Search Results

Search found 414 results on 17 pages for 'chip'.

Page 7/17 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Connection manager detects network but won't connect

  - by Carson Chittom

  I've just installed 12.04 on my home desktop. Because of where it's located, in order not to have my children tripping over cat5 cable, I've got a cheap 802.11n USB device plugged in, which uses a Realtek 8192CU chip. The house wifi is protected with WPA2. Ubuntu's Network Manager detects the network, but connecting to it just times out and asks for the password again. I'm sure I'm using the correct password. No other computers on the house network are having any difficulty. This device previously worked correctly with both Windows 7 and OpenBSD in the same machine. The linux-firmware package is installed (from the disc) at version 1.79, and /lib/firmware/rtlwifi/rtl8192cufw.bin is present. dmesg|grep rtl only shows the "loading firmware" message. I've tried Google, but I apparently can't find the right set of words to plug in, because I haven't found anything related (lots of "doesn't work at all," but nothing matching my circumstances). Any help would be greatly appreciated.

  Read the article

• Ubuntu 12.04 LTS x86_64 sound artifacts when scrolling with firefox

  - by Nh3xus

  I've been using Ubuntu since the 10.04 LTS version and i have a sound problem that still remain in my fresh install of the 12.04 LTS AMD64 version. This install has been performed by formatting the / partition and my documents were kept safe in the separated /home partition. The problem : When i listen to a audio or video source while browsing the web with Firefox, I have some sound artifacts when i'm scrolling and stops when i'm not doing it. This happens when i'm doing X11 related actions too, such as switching between virtuals desktops. Computer configuration of my laptop : - Ubuntu 12.04 LTS AMD64 - Plantronic USB Headphones - Intel HDA Audio sound card (laptop) with SigmaTel STAC9200 chip - AlsaMixer v 1.0.25 - Nvidia GeForce 7950 GTX with Nvidia 295.40 driver Any advices are welcome here :) Note : This is my first post on AskUbuntu.

  Read the article

• Headset undetected when plugged in

  - by tough

  I have recently installed Ubuntu 12.04 in my machine which was running windows 7. I have been trying to configure the audio to work exactly as it used to work in Windows but never been able to do so. I have followed this link exactly. I am still not getting the required configuration. aslamixer command shows me with 5 adjustable controls as shown below Master "adjustable" Speaker "adjustable" PCM "adjustable" Front "adjustable" AND Beep "adjustable" Mic Jack Mic In or Lin In S/PDIF OO "in a box" S/PDIF D OO "in a box" S/PDIF P DIGITAL or Analog M It does not detect the headset jack when plugged in. I here mean to say that the sound form the speakers does not go off when I plug in my headset jack. How can I make this working. Some other googling also did not help. I am on Hp Pavilion DV7 machine. The chip is IDT 92HD75B3X5 and the card is HDA ATI SB.

  Read the article

• Analog and digital audio output at the same time

  - by wim

  My speakers use a digital input, but my headphones use an analog input. I have them both plugged in, and when I want to use the headphones I just turn off the speakers and switch on the headphones. I know that simultaneous output on digital and analog is supported by the hardware, because it worked fine in Windows XP. But on Ubuntu, I seem to only get one at a time, depending on which setting is selected in the combo box located at System -> Preferences -> Sound -> Hardware. How can I get simultaneous analog and digital output without having to switch the profile every time? I'm on Ubuntu 11.04 and it's an HDA Intel chip.

  Read the article

• Wubi downloaded and installed 64bit 12.10 on my 32bit netbook

  - by Troy

  I downloaded the Wubi installer on my atom N450 netbook. When I started up Ubuntu I got an error that read failed to change the mode of /ect/passwd- to 0600. Then while it booted it froze and several strange characters filled the screen. Finally it loaded it ran pretty slow, and I could connect to my router, but not to the internet. Ping 8.8.8.8 showed no server found. So I checked the about computer and it said I was running the 64 bit installation. Now I know that my computer has a low power 32 bit chip and even the Ubuntu iso download suggested a 32 bit installation. So I went to double check and see if I just missed the option for a 32 bit Wubi install and I did not. There was no option. Is there any way to download a 32 bit version of 12.10 through the Wubi?

  Read the article

• Turning off the backlight on the console

  - by Albertas Agejevas

  I'm using an IBM Thinkpad X21 as a 3G router. It's running a server install of lucid. The laptop has the lid up most of the time. There is no X, just a plain console. The colsole blanks itself, but the LCD backlight is always on. The graphics chip is ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64). The following modules related to the framebuffer are now loaded: $ lsmod | grep fb fbcon 35102 71 tileblit 2031 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon vga16fb 11385 1 vgastate 8961 1 vga16fb Can I make the LCD backlight turn off when the colsole is unused and have it turn on automatically when needed?

  Read the article

• Ubuntu and Surface Pro, wifi issues not fixed?

  - by Confused or too stupid

  Just a quick question, from the numerous other threads I found, is the wifi still a no go straight out of installing Ubuntu? I tried this Dual boot Surface Pro with Ubuntu? with 13.04, the wifi is sporadic in working. From that and other threads I gathered that 13.10 would include the fix, so I tossed that onto the Surface as well, with the same results. Is there anything I am missing? Is there any other distro that has better luck with the Marvell chip?

  Read the article

• What is the state-of-the-art for using Broadcom Crystal hardware?

  - by echo-flow

  I just bought a Dell Mini 1012, which comes with a Broadcom Crystal media accelerator chip. I'd like to know what is the current state-of-the-art with regard to using this hardware on Ubuntu? What I mean by this is, what is the best way to install drivers to make use of this hardware, and what media players currently support it? I've read that XBMC currently does, but what about gstreamer? Ideally, I'd like to find a solution so that I can accelerate Flash videos using the device. It seems like one strategy may be to download Flash videos to the hard drive and play them with an external, Crystal-enabled media player, and so that seems like one option, but I'm wondering if any of the free flash alternatives (Gnash and Lightspark) support hardware acceleration of flash video using the Crystal API? It seems like there is a lot of information about all of this on the web, but it's not consolidated, and seems like a rapidly moving target, so any insight anyone may have into this would be appreciated.

  Read the article

• Wake up from sleep with GPIO (I2C)

  - by spambas

  My situation: Ubuntu 10.10 running on an atom driven main board the main board has a GPIO chip integrated (F75111 by Fintek). They communicate through I2C(SMBus). We have a driver running that works, we can send outputs and read inputs. Great! We would like to use the I/O interface to suspend (sleep) and wake up again. Sleep is no problem. On an incoming input: run s2both. Ubuntu goes to sleep and prepares a hibernate state, so when the power-cord is unplugged by accident, it will wake from hibernate. But the big question: how to wake on an input if the OS is already sleeping! You can wake from a lot of devices (lan, usb, ring, etc) but I can't find out how to wake from a I2C card. PLEASE HELP!

  Read the article

• how can i change display resolution? (GMA 900)

  - by Paulo.woo

  how can i change display resolution with GMA 900 and ubuntu 11.10? i wonder how can i set up graphic driver on ubuntu system. just installed ubuntu 11.10 on my desktop (hewlet packard dc7100 usdt) i checked system configuration it seems ubuntu doesn't recognize my graphic chip set. i can change resolution only 800x600 and 1024x768. i want to change it 1280X800. is there anyone can help me! please!!! :) thanks for your help!!

  Read the article

• Simpler Times

  - by Simon Moon

  Does anyone else out there long for the simpler days where you needed to move a jumper in the jumper block to set your modem card to use IRQ7 so it would not conflict with the interrupts used by other boards in your PC and your modem card came with a 78 page manual telling you everything you would need to know to write your own driver for the board including a full schematic along with the board layout showing every chip, capacitor, and resistor?  Ahhhhh, the simplicity!I am wrestling with UserPnp issues for a USB software licensing dongle that is needed by some third party software in one of our production applications. Of course, every machine in production is virtual, so it could be anything in the chain of the software application library to the device driver running on the VM to the configuration of the simulated USB port to the implementation of the USB connection and transport in the virtual host to the physical electrical connections in the USB port on the hypervisor.If only there were the virtual analog to a set of needle-nose pliers to move a virtual jumper.Come to think of it, I always used to drop those damn things such that they would land in an irretrievable position under the motherboard anyway.

  Read the article

• How to suppress "Card not present / present" spam in syslog?

  - by vava

  I'm getting a lot of Dec 27 08:35:49 htpc kernel: [ 1552.153797] pciehp 0000:00:1c.5:pcie04: Card not present on Slot(0-2) Dec 27 08:35:49 htpc kernel: [ 1552.157744] pciehp 0000:00:1c.5:pcie04: Card present on Slot(0-2) messages in my syslog, about 10 every second. That just makes syslog unusable, can I somehow get rid of them? I don't know and don't really care about the reason of those messages being there, partly because my motherboard doesn't have pcie slots on it and partly because everything I care about works perfectly. That might be a WiFi chip I disabled in bios but hey, I don't want wifi to be powered on, I'm not using it. So can I just suppress those messages?

  Read the article

• can not get Toshiba tv to full resolution

  - by Tloc2077

  I have a 23inch Toshiba model#23L1350U that I am using as a computer monitor via VGA plug; it is a full 1080P resolution TV but in Ubuntu it shows up as a Toshiba 72inch Television and wont go past the resolution 1366 by 1768. Has anyone came up with a solution to this problem..I used to get full 1080 resolution with my Insignia 32 inch TV so I know my hardware can push the signal, I am running a Radeon x1550 graphics cars 3200+ processor on a 756 chip set 64bit version of Ubuntu 13.04 your help is greatly appreciated and you may or may not be compensated for your time

  Read the article

• How many CISC instructions do compilers use?

  - by Euphoric

  CISC processors have sometimes huge instruction sets. This makes assembly programming somehow easier. But it reduces overall effectivness of the whole chip. But how many of those instructions are used by modern compilers? I'm especialy interested in relation of CISC vs. RISC where in CISC, compiler can use specialised instructions, that might increase effectivness. But do compilers use those instructions? If yes, then how many of them are used?

  Read the article

• How to reduce noise in Skype?

  - by tkc

  According to Alsamixer I do have a HDA Intel soundcard with Nvidia MCP77/78 HDMI chip (Realtek sound card on MSI notebook). When I use Skype under Ubuntu 12.04 for video calls, the other side hears background noise such as in Windows when you have your microphone boosted. In fact they can hear everything, even the fans turning on. There is nothing tweaked on Ubuntu's fresh installation. Also tried this site: https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages , but there are no *.deb files that I can test if any fix the problem. The question is if there is a way to add/tweak something to enable on software level the noise cancellation like the Windows sound drivers have that option. I use my build in mic.

  Read the article

• Resources for creating a turn-by-turn navigation system

  - by benwad

  I'm trying to create a kind of turn-by-turn satellite navigation system using the iOS SDK. I get the directions from the server and draw them on the map, then I keep getting location updates from the iPhone's GPS chip. Currently I start by finding the nearest turning point then, each time the user comes within a certain distance of the next turning point, a verbal cue is given and the turning point index is incremented. This is a delicate system and I'd like to make it more robust so I can tell when the user is going the wrong direction etc. Basically I'm looking for some literature about turn-by-turn navigation, in terms of tracking the user's progress and whether they're going the right direction. I'd have thought there's a lot of research out there but I can't seem to find anything apart from simple tutorials on how to use a given SDK or directions API. Can anyone direct me to a good run-through of the various techniques used in software such as TomTom or Google Maps Navigation?

  Read the article

• Is there a way to suppress one specific message from syslog?

  - by vava

  I'm getting a lot of Dec 27 08:35:49 htpc kernel: [ 1552.153797] pciehp 0000:00:1c.5:pcie04: Card not present on Slot(0-2) Dec 27 08:35:49 htpc kernel: [ 1552.157744] pciehp 0000:00:1c.5:pcie04: Card present on Slot(0-2) messages in my syslog, about 10 every second. That just makes syslog unusable, can I somehow get rid of them? I don't know and don't really care about the reason of those messages being there, partly because my motherboard doesn't have pcie slots on it and partly because everything I care about works perfectly. That might be a WiFi chip I disabled in bios but hey, I don't want wifi to be powered on, I'm not using it. So can I just suppress those messages?

  Read the article

• How to get the Dash and HUD to appear. (and stop Unity spewing error messages.)

  - by Ubuntiac

  I just installed Ubuntu 12.04 on my wifes Dell Inspiron 1501, which uses an R300 ATI graphics chip. Neither the Dash or HUD appear when pushing the appropriate key. When I try unity --reset & in the terminal, I see that over and over it's spitting out: r300: CS space validation failed. (not enough memory?) Skipping rendering. This is just after starting Ubuntu with no apps open, so I find it hard to believe that just rendering the Dash / HUD is completely blowing out the VRAM. Any suggestions on getting this working? /usr/lib/nux/unity_support_test -p shows OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RS480 OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes All sections say "YES"

  Read the article

• No sound on laptop speakers on an Acer Aspire 6920

  - by snewix

  Computer: Acer Aspire 6920 Card: HDA Intel Chip: Realtek ALC889 My problem is that the laptop build-in speakers don't play any sound. When i plug in my headphones the sound works normally, the same goes with external speakers. Those work normally like the headphones. The profile in the Sound settings is Analog two-way Stereo. I am using Ubuntu 12.04. Might trere be any problem with my sound drivers or something similar? Any form of help appreciated.

  Read the article

• Asus A8N-SLI soundcard/headphone not recognized/working

  - by Remon

  I have an Asus A8N-SLI with built-in sound-card which in the front has headset connection. Alsamixer V1.0.25 says Card: HD-Audio Generic Chip:ATI R6xx HDMI. Only option it gives is S/PDIF nothing else. I can only select the Generic sound-card others are not available. It seems it is not being recognized by Ubuntu. My technical skills are limited and I have searched for similar problems but could not find a solution. Any help in how to proceed forward is therefore greatly appreciated. I also have a windows focus problem with Gnome3 and Unity for which I will make a new question. Between those two problems it works like a charm as always. Though I'm only going to upgrade the laptop to 12.04 if I have the desktop running smoothly.

  Read the article

• how to install drivers for intel corporation mobile gm965 gl960 integrated graphics controller?

  - by SanraS

  I have a "inspiron 1525"and am running 11.10 version of Ubuntu, I noticed that when scrolling I can see a lag and also when playing back HD content it will freeze the video for a few seconds and then resume, none of those happened on winVista when I had it installed, now I do prefer Ubuntu and would like to fix this rather than go back to windows. the chip is an "intel corporation mobile gm965 gl960 integrated graphics controller" as stated by "lspci" I don't know much about dealing with installing drivers that's why I'm asking for help and would like to be commands that I can put on terminal, rather than go here and then there and then look for this or that. I think I'll get lost in the middle but terminal I can follow. thanks for your help.

  Read the article

• How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

  - by rewbs

  Hi all, I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

  Read the article

• Log in sound is playing, but no sound during gnome desktop session.What's the problem?

  - by user14376

  When i installed ubuntu, everything was great. But one day, i heard the login sound but no sound on the desktop session. This happens every time. I have reinstalled sound drivers several times, checked speakers are not mute, checked alsamixer, saw all the troubleshooting tips on the net, checked user privileges too but of no help. anyone knows the answer? Please help!!!!! I have ubuntu 10.4LTS and alc662 sound chip. My computer is detecting the sound card and no problems with my speakers.This maybe a bug but i cannot report as i don't know if this will repeat(I atleast have to solve the problem first).

  Read the article

• which flavor of Ubuntu works on ASUS P4GE MX mobo with P4 and 1gb ram

  - by user209546

  I have Ubuntu 13.10 installed on ASUS P4GE MX Mother board with Intel 845 Chip set and Pentium 4 processor with 1GB ram. Unity and Dash are not loaded, hence not able to close any page opened by right clicking on blank desktop and entering into 'change desktop background'. Live wall papers are working but the setting page is not closing as no buttons are available on the panel. I removed Ubuntu 13.10 and tried with 13.04 / 12.10 / 12.04 / 11.10 and 11.04. Ubuntu 11.04 is working but the problem is that it out of date and upgrades available. Please provide a way / solution

  Read the article

• Ubuntu 12.04 x64 - Very slow response and sluggishness

  - by Murphy1138

  Recently updated to 12.04 x64 on my AMD HEX core 4GB system, over the last few days I feel that the overall system is sluggish/laggy , for instance hitting the dash button, the dash opens but the recent activity of files/videos etc is incredibly slow to populate, like wise in Nautilus and browsing my media, the file names are showing up but it takes an age to populate the "thumb" of the video, If I go into Gnome-shell the shell response is a little faster but again clicking on applications there is still a noticeable pause. I have the latest Nvidia Drivers loaded and I have very fast SATA drives, if I reboot into windows 7 the system is so much quicker in its response, I only use windows for games and Ubuntu is my main OS. 10.04/10.10/11.04 was Super quick and this was when the system still had a Duel Core Chip and a worse Nvidia card, 11.10 was pretty snappy, but 12.04 just feels bloated on each system I have installed it on. My hardware is more than up to the task so has anyone got any commands i can run to help diagnose the issue? Anyone else got the same problems? Thanks Murph

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >