Search Results

Search found 2210 results on 89 pages for 'sum'.

Page 69/89 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

  • How does a web server/the http protocol handle version control and compression?

    - by Sune Rasmussen
    When a client browser requests a file from the web server, I know that some kind of check is performed, because the files needed to serve the web page may already be cached by the web browser. So, if a file exists in the cache, no files are sent. But if the file on the server has changed since the file was cached in the browser, the file is sent and updated anyhow. Then, if you have compression like gzipping enabled on the server, the files that are to be provided to the client must be gzipped on the way, requiring some amount of server side processing. But how is this managed? The logical approach seems to me, that the web server should have a cache as well, containing the newest version of all files that have been requested within a certain time span, thus a compressed version of these files, so that compression would not have to be done each time a files is requested. And also, how are files eventually requested? Does the browser ask for files, each time it encounters one in the HTML code and the specific file is not stored in the local cache, or does it sum all the files that are needed up and ask for the whole bunch at the same time? But that's only guessing from a programming point of view, and I don't really know. If the answers are very different among web server systems, I'm primarily interested in Apache, but other answers are appreciated, too.

    Read the article

  • Linux Distro for Beginners

    - by XLR3204S
    Well... I know that's the question arising all over the Internet, but I couldn't find an answer to suit me after googling for quite some time. I'd like to get a Linux distribution, and start learning using the CLI. I'm looking for a distribution already having GNOME installed, as I'll be using Linux-Command.org as my learning resource, and I'm not very familiar with CLI-based web browsers. I'd mainly like to get to know my way around a UNIX-based system, and then I think I'd like to pick up a CLI-only distribution, and start doing more complex stuff. I've tried Ubuntu, Fedora Core, OpenSolaris and FreeBSD (the last two aren't linux distros, I know). Ubuntu and FC are fine, they do come with Firefox, but I'm not really sure they're meant for learning purposes. OpenSolaris was OK as well, but I haven't got to play with it enough. FreeBSD 7.2 did not want to install itself on my 13" MacBook Pro, it generated a kernel panic everytime while copying the files to the disk. So to sum this up, I'm trying to learn Linux, and I'm willing to invest time into this (that is, not giving up when the first problems arise). I also have intermediate knowledge of C++, if it helps, and I'm also using the CLI-vim to write small C++ CLI-based programs, so text editing should be any problem. And... speaking of Macs, how am I going to be limited if I try to learn how to use UNIX-based systems using the OS X Terminal? It uses bash 3.2, isn't this the same shell as the one found on most of the Linux machines? How does the fact that OS X is based on FreeBSD 4.4, if I'm not mistaking, affect this? Thanks in advance, and hopefully, I'll have a starting point ASAP.

    Read the article

  • Advice needed: ADSL and VPN for a small company

    - by Saajid Ismail
    Hi. I need advice on purchasing an ADSL modem/router for a small company. At the moment, we are using the iBurst Wireless service for internet connectivity. I have the iBurst desktop modem, which connects to my Netgear WNR2000 router via ethernet. I am using the Netgear WNR2000 to deploy a wireless network as well. I have also set up a VPN using Windows Server 2003, and enabled the VPN Passthrough settings on the Netgear router. I am able to connect to the office network remotely without difficulty. However the problem that I've read is that the Netgear WNR2000 only supports VPN passthrough for a single session. This is simply not good enough. I need to be able to support at least 3 concurrent VPN connections immediately, and up to 5 in the near future. Now I am cancelling my iBurst Wireless service and have just got my ADSL line installed. I have to purchase an ADSL modem, and now is a good time to think of future proofing my investment. I need a good ADSL modem, that will allow me to support at least 5 concurrent VPN connections, or more, without breaking the bank. My budget is about 150-200 USD. I believe that my current Netgear WNR2000 router will be useless, except maybe to extend my wireless network in the future by a bit. Is there a solution where I can still use my Netgear WNR2000 for WiFi, for e.g., by connecting a cheaper non-WiFi ADSL modem to the Netgear router? If not, then which WiFi-enabled ADSL modem/router that supports at least 5 VPN passthroughs can you recommend? To sum it up, I need an ADSL modem/router that is: ADSL & ADSL2+ compatible has built-in 802.11n 270/300mbps WiFi (if having this feature doesn't push the price up too much) supports at least 5 VPN connections using VPN passthrough EDIT: Answer 2.10 in the following FAQ has me a bit worried - What is VPN/multiple VPN Pass-through?

    Read the article

  • Windows 7: Touch gestures in IE not working without explorer.exe being run once

    - by Michael
    Details: Internet Explorer 9 and Windows 7 Professional, running on a HP TouchSmart (touch screen PC). It is going to be a kiosk PC (running a custom GUI for displaying websites). Scenario 1: When running Internet Explorer as a normal program in Windows 7, touch functions work perfectly. I can scroll the website by dragging it with my finger, I can pinch zoom and I can touch-and-hold right click. I now change the default shell in Windows to Internet Explorer (ie. IE starts instead of explorer.exe). Internet Explorer of course starts up when logging in. However, touch functions are reduced to basic clicking (no dragging, no pinch zooming, no touch-and-hold right click). Then I manually start explorer.exe, and the touch functions work again! And here is the weird part: When I kill explorer.exe, the touch functions keeps working - even if I close IE and start a new instance. Scenario 2: The exact same, but instead of changing the default shell to Internet Explorer, I change it to my own program, which uses an embedded Internet Explorer ("WebBrowser"). Same thing happens. What I've tried: Autorun programs: When explorer.exe launches, it launches all the autorun programs. There are no relevant programs being run by explorer, but just in case, I have manually started all the autorun programs, so that it is identical (but without explorer.exe) to a normal login. It still does not work (until I launch explorer.exe). Specifically TabTip.exe, TabTip32.exe and wisptis.exe are all running. All services are also started. To sum it up Running explorer.exe once changes something in the touch capabilities of Internet Explorer. It doesn't matter if explorer.exe is running - as long as it has been run once. Does anyone know what causes this behavior? Or how I can circumvent it neatly? Thanks!

    Read the article

  • Inexpensive, simple screen recording application for mac

    - by donut
    I am more and more consistently running into the need to create screencasts (record my screen) for clients to show them how to use programs or websites. Up until now I've been using Jing and it's been wonderful. But I would like something that can give me something less annoying than a .swf. A .mov or, best of all, something that plays without fuss on Mac and Windows. Also, the 5-minute limit is annoying, but not show stopping. Basically, I'd like to be able to actually give them the file on a CD or something instead of relying on whatever host I use staying up for eternity. To sum up, here's what I require: Record a portion or all of the screen. Records audio from mic while recording screen. Exports files easily playable on Mac and Windows (requiring Quicktime is okay, but not ideal) Will work on Mac OS 10.5+ Allows recording videos of at least 5 minutes. Text in recorded videos is easily readable when exported. Bonuses points for: Records videos greater than 5 minutes Exported videos will work in Windows Media player without any fuss. I haven't upgraded to Snow Leopard yet but I know it has some screen recording stuff built in but I don't know if it would be sufficient or not. The reason I say, "simple" is because most of the applications I've seen do much more than I need (I mean, Jing is nearly perfect for my needs) and cost more than I would like to spend.

    Read the article

  • mod_wsgi, .htaccess and rewriterule

    - by hadaraz
    I'm using several django projects running on the same apache instance through mod_wsgi, configured with virtualhost for each site, see the httpd.conf here. For one of the sites I want to use static-cache (staticgenerator), so I set up a directory with .htaccess file which contains: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}/index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] where 3456 is the django port on the server. Using this rewrite rule, the request is always forwarded to the mod_wsgi handler, even if the file or directory exists, and if the file index.html exists the request shows as request-path/index.html. I tried another setup: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond $1 !-d RewriteCond $1index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] but got almost the same results. All requests are transferred to the mod_wsgi handler, but the request path is now the original one. To sum it up: What is the correct RewriteCond to use here? How do you transfer a request to the mod_wsgi handler? Is it the right way? If that's not the way to do it, then how do you serve static files from a directory when they exist, and when they don't you serve from apache/mode_wsgi? Thanks for your help.

    Read the article

  • What's hogging my CPU?

    - by endolith
    Ubuntu's System Monitor applet shows 100% CPU usage continuously. If I click it, the resources tab shows it at 100% continuously, too. If I go to processes, though, to find out which process is the culprit, there is nothing above 10%. If I run top there is nothing above 10%. I try killing lots of things, but it continues at 100%. How can I find out what's hogging the CPU? This is an unusual situation on a computer I use daily, that normally only hits 100% CPU when I'm doing something that requires it (like loading 32 Firefox tabs) after which it goes back to a normal idle level. It's not a new install or anything. It shouldn't be maxed out. I'm not sure when it started or if I changed something that caused it to happen. Normally I would use top or System Monitor and find the process that had gone out of control, but I can't find anything with those tools this time. It persists after reboots and everything. And the processor is obviously hot, so it's not an erroneous reading. Update: I tried killing any process I saw active again, and killing vino-server finally fixed the problem, even though it never went above 5%. I had enabled Remote Desktop a few days ago (and have obviously now disabled it). How did it manage to use 100% CPU while top only showed it as 5% or so? How do I identify the culprit in the future? Looks like I'm not the only one: Still a problem in both jaunty & karmic. Interestingly, both System Monitor & htop do not show the sum of individual processes being anywhere near 100% cpu.

    Read the article

  • Replacing latex with unicode symbols

    - by Elazar Leibovich
    Often, during a conversation or an email, or at a forum, I would like to type some math, but I don't need full equation support. Unicode symbols should suffice. What I need is an easy way to type math related unicode symbols. Since I already know latex, it makes sense to use the latex symbol mnemonics to type the math symbols. What I currently did is to write an AutoHotKey script which automatically replaces \latexSymbol with the corresponding unicode symbol, using the "hotstrings" AutoHotKey feautres. However, the AutoHotKey hotstrings proved unstable for many strings. Having a couple of tens lines would cause AHK to fail recognizing the strings from time to time. Any other solution? (No, Alt+unicode number isn't convenient enough) Attached is my AHK script. The PutUni function is taken from here. ::\infty:: PutUni("e2889e") return ::\sum:: PutUni("e28891") return ::\int:: PutUni("e288ab") return ::\pm:: PutUni("c2b1") return ::\alpha:: PutUni("c991") return ::\beta:: PutUni("c992") return ::\phi:: PutUni("c9b8") return ::\delta:: PutUni("ceb4") return ::\pi:: PutUni("cf80") return ::\omega:: PutUni("cf89") return ::\in:: PutUni("e28888") return ::\notin:: PutUni("e28889") return ::\iff:: PutUni("e28794") return ::\leq:: PutUni("e289a4") return ::\geq:: PutUni("e289a5") return ::\sqrt:: PutUni("e2889a") return ::\neq:: PutUni("e289a0") return ::\subset:: PutUni("e28a82") return ::\nsubset:: PutUni("e28a84") return ::\nsubseteq:: PutUni("e28a88") return ::\subseteq:: PutUni("e28a86") return ::\prod:: PutUni("e2888f") return ::\N:: PutUni("e28495") return

    Read the article

  • Apache 2.4 Prefork vs. PHP-FPM Event shows sig decrease in requests per second

    - by Mark
    On my Apache 2.4.2 server with a standard mod_php Prefork setup these are my server-status results Current Time: Wednesday, 24-Oct-2012 19:36:24 CDT Restart Time: Wednesday, 24-Oct-2012 01:27:30 CDT Parent Server Config. Generation: 1 Parent Server MPM Generation: 0 Server uptime: 18 hours 8 minutes 54 seconds Total accesses: 14304233 - Total Traffic: 342.3 GB CPU Usage: u12584.6 s721.93 cu.66 cs3.43 - 20.4% CPU load 219 requests/sec - 5.4 MB/second - 25.1 kB/request 507 requests currently being processed, 355 idle workers ______KKKKR_K______W_KKC___CKK_K_K_W__CC_KKK_KK._K_K_KK._KKKK_K_ K_____KK_KKKK_K_KK__K___KK_K___K_____CKKK_WK_K_____KCKK__K___K_K K_CK_K_K_____K__KKKK_K__K___K_KK_K_K_KKKCK____________KK_CK__KKK __C_KKKKKKK___CK___C_KKK_K__C__K_CK____KKK__K__K__K_K__KK_CK_K__ _KKKKK_K_W__KK______K___K__W___C_K__K____KKKKKKKK.KKKKKKKCK_K___ _C_KK_K_WK__K_KK__K__RK_KK___K____K_KK_K_K___RKC_KKKK___KKKC_K_W _C_KK_KK__W____KC__KKK__KKK___K___KKK_KK_K_KKW__K_KR_KK_KK__KKK_ R__KKK__KKKKKK__K_KKKKK_K__K_K___KKW_________KK_K___KKK___KK.K_C KKKKKKW_____K__K_KKC_KCKK_K_KK_K__KK__K___K__KK_KK__________KK__ __K___KK_K__K_C_KK_K___KK__KK__K__KCK_K__KK_________K_K_KK__.K__ K_CKK.CCRW__KKKKKKKKKKKC__W____K___KWK_KK_KKC______.K_K_KK_KKKC_ __KKK_W_KCKKK_K_K____CCCK__KC_KKKK_K____K_CK_K____K__K____KKK_KK KK___K_K_K__KW__KCKKKK____WKWK__K_KKRKK__C_K_KK_KK_K__KKCC_K__C_ KK_K___K_KK______K_____CKK_K_______KK_CKCK__KKKKK____K__K..K____ __KKWK_KW__KKK__K_KKK___K_KK_KKK__KK___KK___KK_KK___KK____KKWKKC KK_KKKK_................................` When I switch to a PHP-FPM setup with the Event MPM with no other variables changes, my requests/sec plummet and overall apache response is garbage. Current Time: Wednesday, 24-Oct-2012 19:51:21 CDT Restart Time: Wednesday, 24-Oct-2012 19:48:03 CDT Parent Server Config. Generation: 1 Parent Server MPM Generation: 0 Server uptime: 3 minutes 18 seconds Total accesses: 18720 - Total Traffic: 307.1 MB CPU Usage: u16.57 s4.74 cu0 cs0 - 10.8% CPU load 94.5 requests/sec - 1.6 MB/second - 16.8 kB/request 15 requests currently being processed, 49 idle workers PID Connections Threads Async connections total accepting busy idle writing keep-alive closing 11701 114 no 10 22 0 66 38 11702 134 no 5 27 0 81 48 Sum 248 15 49 0 147 86 __R_R__W___RRW________RR__R___W_W_______W_____W_____________R_R_ Is there any obvious reason anyone could think of why this would be the case. I can provide any other additional stats or server setup info to help out. Ive tried tweaking everything up and down and nothing really helps get the PHP-FPM setup anywhere near a baseic prefork/mod-php setup. Thanks!

    Read the article

  • postgresql No space left on device

    - by pstanton
    Postgres is reporting that it is out of disk space while performing a rather large aggregation query: Caused by: org.postgresql.util.PSQLException: ERROR: could not write block 31840050 of temporary file: No space left on device at org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:1592) at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1327) at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:192) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:451) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFlags(AbstractJdbc2Statement.java:350) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:304) at org.hibernate.engine.query.NativeSQLQueryPlan.performExecuteUpdate(NativeSQLQueryPlan.java:189) ... 8 more However the disk has quite a lot of space: Filesystem Size Used Avail Use% Mounted on /dev/sda1 386G 123G 243G 34% / udev 5.9G 172K 5.9G 1% /dev none 5.9G 0 5.9G 0% /dev/shm none 5.9G 628K 5.9G 1% /var/run none 5.9G 0 5.9G 0% /var/lock none 5.9G 0 5.9G 0% /lib/init/rw The query is doing the following: INSERT INTO summary_table SELECT t.a, t.b, SUM(t.c) AS c, COUNT(t.*) AS count, t.d, t.e, DATE_TRUNC('month', t.start) AS month, tt.type AS type, FALSE, tt.duration FROM detail_table_1 t, detail_table_2 tt WHERE t.trid=tt.id AND tt.type='a' AND DATE_PART('hour', t.start AT TIME ZONE 'Australia/Sydney' AT TIME ZONE 'America/New_York')>=23 OR DATE_PART('hour', t.start AT TIME ZONE 'Australia/Sydney' AT TIME ZONE 'America/New_York')<13 GROUP BY month, type, t.a, t.b, t.d, t.e, FALSE, tt.duration any tips?

    Read the article

  • find the next due date after today within a group in an Excel PivotTable

    - by Dennis George
    I have got a table set up in one sheet with "transactions". Each row contains a name of a vendor, the amount owed or paid depending on transaction type, and the due date/transaction date. Here is some simplified sample data: Vendor Date Invoice Payment Vendor A 6/30 $200 Vendor A 6/30 ($200) Vendor B 7/5 $500 Vendor B 7/5 ($500) Vendor C 10/28 $50 Vendor A 10/30 $100 Vendor C 11/15 $50 I have already built a PivotTable from that table to group these transactions by vendor and sum the remainder owed. What I'm trying to figure out is how to, for each vendor, get the next due date (min date of the group, excluding dates < Today()), or if there is no next due date then I want to see the max date for that group. Here is what my PivotTable looks like, plus the date column I'd like to add (assuming Today() = 10/23): Vendor Date Owed Vendor B 7/5 - Vendor C 10/28 $100 Vendor A 10/30 $100 I know calling it next due date might not be so accurate if I end up with the date of a payment in that column, but I'm ok with that. tl;dr : I want to find the next earliest date within each group, or the last date. How do I do this?

    Read the article

  • Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

    - by Starchy
    I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

    Read the article

  • "The zone can be scavenged after" keeps incrementing

    - by kce
    What are you trying to do? I'm trying to enable DNS scavenging on a DNS zone that has about a hundred stale DNS records. What have you tried in order to make it happen? I setup DNS Scavenging per everyone's favorite TechNet Blog post: Don't be afraid of DNS Scavenging. Just be patient. I first disabled scavenging on all of our domain controllers: DNSCmd . /ZoneResetScavengeServers contoso.com 192.168.1.1 192.168.1.2 I then enabled automatic scavenging on the DNS zone: I then enabled DNS scavenging on one of the domain controllers: I then found a few records that I expected to get delete with timstamps from a few years ago and ensured that that the Delete this record when it becomes stale and that time stamp was actually set: Finally I reloaded the zone and waited 14 days (the sum of the Refresh + No-Refresh periods). What results did you expect? I expected to see a 2501 Event in the DNS server logs noting the deletion of a bunch of DNS records. What actually happened? Nothing happened. The Zone Aging/Scavenging Properties showed that the zone could be scavenged after 6/12/2014 10:00:00 AM last week. No 2501/2502 events were recorded. All of the records with "aged" time stamps are still present. The date at which the zone can be scavenged after incremented another seven days to ?6/?18/?2014 10:00:00 AM. As I understand it until that date stays at least 14 days in the past nothing will ever even be eligible for scavenging let alone actually be scavenged. The only 2501 events recorded in the event logs are ones that I have triggered by right clicking and selecting "Scavenge Stale Resource Records". They note that scavenging will try to run again in 168 hours which was this morning. I have DNS scavenging enabled for a few months and have waited patiently for something to happen. I have reloaded the zone multiple times (which resets this timestamp). What am I missing here?

    Read the article

  • Will Parallel-port dongle work on USB-to-Parallel Adapter?

    - by Gary M. Mugford
    We have a niche program running on a Win2K laptop that uses a security dongle connected to a parallel port for authentication. The laptop is getting creaky and I spent a frustrating night last night shopping various websites for a new laptop that had a parallel port. Seems I'm about three years late [G]. The question I have, is, if I buy a new(ish) laptop and use a USB-to-Parallel Port adapter, will the security dongle work? I know I'm not being specific about the app, but it's one most people wouldn't have heard of anyways. I've been guessing the answer to my question is no, since the app won't know to send a request out to the non-existent port. But, if the process actually is that the dongle sends a message INTO the computer every now and then, then it might work. And, I'm not sure whether the dongle is only needed at program startup time or randomly. The dongle is a 'permanent' addition to the old laptop. This is all about the money. We can have a newly-updated version of the program (which won't add any features we need) for the princely sum of $2700. Or we can spend $500 on a refurbed laptop still running WinXP, add a 30 buck adapter and keep the same solid, stolid performance we've come to appreciate. But it all comes down to the dongle behaviour. Oh, and a dock won't work. The whole laptop issue is about moving about the various nooks and crannies of the building with laptop in hand. Thanks for any suggestions/guidance. GM

    Read the article

  • Windows 7 - mysteriously missing free HDD space

    - by sYnfo
    I have Windows7 installed on 50GB (Oops, it should have been 45GB, sorry) partition, and every now and then it gets full, and I have to resize that partition. I always thought it is quite normal. But it happened again today and this time, I'm sure it is not normal, because since last resizing (35GB 45GB) I did not install any new apps or whatever. Also, sum of sizes off all, including hidden & system, root folders and files is ~18GB, yet windows is indicating that all 50GB are used up... Any idea what is going on? EDIT: Great tools everyone! (SourceForge appears to be offline at the moment, I'll check WinDirStat later) Alas, non of them solved my problem just yet... Screenshot from SpaceSniffer: On the right there is some kind of "Unknows Space", any idea what that could be? EDIT2: After those two apps failing to help much I didn't expect it, but WinDirStat actually helped. It showed that those missing 27GB are in my Temp folder (Well, that should have been my first guess anyway). There I found hundreds of ~100MB files, named like HTT????.tmp. After some googling it appears to be a problem with ESET NOD32 antivirus and it's ThreatSense feature. Thank you all for help! :)

    Read the article

  • Find out which task is generating a lot of context switches on linux

    - by Gaks
    According to vmstat, my Linux server (2xCore2 Duo 2.5 GHz) is constantly doing around 20k context switches per second. # vmstat 3 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 2 0 7292 249472 82340 2291972 0 0 0 0 0 0 7 13 79 0 0 0 7292 251808 82344 2291968 0 0 0 184 24 20090 1 1 99 0 0 0 7292 251876 82344 2291968 0 0 0 83 17 20157 1 0 99 0 0 0 7292 251876 82344 2291968 0 0 0 73 12 20116 1 0 99 0 ... but uptime shows small load: load average: 0.01, 0.02, 0.01 and top doesn't show any process with high %CPU usage. How do I find out what exactly is generating those context switches? Which process/thread? I tried to analyze pidstat output: # pidstat -w 10 1 12:39:13 PID cswch/s nvcswch/s Command 12:39:23 1 0.20 0.00 init 12:39:23 4 0.20 0.00 ksoftirqd/0 12:39:23 7 1.60 0.00 events/0 12:39:23 8 1.50 0.00 events/1 12:39:23 89 0.50 0.00 kblockd/0 12:39:23 90 0.30 0.00 kblockd/1 12:39:23 995 0.40 0.00 kirqd 12:39:23 997 0.60 0.00 kjournald 12:39:23 1146 0.20 0.00 svscan 12:39:23 2162 5.00 0.00 kjournald 12:39:23 2526 0.20 2.00 postgres 12:39:23 2530 1.00 0.30 postgres 12:39:23 2534 5.00 3.20 postgres 12:39:23 2536 1.40 1.70 postgres 12:39:23 12061 10.59 0.90 postgres 12:39:23 14442 1.50 2.20 postgres 12:39:23 15416 0.20 0.00 monitor 12:39:23 17289 0.10 0.00 syslogd 12:39:23 21776 0.40 0.30 postgres 12:39:23 23638 0.10 0.00 screen 12:39:23 25153 1.00 0.00 sshd 12:39:23 25185 86.61 0.00 daemon1 12:39:23 25190 12.19 35.86 postgres 12:39:23 25295 2.00 0.00 screen 12:39:23 25743 9.99 0.00 daemon2 12:39:23 25747 1.10 3.00 postgres 12:39:23 26968 5.09 0.80 postgres 12:39:23 26969 5.00 0.00 postgres 12:39:23 26970 1.10 0.20 postgres 12:39:23 26971 17.98 1.80 postgres 12:39:23 27607 0.90 0.40 postgres 12:39:23 29338 4.30 0.00 screen 12:39:23 31247 4.10 23.58 postgres 12:39:23 31249 82.92 34.77 postgres 12:39:23 31484 0.20 0.00 pdflush 12:39:23 32097 0.10 0.00 pidstat Looks like some postgresql tasks are doing 10 context swiches per second, but it doesn't all sum up to 20k anyway. Any idea how to dig a little deeper for an answer?

    Read the article

  • Why my 2nd ip from traceroute is not answering the ping anymore?

    - by Pedro77
    My Internet is really laggy today, I did a tracerout and I realize that I'm having no answer from an ip at the beginning of the traceroute. see: Tracing route to 12.129.202.154 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.1 2 * * * Request timed out. 3 8 ms 8 ms 8 ms bd044008.virtua.com.br [189.4.64.8] 4 9 ms 8 ms 8 ms bd044009.virtua.com.br [189.4.64.9] 5 26 ms 26 ms 24 ms embratel-T0-1-5-0-tacc01.cas.embratel.net.br [200.174.243.21] 6 360 ms 15 ms 12 ms ebt-T0-15-0-12-tcore01.ctamc.embratel.net.br [200.244.140.218] 7 330 ms 349 ms 261 ms ebt-Bundle-POS11942-intl04.mianap.embratel.net.br [200.230.220.10] 8 139 ms 141 ms 139 ms sl-st30-mia-.sprintlink.net [144.223.64.221] Connection diagram: PC - Router configured as access point - Router (192.168.0.1) - Cable modem (192.168.100.1). Well, I think it is odd that the 2nd ip is not returning the ping. I looked some old tracerout logs to see what was the 2nd ip. The ip was: 10.19.0.1 So, what this 2nd ip stand for? How can I find why it is not answering the ping? I don't understand it, if does not answer the ping, how can the packets continue (yeah newbie question)? edit: well, because the hope 3 have a ping of 8 ms the hop 2 request time out should really not be a problem. But it is still odd that the 2nd hop stopped to answer ping request. So my doubts are: 1. Were the ip 10.19.0.1 is from? 2. Why it stopped to answer ping requests? 3. How can hop 7 be smaller than 6 and 8 smaller than 7 and 6!?? Shouldn't the pings be higher for each hop? Like: hop 3 time should be the sum of the hops before it plus its own time (hop 3 = 1+2+3) ??

    Read the article

  • Fix MBR from installed Windows Vista

    - by Danilo
    Hi guys, I have a quite strange problem. I had a system with Vista and Ubuntu installed. We always use Vista and Ubuntu was something we really did not need. BUT: to boot, GRUB was used (I guess grub2). Now, while being in Vista I cancelled the Ubuntu partition and with it also GRUB. Now the system does not boot anymore. I tried to reinstall Ubuntu, but I had some problems with the CD. At the moment, when the system boots I get into the GRUB shell. From there, I am able to boot Windows Vista with some commands like this ones: grub> title windows rootnoverify (hd0,msdos3) chainloader +1 boot Now the question is: if I am able to boot in Windows Vista with this trick, is it possible to fix the MBR from inside the installed windows Vista with some command/tool of Vista itself? I shall probably mention that we are not interested in double boot at the moment. We only want Vista to start. I can sum up the question like this: is there a way to fix the MBR from the installed version on Windows Vista, considering that GRUB is at the moment installed? I hope I was clear enough. Thanks for your help.

    Read the article

  • Replacing latex with unicode symbols

    - by Elazar Leibovich
    Often, during a conversation or an email, or at a forum, I would like to type some math, but I don't need full equation support. Unicode symbols should suffice. What I need is an easy way to type math related unicode symbols. Since I already know latex, it makes sense to use the latex symbol mnemonics to type the math symbols. What I currently did is to write an AutoHotKey script which automatically replaces \latexSymbol with the corresponding unicode symbol, using the "hotstrings" AutoHotKey feautres. However, the AutoHotKey hotstrings proved unstable for many strings. Having a couple of tens lines would cause AHK to fail recognizing the strings from time to time. Any other solution? (No, Alt+unicode number isn't convenient enough) Attached is my AHK script. The PutUni function is taken from here. ::\infty:: PutUni("e2889e") return ::\sum:: PutUni("e28891") return ::\int:: PutUni("e288ab") return ::\pm:: PutUni("c2b1") return ::\alpha:: PutUni("c991") return ::\beta:: PutUni("c992") return ::\phi:: PutUni("c9b8") return ::\delta:: PutUni("ceb4") return ::\pi:: PutUni("cf80") return ::\omega:: PutUni("cf89") return ::\in:: PutUni("e28888") return ::\notin:: PutUni("e28889") return ::\iff:: PutUni("e28794") return ::\leq:: PutUni("e289a4") return ::\geq:: PutUni("e289a5") return ::\sqrt:: PutUni("e2889a") return ::\neq:: PutUni("e289a0") return ::\subset:: PutUni("e28a82") return ::\nsubset:: PutUni("e28a84") return ::\nsubseteq:: PutUni("e28a88") return ::\subseteq:: PutUni("e28a86") return ::\prod:: PutUni("e2888f") return ::\N:: PutUni("e28495") return

    Read the article

  • GA 8KNXP Rev1.0: 4 GB installed, only 3.5 GB recognized by BIOS

    - by hurikhan77
    I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4 GB. The specification from the manual says: Maximum memory support: 4 GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my Linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in Linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

    Read the article

  • How to tell which process is hogging my CPU when they don't add up to 100%?

    - by endolith
    Ubuntu's System Monitor applet shows 100% CPU usage continuously. If I click it, the resources tab shows it at 100% continuously, too. If I go to processes, though, to find out which process is the culprit, there is nothing above 10%. If I run top there is nothing above 10%. The individual processes do not add up to 100%. I try killing lots of processes, but the overall usage continues to be 100%. How can I find out what's hogging the CPU? This is an unusual situation on a computer I use daily, which is never anywhere near 100% CPU unless I'm doing something that requires it (like loading 32 Firefox tabs), after which it goes back to a normal idle level. It's not a new install or anything. There is no reason the processor should be maxed out. I'm not sure when it started or if I changed something that caused it to happen. Normally I would use top or System Monitor and find the process that had gone out of control, but I can't find anything with those tools this time. It persists after reboots and everything. And the processor is obviously hot, so it's not an erroneous reading. Update: I tried killing every process, one at a time, until the problem went away, and killing vino-server finally fixed it, even though that process never went above 5%. I had enabled Remote Desktop a few days ago (and have obviously now disabled it). But the question remains: How did a single process manage to use 100% CPU while top only showed that process at 5%? How do I identify culprits like this in the future? Looks like I'm not the only one who's had this problem: Still a problem in both jaunty & karmic. Interestingly, both System Monitor & htop do not show the sum of individual processes being anywhere near 100% cpu.

    Read the article

  • tar Cannot open: No such file or directory

    - by Jakobud
    Fresh install of CentOS 5.4 Downloaded the following: http://prdownloads.sourceforge.net/webadmin/webmin-1.510.tar.gz MD5 sum is correct (cdcc09d71d85d81914a90413eaf21d3f). The file is located here: /tmp/webmin-1.510.tar.gz tmp and webmin-1.510.tar.gz both have chmod 777. I am logged in as root. Command: tar -zxfv webmin-1.510.tar Result: tar: v: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: webmin-1.510.tar: Not found in archive tar: Error exit delayed from previous errors Never run across this before. It's like it thinks that v is a file I want to extract, but its one of the command arguments... If I leave out the v... tar -zxf webmin-1.510.tar.gz The command stalls. It doesn't do anything. Just goes to the next line and no prompt comes up. I have to CTRL-C to get back to the prompt and a ls verifies that it didn't extract anything... My first reaction is that its not a valid tar/gz file or something. But the MD5 matches just fine. So I'm at a loss just a bit...

    Read the article

  • GA 8KNXP Rev1.0: 4GB installed, only 3.5 recognized by BIOS

    - by hurikhan77
    I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4GB. The specs from the manual say: Maximum memory support: 4GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

    Read the article

  • Windows memory logged on vs logged off

    - by Adi
    Let's say I power on my fresh installed Windows 7 x64 machine. After Windows boots up, there are a bunch of services being started in the background that start allocating memory. Then I enter my user/pass and Windows logs me in. Let's supose I don't do anythig else (I don't explicitely start any application) and I don't have any other app installed by me. So it's fresh install of my machine. My question is: how much memory is needed for all the UI & other stuff? Is it a good indicator to look into task manager and check all the processes started under my user name and sum up all the memory consumed by those processes to get the total amount of memory I am consuming just to stay logged on? Basically this is my question: how much memory is needed just to stay logged on? Now, if log off would all the memory be released back to the system so that the background services can benefit of? Also, I assume that there might be a different discussion for each Windows flavors (?)

    Read the article

  • Insufficient channel capacity of 1GBit

    - by Roman S
    There is a Caching Server (Varnish): it receives data from Amazon S3 on request, saves it for some time and gives it to the client. We have encountered the problem of insufficient channel capacity of 1GBit. Peak load within 4 hours completely chokes the channel. Server performance is sufficient for now. Approximately 4.5TB of data are transmitted per day. More than 100TB are accumulated per month. The first thought that comes to mind is simply to add one more 1GBit port and sleep peacefully until 2GBit are not enough (it may happen quite quickly) or one server is not able to handle it. And then we just need to add new Caching Servers. But now we need a Load Balancer, which will send requests on one and the same URL, always on one and the same server (to avoid multiple copies of the same cached objects). Here are the questions: Does a Balancer need a band equal to sum of all bands of Caching Servers? What shall we do in case there are no ports in a Balancer? Should we add more Balancers or solve the problem by means of Round robin DNS? What are the standard approaches to such problems? Can anyone advise hosting-companies, which can solve this problem? We are interested in American and European markets.

    Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >