Search Results

Search found 20426 results on 818 pages for 'service packs'.

Page 695/818 | < Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >

• SCM8014 to FVS338

  - by Jack

  I have a SMC8014 Router/Modem that Comcast provided me with their business class service. It was not filtering malicious traffic as aggressively as I had hoped, so I purchased a NetGear ProSafe FVS338, and put this behind the SMC8014, and all my machines behind that. After some brief configuration, all machines can see out to the internet. I also have a single web server, and I have not been able to configure things so that incoming requests can reach it. This is where I need help! I would like to have the FVS339 do NAT, so that I can assign a 192.168 address to my webserver. I've tried everything I know of, and I can't get things going. I set the SMC8014 to have a LAN facing IP of 10.0.0.1, and I assigned the FVS339 a WAN facing IP of 10.0.0.2. I would like to be able to tell the SMC8014 to just forward all traffic to 10.0.0.2, but I haven't had any success. In my (unfortunately limited) understanding, what I probably want here is a static route, but I don't know how to cofigure one, or if this is really what I want. The SMC8014 wants a Destination IP, a Subnet Mask and a Gateway IP. Any help would be appreciated.

  Read the article

• Outlook 2007/2010 autodiscovering old Exchange info

  - by Dan

  I currently have an Exchange setup as follows: two Exchange 2003 servers clustered together set up as the current mailbox stores, one Exchange 2003 setup as a frontend, one Exchange 2007 set up as a frontend (was set up for testing by my predecessor, never really used intentionally), and now four Exchange 2010 servers - two mailboxes in a DAG and two with Hub/CAS. Everything seems to be working fine with one exception - Outlook 2007/2010 clients are still autodiscovering the test 2007 frontend and not the 2010 CAS array. I know this because there's an expired cert on the 2007 box so the client displays a cert error when you attempt to autocreate the outlook profile. From what I've read, there is an SCP (Service Connection Point) in AD that is pointing to the old server and it is getting returned first, causing Outlook to try it first. How can I prevent Outlook from even attempting to connect to this 2007 box from now on? http://www.msexchange.org/articles_tutorials/exchange-server-2010/management-administration/exchange-autodiscover.html When Outlook 2007 is installed on a domain joined workstation then the Outlook client will query Active Directory for the Autodiscover information. Active Directory will return a list of SCP’s and the Outlook client will automatically select the first SCP in this list. Using the information found in the SCP the Outlook client will contact the Client Access Server for its configuration information and the Outlook client will be configured automatically.

  Read the article

• Error 550 Mail Relay Message Could Not Be Sent

  - by mraliks

  I'm not sure if this is the right area to ask, but here we go. I have a client who has a couple websites on a Windows server with MailEnable as the mail manager. Any emails being sent from the server work great, except when sending to some domains, the message does not go through due to the following error: 12/13/11 01:15:56 ME-I0026: [86476200E5834227A819E6E63E0EFDA2.MAI] Sending message 12/13/11 01:15:57 ME-IXXXX: [86476200E5834227A819E6E63E0EFDA2.MAI] Remote server returned a response indicating a permanent error. Server Response: (550 Relaying not allowed**) 12/13/11 01:15:57 ME-E0036: [86476200E5834227A819E6E63E0EFDA2.MAI] MAIL FROM command Failed. Can anyone give me some leads on how to correct the settings to allow emails to go through properly? In particular, the emails are not going through to a Network Solutions email account and Network Solutions has not been very helpful thus far. In addition, can a domain's DNS settings affect this error? Currently, the domains are hosted by Network Solutions and use the Network Solutions email service to send/receive email. The server is located with a different company and the Domains' DNS points to it. Which mail related DNS entries are allowed or not allowed in this scenario? Thanks

  Read the article

• Internet Connection not working - USB LAN connection - from particular modem

  - by Paul

  I am trying to fix Internet connection on a friends Dell inspiron 1720 with XP service pack 3. It has an integrated network card that stopped working, after powering down/up the modem still didnt work I brought it back to my place to try a few things ie check cable, update driver etc... still didnt work. So I bought a USB LAN connector. It didnt work straight away but I went to configure the properties and changed the ConnectionType from AutoSense to 100 BaseT 10BaseT Full_Duplex, I basically just tried them all. From my place when connected to my desktop - 10 BaseT and 10BaseT Full_Duplex worked. From my place When connected to their laptop - 10 BaseT and 10BaseT Full_Duplex worked. Happy I went back to my friends house confident it would all work, and it didnt. Brought it back to mine and it did. While there, in Network Connections the connection is there recognized, enabled, 'working properly' it just says not connected. Also there is no led on the USB connector While at mine as above except there is an led on the USB connector and it says connected. Other difference I can think of is they have a cable modem, I'm plugged into the back of a Belkin wireless router - would this make a difference? Any other ideas what to try? (Would getting the model of the cable modem help anyone?) The USB connector is "DM9601 USB to Fast Ethernet"

  Read the article

• How can I run Gnome or KDE locally in Cygwin?

  - by John Peter Thompson Garcés

  Apparently it is possible to do this using cygwin ports, as can be seen in screenshots. I followed this how-to to get apt-cygports set up, and I used it to install gnome-session. This how-to supposedly gives the commands needed to run Gnome or KDE, but whenever I try to run Gnome, a blank X-window pops up and then quickly disappears. Here is the terminal output: $ startx /usr/bin/dbus-launch gnome-session xauth: file /home/jpthomps/.serverauth.4168 does not exist Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 1.10.3.0 OS: Windows 7 Service Pack 1 [Windows NT 6.1 build 7601] (WoW64) Package: version 1.10.3-12 built 2011-08-22 XWin was started with the following command line: /usr/bin/X :0 -auth /home/jpthomps/.serverauth.4168 (II) xorg.conf is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information LoadPreferences: /home/jpthomps/.XWinrc not found LoadPreferences: Loading /etc/X11/system.XWinrc LoadPreferences: Done parsing the configuration file... winDetectSupportedEngines - DirectDraw installed, allowing ShadowDD winDetectSupportedEngines - Windows NT, allowing PrimaryDD winDetectSupportedEngines - DirectDraw4 installed, allowing ShadowDDNL winDetectSupportedEngines - Returning, supported engines 0000001f winSetEngine - Using Shadow DirectDraw NonLocking winScreenInit - Using Windows display depth of 32 bits per pixel winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff Screen 0 added at virtual desktop coordinate (0,0). MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 winPointerWarpCursor - Discarding first warp: 637 478 (--) 5 mouse buttons found (--) Setting autorepeat to delay=500, rate=31 (--) Windows keyboard layout: "00000409" (00000409) "US", type 4 (--) Found matching XKB configuration "English (USA)" (--) Model = "pc105" Layout = "us" Variant = "none" Options = "none" Rules = "base" Model = "pc105" Layout = "us" Variant = "none" Options = "none" winBlockHandler - pthread_mutex_unlock() winProcEstablishConnection - winInitClipboard returned. winClipboardProc - DISPLAY=:0.0 winClipboardProc - XOpenDisplay () returned and successfully opened the display. xinit: XFree86_VT property unexpectedly has 0 items instead of 1 xinit: connection to X server lost waiting for X server to shut down winClipboardProc - winClipboardFlushWindowsMessageQueue trapped WM_QUIT message, exiting main loop. winClipboardProc - XDestroyWindow succeeded. winClipboardProc - Clipboard disabled - Exit from server winDeinitMultiWindowWM - Noting shutdown in progress

  Read the article

• Emails sent through SMTP on VPS are considered to be spam

  - by Ilya

  During our business we have to make regular mailing to our clients: invoices, information emails, etc. Previously we received and sent emails using mail server of our hosting provider. But as the number of clients increased, we have to order VPS and install our own SMTP server their for performing our mailings. So, now we have default provider mail server for receiving emails, let it be business.com. We have email accounts like [email protected], etc. We use this mail server to receive emails and manage our email accounts. And we have SMTP server which is running on VPS. We use this SMTP only for sending emails with From addresses like [email protected]. VPS has default DNS records created by provider, let it be IP.AD.RE.SS <- ip-ad-re-ss.provider.com. Mailings are made using either desktop email clients or custom Java-based application which uses JavaMail for sending emails. The problem is that most of emails sent by us are placed in spam folders in clients email accounts. Clients have their email in Gmail, Yahoo, Hotmail, etc. Could you please tell what is the most probable reason and solution of described problem? Are there any service in Intranet where we can send test email and get an answer with description why this email could be considered to be spam?

  Read the article

• WinDbg Problem with ntoskrnl

  - by Wilf

  I've got a similar problem to "BSOD - Unable to verify timestamp for ntoskrnl.exe", in that I can't seem to get the correct symbols to read ntoskrnl. I've followed the advice given by BK1E, but still can't get a result. Text from debug below: Loading Dump File [C:\Users\XXXX\AppData\Local\Temp\WER9D78.tmp\Mini030610-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\Windows\Symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Personal Machine Name: Kernel base = 0xfffff800`01e59000 PsLoadedModuleList = 0xfffff800`0201ddd0 Debug session time: Sat Mar 6 14:08:20.516 2010 (UTC + 0:00) System Uptime: 0 days 0:42:01.723 Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Loading Kernel Symbols ............................................................... ................................................................ ......................... Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {11, c, 0, fffff80001ec9489} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. How do I fix this issue? OS is Windows Vista x64 SP2.

  Read the article

• Thin client - cloud machine - to run via iPad, iPhone, most Androids etc

  - by Carl Lindberg

  I'm tired of having a laptop macbook that breaks down or having files that I need to sync via dropbox etc all the time via the machines to different OS installations. It sucks. I want a thin client where I can login on any machine - my iPhone, PC desktop, iPad etc to one running machine. I would like to replace a modernly powerful desktop iMac with a thin client running via my iPad. I will connect the iPad with a keyboard/mouse too so you get the idea. But I want to be able to use some of the Android phones as well (I guess most Android phones today has a good enough performance/resolution etc to run a thin client). Of course it has to be able to have input/output in sound. Printing can be solved by PDF/emailing etc - so no direct communication to the printer ports to USB etc is necessary. Is there such a service today? It should cost somewhere under something like $40/ month. I will run stuff like CPU heavy duty ableton for music production, xCode for making iOS apps, some games etc. And on the thin client also run virtual machines. VM of Ubuntu and Windows.

  Read the article

• Home server hard drive: 186k start-stop cycles in 325 days?

  - by j-g-faustus

  I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

  Read the article

• Name one good reason for immediately failing on a SMTP 4xx code

  - by Avery Payne

  I'm really curious about this. The question (highlighed in bold): Can someone name ONE GOOD REASON to have their email server permanently set up to auto-fail/immediate-fail on 4xx codes? Because frankly, it sounds like "their" setups are broken out-of-the-box. SMTP is not Instant Messaging. Stop treating it like IRC or Jabber or MSN or insert-IM-technology-here. I don't know what possesses people to have the "IMMEDIATE DELIVERY OR FAIL" mentality with SMTP setups, but they need to stop doing that. It just plain breaks things. Every two or three years, I stumble into this. Someone, somewhere, has decided in their infinite wisdom that 4xx codes are immediate failures, and suddenly its OMGWTFBBQ THE INTARNETZ ARE BORKEN, HALP SKY IS FALLING instead of "oh, it'll re-attempt delivery in about 30 minutes". It amazes me how it suddenly becomes "my" problem that a message won't go through, because someone else misconfigured "their" SMTP service. IF there is a legitimate reason for having your server permanently set up in this manner, then the first good answer will get the check. IF there is no good reason (and I suspect there isn't), then the first good-sounding-if-still-logically-flawed answer will get the check.

  Read the article

• Cannot start MySQL

  - by Mohamed Nour El-Din

  I used this command from shell to repair all Databases mysqlcheck -u root -p --auto-repair --check --optimize --all-databases and after that I restarted the server when it came back alive again I tried to open my vBulletin forum but I recived Database error message. and also tried to open phpMyAdmin but I received this error : #2002 - The server is not responding (or the local MySQL server's socket is not correctly configured). I checked the services list and found that the MySQL Service is not listed, so I tried to start it from shell I receive this error : Starting MySQL.Manager of pid-file quit without updating fi[FAILED] could anyone help me in that ? thanks in advance. update I found these lines in the log file 101101 01:36:01 mysqld started 101101 1:36:01 [Warning] Asked for 196608 thread stack, but got 126976 101101 1:36:01 [ERROR] /usr/sbin/mysqld: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 1:36:01 [ERROR] /usr/sbin/mysqld: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 1:36:01 [ERROR] Fatal error: Can't open and lock privilege tables: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 01:36:01 mysqld ended What should I do then ?

  Read the article

• Installing Trac on Windows under Apache 2.2?

  - by Warren P

  Trac is a python-powered bug-tracking and project-management app. According to Trac's wiki, there are several options for installing Trac, a standalone server (tracd), or under a dedicated webserver using one of these options: FastCGI - Not available on windows. mod_wsgi - No version of mod_wsgi available for Apache 2.2.22 and Python 2.7.3-amd64 that actually runs on my system! mod_python - no longer recommended, as mod_python is not actively maintained anymore) CGI -should not be used, as the performance is far from optimal) That leaves me with zero ways to run Trac on Windows. Apache 2.2.22 with ModWSGI loading, crashes the Apache2.2 service on startup without any error logs. Disabling the line in the apache configuration to load mod_wsgi restores sanity. I just want an installation of Trac on windows with Authentication enabled. I am unable to get authenetication to work using basic tracd like this: tracd -p 8000 --basic-auth="c:\tmp,c:\tmp\Passwords.md5.txt,mycompany" c:\tmp\RootFolder And I am unable to get Mod_WSGI installed. I'm going to keep trying to figure out a combination that works, I suspect I should have installed 32 bit python instead of 64 bit python, to start with. Did I do wrong to install Python 64 bit 2.7.3? I tried again with all 32 bit components, and still can't get MOD_WSGI to work with apache 2.2.22. I'm going to try to compile mod_wsgi myself with Visual C++ Express 2010, but it seems to me that it ought to be easier than this to get Trac running on windows, with authentication. Is there a way to run Trac on Windows, under Apache, with authentication? The last "Trac on windows" article died in 2008, leaving only this internet archive link for "Trac on windows" setup.

  Read the article

• Fresh Proxmox VE 2.1 installation with defaults can't be reached or pinged

  - by Damainman

  I am using the lastest Proxmox VE 2.1. My server has two NICS with a uplink only connected into eth0. My Server is a co-located server utilizing public IPv4 IPs. It is not behind a firewall or any system which monitors traffic. Via IPKVM I did a fresh install of Proxmox, I put in the correct IP, Mask, Gateway, and DNS information. The install went perfectly fine with no errors. Upon completion and rebooting the system: I am unable to reach the web GUI via the browser, it just times out. I am unable to ping the server. I am unable to ping outside to the Internet from within the server. Tried pinging out to 4.2.2.2 and yahoo.com I tried rebooting the server and restarting the network service. IFCONFIG shows my IP information under vmbro0 which also has the same MAC address as the eth0 device. eth0 only displays a IPv6 Scope:Link address, which I did not setup myself. This is my first time installing proxmox, but after searching for a few hours it doesn't seem like anyone else is having the same issue as me from a fresh install with just the defaults. So far the only thing I did was install it. Also, I know the network cable is good and the IP is good because I was running a Xen XCP server with the same network settings prior to wiping it to install proxmox. Some additional information: for pveversion -v (Installed proxmox-ve_2.1-f9b0f63a-26.iso) pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a) running kernel: 2.6.32-11-pve proxmox-ve-2.6.32: 2.0-66 netstat -nr (note: .136 is my network, and .137 is my gateway) Destination - Gateway - Genmask xxx.xxx.xxx.136 - 0.0.0.0 - 255.255.255.248 0.0.0.0 - xxx.xxx.xxx.137 - 0.0.0.0 /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address xxx.xxx.xxx.138 netmask 255.255.255.248 gateway xxx.xxx.xxx.137 bridge_ports eth0 bridge_stp off bridge_fd 0

  Read the article

• Debugging "clogged" TCP connections

  - by Nikratio

  I'm having trouble with an internet connection that seems to randomly "freeze" arbitrary tcp connections. The connections stay established, but no data is coming through. When this happens, netstat still shows the connection status as ESTABLISHED on both the local computer: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name Timer tcp 0 53 192.168.0.10:41129 173.255.235.238:143 ESTABLISHED 8219/gnutls-cli on (79.31/13/0) ..and the remote server: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name Timer tcp 0 0 173.255.235.238:143 68.5.174.98:41129 ESTABLISHED 5303/imapd off (0.00/0/0) However, it seems that no data at all is transferred. If I run strace on the local and remote process, both just show a repeating sequence of select calls (with different fds of course), e.g. select(6, [0 5], NULL, NULL, {0, 50000}) = 0 (Timeout) select(6, [0 5], NULL, NULL, {0, 50000}) = 0 (Timeout) select(6, [0 5], NULL, NULL, {0, 50000}) = 0 (Timeout) The internet connection overall does not seem affected, I can still establish new connections to the same service on the same server without any problems. However, the affected local applications seem to be unaware of the problem and just hang. When I look at a packet capture of this connection on the client side, the last thing that happens is that the client transmits some data, then nothing happens for about 1100 seconds, and then several TCP Retransmission requests go out, with intervals increasing from 4 seconds to 130 seconds. No activity is captured after that. After about 10 minutes, the connection on the remote end disappears from the netstat (I wasn't able to catch any intermediate state), but still stays ESTABLISHED on the local end. Finally, after some more minutes, the local application aborts with a timeout and disappears from the local netstat output as well. Does anyone have a suggestion of how I could debug this further to find out where the problem lies and how to fix it? Additionaly and/or as a temporary workaround: is is there some way to globally reduce the timeout on client and/or server to reduce the time before the local application aborts?

  Read the article

• Unable to logon using terminal server connection

  - by satch

  I have several W2K3 SP2 servers, admin TS enabled. I discovered this morning, I was unable to logon into some of them. I've a couple of Citrix servers in different farms, a SAP (IA64) app server and a cvs server. All of them show same sympthoms; remote connections are refused. I've been able to logon locally, and terminal server service is up, there are no users (so connections are not depleted). There are no errors in log in most servers. One of the Citrix ones, reported following errors: Event ID 50 Source TermDD Type Error Description The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client. and Event ID 1006 Source TermService Type Error Description The terminal server received large number of incomplete connections. The system may be under attack. Anyway, I suppose these errors appear because server isn't working, and Citrix users try to logon massively. (I nmap'ed server and port seems up). I've solved this problem rebooting before, but with so many servers affected it seems like a crappy workaround. Any idea about troubleshooting it properly? Thanks in advance

  Read the article

• Trouble with IIS SMTP relaying to Gmail

  - by saille

  I appreciate that similar questions have been asked about how to setup SMTP relaying with IIS's virtual SMTP server. However I'm still completely stumped on this problem. Here's the setup: IIS 6.0 SMTP server running on Win2k3 box with a NAT'ed IP. Company uses Gmail for all email services. An app on the box needs to send email, so normally we'd just set the app up to talk to smtp.gmail.com directly, but this app doesn't support TLS. Easy, we just setup a local SMTP relay right? So I thought. What we have done so far: Setup IIS SMTP server to relay to smtp.gmail.com, as per these excellent instructions: http://fmuntean.wordpress.com/2008/10/26/how-to-configure-iis-smtp-server-to-forward-emails-using-a-gmail-account/ The local SMTP relay allows anonymous access. Both the local IP and the loopback IP have been explicitly allowed in the Connection and Relay dialogs. Tried sending email from 2 different apps via the local SMTP server, but failed (the emails end up in the Queue folder, but never get sent). The IIS logs show the conversation with the local app, but zero conversation happening with smtp.gmail.com. The port used by gmail is open outbound, and indeed the apps we have that support TLS can send email directly via smtp.gmail.com, so there is no problem with the network. At this point I changed the smtp settings in IIS SMTP server to use a different external SMTP server and hey-presto, the local apps can send email via local IIS SMTP relay. So smtp.gmail.com fails to work with our IIS SMTP relay, but another 3rd party SMTP service works fine. We need to use smtp.gmail.com, so how to troubleshoot this one?

  Read the article

• Nvidia Linux Driver Huge Resolution

  - by darxsys

  I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

  Read the article

• App-V Problems After SCCM 2007 SP2 Upgrade

  - by GAThrawn

  We're running an SCCM (MS System Centre Config Manager, successor to SMS) 2007 environment and delivering a number of applications to clients virtualized using App-V 4.5.1. The App-V apps are delivered by SCCM in Download-and-Execute, not streaming mode. The SCCM environment was recently service packed to SCCM 2007 SP2 (amongst other things this gives Win7 support). We also pushed out the updated SCCM clients to our workstations. This seems to have broken file associations for virtual apps for a large number of our users. The users can still open their App-V apps by finding the specific app on their Start Menu and clicking it's icon, but double-clicking an associated file in Explorer, or opening an email attachment gives the "This action is only valid for installed applications" error. There is a Technet blog entry from the App-V team talking about this issue "Upgrade to ConfigMgr 2007 SP2 may break App-V File Type Associations" but running the script there comes back saying "The User Interface option has been updated" but hasn't seemed to fix the problems for any of our users. Unfortunately the Technet blogs don't seem to have comments switched on so you can't see how this has worked out for other people. Anyone else had this problem, have you found any other way to fix it?

  Read the article

• Throughput; capacity planning help for C10K like design

  - by z8000

  I am designing a network service in which clients connect and stay connected -- the model is not far off from IRC less the s2s connections. I could use some help understanding how to do capacity planning, in particular with the system resource costs associated with handling messages from/to clients. There's an article that tried to get 1 million clients connected to the same server [1]. Of course, most of these clients were completely idle in the test. If the clients sent a message every 5 seconds or so the system would surely be brought to its knees. But... How do you do less hand-waving and you know, measure such a breaking point? We're talking about messages being sent by a client over a TCP socket, into the kernel, and read by an application. The data is shuffled around in memory from one buffer to another. Do I need to consider memory throughput ("5 GT/s" [2], etc.)? I'm pretty sure I have the ability to measure the basic memory requirements due to TCP/IP buffers, expected bandwidth, and CPU resources required to process messages. I'm a little dim on what I'm calling "thoughput". Help! Also, does anyone really do this? Or, do most people sort of hand-wave and see what the real world offers, and then react appropriately? [1] http://www.metabrew.com/article/a-million-user-comet-application-with-mochiweb-part-3/ [2] http://en.wikipedia.org/wiki/GT/s

  Read the article

• sudo or acl or setuid/setgid ?

  - by Xavier Maillard

  Hi, for a reason I do not really understand, everyone wants sudo for all and everything. At work we even have as many entries as there are way to read a logfile (head/tail/cat/more, ...). I think, sudo is defeating here. I'd rather use a mix of setgid/setuid directories and add ACL here and there but I really need to know what are the best practices before starting up. Our servers have %admin, %production, %dba, %users -i.e many groups and many users. Each service (mysql, apache, ...) has its own way to install privileges but members of the %production group must be able to consult configuration file or even log files. There is still the solution to add them into the right groups (mysql...) and set the good permission. But I do not want to usermod all users, I do not want to modify standards permissions since it could change after each upgrade. On the other hand, setting acls and/or mixing setuid/setgid on directories is something I could easily do without "defacing" the standard distribution. What do you think about this ? Taking the mysql example, that would look like this: setfacl d:g:production:rx,d:other::---,g:production:rx,other::--- /var/log/mysql /etc/mysql Do you think this is good practise or should I definetely usermod -G mysql and play with standard permissions system ? Thank you

  Read the article

• I am under DDoS. What can I do?

  - by Falcon Momot

  This is a Canonical Question about DoS and DDoS mitigation. I found a massive traffic spike on a website that I host today; I am getting thousands of connections a second and I see I'm using all 100Mbps of my available bandwidth. Nobody can access my site because all the requests time out, and I can't even log into the server because SSH times out too! This has happened a couple times before, and each time it's lasted a couple hours and gone away on its own. Occasionally, my website has another distinct but related problem: my server's load average (which is usually around .25) rockets up to 20 or more and nobody can access my site just the same as the other case. It also goes away after a few hours. Restarting my server doesn't help; what can I do to make my site accessible again, and what is happening? Relatedly, I found once that for a day or two, every time I started my service, it got a connection from a particular IP address and then crashed. As soon as I started it up again, this happened again and it crashed again. How is that similar, and what can I do about it?

  Read the article

• Mail queue directory stuck in IIS SMTP server

  - by Loftx

  Hi there, We have an IIS SMTP server which sends out a largish number of mails (4000 or so) in batches overnight, and recently we've seen mails get "stuck" in the queue directory. Normally restarting the SMTP service seems to fix this, but it's happened a few times so I'm looking for more information. We sent out around 12,000 emails last night in 3 batches of roughly 4000. Around 10 hours later there are still 2000 or so in the queue directory which don't seem to be leaving the queue. Any new mails which appear in the queue are picked up almost immediately and sent to their destination, but these 2000 or so don't seem to move. Looking at the date modified on the emails some match up with the time they were sent, but around 1000 of them have modified dates stretching up to now. e.g. there was one mail with a date in the message headers of 5:30 this morning, but it's date modified is 11:50 and there are 3 other messages with a date modified of 11:50, then 5 with 11:49, 2 with 11:45 stretching back for a few hours and all with actual message headers far earlier. The logs for the server look like this 11:54:52 127.0.0.1 EHLO - 250 11:54:52 127.0.0.1 MAIL - 250 11:54:52 127.0.0.1 RCPT - 250 11:54:52 127.0.0.1 DATA - 250 11:54:52 127.0.0.1 QUIT - 240 11:54:53 85.115.62.190 - - 0 11:54:53 85.115.62.190 EHLO - 0 11:54:53 85.115.62.190 - - 0 11:54:53 85.115.62.190 MAIL - 0 11:54:53 85.115.62.190 - - 0 11:54:53 85.115.62.190 RCPT - 0 11:54:53 85.115.62.190 - - 0 11:54:53 85.115.62.190 DATA - 0 11:54:53 85.115.62.190 - - 0 11:54:54 85.115.62.190 - - 0 11:54:54 85.115.62.190 QUIT - 0 11:54:54 85.115.62.190 - - 0 All codes are either 250 or 240 or 0. I believe 250 and 240 indicate success, but I don't know what all the 0s are. Could someone with more experience of mail server troubleshooting give me a hand or tell me what to try next. Thanks, Tom

  Read the article

• Gmail.com detect mail as spam, but the server is not on any BlackList

  - by Tomer W

  I have an issue with Google. (GMail to be exact) About 1 month ago, we had a security breach, and mail was relayed through our servers. we got listed in almost ALL Black-Lists :( we fixed the problem, and requested removal from Black-lists, which was granted easily. currently (over 3 weeks), we are not sending any spam anymore. furthermore, we got clear from all the Black-lists (MxToolBox Black-List Search Result) But, GMail still refuse to get Anything from the server, stating '550 Spam'. Following, Telnet attempt to send to gmail: 220 mx.google.com ESMTP g47si45436208eep.123 helo megatec.co.il 250 mx.google.com at your service mail from: <[email protected]> 250 2.1.0 OK g47si45436208eep.123 rcpt to: <[email protected]> 250 2.1.5 OK g47si45436208eep.123 Data 354 Go ahead g47si45436208eep.123 Test123 . 550-5.7.1 [62.219.123.33 11] Our system has detected that this message is 550-5.7.1 likely unsolicited mail. To reduce the amount of spam sent to Gmail, 550-5.7.1 this message has been blocked. Please visit 550-5.7.1 http://support.google.com/mail/bin/answer.py?hl=en&answer=188131 for 550 5.7.1 more information. g47si45436208eep.123 Connection to host lost. i tried filling the form @ Gmail - Report Delivery Problem i also tried reaching Google by phone, but the message was to go to the Link mentioned above. I Checked ReverseDNS and is ok... We dont have TLS, but that shouldn't be a problem, shouldn't it? Note: we are not a Bulk sender. Anyone has an idea? what can be blocking our IP? Anyone know whom can be contacted in order to resolve this BL listing?

  Read the article

• Incorrect deployment of WSGI app to AWS using Elastic Beanstalk

  - by Dzmitry Zhaleznichenka

  cross-link to AWS forums I have developed a simple Python web service using WSGI and would like to deploy it to AWS cloud using Elastic Beanstalk. My problem is I cannot make all the options I specify in Elastic Beanstalk configuration to be correctly configured in the cloud. For deployment, I use Elastic Beanstalk CLI utility. I have run eb init command and set up the required parameters. After this, a directory named .elasticbeanstalk was created in my source tree. It has two config files that are used for deployment, namely config and optionsettings. The latter one among the other options contains the WSGI configuration that has to update /etc/httpd/conf.d/wsgi.conf at the instances. After some of my adjustments the file has the following settings: [aws:elasticbeanstalk:application:environment] DJANGO_SETTINGS_MODULE = PARAM1 = PARAM2 = PARAM4 = PARAM3 = PARAM5 = [aws:elasticbeanstalk:container:python] WSGIPath = handler.py NumProcesses = 2 StaticFiles = /static= NumThreads = 10 [aws:elasticbeanstalk:container:python:staticfiles] /static = static/ [aws:elasticbeanstalk:hostmanager] LogPublicationControl = false [aws:autoscaling:launchconfiguration] InstanceType = t1.micro EC2KeyName = zmicier-aws [aws:elasticbeanstalk:application] Application Healthcheck URL = [aws:autoscaling:asg] MaxSize = 10 MinSize = 1 Custom Availability Zones = [aws:elasticbeanstalk:monitoring] Automatically Terminate Unhealthy Instances = true [aws:elasticbeanstalk:sns:topics] Notification Endpoint = Notification Protocol = email It turns out that not all of these options are considered when I start the environment or update it. Thus, when I update NumThreads or NumProcesses, the respective parameters get changed in wsgi.conf as expected. But whatever I write to the WSGIPath and StaticFiles parameters, I'm not able to automatically change the respective values of wsgi.conf, they remain Alias /static /opt/python/current/app/ WSGIScriptAlias / /opt/python/current/app/application.py which drives me nuts. Moreover, when I deploy my application using git aws.push and having the following contents of .ebextensions/python.config file, neither of options I specify in it affects the deployment. option_settings: - namespace: aws:elasticbeanstalk:container:python option_name: WSGIPath value: mysite/wsgi.py - namespace: aws:elasticbeanstalk:container:python option_name: NumProcesses value: 5 - namespace: aws:elasticbeanstalk:container:python option_name: NumThreads value: 25 - namespace: aws:elasticbeanstalk:container:python:staticfiles option_name: /static/ value: app/static/ I wonder what I should do to force AWS use all the parameters I specify in the configuration, namely the WSGI Path and path to my static data.

  Read the article

• Error in Apache: /var/run/apache2 not found

  - by Julen

  This is more self-answered question but since it drove me crazy I would like to share with the community and maybe someone can tell me why it happened or what it caused. The thing is I wanted to install in my Ubuntu 10.4 machine a CGI app, one built in the samples that come with the gSOAP toolkit. My intention was to access those from ASP .NET machine. Regular Ubuntu does not come with Apache so I install it from Sypnatic. Pretty easy. I followed this How to Install Apache2 webserver with PHP,CGI and Perl Support in Ubuntu Server. Instead of apache.conf I tweaked httpd.conf since a college here used that file instead of the first to put his Apache running. Besides I was able to access his CGI from my ASP .NET but mysteriously I could not from mine, I was getting always "The request failed with HTTP status 503: Service Temporarily Unavailable". Checking Apache error.log I found these messages: No such file or directory: unable to connect to cgi daemon after multiple tries: /home/julen/htdocs/cgi-bin/calcserver And looking more carefully whenever I restarted Apache I got this other message No such file or directory: Couldn't bind unix domain socket /var/run/apache2/cgisock. cgid daemon failed to initialize I am pretty new with Ubuntu and I could not think that Apache and Synaptic made a mistake in the installation process of the server, but it is true that the /var/run/apache2 was missing whereas in my college's computer was not. I tried to find and "elegant" solution but I found a post from 2006 that had an slight reference to it. Finally I decided to create the folder myself (as root) and then everything worked fine. Hope this helps others if they encounter a similar problem. Still I have the doubt why the folders was not created in the first place. Best, Julen.

  Read the article

< Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >