Search Results

Search found 18366 results on 735 pages for 'microsoft hup'.

Page 692/735 | < Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699  | Next Page >

• How To Configure Remote Desktop To Hyper-V Guest Virtual Machines

  - by Brian Jackett

  Configuring Remote Desktop (RDP) from a host Hyper-V machine to a guest virtual machine can be tricky, so this post is dedicated to the issues and resolution steps I went through to allow RDP.  Cutting to the point, below are the things to look for followed by some explanation about my scenario if you care to read.  This is not an exhaustive list of what is required, just the items that were causing problems for my particular scenario. Requirements Allow Remote Desktop Connections in guest OS. The network adapter type must allow communication with host machine (e.g. use an “Internal” virtual adapter.) If running Server 2008 R2 on guest, network discovery mode must be turned on. If running Server 2008 R2 on guest, the services supporting network discovery mode must be running: - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host My Environment     A quick word about my environment.  I am running Windows Server 2008 R2 with Hyper V on my laptop and numerous guest VMs running Windows Server 2003 R2 or Windows Server 2008 R2.  I run a domain controller VM and then 1 or 2 SharePoint servers depending on my work needs.  I’ve found this setup to work well except when it comes to the display window for my VMs. The Issue     Ever since I began running Hyper-V I haven’t been able to RDP to my guest VMs which means the resolution for my connection windows ha been limited to what the native Hyper-V connections allow.  During personal use I can put the resolution up to 1152 x 864, but during presentations I am usually limited to a measly 800 x 600.  That is until today when I decided to fully investigate why I couldn’t connect via RDP.     First a thank you to John Ross (@johnrossjr), Christina Wheeler (@cwheeler76) and Clayton Cobb (@warrtalon) for various suggestions while I was researching tonight.  As it turns out I had not 1, not 2, but 3 items preventing me from using RDP.  Let’s dig into the requirements above. Allow RDP Connection     This item I had previously taken care of, but it bears repeating because by default Windows Server 2008 R2 does not allow RDP connections.  Change the setting from “Don’t allow…” to whichever “Allow connections…” setting suits your needs.  I chose the less secure option as this is just my dev laptop. Network Adapter Type     When I originally configured my VMs I configured each to use 2 network adapters: one using the physical ethernet adapter for internet use and a virtual private adapter for communication between the VMs.  The connection for the ethernet adapter is an "”External” adapter and thus doesn’t connect between the host and guest.  The virtual private adapter allowed communication ONLY between the VMs and not to my host.  There is a third option “Internal” which allows communication between VMs as well as to the host.  After finding out this distinction I promptly created an Internal network adapter and assigned that to my VMs. Turn On Network Discovery     Seems like a pretty common sense thing, but in order to allow remote desktop connections the target computer must able to be found by the source computer (explained here.)  One of the settings that controls if a computer can be found on the network is aptly named Network Discovery.  By default Windows Server 2008 R2 turns Network Discovery off for security purposes.  To enable it open up the Network and Sharing Center.  Click “Change Advanced Sharing Settings” on the left.  On the following screen select “Turn on network discovery” for the currently used profile and click Save Settings.  You may notice though that your selection to turn on network discovery doesn’t save.  If this is the case then you most likely don’t have the supporting services running (as was my case.) Network Discovery Supporting Services     There are a total of 4 services (listed again below) that need to be running before you can turn on network discovery (explained here.)  The below images highlight these services.  In my guest VM I found that I had DNS Client already running while the other 3 were disabled.  I set them all to enabled and started the ones that were stopped.  After this change I returned to the Sharing settings screen and found that Network Discovery was turned on.  I’m not sure whether this was picking up my attempt to turn it on previously or if starting those services turned it on.  Either way the end result was a success. - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host Before and After Results     The first image is the smaller square shaped viewing window used by the Hyper-V native connection.  The second is the full-screen RDP connection in all its widescreen glory. Conclusion     Over the past few months I’ve found Hyper-V to be very useful for virtualizing my development environments, but I’ve also had a steep learning curve to get various items configured just right.  Allowing RDP connections to guest VMs was one area that I hadn’t been able to get right for the longest time.  Now that I resolved these issues I hope that others can avoid the pitfalls that I ran into.  If you know of any other items I left off feel free to let me know.        -Frog Out   Links Turning on Network Discovery http://sqlblog.com/blogs/john_paul_cook/archive/2009/08/15/remote-desktop-connection-on-windows-server-2008-r2.aspx Services required for Network Discovery http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2e1fea01-3f2b-4c46-a631-a8db34ed4f84

  Read the article

• C# HashSet<T>

  - by Ben Griswold

  I hadn’t done much (read: anything) with the C# generic HashSet until I recently needed to produce a distinct collection.  As it turns out, HashSet<T> was the perfect tool. As the following snippet demonstrates, this collection type offers a lot: // Using HashSet<T>: // http://www.albahari.com/nutshell/ch07.aspx var letters = new HashSet<char>("the quick brown fox");   Console.WriteLine(letters.Contains('t')); // true Console.WriteLine(letters.Contains('j')); // false   foreach (char c in letters) Console.Write(c); // the quickbrownfx Console.WriteLine();   letters = new HashSet<char>("the quick brown fox"); letters.IntersectWith("aeiou"); foreach (char c in letters) Console.Write(c); // euio Console.WriteLine();   letters = new HashSet<char>("the quick brown fox"); letters.ExceptWith("aeiou"); foreach (char c in letters) Console.Write(c); // th qckbrwnfx Console.WriteLine();   letters = new HashSet<char>("the quick brown fox"); letters.SymmetricExceptWith("the lazy brown fox"); foreach (char c in letters) Console.Write(c); // quicklazy Console.WriteLine(); The MSDN documentation is a bit light on HashSet<T> documentation but if you search hard enough you can find some interesting information and benchmarks. But back to that distinct list I needed… // MSDN Add // http://msdn.microsoft.com/en-us/library/bb353005.aspx var employeeA = new Employee {Id = 1, Name = "Employee A"}; var employeeB = new Employee {Id = 2, Name = "Employee B"}; var employeeC = new Employee {Id = 3, Name = "Employee C"}; var employeeD = new Employee {Id = 4, Name = "Employee D"};   var naughty = new List<Employee> {employeeA}; var nice = new List<Employee> {employeeB, employeeC};   var employees = new HashSet<Employee>(); naughty.ForEach(x => employees.Add(x)); nice.ForEach(x => employees.Add(x));   foreach (Employee e in employees) Console.WriteLine(e); // Returns Employee A Employee B Employee C The Add Method returns true on success and, you guessed it, false if the item couldn’t be added to the collection.  I’m using the Linq ForEach syntax to add all valid items to the employees HashSet.  It works really great.  This is just a rough sample, but you may have noticed I’m using Employee, a reference type.  Most samples demonstrate the power of the HashSet with a collection of integers which is kind of cheating.  With value types you don’t have to worry about defining your own equality members.  With reference types, you do. internal class Employee {     public int Id { get; set; }     public string Name { get; set; }       public override string ToString()     {         return Name;     }          public bool Equals(Employee other)     {         if (ReferenceEquals(null, other)) return false;         if (ReferenceEquals(this, other)) return true;         return other.Id == Id;     }       public override bool Equals(object obj)     {         if (ReferenceEquals(null, obj)) return false;         if (ReferenceEquals(this, obj)) return true;         if (obj.GetType() != typeof (Employee)) return false;         return Equals((Employee) obj);     }       public override int GetHashCode()     {         return Id;     }       public static bool operator ==(Employee left, Employee right)     {         return Equals(left, right);     }       public static bool operator !=(Employee left, Employee right)     {         return !Equals(left, right);     } } Fortunately, with Resharper, it’s a snap. Click on the class name, ALT+INS and then follow with the handy dialogues. That’s it. Try out the HashSet<T>. It’s good stuff.

  Read the article

• Our Look at the Internet Explorer 9 Platform Preview

  - by Asian Angel

  Have you been hearing all about Microsoft’s work on Internet Explorer 9 and are curious about it? If you are wanting a taste of the upcoming release then join us as we take a look at the Internet Explorer 9 Platform Preview. Note: Windows Vista and Server 2008 users may need to install a Platform Update (see link at bottom for more information). Getting Started If you are curious about the systems that the platform preview will operate on here is an excerpt from the FAQ page (link provided below). There are two important points of interest here: The platform preview does not replace your regular Internet Explorer installation The platform preview (and the final version of Internet Explorer 9) will not work on Windows XP There really is not a lot to the install process…basically all that you will have to deal with is the “EULA Window” and the “Install Finished Window”. Note: The platform preview will install to a “Program Files Folder” named “Internet Explorer Platform Preview”. Internet Explorer 9 Platform Preview in Action When you start the platform preview up for the first time you will be presented with the Internet Explorer 9 Test Drive homepage. Do not be surprised that there is not a lot to the UI at this time…but you can get a good idea of how Internet Explorer will act. Note: You will not be able to alter the “Homepage” for the platform preview. Of the four menus available there are two that will be of interest to most people…the “Page & Debug Menus”. If you go to navigate to a new webpage you will need to go through the “Page Menu” unless you have installed the Address Bar Mini-Tool (shown below). Want to see what a webpage will look like in an older version of Internet Explorer? Then choose your version in the “Debug Menu”. We did find it humorous that IE6 was excluded from the choices offered. Here is what the URL entry window looks like if you are using the “Page Menu” to navigate between websites. Here is the main page of the site here displayed in “IE9 Mode”…looking good. Here is the main page viewed in “Forced IE5 Document Mode”. There were some minor differences (colors, sidebar, etc.) in how the main page displayed in comparison to “IE9 Mode”. Being able to switch between modes makes for an interesting experience… As you can see there is not much to the “Context Menu” at the moment. Notice the slightly altered icon for the platform preview… “Add” an Address Bar of Sorts If you would like to use a “make-shift” Address Bar with the platform preview you can set up the portable file (IE9browser.exe) for the Internet Explorer 9 Test Platform Addressbar Mini-Tool. Just place it in an appropriate folder, create a shortcut for it, and it will be ready to go. Here is a close look at the left side of the Address Bar Mini-Tool. You can try to access “IE Favorites” but may have sporadic results like those we experienced during our tests. Note: The Address Bar Mini-Tool will not line up perfectly with the platform preview but still makes a nice addition. And a close look at the right side of the Address Bar Mini-Tool. In order to completely shut down the Address Bar Mini-Tool you will need to click on “Close”. Each time that you enter an address into the Address Bar Mini-Tool it will open a new window/instance of the platform preview. Note: During our tests we noticed that clicking on “Home” in the “Page Menu” opened the previously viewed website but once we closed and restarted the platform preview the test drive website was the starting/home page again. Even if the platform preview is not running the Address Bar Mini-Tool can still run as shown here. Note: You will not be able to move the Address Bar Mini-Tool from its’ locked-in position at the top of the screen. Now for some fun. With just the Address Bar Mini-Tool open you can enter an address and cause the platform preview to open. Here is our example from above now open in the platform preview…good to go. Conclusion During our tests we did experience the occasional crash but overall we were pleased with the platform preview’s performance. The platform preview handled rather well and definitely seemed much quicker than Internet Explorer 8 on our test system (a definite bonus!). If you are an early adopter then this could certainly get you in the mood for the upcoming beta releases! Links Download the Internet Explorer 9 Preview Platform Download the Internet Explorer 9 Test Platform Addressbar Mini-Tool Information about Platform Update for Windows Vista & Server 2008 View the Internet Explorer 9 Platform Preview FAQ Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPMake Ctrl+Tab in Internet Explorer 7 Use Most Recent OrderRemove ISP Text or Corporate Branding from Internet Explorer Title BarWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer?Prevent Firefox or Internet Explorer from Printing the URL on Every Page TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses

  Read the article

• LWJGL - Eclipse error [on hold]

  - by Zarkopafilis

  When I try to run my lwjgl project, an error pops . Here is the log file: # A fatal error has been detected by the Java Runtime Environment: # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d8fcc0a, pid=5612, tid=900 # JRE version: 6.0_16-b01 Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode windows-x86 ) Problematic frame: V [jvm.dll+0xfcc0a] # If you would like to submit a bug report, please visit: http://java.sun.com/webapps/bugreport/crash.jsp # --------------- T H R E A D --------------- Current thread (0x016b9000): JavaThread "main" [_thread_in_vm, id=900, stack(0x00160000,0x001b0000)] siginfo: ExceptionCode=0xc0000005, reading address 0x00000000 Registers: EAX=0x00000000, EBX=0x00000000, ECX=0x00000006, EDX=0x00000000 ESP=0x001af4d4, EBP=0x001af524, ESI=0x016b9000, EDI=0x016b9110 EIP=0x6d8fcc0a, EFLAGS=0x00010246 Top of Stack: (sp=0x001af4d4) 0x001af4d4: 6da44bd8 016b9110 00000000 001af668 0x001af4e4: ffffffff 22200000 001af620 76ec39c2 0x001af4f4: 001af524 6d801086 0000000b 001afd34 0x001af504: 016b9000 016dd990 016b9000 00000000 0x001af514: 001af5f4 6d9ee000 6d9ef2f0 ffffffff 0x001af524: 001af58c 10008c85 016b9110 00000000 0x001af534: 00000000 000a0554 00000000 00000024 0x001af544: 00000000 00000000 001af6ac 00000000 Instructions: (pc=0x6d8fcc0a) 0x6d8fcbfa: e8 e8 d0 1d 08 00 8b 45 10 c7 45 d8 0b 00 00 00 0x6d8fcc0a: 8b 00 8b 48 08 0f b7 51 26 8b 40 0c 8b 4c 90 20 Stack: [0x00160000,0x001b0000], sp=0x001af4d4, free space=317k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) V [jvm.dll+0xfcc0a] C [lwjgl.dll+0x8c85] C [USER32.dll+0x18876] C [USER32.dll+0x170f4] C [USER32.dll+0x1119e] C [ntdll.dll+0x460ce] C [USER32.dll+0x10e29] C [USER32.dll+0x10e84] C [lwjgl.dll+0x1cf0] j org.lwjgl.opengl.WindowsDisplay.createWindow(Lorg/lwjgl/opengl/DrawableLWJGL;Lorg/lwjgl/opengl/DisplayMode;Ljava/awt/Canvas;II)V+102 j org.lwjgl.opengl.Display.createWindow()V+71 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;Lorg/lwjgl/opengl/Drawable;Lorg/lwjgl/opengl/ContextAttribs;)V+72 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;)V+12 j org.lwjgl.opengl.Display.create()V+7 j zarkopafilis.koding.io.javafx.Main.main([Ljava/lang/String;)V+16 v ~StubRoutines::call_stub V [jvm.dll+0xecf9c] V [jvm.dll+0x1741e1] V [jvm.dll+0xed01d] V [jvm.dll+0xf5be5] V [jvm.dll+0xfd83d] C [javaw.exe+0x2155] C [javaw.exe+0x833e] C [kernel32.dll+0x51154] C [ntdll.dll+0x5b2b9] C [ntdll.dll+0x5b28c] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j org.lwjgl.opengl.WindowsDisplay.nCreateWindow(IIIIZZJ)J+0 j org.lwjgl.opengl.WindowsDisplay.createWindow(Lorg/lwjgl/opengl/DrawableLWJGL;Lorg/lwjgl/opengl/DisplayMode;Ljava/awt/Canvas;II)V+102 j org.lwjgl.opengl.Display.createWindow()V+71 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;Lorg/lwjgl/opengl/Drawable;Lorg/lwjgl/opengl/ContextAttribs;)V+72 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;)V+12 j org.lwjgl.opengl.Display.create()V+7 j zarkopafilis.koding.io.javafx.Main.main([Ljava/lang/String;)V+16 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( = current thread ) 0x0179a400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4460, stack(0x0b900000,0x0b950000)] 0x01795400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=5264, stack(0x0b8b0000,0x0b900000)] 0x01790c00 JavaThread "Attach Listener" daemon [_thread_blocked, id=6080, stack(0x0b860000,0x0b8b0000)] 0x01786400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1204, stack(0x0b810000,0x0b860000)] 0x01759c00 JavaThread "Finalizer" daemon [_thread_blocked, id=5772, stack(0x0b7c0000,0x0b810000)] 0x01755000 JavaThread "Reference Handler" daemon [_thread_blocked, id=4696, stack(0x01640000,0x01690000)] =0x016b9000 JavaThread "main" [_thread_in_vm, id=900, stack(0x00160000,0x001b0000)] Other Threads: 0x01751c00 VMThread [stack: 0x015f0000,0x01640000] [id=4052] 0x0179c800 WatcherThread [stack: 0x0b950000,0x0b9a0000] [id=3340] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 960K, used 816K [0x037c0000, 0x038c0000, 0x03ca0000) eden space 896K, 91% used [0x037c0000, 0x0388c2c0, 0x038a0000) from space 64K, 0% used [0x038a0000, 0x038a0000, 0x038b0000) to space 64K, 0% used [0x038b0000, 0x038b0000, 0x038c0000) tenured generation total 4096K, used 0K [0x03ca0000, 0x040a0000, 0x077c0000) the space 4096K, 0% used [0x03ca0000, 0x03ca0000, 0x03ca0200, 0x040a0000) compacting perm gen total 12288K, used 2143K [0x077c0000, 0x083c0000, 0x0b7c0000) the space 12288K, 17% used [0x077c0000, 0x079d7e38, 0x079d8000, 0x083c0000) No shared spaces configured. Dynamic libraries: 0x00400000 - 0x00424000 C:\Program Files\Java\jre6\bin\javaw.exe 0x77550000 - 0x7768e000 C:\Windows\SYSTEM32\ntdll.dll 0x75a80000 - 0x75b54000 C:\Windows\system32\kernel32.dll 0x758d0000 - 0x7591b000 C:\Windows\system32\KERNELBASE.dll 0x759e0000 - 0x75a80000 C:\Windows\system32\ADVAPI32.dll 0x76070000 - 0x7611c000 C:\Windows\system32\msvcrt.dll 0x77250000 - 0x77269000 C:\Windows\SYSTEM32\sechost.dll 0x771a0000 - 0x77241000 C:\Windows\system32\RPCRT4.dll 0x76eb0000 - 0x76f79000 C:\Windows\system32\USER32.dll 0x76e60000 - 0x76eae000 C:\Windows\system32\GDI32.dll 0x77770000 - 0x7777a000 C:\Windows\system32\LPK.dll 0x75fd0000 - 0x7606e000 C:\Windows\system32\USP10.dll 0x770b0000 - 0x770cf000 C:\Windows\system32\IMM32.DLL 0x770d0000 - 0x7719c000 C:\Windows\system32\MSCTF.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da8b000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x73a00000 - 0x73a32000 C:\Windows\system32\WINMM.dll 0x75610000 - 0x7565b000 C:\Windows\system32\apphelp.dll 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x776e0000 - 0x776e5000 C:\Windows\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x10000000 - 0x1004c000 C:\Users\theo\Desktop\workspace\JavaFX1\lib\natives\windows\lwjgl.dll 0x5d170000 - 0x5d238000 C:\Windows\system32\OPENGL32.dll 0x6e7b0000 - 0x6e7d2000 C:\Windows\system32\GLU32.dll 0x70620000 - 0x70707000 C:\Windows\system32\DDRAW.dll 0x70610000 - 0x70616000 C:\Windows\system32\DCIMAN32.dll 0x75b60000 - 0x75cfd000 C:\Windows\system32\SETUPAPI.dll 0x759b0000 - 0x759d7000 C:\Windows\system32\CFGMGR32.dll 0x76d70000 - 0x76dff000 C:\Windows\system32\OLEAUT32.dll 0x75db0000 - 0x75f0c000 C:\Windows\system32\ole32.dll 0x758b0000 - 0x758c2000 C:\Windows\system32\DEVOBJ.dll 0x74060000 - 0x74073000 C:\Windows\system32\dwmapi.dll 0x74b60000 - 0x74b69000 C:\Windows\system32\VERSION.dll 0x745f0000 - 0x7478e000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_420fe3fa2b8113bd\COMCTL32.dll 0x75d50000 - 0x75da7000 C:\Windows\system32\SHLWAPI.dll 0x74370000 - 0x743b0000 C:\Windows\system32\uxtheme.dll 0x22200000 - 0x22206000 C:\Program Files\ESET\ESET Smart Security\eplgHooks.dll VM Arguments: jvm_args: -Djava.library.path=C:\Users\theo\Desktop\workspace\JavaFX1\lib\natives\windows -Dfile.encoding=Cp1253 java_command: zarkopafilis.koding.io.javafx.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=C:/Program Files/Java/jre6/bin/client;C:/Program Files/Java/jre6/bin;C:/Program Files/Java/jre6/lib/i386;C:\Perl\site\bin;C:\Perl\bin;C:\Ruby200\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Windows Live\Shared;C:\Users\theo\Desktop\eclipse; USERNAME=theo OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 5, GenuineIntel --------------- S Y S T E M --------------- OS: Windows 7 Build 7600 CPU:total 4 (8 cores per cpu, 2 threads per core) family 6 model 37 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, ht Memory: 4k page, physical 2097151k(1257972k free), swap 4194303k(4194303k free) vm_info: Java HotSpot(TM) Client VM (14.2-b01) for windows-x86 JRE (1.6.0_16-b01), built on Jul 31 2009 11:26:58 by "java_re" with MS VC++ 7.1 time: Wed Oct 23 22:00:12 2013 elapsed time: 0 seconds Code: Display.setDisplayMode(new DisplayMode(800,600)); Display.create();//Error here I am using JDK 6

  Read the article

• Dec 5th Links: ASP.NET, ASP.NET MVC, jQuery, Silverlight, Visual Studio

  - by ScottGu

  Here is the latest in my link-listing series.  Also check out my VS 2010 and .NET 4 series for another on-going blog series I’m working on. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET ASP.NET Code Samples Collection: J.D. Meier has a great post that provides a detailed round-up of ASP.NET code samples and tutorials from a wide variety of sources.  Lots of useful pointers. Slash your ASP.NET compile/load time without any hard work: Nice article that details a bunch of optimizations you can make to speed up ASP.NET project load and compile times. You might also want to read my previous blog post on this topic here. 10 Essential Tools for Building ASP.NET Websites: Great article by Stephen Walther on 10 great (and free) tools that enable you to more easily build great ASP.NET Websites.  Highly recommended reading. Optimize Images using the ASP.NET Sprite and Image Optimization Framework: A nice article by 4GuysFromRolla that discusses how to use the open-source ASP.NET Sprite and Image Optimization Framework (one of the tools recommended by Stephen in the previous article).  You can use this to significantly improve the load-time of your pages on the client. Formatting Dates, Times and Numbers in ASP.NET: Scott Mitchell has a great article that discusses formatting dates, times and numbers in ASP.NET.  A very useful link to bookmark.  Also check out James Michael’s DateTime is Packed with Goodies blog post for other DateTime tips. Examining ASP.NET’s Membership, Roles and Profile APIs (Part 18): Everything you could possibly want to known about ASP.NET’s built-in Membership, Roles and Profile APIs must surely be in this tutorial series. Part 18 covers how to store additional user info with Membership. ASP.NET with jQuery An Introduction to jQuery Templates: Stephen Walther has written an outstanding introduction and tutorial on the new jQuery Template plugin that the ASP.NET team has contributed to the jQuery project. Composition with jQuery Templates and jQuery Templates, Composite Rendering, and Remote Loading: Dave Ward has written two nice posts that talk about composition scenarios with jQuery Templates and some cool scenarios you can enable with them. Using jQuery and ASP.NET to Build a News Ticker: Scott Mitchell has a nice tutorial that demonstrates how to build a dynamically updated “news ticker” style UI with ASP.NET and jQuery. Checking All Checkboxes in a GridView using jQuery: Scott Mitchell has a nice post that covers how to use jQuery to enable a checkbox within a GridView’s header to automatically check/uncheck all checkboxes contained within rows of it. Using jQuery to POST Form Data to an ASP.NET AJAX Web Service: Rick Strahl has a nice post that discusses how to capture form variables and post them to an ASP.NET AJAX Web Service (.asmx). ASP.NET MVC ASP.NET MVC Diagnostics Using NuGet: Phil Haack has a nice post that demonstrates how to easily install a diagnostics page (using NuGet) that can help identify and diagnose common configuration issues within your apps. ASP.NET MVC 3 JsonValueProviderFactory: James Hughes has a nice post that discusses how to take advantage of the new JsonValueProviderFactory support built into ASP.NET MVC 3.  This makes it easy to post JSON payloads to MVC action methods. Practical jQuery Mobile with ASP.NET MVC: James Hughes has another nice post that discusses how to use the new jQuery Mobile library with ASP.NET MVC to build great mobile web applications. Credit Card Validator for ASP.NET MVC 3: Benjii Me has a nice post that demonstrates how to build a [CreditCard] validator attribute that can be used to easily validate credit card numbers are in the correct format with ASP.NET MVC. Silverlight Silverlight FireStarter Keynote and Sessions: A great blog post from John Papa that contains pointers and descriptions of all the great Silverlight content we published last week at the Silverlight FireStarter.  You can watch all of the talks online.  More details on my keynote and Silverlight 5 announcements can be found here. 31 Days of Windows Phone 7: 31 great tutorials on how to build Windows Phone 7 applications (using Silverlight).  Silverlight for Windows Phone Toolkit Update: David Anson has a nice post that discusses some of the additional controls provided with the Silverlight for Windows Phone Toolkit. Visual Studio JavaScript Editor Extensions: A nice (and free) Visual Studio plugin built by the web tools team that significantly improves the JavaScript intellisense support within Visual Studio. HTML5 Intellisense for Visual Studio: Gil has a blog post that discusses a new extension my team has posted to the Visual Studio Extension Gallery that adds HTML5 schema support to Visual Studio 2008 and 2010. Team Build + Web Deployment + Web Deploy + VS 2010 = Goodness: Visual blogs about how to enable a continuous deployment system with VS 2010, TFS 2010 and the Microsoft Web Deploy framework.  Visual Studio 2010 Emacs Emulation Extension and VIM Emulation Extension: Check out these two extensions if you are fond of Emacs and VIM key bindings and want to enable them within Visual Studio 2010. Hope this helps, Scott

  Read the article

• Creating packages in code – Execute SQL Task

  The Execute SQL Task is for obvious reasons very well used, so I thought if you are building packages in code the chances are you will be using it. Using the task basic features of the task are quite straightforward, add the task and set some properties, just like any other. When you start interacting with variables though it can be a little harder to grasp so these samples should see you through. Some of these more advanced features are explained in much more detail in our ever popular post The Execute SQL Task, here I’ll just be showing you how to implement them in code. The abbreviated code blocks below demonstrate the different features of the task. The complete code has been encapsulated into a sample class which you can download (ExecSqlPackage.cs). Each feature described has its own method in the sample class which is mentioned after the code block. This first sample just shows adding the task, setting the basic properties for a connection and of course an SQL statement. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, "localhost", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Set required properties taskHost.Properties["Connection"].SetValue(taskHost, sqlConnection.ID); taskHost.Properties["SqlStatementSource"].SetValue(taskHost, "SELECT * FROM sysobjects"); For the full version of this code, see the CreatePackage method in the sample class. The AddSqlConnection method is a helper method that adds an OLE-DB connection to the package, it is of course in the sample class file too. Returning a single value with a Result Set The following sample takes a different approach, getting a reference to the ExecuteSQLTask object task itself, rather than just using the non-specific TaskHost as above. Whilst it means we need to add an extra reference to our project (Microsoft.SqlServer.SQLTask) it makes coding much easier as we have compile time validation of any property and types we use. For the more complex properties that is very valuable and saves a lot of time during development. The query has also been changed to return a single value, one row and one column. The sample shows how we can return that value into a variable, which we also add to our package in the code. To do this manually you would set the Result Set property on the General page to Single Row and map the variable on the Result Set page in the editor. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, "localhost", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Add variable to hold result value package.Variables.Add("Variable", false, "User", 0); // Get the task object ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask; // Set core properties task.Connection = sqlConnection.Name; task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'"; // Set single row result set task.ResultSetType = ResultSetType.ResultSetType_SingleRow; // Add result set binding, map the id column to variable task.ResultSetBindings.Add(); IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0); resultBinding.ResultName = "id"; resultBinding.DtsVariableName = "User::Variable"; For the full version of this code, see the CreatePackageResultVariable method in the sample class. The other types of Result Set behaviour are just a variation on this theme, set the property and map the result binding as required. Parameter Mapping for SQL Statements This final example uses a parameterised SQL statement, with the coming from a variable. The syntax varies slightly between connection types, as explained in the Working with Parameters and Return Codes in the Execute SQL Taskhelp topic, but OLE-DB is the most commonly used, for which a question mark is the parameter value placeholder. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, ".", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Get the task object ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask; // Set core properties task.Connection = sqlConnection.Name; task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = ?"; // Add variable to hold parameter value package.Variables.Add("Variable", false, "User", "sysrowsets"); // Add input parameter binding task.ParameterBindings.Add(); IDTSParameterBinding parameterBinding = task.ParameterBindings.GetBinding(0); parameterBinding.DtsVariableName = "User::Variable"; parameterBinding.ParameterDirection = ParameterDirections.Input; parameterBinding.DataType = (int)OleDBDataTypes.VARCHAR; parameterBinding.ParameterName = "0"; parameterBinding.ParameterSize = 255; For the full version of this code, see the CreatePackageParameterVariable method in the sample class. You’ll notice the data type has to be specified for the parameter IDTSParameterBinding .DataType Property, and these type codes are connection specific too. My enumeration I wrote several years ago is shown below was probably done by reverse engineering a package and also the API header file, but I recently found a very handy post that covers more connections as well for exactly this, Setting the DataType of IDTSParameterBinding objects (Execute SQL Task). /// <summary> /// Enumeration of OLE-DB types, used when mapping OLE-DB parameters. /// </summary> private enum OleDBDataTypes { BYTE = 0x11, CURRENCY = 6, DATE = 7, DB_VARNUMERIC = 0x8b, DBDATE = 0x85, DBTIME = 0x86, DBTIMESTAMP = 0x87, DECIMAL = 14, DOUBLE = 5, FILETIME = 0x40, FLOAT = 4, GUID = 0x48, LARGE_INTEGER = 20, LONG = 3, NULL = 1, NUMERIC = 0x83, NVARCHAR = 130, SHORT = 2, SIGNEDCHAR = 0x10, ULARGE_INTEGER = 0x15, ULONG = 0x13, USHORT = 0x12, VARCHAR = 0x81, VARIANT_BOOL = 11 } Download Sample code ExecSqlPackage.cs (10KB)

  Read the article

• XNA Notes 007

  - by George Clingerman

  Every week I keep wondering if there’s going to be enough activity in the community to keep doing these notes on a weekly basis and every week I’m reminded of just how awesome and active the XNA community is. There’s engines being made, tutorials being created, games being crafted. There’s information being shared, questions being answered and then there’s another whole community around the Xbox LIVE Indie Games themselves. It’s really incredibly to just watch all that’s going on and I’m glad I’m playing a small part in all of this. So here’s what I noticed happening in the XNA community last week. If there’s things I’m missing, always feel free to let me know. I love learning about new corners of the XNA community that I wasn’t aware of or just have been missing! XNA Developers: Uditha Bandara held an XNA Game Development Workshops at Singapore Universities http://uditha.wordpress.com/2011/02/18/xna-game-development-workshops-at-singapore-universities-event-update/ Binary Tweed gives his talks about Indie City and gives his opinion on the false promise of digital distribution http://www.develop-online.net/news/37053/OPINION-The-false-promise-of-digital-distribution Kris Steele posts his Trivia or Die postmortem http://www.krissteele.net/blogdetails.aspx?id=246 @MadNinjaSkills (James Johnston) posts his feelings on testing for XBLIG http://www.ezmuze.co.uk/101 Simon (@DDReaper) posts hints and tips for XNA developers to help get the size of their projects down http://twitter.com/#!/DDReaper/status/38279440924545024 http://xna-uk.net/blogs/darkgenesis/archive/2011/02/17/look-at-the-size-of-that-thing.aspx Michael B. McLaughlin proving why he should be an XNA MVP posts the list of commonly used value types in XNA games http://geekswithblogs.net/mikebmcl/archive/2011/02/17/list-of-commonly-used-value-types-in-xna-games.aspx http://twitter.com/#!/mikebmcl/status/38166541354811392 Paul Powell (@ITSligoPaul) posts about a common sprite batch as a game service http://itspaulsblog.blogspot.com/2011/02/xna-common-sprite-batch-as-game-service.html @SigilXNA (John Defenbaugh) posts his new level editor video for the sequel to Opac’s Journey http://twitter.com/SigilXNA/statuses/36548174373982209 http://twitter.com/#!/SigilXNA/status/36548174373982209 http://youtu.be/QHbmxB_2AW8 @jwatte updates kW Animation for XNA 4.0 http://www.enchantedage.com/xna-animation @DSebJ posts Blender to SunBurn http://twitter.com/#!/DSebJ/status/36564920224976896 http://dsebj.evolvingsoftware.com/?p=187 Ads and WP7 Games - @mechaghost shares his revenue data for his ad based games http://www.occasionalgamer.com/2011/02/09/ads-and-wp7-games/ Xbox LIVE Indie Games (XBLIG): Steven Hurdle posts day 100 of his quest to find a fantastic XBLIG purchase every day http://writingsofmassdeduction.com/2011/02/17/day-100-radiangames-ballistic/ Xbox 360 Indie Game Buying Guide - 12 games for $60 including several Xbox LIVE Indie games! (although if the XNA community was asked we could have recommended 60 games for $60...) http://www.indiegamemag.com/xbox360-indie-games-buying-guide/ The best selling Xbox LIVE Indie games of 2010 http://www.1up.com/news/xbox-live-most-popular-games I’d buy that for a dollar! - the California Literary Review points out a few gems on the XBLIG marketplace (and other places) where you can game on the cheap. http://calitreview.com/14125 Armless Octopus Episode 39 - The Indie Gem Octocast http://www.armlessoctopus.com/2011/02/17/armless-octocast-episode-39-the-indie-gem-octocast/ Ska Studios posts a plethora of updates http://www.ska-studios.com/2011/02/11/good-morning-gato-49/ http://www.ska-studios.com/2011/02/14/vampire-smile-valentines/ http://www.ska-studios.com/2011/02/16/the-dishwasher-vs-finds-a-home/ Kotaku posts about the Xbox LIVE Indie Game that makes you go Pew Pew Pew Pew Pew Pew http://kotaku.com/#!5760632/the-game-that-makes-you-go-pew-pew-pew-pew-pew-pew-pew GameMarx continues to be active and doing a ton for the XBLIG community reviews and Top 5 indie games of the week 2/4-2/10 http://www.gamemarx.com/video/the-show/22/ep-9-february-11-2010.aspx a new podcast Xbox Indie New Releases http://twitter.com/#!/gamemarx/status/36888849107910656 http://www.gamemarx.com/news/2011/02/13/a-new-podcast-xbox-indie-new-releases.aspx @MasterBlud uploads Indocalypse XBLIG Collections #2 http://www.youtube.com/watch?v=uzCZSv075mc&feature=youtu.be&a http://twitter.com/#!/MasterBlud/status/37100029697064960 Just Press Start interviews Michael Hicks from MichaelArts, 18 year old creator of Honor in Vengeance http://justpressstart.net/?p=465 Achievement Locked interviews Kris Steele of FunInfused Games http://xboxindies.wordpress.com/2011/02/11/interview-fun-infused-games/ XNA Game Development: XNA -UK launches their XAP test service to help the XNA community http://xna-uk.net/blogs/news/archive/2011/02/18/xna-uk-xap-test-service-now-live.aspx Transmute shows off a video of the standard character editor http://www.youtube.com/watch?v=qqH6gErG948&feature=youtu.be Microsoft Tech Student introduces their first tech student of the month.  Meet Daniel Van Tassel from the University of Utah and learn how he created an Xbox LIVE Indie Game using XNA Studio http://blogs.msdn.com/b/techstudent/archive/2010/12/22/introducing-our-first-tech-student-of-the-month-daniel-van-tassel.aspx XNA for Silverlight Developers Part 3 - Animation (transforms) http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-3-Animation-transforms.aspx XNA for Silverlight Developers Part 4 - Animation (frame based) http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-4-Animation-frame-based.aspx @suhinini tweets about an XNA Sprite Font generation tool http://twitter.com/#!/suhinini/status/36841370131890176 http://www.nubik.com/SpriteFont/ XNATouch 1.5 is out and in it’s words is faster, simpler, more reliable and has the XNA 4.0 API http://monogame.codeplex.com/releases/view/60815 IndieCity is hosting marketing workshops for Indie Developers (UK and US) http://forums.create.msdn.com/forums/p/75197/457654.aspx#457654 New York Students - Learn XNA and Silverlight for Xbox 360 and Windows Phone 7 http://forums.create.msdn.com/forums/p/72753/456964.aspx#456964 http://blogs.msdn.com/b/andrewparsons/archive/2011/01/13/learn-to-build-your-own-games-for-xbox-360-and-windows-phone-7.aspx http://blogs.msdn.com/b/andrewparsons/archive/2011/01/13/build-a-game-in-48-hours-win-a-kinect-or-windows-phone-7.aspx Extra Credits: Videogame Music http://www.escapistmagazine.com/videos/view/extra-credits/2019-Videogame-Music Steve Pavlina posts an article with useful information for all XNA/XBLIG developers http://www.stevepavlina.com/blog/2011/02/completion-vs-perfection/

  Read the article

• SQLAuthority News – A Successful Community TechDays at Ahmedabad – December 11, 2010

  - by pinaldave

  We recently had one of the best community events in Ahmedabad. We were fortunate that we had SQL Experts from around the world to have presented at this event. This gathering was very special because besides Jacob Sebastian and myself, we had two other speakers traveling all the way from Florida (Rushabh Mehta) and Bangalore (Vinod Kumar).There were a total of nearly 170 attendees and the event was blast. Here are the details of the event. Pinal Dave Presenting at Community Tech Days On the day of the event, it seemed to be the coldest day in Ahmedabad but I was glad to see hundreds of people waiting for the doors to be opened some hours before. We started the day with hot coffee and cookies. Yes, food first; and it was right after my keynote. I could clearly see that the coffee did some magic right away; the hall was almost full after the coffee break. Jacob Sebastian Presenting at Community Tech Days Jacob Sebastian, an SQL Server MVP and a close friend of mine, had an unusual job of surprising everybody with an innovative topic accompanied with lots of question-and-answer portions. That’s definitely one thing to love Jacob, that is, the novelty of the subject. His presentation was entitled “Best Database Practices for the .Net”; it really created magic on the crowd. Pinal Dave Presenting at Community Tech Days Next to Jacob Sebastian, I presented “Best Database Practices for the SharePoint”. It was really fun to present Database with the perspective of the database itself. The main highlight of my presentation was when I talked about how one can speed up the database performance by 40% for SharePoint in just 40 seconds. It was fun because the most important thing was to convince people to use the recommendation as soon as they walk out of the session. It was really amusing and the response of the participants was remarkable. Pinal Dave Presenting at Community Tech Days My session was followed by the most-awaited session of the day: that of Rushabh Mehta. He is an international BI expert who traveled all the way from Florida to present “Self Service BI” session. This session was funny and truly interesting. In fact, no one knew BI could be this much entertaining and fascinating. Rushabh has an appealing style of presenting the session; he instantly got very much interaction from the audience. Rushabh Mehta Presenting at Community Tech Days We had a networking lunch break in-between, when we talked about many various topics. It is always interesting to get in touch with the Community and feel a part of it. I had a wonderful time during the break. Vinod Kumar Presenting at Community Tech Days After lunch was apparently the most difficult session for the presenter as during this time, many people started to fall sleep and get dizzy. This spot was requested by Microsoft SQL Server Evangelist Vinod Kumar himself. During our discussion he suggested that if he gets this slot he would make sure people are up and more interactive than during the morning session. Just like always, this session was one of the best sessions ever. Vinod is true to his word as he presented the subject of “Time Management for Developer”. This session was the biggest hit in the event because the subject was instilled in the mind of every participant. Vinod Kumar Presenting at Community Tech Days Vinod’s session was followed by his own small session. Due to “insistent public demand”, he presented an interesting subject, “Tricks and Tips of SQL Server“. In 20 minutes he has done another awesome job and all attendees wanted more of the tricks. Just as usual he promised to do that next time for us. Vinod’s session was succeeded by Prabhjot Singh Bakshi’s session. He presented an appealing Silverlight concept. Just the same, he did a great job and people cheered him. Prabhjot Presenting at Community Tech Days We had a special invited speaker, Dhananjay Kumar, traveling all the way from Pune. He always supports our cause to help the Community in empowering participants. He presented the topic about Win7 Mobile and SharePoint integration. This was something many did not even expect to be possible. Kudos to Dhananjay for doing a great job. Dhananjay Kumar Presenting at Community Tech Days All in all, this event was one of the best in the Community Tech Days series in Ahmedabad. We were fortunate that legends from the all over the world were present here to present to the Community. I’d say never underestimate the power of the Community and its influence over the direction of the technology. Vinod Kumar Presenting trophy to Pinal Dave Vinod Kumar Presenting trophy to Pinal Dave This event was a very special gathering to me personally because of your support to the vibrant Community. The following awards were won for last year’s performance: Ahmedabad SQL Server User Group (President: Jacob Sebastian; Leader: Pinal Dave) – Best Tier 2 User Group Best Development Community Individual Contributor – Pinal Dave Speakers I was very glad to receive the award for our entire Community. Attendees at Community Tech Days I want to say thanks to Rushabh Mehta, Vinod Kumar and Dhananjay Kumar for visiting the city and presenting various technology topics in Community Tech Days. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• The Challenge with HTML5 – In Pictures

  - by dwahlin

  I love working with Web technologies and am looking forward to the new functionality that HTML5 will ultimately bring to the table (some of which can be used today). Having been through the div versus layer battle back in the IE4 and Netscape 4 days I think we’re headed down that road again as a result of browsers implementing features differently. I’ve been spending a lot of time researching and playing around with HTML5 samples and features (mainly because we’re already seeing demand for training on HTML5) and there’s a lot of great stuff there that will truly revolutionize web applications as we know them. However, browsers just aren’t there yet and many people outside of the development world don’t really feel a need to upgrade their browser if it’s working reasonably well (Mom and Dad come to mind) so it’s going to be awhile. There’s a nice test site at http://www.HTML5Test.com that runs through different HTML5 features and scores how well they’re supported. They don’t test for everything and are very clear about that on the site: “The HTML5 test score is only an indication of how well your browser supports the upcoming HTML5 standard and related specifications. It does not try to test all of the new features offered by HTML5, nor does it try to test the functionality of each feature it does detect. Despite these shortcomings we hope that by quantifying the level of support users and web developers will get an idea of how hard the browser manufacturers work on improving their browsers and the web as a development platform. The score is calculated by testing for the many new features of HTML5. Each feature is worth one or more points. Apart from the main HTML5 specification and other specifications created the W3C HTML Working Group, this test also awards points for supporting related drafts and specifications. Some of these specifications were initially part of HTML5, but are now further developed by other W3C working groups. WebGL is also part of this test despite not being developed by the W3C, because it extends the HTML5 canvas element with a 3d context. The test also awards bonus points for supporting audio and video codecs and supporting SVG or MathML embedding in a plain HTML document. These test do not count towards the total score because HTML5 does not specify any required audio or video codec. Also SVG and MathML are not required by HTML5, the specification only specifies rules for how such content should be embedded inside a plain HTML file. Please be aware that the specifications that are being tested are still in development and could change before receiving an official status. In the future new tests will be added for the pieces of the specification that are currently still missing. The maximum number of points that can be scored is 300 at this moment, but this is a moving goalpost.” It looks like their tests haven’t been updated since June, but the numbers are pretty scary as a developer because it means I’m going to have to do a lot of browser sniffing before assuming a particular feature is available to use. Not that much different from what we do today as far as browser sniffing you say? I’d have to disagree since HTML5 takes it to a whole new level. In today’s world we have script libraries such as jQuery (my personal favorite), Prototype, script.aculo.us, YUI Library, MooTools, etc. that handle the heavy lifting for us. Until those libraries handle all of the key HTML5 features available it’s going to be a challenge. Certain features such as Canvas are supported fairly well across most of the major browsers while other features such as audio and video are hit or miss depending upon what codec you want to use. Run the tests yourself to see what passes and what fails for different browsers. You can also view the HTML5 Test Suite Conformance Results at http://test.w3.org/html/tests/reporting/report.htm (a work in progress). The table below lists the scores that the HTML5Test site returned for different browsers I have installed on my desktop PC and laptop. A specific list of tests run and features supported are given when you go to the site. Note that I went ahead and tested the IE9 beta and it didn’t do nearly as good as I expected it would, but it’s not officially out yet so I expect that number will change a lot. Am I opposed to HTML5 as a result of these tests? Of course not - I’m actually really excited about what it offers.  However, I’m trying to be realistic and feel it'll definitely add a new level of headache to the Web application development process having been through something like this many years ago. On the flipside, developers that are able to target a specific browser (typically Intranet apps) or master the cross-browser issues are going to release some pretty sweet applications. Check out http://html5gallery.com/ for a look at some of the more cutting-edge sites out there that use HTML5. Also check out the http://www.beautyoftheweb.com site that Microsoft put together to showcase IE9. Chrome 8 Safari 5 for Windows     Opera 10 Firefox 3.6     Internet Explorer 9 Beta (Note that it’s still beta) Internet Explorer 8

  Read the article

• UCM 11g is 4 days old!

  - by kyle.hatlestad

  Ok...so I missed posting a blog entry when UCM 11g and the entire ECM suite released on Tuesday. Hopefully you've already seen the announcements on any number of the Oracle ECM blogs out there such as ECM Alerts, Fusion ECM, bex huff, or C4. So I won't bore you with the same talking points like 179 million check-ins per day or 124 web site page hits per second. Instead, I thought I'd show some screenshots of the new features in UCM and URM 11g. WebLogic Server and Enterprise Manager So probably the biggest change in 11g is UCM and URM now run on top of the WebLogic Server application server. This is a huge step as ECM is now on a standard platform with the rest of Oracle Fusion Middleware which makes installation, configuration, and integration consistent among all the products. From a feature perspective, it's also beneficial because it's now integrated with Oracle Enterprise Manager. Enterprise Manager provides a lot of provisioning control over servers as well as performance monitoring and access to logs and debugging information. Desktop Integration Suite Desktop Integration Suite got a complete overhaul for 11g. It exposes a lot more features within Windows Explorer such as saved searches, workflow queue, and checked-out items. It also now support metadata pop-up screens to let users fill in additional metadata when they drag-n-drop files in! And the integration within Office applications has changed significantly by introducing a dedicated UCM menu to do open, save, compare, etc. Site Studio for External Applications In UCM Site Studio 10gR4, a major architectural shift was introduced which brought several new objects such as elements, region definitions, region templates, and placeholder definitions. This truly separated the content from the display and from the definition. It also allowed separation of the content from needing to be rendered on a complete Site Studio page. Well, the new Site Studio for External Applications takes advantage of that architecture and introduces pre-built tags and plug-ins to JDeveloper to allow to go from simply adding a content area to your web application page to building an entire web site, just like you would have done in Site Studio Designer. In addition to these changes, enhancements to the core Site Studio have been added as well. One of the big ones is called Designer Mode which allows power-users to bypass the standard rules defined by the placeholder definition or template and perform any number of additional actions. This reduces the need to go back to Site Studio Designer or JDeveloper to make more advanced changes to the site. Dashboards As part of the updated records management functionality in both UCM and URM, users can now set a dashboard view on their home page to surface common functions in a single view. It has pre-built "portlets" users can choose from to display and organize they way they want. Behind the scenes, these dashboards are stored as Content Folios. So the dashboards themselves are content items that can be revisioned and shared between users. And new dashboard portlets can be easily added (like the User Profile one in the screenshots) by getting a copy of an existing one, modifying the display, and then checking it in as a new one to select from. URM Interface Enhancements URM includes several new UI and usability enhancements in 11g. There is a new view for physical records, a place to configure "favorite" items to quickly get to, and new placement of the records management menu. BI Publisher Reports Records management in UCM and URM now offer reports generated through embedded BI Publisher. Templates are controlled by rich text files checked directly into the repository, so they can be easily modified. Other Features A new Inbound Refinery conversion option is available that does native Microsoft Office HTML conversion. If your IBR is on Windows and you have the native applications loaded, the IBR can use them to produce HTML. A new GUI template editor for Dynamic Converter is available. It's written in Java so is available through all the supported browsers and platforms. The original ActiveX based editor is also still available. The Component Manager interface has changed to help provide an easier and more descriptive way to enable core components that are installed along with UCM. All of the supported components are immediately available to turn on and do not have to be installed separately as in previous versions. My Downloads is located in the My Content Server menu and provides for easy download of client installs including Desktop Integration Suite and Site Studio Designer. Well, hopefully that gives you a taste for some of the new things in 11g. We're all pretty excited here at Oracle about all the new changes and enhancements. Over the next few months I hope to highlight some of these features more in-depth, so keep your eye out for those posts.

  Read the article

• Creating packages in code – Execute SQL Task

  The Execute SQL Task is for obvious reasons very well used, so I thought if you are building packages in code the chances are you will be using it. Using the task basic features of the task are quite straightforward, add the task and set some properties, just like any other. When you start interacting with variables though it can be a little harder to grasp so these samples should see you through. Some of these more advanced features are explained in much more detail in our ever popular post The Execute SQL Task, here I’ll just be showing you how to implement them in code. The abbreviated code blocks below demonstrate the different features of the task. The complete code has been encapsulated into a sample class which you can download (ExecSqlPackage.cs). Each feature described has its own method in the sample class which is mentioned after the code block. This first sample just shows adding the task, setting the basic properties for a connection and of course an SQL statement. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, "localhost", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Set required properties taskHost.Properties["Connection"].SetValue(taskHost, sqlConnection.ID); taskHost.Properties["SqlStatementSource"].SetValue(taskHost, "SELECT * FROM sysobjects"); For the full version of this code, see the CreatePackage method in the sample class. The AddSqlConnection method is a helper method that adds an OLE-DB connection to the package, it is of course in the sample class file too. Returning a single value with a Result Set The following sample takes a different approach, getting a reference to the ExecuteSQLTask object task itself, rather than just using the non-specific TaskHost as above. Whilst it means we need to add an extra reference to our project (Microsoft.SqlServer.SQLTask) it makes coding much easier as we have compile time validation of any property and types we use. For the more complex properties that is very valuable and saves a lot of time during development. The query has also been changed to return a single value, one row and one column. The sample shows how we can return that value into a variable, which we also add to our package in the code. To do this manually you would set the Result Set property on the General page to Single Row and map the variable on the Result Set page in the editor. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, "localhost", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Add variable to hold result value package.Variables.Add("Variable", false, "User", 0); // Get the task object ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask; // Set core properties task.Connection = sqlConnection.Name; task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'"; // Set single row result set task.ResultSetType = ResultSetType.ResultSetType_SingleRow; // Add result set binding, map the id column to variable task.ResultSetBindings.Add(); IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0); resultBinding.ResultName = "id"; resultBinding.DtsVariableName = "User::Variable"; For the full version of this code, see the CreatePackageResultVariable method in the sample class. The other types of Result Set behaviour are just a variation on this theme, set the property and map the result binding as required. Parameter Mapping for SQL Statements This final example uses a parameterised SQL statement, with the coming from a variable. The syntax varies slightly between connection types, as explained in the Working with Parameters and Return Codes in the Execute SQL Taskhelp topic, but OLE-DB is the most commonly used, for which a question mark is the parameter value placeholder. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, ".", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Get the task object ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask; // Set core properties task.Connection = sqlConnection.Name; task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = ?"; // Add variable to hold parameter value package.Variables.Add("Variable", false, "User", "sysrowsets"); // Add input parameter binding task.ParameterBindings.Add(); IDTSParameterBinding parameterBinding = task.ParameterBindings.GetBinding(0); parameterBinding.DtsVariableName = "User::Variable"; parameterBinding.ParameterDirection = ParameterDirections.Input; parameterBinding.DataType = (int)OleDBDataTypes.VARCHAR; parameterBinding.ParameterName = "0"; parameterBinding.ParameterSize = 255; For the full version of this code, see the CreatePackageParameterVariable method in the sample class. You’ll notice the data type has to be specified for the parameter IDTSParameterBinding .DataType Property, and these type codes are connection specific too. My enumeration I wrote several years ago is shown below was probably done by reverse engineering a package and also the API header file, but I recently found a very handy post that covers more connections as well for exactly this, Setting the DataType of IDTSParameterBinding objects (Execute SQL Task). /// <summary> /// Enumeration of OLE-DB types, used when mapping OLE-DB parameters. /// </summary> private enum OleDBDataTypes { BYTE = 0x11, CURRENCY = 6, DATE = 7, DB_VARNUMERIC = 0x8b, DBDATE = 0x85, DBTIME = 0x86, DBTIMESTAMP = 0x87, DECIMAL = 14, DOUBLE = 5, FILETIME = 0x40, FLOAT = 4, GUID = 0x48, LARGE_INTEGER = 20, LONG = 3, NULL = 1, NUMERIC = 0x83, NVARCHAR = 130, SHORT = 2, SIGNEDCHAR = 0x10, ULARGE_INTEGER = 0x15, ULONG = 0x13, USHORT = 0x12, VARCHAR = 0x81, VARIANT_BOOL = 11 } Download Sample code ExecSqlPackage.cs (10KB)

  Read the article

• Creating an ASP.NET report using Visual Studio 2010 - Part 3

  - by rajbk

  We continue building our report in this three part series. Creating an ASP.NET report using Visual Studio 2010 - Part 1 Creating an ASP.NET report using Visual Studio 2010 - Part 2 Adding the ReportViewer control and filter drop downs. Open the source code for index.aspx and add a ScriptManager control. This control is required for the ReportViewer control. Add a DropDownList for the categories and suppliers. Add the ReportViewer control. The markup after these steps is shown below. <div> <asp:ScriptManager ID="smScriptManager" runat="server"> </asp:ScriptManager> <div id="searchFilter"> Filter by: Category : <asp:DropDownList ID="ddlCategories" runat="server" /> and Supplier : <asp:DropDownList ID="ddlSuppliers" runat="server" /> </div> <rsweb:ReportViewer ID="rvProducts" runat="server"> </rsweb:ReportViewer> </div> The design view for index.aspx is shown below. The dropdowns will display the categories and suppliers in the database. Changing the selection in the drop downs will cause the report to be filtered by the selections in the dropdowns. You will see how to do this in the next steps.   Attaching the RDLC to the ReportViewer control by clicking on the top right of the control, going to Report Viewer tasks and selecting Products.rdlc.   Resize the ReportViewer control by dragging at the bottom right corner. I set mine to 800px x 500px. You can also set this value in source view. Defining the data sources. We will now define the Data Source used to populate the report. Go back to the “ReportViewer Tasks” and select “Choose Data Sources” Select a “New data source..” Select “Object” and name your Data Source ID “odsProducts”   In the next screen, choose “ProductRepository” as your business object. Choose “GetProductsProjected” in the next screen.   The method requires a SupplierID and CategoryID. We will set these so that our data source gets the values from the drop down lists we defined earlier. Set the parameter source to be of type “Control” and set the ControlIDs to be ddlSuppliers and ddlCategories respectively. Your screen will look like this: We are now going to define the data source for our drop downs. Select the ddlCategory drop down and pick “Choose Data Source”. Pick “Object” and give it an id “odsCategories”   In the next screen, choose “ProductRepository” Select the GetCategories() method in the next screen.   Select “CategoryName” and “CategoryID” in the next screen. We are done defining the data source for the Category drop down. Perform the same steps for the Suppliers drop down.   Select each dropdown and set the AppendDataBoundItems to true and AutoPostback to true.     The AppendDataBoundItems is needed because we are going to insert an “All“ list item with a value of empty. Go to each drop down and add this list item markup as shown below> Finally, double click on each drop down in the designer and add the following code in the code behind. This along with the “Autopostback= true” attribute refreshes the report anytime a drop down is changed. protected void ddlCategories_SelectedIndexChanged(object sender, EventArgs e) { rvProducts.LocalReport.Refresh(); }   protected void ddlSuppliers_SelectedIndexChanged(object sender, EventArgs e) { rvProducts.LocalReport.Refresh(); } Compile your report and run the page. You should see the report rendered. Note that the tool bar in the ReportViewer control gives you a couple of options including the ability to export the data to Excel, PDF or word.   Conclusion Through this three part series, we did the following: Created a data layer for use by our RDLC. Created an RDLC using the report wizard and define a dataset for the report. Used the report design surface to design our report including adding a chart. Used the ReportViewer control to attach the RDLC. Connected our ReportWiewer to a data source and take parameter values from the drop downlists. Used AutoPostBack to refresh the reports when the dropdown selection was changed. RDLCs allow you to create interactive reports including drill downs and grouping. For even more advanced reports you can use Microsoft® SQL Server™ Reporting Services with RDLs. With RDLs, the report is rendered on the report server instead of the web server. Another nice thing about RDLs is that you can define a parameter list for the report and it gets rendered automatically for you. RDLCs and RDLs both have their advantages and its best to compare them and choose the right one for your requirements. Download VS2010 RTM Sample project NorthwindReports.zip   Alfred Borden: Are you watching closely?

  Read the article

• Linux-Containers — Part 1: Overview

  - by Lenz Grimmer

  "Containers" by Jean-Pierre Martineau (CC BY-NC-SA 2.0). Linux Containers (LXC) provide a means to isolate individual services or applications as well as of a complete Linux operating system from other services running on the same host. To accomplish this, each container gets its own directory structure, network devices, IP addresses and process table. The processes running in other containers or the host system are not visible from inside a container. Additionally, Linux Containers allow for fine granular control of resources like RAM, CPU or disk I/O. Generally speaking, Linux Containers use a completely different approach than "classicial" virtualization technologies like KVM or Xen (on which Oracle VM Server for x86 is based on). An application running inside a container will be executed directly on the operating system kernel of the host system, shielded from all other running processes in a sandbox-like environment. This allows a very direct and fair distribution of CPU and I/O-resources. Linux containers can offer the best possible performance and several possibilities for managing and sharing the resources available. Similar to Containers (or Zones) on Oracle Solaris or FreeBSD jails, the same kernel version runs on the host as well as in the containers; it is not possible to run different Linux kernel versions or other operating systems like Microsoft Windows or Oracle Solaris for x86 inside a container. However, it is possible to run different Linux distribution versions (e.g. Fedora Linux in a container on top of an Oracle Linux host), provided it supports the version of the Linux kernel that runs on the host. This approach has one caveat, though - if any of the containers causes a kernel crash, it will bring down all other containers (and the host system) as well. For example, Oracle's Unbreakable Enterprise Kernel Release 2 (2.6.39) is supported for both Oracle Linux 5 and 6. This makes it possible to run Oracle Linux 5 and 6 container instances on top of an Oracle Linux 6 system. Since Linux Containers are fully implemented on the OS level (the Linux kernel), they can be easily combined with other virtualization technologies. It's certainly possible to set up Linux containers within a virtualized Linux instance that runs inside Oracle VM Server for Oracle VM Virtualbox. Some use cases for Linux Containers include: Consolidation of multiple separate Linux systems on one server: instances of Linux systems that are not performance-critical or only see sporadic use (e.g. a fax or print server or intranet services) do not necessarily need a dedicated server for their operations. These can easily be consolidated to run inside containers on a single server, to preserve energy and rack space. Running multiple instances of an application in parallel, e.g. for different users or customers. Each user receives his "own" application instance, with a defined level of service/performance. This prevents that one user's application could hog the entire system and ensures, that each user only has access to his own data set. It also helps to save main memory — if multiple instances of a same process are running, the Linux kernel can share memory pages that are identical and unchanged across all application instances. This also applies to shared libraries that applications may use, they are generally held in memory once and mapped to multiple processes. Quickly creating sandbox environments for development and testing purposes: containers that have been created and configured once can be archived as templates and can be duplicated (cloned) instantly on demand. After finishing the activity, the clone can safely be discarded. This allows to provide repeatable software builds and test environments, because the system will always be reset to its initial state for each run. Linux Containers also boot significantly faster than "classic" virtual machines, which can save a lot of time when running frequent build or test runs on applications. Safe execution of an individual application: if an application running inside a container has been compromised because of a security vulnerability, the host system and other containers remain unaffected. The potential damage can be minimized, analyzed and resolved directly from the host system. Note: Linux Containers on Oracle Linux 6 with the Unbreakable Enterprise Kernel Release 2 (2.6.39) are still marked as Technology Preview - their use is only recommended for testing and evaluation purposes. The Open-Source project "Linux Containers" (LXC) is driving the development of the technology behind this, which is based on the "Control Groups" (CGroups) and "Name Spaces" functionality of the Linux kernel. Oracle is actively involved in the Linux Containers development and contributes patches to the upstream LXC code base. Control Groups provide means to manage and monitor the allocation of resources for individual processes or process groups. Among other things, you can restrict the maximum amount of memory, CPU cycles as well as the disk and network throughput (in MB/s or IOP/s) that are available for an application. Name Spaces help to isolate process groups from each other, e.g. the visibility of other running processes or the exclusive access to a network device. It's also possible to restrict a process group's access and visibility of the entire file system hierarchy (similar to a classic "chroot" environment). CGroups and Name Spaces provide the foundation on which Linux containers are based on, but they can actually be used independently as well. A more detailed description of how Linux Containers can be created and managed on Oracle Linux will be explained in the second part of this article. Additional links related to Linux Containers: OTN Article: The Role of Oracle Solaris Zones and Linux Containers in a Virtualization Strategy Linux Containers on Wikipedia - Lenz Grimmer Follow me on: Personal Blog | Facebook | Twitter | Linux Blog |

  Read the article

• 8 Mac System Features You Can Access in Recovery Mode

  - by Chris Hoffman

  A Mac’s Recovery Mode is for more than just reinstalling Mac OS X. You’ll find many other useful troubleshooting utilities here — you can use these even if your Mac can’t boot normally. To access Recovery Mode, restart your Mac and press and hold the Command + R keys during the boot-up process. This is one of several hidden startup options on a Mac. Reinstall Mac OS X Most people know Recovery Mode as the place you go to reinstall OS X on your Mac. Recovery Mode will download the OS X installer files from teh Intenret if you don’t have them locally, so they don’t take up space on your disk and you’ll never have to hunt for an opearign system disc. Better yet, it will download up-to-date installation files so you don’t have to spend hours installing operating system updates later. Microsoft could learn a lot from Apple here. Restore From a Time Machine Backup Instead of reinstalling OS X, you can choose to restore your Mac from a time machine backup. This is like restoring a system image on another operating system. You’ll need an external disk containing a backup image created on the current computer to do this. Browse the Web The Get Help Online link opens the Safari web browser to Apple’s documentation site. It’s not limited to Apple’s website, though — you can navigate to any website you like. This feature allows you to access and use a browser on your Mac even if it isn’t booting properly. It’s ideal for looking up troubleshooting information. Manage Your Disks The Disk Utility option opens the same Disk Utility you can access from within Mac OS X. It allows you to partition disks, format them, scan disks for problems, wipe drives, and set up drives in a RAID configuration. If you need to edit partitions from outside your operating system, you can just boot into the recovery environment — you don’t have to download a special partitioning tool and boot into it. Choose the Default Startup Disk Click the Apple menu on the bar at the top of your screen and select Startup Disk to access the Choose Startup Disk tool. Use this tool to choose your computer’s default startup disk and reboot into another operating system. For example, it’s useful if you have Windows installed alongside Mac OS X with Boot Camp. Add or Remove an EFI Firmware Password You can also add a firmware password to your Mac. This works like a BIOS password or UEFI password on a Windows or Linux PC. Click the Utilities menu on the bar at the top of your screen and select Firmware Password Utility to open this tool. Use the tool to turn on a firmware password, which will prevent your computer from starting up from a different hard disk, CD, DVD, or USB drive without the password you provide. This prevents people form booting up your Mac with an unauthorized operating system. If you’ve already enabled a firmware password, you can remove it from here. Use Network Tools to Troubleshoot Your Connection Select Utilities > Network Utility to open a network diagnostic tool. This utility provides a graphical way to view your network connection information. You can also use the netstat, ping, lookup, traceroute, whois, finger, and port scan utilities from here. These can be helpful to troubleshoot Internet connection problems. For example, the ping command can demonstrate whether you can communicate with a remote host and show you if you’re experiencing packet loss, while the traceroute command can show you where a connection is failing if you can’t connect to a remote server. Open a Terminal If you’d like to get your hands dirty, you can select Utilities > Terminal to open a terminal from here. This terminal allows you to do more advanced troubleshooting. Mac OS X uses the bash shell, just as typical Linux distributions do. Most people will just need to use the Reinstall Mac OS X option here, but there are many other tools you can benefit from. If the Recovery Mode files on your Mac are damaged or unavailable, your Mac will automatically download them from Apple so you can use the full recovery environment.

  Read the article

• Diagnose PC Hardware Problems with an Ubuntu Live CD

  - by Trevor Bekolay

  So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• Searching for tasks with code – Executables and Event Handlers

  Searching packages or just enumerating through all tasks is not quite as straightforward as it may first appear, mainly because of the way you can nest tasks within other containers. You can see this illustrated in the sample package below where I have used several sequence containers and loops. To complicate this further all containers types, including packages and tasks, can have event handlers which can then support the full range of nested containers again. Towards the lower right, the task called SQL In FEL also has an event handler not shown, within which is another Execute SQL Task, so that makes a total of 6 Execute SQL Tasks 6 tasks spread across the package. In my previous post about such as adding a property expressionI kept it simple and just looked at tasks at the package level, but what if you wanted to find any or all tasks in a package? For this post I've written a console program that will search a package looking at all tasks no matter how deeply nested, and check to see if the name starts with "SQL". When it finds a matching task it writes out the hierarchy by name for that task, starting with the package and working down to the task itself. The output for our sample package is shown below, note it has found all 6 tasks, including the one on the OnPreExecute event of the SQL In FEL task TaskSearch v1.0.0.0 (1.0.0.0) Copyright (C) 2009 Konesans Ltd Processing File - C:\Projects\Alpha\Packages\MyPackage.dtsx MyPackage\FOR Counter Loop\SQL In Counter Loop MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL\OnPreExecute\SQL On Pre Execute for FEL SQL Task MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SEQ Nested Lvl 2\SQL In Nested Lvl 2 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #1 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #2 6 matching tasks found in package. The full project and code is available for download below, but first we can walk through the project to highlight the most important sections of code. This code has been abbreviated for this description, but is complete in the download. First of all we load the package, and then start by looking at the Executables for the package. // Load the package file Application application = new Application(); using (Package package = application.LoadPackage(filename, null)) { int matchCount = 0; // Look in the package's executables ProcessExecutables(package.Executables, ref matchCount); ... // // ... // Write out final count Console.WriteLine("{0} matching tasks found in package.", matchCount); } The ProcessExecutables method is a key method, as an executable could be described as the the highest level of a working functionality or container. There are several of types of executables, such as tasks, or sequence containers and loops. To know what to do next we need to work out what type of executable we are dealing with as the abbreviated version of method shows below. private static void ProcessExecutables(Executables executables, ref int matchCount) { foreach (Executable executable in executables) { TaskHost taskHost = executable as TaskHost; if (taskHost != null) { ProcessTaskHost(taskHost, ref matchCount); ProcessEventHandlers(taskHost.EventHandlers, ref matchCount); continue; } ... // // ... ForEachLoop forEachLoop = executable as ForEachLoop; if (forEachLoop != null) { ProcessExecutables(forEachLoop.Executables, ref matchCount); ProcessEventHandlers(forEachLoop.EventHandlers, ref matchCount); continue; } } } As you can see if the executable we find is a task we then call out to our ProcessTaskHost method. As with all of our executables a task can have event handlers which themselves contain more executables such as task and loops, so we also make a call out our ProcessEventHandlers method. The other types of executables such as loops can also have event handlers as well as executables. As shown with the example for the ForEachLoop we call the same ProcessExecutables and ProcessEventHandlers methods again to drill down into the hierarchy of objects that the package may contain. This code needs to explicitly check for each type of executable (TaskHost, Sequence, ForLoop and ForEachLoop) because whilst they all have an Executables property this is not from a common base class or interface. This example was just a simple find a task by its name, so ProcessTaskHost really just does that. We also get the hierarchy of objects so we can write out for information, obviously you can adapt this method to do something more interesting such as adding a property expression. private static void ProcessTaskHost(TaskHost taskHost, ref int matchCount) { if (taskHost == null) { return; } // Check if the task matches our match name if (taskHost.Name.StartsWith(TaskNameFilter, StringComparison.OrdinalIgnoreCase)) { // Build up the full object hierarchy of the task // so we can write it out for information StringBuilder path = new StringBuilder(); DtsContainer container = taskHost; while (container != null) { path.Insert(0, container.Name); container = container.Parent; if (container != null) { path.Insert(0, "\\"); } } // Write the task path // e.g. Package\Container\Event\Task Console.WriteLine(path); Console.WriteLine(); // Increment match counter for info matchCount++; } } Just for completeness, the other processing method we covered above is for event handlers, but really that just calls back to the executables. This same method is called in our main package method, but it was omitted for brevity here. private static void ProcessEventHandlers(DtsEventHandlers eventHandlers, ref int matchCount) { foreach (DtsEventHandler eventHandler in eventHandlers) { ProcessExecutables(eventHandler.Executables, ref matchCount); } } As hopefully the code demonstrates, executables (Microsoft.SqlServer.Dts.Runtime.Executable) are the workers, but within them you can nest more executables (except for task tasks).Executables themselves can have event handlers which can in turn hold more executables. I have tried to illustrate this highlight the relationships in the following diagram. Download Sample code project TaskSearch.zip (11KB)

  Read the article

• Silverlight 5 Hosting :: Features in Silverlight 5 and Release Date

  - by mbridge

  Silverlight 5 is finally announced in the Silverlight FireStarter Event on the 2nd December, 2010. This new version of Silverlight which was earlier labeled as 'Future of Microsoft Silverlight' has now come much closer to go live as the first Silverlight 5 Beta version is expected to be shipped during the early months of 2011. However for the full fledged and the final release of Silverlight 5, we have to wait many more months as the same is likely to be made available within the Q3 2011. As would have been usually expected, this latest edition would feature many new capabilities thereby extending the developer productivity to a whole new dimension of premium media experience and feature-rich business applications. It comes along with many new feature updates as well as the inclusion of new technologies to improve the standard of the Silverlight applications which are now fine-tuned to produce next generation business and media solutions that is capable to meet the requirements of the advanced web-based app development. The Silverlight 5 is all set to replace the previous fourth version which now includes more than forty new features while also dropping various deprecated elements that was prevalent earlier. It has brought around some major performance enhancements and also included better support for various other tools and technologies. Following are some of the changes that are registered to be available under the Silverlight 5 Beta edition which is scheduled to be launched during the Q1 2011. Silverlight 5 : Premium Media Experiences The media features of Silverlight 5 has seen some major enhancements with a lot of optimizations being made to deliver richer solutions. It's capability has now been extended to make things easier, faster and capable of performing the desired tasks in the most efficient manner. The Silverlight media solutions has already been a part of many companies in the recent days where various on-demand Silverlight services were featured but with the arrival of the next generation premium media solution of Silverlight 5, it is expected to register new heights of success and global user acclamation for using it with many esteemed web-based projects and media solutions. - The most happening element in the new Silverlight 5 will be its support for utilizing the GPU based hardware acceleration which is intended to lower down the CPU load to a significant extent and thereby allowing faster rendering of media contents without consuming much resources. This feature is believed to be particularly helpful for low configured machines to run full HD media content without any lagging caused due to processor load. It will hence be one great feature to revolutionize the new generation high quality media contents to be available within the web in a more efficient manner with its hardware decoded video playback capabilities. - With the inclusion of hardware video decoding to minimize the processor load, the Silverlight 5 also comes with another optimization enhancement to also reduce the power consumption level by making new methods to deal with the power-saver settings. With this optimization in effect, the computer would be automatically allowed to switch to sleep mode while no video playback is in progress and also to prevent any screensavers to popup and cause annoyances during any video playback. There would also be other power saver options which will be made available to best suit the users requirements and purpose. - The Silverlight trickplay feature is another great way to tweak any silverlight powered media content as is used for many video tutorial sites or for dealing with any sort of presentations. This feature enables the user to modify the playback speed to either slowdown or speedup during the playback durations based on the requirements without compromising on the quality of output. Normally such manipulations always makes the content's audio to go off-pitch, but the same will not be the case with TrickPlay and the audio would seamlessly progress with the video without skipping any of its part. - In addition to all of the above, the new Silverlight 5 will be featuring wireless control of all the media contents by making use of remote controllers. With the use of such remote devices, it will be easier to handle the various media playback controls thereby providing more freedom while experiencing the premium media services. Silverlight 5 : Business Application Development The application development standard has been extended with more possibilities by bringing forth new and useful technologies and also reviving the existing methods to work better than what it was used to. From the UI improvements to advanced technical aspects, the Silverlight 5 scores high on all grounds to produce great next generation business delivered applications by putting in more creativity and resourceful touch to all the apps being produced with it. - The WPF feature of Silverlight is made more effective by introducing new standards of Databinding which is intended to improve the productivity standards of the Silverlight application developer. It brings in a lot of convenience in debugging the databinding components or expressions and hence making things work in a flawless manner. Some additional features related to databinding includes that of Ancestor RelativeSource, Implicit DataTemplates and Model View ViewModel (MVVM) support with DataContextChanged event and many other new features relating it. - It now comes with a refined text and printing service which facilitates better clarity of the text rendering and also many positive changes which are being applied to the layout pattern. New supports has been added to include OpenType font, multi-column text, linked-text containers and character leading support to name a few among the available features.This also includes some important printing aspects like that of Postscript Vector Printing API which allows to program our printing tasks in a user defined way and Pivot functionality for visualization concerns of informations. - The Graphics support is the key improvements being incorporated which now enables to utilize three dimensional graphics pattern using GPU acceleration. It can manage to provide some really cool visualizations being curved to provide media contents within the business apps with also the support for full HD contents at 1080p quality. - Silverlight 5 includes the support for 64-bit operating systems and relevant browsers and is also optimized to provide better performance. It can support the background thread for the networking which can reduce the latency of the network to a considerable extent. The Out-of-Browser functionality adds the support for utilizing various libraries and also the Win32 API. It also comes with testing support with VS 2010 which is mostly an automated procedure and has also enabled increased security aspects of all the Silverlight 5 developed applications by using the improved version of group policy support.

  Read the article

• Pure Server-Side Filtering with RadGridView and WCF RIA Services

  Those of you who are familiar with WCF RIA Services know that the DomainDataSource control provides a FilterDescriptors collection that enables you to filter data returned by the query on the server. We have been using this DomainDataSource feature in our RIA Services with DomainDataSource online example for almost an year now. In the example, we are listening for RadGridViews Filtering event in order to intercept any filtering that is performed on the client and translate it to something that the DomainDataSource will understand, in this case a System.Windows.Data.FilterDescriptor being added or removed from its FilterDescriptors collection. Think of RadGridView.FilterDescriptors as client-side filtering and of DomainDataSource.FilterDescriptors as server-side filtering. We no longer need the client-side one. With the introduction of the Custom Filtering Controls feature many new possibilities have opened. With these custom controls we no longer need to do any filtering on the client. I have prepared a very small project that demonstrates how to filter solely on the server by using a custom filtering control. As I have already mentioned filtering on the server is done through the FilterDescriptors collection of the DomainDataSource control. This collection holds instances of type System.Windows.Data.FilterDescriptor. The FilterDescriptor has three important properties: PropertyPath: Specifies the name of the property that we want to filter on (the left operand). Operator: Specifies the type of comparison to use when filtering. An instance of FilterOperator Enumeration. Value: The value to compare with (the right operand). An instance of the Parameter Class. By adding filters, you can specify that only entities which meet the condition in the filter are loaded from the domain context. In case you are not familiar with these concepts you might find Brad Abrams blog interesting. Now, our requirements are to create some kind of UI that will manipulate the DomainDataSource.FilterDescriptors collection. When it comes to collections, my first choice of course would be RadGridView. If you are not familiar with the Custom Filtering Controls concept I would strongly recommend getting acquainted with my step-by-step tutorial Custom Filtering with RadGridView for Silverlight and checking the online example out. I have created a simple custom filtering control that contains a RadGridView and several buttons. This control is aware of the DomainDataSource instance, since it is operating on its FilterDescriptors collection. In fact, the RadGridView that is inside it is bound to this collection. In order to display filters that are relevant for the current column only, I have applied a filter to the grid. This filter is a Telerik.Windows.Data.FilterDescriptor and is used to filter the little grid inside the custom control. It should not be confused with the DomainDataSource.FilterDescriptors collection that RadGridView is actually bound to. These are the RIA filters. Additionally, I have added several other features. For example, if you have specified a DataFormatString on your original column, the Value column inside the custom control will pick it up and format the filter values accordingly. Also, I have transferred the data type of the column that you are filtering to the Value column of the custom control. This will help the little RadGridView determine what kind of editor to show up when you begin edit, for example a date picker for DateTime columns. Finally, I have added four buttons two of them can be used to add or remove filters and the other two will communicate the changes you have made to the server. Here is the full source code of the DomainDataSourceFilteringControl. The XAML: <UserControl x:Class="PureServerSideFiltering.DomainDataSourceFilteringControl"    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:telerikGrid="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.GridView"     xmlns:telerik="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls"     Width="300">     <Border x:Name="LayoutRoot"             BorderThickness="1"             BorderBrush="#FF8A929E"             Padding="5"             Background="#FFDFE2E5">           <Grid>             <Grid.RowDefinitions>                 <RowDefinition Height="Auto"/>                 <RowDefinition Height="150"/>                 <RowDefinition Height="Auto"/>             </Grid.RowDefinitions>               <StackPanel Grid.Row="0"                         Margin="2"                         Orientation="Horizontal"                         HorizontalAlignment="Center">                 <telerik:RadButton Name="addFilterButton"                                   Click="OnAddFilterButtonClick"                                   Content="Add Filter"                                   Margin="2"                                   Width="96"/>                 <telerik:RadButton Name="removeFilterButton"                                   Click="OnRemoveFilterButtonClick"                                   Content="Remove Filter"                                   Margin="2"                                   Width="96"/>             </StackPanel>               <telerikGrid:RadGridView Name="filtersGrid"                                     Grid.Row="1"                                     Margin="2"                                     ItemsSource="{Binding FilterDescriptors}"                                     AddingNewDataItem="OnFilterGridAddingNewDataItem"                                     ColumnWidth="*"                                     ShowGroupPanel="False"                                     AutoGenerateColumns="False"                                     CanUserResizeColumns="False"                                     CanUserReorderColumns="False"                                     CanUserFreezeColumns="False"                                     RowIndicatorVisibility="Collapsed"                                     IsFilteringAllowed="False"                                     CanUserSortColumns="False">                 <telerikGrid:RadGridView.Columns>                     <telerikGrid:GridViewComboBoxColumn DataMemberBinding="{Binding Operator}"                                                         UniqueName="Operator"/>                     <telerikGrid:GridViewDataColumn Header="Value"                                                     DataMemberBinding="{Binding Value.Value}"                                                     UniqueName="Value"/>                 </telerikGrid:RadGridView.Columns>             </telerikGrid:RadGridView>               <StackPanel Grid.Row="2"                         Margin="2"                         Orientation="Horizontal"                         HorizontalAlignment="Center">                 <telerik:RadButton Name="filterButton"                                   Click="OnApplyFiltersButtonClick"                                   Content="Apply Filters"                                   Margin="2"                                   Width="96"/>                 <telerik:RadButton Name="clearButton"                                   Click="OnClearFiltersButtonClick"                                   Content="Clear Filters"                                   Margin="2"                                   Width="96"/>             </StackPanel>           </Grid>       </Border> </UserControl>   And the code-behind: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using Telerik.Windows.Controls.GridView; using System.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Data;   namespace PureServerSideFiltering {     /// <summary>     /// A custom filtering control capable of filtering purely server-side.     /// </summary>     public partial class DomainDataSourceFilteringControl : UserControl, IFilteringControl     {         // The main player here.         DomainDataSource domainDataSource;           // This is the name of the property that this column displays.         private string dataMemberName;           // This is the type of the property that this column displays.         private Type dataMemberType;           /// <summary>         /// Identifies the <see cref="IsActive"/> dependency property.         /// </summary>         /// <remarks>         /// The state of the filtering funnel (i.e. full or empty) is bound to this property.         /// </remarks>         public static readonly DependencyProperty IsActiveProperty =             DependencyProperty.Register(                 "IsActive",                 typeof(bool),                 typeof(DomainDataSourceFilteringControl),                 new PropertyMetadata(false));           /// <summary>         /// Gets or sets a value indicating whether the filtering is active.         /// </summary>         /// <remarks>         /// Set this to true if you want to lit-up the filtering funnel.         /// </remarks>         public bool IsActive         {             get { return (bool)GetValue(IsActiveProperty); }             set { SetValue(IsActiveProperty, value); }         }           /// <summary>         /// Gets or sets the domain data source.         /// We need this in order to work on its FilterDescriptors collection.         /// </summary>         /// <value>The domain data source.</value>         public DomainDataSource DomainDataSource         {             get { return this.domainDataSource; }             set { this.domainDataSource = value; }         }           public System.Windows.Data.FilterDescriptorCollection FilterDescriptors         {             get { return this.DomainDataSource.FilterDescriptors; }         }           public DomainDataSourceFilteringControl()         {             InitializeComponent();         }           public void Prepare(GridViewBoundColumnBase column)         {             this.LayoutRoot.DataContext = this;               if (this.DomainDataSource == null)             {                 // Sorry, but we need a DomainDataSource. Can't do anything without it.                 return;             }               // This is the name of the property that this column displays.             this.dataMemberName = column.GetDataMemberName();               // This is the type of the property that this column displays.             // We need this in order to see which FilterOperators to feed to the combo-box column.             this.dataMemberType = column.DataType;               // We will use our magic Type extension method to see which operators are applicable for             // this data type. You can go to the extension method body and see what it does.             ((GridViewComboBoxColumn)this.filtersGrid.Columns["Operator"]).ItemsSource                 = this.dataMemberType.ApplicableFilterOperators();               // This is very nice as well. We will tell the Value column its data type. In this way             // RadGridView will pick up the best editor according to the data type. For example,             // if the data type of the value is DateTime, you will be editing it with a DatePicker.             // Nice!             ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataType = this.dataMemberType;               // Yet another nice feature. We will transfer the original DataFormatString (if any) to             // the Value column. In this way if you have specified a DataFormatString for the original             // column, you will see all filter values formatted accordingly.             ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataFormatString = column.DataFormatString;               // This is important. Since our little filtersGrid will be bound to the entire collection             // of this.domainDataSource.FilterDescriptors, we need to set a Telerik filter on the             // grid so that it will display FilterDescriptor which are relevane to this column ONLY!             Telerik.Windows.Data.FilterDescriptor columnFilter = new Telerik.Windows.Data.FilterDescriptor("PropertyPath"                 , Telerik.Windows.Data.FilterOperator.IsEqualTo                 , this.dataMemberName);             this.filtersGrid.FilterDescriptors.Add(columnFilter);               // We want to listen for this in order to activate and de-activate the UI funnel.             this.filtersGrid.Items.CollectionChanged += this.OnFilterGridItemsCollectionChanged;         }           /// <summary>         // Since the DomainDataSource is a little bit picky about adding uninitialized FilterDescriptors         // to its collection, we will prepare each new instance with some default values and then         // the user can change them later. Go to the event handler to see how we do this.         /// </summary>         void OnFilterGridAddingNewDataItem(object sender, GridViewAddingNewEventArgs e)         {             // We need to initialize the new instance with some values and let the user go on from here.             System.Windows.Data.FilterDescriptor newFilter = new System.Windows.Data.FilterDescriptor();               // This is a must. It should know what member it is filtering on.             newFilter.PropertyPath = this.dataMemberName;               // Initialize it with one of the allowed operators.             // TypeExtensions.ApplicableFilterOperators method for more info.             newFilter.Operator = this.dataMemberType.ApplicableFilterOperators().First();               if (this.dataMemberType == typeof(DateTime))             {                 newFilter.Value.Value = DateTime.Now;             }             else if (this.dataMemberType == typeof(string))             {                 newFilter.Value.Value = "<enter text>";             }             else if (this.dataMemberType.IsValueType)             {                 // We need something non-null for all value types.                 newFilter.Value.Value = Activator.CreateInstance(this.dataMemberType);             }               // Let the user edit the new filter any way he/she likes.             e.NewObject = newFilter;         }           void OnFilterGridItemsCollectionChanged(object sender, System.Collections.Specialized.NotifyCollectionChangedEventArgs e)         {             // We are active only if we have any filters define. In this case the filtering funnel will lit-up.             this.IsActive = this.filtersGrid.Items.Count > 0;         }           private void OnApplyFiltersButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // Comment this if you want the popup to stay open after the button is clicked.             this.ClosePopup();               // Since this.domainDataSource.AutoLoad is false, this will take into             // account all filtering changes that the user has made since the last             // Load() and pull the new data to the client.             this.DomainDataSource.Load();         }           private void OnClearFiltersButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // We want to remove ONLY those filters from the DomainDataSource             // that this control is responsible for.             this.DomainDataSource.FilterDescriptors                 .Where(fd => fd.PropertyPath == this.dataMemberName) // Only "our" filters.                 .ToList()                 .ForEach(fd => this.DomainDataSource.FilterDescriptors.Remove(fd)); // Bye-bye!               // Comment this if you want the popup to stay open after the button is clicked.             this.ClosePopup();               // After we did our housekeeping, get the new data to the client.             this.DomainDataSource.Load();         }           private void OnAddFilterButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // Let the user enter his/or her requirements for a new filter.             this.filtersGrid.BeginInsert();             this.filtersGrid.UpdateLayout();         }           private void OnRemoveFilterButtonClick(object sender, RoutedEventArgs e)         {             if (this.DomainDataSource.IsLoadingData)             {                 return;             }               // Find the currently selected filter and destroy it.             System.Windows.Data.FilterDescriptor filterToRemove = this.filtersGrid.SelectedItem as System.Windows.Data.FilterDescriptor;             if (filterToRemove != null                 && this.DomainDataSource.FilterDescriptors.Contains(filterToRemove))             {                 this.DomainDataSource.FilterDescriptors.Remove(filterToRemove);             }         }           private void ClosePopup()         {             System.Windows.Controls.Primitives.Popup popup = this.ParentOfType<System.Windows.Controls.Primitives.Popup>();             if (popup != null)             {                 popup.IsOpen = false;             }         }     } }   Finally, we need to tell RadGridViews Columns to use this custom control instead of the default one. Here is how to do it: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Data; using Telerik.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Controls.GridView;   namespace PureServerSideFiltering {     public partial class MainPage : UserControl     {         public MainPage()         {             InitializeComponent();             this.grid.AutoGeneratingColumn += this.OnGridAutoGeneratingColumn;               // Uncomment this if you want the DomainDataSource to start pre-filtered.             // You will notice how our custom filtering controls will correctly read this information,             // populate their UI with the respective filters and lit-up the funnel to indicate that             // filtering is active. Go ahead and try it.             this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("Title", System.Windows.Data.FilterOperator.Contains, "Assistant"));             this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsGreaterThan, new DateTime(1998, 12, 31)));             this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsLessThanOrEqualTo, new DateTime(1999, 12, 31)));               this.employeesDataSource.Load();         }           /// <summary>         /// First of all, we will need to replace the default filtering control         /// of each column with out custom filtering control DomainDataSourceFilteringControl         /// </summary>         private void OnGridAutoGeneratingColumn(object sender, GridViewAutoGeneratingColumnEventArgs e)         {             GridViewBoundColumnBase dataColumn = e.Column as GridViewBoundColumnBase;             if (dataColumn != null)             {                 // We do not like ugly dates.                 if (dataColumn.DataType == typeof(DateTime))                 {                     dataColumn.DataFormatString = "{0:d}"; // Short date pattern.                       // Notice how this format will be later transferred to the Value column                     // of the grid that we have inside the DomainDataSourceFilteringControl.                 }                   // Replace the default filtering control with our.                 dataColumn.FilteringControl = new DomainDataSourceFilteringControl()                 {                     // Let the control know about the DDS, after all it will work directly on it.                     DomainDataSource = this.employeesDataSource                 };                   // Finally, lit-up the filtering funnel through the IsActive dependency property                 // in case there are some filters on the DDS that match our column member.                 string dataMemberName = dataColumn.GetDataMemberName();                 dataColumn.FilteringControl.IsActive =                     this.employeesDataSource.FilterDescriptors                     .Where(fd => fd.PropertyPath == dataMemberName)                     .Count() > 0;             }         }     } } The best part is that we are not only writing filters for the DomainDataSource we can read and load them. If the DomainDataSource has some pre-existing filters (like I have created in the code above), our control will read them and will populate its UI accordingly. Even the filtering funnel will light-up! Remember, the funnel is controlled by the IsActive property of our control. While this is just a basic implementation, the source code is absolutely yours and you can take it from here and extend it to match your specific business requirements. Below the main grid there is another debug grid. With its help you can monitor what filter descriptors are added and removed to the domain data source. Download Source Code. (You will have to have the AdventureWorks sample database installed on the default SQLExpress instance in order to run it.) Enjoy!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• SQL SERVER – SSMS: Memory Usage By Memory Optimized Objects Report

  - by Pinal Dave

  At conferences and at speaking engagements at the local UG, there is one question that keeps on coming which I wish were never asked. The question around, “Why is SQL Server using up all the memory and not releasing even when idle?” Well, the answer can be long and with the release of SQL Server 2014, this got even more complicated. This release of SQL Server 2014 has the option of introducing In-Memory OLTP which is completely new concept and our dependency on memory has increased multifold. In reality, nothing much changes but we have memory optimized objects (Tables and Stored Procedures) additional which are residing completely in memory and improving performance. As a DBA, it is humanly impossible to get a hang of all the innovations and the new features introduced in the next version. So today’s blog is around the report added to SSMS which gives a high level view of this new feature addition. This reports is available only from SQL Server 2014 onwards because the feature was introduced in SQL Server 2014. Earlier versions of SQL Server Management Studio would not show the report in the list. If we try to launch the report on the database which is not having In-Memory File group defined, then we would see the message in report. To demonstrate, I have created new fresh database called MemoryOptimizedDB with no special file group. Here is the query used to identify whether a database has memory-optimized file group or not. SELECT TOP(1) 1 FROM sys.filegroups FG WHERE FG.[type] = 'FX' Once we add filegroup using below command, we would see different version of report. USE [master] GO ALTER DATABASE [MemoryOptimizedDB] ADD FILEGROUP [IMO_FG] CONTAINS MEMORY_OPTIMIZED_DATA GO The report is still empty because we have not defined any Memory Optimized table in the database.  Total allocated size is shown as 0 MB. Now, let’s add the folder location into the filegroup and also created few in-memory tables. We have used the nomenclature of IMO to denote “InMemory Optimized” objects. USE [master] GO ALTER DATABASE [MemoryOptimizedDB] ADD FILE ( NAME = N'MemoryOptimizedDB_IMO', FILENAME = N'E:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\MemoryOptimizedDB_IMO') TO FILEGROUP [IMO_FG] GO You may have to change the path based on your SQL Server configuration. Below is the script to create the table. USE MemoryOptimizedDB GO --Drop table if it already exists. IF OBJECT_ID('dbo.SQLAuthority','U') IS NOT NULL DROP TABLE dbo.SQLAuthority GO CREATE TABLE dbo.SQLAuthority ( ID INT IDENTITY NOT NULL, Name CHAR(500)  COLLATE Latin1_General_100_BIN2 NOT NULL DEFAULT 'Pinal', CONSTRAINT PK_SQLAuthority_ID PRIMARY KEY NONCLUSTERED (ID), INDEX hash_index_sample_memoryoptimizedtable_c2 HASH (Name) WITH (BUCKET_COUNT = 131072) ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_AND_DATA) GO As soon as above script is executed, table and index both are created. If we run the report again, we would see something like below. Notice that table memory is zero but index is using memory. This is due to the fact that hash index needs memory to manage the buckets created. So even if table is empty, index would consume memory. More about the internals of how In-Memory indexes and tables work will be reserved for future posts. Now, use below script to populate the table with 10000 rows INSERT INTO SQLAuthority VALUES (DEFAULT) GO 10000 Here is the same report after inserting 1000 rows into our InMemory table.    There are total three sections in the whole report. Total Memory consumed by In-Memory Objects Pie chart showing memory distribution based on type of consumer – table, index and system. Details of memory usage by each table. The information about all three is taken from one single DMV, sys.dm_db_xtp_table_memory_stats This DMV contains memory usage statistics for both user and system In-Memory tables. If we query the DMV and look at data, we can easily notice that the system tables have negative object IDs.  So, to look at user table memory usage, below is the over-simplified version of query. USE MemoryOptimizedDB GO SELECT OBJECT_NAME(OBJECT_ID), * FROM sys.dm_db_xtp_table_memory_stats WHERE OBJECT_ID > 0 GO This report would help DBA to identify which in-memory object taking lot of memory which can be used as a pointer for designing solution. I am sure in future we will discuss at lengths the whole concept of In-Memory tables in detail over this blog. To read more about In-Memory OLTP, have a look at In-Memory OLTP Series at Balmukund’s Blog. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Memory, SQL Reports

  Read the article

• Azure &ndash; Part 6 &ndash; Blob Storage Service

  - by Shaun

  When migrate your application onto the Azure one of the biggest concern would be the external files. In the original way we understood and ensure which machine and folder our application (website or web service) is located in. So that we can use the MapPath or some other methods to read and write the external files for example the images, text files or the xml files, etc. But things have been changed when we deploy them on Azure. Azure is not a server, or a single machine, it’s a set of virtual server machine running under the Azure OS. And even worse, your application might be moved between thses machines. So it’s impossible to read or write the external files on Azure. In order to resolve this issue the Windows Azure provides another storage serviec – Blob, for us. Different to the table service, the blob serivce is to be used to store text and binary data rather than the structured data. It provides two types of blobs: Block Blobs and Page Blobs. Block Blobs are optimized for streaming. They are comprised of blocks, each of which is identified by a block ID and each block can be a maximum of 4 MB in size. Page Blobs are are optimized for random read/write operations and provide the ability to write to a range of bytes in a blob. They are a collection of pages. The maximum size for a page blob is 1 TB.   In the managed library the Azure SDK allows us to communicate with the blobs through these classes CloudBlobClient, CloudBlobContainer, CloudBlockBlob and the CloudPageBlob. Similar with the table service managed library, the CloudBlobClient allows us to reach the blob service by passing our storage account information and also responsible for creating the blob container is not exist. Then from the CloudBlobContainer we can save or load the block blobs and page blobs into the CloudBlockBlob and the CloudPageBlob classes.   Let’s improve our exmaple in the previous posts – add a service method allows the user to upload the logo image. In the server side I created a method name UploadLogo with 2 parameters: email and image. Then I created the storage account from the config file. I also add the validation to ensure that the email passed in is valid. 1: var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); 2: var accountContext = new DynamicDataContext<Account>(storageAccount); 3:  4: // validation 5: var accountNumber = accountContext.Load() 6: .Where(a => a.Email == email) 7: .ToList() 8: .Count; 9: if (accountNumber <= 0) 10: { 11: throw new ApplicationException(string.Format("Cannot find the account with the email {0}.", email)); 12: } Then there are three steps for saving the image into the blob service. First alike the table service I created the container with a unique name and create it if it’s not exist. 1: // create the blob container for account logos if not exist 2: CloudBlobClient blobStorage = storageAccount.CreateCloudBlobClient(); 3: CloudBlobContainer container = blobStorage.GetContainerReference("account-logo"); 4: container.CreateIfNotExist(); Then, since in this example I will just send the blob access URL back to the client so I need to open the read permission on that container. 1: // configure blob container for public access 2: BlobContainerPermissions permissions = container.GetPermissions(); 3: permissions.PublicAccess = BlobContainerPublicAccessType.Container; 4: container.SetPermissions(permissions); And at the end I combine the blob resource name from the input file name and Guid, and then save it to the block blob by using the UploadByteArray method. Finally I returned the URL of this blob back to the client side. 1: // save the blob into the blob service 2: string uniqueBlobName = string.Format("{0}_{1}.jpg", email, Guid.NewGuid().ToString()); 3: CloudBlockBlob blob = container.GetBlockBlobReference(uniqueBlobName); 4: blob.UploadByteArray(image); 5:  6: return blob.Uri.ToString(); Let’s update a bit on the client side application and see the result. Here I just use my simple console application to let the user input the email and the file name of the image. If it’s OK it will show the URL of the blob on the server side so that we can see it through the web browser. Then we can see the logo I’ve just uploaded through the URL here. You may notice that the blob URL was based on the container name and the blob unique name. In the document of the Azure SDK there’s a page for the rule of naming them, but I think the simple rule would be – they must be valid as an URL address. So that you cannot name the container with dot or slash as it will break the ADO.Data Service routing rule. For exmaple if you named the blob container as Account.Logo then it will throw an exception says 400 Bad Request.   Summary In this short entity I covered the simple usage of the blob service to save the images onto Azure. Since the Azure platform does not support the file system we have to migrate our code for reading/writing files to the blob service before deploy it to Azure. In order to reducing this effort Microsoft provided a new approch named Drive, which allows us read and write the NTFS files just likes what we did before. It’s built up on the blob serivce but more properly for files accessing. I will discuss more about it in the next post.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Top 4 Lame Tech Blogging Posts

  - by jkauffman

  From a consumption point of view, tech blogging is a great resource for one-off articles on niche subjects. If you spend any time reading tech blogs, you may find yourself running into several common, useless types of posts tech bloggers slip into. Some of these lame posts may just be natural due to common nerd psychology, and some others are probably due to lame, lemming-like laziness. I’m sure I’ll do my fair share of fitting the mold, but I quickly get bored when I happen upon posts that hit these patterns without any real purpose or personal touches. 1. The Content Regurgitation Posts This is a common pattern fueled by the starving pan-handlers in the web traffic economy. These are posts that are terse opinions or addendums to an existing post. I commonly see these involve huge block quotes from the linked article which almost always produces over 50% of the post itself. I’ve accidentally gone to these posts when I’m knowingly only interested in the source material. Web links can degrade as well, so if the source link is broken, then, well, I’m pretty steamed. I see this occur with simple opinions on technologies, Stack Overflow solutions, or various tech news like posts from Microsoft. It’s not uncommon to go to the linked article and see the author announce that he “added a blog post” as a response or summary of the topic. This is just rude, but those who do it are probably aware of this. It’s a matter of winning that sweet, juicy web traffic. I doubt this leeching is fooling anybody these days. I would like to rally human dignity and urge people to avoid these types of posts, and just leave a comment on the source material. 2. The “Sorry I Haven’t Posted In A While” Posts This one is far too common. You’ll most likely see this quote somewhere in the body of the offending post: I have been really busy. If the poster is especially guilt-ridden, you’ll see a few volleys of excuses. Here are some common reasons I’ve seen, which I’ll list from least to most painfully awkward. Out of town Vague allusions to personal health problems (these typically includes phrases like “sick”, “treatment'”, and “all better now!”) “Personal issues” (which I usually read as "divorce”) Graphic or specific personal health problems (maximum awkwardness potential is achieved if you see links to charity fund websites) I can’t help but to try over-analyzing why this occurs. Personally, I see this an an amalgamation of three plain factors: Life happens Us nerds are duty-driven, and driven to guilt at personal inefficiencies Tech blogs can become personal journals I don’t think we can do much about the first two, but on the third I think we could certainly contain our urges. I’m a pretty boring guy and, whether or I like it or not, I have an unspoken duty to protect the world from hearing about my unremarkable existence. Nobody cares what kind of sandwich I’m eating. Similarly, if I disappear for a while, it’s unlikely that anybody who happens upon my blog would care why. Rest assured, if I stop posting for a while due to a vasectomy, you will be the first to know. 3. The “At A Conference”, or “Conference Review” Posts I don’t know if I’m like everyone else on this one, but I have never been successfully interested in these posts. It even sounds like a good idea: if I can’t make it to a particular conference (like the KCDC this year), wouldn’t I be interested in a concentrated summary of events? Apparently, no! Within this realm, I’ve never read a post by a blogger that held my interest. What really baffles is is that, for whatever reason, I am genuinely engaged and interested when talking to someone in person regarding the same topic. I have noticed the same phenomenon when hearing about others’ vacations. If someone sends me an email about their vacation, I gloss over it and forget about it quickly. In contrast, if I’m speaking to that individual in person about their vacation, I’m actually interested. I’m unsure why the written medium eradicates the intrigue. I was raised by a roaming pack of friendly wild video games, so that may be a factor. 4. The “Top X Number of Y’s That Z” Posts I’ve seen this one crop up a lot more in the past few of years. Here are some fabricated examples: 5 Easy Ways to Improve Your Code Top 7 Good Habits Programmers Learn From Experience The 8 Things to Consider When Giving Estimates Top 4 Lame Tech Blogging Posts These are attention-grabbing headlines, and I’d assume they rack up hits. In fact, I enjoy a good number of these. But, I’ve been drawn to articles like this just to find an endless list of identically formatted posts on the blog’s archive sidebar. Often times these posts have overlapping topics, too. These types of posts give the impression that the author has given thought to prioritize and organize the points as a result of a comprehensive consideration of a particular topic. Did the author really weigh all the possibilities when identifying the “Top 4 Lame Tech Blogging Patterns”? Unfortunately, probably not. What a tool. To reiterate, I still enjoy the format, but I feel it is abused. Nowadays, I’m pretty skeptical when approaching posts in this format. If these trends continue, my brain will filter these blog posts out just as effectively as it ignores the encroaching “do xxx with this one trick” advertisements. Conclusion To active blog readers, I hope my guide has served you precious time in being able to identify lame blog posts at a glance. Save time and energy by skipping over the chaff of the internet! And if you author a blog, perhaps my insight will help you to avoid the occasional urge to produce these needless filler posts.

  Read the article

• SQLAuthority News – Community Tech Days – A SQL Legends in Ahmedabad – December 11, 2010

  - by pinaldave

  Ahmedabad is going to be fortunate city again on December 11. We are going to have SQL Server Legends present at the prestigious event of Community Tech Days in Ahmedabad. The venue details are as following: H K Hall, H K College Campus, Near Handloom House, Opp. Natraj Cinema, Ashram Road, Ahmedabad – 380009 Click here to Registration for the event. Agenda of the event is as following. 10:15am – 10:30am     Welcome – Pinal Dave 10:30am – 11:15am     SQL Tips and Tricks for .NET Developers by Jacob Sebastian 11:15am – 11:30am     Tea Break 11:30am – 12:15pm     Best Database Practice for SharePoint Server by Pinal Dave 12:15pm – 01:00pm     Self Service Business Intelligence by Rushabh Mehta 01:00pm – 02:00pm     Lunch 02:00pm – 02:45pm     Managing your future, Managing your time by Vinod Kumar 02:45pm – 03:30pm     Windows Azure News and Introducing Storage Services by Mahesh Devjibhai Dhola 03:30pm – 03:45pm     Tea Break 03:45pm – 04:30pm     Improve Silverlight application with Threads and MEF by Prabhjot Singh Bakshi 04:30pm – 04:45pm     Thank you – Mahesh Devjibhai Dhola Ahmedabad considers itself extremely fortunate when there are SQL Legends presenting on various subjects in front of community. Here is brief introduction about them in my own words. (Their names are in order of the agenda). 1) Jacob Sebastian (SQL Server MVP) – This person needs no introduction. Every developer and programmer in Ahmedabad and India knows him. He is the one man who is founder of various community-related ideas like SQL Challenges, SQL Quiz and BeyondRelational. He works with me on all the community-related activities; we are extremely good friends. 2) Rushabh Mehta (SQL Server MVP) – If you use SQL Server – you know this man. He is the President of SQL Server of Professional Association (PASS) and one of the leading Business Intelligence (BI) Experts renowned in the world. He has blessed Ahmedabad once before and now doing once again this year. 3) Vinod Kumar (Microsoft Evangelist – SQL Server & BI) – Ahmedabad remembers him very well. During his last visit to Ahmedabad, a fight had almost broke outside the hall amidst the rush to listen him. There were more people standing and listening to him than those who were seated. This is one man Ahmedabad will never forget. 4) and Myself. I will not rate myself in the league of abovementioned experts, but I must say that I am fortunate to have friends like those above. We also have two strong .NET presenters – Mahesh and Prabhjot. During this event, there will be plenty of giveaways, lots of fun, demos and pure technical talk, specifically no marketing and promotion – just pure technical talk. The most interesting part is that all the SQL Legends – Jacob, Rushabh and Vinod are for sure presenting on SQL Server but with a twist. Jacob – He is going to talk about .NET and SQL – Optimization Techniques Rushabh – He is going to talk about SQL and BI – Self Service BI Vinod – He is going to talk about professional development of developers – Managing Time Pinal – Best Practices for SharePoint Database Administrators – SharePoint DBA – I have presented this session earlier. I promise this event is going to be one of the best events held ever. You can read about the earlier event over here. ?Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

  - by Brian Jackett

  This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

  Read the article

• Using the “Settings.settings” functionalities in VB.NET can be tricky…

  - by Vincent Grondin

  Sometime you’re searching for something forever and when you find it, you realize it was right under your nose.  Maybe you were distracted by other things around… or maybe that thing right under your nose was so well hidden that it deserves a blog post…   That happened to me a few days ago while using the “Settings.settings” functionalities in my VB.NET application…  I thought it was a cool feature and I decided to use it…  So there I am adding new settings with “USER” scope and StringCollection as the data type, testing my application and everything works perfectly fine...  That was before I decided to modify the “Value” of one of my settings…  After changing the value of one of my settings, I start my application again and, to my surprise, my new values aren’t showing!  Hmmm… That’s odd…  My setting was a pretty long list of strings so I was rather angry at myself for not saving my work after I was done…  So I open up the Settings.setting in the designer and click the ellipsis symbol to enter my string collection again, but to my great pleasure (and disbelief) my strings are there!!!  Alright, you rock VB.NET!  You’ve just save me a bunch of typing time and I’m thinking it’s just a simple Visual Studio glitch…  I hit “Save” then “Save All” (just in case) and finally I rebuild everything and fire up my app once again.  Huh?  Where are my darn strings????????  Ok there’s a bug there…  I open up the app.config and my new strings are there!!!  Alright, let’s recap…  My new strings are in the app.config, they show correctly in the Settings.settings designer UI but they aren’t showing at runtime…  Hmmmm?  Let’s try something else…  Let’s start the application but outside Visual Studio this time… I fire up the exe and BAM!  My strings where there!  I “alt-tab” and hit “F5” and BOOM, no strings!  So it’s a bug in the Visual Studio environment… or could it be a FEATURE?  I must admit that I’m a little confused over what’s a bug and what’s a feature in Visual Studio… lol!   Finally I found out there’s a “cache” for your Visual Studio located here:  C:\Users\<your username>\AppData\Local\Microsoft\<your app name and a very weird temp ID>\<your app version>\user.config When using the “Settings.settings” with a setting of scope “user”, this file is out of sync with your app.config until you manually decide to update it… The button is right there… under your nose… at the top left corner of your screen in the settings designer…  See the big “Synchronize” button there?  Yep…  Now that’s user friendly isn’t it?  Oh, and wait until you see what it does when you click it…  It prompts you and basically says:  “Would you like your settings to start working inside Visual Studio now that you found out that I exist?” and of course the right answer is yes… or rather “OK”…  Unfortunately, you have to do this every time you edit a value… On the other hand, adding and removing settings seem to work flawlessly without having to click this magical button… go figure!  Oh and I almost forgot… this great “feature” is only available for VB.NET…  A project in C# using Settings.settings will work perfectly EVEN when editing values… Here’s a screenshot that shows this important button: Button Using other data types appears to work perfectly well…   Maybe it’s simply related to the StringCollection data type?  If you are a VB.NET programmer, you should pay attention to this when you plan on using the settings functionalities and your scope is “user” and your data type is StringCollection… Happy coding all!

  Read the article

• Why Software Sucks...and What You Can Do About It – book review

  - by DigiMortal

      How do our users see the products we are writing for them and how happy they are with our work? Are they able to get their work done without fighting with cool features and crashes or are they just switching off resistance part of their brain to survive our software? Yeah, the overall picture of software usability landscape is not very nice. Okay, it is not even nice. But, fortunately, Why Software Sucks...and What You Can Do About It by David S. Platt explains everything. Why Software Sucks… is book for software users but I consider it as a-must reading also for developers and specially for their managers whose politics often kills all usability topics as soon as they may appear. For managers usability is soft topic that can be manipulated the way it is best in current state of project. Although developers are not UI designers and usability experts they are still very often forced to deal with these topics and this is how usability problems start (of course, also designers are able to produce designs that are stupid and too hard to use for users, but this blog here is about development). I found this book to be very interesting and funny reading. It is not humor book but it explains you all so you remember later very well what you just read. It took me about three evenings to go through this book and I am still enjoying what I found and how author explains our weird young working field to end users. I suggest this book to all developers – while you are demanding your management to hire or outsource usability expert you are at least causing less pain to end users. So, go and buy this book, just like I did. And… they thanks to mr. Platt :) There is one book more I suggest you to read if you are interested in usability - Don't Make Me Think: A Common Sense Approach to Web Usability, 2nd Edition by Steve Krug. Editorial review from Amazon Today’s software sucks. There’s no other good way to say it. It’s unsafe, allowing criminal programs to creep through the Internet wires into our very bedrooms. It’s unreliable, crashing when we need it most, wiping out hours or days of work with no way to get it back. And it’s hard to use, requiring large amounts of head-banging to figure out the simplest operations. It’s no secret that software sucks. You know that from personal experience, whether you use computers for work or personal tasks. In this book, programming insider David Platt explains why that’s the case and, more importantly, why it doesn’t have to be that way. And he explains it in plain, jargon-free English that’s a joy to read, using real-world examples with which you’re already familiar. In the end, he suggests what you, as a typical user, without a technical background, can do about this sad state of our software—how you, as an informed consumer, don’t have to take the abuse that bad software dishes out. As you might expect from the book’s title, Dave’s expose is laced with humor—sometimes outrageous, but always dead on. You’ll laugh out loud as you recall incidents with your own software that made you cry. You’ll slap your thigh with the same hand that so often pounded your computer desk and wished it was a bad programmer’s face. But Dave hasn’t written this book just for laughs. He’s written it to give long-overdue voice to your own discovery—that software does, indeed, suck, but it shouldn’t. Table of contents Acknowledgments xiii Introduction Chapter 1: Who’re You Calling a Dummy? Where We Came From Why It Still Sucks Today Control versus Ease of Use I Don’t Care How Your Program Works A Bad Feature and a Good One Stopping the Proceedings with Idiocy Testing on Live Animals Where We Are and What You Can Do Chapter 2: Tangled in the Web Where We Came From How It Works Why It Still Sucks Today Client-Centered Design versus Server-Centered Design Where’s My Eye Opener? It’s Obvious—Not! Splash, Flash, and Animation Testing on Live Animals What You Can Do about It Chapter 3: Keep Me Safe The Way It Was Why It Sucks Today What Programmers Need to Know, but Don’t A Human Operation Budgeting for Hassles Users Are Lazy Social Engineering Last Word on Security What You Can Do Chapter 4: Who the Heck Are You? Where We Came From Why It Still Sucks Today Incompatible Requirements OK, So Now What? Chapter 5: Who’re You Looking At? Yes, They Know You Why It Sucks More Than Ever Today Users Don’t Know Where the Risks Are What They Know First Milk You with Cookies? Privacy Policy Nonsense Covering Your Tracks The Google Conundrum Solution Chapter 6: Ten Thousand Geeks, Crazed on Jolt Cola See Them in Their Native Habitat All These Geeks Who Speaks, and When, and about What Selling It The Next Generation of Geeks—Passing It On Chapter 7: Who Are These Crazy Bastards Anyway? Homo Logicus Testosterone Poisoning Control and Contentment Making Models Geeks and Jocks Jargon Brains and Constraints Seven Habits of Geeks Chapter 8: Microsoft: Can’t Live With ’Em and Can’t Live Without ’Em They Run the World Me and Them Where We Came From Why It Sucks Today Damned if You Do, Damned if You Don’t We Love to Hate Them Plus ça Change Growing-Up Pains What You Can Do about It The Last Word Chapter 9: Doing Something About It 1. Buy 2. Tell 3. Ridicule 4. Trust 5. Organize Epilogue About the Author

  Read the article

< Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699  | Next Page >