

  Read the article

• Troubles Installing Windows 7 via USB. Flat install?

  - by Brian

  Hi friends, I've been struggling with this for a while. Windows 7 64-bit Enterprise edition just will not install on my Shuttle K45 system via a USB key. It hangs out during the install while copying files or while creating the partitions. The system is pretty standard and low-tech: IDE hard drives, no CD, 2G RAM. I am not sure what of the problem. Other than the Shuttle, I have a Apple MacBook Pro. On the MPB, I am running OS X, and Mint Linux and Window XP over Parallels. I have an ISO of Win7 that works (I installed it as a Parallels VM to make sure). I have used UltraISO and MS Windows 7 USB/DVD Download Tool to write it to the 8G USB key. Both seem to copy all the files correctly (with UltraISO, I asked it to verify). It boots via USB and the install looks just fine. Until it hangs, most of the time with a copying error of 0x80070241. So now I am trying to figure out if there are other ways I can install Windows 7 on this Shuttle system that has no CD drive. I've heard about a flat installation, however those all seem to be doing something from within Windows. I do have access to a command prompt from the Windows 7 install. Does anyone know if/how I can prep the Shuttle hard drive with Windows 7 installation and have Windows 7 install from the hard disk. I do not have an external enclosure for the IDE HD and I do not have any other system I can hook up to the hard drives. I do have an external Maxtor OneTouch drive available.

  Read the article

• How to disable monitor "sleep" on Ubuntu without access to X?

  - by exhuma

  I just received a CuBox (basically a tiny ARM based PC). It comes pre-installed with Ubuntu, and I did not (yet) want to fiddle with the OS itself. My aim is to have it automaticall start a browser in fullscrren upon boot. Using chromium with the "--kiosk" flag works perfectly in that regard. But now I have the problem that the screen turns off after a certain time. I managed to turn off the screen saver using: gconftool-2 -s /apps/gnome-screensaver/idle_activation_enabled --type=bool false And tried to turn off the power management using: gconftool-2 -s /apps/gnome-power-manager/ac_sleep_display --type=int 0 and gconftool-2 -s /apps/gnome-power-manager/timeout/sleep_display_ac --type=int 0 Neither of the power-management commands worked. Theoretically I could hook up a mouse and keyboard and configure it manually. But I want to learn how to do it over the console. The box will eventually be only reachable via SSH. So I'd like to be able to trouble-shoot it later. I don't quite know where to look for. I searched the gconf tree using gconftool-2 -S for anything related to the terms power, idle and sleep but did not find anything promising. Maybe it's not even gconf related... Any ideas what else I could look for?

  Read the article

• How can I totally flatten a PDF in Mac OS on the command line?

  - by Matthew Leingang

  I use Mac OS X Snow Leopard. I have a PDF with form fields, annotations, and stamps on it. I would like to freeze (or "flatten") that PDF so that the form fields can't be changed and the annotations/stamps are no longer editable. Since I actually have many of these PDFs, I want to do this automatically on the command line. Some things I've tried/considered, with their degree of success: Open in Preview and Print to File. This creates a totally flat PDF without changing the file size. The only way to automate seems to be to write a kludgy UI-based AppleScript, though, which I've been trying to avoid. Open in Acrobat Pro and use a JavaScript function to flatten. Again, not sure how to automate this on the command line. Use pdftk with the flatten option. But this only flattens form fields, not stamps and other annotations. Use cupsfilter which can create PDF from many file formats. Like pdftk this flattened only the form fields. Use cups-pdf to hook into the Mac's printserver and save a PDF file instead of print. I used the macports version. The resulting file is flat but huge. I tried this on an 8MB file; the flattened PDF was 358MB! Perhaps this can be combined with a ghostscript call as in Ubuntu Tip:Howto reduce PDF file size from command line. Any other suggestions would be appreciated.

  Read the article

• How to deploy to multiple redundant production servers with "cap deploy"?

  - by Chad Johnson

  Capistrano is working great to deploy to a single server. However, I have multiple production API servers for my web application. When I deploy, my code needs to get deployed to every API server at once. Specifying each server manually is NOT the solution I am looking for (e.g. I don't want to do "cap api1 deploy; cap api2 deploy"). Is there a way, using Capistrano, to deploy to all servers at once, with just a simple "cap deploy"? I'm wondering what changes I would need to make to a typical deploy.rb file, whether I'd need to create a separate file for each server, and whether and how the Capfile would need to be changed. Also, I need to be able to specify a different deploy_to path for each server. And ideally, I wouldn't have to repeat things in different config files for different servers (eg. wouldn't have to specify :repository, :application, etc. multiple times). I have spent hours searching Google on this and looking through tutorials, but I have found nothing helpful. Here is a snippet from my current deploy.rb file: set :application, "testapplication" set :repository, "ssh://domain.com//srv/hg/#{application}" set :scm, :mercurial set :deploy_to, "/srv/www/#{application}" role :web, "domain.com" role :app, "domain.com" role :db, "domain.com", :primary => true, :norelease => true Should I just use the multistage extension and do this? task :deploy_everything do system "cap api1 deploy" system "cap api2 deploy" system "cap api2 deploy" end That could work, but I feel like this isn't what this extension is meant for...

  Read the article

• which file stored os.environ,and store where , disk c: or disk d:

  - by zjm1126

  my code is : os.environ['ss']='ssss' print os.environ and it show : {'TMP': 'C:\\DOCUME~1\\ADMINI~1\\LOCALS~1\\Temp', 'COMPUTERNAME': 'PC-200908062210', 'USERDOMAIN': 'PC-200908062210', 'COMMONPROGRAMFILES': 'C:\\Program Files\\Common Files', 'PROCESSOR_IDENTIFIER': 'x86 Family 6 Model 15 Stepping 2, GenuineIntel', 'PROGRAMFILES': 'C:\\Program Files', 'PROCESSOR_REVISION': '0f02', 'SYSTEMROOT': 'C:\\WINDOWS', 'PATH': 'C:\\WINDOWS\\system32;C:\\WINDOWS;C:\\WINDOWS\\System32\\Wbem;C:\\Program Files\\Hewlett-Packard\\IAM\\bin;C:\\Program Files\\Common Files\\Thunder Network\\KanKan\\Codecs;D:\\Program Files\\TortoiseSVN\\bin;d:\\Program Files\\Mercurial\\;D:\\Program Files\\Graphviz2.26.3\\bin;D:\\TDDOWNLOAD\\ok\\gettext\\bin;D:\\Python25;C:\\Program Files\\StormII\\Codec;C:\\Program Files\\StormII;D:\\zjm_code\\;D:\\Python25\\Scripts;D:\\MinGW\\bin;d:\\Program Files\\Google\\google_appengine\\', 'TEMP': 'C:\\DOCUME~1\\ADMINI~1\\LOCALS~1\\Temp', 'BID': '56727834-D5C3-4EBF-BFAA-FA0933E4E721', 'PROCESSOR_ARCHITECTURE': 'x86', 'ALLUSERSPROFILE': 'C:\\Documents and Settings\\All Users', 'SESSIONNAME': 'Console', 'HOMEPATH': '\\Documents and Settings\\Administrator', 'USERNAME': 'Administrator', 'LOGONSERVER': '\\\\PC-200908062210', 'COMSPEC': 'C:\\WINDOWS\\system32\\cmd.exe', 'PATHEXT': '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH', 'CLIENTNAME': 'Console', 'FP_NO_HOST_CHECK': 'NO', 'WINDIR': 'C:\\WINDOWS', 'APPDATA': 'C:\\Documents and Settings\\Administrator\\Application Data', 'HOMEDRIVE': 'C:', 'SS': 'ssss', 'SYSTEMDRIVE': 'C:', 'NUMBER_OF_PROCESSORS': '2', 'PROCESSOR_LEVEL': '6', 'OS': 'Windows_NT', 'USERPROFILE': 'C:\\Documents and Settings\\Administrator'} i find google-app-engine set user_id in os.version not in session,look here at line 96-100 and line 257 , and aeoid at line 177 , and i want to know : which file stored os.environ ,and store where , disk c: ,or disk d: ? thanks

  Read the article

• Running WAMP (XAMPP) and LAMP from One SSD, On 64-bit Windows and Linux Machines

  - by nicorellius

  I have an solid state drive that I develop websites on. The reason I do this is because I work on a few different computers. Historically, I created separate developing environments to use for each machine. This was OK, but if the system changed for some reason, eg, new OS install, it was a pain. So I bought a USB 3.0 enclosure and put a solid state drive in there and it's pretty darn fast, which is good. I was working with three Windows machines and I could simply hook up the drive, launch my XAMPP server and away I went, developing websites: using Dreamweaver, Komodo, Notepad++, Eclipse, etc. Recently, however, one of my Windows machines' hard drive went down and instead of going back to Windows in this case, I went with Ububntu 12.04. I have several Ubuntu workstations and servers and I like Linux, so I thought his was a great opportunity to transition. I went to work installing and trying to set up a LAMP server and, besides from XAMPP 64-bit compatibility out of the box, I'm seeing other issues with getting this Linux server running. I will keep trying to resolve this, but in the meantime... my question is, has anyone ever successfully run both WAMP and LAMP from the same SSD (formatted to NTFS)? I'm sure there are lots of barriers to this happening, like local file system, OS libraries, dependencies, etc. But I was thinking it would be cool if it could be done. I'm no expert, so if this is just plain old stupid, please don't hesitate to let me know.

  Read the article

• Log connections to program

  - by Zac

  Besides for using iptables to log incoming connections.. Is there a way to log established inbound connections to a service that you don't have the source to (suppose the service doesn't log stuff like this on its own)? What I'm wanting to do is gather some information based on who's connecting to be able to tell things like what times of the day the service is being used the most, where in the world the main user base is, etc. I am aware I can use netstat and just hook it up to a cron script, but that might not be accurate, since the script could only run as frequently as a minute. Here is what I am thinking right now: Write a program that constantly polls netstat, looking for established connections that didn't appear in the previous poll. This idea seems like such a waste of cpu time though, since there may not be a new connection.. Write a wrapper program that accepts inbound connections on whatever port the service runs on, but then I wouldn't know how to pass that connection along to the real service. Edit: Just occurred to me that this question might be better for stackoverflow, though I am not certain. Sorry if this is the wrong place.

  Read the article

• Windows Server 2008 is stuck at "configuring updates - stage 3 of 3 - 0% complete"

  - by Chris

  This has happened the last two times I've done updates to this system, and I really have no idea what is going on. It is installing a only a month's worth of updates. It only responds to ping and no services are up, so I can't view the system remotely (I have to hook up a monitor to see this message). In the past I've just restarted the system at this point and it eventually finishes updating. I want to know what I can do to avoid this situation, how to diagnose what is going on, and how to get any kind of remote access during the updates. Edit: I can start the machine in safe mode (where I did nothing but backup some files). I restarted and it no longer tries to do a windows update, just goes to the desktop where everything seems extremely broken. I can click on some things, but not launch most programs. I guess all I can do at this point is do a system restore or something. Edit: Re-installed windows on this system yesterday. That's my usual solution to issues I don't feel like diagnosing, like this one.

  Read the article

• Automatically update SVN repository on another server

  - by Mikey C

  We have 2 Ubuntu web servers, one of which is our staging server (Staging) and the other is our live server (Live). Staging has our Subversion repository, as well as the latest version of our sites on it. Because the SVN server is running on Staging, I've added post-commit hook scripts so that the staging server automatically has the latest code. Easy. However, I'd like one of the repositories on Live to also stay updated. This is a repository of images, PDFs and suchlike. When a team member commits to this, I'd like it to automatically update on the live servers so it can be used in mailings, content managed pages etc. I'd add something to the post-commit to SSH across and update, but for security, we can only SSH from one server to another as user 'commandLine', whereas the 'www-data' user runs the post-commit. I'd rather not run a cron on Live to update every 5 minutes, but I can't see another way of doing it without altering all our user permissions. Any ideas?

  Read the article

• Is there a way to specify a per-host deploy_to path with Capistrano?

  - by Chad Johnson

  I have searched and searched and asked a question already and have not received a clear answer. I have the following deploy script (snippet): set :application, "testapplication" set :repository, "ssh://domain.com//srv/hg/#{application}" set :scm, :mercurial set :deploy_to, "/srv/www/#{application}" role :web, "domain1.com", "domain2.com" role :app, "domain1.com", "domain2.com" role :db, "domain1.com", :primary => true, :norelease => true role :db, "domain2.com", :norelease => true As you see, I have set deploy_to to a specific path. And, I also have specified multiple web servers. However, each web server should have a different deployment path. I want to be able to run "cap deploy" and deploy to all hosts in one shot. I am NOT trying to deploy to staging and then to production. This is all production. My question is: how exactly do I specify a path per server? I have read the "Roles" documentation for Capistrano, and this is unclear. Can someone please post a deploy file example? I have read the documentation, and it is unclear how to do this. Does anyone know? Am I crazy? Am I thinking of this wrong or something? No answers anywhere online. Nowhere. Nothing. Please, someone help.

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >