Search Results

Search found 20289 results on 812 pages for 'service locator'.

Page 692/812 | < Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699  | Next Page >

• Cannot browse remote networks even with WINS configured

  - by paradroid

  As the NetBIOS protocol acts on Layer 2 and so is not routable, In order to enable network browsing of remote networks, WINS has been installed and configured on two domain controllers, both of which are on different networks. The WINS servers seem to be replicating with eachother, and each has 127.0.0.1 set as the Primary WINS Server in each of their LAN interface properties, with nothing entered for Secondary WINS Server. The DC which holds the PDC Emulator FSMO role has the Computer Browser service running and set to Auto start, and it has the WINS/NBT node type network setting at 0x8 (H-node - Hybrid node). Remote network browsing does not work. Is the WINS/NBT node type correct for this scenario? The reason why I think it may not be the right one is because I set the DHCP Server's 046 WINS/NBT node type option to 0x8 as well, after which the DHCP clients started to disappear from the Network folders. When that option is not set, does it default to B-node (Broadcast node)? Or could it be a problem with the WINS servers setup?

  Read the article

• Which DNS settings are used when setting up your server

  - by Saif Bechan

  I have a server and want to run my own name server service. Now I have set it up already and it works not, but I do not know where the exact settings are stored. On my server I use Plesk. When I edit DNS settings there I think it is stored in named.conf. Named is installed on the server, and BIND. Now I also have a panel from my registrar. This is separate from my server. Both places I can add the normal MX,A,CNAME, etc records. Now where is the best way to place this settings. Currently I have the same records on both places, on the server and at the registrar panel. I am correct to just add all the records at the registrar panel, and remove everything from within PLESK, and just don't run DNS on my server, because it is already done in the registrar panel. Or should I add the records in both places.

  Read the article

• Prevent outgoing traffic unless OpenVPN connection is active using pf.conf on Mac OS X

  - by Nick

  I've been able to deny all connections to external networks unless my OpenVPN connection is active using pf.conf. However, I lose Wi-Fi connectivity if the connection is broken by closing and opening the laptop lid or toggling Wi-Fi off and on again. I'm on Mac OS 10.8.1. I connect to the Web via Wi-Fi (from varying locations, including Internet cafés). The OpenVPN connection is set up with Viscosity. I have the following packet filter rules set up in /etc/pf.conf # Deny all packets unless they pass through the OpenVPN connection wifi=en1 vpn=tun0 block all set skip on lo pass on $wifi proto udp to [OpenVPN server IP address] port 443 pass on $vpn I start the packet filter service with sudo pfctl -e and load the new rules with sudo pfctl -f /etc/pf.conf. I have also edited /System/Library/LaunchDaemons/com.apple.pfctl.plist and changed the line <string>-f</string> to read <string>-ef</string> so that the packet filter launches at system startup. This all seems to works great at first: applications can only connect to the web if the OpenVPN connection is active, so I'm never leaking data over an insecure connection. But, if I close and reopen my laptop lid or turn Wi-Fi off and on again, the Wi-Fi connection is lost, and I see an exclamation mark in the Wi-Fi icon in the status bar. Clicking the Wi-Fi icon shows an "Alert: No Internet connection" message: To regain the connection, I have to disconnect and reconnect Wi-Fi, sometimes five or six times, before the "Alert: No Internet connection" message disappears and I'm able to open the VPN connection again. Other times, the Wi-Fi alert disappears of its own accord, the exclamation mark clears, and I'm able to connect again. Either way, it can take five minutes or more to get a connection again, which can be frustrating. Why does Wi-Fi report "No internet connection" after losing connectivity, and how can I diagnose this issue and fix it?

  Read the article

• How to schedule automatic (daily) snapshots of AWS EC2 Windows Instance?

  - by Stanley

  I have some Windows servers hosted on Amazon EC2. Some run Windows Server 2003 and other run Windows Server 2008. These are EBS-backed instances. Most of the instances also have some additional EBS-volumes attached. We want to schedule a daily snapshot of the windows machines (and also the attached EBS-volumes) to S3 so that we have daily backups available. One would think that this is a very common requirement and would be made available via the AWS Management Console, but alas, it is not. What approaches are available? How do I schedule daily snapshots on our Windows Servers? There are several scripting examples available online for Linux, but not so much for windows. I have had a look at http://sehmer.blogspot.com/2011/04/amazon-ec2-daily-snapshot-script-for.html as well as https://github.com/ronmichael/aws-snapshot-scheduler. Has anyone used one of these approaches and does it work? I have also considered a service like Skeddly which seems inexpensive at first glance but when you look at using it for several servers the price soon escalates to such a point where it seems a better option to create your own solution as you can then apply it to new servers in the future. With Skeddly we'll pay for each server. How do we schedule daily snapshots of our windows instances?

  Read the article

• How to fake ip at localhost without LoopBack.

  - by sexer

  How can i fake an ip on my own PC? for example if there were an ip address lets say 201.91.81.71, that Host is somewhere outside of my red and is hosting a webserver. How can set a website on my own PC, and when i go to browser and try to explore 201.91.81.71 it actually explore the website at my own PC? pd: I need it with IP addresses not domain names, since I need to implement it on a non-web service. First guess was installing a LoopBack with 201.191.81.71 as ip, but since some times the subnet works and some other it doesn't isn't a stable solution. Second guess was adding a route to route table : route add 201.91.81.71 mask 255.255.255.255 192.168.1.2 192.168.1.2 is the ip address of my NIC. If i could add this route it would work but windows doesn't let me do so. route add 201.91.81.71 mask 255.255.255.255 127.0.0.1 it doesn't let me set as gateway 127.0.0.1 if 201.91.81.71 isn't set in a NIC, so thats why i set sometimes loopback and this route add is auto, but it needs a subnet mask which doesn't match the ip and cannot set 255.255.255.255, im in real throubles here. can i get some help? thx.

  Read the article

• APC uptime 0 because of Fast

  - by demlasjr

  I have a VPS using Parallels/Plesk (11.0.9 Update #22, last updated at Oct 31, 2012 03:33 AM CentOS 6.3 (Final) x86_64) I have apache (CGI/FastCGI) installed and nginx as reverse proxy. Everything is working just fine. I installed APC for caching, but the issue is that the uptime is 0 always. It's restarting each 15 seconds or so. I checked everywhere and can't find a solution to fix it. The server have the grace restart enabled, but every 6 hours, which shouldn't influence the APC uptime. Searching in Google I found that this could be related to Apache, running with FCGId instead of FastCGI. Plesk/Apache is using this config file: usr/local/psa/admin/conf/templates/default/service/php_over_fastcgi.php which content is: <IfModule mod_fcgid.c> <Files ~ (\.php)> SetHandler fcgid-script FCGIWrapper <?php echo $VAR->server->webserver->apache->phpCgiBin ?> .p$ Options +ExecCGI allow from all </Files> Is here the issue or elsewhere ? How can I fix this to work with FastCGI and make APC working properly. I forgot to specify that even if the uptime is below one minute, APC is doing pretty good job caching (92% are hits).

  Read the article

• How to find the cause of locked user account in Windows AD domain

  - by Stephane

  After a recent incident with Outlook, I was wondering how I would most efficiently resolve the following problem: Assume a fairly typical small to medium sized AD infrastructure: several DCs, a number of internal servers and windows clients, several services using AD and LDAP for user authentication from within the DMZ (SMTP relay, VPN, Citrix, etc.) and several internal services all relying on AD for authentication (Exchange, SQL server, file and print servers, terminal services servers). You have full access to all systems but they are a bit too numerous (counting the clients) to check individually. Now assume that, for some unknown reason, one (or more) user account gets locked out due to password lockout policy every few minutes. What would be the best way to find the service/machine responsible for this ? Assuming the infrastructure is pure, standard Windows with no additional management tool and few changes from default is there any way the process of finding the cause of such lockout could be accelerated or improved ? What could be done to improve the resilient of the system against such an account lockout DOS ? Disabling account lockout is an obvious answer but then you run into the issue of users having way to easily exploitable passwords, even with complexity enforced.

  Read the article

• Creating Active Directory on an EC2 box

  - by Chiggins

  So I have Active Directory set up on a Windows Server 2008 Amazon EC2 server. Its set up correctly I think, I never got any errors with it. Just to test that I got it all set up correctly, I have a Windows 7 Professional virtual machine set up on my network to join to AD. I set the VM to use the Active Directory box as its DNS server. I type in my domain to join it, but I get the following error: DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "ad.win.chigs.me": The query was for the SRV record for _ldap._tcp.dc._msdcs.ad.win.chigs.me The following domain controllers were identified by the query: ip-0af92ac4.ad.win.chigs.me However no domain controllers could be contacted. Common causes of this error include: - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses. - Domain controllers registered in DNS are not connected to the network or are not running. It seems that I can talk to Active Directory, but when I'm trying to contact the Domain Controller, its giving a private IP to connect to, at least thats what I can make out of it. Here are some nslookup results. > win.chigs.me Server: ec2-184-73-35-150.compute-1.amazonaws.com Address: 184.73.35.150 Non-authoritative answer: Name: ec2-184-73-35-150.compute-1.amazonaws.com Address: 10.249.42.196 Aliases: win.chigs.me > ad.win.chigs.me Server: ec2-184-73-35-150.compute-1.amazonaws.com Address: 184.73.35.150 Name: ad.win.chigs.me Address: 10.249.42.196 win.chigs.me and ad.win.chigs.me are CNAME's pointing to my EC2 box. Any idea what I need to do so that I can join my virtual machine to the EC2 Active Directory set up I have? Thanks!

  Read the article

• Allow incoming connections on Windows Server 2008 R2

  - by Richard-MX

  Good day people. First, im new to Windows Server. I've always used Linux/Apache combo, but, my client has and AWS EC2 Windows Server 2008 R2 instance and he wants everything in there. Im working with IIS and PHP enabled as Fast-CGI and everything is working, but, i cant see the websites stored in it from internet. The public DNS that AWS gave us for that instance is: http://ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com/ But, if i copy paste that address, i get nothing, no IIS logo or something like that. My common sense tells me that maybe the firewall could be blocking the access. Can anyone help me and tell where to enable some rules to get this thing working? I don't wanna start enabling rules at random and make the system insecure. If you need any additional info, you can ask me and i will provide it. Thanks in advance. UPDATE: Amazon EC2 display this: Public DNS: ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com Private DNS: ip-XX-XXX-XX-252.us-west-2.compute.internal Private IPs: XX.XXX.XX.25 In my test microinstance, i just to use the Public DNS address (the one that starts with "ec2") and it works like a charm (of course, the micro instance have its own Public DNS im not assuming same address for both instances...) However, for the large instance, i tried to do the same. Set up everything as in the micro instance but if i use the Public DNS, it doesnt load anything. Im suspicious about the Windows Firewall, but, the HTTP related stuff is enabled. What should i do to get access to the large instance? I don't want to set up the domain yet, i want access from an amazon url. 2ND EDIT: all fixed. Charles pointed that maybe Security Groups was not properly set up for the instance. He was right. Just added HTTP service to the rules and all works good.

  Read the article

• Being a more attractive job candidate - Certs XOR Degree

  - by Zephyr Pellerin

  I'm currently working in an IT position, where I do helpdesk stuff, and predominantly security related issues/consulting (In the loosest sense of the term) In-House and for Service-Contract clients (as the only/acting CCSP [I guess I should say only person with Cisco experience] in my organization). I've professionally written Kernel Mode drivers for a gaming company. Among other things that I'm proud to put on a resume. I think of myself as very reasonably qualified as a System Administrator, With excellent Cisco experience, among other things I think would make a good addition to almost any IT staff in need of a new employee. However, Something has always tripped me up - Human Resources. Let me explain, I decided to skip the university route - I'm immensely glad that I did, The computer science graduates that I've met and work with rarely know much of anything about Computers (Until they gain some 'real' experience), Even when asked about Theoretical Computing fundamentals they can rattle something off about Turing Completeness but rarely do they understand the mathematical underpinnings. In short, I think instead of going to college, I'd rather pick up some real world experience. However, Apparently, Employers rarely think the same way. A quick perusal of jobs through the standard job search engine yields nothing short of a conspiracy to exclude anyone without 'A Bachelors Degree in Computer Science or Equivalent'. Interviews I've had in the past have almost always been entangled with - 1. My Age (Which I can't really change) and 2. Lack of Degree. Employers frequently disregard the CCNA/CCSP, The experience I've gained through internships, My extensive experience in x86 assembly and C, among so many other things I like to think are valuable to employers - In lieu of the fact that I don't have a piece of paper. So, AS AN EMPLOYER - Is it even worth working on my CCIE? Or should I pad my resume with certifications that are easier to acquire (Like CISSP, MSCE, Network+, etc.). Or should I ditch the whole idea and head back to get a Mathematics or CS degree?

  Read the article

• Multiple threads stuck on Tomcat behind Apache mod_proxy

  - by Eddy

  we just took a break at butting our collective heads against this maddening problem we're having. Basically this brand new deployment of Tomcat 6.0.36 crawls down to a halt every couple minutes with many of the worker threads stuck as in the example snippet; only after a while the server gets "unstuck" for another couple minutes. The previous Tomcat works a charm though, but keeping it is not really an option... On netstat, we also see a lot of FIN_WAIT and FIN2_WAIT. "catalina-exec-25" daemon prio=10 tid=0x000000004f9d4000 nid=0x7459 runnable [0x0000000044567000] java.lang.Thread.State: RUNNABLE at java.net.SocketOutputStream.socketWrite0(Native Method) at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92) at java.net.SocketOutputStream.write(SocketOutputStream.java:136) at org.apache.coyote.http11.InternalOutputBuffer.realWriteBytes(InternalOutputBuffer.java:756) at org.apache.tomcat.util.buf.ByteChunk.flushBuffer(ByteChunk.java:448) at org.apache.tomcat.util.buf.ByteChunk.append(ByteChunk.java:363) at org.apache.coyote.http11.InternalOutputBuffer$OutputStreamOutputBuffer.doWrite(InternalOutputBuffer.java:780) at org.apache.coyote.http11.filters.IdentityOutputFilter.doWrite(IdentityOutputFilter.java:118) at org.apache.coyote.http11.InternalOutputBuffer.doWrite(InternalOutputBuffer.java:593) at org.apache.coyote.Response.doWrite(Response.java:560) at org.apache.catalina.connector.OutputBuffer.realWriteBytes(OutputBuffer.java:364) at org.apache.tomcat.util.buf.ByteChunk.flushBuffer(ByteChunk.java:448) at org.apache.catalina.connector.OutputBuffer.doFlush(OutputBuffer.java:318) at org.apache.catalina.connector.OutputBuffer.close(OutputBuffer.java:274) at org.apache.catalina.connector.Response.finishResponse(Response.java:493) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:317) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:861) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:606) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:396) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) Any idea? Eddy

  Read the article

• Securing SSH/SFTP and best practices on security

  - by MultiformeIngegno

  I'm on a fresh VPS with Ubuntu Server 12.04. I wanted to ask you the good practices to apply to enhance security over a stock Ubuntu-server. This is what I did up to now: I added Google Authenticator to SSH, then I created a new user (whom I'll use instead of 'root' for SSH & SFTP access) which I added to my /etc/sudoers list below 'root', so now it's: # User privilege specification root ALL=(ALL:ALL) ALL new_user ALL=(ALL:ALL) ALL Then I edited sshd_config and set PermitRootLogin to 'no'. Then restarted the ssh service. Is this ok? There are a few things I'd like to ask you though: 1) What's the sense of adding a new (sudoer) user whilst the root user still exist (ok it can't access with root privilege but it's still there..)? 2) System files are owned by 'root'.. I want to use my new_user to access via SFTP but with it I can't edit those files!! Should I mass-CHMOD 'em so that new_user has write perms too? What's the good practice on this? Thanks in advance, I hope you'll tell me if I did something wrong and/or other ways to secure the system. :)

  Read the article

• BSOD: PFN_LIST_CORRUPT and IRQ_NOT_LESS_OR_EQUAL

  - by David Lively

  I built a desktop about a year ago that has, until a few weeks ago, been running without a hitch using Windows 7 Ultimate. Recently, the PC started occasionally rebooting with a blue screen indicating a "PFN_LIST_CORRUPT" error. Also, I've seen at least once the error IRQ_NOT_LESS_OR_EQUAL. I seem to remember temporarily connecting an internal DVD burner about the same time this happened. I burned a DVD for another machine and promptly removed the drive. Yesterday, I reformatted the drive and installed Win7 Ultimate x64. During the first install, the PFN_LIST_CORRUPT bluescreen reared its ugly head again. A second install attempt completed with no errors. The fact that this error happened during a clean install leads me to believe that this is not a driver or OS issue. I also ran the memory diagnostic from the Win7 32-bit install DVD. It completed both passes with no errors. Periodically, the screen will flicker, as if explorer or the video are resetting. In the event log, I see a series of 8 or so errors indicating that some services unexpectedly stopped, and were apparently reset. These include an HID service and some others (I don't have a list in front of me). The PC is a Phenom X2 3 Ghz with a 500GB Seagate drive, 4GB of Corsair XMS2 cm2x2048-6400c5c. Anyone know what would suddenly cause a couple of sticks of RAM to go bad?

  Read the article

• Certain Japanese characters aren't displayed properly

  - by Nisto

  On the following site: http://www.nciku.com/search/radical the first 2 characters on the second row of the "Step 2" table aren't displayed properly. All other characters look fine. I tried re-installing the Asian fonts via the checkboxes regarding Asian fonts in the "Regional and Language Options" control panel applet. I have tried removing every single Font from the Fonts folder (some were ofcourse not possible to remove), and re-installing them all again. I did this by... Running cmd Closing down the explorer process In cmd; using the command DEL /F /S /Q * in the Fonts folder Putting in my XP SP3 Retail disc In cmd; using expand -r *.tt_ in the I386 folder on the XP disc (and any other font file, in the I386\LANG folder) I also tried installing this pack from Microsoft, but this solved nothing either. I even tried running my browser (Firefox) through AppLocale. And changing character encoding -- again, does not help. I've also tried viewing the page in Internet Explorer. What could be wrong? I have checked my Fonts folder, to make sure that every single font available on the XP disc is available in WINDOWS\Fonts. What shows in the first square on the second row - I can't really tell what it's supposed to look like (but it's not the proper character)... but the second square shows a rectangular symbol containing HEX code. I've been in this situation before -- and it has been when I've been missing fonts. But how could I possibly be missing a necessary font? Shouldn't it be provided in the Asian "font packages"? I've talked to some other users that has viewed the page, and they had no problems displaying those characters on second row - even though they're only using the fonts provided on the Windows installation disc. Windows XP Professional Service Pack 3 (x86 - with latest updates) Firefox 3.6.15

  Read the article

• OpenVZ Can't initialize containers after install

  - by Tonino Jankov

  I have installed OpenVZ on centos 6 on a dedicated server. I followed quick installation guide on openvz wiki. After installing thru yum, I don't know why, but grub.conf wasn't automatically updated to accomodate new kernel, so I had to do it manually. I edited grub.conf, added openvz kernel and rebooted - it went fine. Server went up into openvz kernel and it worked, it started openvz service byitself. But after I created a container, added IP to it and attempted to start it, I couldn't. Here is the output from the shell: [root@cloud2 ~]# vzctl start 86 Starting container ... Container is mounted Container start failed (try to check kernel messages, e.g. "dmesg | tail") Container is unmounted [root@cloud2 ~]# dmesg | tail [ 1973.401596] CT: 86: failed to start with err=-105 [ 2107.113850] Failed to initialize the ICMP6 control socket (err -105). [ 2107.155523] CT: 86: stopped [ 2107.155543] CT: 86: failed to start with err=-105 [ 6348.282184] Failed to initialize the ICMP6 control socket (err -105). [ 6348.330348] CT: 86: stopped [ 6348.330361] CT: 86: failed to start with err=-105 [45184.024002] Failed to initialize the ICMP6 control socket (err -105). [45184.072086] CT: 86: stopped [45184.072099] CT: 86: failed to start with err=-105 [root@cloud2 ~]# I don't know what is wrong. I tried different templates, debian 6, centos 6, i386, amd64, but the issue is the same. What is the problem?

  Read the article

• How to use WPA2 client mode in the Linux-based Cisco WAP4410N access point

  - by joechip

  I have a Cisco WAP4410N access point that I want to use as a client to connect to a WPA2 wireless network (for WLAN service monitoring purposes). Supposedly this access point supports a "Wireless Client/Repeater" mode that allows to do this. The Repeater function is optional (I have that box unchecked so that nobody can connect to this access point wirelessly). I have verified through SSH that the access point gets configured as a client and not as a Master. But it never associates to the SSID I ask it to. This is what iwconfig shows: ath04 IEEE 802.11ng ESSID:"myownssid" Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:14 dBm Sensitivity=1/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=161/162 Noise level=161/161 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Although I've never done this from the command line, I suppose I could use wpa_supplicant or wpa_client to associate it, but I don't know how to do that without editing configuration files and the filesystem is readonly. Besides, I would have to run those commands manually after every reboot. I'd like to know how to do this the Cisco way, if possible. If not, any trick to make this work would be useful. Edit: This is with the latest firmware, 2.0.4.2. And I found that not all of the filesystem is readonly, since /var and /tmp are mounted with type ramfs.

  Read the article

• How to disable irritating Office File Validation security alert?

  - by Rabarberski

  I have Microsoft Office 2007 running on Windows 7. Yesterday I updated Office to the latest service pack, i.e. SP3. This morning, when opening an MS Word document (.doc format, and a document I created myself some months ago) I was greeted with a new dialog box saying: Security Alert - Office File Validation WARNING: Office File Validation detected a problem while trying to open this file. Opening this is probably dangerous, and may allow a malicious user to take over your computer. Contact the sender and ask them to re-save and re-send the file. For more security, verify in person or via the phone that they sent the file. Including two links to some microsoft blabla webpage. Obviously the document is safe as I created it myself some months ago. How to disable this irritating dialog box? (On a sidenote, a rethorical question: Will Microsoft never learn? I consider myself a power user in Word, but I have no clue what could be wrong with my document so that it is considered dangerous. Let alone more basic users of Word. Sigh....)

  Read the article

• wget is working only when used with sudo

  - by Yusuf

  I'm having quite a strange behavior with wget since yesterday. I can download files by using sudo wget, but when I try the same file with only wget, I can get this error: yusufh@ubuntu-yuh:~$ wget http://www.kegel.com/wine/winetricks --2010-12-17 09:34:11-- http://www.kegel.com/wine/winetricks Resolving www.kegel.com... failed: Name or service not known. wget: unable to resolve host address `www.kegel.com' and with sudo wget: yusufh@ubuntu-yuh:~$ sudo wget http://www.kegel.com/wine/winetricks --2010-12-17 09:35:37-- http://www.kegel.com/wine/winetricks Connecting to 127.0.0.1:5865... connected. Proxy request sent, awaiting response... 200 OK Length: 190672 (186K) [text/plain] Saving to: `winetricks' 100%[==================================================================================================>] 190,672 --.-K/s in 0.03s 2010-12-17 09:35:37 (6.92 MB/s) - `winetricks' saved [190672/190672] After the comments below, here is an update: I can use Google Chrome or Firefox perfectly without running it as root. I use ntlmaps to connect to the office proxy. So I need to use 127.0.0.1:5865 as the proxy for clients. Result for env | grep -i proxy: NO_PROXY=localhost,127.0.0.0/8,*.local, http_proxy=127.0.0.1:5865 ftp_proxy=127.0.0.1:5865 all_proxy=socks://127.0.0.1:5865/ ALL_PROXY=socks://127.0.0.1:5865/ https_proxy=127.0.0.1:5865 no_proxy=localhost,127.0.0.0/8,*.local while sudo env | grep -i proxy is empty! HELP!

  Read the article

• WEIRD netstat behavior on Windows XP re: www.partypoker.com

  - by tbone

  I really don't know if this is the right place to ask this, but I would really appreciate if someone that is more savvy on Windows XP (Professional) could help me out. For background, I am a 10+ years programmer, so I'm not a total idiot, but I am far from an expert on TCP/IP, etc, and this has me totally confused. When I do a netstat (on Windows XP) I seem to always get a huge amount of www.partypoker.com connections and I can't figure out where they are coming from. A netstat -o shows me that some are coming from PID xxx, which is firefox, but if I kill it, the connections still remain. Some are coming from PID 0, which makes no sense to me. SECOND PROBLEM: One would think you could edit the C:\WINDOWS\system32\drivers\etc\hosts file to block this, but it seems like my machine is ignoring the hosts file! (I have tried with the DNS client service both enabled and disabled, same result). So I just rebooted, killed all my normal programs, and I can't seem to reproduce the problem. If I was a paranoid person, I would think there was some sort of an intelligent trojan running. I am running Windows XP Pro, Kaspersky Antivirus, ccCleaner, and am fully up to date on Windows Update. What gives???? So, I guess my questions are: 1. Is anyone else seeing these wird connections to partypoker.com? 2. Why isn't my hosts filter working? 3. Is there some utility I can run to find out whats happening? I've tried autoruns.exe from sysinternals but don't see anything interesting. Am I the only one with this problem? If there are any additional things you need me to run, let me know.

  Read the article

• Inconsistent SMTP Access

  - by Mike Hanson

  I have a mail server setup on Windows Server 2008. All was working fine, until I wanted to map a drive on the server so that I can access files on another machine. Windows prompted me to configure Network Discovery, which I did with the "Home/Office" option rather than "Public". After that, several access points that worked before stopped working, like VNC, SMTP, etc. After reinstalling those packages, things appeared to be working again. Unfortunately, problems have returned with my SMTP server. I can use an web-based SMTP tester, and it connects in 62msec (as expected). However, if I telnet from my machine on the same LAN, it takes more than 20 seconds to connect! When I try to send messages from Outlook, it times out entirely with the message: Sending' reported error (0x80042109) : 'Outlook cannot connect to your outgoing (SMTP) e-mail server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).' I've checked the firewall settings, I've tried configuring it to use port 587 instead of 25, but nothing gets around this problem. Does any have any useful insights? Thanks in advance!

  Read the article

• Apache is running the wrong version of PHP.

  - by The Rook

  I am trying to enable CURL in php, and possibly update php as well. I have run into a road block where Apache seems to be running the wrong version of PHP. Here is some evidence. #lsof | grep php httpd 18397 nobody 135w REG 8,3 242 528537 /usr/local/apache/modules/libphp5.so I download the latest php 5.2.13 and build from source. I run a service httpd stop, do a make install and then I manually overwrite /usr/local/apache/modules/libphp5.so just to be safe. Using ldd i can see that its my fresh binary compiled with curl (the old one doesn't have curl.) ldd /usr/local/apache/modules/libphp5.so | grep curl libcurl.so.4 => /usr/local/lib/libcurl.so.4 (0x0064e000) I execute a phpinfo() and 5.2.3 is being executed instated of my new 5.2.13 and "curl" is nowhere to be found. What am I doing wrong? Why is curl disabled even though its statically linked? This is a RHEL 5.5 system.

  Read the article

• Setting up PerformancePoint Services on Sharepoint 2010: connection errors

  - by Rik

  I have tried to setup PerformancePoint Services on SharePoint 2010, but every time I try to use the dashboard designer, I get this error: “An error has occurred attempting to contact the specified SharePoint site” I have tried these steps but it hasn't helped. Any ideas? The event log gives the following information: WebHost failed to process a request. Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/24724999 Exception: System.ServiceModel.ServiceActivationException: The service '/_vti_bin/client.svc' cannot be activated due to an exception during compilation. The exception message is: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. Parameter name: item. --- System.ArgumentException: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. Parameter name: item at System.ServiceModel.UriSchemeKeyedCollection.InsertItem(Int32 index, Uri item) at System.Collections.Generic.SynchronizedCollection`1.Add(T item) at System.ServiceModel.UriSchemeKeyedCollection..ctor(Uri[] addresses) at System.ServiceModel.ServiceHost..ctor(Type serviceType, Uri[] baseAddresses) at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(Type serviceType, Uri[] baseAddresses) at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) --- End of inner exception stack trace --- at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) Process Name: w3wp Process ID: 2576

  Read the article

• dovecot login issue with plain passwords

  - by user3028

  I am having an odd problem in dovecot, the first time I try to login via telnet dovecot gives a error, the second time it works, both within the same telnet session. This is the telnet session, note the 'BAD Error in IMAP command received by server' and the "a OK" just after that : telnet 192.168.1.2 143 * OK Waiting for authentication process to respond.. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] Dovecot ready. a login someUserLogin supersecretpassword * BAD Error in IMAP command received by server. a login someUserLogin supersecretpassword a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS] Logged in dovecot configuration >dovecot -n # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-34-generic x86_64 Ubuntu 12.04.2 LTS auth_debug = yes auth_verbose = yes disable_plaintext_auth = no login_trusted_networks = 192.168.1.0/16 mail_location = maildir:~/Maildir passdb { driver = pam } protocols = " imap" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } This is the log file: Jul 3 12:27:51 linuxServer dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jul 3 12:27:51 linuxServer dovecot: auth: Debug: auth client connected (pid=23499) Jul 3 12:28:06 linuxServer dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured#011no-penalty#011lip=192.168.1.2#011rip=192.169.1.3#011lport=143#011rport=50438#011resp=<hidden> Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: pam(someUserLogin,192.169.1.3): lookup service=dovecot Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: pam(someUserLogin,192.169.1.3): #1/1 style=1 msg=Password: Jul 3 12:28:06 linuxServer dovecot: auth: Debug: client out: OK#0111#011user=someUserLogin Jul 3 12:28:06 linuxServer dovecot: auth: Debug: master in: REQUEST#0111823473665#01123499#0111#0113a58da53e091957d3cd306ac4114f0b9 Jul 3 12:28:06 linuxServer dovecot: auth: Debug: passwd(someUserLogin,192.169.1.3): lookup Jul 3 12:28:06 linuxServer dovecot: auth: Debug: master out: USER#0111823473665#011someUserLogin#011system_groups_user=someUserLogin#011uid=1000#011gid=1000#011home=/home/someUserLogin Jul 3 12:28:06 linuxServer dovecot: imap-login: Login: user=<someUserLogin>, method=PLAIN, rip=192.169.1.3, lip=192.168.1.2, mpid=23503, secured

  Read the article

• DLINK WBR-1310B Wireless Router seems to hang...

  - by Ira Baxter

  I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it the neighborhood computer junk store). I am using it at home (and in fact am using it this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other internet service) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Rebooting fixes it. Its brand new. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anyboyd else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK becuase a previous Linksys died of apparant heating problems). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy?

  Read the article

• HP G61 Laptop wont boot- display stays off, caps and num lock indicators blink repeatedly

  - by Benguy12

  I had my HP G61 laptop running in sleep for a while. When I came back to it about a half-hour later, it was no longer in sleep mode - the power light and the Wi-Fi indicator light were on (I keep Wi-Fi off becuase I use a wired connection) - but nothing was showing on screen. In fact, the display wasn't even turned on. So I let it sit for about 10 minutes but nothing happened. I did a force shut down and rebooted. Instead of a normal boot, the display didnt turn on, the Wi-Fi indicator was off, and the Caps Lock and Num Lock lights just blinked repeatedly. On the external keyboard i use, none of the light indicators were blinking or even on. I tried force shut-down again 10 times, then unplugged all connections except for the power cable (my laptop battery dosent hold a charge for more than 2 minutes, so I always must have a wall connection) and tried to boot again but still nothing happened. I unplugged the battery and even then nothing happened. I also tried booting with the disk drive open, and then with it closed again. On the time it was closed, I was able to successfully boot into Windows, but recieved a "Windows did not shut-down sucessfully" notice. Does anybody know why this may have happened? My PC's specs: Windows 7 Home Premium, 64-bit 4GB of physical RAM, 8GB of vRAM (on a flash drive) AMD Vision x64 processor (don't know any other specs about it) ATI Radeon graphics card, 392 MB DVD-R/W lightscribe drive 2 External hard-disks (first one is 1.5TB, second one is 1TB) custom boot-screen and boot-annimation Standard BIOS apps running before sleep: firefox 10.4 itunes 10.6 adobe photoshop extended CS5.1 rockstar games social club (running in background) microsoft powerpoint 2010 professional edition google chrome I was NOT running Aero or any fancy themes - I was using the normal windows classic theme. I have a desktop icon manager application called Stardock Fences that was also running (it runs as a service/process).

  Read the article

< Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699  | Next Page >