network management - Page 691

Very slow KVM in Ubuntu 12.04

- by Guy Fawkes

I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml  <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

Read the article

The Raspberry Pi JavaFX In-Car System (Part 3)

- by speakjava

Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply. All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A). My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area. This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327. Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did. I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication. Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID. The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327". To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file. After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static address 10.0.0.13 gateway 10.0.0.254 netmask 255.255.255.0 iface wlan0 inet static address 192.168.0.1 netmask 255.255.255.0 wireless-essid Wifi327 wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct. However, ifconfig showed no assigned IP address. If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327. I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted. Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d. All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi. Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

Read the article

Virtualized data centre–Part three: Architecture

- by marc dekeyser

Having the basics (like discussed in the previous articles) is all good and well, but how do we get started on this?! It can be quite daunting after all! From my own point of view I can absolutely confirm your worries and concerns, but also tell you that it is not as hard as it seems! Deciding on what kind of motherboard to buy, processor and how much memory is an activity you will spend quite some time doing research on. And that is not even mentioning storage! All in all it comes down to setting you expectations and your budget. Probably adjusting your expectations according to your budget :). Processors As a rule of thumb you want VT-D (virtualization) technology built in to the processor allowing you to have 64 bit machines running on your host. Memory The more the better! If you are building a home lab don’t bother with ECC unless you are going to run machines that absolutely should be on all the time and your comfort depends on it! Motherboard Depends on what you are going to do with storage: If you are going the NAS way then the number of SATA port/RAID capabilities do not really matter. If you decide to have a single server with lots of dedicated storage it obviously matters how much SATA ports you will have, alternatively you could use a RAID controller (but these set you back a pretty penny if you want one. DELL 6i’s are usually available for a good bargain if you can find one!). Easiest is to get one with a built-in graphics card (on-board) as you are just adding more heat, power usage and possible points of failure. Networking Just like your choice of motherboard the networking side tends to depend on how you want to go. A single virtualization host with local storage can usually get away with having a single network card, a cluster or server which uses iSCSI storage tends to have more than one teamed up :). Storage The dreaded beast from the dark! The horror which lives in the forest! The most difficult decision you are going to make in the building of your lab. Why you might ask? Simple my friend, having the right choice of storage can make or break your virtualization solution. The performance of you storage choice will have an important impact on the responsiveness of your virtual machines and the deployment of new machines. It also makes a run with your budget! If you decide to go the NAS route you will be dropping a lot more money than if you would be having just a bunch of disks sitting in a server and manually distributing the virtual machines over the disks. Platform I’m a Microsoftee so Hyper-V is a dead giveaway for me. If you are interested in using VMware I won’t stop you but the rest of my posts will be oriented on Server 2012 Hyper-V (aka 3.0)! What did I use? Before someone asks me this in the comments I’ll give you a quick run down of what I am using. - Intel 2.4 quad core processors (i something something) - 24 GB DDR3 Memory - Single disk in each server (might look at this as I move the servers to 2012) - Synology DS1812+ NAS - 3 network interfaces where possible - HP1800 procurve managed switch I decided to spring for the NAS as I will also be using it for backups and media storage (which is working out quite nicely with my Xbox 360 I must say). At the time of building my 2 boxes (over a year and a half ago) these set me back about 900 euros each so I can image you can build the same or better for a lower price. Next article will be diagramming what I want to achieve and starting a build on the Hyper V 3.0 cluster!

Read the article

Musings on the launch of SQL Monitor

- by Phil Factor

For several years, I was responsible for the smooth running of a large number of enterprise database servers. We ran a network monitoring tool that was primitive by today’s standards but which performed the useful function of polling every system, including all the Servers in my charge. It ran a configurable script for each service that you needed to monitor that was merely required to return one of a number of integer values. These integer values represented the pain level of the service, from 10 (“hurtin’ real bad”) to 1 (“Things is great”). Not only could you program the visual appearance of each server on the network diagram according to the value of the integer, but you could even opt to run a sound file. Very soon, we had a large TFT Screen, high on the wall of the server room, with every server represented by an icon, and a speaker next to it that would give out a series of grunts, groans, snores, shrieks and funeral marches, depending on the problem. One glance at the display, and you could dive in with iSQL/QA/SSMS and check what was going on with your favourite diagnostic tools. If you saw a server icon burst into flames on the screen or droop like a jelly, you dropped your mug of coffee to do it. It was real fun, but I remember it more for the huge difference it made to have that real-time visibility into how your servers are performing. The management soon stopped making jokes about the real reason we wanted the TFT screen. (It rendered DVDs beautifully they said; particularly flesh-tints). If you are instantly alerted when things start to go wrong, then there was a good chance you could fix it before being alerted to the problem by the users of the system. There is a world of difference between this sort of tool, one that gives whoever is ‘on watch’ in the server room the first warning of a potential problem on one of any number of servers, and the breed of tool that attempts to provide some sort of prosthetic DBA Brain. I like to get the early warning, to get the right information to help to diagnose a problem: No auto-fix, but just the information. I prefer to leave the task of ascertaining the exact cause of a problem to my own routines, custom code, intuition and forensic instincts. A simulated aircraft cockpit doesn’t do anything for me, especially before I know where I should be flying. Time has moved on, and that TFT screen is now, with SQL Monitor, an iPad or any other mobile or static device that can support a browser. Rather than trying to reproduce the conceptual topology of the servers, it lists them in their groups so as to give a display that scales with the increasing number of databases you monitor. It gives the history of the major events and trends for the servers. It gives the icons and colours that you can spot out of the corner of your eye, but goes on to give you just enough information in drill-down to give you a much clearer idea of where to look with your DBA tools and routines. It doesn't swamp you with information. Whereas a few server and database-level problems are pretty easily fixed, others depend on judgement and experience to sort out. Although the idea of an application that automates the bulk of a DBA’s skills is attractive to many, I can’t see it happening soon. SQL Server’s complexity increases faster than the panaceas can be created. In the meantime, I believe that the best way of helping DBAs is to make the monitoring process as simple and effective as possible, and provide the right sort of detail and ‘evidence’ to allow them to decide on the fix. In the end, it is still down to the skill of the DBA.

Read the article

What's wrong with my wireless?

- by dazzle

I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

Read the article

Need help with chronic slow wifi connections

- by mgeorge

I have had chronic slow wifi connections on several networks for a while now, I think since my update to 12.04 when it came out. I have tried many of the tips and tricks already available out there in the forums with no luck (wicd, etc..). I want to see if any of you experts out there might be able to help me, and thanks in advance!! I use ubuntu 12.04 on a lenovo ideapad y650, and most networks I connect to lose the connection frequently or do not give appropriate bandwidth when I am connected. Here are some results of the usual go-to system checks: cat /etc/lsb-release; uname -a: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Linux mgeorge-lenovo 3.2.0-48-generic-pae #74-Ubuntu SMP Thu Jun 6 20:05:01 UTC 2013 i686 i686 i386 GNU/Linux lspci -nnk | grep -iA2 net: 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlwifi -- 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) Subsystem: Lenovo Device [17aa:3878] Kernel driver in use: tg3 lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 090c:7371 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) iwconfig: lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Dyno" Mode:Managed Frequency:2.412 GHz Access Point: CC:5D:4E:46:0A:93 Bit Rate=150 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:948 Invalid misc:728 Missed beacon:0 eth0 no wireless extensions. rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod: Module Size Used by uvcvideo 67203 0 videodev 86588 1 uvcvideo nouveau 712674 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197641 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau mxm_wmi 12893 1 nouveau wmi 18744 1 mxm_wmi joydev 17393 0 arc4 12473 2 snd_hda_codec_realtek 174313 1 snd_hda_codec_hdmi 31775 1 snd_hda_intel 32719 3 snd_hda_codec 109562 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80916 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi psmouse 86520 0 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event serio_raw 13027 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq iwlwifi 366509 0 mac80211 436493 1 iwlwifi snd 62218 16 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,sn d_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 17890 0 sparse_keymap 13658 1 ideapad_laptop cfg80211 178877 2 iwlwifi,mac80211 ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 ir_rc5_decoder 12459 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 video 19115 1 nouveau ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir bnep 17830 2 rfcomm 38139 0 parport_pc 32114 0 bluetooth 158479 10 bnep,rfcomm ppdev 12849 0 binfmt_misc 17292 1 mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141414 0 nm-tool: NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: tg3 State: unavailable Default: no HW Address: 00:23:5A:CC:85:BD Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 [Dyno] -------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: yes HW Address: 00:22:FA:D0:94:CA Capabilities: Speed: 150 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) *Dyno: Infra, CC:5D:4E:46:0A:93, Freq 2412 MHz, Rate 54 Mb/s, Strength 81 WPA2 IPv4 Settings: Address: 10.0.0.43 Prefix: 24 (255.255.255.0) Gateway: 10.0.0.1 DNS: 10.0.0.1

Read the article

Web Safe Area (optimal resolution) for web app design?

- by M.A.X

I'm in the process of designing a new web app and I'm wondering for what 'Web Safe Area' should I optimize the app layout and design. By Web Safe Area I mean the actual area available to display the website in the browser (which is influenced by monitor resolution as well as the space taken up by the browser and OS) I did some investigation and thinking on my own but wanted to share this to see what the general opinion is. Here is what I found: Optimal Display Resolution: w3schools web stats seems to be the most referenced source (however they state that these are results from their site and is biased towards tech savvy users) http://www.w3counter.com/globalstats.php (aggregate data from something like 15,000 different sites that use their tracking services) StatCounter Global Stats Display Resolution (Stats are based on aggregate data collected by StatCounter on a sample exceeding 15 billion pageviews per month collected from across the StatCounter network of more than 3 million websites) NetMarketShare Screen Resolutions (marketshare.hitslink.com) (a web analytics consulting firm, they get data from browsers of site visitors to their on-demand network of live stats customers. The data is compiled from approximately 160 million visitors per month) Display Resolution Summary: There is a bit of variation between the above sources but in general as of Jan 2011 looks like 1024x768 is about 20%, while ~85% have a higher resolution of at least 1280x768 (1280x800 is the most common of these with 15-20% of total web, depending on the source; 1280x1024 and 1366x768 follow behind with 9-14% of the share). My guess would be that the higher resolution values will be even more common if we filter on North America, and even higher if we filter on N.American corporate users (unfortunately I couldn't find any free geographically filtered statistics). Another point to note is that the 1024x768 desktop user population is likely lower than the aforementioned 20%, seeing as the iPad (1024x768 native display) is likely propping up those number (the app I'm designing is flash based, Apple mobile devices don't support flash so iPad support isn't a concern). My recommendation would be to optimize around the 1280x768 constraint (*note: 1280x768 is actually a relatively rare resolution, but I think it's a valid constraint range considering that 1366x768 is relatively common and 1280 is the most common horizontal resolution). Browser + OS Constraints: To further add to the constraints we have to subtract the space taken up by the browser (assuming IE, which is the most space consuming) and the OS (assuming WinXP-Win7): Win7 has the biggest taskbar footprint at a height of 40px (XP's and Vista's is 30px) The default IE8 view uses up 25px at the bottom of the screen with the status bar and a further 120px at the top of the screen with the windows title bar and the browser UI (assuming the default 'favorites' toolbar is present, it would instead be 91px without the favorites toolbar). Assuming no scrollbar, we also loose a total of 4px horizontally for the window outline. This means that we are left with 583px of vertical space and 1276px of horizontal. In other words, a Web Safe Area of 1276 x 583 Is this a correct line of thinking? I'm really surprised that I couldn't find this type of investigation anywhere on the web. Lots of websites talk about designing for 1024x768, but that's only half the equation! There is no mention of browser/OS influences on the actual area you have to display the site/app. Any help on this would be greatly appreciated! Thanks. EDIT Another caveat to my line of thinking above is that different browsers actually take up different amounts of pixels based on the OS they're running on. For example, under WinXP IE8 takes up 142px on top of the screen (instead the aforementioned 120px for Win7) because the file menu shows up by default on XP while in Win7 the file menu is hidden by default. So it looks like on WinXP + IE8 the Web Safe Area would be a mere 572px (768px-142-30-24=572)

Read the article

Is Your Company Social on the Inside?

- by Mike Stiles

As we talk about the extension of social from an outbound-facing marketing tool to a platform that will reach across the entire enterprise, servicing multiple functions of that enterprise, it might be time to take a look at how social can be effectively employed for internal communications. Remember the printed company newsletter? Yeah, nobody reads it. Remember the emailed company newsletter? Yeah, nobody reads it. Why not? Shouldn’t your employees care about the company more than anything else in life and be voraciously hungry for any information related to it? The more realistic prospect is that a company’s employees don’t behave much differently at work where information is concerned than they do in their personal lives. They “tune in” to information that’s immediately relevant to them, that peaks their interest, and/or that’s presented in a visually engaging way. That currently makes an internal social platform the most ideal way to communicate within the organization. It not only facilitates more immediate, more targeted (and thus more relevant) messaging from the company out to employees, it sets a stage for employees to communicate with each other and efficiently get answers to questions from peers. It’s a collaboration tool on steroids. If you build such an internal social portal and you do it right, will employees use it? Considering social media has officially been declared more addictive than cigarettes, booze and sex…probably. But what does it mean to do an internal social platform “right”? The bar has been set pretty high. Your employees are used to Twitter and Facebook, and would roll their eyes at anything less simple or harder to navigate than those. All the Facebook best practices would apply to your internal social as well, including the importance of managing posting frequency, using photos and video, moderation & response, etc. And don’t worry, you won’t be the first to jump in. WPP's global digital agency Possible has its own social network called Colab. Nestle has “The Nest.” Red Robin’s got one. I myself got an in-depth look at McGraw-Hill’s internal social platform at Blogwell NYC. Some of these companies are building their own platforms, others are buying them off the shelf or customizing readymade solutions. But you won’t be the last either. Prescient Digital Media and the IABC learned 39% of companies don’t offer employees any social tools. Not a social network, not discussion forums, not even IM. And a great many continue to ban the use of Facebook and Twitter on the premises. That’s pretty astonishing since social has become as essential a modern day communications tool as the telephone. But such holdouts will pay a big price for being mired in fear while competitors exploit social connections unchallenged. Fish where the fish are. If social has become the way people communicate and take in information, let that be the way communication is trafficked in the organization.

Read the article

JEP 124: Enhance the Certificate Revocation-Checking API

- by smullan

Revocation checking is the mechanism to determine the revocation status of a certificate. If it is revoked, it is considered invalid and should not be used. Currently as of JDK 7, the PKIX implementation of java.security.cert.CertPathValidator includes a revocation checking implementation that supports both OCSP and CRLs, the two main methods of checking revocation. However, there are very few options that allow you to configure the behavior. You can always implement your own revocation checker, but that's a lot of work. JEP 124 (Enhance the Certificate Revocation-Checking API) is one of the 11 new security features in JDK 8. This feature enhances the java.security.cert API to support various revocation settings such as best-effort checking, end-entity certificate checking, and mechanism-specific options and parameters. Let's describe each of these in more detail and show some examples. The features are provided through a new class named PKIXRevocationChecker. A PKIXRevocationChecker instance is returned by a PKIX CertPathValidator as follows: CertPathValidator cpv = CertPathValidator.getInstance("PKIX"); PKIXRevocationChecker prc = (PKIXRevocationChecker)cpv.getRevocationChecker(); You can now set various revocation options by calling different methods of the returned PKIXRevocationChecker object. For example, the best-effort option (called soft-fail) allows the revocation check to succeed if the status cannot be obtained due to a network connection failure or an overloaded server. It is enabled as follows: prc.setOptions(Enum.setOf(Option.SOFT_FAIL)); When the SOFT_FAIL option is specified, you can still obtain any exceptions that may have been thrown due to network issues. This can be useful if you want to log this information or treat it as a warning. You can obtain these exceptions by calling the getSoftFailExceptions method: List<CertPathValidatorException> exceptions = prc.getSoftFailExceptions(); Another new option called ONLY_END_ENTITY allows you to only check the revocation status of the end-entity certificate. This can improve performance, but you should be careful using this option, as the revocation status of CA certificates will not be checked. To set more than one option, simply specify them together, for example: prc.setOptions(Enum.setOf(Option.SOFT_FAIL, Option.ONLY_END_ENTITY)); By default, PKIXRevocationChecker will try to check the revocation status of a certificate using OCSP first, and then CRLs as a fallback. However, you can switch the order using the PREFER_CRLS option, or disable the fallback altogether using the NO_FALLBACK option. For example, here is how you would only use CRLs to check the revocation status: prc.setOptions(Enum.setOf(Option.PREFER_CRLS, Option.NO_FALLBACK)); There are also a number of other useful methods which allow you to specify various options such as the OCSP responder URI, the trusted OCSP responder certificate, and OCSP request extensions. However, one of the most useful features is the ability to specify a cached OCSP response with the setOCSPResponse method. This can be quite useful if the OCSPResponse has already been obtained, for example in a protocol that uses OCSP stapling. After you have set all of your preferred options, you must add the PKIXRevocationChecker to your PKIXParameters object as one of your custom CertPathCheckers before you validate the certificate chain, as follows: PKIXParameters params = new PKIXParameters(keystore); params.addCertPathChecker(prc); CertPathValidatorResult result = cpv.validate(path, params); Early access binaries of JDK 8 can be downloaded from http://jdk8.java.net/download.html

Read the article

Optimal Data Structure for our own API

- by vermiculus

I'm in the early stages of writing an Emacs major mode for the Stack Exchange network; if you use Emacs regularly, this will benefit you in the end. In order to minimize the number of calls made to Stack Exchange's API (capped at 10000 per IP per day) and to just be a generally responsible citizen, I want to cache the information I receive from the network and store it in memory, waiting to be accessed again. I'm really stuck as to what data structure to store this information in. Obviously, it is going to be a list. However, as with any data structure, the choice must be determined by what data is being stored and what how it will be accessed. What, I would like to be able to store all of this information in a single symbol such as stack-api/cache. So, without further ado, stack-api/cache is a list of conses keyed by last update: `(<csite> <csite> <csite>) where <csite> would be (1362501715 . <site>) At this point, all we've done is define a simple association list. Of course, we must go deeper. Each <site> is a list of the API parameter (unique) followed by a list questions: `("codereview" <cquestion> <cquestion> <cquestion>) Each <cquestion> is, you guessed it, a cons of questions with their last update time: `(1362501715 <question>) (1362501720 . <question>) <question> is a cons of a question structure and a list of answers (again, consed with their last update time): `(<question-structure> <canswer> <canswer> <canswer> and ` `(1362501715 . <answer-structure>) This data structure is likely most accurately described as a tree, but I don't know if there's a better way to do this considering the language, Emacs Lisp (which isn't all that different from the Lisp you know and love at all). The explicit conses are likely unnecessary, but it helps my brain wrap around it better. I'm pretty sure a <csite>, for example, would just turn into (<epoch-time> <api-param> <cquestion> <cquestion> ...) Concerns: Does storing data in a potentially huge structure like this have any performance trade-offs for the system? I would like to avoid storing extraneous data, but I've done what I could and I don't think the dataset is that large in the first place (for normal use) since it's all just human-readable text in reasonable proportion. (I'm planning on culling old data using the times at the head of the list; each inherits its last-update time from its children and so-on down the tree. To what extent this cull should take place: I'm not sure.) Does storing data like this have any performance trade-offs for that which must use it? That is, will set and retrieve operations suffer from the size of the list? Do you have any other suggestions as to what a better structure might look like?

Read the article

Can't start managed server in Oracle Weblogic 10.3.2

- by Neuquino

I installed Oracle SOA Suite 11g. I start the NodeManager successfully. I start the AdminServer successfully. When I go to start the soa serve (soa_server1) I get this output: NMProcess: <Mar 15, 2010 3:33:30 PM> <WARNING> <Exception while starting server 'soa_server1'> NMProcess: java.io.IOException: Server failed to start up. See server output log for more details. NMProcess: at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331) NMProcess: at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541) NMProcess: at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:116) NMProcess: at weblogic.nodemanager.server.Handler.run(Handler.java:70) NMProcess: at java.lang.Thread.run(Thread.java:619) NMProcess: NMProcess: Mar 15, 2010 3:33:30 PM weblogic.nodemanager.server.Handler handleStart NMProcess: WARNING: Exception while starting server 'soa_server1' NMProcess: java.io.IOException: Server failed to start up. See server output log for more details. NMProcess: at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331) NMProcess: at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541) NMProcess: at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:116) NMProcess: at weblogic.nodemanager.server.Handler.run(Handler.java:70) NMProcess: at java.lang.Thread.run(Thread.java:619) Error Starting server soa_server1: weblogic.nodemanager.NMException: Exception while starting server 'soa_server1' In the log file I've got this: Enter username to boot WebLogic server:Enter password to boot WebLogic server: There are 1 nested errors: weblogic.management.ManagementException: Booting as admin server, but servername, soa_server1, does not match the admin server name, AdminServer at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67) at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461) at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166) at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749) at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446) at weblogic.Server.main(Server.java:67) > <Mar 15, 2010 3:33:30 PM ART> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED> <Mar 15, 2010 3:33:30 PM ART> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down> <Mar 15, 2010 3:33:30 PM ART> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN> <Mar 15, 2010 3:33:30 PM> <FINEST> <NodeManager> <Waiting for the process to die: 31144> <Mar 15, 2010 3:33:30 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted> <Mar 15, 2010 3:33:30 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters> Do you have any clue of what is happening? If you need more info, just ask for it. thanks in advance

Read the article

SQL Server 2008 R2 Enterprise won't install on Windows 2008 R2 Enterprise

- by Carlos Paulino

I've been trying to install SQL Server on a new Windows Server 2008. I have tried everything but I haven't been able to narrow down the problem. When the installation fails I get " Exit code (Decimal): -2068643839". The problem with this is that according to Microsoft this is a generic error code. I follow their guide to look into the detail.txt inside C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\ But I can't find something that specifies the exact error. Any suggestions ? Thanks in advanced. I uploaded to detail.txt to http://www.megaupload.com/?d=0MV46SZH because it is to big to paste here. Below is the summary.txt ---------- Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2011-02-28 11:29:56 End time: 2011-02-28 11:34:45 Requested action: Install Machine Properties: Machine name: SA-SERVER Machine processor count: 8 OS version: Windows Server 2008 R2 OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: F:\x64\setup\ Installation edition: ENTERPRISE User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\SYSTEM AGTSVCPASSWORD: ***** AGTSVCSTARTUPTYPE: Manual ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: <empty> ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: <empty> ASSVCPASSWORD: ***** ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: <empty> ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Disabled CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini CUSOURCE: ENABLERANU: False ENU: True ERRORREPORTING: False FARMACCOUNT: <empty> FARMADMINPORT: 0 FARMPASSWORD: ***** FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK,OCS FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: <empty> FTSVCACCOUNT: <empty> FTSVCPASSWORD: ***** HELP: False IACCEPTSQLSERVERLICENSETERMS: False INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\ INSTALLSQLDATADIR: <empty> INSTANCEDIR: D:\SQLServer INSTANCEID: MSSQLSERVER INSTANCENAME: MSSQLSERVER ISSVCACCOUNT: NT AUTHORITY\SYSTEM ISSVCPASSWORD: ***** ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: ***** PCUSOURCE: PID: ***** QUIET: False QUIETSIMPLE: False ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: ***** RSSVCSTARTUPTYPE: Automatic SAPWD: ***** SECURITYMODE: SQL SQLBACKUPDIR: <empty> SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT AUTHORITY\SYSTEM SQLSVCPASSWORD: ***** SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SA-SERVER\Administrator SQLTEMPDBDIR: <empty> SQLTEMPDBLOGDIR: <empty> SQLUSERDBDIR: <empty> SQLUSERDBLOGDIR: <empty> SQMREPORTING: False TCPENABLED: 1 UIMODE: Normal X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Integration Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Connectivity Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Complete Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Backwards Compatibility Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Business Intelligence Development Studio Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Microsoft Sync Framework Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\SystemConfigurationCheck_Report.htm

Read the article

broadcom 5722 NIC not installed on Ubuntu Server, although driver present

- by Bastien

Hello, I just installed Ubuntu Server 10.04 LTS, running kernel 2.6.32-24-server, on a brand new Dell T110 server, supposedly fully compatible with Ubuntu Server. I have two NICs: one ONBOARD, the other additional on PCI. both of them are Broadcom netXtreme 5572. on the first boot of the system, I could see both cards as eth0 and eth1 (with ifconfig) I configured eth0 as static IP (as planned), and did not configure eth1. after rebooting, one of the two NICs "disappeared": it does not appear in ifconfig at all. the one that disappeared is the ONBOARD one. I investigated a bit and found the following things: the card is SEEN, but not "installed", it appears as "UNCLAIMED" in lshw: *-network UNCLAIMED description: Ethernet controller product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress cap_list configuration: latency=0 resources: memory:df9f0000-df9fffff *-network description: Ethernet interface product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 00 serial: 00:10:18:60:23:64 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.102 duplex=full firmware=5722-v3.09 ip=10.129.167.25 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:35 memory:dfaf0000-dfafffff so I checked my dmesg and found a few strange lines, showing, there actually is a problem bringing up this card: [ 3.737506] tg3: Could not obtain valid ethernet address, aborting. [ 3.737527] tg3 0000:04:00.0: PCI INT A disabled [ 3.737535] tg3: probe of 0000:04:00.0 failed with error -22 [ 3.737553] alloc irq_desc for 17 on node -1 [ 3.737555] alloc kstat_irqs on node -1 [ 3.737560] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.737566] tg3 0000:05:00.0: setting latency timer to 64 [ 3.793529] eth0: Tigon3 [partno(BCM95722A2202G) rev a200] (PCI Express) MAC address 00:10:18:60:23:64 [ 3.793532] eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.793534] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.793536] eth0: dma_rwctrl[76180000] dma_mask[64-bit] that actually shows that one NIC is recognized, the other is not. I researched a bit more, with lspci -v: 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: fast devsel, IRQ 16 Memory at df9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-00-00-fe-ff-00-00-00 Kernel modules: tg3 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: bus master, fast devsel, latency 0, IRQ 35 Memory at dfaf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 64-23-60-fe-ff-18-10-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3 Kernel modules: tg3 here I could see that the MAC address is 00-00-00-FE-FF-00-00-00, which, according to some forum posts on several websites, could be an issue. I've researched everything I could on the net, and found out several people having slightly comparable issues, but they usually involve different HW, and do not provide a proper explanation / solution... I would appreciate if anyone around here has some info to share ! thanks

Read the article

Integrating HP Systems Insight Manager into an existing environment

- by ewwhite

I'm working with an environment that spans multiple data centers/sites and consists primarily of HP ProLiant servers (G5-G7) running Linux. The mix is 30% RHEL/CentOS, the rest are Gentoo :(. I also have a few dozen virtual machines running back-office and Windows servers on VMWare ESX hosts. I run OpenNMS to pull SNMP data from the various server nodes and networking devices. While OpenNMS works wonderfully for up/down, thresholds and notifications, it's native handling of traps is a little rough and the graphs are not particularly pretty. I use Orca/RRD graphs for performance trending and nice graphs. I'm tasked with inventorying the environment and wanted to come up with a clean way to organize server information. Since my environment is mostly HP, I've been playing with HP Systems Insight Manager as a way to extract server data and to deploy HP health/monitoring packages and firmware. The Gentoo systems eventually have to be converted to CentOS, so getting a quick assessment of what hardware is where would be great. Although I've read through a few hundred pages of HP manuals, I'm having a difficult time understanding how to get HP SIM to do what I want, though. My main problems are: I have about 40 subnets to deal with; 98% connected with private lines to facilities across the globe. I don't want to initiate an HP SIM discovery only to pull back every piece of intermediate networking hardware and equipment from all of the locations. I'd like this to focus on the servers. I have OpenNMS configured to accept traps. I don't want HP SIM to duplicate that effort. It seems like the built-in software deployment tool wants to overwrite the trapsink parameters for the systems it encounters during discovery. I have about 10 administrative username/password combinations in use across this infrastructure. Is there a more efficient way to get HP SIM to do the discovery or break discovery into manageable chunks? In terms of general workflow, do people typically install the HP Management Agents during the initial OS deployment (e.g. kickstart post script) or afterwards from HP SIM? Is HP SIM too thick/fat to be an inventory tool? I can't tell if it's meant to be used standalone or alongside other monitoring products. Since the majority of the systems I'm trying to track are those running Gentoo (in order to plan the move to CentOS), is there any way for HP SIM to extract system model information from them ( like dmidecode)? I have systems here where I may have an SSH key established, but not direct user or login access. Is there a way for me to import an SSH private/public key pair into HP SIM to reach out to the servers that can't accept standard credentials? There are a handful of sites where I have inconsistent access or have a double-NAT situation. I may be able to poke a server, but it may not be able to find its way back to the management system. Is there a workaround for this? The certificate configuration for HP SIM seems complicated. What is the preferred setup for trust between systems? I'd also appreciate any notes or recommendations to using this product. Or if there's a better way to do this, I'd like to know.

Read the article

Windows 2008 Unknown Disks

- by Ailbe

I have a BL460c G7 blade server with OS Windows 2008 R2 SP1. This is a brand new C7000 enclosure, with FlexFabric interconnects. I got my FC switches setup and zoned properly to our Clariion CX4, and can see all the hosts that are assigned FCoE HBAs on both paths in both Navisphere and in HP Virtual Connect Manager. So I went ahead and created a storage group for a test server, assigned the appropriate host, assigned the LUN to the server. So far so good, log onto server and I can see 4 unknown disks.... No problem, I install MS MPIO, no luck, can't initialize the disks, and the multiple disks don't go away. Still no problem, I install PowerPath version 5.5 reboot. Now I see 3 disks. One is initialized and ready to go, but I still have 2 disks that I can't initialize, can't offline, can't delete. If I right click in storage manager and go to properties I can see that the MS MPIO tab, but I can't make a path active. I want to get rid of these phantom disks, but so far nothing is working and google searches are showing up some odd results, so obviously I'm not framing my question right. I thought I'd ask here real quick. Does anyone know a quick way to get rid of these unknown disks. Another question, do I need the MPIO feature installed if I have PowerPath installed? This is my first time installing Windows 2008 R2 in this fashion and I'm not sure if that feature is needed or not right now. So some more information to add to this. It seems I'm dealing with more of a Windows issue than anything else. I removed the LUN from the server, uninstalled PowerPath completely, removed the MPIO feature from the server, and rebooted twice. Now I am back to the original 4 Unknown Disks (plus the local Disk 0 containing the OS partition of course, which is working fine) I went to diskpart, I could see all 4 Unknown disks, I selected each disk, ran clean (just in case i'd somehow brought them online previously as GPT and didn't realize it) After a few minutes I was no longer able to see the disks when I ran list disk. However, the disks are still in Disk Management. When I try and offline the disks from Disk Management I get an error: Virtual Disk Manager - The system cannot find the file specified. Accompanied by an error in System Event Logs: Log Name: System Source: Virtual Disk Service Date: 6/25/2012 4:02:01 PM Event ID: 1 Task Category: None Level: Error Keywords: Classic User: N/A Computer: hostname.local Description: Unexpected failure. Error code: 2@02000018 Event Xml: 1 2 0 0x80000000000000 4239 System hostname.local 2@02000018 I feel sure there is a place I can go in the Registry to get rid of these, I just can't recall where and I am loathe to experiement. So to recap, there are currently no LUNS attached at all, I still have the phantom disks, and I'm getting The system cannot find the file specified from Virtual Disk Manager when I try to take them offline. Thanks!

Read the article

Recommendations for distributed processing/distributed storage systems

- by Eddie

At my organization we have a processing and storage system spread across two dozen linux machines that handles over a petabyte of data. The system right now is very ad-hoc; processing automation and data management is handled by a collection of large perl programs on independent machines. I am looking at distributed processing and storage systems to make it easier to maintain, evenly distribute load and data with replication, and grow in disk space and compute power. The system needs to be able to handle millions of files, varying in size between 50 megabytes to 50 gigabytes. Once created, the files will not be appended to, only replaced completely if need be. The files need to be accessible via HTTP for customer download. Right now, processing is automated by perl scripts (that I have complete control over) which call a series of other programs (that I don't have control over because they are closed source) that essentially transforms one data set into another. No data mining happening here. Here is a quick list of things I am looking for: Reliability: These data must be accessible over HTTP about 99% of the time so I need something that does data replication across the cluster. Scalability: I want to be able to add more processing power and storage easily and rebalance the data on across the cluster. Distributed processing: Easy and automatic job scheduling and load balancing that fits with processing workflow I briefly described above. Data location awareness: Not strictly required but desirable. Since data and processing will be on the same set of nodes I would like the job scheduler to schedule jobs on or close to the node that the data is actually on to cut down on network traffic. Here is what I've looked at so far: Storage Management: GlusterFS: Looks really nice and easy to use but doesn't seem to have a way to figure out what node(s) a file actually resides on to supply as a hint to the job scheduler. GPFS: Seems like the gold standard of clustered filesystems. Meets most of my requirements except, like glusterfs, data location awareness. Ceph: Seems way to immature right now. Distributed processing: Sun Grid Engine: I have a lot of experience with this and it's relatively easy to use (once it is configured properly that is). But Oracle got its icy grip around it and it no longer seems very desirable. Both: Hadoop/HDFS: At first glance it looked like hadoop was perfect for my situation. Distributed storage and job scheduling and it was the only thing I found that would give me the data location awareness that I wanted. But I don't like the namename being a single point of failure. Also, I'm not really sure if the MapReduce paradigm fits the type of processing workflow that I have. It seems like you need to write all your software specifically for MapReduce instead of just using Hadoop as a generic job scheduler. OpenStack: I've done some reading on this but I'm having trouble deciding if it fits well with my problem or not. Does anyone have opinions or recommendations for technologies that would fit my problem well? Any suggestions or advise would be greatly appreciated. Thanks!

Read the article

Linux bcm43224 wifi adapter slows down a couple minutes after boot

- by Blubber

I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

Read the article

vconfig created virtual interface and trunking - is the the interface untagged or tagged for that VLAN ID?

- by kce

I am trying to setup an additional VLAN on our Debian-based router/firewall (which exists as a virtual machine on Hyper-V), our core switch (an HP Procurve 5406) and a remote HP ProCurve 2610 that is connected via a WAN Transparent Lan Service (TLS) link. Let's work backwards from the network edge: The Debian server has an external connection attached to eth0. The internal interface is eth1, which is connected directly from our Hyper-V host to the 5406. The port that eth1 is attached to is setup as Trk12. The 2610 is attached to Trk9 (which trunks a whole slew of VLANs - Trk9 is our TLS head). I can successfully ping the management IP addresses for my VLAN from both switches but I cannot ping, from either switch, the virtual interface for my new VLAN on the Debian-base router and firewall. The existing VLAN works fine. What gives? The port eth1 is attached to is a trunk, the existing VLAN (ID 98) is untagged on the trunk, the new VLAN (ID 198) is tagged. VLAN 198 is tagged on Trk9 on the 5406 and on the 2610. I can ping the other switch's management IP (10.100.198.2 and 10.100.198.3) from the other respective switch. That leg of the VLAN works - however I cannot communicate with eth1.198's 10.100.198.1. I feel like I'm missing something elementary but what it is remains illusive to me. I suspect the issue is with the vconfig created eth1.198. It should pass the tagged VLAN 198 packets correct? But they cannot seem to get any further than the 5406. Communication on the existing VLAN 98 works fine. From the Debian box: eth1: eth1 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.0.1 Bcast:10.100.255.255 Mask:255.255.0.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12179786 errors:0 dropped:0 overruns:0 frame:0 TX packets:20210532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1586498028 (1.4 GiB) TX bytes:26154226278 (24.3 GiB) Interrupt:9 Base address:0xec00 eth1.198: eth1.198 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.198.1 Bcast:10.100.198.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1496 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:72 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:3528 (3.4 KiB) # cat /proc/net/vlan/eth1.198: eth1.198 VID: 198 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 72 total bytes transmitted 3528 total headroom inc 0 total encap on xmit 39 Device: eth1 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: # ip route 10.100.198.0/24 dev eth1.198 proto kernel scope link src 10.100.198.1 206.174.64.0/20 dev eth0 proto kernel scope link src 206.174.66.14 10.100.0.0/16 dev eth1 proto kernel scope link src 10.100.0.1 default via 206.174.64.1 dev eth0 # iptables -L -v Chain INPUT (policy DROP 6875 packets, 637K bytes) pkts bytes target prot opt in out source destination 41 4320 ACCEPT all -- lo any anywhere anywhere 11481 1560K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 107 8058 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- eth1 any 10.100.0.0/24 anywhere tcp dpt:ssh 701 317K ACCEPT udp -- eth1 any anywhere anywhere udp dpts:bootps:bootpc Chain FORWARD (policy DROP 1 packets, 40 bytes) pkts bytes target prot opt in out source destination 156K 25M ACCEPT all -- eth1 any anywhere anywhere 215K 248M ACCEPT all -- eth0 eth1 anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth1.198 any anywhere anywhere 0 0 ACCEPT all -- eth0 eth1.198 anywhere anywhere state RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT 13048 packets, 1640K bytes) pkts bytes target prot opt in out source destination From the 5406: # show vlan ports trk12 detail Status and Counters - VLAN Information - for ports Trk12 VLAN ID Name | Status Voice Jumbo Mode ------- -------------------- + ---------- ----- ----- -------- 98 WIFI | Port-based No No Untagged 198 VLAN198 | Port-based No No Tagged

Read the article

Do hard drive enclosures fail/is it the HDD or enclosure?

- by x0a

I'm having a whole host of problems with an external hard drive that was working just fine a couple of hours ago. I've had this problem before once, and that was about 3 months ago, here's what I documented: So a couple of hours ago I turned off all my computers and shut off the power to all my devices in my room, then went and turned the power off at the main switch so I could change an outlet. A couple hours later, after I've already slowly turned everything back on, I go to my xbox to try and watch a movie and it can't seem to list any of the movies I've got. So I go to my desktop to find that my external hard drive isn't there.. even though it's on and connected. It's also stationary and hidden behind something so there's not a whole lot of tampering/physical wear to that external. I plug it into my laptop to try and see what's going on. It starts making this endless loud screeching noise. None of that clicking that's usually associated with hd damage. It's not listed in my computers, and it shows up in Disk Management as "uninitialized" asking me to choose between two different partition types. After carefully disconnecting it and connecting it back, it asks me to format it, which I cancel. I start googling about my issue, starting to accept the situation, torn as hell and helpless and just about ready to toss the thing. Suddenly the screeching stops, after almost 45 minutes of it going, and Disk Management lists the drive as "Online" and "Healthy". Explorer pops up with all my files! I'm still being really careful with it and weary and treating it as though it's in fragile shape. I've downloaded some S.M.A.R.T. software to read the values and everything is listed as "OK" . No reallocated sectors, no read errors, no seek errors. I also ran a quick self-test, which completed without error. Everything seems fine. It looks to be a perfectly healthy external hard drive. So what the hell was that about? Was it doing some sort of maintenance or self-test? How am I supposed to tell the difference? I would've undoubtedly killed the drive for sure if had it gone on a bit longer. I've got the same problem now, with one exception: it doesn't magically reappear after the screeching stops. Occasionally I manage to get some S.M.A.R.T. diagnostics information, which basically reads everything as fine. The only problem is that my HD isn't initializing (so I can't access anything in it). I'm able to successfully run a quick smart test but not an extended one (I've only tried it once but got conflicting indications as to whether it was actually making any progress or not (was stuck on Random read test). So, final question (if all else fails): Could the hard drive enclosure be failing rather than the HDD? Is this a likely possibility at all? How would I know?

Read the article

Clarification On Write-Caching Policy, Its Underlying Options And How It Applies To Hard Drives And Solid-State Drives

- by Boris_yo

In last week after doing more research on subject matter, I have been wondering about what I have been neglecting all those years to understand write-caching policy, always leaving it on default setting. Write-caching policy improves writing performance and consists of write-back caching and write-cache buffer flushing. This is how I understand all the above, but correct me if I erred somewhere: Write-through cache / Write-through caching itself is not a part of write caching policy per se and it's when data is written to both cache and storage device so if Windows will need that data later again, it is retrieved from cache and not from storage device which means only improved read performance as there is no need for waiting for storage device to read required data again. Since data is still written to storage device, write performance isn't improved and represents no risk of data loss or corruption in case of power failure or system crash while only data in cache gets lost. This option seems to be enabled by default and is recommended for removable devices with no need to use function of "Safely Remove Hardware" on user's part. Write-back caching is similar to above but without writing data to storage device, periodically releasing data from cache and writing to storage device when it is idle. In my opinion this option improves both read and write performance but represents risk if power failure or system crash occurs with the outcome of not only losing data eventually to be written to storage device, but causing file inconsistencies or corrupted file system. Write-back caching cannot be enabled together with write-through caching and it is not recommended to be enabled if no backup power supply is availabe. Write-cache buffer flushing I reckon is similar to write-back caching but enables immediate release and writing of data from cache to storage device right before power outage occurs but I don't know if it applies also to occasional system crash. This option seem to be complementary to write-back cache reducing or potentially eliminating risk of data loss or corruption of file system. I have questions about relevance of last 2 options to today's modern SSDs in order to get best performance and with less wear on SSDs: I know that traditional hard drives come with onboard cache (I wonder what type of cache that is), but do SSDs also come with cache? Assuming they do, is this cache faster than their NAND flash and system RAM and worth taking the risk of utilizing it by enabling write-back cache? I read somewhere that generally storage device's cache is faster than RAM, but I want to be sure. Additionally I read that write-caching should be enabled since current data that is to be written later to NAND flash is kept for a while in cache and provided there is data that gets modified a lot before finally being written, holding of this data and its periodic release reduces its write times to SSD thereby reducing its wearing. Now regarding to write-cache buffer flushing, I heard that SSD controllers are so fast by themselves that enabling this option is not required, because they manage flushing. However, once again, I don't know if SSDs have their own onboard cache and whether or not it is faster than their NAND flash and system RAM because if it is, keeping this option enabled would make sense. Recently I have posted question about issue with my Intel 330 SSD 120GB which was main reason to do deeper research having suspicion of write-caching policy being the culprit of SSD's freezing issue assuming data being released is what causes freezes. Currently I have write-cache enabled and write-cache buffer flushing disabled because I believe SSD controller's management of write-cache flushing and Windows write-cache buffer flushing are conflicting with each other: Since I want to troubleshoot in small steps to finally determine the source of issue, I have decided to start with write-caching policy and the move to drivers, switching to AHCI later on and finally disabling DIPM (device initiated power management) through registry modification thanks to @TomWijsman

Read the article

Vista 64-bit, DISK BOOT FAILURE

- by weka

So I have this Acer Aspire AX3200-U3600A with Windows Vista (64-bit). Every night I turn it off and turn it back on in the morning. Around three weeks ago, I did a fresh factory reimage. Good as new. Then around two days ago, when I turned it on, I noticed it was running extremly slow. As in, it would often freeze up while I had multiple applications open when it usually never froze up. So I decided to restart my computer. Big mistake. My computer froze right after I clicked shut-down. I waited a while. Nothing. Waited some minutes. Nope. I decided to shut it down by pressing the power button. Here is where the problems begin. When I turned it back on, I saw the Windows logo and loading bar and then it loaded to black. I turned it off again forcefully by power button and then once more... then I got: AMD Data Change... Update New Data to DMI! then later the screen clears and I get: AHCI Option ROM BIOS Revision: 01.05.92 Date: 02-19-2008 Copyright (c) 2006-2008 Phoenix Technologies, LTD Port 01: Reset Port Error!! Port 02: then the screen clears again but this time, this loads from the bottom: Nvidia Boot Agent 249.0542 (copyright stuff... blah blah) PXE-E61: Media test failure, check cable. PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. So I try to go into Safe Mode. Well, first of all it doesn't load as fast. After it loads disk.sys from windows/drivers, it will wait a while (2-3 mins) THEN load. However it loads the Acer eRecovery Management Tool. I have three options: Reset computer to factory default, Restore computer from user's backup, or Exit. However, the top two options are gray and disabled where as the Exit is in blue and definitely clickable. So obviously safe mode is not there... A strong thing to note: In the beginning when all of this started, I did a Boot Windows Normal from pressing f8 and I got to my desktop! It logged me in. I could see the icons on my files. However my desktop was extremely slow as in when I clicked on the Start menu, it would wait a while, then load up the menu with JUST the gradient, no text or icons... so as you can see... it saw my HDD? Also, before anyone says, I have NO USB plugged in. My mouse and keyboard are not USB inputs, I assure you. And this came without a recovery CD AND when I went in BIOS, to change the BOOT ORDER, I did NOT see a CD-ROM option. And when I tried pressing ALT+F10 to get into Acer eRecovery Management, the top two options were disabled as well. But sometimes on start-up, I get: Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removeable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occured. Then I tried Last Known Good Configuration Settings, that gives me a BSOD. What should I do/

Read the article

Integrate SharePoint 2010 with Team Foundation Server 2010

- by Martin Hinshelwood

Our client is using a brand new shiny installation of SharePoint 2010, so we need to integrate our upgraded Team Foundation Server 2010 instance into it. In order to do that you need to run the Team Foundation Server 2010 install on the SharePoint 2010 server and choose to install only the “Extensions for SharePoint Products and Technologies”. We want out upgraded Team Project Collection to create any new portal in this SharePoint 2010 server farm. There a number of goodies above and beyond a solution file that requires the install, with the main one being the TFS2010 client API. These goodies allow proper integration with the creation and viewing of Work Items from SharePoint a new feature with TFS 2010. This works in both SharePoint 2007 and SharePoint 2010 with the level of integration dependant on the version of SharePoint that you are running. There are three levels of integration with “SharePoint Services 3.0” or “SharePoint Foundation 2010” being the lowest. This level only offers reporting services framed integration for reporting along with Work Item Integration and document management. The highest is Microsoft Office SharePoint Services (MOSS) Enterprise with Excel Services integration providing some lovely dashboards. Figure: Dashboards take the guessing out of Project Planning and estimation. Plus writing these reports would be boring! The Extensions that you need are on the same installation media as the main TFS install and the only difference is the options you pick during the install. Figure: Installing the TFS 2010 Extensions for SharePoint Products and Technologies onto SharePoint 2010 Annoyingly you may need to reboot a couple of times, but on this server the process was MUCH smother than on our internal server. I think this was mostly to do with this being a clean install. Once it is installed you need to run the configuration. This will add all of the Solution and Templates that are needed for SharePoint to work properly with TFS. Figure: This is where all the TFS 2010 goodies are added to your SharePoint 2010 server and the TFS 2010 object model is installed. Figure: All done, you have everything installed, but you still need to configure it Now that we have the TFS 2010 SharePoint Extensions installed on our SharePoint 2010 server we need to configure them both so that they will talk happily to each other. Configuring the SharePoint 2010 Managed path for Team Foundation Server 2010 In order for TFS to automatically create your project portals you need a wildcard managed path setup. This is where TFS will create the portal during the creation of a new Team project. To find the managed paths page for any application you need to first select the “Managed web applications” link from the SharePoint 2010 Central Administration screen. Figure: Find the “Manage web applications” link under the “Application Management” section. On you are there you will see that the “Managed Paths” are there, they are just greyed out and selecting one of the applications will enable it to be clicked. Figure: You need to select an application for the SharePoint 2010 ribbon to activate. Figure: You need to select an application before you can get to the Managed Paths for that application. Now we need to add a managed path for TFS 2010 to create its portals under. I have gone for the obvious option of just calling the managed path “TFS02” as the TFS 2010 server is the second TFS server that the client has installed, TFS 2008 being the first. This links the location to the server name, and as you can’t have two projects of the same name in two separate project collections there is unlikely to be any conflicts. Figure: Add a “tfs02” wildcard inclusion path to your SharePoint site. Configure the Team Foundation Server 2010 connection to SharePoint 2010 In order to have you new TFS 2010 Server talk to and create sites in SharePoint 2010 you need to tell the TFS server where to put them. As this TFS 2010 server was installed in out-of-the-box mode it has a SharePoint Services 3.0 (the free one) server running on the same box. But we want to change that so we can use the external SharePoint 2010 instance. Just open the “Team Foundation Server Administration Console” and navigate to the “SharePoint Web Applications” section. Here you click “Add” and enter the details for the Managed path we just created. Figure: If you have special permissions on your SharePoint you may need to add accounts to the “Service Accounts” section. Before we can se this new SharePoint 2010 instance to be the default for our upgraded Team Project Collection we need to configure SharePoint to take instructions from our TFS server. Configure SharePoint 2010 to connect to Team Foundation Server 2010 On your SharePoint 2010 server open the Team Foundation Server Administration Console and select the “Extensions for SharePoint Products and Technologies” node. Here we need to “grant access” for our TFS 2010 server to create sites. Click the “Grant access” link and fill out the full URL to the TFS server, for example http://servername.domain.com:8080/tfs, and if need be restrict the path that TFS sites can be created on. Remember that when the users create a new team project they can change the default and point it anywhere they like as long as it is an authorised SharePoint location. Figure: Grant access for your TFS 2010 server to create sites in SharePoint 2010 Now that we have an authorised location for our team project portals to be created we need to tell our Team Project Collection that this is where it should stick sites by default for any new Team Projects created. Configure the Team Foundation Server 2010 Team Project Collection to create new sites in SharePoint 2010 Back on out TFS 2010 server we need to setup the defaults for our upgraded Team Project Collection to the new SharePoint 2010 integration we have just set up. On the TFS 2010 server open up the “Team Foundation Server Administration Console” again and navigate to the “Team Project Collections” node. Once you are there you will see a list of all of your TPC’s and in our case we have a DefaultCollection as well as out named and Upgraded collection for TFS 2008. If you select the “SharePoint Site” tab we can see that it is not currently configured. Figure: Our new Upgrade TFS2008 Team Project Collection does not have SharePoint configured Select to “Edit Default Site Location” and select the new integration point that we just set up for SharePoint 2010. Once you have selected the “SharePoint Web Application” (the thing we just configured) then it will give you an example based on that configuration point and the name of the Team Project Collection that we are configuring. Figure: Set the default location for new Team Project Portals to be created for this Team Project Collection This is where the reason for configuring the Extensions on the SharePoint 2010 server before doing this last bit becomes apparent. TFS 2010 is going to create a site at our http://sharepointserver/tfs02/ location called http://sharepointserver/tfs02/[TeamProjectCollection], or whatever we had specified, and it would have had difficulty doing this if we had not given it permission first. Figure: If there is no Team Project Collection site at this location the TFS 2010 server is going to create one This will create a nice Team Project Collection parent site to contain the Portals for any new Team Projects that are created. It is with noting that it will not create portals for existing Team Projects as this process is run during the Team Project Creation wizard. Figure: Just a basic parent site to host all of your new Team Project Portals as sub sites You will need to add all of the users that will be creating Team Projects to be Administrators of this site so that they will not get an error during the Project Creation Wizard. You may also want to customise this as a proper portal to your projects if you are going to be having lots of them, but it is really just a default placeholder so you have a top level site that you can backup and point at. You have now integrated SharePoint 2010 and team Foundation Server 2010! You can now go forth and multiple your Team Projects for this Team Project Collection or you can continue to add portals to your other Collections. Technorati Tags: TFS 2010,Sharepoint 2010,VS ALM

Read the article

Installing Lubuntu 14.04.1 forcepae fails

- by Rantanplan

I tried to install Lubuntu 14.04.1 from a CD. First, I chose Try Lubuntu without installing which gave: ERROR: PAE is disabled on this Pentium M (PAE can potentially be enabled with kernel parameter "forcepae" ... Following the description on https://help.ubuntu.com/community/PAE, I used forcepae and tried Try Lubuntu without installing again. That worked fine. dmesg | grep -i pae showed: [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- forcepae [ 0.008118] PAE forced! On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Finally, I rebooted once more and tried Check disc for defects with forcepae option; no errors have been found. Now, I am wondering how to find the error or whether it would be better to follow advice c in https://help.ubuntu.com/community/PAE: "Move the hard disk to a computer on which the processor has PAE capability and PAE flag (that is, almost everything else than a Banias). Install the system as usual but don't add restricted drivers. After the install move the disk back." Thanks for some hints! Perhaps some of the following can help: On Lubuntu 12.04: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1284.76 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise cpuid eax in eax ebx ecx edx 00000000 00000002 756e6547 6c65746e 49656e69 00000001 000006d6 00000816 00000180 afe9f9bf 00000002 02b3b001 000000f0 00000000 2c04307d 80000000 80000004 00000000 00000000 00000000 80000001 00000000 00000000 00000000 00000000 80000002 20202020 20202020 65746e49 2952286c 80000003 6e655020 6d756974 20295228 7270204d 80000004 7365636f 20726f73 30352e31 007a4847 Vendor ID: "GenuineIntel"; CPUID level 2 Intel-specific functions: Version 000006d6: Type 0 - Original OEM Family 6 - Pentium Pro Model 13 - Stepping 6 Reserved 0 Brand index: 22 [not in table] Extended brand string: " Intel(R) Pentium(R) M processor 1.50GHz" CLFLUSH instruction cache line size: 8 Feature flags afe9f9bf: FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers MCE Machine Check Exception CX8 COMPXCHG8B Instruction SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop TM Thermal monitor 31 reserved TLB and cache info: b0: unknown TLB/cache descriptor b3: unknown TLB/cache descriptor 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries f0: unknown TLB/cache descriptor 7d: unknown TLB/cache descriptor 30: unknown TLB/cache descriptor 04: Data TLB: 4MB pages, 4-way set assoc, 8 entries 2c: unknown TLB/cache descriptor On Lubuntu 14.04.1 live-CD with forcepae: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1284.68 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management: uname -a Linux lubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty cpuid CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6) model = 0xd (13) stepping id = 0x6 (6) extended family = 0x0 (0) extended model = 0x0 (0) (simple synth) = Intel Pentium M (Dothan B1) / Celeron M (Dothan B1), 90nm miscellaneous (1/ebx): process local APIC physical ID = 0x0 (0) cpu count = 0x0 (0) CLFLUSH line size = 0x8 (8) brand index = 0x16 (22) brand id = 0x16 (22): Intel Pentium M, .13um feature information (1/edx): x87 FPU on chip = true virtual-8086 mode enhancement = true debugging extensions = true page size extensions = true time stamp counter = true RDMSR and WRMSR support = true physical address extensions = false machine check exception = true CMPXCHG8B inst. = true APIC on chip = false SYSENTER and SYSEXIT = true memory type range registers = true PTE global bit = true machine check architecture = true conditional move/compare instruction = true page attribute table = true page size extension = false processor serial number = false CLFLUSH instruction = true debug store = true thermal monitor and clock ctrl = true MMX Technology = true FXSAVE/FXRSTOR = true SSE extensions = true SSE2 extensions = true self snoop = true hyper-threading / multi-core supported = false therm. monitor = true IA64 = false pending break event = true feature information (1/ecx): PNI/SSE3: Prescott New Instructions = false PCLMULDQ instruction = false 64-bit debug store = false MONITOR/MWAIT = false CPL-qualified debug store = false VMX: virtual machine extensions = false SMX: safer mode extensions = false Enhanced Intel SpeedStep Technology = true thermal monitor 2 = true SSSE3 extensions = false context ID: adaptive or shared L1 data = false FMA instruction = false CMPXCHG16B instruction = false xTPR disable = false perfmon and debug = false process context identifiers = false direct cache access = false SSE4.1 extensions = false SSE4.2 extensions = false extended xAPIC support = false MOVBE instruction = false POPCNT instruction = false time stamp counter deadline = false AES instruction = false XSAVE/XSTOR states = false OS-enabled XSAVE/XSTOR = false AVX: advanced vector extensions = false F16C half-precision convert instruction = false RDRAND instruction = false hypervisor guest status = false cache and TLB information (2): 0xb0: instruction TLB: 4K, 4-way, 128 entries 0xb3: data TLB: 4K, 4-way, 128 entries 0x02: instruction TLB: 4M pages, 4-way, 2 entries 0xf0: 64 byte prefetching 0x7d: L2 cache: 2M, 8-way, sectored, 64 byte lines 0x30: L1 cache: 32K, 8-way, 64 byte lines 0x04: data TLB: 4M pages, 4-way, 8 entries 0x2c: L1 data cache: 32K, 8-way, 64 byte lines extended feature flags (0x80000001/edx): SYSCALL and SYSRET instructions = false execution disable = false 1-GB large page support = false RDTSCP = false 64-bit extensions technology available = false Intel feature flags (0x80000001/ecx): LAHF/SAHF supported in 64-bit mode = false LZCNT advanced bit manipulation = false 3DNow! PREFETCH/PREFETCHW instructions = false brand = " Intel(R) Pentium(R) M processor 1.50GHz" (multi-processing synth): none (multi-processing method): Intel leaf 1 (synth) = Intel Pentium M (Dothan B1), 90nm

Read the article

CodePlex Daily Summary for Thursday, March 01, 2012

CodePlex Daily Summary for Thursday, March 01, 2012Popular ReleasesMetodología General Ajustada - MGA: 01.09.08: Cambios John: Cambios en el MDI: Habilitación del menú e ícono de Imprimir. Deshabilitación de menú Ayuda y opciones de Importar y Exportar del menú Proyectos temporalmente. Integración con código de Crystal Report. Validaciones con Try-Catch al generar los reportes, personalización de los formularios en estilos y botones y validación de selección de tipo de reporte. Creación de instalador con TODOS los cambios y la creación de las carpetas asociadas a los RPT.WatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.14.01: Whats NewAdded New Plugin "Ventrian News Articles Link Selector" to select an Article Link from the News Article Module (This Plugin is not visible by default in your Toolbar, you need to manually add the 'newsarticleslinks' to your toolbarset) http://www.watchersnet.de/Portals/0/screenshots/dnn/CKEditorNewsArticlesLinks.png File-Browser: Added Paging to the Files List. You can define the Page Size in the Options (Default Value: 20) http://www.watchersnet.de/Portals/0/screenshots/dnn/CKEdito...MyRouter (Virtual WiFi Router): MyRouter 1.0 (Beta): A friendlier User Interface. A logger file to catch exceptions so you may send it to use to improve and fix any bugs that may occur. A feedback form because we always love hearing what you guy's think of MyRouter. Check for update menu item for you to stay up to date will the latest changes. Facebook fan page so you may spread the word and share MyRouter with friends and family And Many other exciting features were sure your going to love!WPF Sound Visualization Library: WPF SVL 0.3 (Source, Binaries, Examples, Help): Version 0.3 of WPFSVL. This includes three new controls: an equalizer, a digital clock, and a time editor.Thai Flood Watch: Thai Flood Watch - Source: non commercial use only ** This project supported by Department of Computer Science KhonKaen University Thailand.ZXing.Net: ZXing.Net 0.4.0.0: sync with rev. 2196 of the java version important fix for RGBLuminanceSource generating barcode bitmaps Windows Phone demo client (only tested with emulator, because I don't have a Windows Phone) Barcode generation support for Windows Forms demo client Webcam support for Windows Forms demo clientOrchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-Notes.NET Assembly Information: Assembly Information 2.1.0.1: - Fixed the issue in which AnyCPU binaries were shown as 32bit - Added support to show the errors in-case if some dlls failed to load.FluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 1.2: New features: - QueryValues method - Added support for automapping to enumerations (both int and string are supported). Fixed 2 reported issues.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.15: 3.6.0.15 28-Feb-2012 • Fix: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Work Item 10435: http://netsqlazman.codeplex.com/workitem/10435 • Fix: Made StorageCache thread safe. Thanks to tangrl. • Fix: Members property of SqlAzManApplicationGroup is not functioning. Thanks to tangrl. Work Item 10267: http://netsqlazman.codeplex.com/workitem/10267 • Fix: Indexer are making database calls. Thanks to t...SCCM Client Actions Tool: Client Actions Tool v1.1: SCCM Client Actions Tool v1.1 is the latest version. It comes with following changes since last version: Added stop button to stop the ongoing process. Added action "Query update status". Added option "saveOnlineComputers" in config.ini to enable saving list of online computers from last session. Default value for "LatestClientVersion" set to SP2 R3 (4.00.6487.2157). Wuauserv service manual startup mode is considered healthy on Windows 7. Errors are now suppressed in checkReleases...Kinect PowerPoint Control: Kinect PowerPoint Control v1.1: Updated for Kinect SDK 1.0.SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8: API Updates: SOLID Extract Method for Archives (7Zip and RAR). ExtractAllEntries method on Archive classes will extract archives as a streaming file. This can offer better 7Zip extraction performance if any of the entries are solid. The IsSolid method on 7Zip archives will return true if any are solid. Removed IExtractionListener was removed in favor of events. Unit tests show example. Bug fixes: PPMd passes tests plus other fixes (Thanks Pavel) Zip used to always write a Post Descri...Social Network Importer for NodeXL: SocialNetImporter(v.1.3): This new version includes: - Download new networks for Facebook fan pages. - New options for downloading more posts - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuASP.NET REST Services Framework: Release 1.1 - Standard version: Beginning from v1.1 the REST-services Framework is compatible with ASP.NET Routing model as well with CRUD (Create, Read, Update, and Delete) principle. These two are often important when building REST API functionality within your application. It also includes ability to apply Filters to a class to target all WebRest methods, as well as some performance enhancements. New version includes Metadata Explorer providing ability exploring the existing services that becomes essential as the number ...SQL Live Monitor: SQL Live Monitor 1.31: A quick fix to make it this version work with SQL 2012. Version 2 already has 2012 working, but am still developing the UI in version 2, so this is just an interim fix to allow user to monitor SQL 2012.Content Slider Module for DotNetNuke: 01.02.00: This release has the following updates and new features: Feature: One-Click Enabling of Pager Setting Feature: Cache Sliders for Performance Feature: Configurable Cache Setting Enhancement: Transitions can be Selected Bug: Secure Folder Images not Viewable Bug: Sliders Disappear on Postback Bug: Remote Images Cause Error Bug: Deleted Images Cause Error System Requirements DotNetNuke v06.00.00 or newer .Net Framework v3.5 SP1 or newer SQL Server 2005 or newerImage Resizer for Windows: Image Resizer 3 Preview 3: Here is yet another iteration toward what will eventually become Image Resizer 3. This release is stable. However, I'm calling it a preview since there are still many features I'd still like to add before calling it complete. Updated on February 28 to fix an issue with installing on multi-user machines. As usual, here is my progress report. Done Preview 3 Fix: 3206 3076 3077 5688 Fix: 7420 Fix: 7527 Fix: 7576 7612 Preview 2 6308 6309 Fix: 7339 Fix: 7357 Preview 1 UI...Finestra Virtual Desktops: 2.5.4500: This is a bug fix release for version 2.5. It fixes several things and adds a couple of minor features. See the 2.5 release notes for more information on the major new features in that version. Important - If Finestra crashes on startup for you, you must install the Visual C++ 2010 runtime from http://www.microsoft.com/download/en/details.aspx?id=5555. Fixes a bug with window animations not refreshing the screen on XP and with DWM off Fixes a bug with with crashing on XP due to a bug in t...Media Companion: MC 3.432b Release: General Now remembers window location. Catching a few more exceptions when an image is blank TV A couple of UI tweaks Movies Fixed the actor name displaying HTML Fixed crash when using Save files as "movie.nfo", "movie.tbn", & "fanart.jpg" New CSV template for HTML output function Added <createdate> tag for HTML output A couple of UI tweaks Known Issues Multiepisodes are not handled correctly in MC. The created nfo is valid, but they are not displayed in MC correctly & saving the...New Projectsabac: abac cn websiteAION Launcher: simple aion launcher...just edit the background image of your choosing inside the code and other things such as the links for the buttons and the ip adress and port of the serverAXTFSTool: Dynamics AX tool that connects to your project's TFS and lists the objects your colleagues have changed. Written in C#, still under development and improvements. Useful for team leaders, deployment managers, etc.cookieTopo: Topo map viewerCrmFetchKit.js: Simple Library at allows the execution of fetchxml queries via JavaScript for Dynamics CRM 2011 (using the new WCF endpoints). Like the CrmRestKit this framework uses the promise/A capacities of jQuery. The code and the idea for this framework bases on the CrmServiceToolkit (http://crmtoolkit.codeplex.com/) developed by Daniel Cai. cy univerX engine: ????????DNSAPI.NET: A common API for managing DNS servers on Windows. This project is based on the work I started back in 2002 when I needed to create a web front-end for Windows' DNS server using the .Net framework. The plan is to expand on the project and include support for the BIND server on Windows too. ego.net: ego.netfdTFS: Team Foundation Server Source Control Plugin for FlashDevelopGeoWPS: GeoWPS is an implementation of the OGC WPS. It will be developed in C#. IThink: A new project.King Garden: Boy King's .net practical projects.King Garret: Boy King's .net learning projects.LottoCheck: Follow LottoNot-Terraria: This is a like terraria game but NOT terrariaPassword Protector: Password Protector SharePoint 2010 BlobCache Manager: Manage your web application's blobcache settings directly in the central administration.SharePoint 2010 SilverLight Multiple File Uploader: SharePoint 2010 SilverLight Multiple File Uploader for Documents Libraries with MetaData.Sharepoint Tool Collection: I want to Integrate Various Utilities of Sharepoint at one place. It is for easy working of user or developer. Ex-1. A utility which takes some params & csv file and upload 100s of items on the sharepoint list easily. Ex-2 A utility to upload documents in a library. etc.SQLCLR Cmd Exec Framework Example: For users of MS SQL Server, xp_cmdshell is a utility that we usually want to have disabled. However there are still cases where calling a command line is needed. This project provides an framework/example to make command line calls. It is not meant as an xp_cmdshell replacement but as a workaround.Symmetric Designs Python 3.2: Symmetric Designs for Python 3.2 helps graphical artists to design and develop their own designs freestyle. It uses the pygame module for Python 3.2. It can also be analysed in order to get a grasp of graphics programming in Python.Terminsoft open CLR libraries: Terminsoft open CLR libraries. The first is Terminsoft.Intervals, intended for modeling the sets of intervals with elements, the comparison operation is defined for. The second is Terminsoft.Syntax, intended for text parsing and transformation and built upon regular expressions.Thai Flood Watch: Thai Flood Watch provides useful information, up-to-date and visual access to the major canal in Bangkok, Thailand using data from department of drainage and sewerage. Easily monitor river and canal flow information in Bangkok area, right from your hand.TheNerd: Sample video game source code. Using Sunburn.Unity.WebAPI: A library that allows simple Integration of Microsoft's Unity IoC container with ASP.NET's WebAPI. This project includes a bespoke DependencyResolver that creates a child container per HTTP request and disposes of all registered IDisposable instances at the end of the request.Wholemy.RemoteTouch: The project is a remote touch-sensitive keyboard with a customizable interface which allows to supplement control of another computer, regardless of the wires. For example, if you have not so fast Tablet PC - a client and a fast desktop computer - the server using the network.WindowPlace: WindowPlace makes it possible to save Window positions and sizes to a profile. Switching between profiles will effortlessly move and resize your windows. Help improve productivity - especially for multi-monitor systems. Developed in C# using WPF and a few Windows API calls in the background. WP Error Manager (Devv.Core.WPErrorManager): Library to log, handle and report errors on Windows Phone 7 apps. Fully customizable and extremely easy to implement. Works with any WP7 app. Tested with the emulator, Nokia Lumia 800 and Samsung Focus Flash.WPMatic: Windows Phone7 App to manage Homematic (eQ-3) Devices. The App is like the Homematic Central Configuration Unit (CCU) in German.www.Nabaza.com Freeware and Ebooks: www.Nabaza.com Freeware and Ebooks by William R. NabazaZap: Zap is a light weight .NET communication framework. It is designed for programs running in local area network. Zap provides code generation tool that enables user to call remote methods, add/remote event listener to remote objects, while hides the lower details.

Read the article

Top Tweets SOA Partner Community – March 2012

- by JuergenKress

Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity SOA Community ?SOA Community Newsletter February 2012 wp.me/p10C8u-o0 Marc ?Reading through the #OFM 11.1.1.6 , patchset 5 documentation. What is the best way to upgrade your whole dev…prd street. SOA Community Thanks for the successful and super interesting #sbidays ! Wonderful discussions around the Integration, case management and security tracks Torsten Winterberg Schon den neuen Opitz Technology-Blog gebookmarked? The Cattle Crew bit.ly/yLPwBD wird ab sofort regelmäßig Erkenntnisse posten. OTNArchBeat ? Unit Testing Asynchronous BPEL Processes Using soapUI | @DanielAmadei bit.ly/x9NsS9 Rolando Carrasco ?Video de Human Task en BPM 11g. Por @edwardo040. bit.ly/wki9CA cc @OracleBPM @OracleSOA @soacommunity View video Marcel Mertin SOA Security Hands-On by Dirk Krafzig and Mamoon Yunus at #sbidays is also great! SOA Community Workshop day #sbidays #BPMN2.0 by Volker Stiehl from #SAP great training – now I can model & execute in #bpmsuite #soacommunity Simone Geib ?Just updated our advanced #soasuite #otn page with a number of very interesting @orclateamsoa blog posts: bit.ly/advancedsoasui… OTNArchBeat ? Start Small, Grow Fast: SOA Best Practices article by @biemond, @rluttikhuizen, @demed bit.ly/yem9Zv Steffen Miller ? Nice new features in SOA Suite Business Rules #PS5 Testing rules with scenarios and output validation bit.ly/zj64Q3 @SOACOMMUNITY OTNArchBeat ? Reply SOA Blackbelt training by David Shaffer, April 30th–May 4th 2012 bit.ly/xGdC24 OTNArchBeat ? What have BPM, big data, social tools, and business models got in common? | Andy Mulholland bit.ly/xUkOGf SOA Community ? Live hacking at #sbidays – cheaper shopping, bias cracking, payment systems, secure your SOA! pic.twitter.com/y7YaIdug SOA Community Future #BPM & #ACM solutions can make use of ontology’s, based on #sqarql #sbidays pic.twitter.com/xLb1Z5zs Simone Geib ? @soacommunity: SOA Blackbelt training by David Shaffer, April 30th–May 4th 2012 wp.me/p10C8u-nX Biemond Changing your ADF Connections in Enterprise Manager with PS5: With Patch Set 5 of Fusion Middleware you can fina… bit.ly/zF7Rb1 Marc ? HUGE (!) CPU and Heap improvement on Oracle Fusion Middleware tinyurl.com/762drzp @wlscommunity @soacommunity #OSB #SOA #WLS SOA Community ?Networking @ SOA & BPM Partner Community blogs.oracle.com/soacommunity/e… #soacommunity #otn #opn #oracle SOA Community ?Published the SOA Partner Community newsletter February edition – READ it. Not yet a member? oracle.com/goto/emea/soa #soacommunity #otn #opn AMIS, Oracle & Java Blog by Lucas Jellema: "Book Review: Do More with SOA Integration: Best of Packt (december 2011, various authors)" bit.ly/wq633E Jon petter hjulstad @SOASimone Excellent summary! Lots of new features! Simone Geib ?Do you want to know what’s new in #soasuite #PS5? Go to bit.ly/xBX06f and let me know what you think SOA Community ? Unit Testing Asynchronous BPEL Processes Using soapUI oracle.com/technetwork/ar… #soacommunity #soa #otn #oracle #bpel Retweeted by SOA Community View media Retweeted by SOA Community Eric Elzinga ? Oracle Fusion Middleware Partner Community Forum Malage, The Overview, bit.ly/AA9BKd #ofmforum SOA&Cloud Symposium ? The February issue of the Service Technology Magazine is now published. servicetechmag.com SOA Community ? Oracle SOA Suite 11g Database Growth Management – must read! oracle.com/technetwork/da… #soacommunity #soa #purging demed ? Have you exposed internal processes to mobile devices using #oraclesoa? Interested in an article? DM me! #osb #rest #multichannel #mobile orclateamsoa ? A-Team SOA Blog: Enhanced version of Thread Dump Analyzer (TDA A-Team) ow.ly/1hpk7l SOA Community Reply BPM Suite #PS5 (11.1.1.6) available for download soacommunity.wordpress.com/2012/02/22/soa… Send us your feedback! #soacommunity #bpmsuite #opn SOA Community ? SOA Suite #PS5 (11.1.1.6) available for download soacommunity.wordpress.com/2012/02/22/soa… Send us your feedback! #soacommunity #soasuite SOA Community BPM Suite #PS5 1(1.1.1.6) available for download. List of new BPM features blogs.oracle.com/soacommunity/e… #soacommunity #bpm #bpmsuite #opn OracleBlogs BPM in Utilties Industry ow.ly/1hC3fp Retweeted by SOA Community OTNArchBeat ? Demystifying Oracle Enterprise Gateway | Naresh Persaud bit.ly/xtDNe2 OTNArchBeat ? Architect’s Guide to Big Data; Test BPEL Processes Using SoapUI; Development Debate bit.ly/xbDYSo Frank Nimphius ? Finished my book review of "Do More with SOA Integration: Best of Packt ". Here are my review comments: bit.ly/x2k9OZ Lucas Jellema ? That is my one stop-and-go download center for #PS5 : edelivery.oracle.com/EPD/Download/g… Lucas Jellema ? Interesting piece of documentation: Fusion Applications Extensibility Guide – docs.oracle.com/cd/E15586_01/f… source for design time @ run time inspira Lucas Jellema ? Strongly improved support for testing Business Rules at Design Time in #PS5 see docs.oracle.com/cd/E23943_01/u… Lucas Jellema ? SOA Suite 11gR1 PS5: new BPEL Component testing – docs.oracle.com/cd/E23943_01/d… Lucas Jellema ? PS5 available for CEP (Complex Event Processing) – a personal favorite of mine : oracle.com/technetwork/mi… Lucas Jellema ?What’s New in Fusion Developer’s Guide 11gR1 PS5: docs.oracle.com/cd/E23943_01/w… Lucas Jellema ? BPMN Correlation (FMW 11gR1 PS5): docs.oracle.com/cd/E23943_01/d… Lucas Jellema ? Modifying running BPM Process instances (FMW 11gR1 PS5): docs.oracle.com/cd/E23943_01/d… Lucas Jellema ? SOA Suite 11gR1 PS5 – new aggregation pattern: docs.oracle.com/cd/E23943_01/d… routing multiple messages to same instance Melvin van der Kuijl ? Automating Testing of SOA Composite Applications in PS5. docs.oracle.com/cd/E23943_01/d… Cato Aune ? SOA suite PS5 Enterprise Deployment Guide is available in ePub docs.oracle.com/cd/E23943_01/c… . Much better than pdf on Galaxy Note SOA Community ?JDeveloper 11.1.1.6 is available for download bit.ly/wGYrwE #soacommunity SOA Community ? Your first experience #PS5 – let us know @soacommunity – send us your tweets and blog posts! #soacommunity Jon petter hjulstad ? WLS 10.3.6 New features, ex better logging of jdbc use: docs.oracle.com/cd/E23943_01/w… Heidi Buelow ? Get it now! RT @soacommunity: BPM Suite PS5 11.1.1.6 available for download bit.ly/AgagT5 #bpm #soacommunity Jon petter hjulstad ?SOA Suite PS5 EDG contains OSB! docs.oracle.com/cd/E23943_01/c… Jon petter hjulstad ? Testing Oracle Rules from JDeveloper is easier in PS5: docs.oracle.com/cd/E23943_01/u… Biemond® ? What’s New in Oracle Service Bus 11.1.1.6.0 oracle.com/technetwork/mi… Jon petter hjulstad ? Adminguide New and Changed Features for PS5, ex GridLink data sources: docs.oracle.com/cd/E23943_01/c… Retweeted by SOA Community Andreas Koop ? Unbelievable! #OFM Doc Lib growth from 11gPS4->11gPS5 by 1.2G! View media SOA Community ?ODI PS5 is available oracle.com/technetwork/mi… #odi #soacommunity 22 Feb View media SOA Community Service Bus 11g Development Cookbook soacommunity.wordpress.com/2012/02/20/ser… #osb #soacommunity #ace #opn View media For regular information on Oracle SOA Suite become a member in the SOA Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Technorati Tags: soacommunity,twitter,Oracle,SOA Community,Jürgen Kress,OPN,SOA,BPM

Search Results

Search found 29064 results on 1163 pages for 'network management'.

Page 691/1163 | < Previous Page | 687 688 689 690 691 692 693 694 695 696 697 698 | Next Page >

- by Guy Fawkes

- by speakjava

- by marc dekeyser

- by Phil Factor

- by dazzle

- by mgeorge

- by M.A.X

- by Mike Stiles

- by smullan

- by vermiculus

- by Neuquino

- by Carlos Paulino

- by Bastien

- by ewwhite

- by Ailbe

- by Eddie

- by Blubber

- by kce

- by x0a

- by Boris_yo

- by weka

- by Martin Hinshelwood

- by Rantanplan

- by JuergenKress

< Previous Page | 687 688 689 690 691 692 693 694 695 696 697 698 | Next Page >