Search Results

Search found 17782 results on 712 pages for 'questions and answers'.

Page 696/712 | < Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >

• Why are my USB 2.0 devices crashing Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors - it has a NEC uPD720102 chipset. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine? Edit: Updated the USB 2.0 info with reference to actual card - http://www.xpcgear.com/lpnec4u.html

  Read the article

• Clouds Everywhere But not a Drop of Rain – Part 3

  - by sxkumar

  I was sharing with you how a broad-based transformation such as cloud will increase agility and efficiency of an organization if process re-engineering is part of the plan.  I have also stressed on the key enterprise requirements such as “broad and deep solutions, “running your mission critical applications” and “automated and integrated set of capabilities”. Let me walk you through some key cloud attributes such as “elasticity” and “self-service” and what they mean for an enterprise class cloud. I will also talk about how we at Oracle have taken a very enterprise centric view to developing cloud solutions and how our products have been specifically engineered to address enterprise cloud needs. Cloud Elasticity and Enterprise Applications Requirements Easy and quick scalability for a short-period of time is the signature of cloud based solutions. It is this elasticity that allows you to dynamically redistribute your resources according to business priorities, helps increase your overall resource utilization, and reduces operational costs by allowing you to get the most out of your existing investment. Most public clouds are offering a instant provisioning mechanism of compute power (CPU, RAM, Disk), customer pay for the instance-hours(and bandwidth) they use, adding computing resources at peak times and removing them when they are no longer needed. This type of “just-in-time” serving of compute resources is well known for mid-tiers “state less” servers such as web application servers and web servers that just need another machine to start and run on it but what does it really mean for an enterprise application and its underlying data? Most enterprise applications are not as quite as “state less” and justifiably so. As such, how do you take advantage of cloud elasticity and make it relevant for your enterprise apps? This is where Cloud meets Grid Computing. At Oracle, we have invested enormous amount of time, energy and resources in creating enterprise grid solutions. All our technology products offer built-in elasticity via clustering and dynamic scaling. With products like Real Application Clusters (RAC), Automatic Storage Management, WebLogic Clustering, and Coherence In-Memory Grid, we allow all your enterprise applications to benefit from Cloud elasticity –both vertically and horizontally - without requiring any application changes. A number of technology vendors take a rather simplistic route of starting up additional or removing unneeded VM as the "Cloud Scale-Out" solution. While this may work for stateless mid-tier servers where load balancers can handle the addition and remove of instances transparently but following a similar approach for the database tier - often called as "database sharding" - requires significant application modification and typically does not work with off the shelf packaged applications. Technologies like Oracle Database Real Application Clusters, Automatic Storage Management, etc. on the other hand bring the benefits of incremental scalability and on-demand elasticity to ANY application by providing a simplified abstraction layers where the application does not need deal with data spread over multiple database instances. Rather they just talk to a single database and the database software takes care of aggregating resources across multiple hardware components. It is the technologies like these that truly make a cloud solution relevant for enterprises.  For customers who are looking for a next generation hardware consolidation platform, our engineered systems (e.g. Exadata, Exalogic) not only provide incredible amount of performance and capacity, they also reduce the data center complexity and simplify operations. Assemble, Deploy and Manage Enterprise Applications for Cloud Products like Oracle Virtual assembly builder (OVAB) resolve the complex problem of bringing the cloud speed to complex multi-tier applications. With assemblies, you can not only provision all components of a multi-tier application and wire them together by push of a button, other aspects of application lifecycle, such as real-time application testing, scale-up/scale-down, performance and availability monitoring, etc., are also automated using Oracle Enterprise Manager.  An essential criteria for an enterprise cloud to succeed is the ability to ensure business service levels especially when business users have either full visibility on the usage cost with a “show back” or a “charge back”. With Oracle Enterprise Manager 12c, we have created the most comprehensive cloud management solution in the industry that is capable of managing business service levels “applications-to-disk” in a enterprise private cloud – all from a single console. It is the only cloud management platform in the industry that allows you to deliver infrastructure, platform and application cloud services out of the box. Moreover, it offers integrated and complete lifecycle management of the cloud - including planning and set up, service delivery, operations management, metering and chargeback, etc .  Sounds unbelievable? Well, just watch this space for more details on how Oracle Enterprise Manager 12c is the nerve center of Oracle Cloud! Our cloud solution portfolio is also the broadest and most deep in the industry  - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry.  And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies.  Summary  But the intent of this blog post isn't to dwell on how great our solutions are (these are just some examples to illustrate how we at Oracle have approached this problem space). Rather it is to help you ask the right questions before you embark on your cloud journey.  So to summarize, here are the key takeaways.       It is critical that you are clear on why you are building the cloud. Successful organizations keep business benefits as the first and foremost cloud objective. On the other hand, those who approach this purely as a technology project are more likely to fail. Think about where you want to be in 3-5 years before you get started. Your long terms objectives should determine what your first step ought to be. As obvious as it may seem, more people than not make the first move without knowing where they are headed.  Don’t make the mistake of equating cloud to virtualization and Infrastructure-as-a-Service (IaaS). Spinning a VM on-demand will give some short term relief to your IT staff but is unlikely to solve your larger business problems. As such, even if IaaS is your first step towards a more comprehensive cloud, plan the roadmap around those higher level services before you begin. And ask your vendors on how they are going to be your partners in this journey. Capabilities like self-service access and chargeback/showback are absolutely critical if you really expect your cloud to be transformational. Your business won't see the full benefits of the cloud until it empowers them with same kind of control and transparency that they are used to while using a public cloud service.  Evaluate the benefits of integration, as opposed to blindly following the best-of-breed strategy. Integration is a huge challenge and more so in a cloud environment. There are enormous costs associated with stitching a solution out of disparate components and even more in maintaining it. Hope you found these ideas helpful. Looking forward to hearing your thoughts and experiences.

  Read the article

• Windows XP - Repairing Corrupt System32\Config\System File

  - by SimonTewsi

  My apologies for this long post. I would like to describe the mess I'm in then ask some questions about how to fix it: Starting up my Windows XP SP1 machine I got the following message: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Tried restarting several times with same results then Googled the problem. Tried the fix described here: http://icrontic.com/articles/repair%5Fwindows%5Fxp (since my CPU does not have XD buffer overflow protection I did not set /NOEXECUTE=OPTIN as OS Load Option). This did not work. I then found another fix for the problem on hardwareanalysis.com: Basically, boot to dos prompt (or recovery console if available) and make backups of the following files:- c:\windows\system32\config\system (to c:\windows\tmp\system.bak) c:\windows\system32\config\software (to c:\windows\tmp\software.bak) c:\windows\system32\config\sam (to c:\windows\tmp\sam.bak) c:\windows\system32\config\security (to c:\windows\tmp\security.bak) c:\windows\system32\config\default (to c:\windows\tmp\default.bak) then delete the above files (not the backups!) then copy the above files in c:\windows\repair to the c:\windows\system32\config directory restart your computer This did work (and I wish I'd done it first, since it was completely reversible, unlike the first method). However, afterwards I found that all the user accounts on the PC were gone. I resurrected them by copying the backed up security file back into the system32\config folder (I may have copied the SAM file from backup as well, I cannot remember clearly now). Now the PC boots up and I can log in. However things are still not right. I tried to alter one of the user accounts and found I could not access the User Accounts in the Control Panel. Microsoft KB 919292 had a fix for the problem. However, the fix failed with a Windows Installer error: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer 3.1 was already installed. I reinstalled it but continued to get the Windows Installer error whenever I tried to run the fix in KB 919292. I have since noticed another three problems: 1) Several applications on the PC no longer run, eg Microsoft Word. Shortcuts no longer seem to do anything and if I run the executables directly (eg for Word by running C:\Program Files\Microsoft Office\Office10\Winword.exe) I get a message similar to: "Microsoft Word has not been installed for the current user. Please run setup to install the application." even though the executable is clearly visible in Windows Explorer (and even though Word actually opens - the error dialog appears after Word has opened. Clicking OK to the error dialog closes Word). 2) One or the other of the two fixes I tried for the original problem caused new user profiles to be created. eg My old user profile under the Documents and Settings folder was Simon. The old one still exists but there is now a new one called Simon.DBQ2515. Obviously the new one is being used because Opera (my browser that still works) no longer sees the bookmarks file under my old profile. 3) Probably as a result of fooling around with the Security file, when I try to boot off the Windows XP CD and run the Recovery Console I am now asked for the administrator password. The only problem is there is no administrator account on the PC. There is one account, LocalAdmin, that has administrative rights but when I entered the password for that account it did not work. It is so long since I originally set up the PC that I cannot remember if the original administrator account ever had a password and, if so, what it was. So, my question is: How can I fix this mess? In particular: 1) Having tried the two fixes linked to above, have I irrepairably damaged the Windows instance, requiring a clean reinstallation of Windows + all applications, or should it be possible to get the machine working correctly again without such drastic measures? 2) Is there any way to get around the administrator password so I can use the Recovery Console again, given that there is no account called "administrator" and the password for the one account with admin privileges does not work (and that, before I started the second fix, I was not asked for an administrator password)? 3) Is there any easy way to fix the problem with the applications that think they are not installed? 4) Is there any easy way to fix the problem of the Windows Installer that does not work, even if reinstalled? Cheers Simon

  Read the article

• Help with OpenVPN setup on Windows Server 2003

  - by Bill Johnson

  Hi all, Just wondering if someone can assist me further with the set-up of OpenVPN on my Windows Server 2003. I have configured Win Server as per the following guide: http://tinyurl.com/kxusv and I'm now at the stage of Creating the config files. I have a few questions that I need some assistance with. My server IP is 192.168.1.10 and my routers IP address is 192.168.1.1 (the router is a Netgear DGN2000). I have edited the server.ovpn file as per the following: push "dhcp-option DNS X.X.X.X" # Replace the Xs with the IP address of the DNS for your home network (usually your ISP's DNS) push "dhcp-option DNS X.X.X.X" # A second DNS server if you have one to include my ISP DNS and I have not edited anything else. Now my issue is with the client1.opvpn file as per the below: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 To me it looks like I will need to amend the following: remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 So, should the first line be the static IP of the machine that I'm applying this to? The IP address of the server (192.168.1.10) or something else? I'm also stuck on the second part 'route 192.168.1.0 255.255.255.0 vpn_gateway 3' Should this be the router IP which is 192.168.1.1 and the subnet is 255.255.255.0 and that is all I need to alter? The final part that I'm stuggling with is Configuring the router. Basically I have a Netgear DGN2000 and as it mentions that the router should be configured to port forward port 1194 to the server’s IP address of 192.168.1.150 all I have been able to do is in 'Firewall Rules' and on 'Inbound Services', set the Service to 'Any(ALL) and Send to LAN Server point to 1923.168.1.150. I'm not sure if this is correct? It is the following stage of the help guide that I'm struggling with and really need some help with: You need to make sure the port you configured OpenVPN to listen on is forwarded on the router to the IP address of your server. On the WRT54G, port forwarding is configured in the “Applications & Gaming” section. Enter 1194 for the port, UDP for the protocol, and 192.168.1.150 for the IP address. Make sure the entry is enabled and then save the setting. Next, you need to add an entry to the router’s Routing Table. This will enable the router to properly route requests from the clients to the TAP interface of the server. On the WRT54G you would go to the “Setup” page and then the “Advanced Routing” section. Enter the follwing info to make the entry: Enter Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.252 Default Gateway: 192.168.1.150 Interface: LAN & Wireless Once the info has been typed in make sure you save the setting. Can anyone possibly guide me through setting this part up with my Netgear router. I see that once I have these 2 parts complete I'm there so I would really appreciate someone walking me through what is required in completing this. Much appreciated.

  Read the article

• Screen Casting using ffmpeg (too fast)

  - by rowman

  I can use ffmpeg to make screen casts: ffmpeg -f x11grab -s 1280x800 -i :0.0 -c:v libx264 -framerate 30 -r 30 -crf 18 out.mkv However the output comes out to be too fast paced. It also happens with GTK RecordMyDesktop if I enable the encode on the fly. So, the questions is how to get a normal video pace. Also in order to capture the sound with ffmpeg what option should be used? FFmpeg Output: ffmpeg -f x11grab -s 1280x800 -r 30 -i :0.0 -c:v libx264 -framerate 30 -r 30 -crf 18 out.mkv ffmpeg version N-35162-g87244c8 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 7 2012 15:56:19 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: --enable-gpl --enable-libfaac --enable-libfdk-aac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libvpx --enable-x11grab --enable-libx264 --enable-nonfree --enable-version3 libavutil 51. 73.102 / 51. 73.102 libavcodec 54. 64.100 / 54. 64.100 libavformat 54. 29.105 / 54. 29.105 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 19.102 / 3. 19.102 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 16.100 / 0. 16.100 libpostproc 52. 1.100 / 52. 1.100 [x11grab @ 0xab896a0] device: :0.0 -> display: :0.0 x: 0 y: 0 width: 1280 height: 800 [x11grab @ 0xab896a0] shared memory extension found [x11grab @ 0xab896a0] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0': Duration: N/A, start: 1350136942.608988, bitrate: 983040 kb/s Stream #0:0: Video: rawvideo (BGR[0] / 0x524742), bgr0, 1280x800, 983040 kb/s, 30 tbr, 1000k tbn, 30 tbc [libx264 @ 0xab87320] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 SlowCTZ SlowAtom [libx264 @ 0xab87320] profile High 4:4:4 Predictive, level 3.2, 4:4:4 8-bit [libx264 @ 0xab87320] 264 - core 128 r2 198a7ea - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=4 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=18.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, matroska, to 'out.mkv': Metadata: encoder : Lavf54.29.105 Stream #0:0: Video: h264, yuv444p, 1280x800, q=-1--1, 1k tbn, 30 tbc Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Press [q] to stop, [?] for help frame= 10 fps=0.0 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 19 fps= 17 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 28 fps= 17 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 37 fps= 17 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 45 fps= 16 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 47 fps= 14 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 52 fps= 13 q=24.0 size= 257kB time=00:00:00.00 bitrate=2101632.0kbiframe= 55 fps= 12 q=24.0 size= 257kB time=00:00:00.10 bitrate=20808.2kbitsframe= 59 fps= 11 q=24.0 size= 289kB time=00:00:00.23 bitrate=10145.0kbitsframe= 64 fps= 11 q=24.0 size= 289kB time=00:00:00.40 bitrate=5894.7kbits/frame= 70 fps= 11 q=24.0 size= 289kB time=00:00:00.60 bitrate=3933.1kbits/frame= 72 fps= 10 q=24.0 size= 289kB time=00:00:00.66 bitrate=3549.2kbits/frame= 77 fps=9.8 q=24.0 size= 289kB time=00:00:00.83 bitrate=2837.7kbits/frame= 80 fps=9.6 q=24.0 size= 289kB time=00:00:00.93 bitrate=2533.5kbits/frame= 85 fps=9.3 q=24.0 size= 289kB time=00:00:01.10 bitrate=2146.9kbits/frame= 89 fps=9.3 q=24.0 size= 289kB time=00:00:01.23 bitrate=1917.1kbits/frame= 92 fps=9.1 q=24.0 size= 289kB time=00:00:01.33 bitrate=1773.3kbits/frame= 96 fps=9.0 q=24.0 size= 289kB time=00:00:01.46 bitrate=1612.4kbits/frame= 99 fps=8.8 q=24.0 size= 321kB time=00:00:01.56 bitrate=1676.8kbits/frame= 104 fps=8.7 q=24.0 size= 321kB time=00:00:01.73 bitrate=1515.2kbits/frame= 109 fps=5.3 q=24.0 Lsize= 1093kB time=00:00:03.56 bitrate=2511.5kbits/s video:1092kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.120198% [libx264 @ 0xab87320] frame I:3 Avg QP:18.93 size:142610 [libx264 @ 0xab87320] frame P:43 Avg QP:20.79 size: 15751 [libx264 @ 0xab87320] frame B:63 Avg QP:23.75 size: 195 [libx264 @ 0xab87320] consecutive B-frames: 21.1% 1.8% 11.0% 66.1% [libx264 @ 0xab87320] mb I I16..4: 50.0% 21.1% 28.9% [libx264 @ 0xab87320] mb P I16..4: 6.1% 0.9% 3.2% P16..4: 5.5% 1.2% 0.6% 0.0% 0.0% skip:82.5% [libx264 @ 0xab87320] mb B I16..4: 0.4% 0.1% 0.0% B16..8: 2.9% 0.1% 0.0% direct: 0.0% skip:96.5% L0:40.7% L1:57.0% BI: 2.3% [libx264 @ 0xab87320] 8x8 transform intra:14.5% inter:46.1% [libx264 @ 0xab87320] coded y,u,v intra: 33.5% 24.1% 25.4% inter: 0.9% 0.4% 0.4% [libx264 @ 0xab87320] i16 v,h,dc,p: 70% 26% 1% 3% [libx264 @ 0xab87320] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 11% 21% 30% 5% 7% 5% 7% 4% 10% [libx264 @ 0xab87320] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 32% 35% 12% 2% 4% 3% 4% 3% 5% [libx264 @ 0xab87320] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0xab87320] ref P L0: 57.0% 5.6% 26.8% 10.6% [libx264 @ 0xab87320] ref B L0: 69.4% 22.6% 8.0% [libx264 @ 0xab87320] ref B L1: 93.7% 6.3% [libx264 @ 0xab87320] kb/s:2460.40

  Read the article

• Who could ask for more with LESS CSS? (Part 2 of 3&ndash;Setup)

  - by ToStringTheory

  Welcome to part two in my series covering the LESS CSS language.  In the first post, I covered the two major CSS precompiled languages - LESS and SASS to a small extent, iterating over some of the features that you could expect to find in them.  In this post, I will go a little further in depth into the setup and execution of using the LESS framework. Introduction It really doesn’t take too much to get LESS working in your project.  The basic workflow will be including the necessary translator in your project, defining bundles for the LESS files, add the necessary code to your layouts.cshtml file, and finally add in all your necessary styles to the LESS files!  Lets get started… New Project Just like all great experiments in Visual Studio, start up a File > New Project, and create a new MVC 4 Web Application.  The Base Package After you have the new project spun up, use the Nuget Package Manager to install the Bundle Transformer: LESS package. This will take care of installing the main translator that we will be using for LESS code (dotless which is another Nuget package), as well as the core framework for the Bundle Transformer library.  The installation will come up with some instructions in a readme file on how to modify your web.config to handle all your *.less requests through the Bundle Transformer, which passes the translating onto dotless. Where To Put These LESS Files?! This step isn’t really a requirement, however I find that I don’t like how ASP.Net MVC just has a content directory where they store CSS, content images, css images….  In my project, I went ahead and created a new directory just for styles – LESS files, CSS files, and images that are only referenced in LESS or CSS.  Ignore the MVC directory as this was my testbed for another project I was working on at the same time.  As you can see here, I have: A top level directory for images which contains only images used in a page A top level directory for scripts A top level directory for Styles A few directories for plugins I am using (Colrizr, JQueryUI, Farbtastic) Multiple *.less files for different functions (I’ll go over these in a minute) I find that this layout offers the best separation of content types.  Bring Out Your Bundles! The next thing that we need to do is add in the necessary code for the bundling of these LESS files.  Go ahead and open your BundleConfig.cs file, usually located in the /App_Start/ folder of the project.  As you will see in a minute, instead of using the method Microsoft does in the base MVC 4 project, I change things up a bit.  Define Constants The first thing I do is define constants for each of the virtual paths that will be used in the bundler: The main reason is that I hate magic strings in my program, so the fact that you first defined a virtual path in the BundleConfig file, and then used that path in the _Layout.cshtml file really irked me. Add Bundles to the BundleCollection Next, I am going to define the bundles for my styles in my AddStyleBundles method: That is all it takes to get all of my styles in play with LESS.  The CssTransformer and NullOrderer types come from the Bundle Transformer we grabbed earlier.  If we didn’t use that package, we would have to write our own function (not too hard, but why do it if it’s been done). I use the site.less file as my main hub for LESS - I will cover that more in the next section. Add Bundles To Layout.cshtml File With the constants in the BundleConfig file, instead of having to use the same magic string I defined for the bundle virtual path, I am able to do this: Notice here that besides the RenderSection magic strings (something I am working on in another side project), all of the bundles are now based on const strings.  If I need to change the virtual path, I only have to do it in one place.  Nifty! Get Started! We are now ready to roll!  As I said in the previous section, I use the site.less file as a central hub for my styles: As seen here, I have a reset.css file which is a simple CSS reset.  Next, I have created a file for managing all my color variables – colors.less: Here, you can see some of the standards I started to use, in this case for color variables.  I define all color variables with the @col prefix.  Currently, I am going for verbose variable names. The next file imported is my font.less file that defines the typeface information for the site: Simple enough.  A couple of imports for fonts from Google, and then declaring variables for use throughout LESS.  I also set up the heading sizes, margins, etc..  You can also see my current standardization for font declaration strings – @font. Next, I pull in a mixins.less file that I grabbed from the Twitter Bootstrap library that gives some useful parameterized mixins for use such as border-radius, gradient, box-shadow, etc… The common.less file is a file that just contains items that I will be defining that can be used across all my LESS files.  Kind of like my own mixins or font-helpers: Finally I have my layout.less file that contains all of my definitions for general site layout – width, main/sidebar widths, footer layout, etc: That’s it!  For the rest of my one off definitions/corrections, I am currently putting them into the site.less file beneath my original imports Note Probably my favorite side effect of using the LESS handler/translator while bundling is that it also does a CSS checkup when rendering…  See, when your web.config is set to debug, bundling will output the url to the direct less file, not the bundle, and the http handler intercepts the call, compiles the less, and returns the result.  If there is an error in your LESS code, the CSS file can be returned empty, or may have the error output as a comment on the first couple lines. If you have the web.config set to not debug, then if there is an error in your code, you will end up with the usual ASP.Net exception page (unless you catch the exception of course), with information regarding the failure of the conversion, such as brace mismatch, undefined variable, etc…  I find it nifty. Conclusion This is really just the beginning.  LESS is very powerful and exciting!  My next post will show an actual working example of why LESS is so powerful with its functions and variables…  At least I hope it will!  As for now, if you have any questions, comments, or suggestions on my current practice, I would love to hear them!  Feel free to drop a comment or shoot me an email using the contact page.  In the mean time, I plan on posting the final post in this series tomorrow or the day after, with my side project, as well as a whole base ASP.Net MVC4 templated project with LESS added in it so that you can check out the layout I have in this post.  Until next time…

  Read the article

• Java EE 7 Survey Results!

  - by reza_rahman

  On November 8th, the Java EE EG posted a survey to gather broad community feedback on a number of critical open issues. For reference, you can find the original survey here. We kept the survey open for about three weeks until November 30th. To our delight, over 1100 developers took time out of their busy lives to let their voices be heard! The results of the survey were sent to the EG on December 12th. The subsequent EG discussion is available here. The exact summary sent to the EG is available here. We would like to take this opportunity to thank each and every one the individuals who took the survey. It is very appreciated, encouraging and worth it's weight in gold. In particular, I tried to capture just some of the high-quality, intelligent, thoughtful and professional comments in the summary to the EG. I highly encourage you to continue to stay involved, perhaps through the Adopt-a-JSR program. We would also like to sincerely thank java.net, JavaLobby, TSS and InfoQ for helping spread the word about the survey. Below is a brief summary of the results... APIs to Add to Java EE 7 Full/Web Profile The first question asked which of the four new candidate APIs (WebSocket, JSON-P, JBatch and JCache) should be added to the Java EE 7 Full and Web profile respectively. As the following graph shows, there was significant support for adding all the new APIs to the full profile: Support is relatively the weakest for Batch 1.0, but still good. A lot of folks saw WebSocket 1.0 as a critical technology with comments such as this one: "A modern web application needs Web Sockets as first class citizens" While it is clearly seen as being important, a number of commenters expressed dissatisfaction with the lack of a higher-level JSON data binding API as illustrated by this comment: "How come we don't have a Data Binding API for JSON" JCache was also seen as being very important as expressed with comments like: "JCache should really be that foundational technology on which other specs have no fear to depend on" The results for the Web Profile is not surprising. While there is strong support for adding WebSocket 1.0 and JSON-P 1.0 to the Web Profile, support for adding JCache 1.0 and Batch 1.0 is relatively weak. There was actually significant opposition to adding Batch 1. 0 (with 51.8% casting a 'No' vote). Enabling CDI by Default The second question asked was whether CDI should be enabled in Java EE environments by default. A significant majority of 73.3% developers supported enabling CDI, only 13.8% opposed. Comments such as these two reflect a strong general support for CDI as well as a desire for better Java EE alignment with CDI: "CDI makes Java EE quite valuable!" "Would prefer to unify EJB, CDI and JSF lifecycles" There is, however, a palpable concern around the performance impact of enabling CDI by default as exemplified by this comment: "Java EE projects in most cases use CDI, hence it is sensible to enable CDI by default when creating a Java EE application. However, there are several issues if CDI is enabled by default: scanning can be slow - not all libs use CDI (hence, scanning is not needed)" Another significant concern appears to be around backwards compatibility and conflict with other JSR 330 implementations like Spring: "I am leaning towards yes, however can easily imagine situations where errors would be caused by automatically activating CDI, especially in cases of backward compatibility where another DI engine (such as Spring and the like) happens to use the same mechanics to inject dependencies and in that case there would be an overlap in injections and probably an uncertain outcome" Some commenters such as this one attempt to suggest solutions to these potential issues: "If you have Spring in use and use javax.inject.Inject then you might get some unexpected behavior that could be equally confusing. I guess there will be a way to switch CDI off. I'm tempted to say yes but am cautious for this reason" Consistent Usage of @Inject The third question was around using CDI/JSR 330 @Inject consistently vs. allowing JSRs to create their own injection annotations. A slight majority of 53.3% developers supported using @Inject consistently across JSRs. 28.8% said using custom injection annotations is OK, while 18.0% were not sure. The vast majority of commenters were strongly supportive of CDI and general Java EE alignment with CDI as illistrated by these comments: "Dependency Injection should be standard from now on in EE. It should use CDI as that is the DI mechanism in EE and is quite powerful. Having a new JSR specific DI mechanism to deal with just means more reflection, more proxies. JSRs should also be constructed to allow some of their objects Injectable. @Inject @TransactionalCache or @Inject @JMXBean etc...they should define the annotations and stereotypes to make their code less procedural. Dog food it. If there is a shortcoming in CDI for a JSR fix it and we will all be grateful" "We're trying to make this a comprehensive platform, right? Injection should be a fundamental part of the platform; everything else should build on the same common infrastructure. Each-having-their-own is just a recipe for chaos and having to learn the same thing 10 different ways" Expanding the Use of @Stereotype The fourth question was about expanding CDI @Stereotype to cover annotations across Java EE beyond just CDI. A significant majority of 62.3% developers supported expanding the use of @Stereotype, only 13.3% opposed. A majority of commenters supported the idea as well as the theme of general CDI/Java EE alignment as expressed in these examples: "Just like defining new types for (compositions of) existing classes, stereotypes can help make software development easier" "This is especially important if many EJB services are decoupled from the EJB component model and can be applied via individual annotations to Java EE components. @Stateless is a nicely compact annotation. Code will not improve if that will have to be applied in the future as @Transactional, @Pooled, @Secured, @Singlethreaded, @...." Some, however, expressed concerns around increased complexity such as this commenter: "Could be very convenient, but I'm afraid if it wouldn't make some important class annotations less visible" Expanding Interceptor Use The final set of questions was about expanding interceptors further across Java EE... A very solid 96.3% of developers wanted to expand interceptor use to all Java EE components. 35.7% even wanted to expand interceptors to other Java EE managed classes. Most developers (54.9%) were not sure if there is any place that injection is supported that should not support interceptors. 32.8% thought any place that supports injection should also support interceptors. Only 12.2% were certain that there are places where injection should be supported but not interceptors. The comments reflected the diversity of opinions, generally supportive of interceptors: "I think interceptors are as fundamental as injection and should be available anywhere in the platform" "The whole usage of interceptors still needs to take hold in Java programming, but it is a powerful technology that needs some time in the Sun. Basically it should become part of Java SE, maybe the next step after lambas?" A distinct chain of thought separated interceptors from filters and listeners: "I think that the Servlet API already provides a rich set of possibilities to hook yourself into different Servlet container events. I don't find a need to 'pollute' the Servlet model with the Interceptors API"

  Read the article

• LINQ – SequenceEqual() method

  - by nmarun

  I have been looking at LINQ extension methods and have blogged about what I learned from them in my blog space. Next in line is the SequenceEqual() method. Here’s the description about this method: “Determines whether two sequences are equal by comparing the elements by using the default equality comparer for their type.” Let’s play with some code: 1: int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; 2: // int[] numbersCopy = numbers; 3: int[] numbersCopy = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; 4:  5: Console.WriteLine(numbers.SequenceEqual(numbersCopy)); This gives an output of ‘True’ – basically compares each of the elements in the two arrays and returns true in this case. The result is same even if you uncomment line 2 and comment line 3 (I didn’t need to say that now did I?). So then what happens for custom types? For this, I created a Product class with the following definition: 1: class Product 2: { 3: public int ProductId { get; set; } 4: public string Name { get; set; } 5: public string Category { get; set; } 6: public DateTime MfgDate { get; set; } 7: public Status Status { get; set; } 8: } 9:  10: public enum Status 11: { 12: Active = 1, 13: InActive = 2, 14: OffShelf = 3, 15: } In my calling code, I’m just adding a few product items: 1: private static List<Product> GetProducts() 2: { 3: return new List<Product> 4: { 5: new Product 6: { 7: ProductId = 1, 8: Name = "Laptop", 9: Category = "Computer", 10: MfgDate = new DateTime(2003, 4, 3), 11: Status = Status.Active, 12: }, 13: new Product 14: { 15: ProductId = 2, 16: Name = "Compact Disc", 17: Category = "Water Sport", 18: MfgDate = new DateTime(2009, 12, 3), 19: Status = Status.InActive, 20: }, 21: new Product 22: { 23: ProductId = 3, 24: Name = "Floppy", 25: Category = "Computer", 26: MfgDate = new DateTime(1993, 3, 7), 27: Status = Status.OffShelf, 28: }, 29: }; 30: } Now for the actual check: 1: List<Product> products1 = GetProducts(); 2: List<Product> products2 = GetProducts(); 3:  4: Console.WriteLine(products1.SequenceEqual(products2)); This one returns ‘False’ and the reason is simple – this one checks for reference equality and the products in the both the lists get different ‘memory addresses’ (sounds like I’m talking in ‘C’). In order to modify this behavior and return a ‘True’ result, we need to modify the Product class as follows: 1: class Product : IEquatable<Product> 2: { 3: public int ProductId { get; set; } 4: public string Name { get; set; } 5: public string Category { get; set; } 6: public DateTime MfgDate { get; set; } 7: public Status Status { get; set; } 8:  9: public override bool Equals(object obj) 10: { 11: return Equals(obj as Product); 12: } 13:  14: public bool Equals(Product other) 15: { 16: //Check whether the compared object is null. 17: if (ReferenceEquals(other, null)) return false; 18:  19: //Check whether the compared object references the same data. 20: if (ReferenceEquals(this, other)) return true; 21:  22: //Check whether the products' properties are equal. 23: return ProductId.Equals(other.ProductId) 24: && Name.Equals(other.Name) 25: && Category.Equals(other.Category) 26: && MfgDate.Equals(other.MfgDate) 27: && Status.Equals(other.Status); 28: } 29:  30: // If Equals() returns true for a pair of objects 31: // then GetHashCode() must return the same value for these objects. 32: // read why in the following articles: 33: // http://geekswithblogs.net/akraus1/archive/2010/02/28/138234.aspx 34: // http://stackoverflow.com/questions/371328/why-is-it-important-to-override-gethashcode-when-equals-method-is-overriden-in-c 35: public override int GetHashCode() 36: { 37: //Get hash code for the ProductId field. 38: int hashProductId = ProductId.GetHashCode(); 39:  40: //Get hash code for the Name field if it is not null. 41: int hashName = Name == null ? 0 : Name.GetHashCode(); 42:  43: //Get hash code for the ProductId field. 44: int hashCategory = Category.GetHashCode(); 45:  46: //Get hash code for the ProductId field. 47: int hashMfgDate = MfgDate.GetHashCode(); 48:  49: //Get hash code for the ProductId field. 50: int hashStatus = Status.GetHashCode(); 51: //Calculate the hash code for the product. 52: return hashProductId ^ hashName ^ hashCategory & hashMfgDate & hashStatus; 53: } 54:  55: public static bool operator ==(Product a, Product b) 56: { 57: // Enable a == b for null references to return the right value 58: if (ReferenceEquals(a, b)) 59: { 60: return true; 61: } 62: // If one is null and the other not. Remember a==null will lead to Stackoverflow! 63: if (ReferenceEquals(a, null)) 64: { 65: return false; 66: } 67: return a.Equals((object)b); 68: } 69:  70: public static bool operator !=(Product a, Product b) 71: { 72: return !(a == b); 73: } 74: } Now THAT kinda looks overwhelming. But lets take one simple step at a time. Ok first thing you’ve noticed is that the class implements IEquatable<Product> interface – the key step towards achieving our goal. This interface provides us with an ‘Equals’ method to perform the test for equality with another Product object, in this case. This method is called in the following situations: when you do a ProductInstance.Equals(AnotherProductInstance) and when you perform actions like Contains<T>, IndexOf() or Remove() on your collection Coming to the Equals method defined line 14 onwards. The two ‘if’ blocks check for null and referential equality using the ReferenceEquals() method defined in the Object class. Line 23 is where I’m doing the actual check on the properties of the Product instances. This is what returns the ‘True’ for us when we run the application. I have also overridden the Object.Equals() method which calls the Equals() method of the interface. One thing to remember is that anytime you override the Equals() method, its’ a good practice to override the GetHashCode() method and overload the ‘==’ and the ‘!=’ operators. For detailed information on this, please read this and this. Since we’ve overloaded the operators as well, we get ‘True’ when we do actions like: 1: Console.WriteLine(products1.Contains(products2[0])); 2: Console.WriteLine(products1[0] == products2[0]); This completes the full circle on the SequenceEqual() method. See the code used in the article here.

  Read the article

• Someone tried to hack my Node.js server, need to understand a GET request in the logs

  - by Akay

  Alright, so I left my Node.js server alone for a while and came back to find some really interesting stuff in the logs. Apparently some moron from China or Poland tried to hack my server using directory traversal and what not, while it seems though he did not succeed I am unable understand few entries in the log. This is the output of a "hohup.out" file. The attack starts, apparently he is trying to find out some console entry in my server. All of which fail and return a 404. [90mGET /../../../../../../../../../../../ [31m500 [90m6ms - 2b[0m [90mGET /<script>alert(53416)</script> [33m404 [90m7ms[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m1ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET /pz3yvy3lyzgja41w2sp [33m404 [90m1ms[0m [90mGET /stylesheets/style.css [33m404 [90m0ms[0m [90mGET /index.html [33m404 [90m1ms[0m [90mGET /index.htm [33m404 [90m0ms[0m [90mGET /default.html [33m404 [90m0ms[0m [90mGET /default.htm [33m404 [90m1ms[0m [90mGET /default.asp [33m404 [90m1ms[0m [90mGET /index.php [33m404 [90m0ms[0m [90mGET /default.php [33m404 [90m1ms[0m [90mGET /index.asp [33m404 [90m0ms[0m [90mGET /index.cgi [33m404 [90m0ms[0m [90mGET /index.jsp [33m404 [90m1ms[0m [90mGET /index.php3 [33m404 [90m0ms[0m [90mGET /index.pl [33m404 [90m0ms[0m [90mGET /default.jsp [33m404 [90m0ms[0m [90mGET /default.php3 [33m404 [90m0ms[0m [90mGET /index.html.en [33m404 [90m0ms[0m [90mGET /web.gif [33m404 [90m34ms[0m [90mGET /header.html [33m404 [90m1ms[0m [90mGET /homepage.nsf [33m404 [90m1ms[0m [90mGET /homepage.htm [33m404 [90m1ms[0m [90mGET /homepage.asp [33m404 [90m1ms[0m [90mGET /home.htm [33m404 [90m0ms[0m [90mGET /home.html [33m404 [90m1ms[0m [90mGET /home.asp [33m404 [90m1ms[0m [90mGET /login.asp [33m404 [90m0ms[0m [90mGET /login.html [33m404 [90m0ms[0m [90mGET /login.htm [33m404 [90m1ms[0m [90mGET /login.php [33m404 [90m0ms[0m [90mGET /index.cfm [33m404 [90m0ms[0m [90mGET /main.php [33m404 [90m1ms[0m [90mGET /main.asp [33m404 [90m1ms[0m [90mGET /main.htm [33m404 [90m1ms[0m [90mGET /main.html [33m404 [90m2ms[0m [90mGET /Welcome.html [33m404 [90m1ms[0m [90mGET /welcome.htm [33m404 [90m1ms[0m [90mGET /start.htm [33m404 [90m1ms[0m [90mGET /fleur.png [33m404 [90m0ms[0m [90mGET /level/99/ [33m404 [90m1ms[0m [90mGET /chl.css [33m404 [90m0ms[0m [90mGET /images/ [33m404 [90m0ms[0m [90mGET /robots.txt [33m404 [90m2ms[0m [90mGET /hb1/presign.asp [33m404 [90m1ms[0m [90mGET /NFuse/ASP/login.htm [33m404 [90m0ms[0m [90mGET /CCMAdmin/main.asp [33m404 [90m1ms[0m [90mGET /TiVoConnect?Command=QueryServer [33m404 [90m1ms[0m [90mGET /admin/images/rn_logo.gif [33m404 [90m1ms[0m [90mGET /vncviewer.jar [33m404 [90m1ms[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m7ms - 240b[0m [90mOPTIONS / [32m200 [90m1ms - 3b[0m [90mTRACE / [33m404 [90m0ms[0m [90mPROPFIND / [33m404 [90m0ms[0m [90mGET /\./ [33m404 [90m1ms[0m But here is when things start getting fishy. [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m1ms - 240b[0m [90mGET /robots.txt [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m3ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://37.28.156.211/sprawdza.php [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mHEAD / [32m200 [90m1ms - 240b[0m [90mGET http://www.daydaydata.com/proxy.txt [33m404 [90m19ms[0m [90mHEAD / [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m2ms[0m [90mGET / [32m200 [90m4ms - 240b[0m [90mGET http://www.google.pl/search?q=wp.pl [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mHEAD / [32m200 [90m2ms - 240b[0m [90mGET http://www.google.pl/search?q=onet.pl [33m404 [90m1ms[0m [90mHEAD / [32m200 [90m2ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://www.google.pl/search?q=ostro%C5%82%C4%99ka [33m404 [90m1ms[0m [90mGET http://www.google.pl/search?q=google [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mHEAD / [32m200 [90m2ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET http://www.baidu.com/ [32m200 [90m2ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mPOST /api/login [32m200 [90m1ms - 28b[0m [90mGET /web-console/ServerInfo.jsp [33m404 [90m2ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m10ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://proxyjudge.info [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m3ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m3ms - 240b[0m [90mGET http://www.baidu.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mHEAD / [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/search?tbo=d&source=hp&num=1&btnG=Search&q=niceman [33m404 [90m2ms[0m So my questions are, how come my server is returning a "200" OK for root level domains? How did the hacker even manage to send a GET request to my server such that "http://www.google.com" shows up in the log while my server is simply an API that works on relative URLs such as "/api/login". And, while I looked up the OPTIONS, TRACE and PROPFIND HTTP requests that my server has logged it would be great if someone could explain what exactly was the hacker trying to achieve by using these verbs? Also what in the world does "[90m [32m [90m1ms - 240b[0m" mean? The "ms" makes sense, probably milliseconds for the request, rest I am unable to understand. Thank you!

  Read the article

• 11gR2???---gipc????

  - by Allen Gao

  Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id=ieooui st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} ??????,????11gR2 ??????gipcd(????ora.gipcd)????,????gipc???,????????????? ????,??oracle????,??????????,??????????,???????????cache fusion ?????????????,?????????????oracle????????????,??????,???????(?????????Note 220970.1:RAC: Frequently Asked Questions,?????????)???????,???????????/????,?????????????? ??,?10gR2 ?11gR1????,?????????????,??:Linux bonding, AIX EtherChannel, HP-UX APA ???????????????????????????????(??,????????????????,???????)???????10g ?11.1 ??????,??????????????????(???????),????????????????subnet??????,????,?????oracle???????????,??????????????,???????????,??????????????,??????????????????????,??:????,?????? ?????????,?11gR2??(????,?11.2.0.2??),oracle??????????????,?????gipc(Grid IPC)???,??????????gipcd.bin?????????,??????? 1. ??????,????????????,?????????,?????????gpnp profile??????????????????? 2. ???????????,??????????,???????????????? 3. ?????????????,?????????/???????????,????????,???????? ??,oracle????????????????????????/??????,??,?????????? ??,???????????????,?????gipc ?HAIP????????????,??????????????,???????????????????:?????????,??:ocssd.bin????,crsd.bin??????;???:oracle RAC ??,??:ASM ??????,?????????????,?????????????????????gipc,???????????,?????????????????????,????????????????,?????,????????????,??,?????????????????gipc???,oracle ??????????????,??????????????,????????????????,HAIP ????,????oracle RAC??????/?????????,????????????????,????,????????HAIP?????,????????????ASM??,?????(???NM??)??????????,?????????????????HAIP,????????,????,???????? “Redundant Interconnect with Highly Available IP (HAIP) ??”? ???,???????????????????????? 1.??????gipcd.log 2013-07-17 12:28:28.071: [ default][3041003216]gipcd START pid=22337 Oracle Grid IPC Daemon 2013-07-17 12:28:28.072: [ GIPCD][3041003216] gipcdMain: gipcd Started <<<<<< gipcd????????? …… 2013-07-17 12:28:29.046: [ GPNP][3041003216]clsgpnp_getCachedProfileEx: [at clsgpnp.c:613] Result: (26) CLSGPNP_NO_PROFILE. Can't get offline GPnP service profile: local gpnpd is up and running. Use getProfile instead. 2013-07-17 12:28:29.046: [ GPNP][3041003216]clsgpnp_getCachedProfileEx: [at clsgpnp.c:623] Result: (26) CLSGPNP_NO_PROFILE. Failed to get offline GPnP service profile. 2013-07-17 12:28:29.066: [ GPNP][3041003216]clsgpnpm_newWiredMsg: [at clsgpnpm.c:741] Msg-reply has soap fault 10 (Operation returned Retry (error CLSGPNP_CALL_AGAIN)) [uri "http://www.grid-pnp.org/2005/12/gpnp-errors#"] <<<< gipcd ????gpnp profile?????????log??GI??????,?????????,?????gpnpd???????? …… 2013-07-17 12:28:39.342: [ CLSINET][3023027088] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 12:28:39.342: [ CLSINET][3023027088] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' <<<<< gipcd ????????????????,???????2??????????? …… 2013-07-17 12:28:39.344: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.30' 2013-07-17 12:28:39.344: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.30:46782' 2013-07-17 12:28:39.345: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.31' 2013-07-17 12:28:39.345: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.31:39332' <<<<<<< gipcd ????????(????????????????)?endpoint ????? …… 2013-07-17 12:28:56.767: [GIPCHGEN][3023027088] gipchaNodeCreate: adding new node 0x9c107d8 { host 'single2', haName 'gipcd_ha_name', srcLuid 465fb26d-8b46eb95, dstLuid 00000000-00000000 numInf 0, contigSeq 0, lastAck 0, lastValidAck 0, sendSeq [0 : 0], createTime 797327224, flags 0x0 } <<<<< ???????? …… 2013-07-17 12:28:58.415: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created remote interface for node 'single2', haName 'gipcd_ha_name', inf 'udp://192.168.254.33:16663' 2013-07-17 12:28:58.415: [GIPCHGEN][3025128336] gipchaWorkerAttachInterface: Interface attached inf 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x6 } 2013-07-17 12:28:58.415: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created remote interface for node 'single2', haName 'gipcd_ha_name', inf 'udp://192.168.254.32:17578' 2013-07-17 12:28:58.415: [GIPCHGEN][3025128336] gipchaWorkerAttachInterface: Interface attached inf 0x9c0a900 { host 'single2', haName 'gipcd_ha_name', local 0xb4cb8eb8, ip '192.168.254.32:17578', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x6 } <<<<<< gipcd ??????????????? …… 2013-07-17 12:29:36.120: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth1 - rank 99, avgms 6.326531 [ 257 / 250 / 245 ] 2013-07-17 12:29:36.120: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 1] eth2 - rank 99, avgms 5.182186 [ 259 / 250 / 247 ] <<<<<gipcd ??????????? ……  2. ?????????down???gipcd.log? 2013-07-17 13:23:20.346: [ CLSINET][3027229584] Returning NETDATA: 2 interfaces 2013-07-17 13:23:20.346: [ CLSINET][3027229584] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:20.346: [ CLSINET][3027229584] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:20.359: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth1 - rank 99, avgms 1.560694 [ 171 / 173 / 173 ] 2013-07-17 13:23:20.359: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 1] eth2 - rank 99, avgms 1.802326 [ 172 / 172 / 172 ] <<<<<<<< gipcd ?????????? …… +++????“ifconfig eth1 down”????????????? …… 2013-07-17 13:23:44.397: [ CLSINET][3027229584] # 0 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:44.397: [GIPCDMON][3027229584] gipcdMonitorUpdate: interface went down - [ ip 192.168.254.30, subnet 192.168.254.0, mask 255.255.255.0 ] 2013-07-17 13:23:44.397: [GIPCDMON][3027229584] gipcdMonitorUpdate: msg sent to client thread (([update(ip: 192.168.254.30, mask: 255.255.255.0, subnet 192.168.254.0), state(gipcdadapterstateDown)])) <<<<<<<< gipcd ????eth1 down?,???????(??:ocssd.bin)????? …… 2013-07-17 13:23:44.426: [GIPCHGEN][3025128336] gipchaInterfaceDisable: disabling interface 0xb4c4e590 { host '', haName 'gipcd_ha_name', local (nil), ip '192.168.254.30', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 1, flags 0x1cd } 2013-07-17 13:23:44.428: [GIPCHGEN][3025128336] gipchaInterfaceDisable: disabling interface 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x86 } 2013-07-17 13:23:44.428: [GIPCHALO][3025128336] gipchaLowerCleanInterfaces: performing cleanup of disabled interface 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0xa6 } <<<<<<<<gipcd ????????eth1 ???,????????????????????? …… 2013-07-17 13:24:08.747: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth2 - rank 99, avgms 1.955307 [ 204 / 181 / 179 ] <<<<<<<gipcd ???????????? ??:??????,??????????????????,????????????????,???????????eth1??HAIP,?failover?eth2 ?,????,????ASM??????? 3. ???eht1???? ++ ????”ifconfig eth1 up”????eth1 2013-07-17 13:36:31.260: [GIPCDMON][3027229584] gipcdMonitorUpdate: New Interface found - [ ip 192.168.254.30, subnet 192.168.254.0, mask 255.255.255.0 ] 2013-07-17 13:36:31.260: [GIPCDMON][3027229584] gipcdMonitorUpdate: msg sent to client thread (([update(ip: 192.168.254.30, mask: 255.255.255.0, subnet 192.168.254.0), state(gipcdadapterstateUp)])) <<<<< gpicd ?????????? …… 2013-07-17 13:36:31.471: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.30' 2013-07-17 13:36:31.471: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.30:55548' <<<<<< ?????endpoint???? …… 2013-07-17 13:37:11.493: [ CLSINET][3027229584] Returning NETDATA: 2 interfaces 2013-07-17 13:37:11.493: [ CLSINET][3027229584] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:37:11.493: [ CLSINET][3027229584] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:37:11.510: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth2 - rank 99, avgms 6.141304 [ 307 / 184 / 184 ] <<<<<<<< <<<<<<<< gipcd??????? ??:??????,??????????????????,????????????????,????????failover?eth2??HAIP,?????eth1 ?,????,????ASM??????? ??,????????,gipcd ???????????,??,????????,?????????(????)????,gipcd???????????,??????HAIP???,???????????????(??:Linux bonding,etherchannel?),???????????,????????? ??????????????11gR2 ??????gipcd????,????????????,?????????? ??????????,???????????,??“??:11gR2???---gipc????"?

  Read the article

• ???? ????? ????? ?????? ????? 10.2.0.4

  - by gadi.chen

  Normal 0 false false false EN-US X-NONE HE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} DBA's ?????? ?????? ???? ??? ????? ??? ?????? ???? ????? ????? ??? ?????. ??? ????? ???? ????? ???? ??????? 30-Apr-2011  ???? ???? ?????? ????? ???? ??????? 10.2.0.4. ?????? ????? EBS ?? ????? ????? ????? ????? ??? ??? ???? ????? ?????? extended support, ???? ???? 11.5.10.2 ??? ???? ? 01-Dec-2011 . ) ????? ?????? ????  Minimum Baseline For Extended Support ????? ?????: 883202.1) ???? ????? ????? ?????? ?????? ?? ????? ????? ????? ????????? ???? ?? :   # ATG.RUP6 # Forms6i Patchset 19 # JRE 1.6.0_03       ???? ???? ?????? EBS ?? ????? ?????? ?????? ????? ???? ?????? ?? ,?? ??? ????? ?? ???? ??????.   ????? ???? 10.2.0.4 ?? ???? ?patches ????? ????  30-Apr-2011 . ???? ????  patches ????? ?? ????? ????? 10.2.0.5   .   ???? ????? EBS ????? 3 ?????? ?????? ?? ???: 1.      ????? ????? 11.2.0.2 - ??? ???? ????? ??????? ?????? ??? EBS ??????? 11i   ? R12 2.      ????? ????? 11.1.0.7 -  ??? ???? ????? ?????? ????? ????? 11.1 ??? ?????. 3.      ?????/????? patch 10.2.0.5 -   ???? ????? ?????? ????? ?????? ????? 10gR2 . v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE HE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}   ?????? ??????? ???? ??????:     http://blogs.oracle.com/stevenChan/2011/01/ecs_10gr2_10204.html On Database Patching and Support: A Primer for E-Business Suite Users Oracle Database 10.2 End of Premier Support -- Frequently Asked Questions (Note 1130327.1)        

  Read the article

• Sharepoint web services -- The HTTP request is unauthorized with client authentication scheme 'Ntlm'

  - by Pandincus

  I know there's a lot of questions on SO similar to this, but I couldn't find one for this particular issue. A couple of points, first: I have no control over our Sharepoint server. I cannot tweak any IIS settings. I believe our IIS server version is IIS 7.0. Our Sharepoint Server is anticipating requests via NTLM. Our Sharepoint Server is on the same domain as my client computer. I am using .NET Framework 3.5, Visual Studio 2008 I am trying to write a simple console app to manipulate Sharepoint data using Sharepoint Web Services. I have added the Service Reference, and the following is my app.config: <system.serviceModel> <bindings> <basicHttpBinding> <binding name="ListsSoap" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="Transport"> <transport clientCredentialType="Ntlm" proxyCredentialType="Ntlm" /> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="https://subdomain.companysite.com/subsite/_vti_bin/Lists.asmx" binding="basicHttpBinding" bindingConfiguration="ListsSoap" contract="ServiceReference1.ListsSoap" name="ListsSoap" /> </client> </system.serviceModel> This is my code: static void Main(string[] args) { using (var client = new ListsSoapClient()) { client.ClientCredentials.Windows.ClientCredential = new NetworkCredential("username", "password", "domain"); client.GetListCollection(); } } When I call GetListCollection(), the following MessageSecurityException gets thrown: The HTTP request is unauthorized with client authentication scheme 'Ntlm'. The authentication header received from the server was 'NTLM'. With an inner WebException: "The remote server returned an error: (401) Unauthorized." I've tried various bindings and various code tweaks to try to authenticate properly, but to no avail. I'll list those below. I've tried the following steps: Using a native Win32 Impersonator before creating the client using (new Impersonator.Impersonator("username", "password", "domain")) using (var client = new ListsSoapClient()) { client.ClientCredentials.Windows.ClientCredential = new NetworkCredential("dpincas", "password", "domain"); client.GetListCollection(); } This produced the same error message. Setting TokenImpersonationLevel for my client credentials using (var client = new ListsSoapClient()) { client.ClientCredentials.Windows.AllowedImpersonationLevel = TokenImpersonationLevel.Impersonation; client.GetListCollection(); } This produced the same error message. Using security mode=TransportCredentialOnly <security mode="TransportCredentialOnly"> <transport clientCredentialType="Ntlm" /> </security> This resulted in a different error message: The provided URI scheme 'https' is invalid; expected 'http'. Parameter name: via However, I need to use https, so I cannot change my URI scheme. I've tried some other combinations that I can't remember, but I'll post them when I do. I'm really at wits end here. I see a lot of links on Google that say "switch to Kerberos", but my server seems to only be accepting NTLM, not "Negotiate" (as it would say if it was looking for Kerberos), so that is unfortunately not an option. Any help out there, folks?

  Read the article

• EF4 POCO WCF Serialization problems (no lazy loading, proxy/no proxy, circular references, etc)

  - by kdawg

  OK, I want to make sure I cover my situation and everything I've tried thoroughly. I'm pretty sure what I need/want can be done, but I haven't quite found the perfect combination for success. I'm utilizing Entity Framework 4 RTM and its POCO support. I'm looking to query for an entity (Config) that contains a many-to-many relationship with another entity (App). I turn off lazy loading and disable proxy creation for the context and explicitly load the navigation property (either through .Include() or .LoadProperty()). However, when the navigation property is loaded (that is, Apps is loaded for a given Config), the App objects that were loaded already contain references to the Configs that have been brought to memory. This creates a circular reference. Now I know the DataContractSerializer that WCF uses can handle circular references, by setting the preserveObjectReferences parameter to true. I've tried this with a couple of different attribute implementations I've found online. It is needed to prevent the "the object graph contains circular references and cannot be serialized" error. However, it doesn't prevent the serialization of the entire graph, back and forth between Config and App. If I invoke it via WcfTestClient.exe, I get a stackoverflow (ha!) exception from the client and I'm hosed. I get different results from different invocation environments (C# unit test with a local reference to the web service appears to work ok though I still can drill back and forth between Configs and Apps endlessly, but calling it from a coldfusion environment only returns the first Config in the list and errors out on the others.) My main goal is to have a serialized representation of the graph I explicitly load from EF (ie: list of Configs, each with their Apps, but no App back to Config navigation.) NOTE: I've also tried using the ProxyDataContractResolver technique and keeping the proxy creation enabled from my context. This blows up complaining about unknown types encountered. I read that the ProxyDataContractResolver didn't fully work in Beta2, but should work in RTM. For some reference, here is roughly how I'm querying the data in the service: var repo = BootStrapper.AppCtx["AppMeta.ConfigRepository"] as IRepository<Config>; repo.DisableLazyLoading(); repo.DisableProxyCreation(); //var temp2 = repo.Include(cfg => cfg.Apps).Where(cfg => cfg.Environment.Equals(environment)).ToArray(); var temp2 = repo.FindAll(cfg => cfg.Environment.Equals(environment)).ToArray(); foreach (var cfg in temp2) { repo.LoadProperty(cfg, c => c.Apps); } return temp2; I think the crux of my problem is when loading up navigation properties for POCO objects from Entity Framework 4, it prepopulates navigation properties for objects already in memory. This in turn hoses up the WCF serialization, despite every effort made to properly handle circular references. I know it's a lot of information, but it's really standing in my way of going forward with EF4/POCO in our system. I've found several articles and blogs touching upon these subjects, but for the life of me, I cannot resolve this issue. Feel free to simply ask questions and help me brainstorm this situation. PS: For the sake of being thorough, I am injecting the WCF services using the HEAD build of Spring.NET for the fix to Spring.ServiceModel.Activation.ServiceHostFactory. However I don't think this is the source of the problem.

  Read the article

• The model item passed into the dictionary is of type ‘mvc.Models.ModelA’ but this dictionary require

  - by Malcolm Frexner

  I have this annoying mistake in some of my builds. There is no error in the project, because if I build again, then the problem disappears. The message only appears, when the site is deployed to a Windows 2008 Server. I first thought that it might be an issue with temporary files, but thats not the case. I deployed the build to a different web and the error still appears. The error appears on random actions of the site. Most of the time builds are ok, but each 3rd or 4th build produces runtime errors. I build using a WebdeploymentProject in release mode. Views are precompiled. It's not http://stackoverflow.com/questions/178194/in-asp-net-mvc-i-encounter-an-incorrect-type-error-when-rendering-a-page-with-the, because views have totally different names. How I can debug this problem or how I can get help for this? Here is my WebDeploymentProject <!-- Microsoft Visual Studio 2008 Web Deployment Project http://go.microsoft.com/fwlink/?LinkID=104956 --> <Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration> <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform> <ProductVersion>9.0.21022</ProductVersion> <SchemaVersion>2.0</SchemaVersion> <ProjectGuid>{E5E14CEB-0BCD-4203-9A5A-34ABA9C717EA}</ProjectGuid> <SourceWebPhysicalPath>..\B2CWeb</SourceWebPhysicalPath> <SourceWebProject>{3E632DB6-6DB3-4BD0-8CCA-12DE67165B48}|B2CWeb\B2CWeb.csproj</SourceWebProject> <SourceWebVirtualPath>/B2CWeb.csproj</SourceWebVirtualPath> <TargetFrameworkVersion>v3.5</TargetFrameworkVersion> </PropertyGroup> <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' "> <DebugSymbols>true</DebugSymbols> <OutputPath>.\Debug</OutputPath> <EnableUpdateable>false</EnableUpdateable> <UseMerge>true</UseMerge> <SingleAssemblyName>B2CWeb_Build</SingleAssemblyName> </PropertyGroup> <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' "> <DebugSymbols>false</DebugSymbols> <OutputPath>..\B2CWeb_Deploy\</OutputPath> <EnableUpdateable>false</EnableUpdateable> <UseMerge>true</UseMerge> <SingleAssemblyName>B2C_Web</SingleAssemblyName> <ContentAssemblyName> </ContentAssemblyName> <DeleteAppCodeCompiledFiles>false</DeleteAppCodeCompiledFiles> </PropertyGroup> <ItemGroup> </ItemGroup> <Import Project="$(MSBuildExtensionsPath)\Microsoft\WebDeployment\v9.0\Microsoft.WebDeployment.targets" /> <!-- To modify your build process, add your task inside one of the targets below and uncomment it. Other similar extension points exist, see Microsoft.WebDeployment.targets. <Target Name="BeforeBuild"> </Target> <Target Name="BeforeMerge"> </Target> <Target Name="AfterMerge"> </Target> <Target Name="AfterBuild"> </Target> --> </Project>

  Read the article

• Creating a multi-tenant application using PostgreSQL's schemas and Rails

  - by ramon.tayag

  Stuff I've already figured out I'm learning how to create a multi-tenant application in Rails that serves data from different schemas based on what domain or subdomain is used to view the application. I already have a few concerns answered: How can you get subdomain-fu to work with domains as well? Here's someone that asked the same question which leads you to this blog. What database, and how will it be structured? Here's an excellent talk by Guy Naor, and good question about PostgreSQL and schemas. I already know my schemas will all have the same structure. They will differ in the data they hold. So, how can you run migrations for all schemas? Here's an answer. Those three points cover a lot of the general stuff I need to know. However, in the next steps I seem to have many ways of implementing things. I'm hoping that there's a better, easier way. Finally, to my question When a new user signs up, I can easily create the schema. However, what would be the best and easiest way to load the structure that the rest of the schemas already have? Here are some questions/scenarios that might give you a better idea. Should I pass it on to a shell script that dumps the public schema into a temporary one, and imports it back to my main database (pretty much like what Guy Naor says in his video)? Here's a quick summary/script I got from the helpful #postgres on freenode. While this will probably work, I'm gonna have to do a lot of stuff outside of Rails, which makes me a bit uncomfortable.. which also brings me to the next question. Is there a way to do this straight from Ruby on Rails? Like create a PostgreSQL schema, then just load the Rails database schema (schema.rb - I know, it's confusing) into that PostgreSQL schema. Is there a gem/plugin that has these things already? Methods like "create_pg_schema_and_load_rails_schema(the_new_schema_name)". If there's none, I'll probably work at making one, but I'm doubtful about how well tested it'll be with all the moving parts (especially if I end up using a shell script to create and manage new PostgreSQL schemas). Thanks, and I hope that wasn't too long! UPDATE May 11, 2010 11:26 GMT+8 Since last night I've been able to get a method to work that creates a new schema and loads schema.rb into it. Not sure if what I'm doing is correct (seems to work fine, so far) but it's a step closer at least. If there's a better way please let me know. module SchemaUtils def self.add_schema_to_path(schema) conn = ActiveRecord::Base.connection conn.execute "SET search_path TO #{schema}, #{conn.schema_search_path}" end def self.reset_search_path conn = ActiveRecord::Base.connection conn.execute "SET search_path TO #{conn.schema_search_path}" end def self.create_and_migrate_schema(schema_name) conn = ActiveRecord::Base.connection schemas = conn.select_values("select * from pg_namespace where nspname != 'information_schema' AND nspname NOT LIKE 'pg%'") if schemas.include?(schema_name) tables = conn.tables Rails.logger.info "#{schema_name} exists already with these tables #{tables.inspect}" else Rails.logger.info "About to create #{schema_name}" conn.execute "create schema #{schema_name}" end # Save the old search path so we can set it back at the end of this method old_search_path = conn.schema_search_path # Tried to set the search path like in the methods above (from Guy Naor) # conn.execute "SET search_path TO #{schema_name}" # But the connection itself seems to remember the old search path. # If set this way, it works. conn.schema_search_path = schema_name # Directly from databases.rake. # In Rails 2.3.5 databases.rake can be found in railties/lib/tasks/databases.rake file = "#{Rails.root}/db/schema.rb" if File.exists?(file) Rails.logger.info "About to load the schema #{file}" load(file) else abort %{#{file} doesn't exist yet. It's possible that you just ran a migration!} end Rails.logger.info "About to set search path back to #{old_search_path}." conn.schema_search_path = old_search_path end end

  Read the article

• IE8 losing session cookies in popup windows.

  - by HackedByChinese

  We have an ASP.NET application that uses Forms Auth. When users log in, a session ID cookie and a Forms Auth ticket (stored as a cookie) are generated. These are session cookies, not permanent cookies. It is intentional and desirable that when the browser closes, the user is effectively logged out. Once a user logs in, a new window is popped up using window.open('location here');. The page that is opened is effectively the workspace the user works in throughout the rest of their session. From this page, other pop-ups are also used. Lately, we've had a number of customers (all using latest versions of IE8) complaining that the when they log in, the initial pop-up takes them back to the log in screen rather than their homepage. Alternately, users can sometimes log in, get to the homepage (which again, is in a new pop up window), and it all seems fine, until any additional pop-ups are created, where it starts redirecting them to the log in screen again. In attempting to troubleshoot the issue, I've used good old Fiddler. When the problem starts manifesting, I've noticed that the browser is not sending up the ASP.NET session ID session cookie OR the Forms Auth ticket session cookie, even though the response to the log in POST clearly pushes down those cookies. What's more strange is if I CTRL+N to open a new window from the popped-up window that is missing the session cookies, then manually type in the URL to the home page, those cookies magically appear again. However, subsequent window.open(); calls will continue to be broken, not sending the session cookies and taking the user to the log in screen. It's important to note that sometimes, for seemingly no good reason, those same users can suddenly log in and work normally for a while, then it goes back to broken. Now, I've ensured that there are no browser add-ons, plug-ins, toolbars, etc. are running. I've added our site as a trusted site and dropped the security settings to Low, I've modified the Cookie Privacy policy to "accept all" and even disabled automatic policy settings, manually forcing it to accept everything and include session cookies. Nothing appears to affect it. Also note the web application resides on a single server. There is no load balancing, web gardens, server farms, clusters, etc. The server does reside behind an ISA server, but other than that it's pretty straight forward. I've been searching around for days and haven't found anything actionable. Heck, sometimes I can't even reproduce it reliably. I have found a few references to people having this same problem, but they seem to be referencing an issue that was allegedly fixed in a beta or RC release (example: http://stackoverflow.com/questions/179260/ie8-loses-cookies-when-opening-a-new-window-after-a-redirect). These are release versions of IE, with up-to-date patches. I'm aware that I can try to set permanent cookies instead of session cookies. However, this has drastic security implications for our application. Update It seems that the problem automagically goes away when the user is added as a Local Administrator on the machine. Only time will tell if this change permanently (and positively) affects this problem. Time to bust out ProcMon and see if there is a resource access problem.

  Read the article

• Add collection or array to wpf resource dictionary

  - by Chris Cap

  I've search high and low and can't find an answer to this. I have two questions How do you create an array or collection in XAML. I've got an array I want to stick in there and bind to a combo box. My first idea was to put an ItemsControl in a resource dictionary, but the ItemsSource of a combo box expects IEnumerable so that didn't work. Here's what I've tried in my resource dictionary and neither works <ItemsControl x:Key="stateList"> <sys:String>AL</sys:String> <sys:String>CA</sys:String> <sys:String>CN</sys:String> </ItemsControl> <ItemsControl x:Key="stateList2"> <ComboBoxItem>AL</ComboBoxItem> <ComboBoxItem>CA</ComboBoxItem> <ComboBoxItem>CN</ComboBoxItem> </ItemsControl> and here's how I bind to it <ComboBox SelectedValue="{Binding Path=State}" ItemsSource="{Binding Source={StaticResource stateList2}}" > </ComboBox> EDIT: UPDATED I got this first part to work this way <col:ArrayList x:Key="stateList3"> <sys:String>AL</sys:String> <sys:String>CA</sys:String> <sys:String>CN</sys:String> </col:ArrayList> However, I'd rather not use an array list, I'd like to use a generic list so if anyone knows how please let me know. EDIT UPDATE: I guess XAML has very limited support for generics so maybe an array list is the best I can do for now, but I would still like help on the second question if anyone has an anser 2nd. I've tried referencing a merged resource dictionary in my XAML and had problems because under Window.resources I had more than just the dictionary so it required me to add x:Key. Once I add the key, the system can no longer find the items in my resource dictionary. I had to move the merged dictionary to Grid.Resources instead. Ideally I'd like to reference the merged dictionary in the app.xaml but I have the same problem Here's some sample code. This first part required an x:key to compile because I have converter and it complained that every item must have a key if there is more than one <UserControl.Resources> <win:BooleanToVisibilityConverter x:Key="VisibilityConverter" /> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="/ResourcesD.xaml" /> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </UserControl.Resources> I had to change it to this <UI:BaseStep.Resources> <win:BooleanToVisibilityConverter x:Key="VisibilityConverter" /> </UI:BaseStep.Resources> <Grid> <Grid.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="/ResourcesD.xaml" /> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </Grid.Resources> </Grid> Thank you

  Read the article

• jQuery Validate - require at least one field in a group to be filled

  - by Nathan Long

  I'm using the excellent jQuery Validate Plugin to validate some forms. On one form, I need to ensure that the user fills in at least one of a group of fields. I think I've got a pretty good solution, and wanted to share it. Please suggest any improvements you can think of. Finding no built-in way to do this, I searched and found Rebecca Murphey's custom validation method, which was very helpful. I improved this in three ways: To let you pass in a selector for the group of fields To let you specify how many of that group must be filled for validation to pass To show all inputs in the group as passing validation as soon as one of them passes validation. So you can say "at least X inputs that match selector Y must be filled." The end result is a rule like this: partnumber: { require_from_group: [2,".productinfo"] } //The partnumber input will validate if //at least 2 `.productinfo` inputs are filled For best results, put this rule AFTER any formatting rules for that field (like "must contain only numbers", etc). This way, if the user gets an error from this rule and starts filling out one of the fields, they will get immediate feedback about the formatting required without having to fill another field first. Item #3 assumes that you're adding a class of .checked to your error messages upon successful validation. You can do this as follows, as demonstrated here. success: function(label) { label.html(" ").addClass("checked"); } As in the demo linked above, I use CSS to give each span.error an X image as its background, unless it has the class .checked, in which case it gets a check mark image. Here's my code so far: jQuery.validator.addMethod("require_from_group", function(value, element, options) { // From the options array, find out what selector matches // our group of inputs and how many of them should be filled. numberRequired = options[0]; selector = options[1]; var commonParent = $(element).parents('form'); var numberFilled = 0; commonParent.find(selector).each(function(){ // Look through fields matching our selector and total up // how many of them have been filled if ($(this).val()) { numberFilled++; } }); if (numberFilled >= numberRequired) { // This part is a bit of a hack - we make these // fields look like they've passed validation by // hiding their error messages, etc. Strictly speaking, // they haven't been re-validated, though, so it's possible // that we're hiding another validation problem. But there's // no way (that I know of) to trigger actual re-validation, // and in any case, any other errors will pop back up when // the user tries to submit the form. // If anyone knows a way to re-validate, please comment. // // For imputs matching our selector, remove error class // from their text. commonParent.find(selector).removeClass('error'); // Also look for inserted error messages and mark them // with class 'checked' var remainingErrors = commonParent.find(selector) .next('label.error').not('.checked'); remainingErrors.text("").addClass('checked'); // Tell the Validate plugin that this test passed return true; } // The {0} in the next line is the 0th item in the options array }, jQuery.format("Please fill out at least {0} of these fields.")); Questions? Comments?

  Read the article

• UpdatePanel, JavaScript postback and changing querystring at same time in SharePoint Search Page

  - by Lee Dale

  Hi Guys, Been tearing my hear out with this one. Let me see if I can explain: I have a SharePoint results page on which I have a Search Results Core WebPart. Now I want to change the parameter in the querystring when I postback the page so that the WebPart returns different results for each parameter e.g. the querystring will be interactivemap.aspx?k=Country:Romania this will filter the results for Romania. First issue is I want to do this with javascript so I call: document.getElementById('aspnetForm').action = "interactivemap.aspx?k=Country:" + country; Nothing special here but the reason I need to call from Javascript is there is also a flash applet on this page from which the Javascript calls originate. When the javascript calls are made the page needs to PostBack but not reload the flash applet. I turned to ASP.Net AJAX for this so I wrapped the search results webpart in an update panel. Now if I use a button within the UpdatePanel to postback the UpdatePanel behaves as expected and does a partial render of the search results webpart not reloading the flash applet. Problem comes because I need postback the page from javscript. I called __doPostBack() as I have used this successully in the past. It works on it's own but fails when I first call the above Javascript before the __doPostBack() (I also tried calling click() on a hidden button) the code for the page is at the bottom. I think the problem comes with the scriptmanager not allowing a partial render when the form post action has changed. My questions are. A) Is there some other way to change the search results webpart parameter without using the querystring. or B) Is there a way around changing the querystring when doing an AJAX postback and getting a partial render. <asp:Content ContentPlaceHolderID="PlaceHolderFullContent" runat="server"> function update(country) { //__doPostBack('ContentUpdatePanel', ''); //document.getElementById('aspnetForm').action = "interactivemap.aspx?k=ArticleCountry:" + country; document.getElementById('ctl00_PlaceHolderFullContent_UpdateButton').click(); } Romania <div class="firstDataTitle"> <div class="datatabletitleOuterWrapper"> <div class="datatabletitle"> <span>Content</span></div> </div> <div class="datatableWrapper"> <div class="dataHolderWrapper"> <div class="datatable"> <div> <div class="searchMain"> <div class="searchZoneMain"> <asp:UpdatePanel runat="server" id="ContentUpdatePanel" UpdateMode="Conditional"> <ContentTemplate> <WebPartPages:webpartzone runat="server" AllowPersonalization="false" title="<%$Resources:sps,LayoutPageZone_BottomZone%>" id="BottomZone" orientation="Vertical" QuickAdd-GroupNames="Search" QuickAdd-ShowListsAndLibraries="false"><ZoneTemplate></ZoneTemplate></WebPartPages:webpartzone> <asp:Button id="UpdateButton" name="UpdateButton" runat="server" Text="Update"/> </ContentTemplate> </asp:UpdatePanel> </div> </div> </div> </div> </div> </div>

  Read the article

• protobuf-net: Issues deserializing DataMember fields in lieu of read-only property

  - by Paul Smith

  I'm having issues deserializing certain properties of ORM-generated entities using protobuf-net. I suspect something in the way the ORM manages serialization attributes on read-only properties (uses public backing fields with DataMember attributes & [de]serializes) those instead of the corresponding read-only property, which has an IgnoreDataMember attribute). Guid properties might have issues of their own, but the field vs. property thing is my working theory now. Here's a simplified example of the code. Say I have a class, Account with an AccountID read-only guid, and an AccountName read-write string. I serialize & immediately deserialize a clone. In this scenario I get one of two results (depending on the entity, haven't isolated the specific commonality yet). The deserialized clone either: ...has a different AccountID from the original, or ...throws an Incorrect wire-type deserializing Guid exception while deserializing. Here's example usage... Account acct = new Account() { AccountName = "Bob's Checking" }; Debug.WriteLine(acct.AccountID.ToString()); using (MemoryStream ms = new MemoryStream()) { ProtoBuf.Serializer.Serialize<Account>(ms, acct); Debug.WriteLine(Encoding.UTF8.GetString(ms.GetBuffer())); ms.Position = 0; Account clone = ProtoBuf.Serializer.Deserialize<Account>(ms); Debug.WriteLine(clone.AccountID.ToString()); } And here's an example ORM'd class (simplified; hopefully haven't removed the cause of the issue in the process). Uses a shell game to deserialize read-only properties by exposing the backing field ("can't write" essentially becomes "shouldn't write," but we can scan code for instances of assigning to these fields, so the hack works for our purposes): [DataContract()] [Serializable()] public partial class Account { public Account() { _accountID = Guid.NewGuid(); } [XmlAttribute("AccountID")] [DataMember(Name = "AccountID", Order = 0)] public Guid _accountID; /// <summary> /// A read-only property; XML, JSON and DataContract serializers all seem /// to correctly recognize the public backing field when deserializing: /// </summary> [IgnoreDataMember] [XmlIgnore] public Guid AccountID { get { return this._accountID; } } [IgnoreDataMember] protected string _accountName; [DataMember(Name = "AccountName", Order = 1)] [XmlAttribute] public string AccountName { get { return this._accountName; } set { this._accountName = value; } } } XML, JSON and DataContract serializers all seem to serialize / deserialize matching object graphs here, so this attribute arrangement apparently causes those serializers to correctly assign to the public backing field when deserializing. I've tried protobuf-net with lists vs. single instances, different prefix styles, etc., but always either get the 'incorrect wire type ... Guid' exception, or the Guid property (field) not deserializing correctly. So the specific questions are, is there a quick workaround for this, and/or is there an explanation for both of outcomes 1 & 2 above, and/or can protobuf-net somehow be corralled into behaving like WCF in cases like this (i.e. follow the same DataMember/IgnoreDataMember semantics)? We hope not to have to create a protobuf dependency directly in the entity layer; if that's the case, we'll probably create proxy DTO entities with all public properties having protobuf attributes. (This is a subjective issue I have with all declarative serialization models; it's a ubiquitous pattern, but IMO, "normal" should be to have objects and serialization contracts decoupled.) Thanks!

  Read the article

• WPF TabItem Custom ContentTemplate

  - by lloydsparkes

  I have been strugging with this for a while, it would have been simple to do in WindowForms. I am making a IRC Client, there will be a number of Tabs one for each channel connect to. Each Tab needs to show a number of things, UserList, MessageHistory, Topic. In WindowForms i would just have inherited from TabItem, added some Custom Properties, and Controls, and done. In WPF i am having some slight issues with working out how to do it. I have tried many ways of doing it, and below is my current method, but i cannot get the TextBox to bind to the Topic Property. <Style TargetType="{x:Type t:IRCTabItem}" BasedOn="{StaticResource {x:Type TabItem}}" > <Setter Property="ContentTemplate"> <Setter.Value> <DataTemplate> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="540" /> <ColumnDefinition /> </Grid.ColumnDefinitions> <StackPanel Grid.Column="0"> <TextBox Text="{Binding Topic, RelativeSource={RelativeSource AncestorType={x:Type t:IRCTabItem}}}" /> </StackPanel> </Grid> </DataTemplate> </Setter.Value> </Setter> </Style> And the Codebehind public class IRCTabItem : TabItem { static IRCTabItem() { //This OverrideMetadata call tells the system that this element wants to provide a style that is different than its base class. //This style is defined in themes\generic.xaml //DefaultStyleKeyProperty.OverrideMetadata(typeof(IRCTabItem), // new FrameworkPropertyMetadata(typeof(IRCTabItem))); } public static readonly RoutedEvent CloseTabEvent = EventManager.RegisterRoutedEvent("CloseTab", RoutingStrategy.Bubble, typeof(RoutedEventHandler), typeof(IRCTabItem)); public event RoutedEventHandler CloseTab { add { AddHandler(CloseTabEvent, value); } remove { RemoveHandler(CloseTabEvent, value); } } public override void OnApplyTemplate() { base.OnApplyTemplate(); Button closeButton = base.GetTemplateChild("PART_Close") as Button; if (closeButton != null) closeButton.Click += new System.Windows.RoutedEventHandler(closeButton_Click); } void closeButton_Click(object sender, System.Windows.RoutedEventArgs e) { this.RaiseEvent(new RoutedEventArgs(CloseTabEvent, this)); } public bool Closeable { get; set; } public static readonly DependencyProperty CloseableProperty = DependencyProperty.Register("Closeable", typeof(bool), typeof(IRCTabItem), new FrameworkPropertyMetadata(true, FrameworkPropertyMetadataOptions.BindsTwoWayByDefault)); public List<String> UserList { get; set; } public static readonly DependencyProperty UserListProperty = DependencyProperty.Register("UserList", typeof(List<String>), typeof(IRCTabItem), new FrameworkPropertyMetadata(new List<String>(), FrameworkPropertyMetadataOptions.BindsTwoWayByDefault)); public String Topic { get; set; } public static readonly DependencyProperty TopicProperty = DependencyProperty.Register("Topic", typeof(String), typeof(IRCTabItem), new FrameworkPropertyMetadata("Not Connected", FrameworkPropertyMetadataOptions.BindsTwoWayByDefault)); public bool HasAlerts { get; set; } public static readonly DependencyProperty HasAlertsProperty = DependencyProperty.Register("HasAlerts", typeof(bool), typeof(IRCTabItem), new FrameworkPropertyMetadata(false, FrameworkPropertyMetadataOptions.BindsTwoWayByDefault)); } So my questions are: Am i doing it the right way (best practices)? If so how can i bind DataTemplate to Properties? If not so, what is the correct way of achieve what i am trying to achieve?

  Read the article

• Multi-level navigation controller on left-hand side of UISplitView with a small twist.

  - by user141146

  Hi. I'm trying make something similar to (but not exactly like) the email app found on the iPad. Specifically, I'd like to create a tab-based app, but each tab would present the user with a different UISplitView. Each UISplitView contains a Master and a Detail view (obviously). In each UISplitView I would like the Master to be a multi-level navigational controller where new UIViewControllers are pushed onto (or popped off of) the stack. This type of navigation within the UISplitView is where the application is similar to the native email app. To the best of my knowledge, the only place that has described a decent "splitviewcontroller inside of a uitabbarcontroller" is here: http://stackoverflow.com/questions/2475139/uisplitviewcontroller-in-a-tabbar-uitabbarcontroller and I've tried to follow the accepted answer. The accepted solution seems to work for me (i.e., I get a tab-bar controller that allows me to switch between different UISplitViews). The problem is that I don't know how to make the left-hand side of the UISplitView to be a multi-level navigation controller. Here is the code I used within my app delegate to create the initial "split view 'inside' of a tab bar controller" (it's pretty much as suggested in the aforementioned link). - (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { NSMutableArray *tabArray = [NSMutableArray array]; NSMutableArray *array = [NSMutableArray array]; UISplitViewController *splitViewController = [[UISplitViewController alloc] init]; MainViewController *viewCont = [[MainViewController alloc] initWithNibName:@"MainViewController" bundle:nil]; [array addObject:viewCont]; [viewCont release]; viewCont = [[DetailViewController alloc] initWithNibName:@"DetailViewController" bundle:nil]; [array addObject:viewCont]; [viewCont release]; [splitViewController setViewControllers:array]; [tabArray addObject:splitViewController]; [splitViewController release]; array = [NSMutableArray array]; splitViewController = [[UISplitViewController alloc] init]; viewCont = [[Master2 alloc] initWithNibName:@"Master2" bundle:nil]; [array addObject:viewCont]; [viewCont release]; viewCont = [[Slave2 alloc] initWithNibName:@"Slave2" bundle:nil]; [array addObject:viewCont]; [viewCont release]; [splitViewController setViewControllers:array]; [tabArray addObject:splitViewController]; [splitViewController release]; // Add the tab bar controller's current view as a subview of the window [tabBarController setViewControllers:tabArray]; [window addSubview:tabBarController.view]; [window makeKeyAndVisible]; return YES; } the class MainViewController is a UIViewController that contains the following method: - (IBAction)push_me:(id)sender { M2 *m2 = [[[M2 alloc] initWithNibName:@"M2" bundle:nil] autorelease]; [self.navigationController pushViewController:m2 animated:YES]; } this method is attached (via interface builder) to a UIButton found within MainViewController.xib Obviously, the method above (push_me) is supposed to create a second UIViewController (called m2) and push m2 into view on the left-side of the split-view when the UIButton is pressed. And yet it does nothing when the button is pressed (even though I can tell that the method is called). Thoughts on where I'm going wrong? TIA!

  Read the article

• C# WCF - Failed to invoke the service.

  - by Keith Barrows

  I am getting the following error when trying to use the WCF Test Client to hit my new web service. What is weird is every once in awhile it will execute once then start popping this error. Failed to invoke the service. Possible causes: The service is offline or inaccessible; the client-side configuration does not match the proxy; the existing proxy is invalid. Refer to the stack trace for more detail. You can try to recover by starting a new proxy, restoring to default configuration, or refreshing the service. My code (interface): [ServiceContract(Namespace = "http://rivworks.com/Services/2010/04/19")] public interface ISync { [OperationContract] bool Execute(long ClientID); } My code (class): public class Sync : ISync { #region ISync Members bool ISync.Execute(long ClientID) { return model.Product(ClientID); } #endregion } My config (EDIT - posted entire serviceModel section): <system.serviceModel> <diagnostics performanceCounters="Default"> <messageLogging logMalformedMessages="true" logMessagesAtServiceLevel="true" logMessagesAtTransportLevel="true" /> </diagnostics> <serviceHostingEnvironment aspNetCompatibilityEnabled="false" /> <behaviors> <endpointBehaviors> <behavior name="JsonpServiceBehavior"> <webHttp /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="SimpleServiceBehavior"> <serviceMetadata httpGetEnabled="True" policyVersion="Policy15"/> </behavior> <behavior name="RivWorks.Web.Service.ServiceBehavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="true"/> </behavior> </serviceBehaviors> </behaviors> <services> <service name="RivWorks.Web.Service.NegotiateService" behaviorConfiguration="SimpleServiceBehavior"> <endpoint address="" binding="customBinding" bindingConfiguration="jsonpBinding" behaviorConfiguration="JsonpServiceBehavior" contract="RivWorks.Web.Service.NegotiateService" /> <!--<host> <baseAddresses> <add baseAddress="http://kab.rivworks.com/services"/> </baseAddresses> </host> <endpoint address="" binding="wsHttpBinding" contract="RivWorks.Web.Service.NegotiateService" />--> <endpoint address="mex" binding="mexHttpBinding" contract="RivWorks.Web.Service.NegotiateService" /> </service> <service name="RivWorks.Web.Service.Sync" behaviorConfiguration="RivWorks.Web.Service.ServiceBehavior"> <endpoint address="" binding="wsHttpBinding" contract="RivWorks.Web.Service.ISync" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> <extensions> <bindingElementExtensions> <add name="jsonpMessageEncoding" type="RivWorks.Web.Service.JSONPBindingExtension, RivWorks.Web.Service, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" /> </bindingElementExtensions> </extensions> <bindings> <customBinding> <binding name="jsonpBinding" > <jsonpMessageEncoding /> <httpTransport manualAddressing="true"/> </binding> </customBinding> </bindings> </system.serviceModel> 2 questions: What am I missing that causes this error? How can I increase the time out for the service? TIA!

  Read the article

• protobuf-net: incorrect wire-type exception deserializing Guid properties

  - by Paul Smith

  I'm having issues deserializing certain Guid properties of ORM-generated entities using protobuf-net. Here's a simplified example of the code (reproduces most elements of the scenario, but doesn't reproduce the behavior; I can't expose our internal entities, so I'm looking for clues to account for the exception). Say I have a class, Account with an AccountID read-only guid, and an AccountName read-write string. I serialize & immediately deserialize a clone. Deserializing throws an Incorrect wire-type deserializing Guid exception while deserializing. Here's example usage... Account acct = new Account() { AccountName = "Bob's Checking" }; Debug.WriteLine(acct.AccountID.ToString()); using (MemoryStream ms = new MemoryStream()) { ProtoBuf.Serializer.Serialize<Account>(ms, acct); Debug.WriteLine(Encoding.UTF8.GetString(ms.GetBuffer())); ms.Position = 0; Account clone = ProtoBuf.Serializer.Deserialize<Account>(ms); Debug.WriteLine(clone.AccountID.ToString()); } And here's an example ORM'd class (simplified, but demonstrates the relevant semantics I can think of). Uses a shell game to deserialize read-only properties by exposing the backing field ("can't write" essentially becomes "shouldn't write," but we can scan code for instances of assigning to these fields, so the hack works for our purposes). Again, this does not reproduce the exception behavior; I'm looking for clues as to what could: [DataContract()] [Serializable()] public partial class Account { public Account() { _accountID = Guid.NewGuid(); } [XmlAttribute("AccountID")] [DataMember(Name = "AccountID", Order = 1)] public Guid _accountID; /// <summary> /// A read-only property; XML, JSON and DataContract serializers all seem /// to correctly recognize the public backing field when deserializing: /// </summary> [IgnoreDataMember] [XmlIgnore] public Guid AccountID { get { return this._accountID; } } [IgnoreDataMember] protected string _accountName; [DataMember(Name = "AccountName", Order = 2)] [XmlAttribute] public string AccountName { get { return this._accountName; } set { this._accountName = value; } } } XML, JSON and DataContract serializers all seem to serialize / deserialize these object graphs just fine, so the attribute arrangement basically works. I've tried protobuf-net with lists vs. single instances, different prefix styles, etc., but still always get the 'incorrect wire-type ... Guid' exception when deserializing. So the specific questions is, is there any known explanation / workaround for this? I'm at a loss trying to trace what circumstances (in the real code but not the example) could be causing it. We hope not to have to create a protobuf dependency directly in the entity layer; if that's the case, we'll probably create proxy DTO entities with all public properties having protobuf attributes. (This is a subjective issue I have with all declarative serialization models; it's a ubiquitous pattern & I understand why it arose, but IMO, if we can put a man on the moon, then "normal" should be to have objects and serialization contracts decoupled. ;-) ) Thanks!

  Read the article

< Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >