Search Results

Search found 13860 results on 555 pages for 'core graphics'.

Page 7/555 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• How to enable desktop effects on Ubuntu 10.04 after upgrade from Ubuntu 8.04?

  - by Manohar Bhattarai

  I upgraded my Ubuntu 8.04 to Ubuntu 10.04. When I try to enable desktop effects it says "Desktop effects could not be enabled". The output of "lspci | grep VGA" is : 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) Hardware drivers says there is no propriority hardware driver. I installed nVidia driver but I think my is an Intel graphics device. Please help.

  Read the article

• Does upgrading RAM causes increase in Graphic card's share?

  - by A.S.

  I have asked this question on Ask Ubuntu, and I was suggested to Upgrade RAM from most voted answers. But I got a point about my graphics card. Since, I can upgrade RAM and not graphics card, Does upgrading RAM also cause graphics memory to increase. To clear the point: My specs are given below: Laptop : Lenovo 3000 Y410. (bought in 2008 October) RAM: 1 GB (DDR2) External Graphics (Dedicated): N/A Internal Graphics (Shared): 256 MB Graphics Chipset: Intel GMA X3100 My Question is: If I increase my RAM to 3 GB, will it increase graphics cards share of the Memory. In other word, If graphics card shares 256 MB in 1GB RAM, will it share more, when I upgrade the RAM into 2GB or more ? Authentic resource link will be much appreciated I have recently known that, My chipset GMA X3100 can address 384 MB of RAM. So the question.

  Read the article

• C or assembly code to find current cpu core speed

  - by honestann

  How can my application efficiently determine the following information peroidically while it executes: 1: current speed of each of the 8 CPU cores. 2: which core the code is currently executing on. My application is C and assembly-language, so any solution in either C or assembly-language is fine. This code needs to execute quickly, so creating, reading and processing a file generated by "cat /proc/cpuinfo" is much too slow. The cores slow-down and speed-up automatically, probably to keep CPU temperature under control. Therefore, a one-time measure is not sufficient for my purposes. My application already reads and subtracts the cpu cycle counter in assembly language to determine number of clock cycles, but my program cannot compute elapsed time in nanoseconds unless it knows the current clock frequency of the cpu cores (and which core the code is executing on). Thanks!

  Read the article

• Graphics card initialisation problems when booting - requires a "double" boot

  - by DMA57361

  Problem Outline When booting from cold (and my machine is disconnected from main power when off, but leaving it connected doesn't help) the graphics card (single PCI-e card GeForce 460) will not initialise on the first boot, leaving me with the motherboards on-board graphics (which kick in automatically if no PCI-e card is found). However, if I restart the computer - normally I do this by powering it off just after the numlock lights up on the keyboard (ie, just after POST/BIOS and before Windows takes over), wait for the system to whirr down, and power up again - the graphics card will work correctly. Once double-booted in this matter the system seems to work correctly - with no noticeable problems. This is reproducible every time I try to boot - it has been working like this for about a month now. Background Information Sept 2010 - I suffered a hardware malfunction (crashes in Windows and graphics corruption on BIOS screens). By way of spare hardware I determined that replacing the PSU removed the issue, so I replaced the PSU with a brand new one of slightly higher power (460W replaced with 500W). Oct 2010 - The problem resurfaced. I purchased a new graphics card (GeForce 460), which removed the problem. The new graphics card immediately started having the boot initialisation problems mentioned. I presumed there was a motherboard fault all along, but because the system worked once booted, and I was temporarily out of spare money, I left the system alone and continued to use it. Early/Mid Dec 2010 - In the space of 5 days I recieved 3 instances of hard drive corruption (seemlingly fixed by chkdsk and sfc in each case...). Since I was already under the impression the motherboard was faulty, I purchased a new one ASAP, this also required new RAM (as I dropped from 4 slots to 2 and didn't want to drop mem quantity). Past 3-4 weeks - With a brand new PSU, Graphics Card, Motherboard and RAM I'm suffering the problem outlined above. So, what could be causing this and how do I can resolve it? Additional Notes Once double-booted the system seems to work entirely correctly. The graphics card problem has occured on two entirely different motherboards. I do not have the opportunity to test the graphics card in a different computer (I've only the old motherboard, which is dubious, or a really old desktop that still has an AGP port). Under load (ie, modern games for long enough for temperatures to plateau) the system remains stable and performs as expected. The software that came with the new motherboard and SpeenFan both report all voltages and temperatures are within nominal bounds, when idle and when under load. I've looking over the BIOS settings for my motherboard multiple times and can find nothing that helps. This system is configured to run with everything at standard levels - no overclocking. I've tried booting the system with only the mobo and graphics card connected (thinking maybe my new PSU was too weak for the new gfx card, even though it meets the quoted PSU requirements for the card) but the same problem persists (and really if the PSU was weak I'd have problems with the system under load). When the gfx card does not initialise the fan on its cooling unit is running, possibly slower than otherwise - but this measurement is by eye and so unreliable.

  Read the article

• How to compare speed of graphics cards in Windows desktop environment?

  - by Al Kepp

  I use Windows 7 and Intel Core i3 CPU with integrated graphics. My problem is that it eats valuable system RAM for display. I can replace it with an old PCIe Radeon X700, so all system RAM will be usable for applications. The question is if an old Radeon X700 is comparable in W7 desktop speed to a new integrated i3 graphics. Are there any test programs which compare the speed of graphic cards in Windows 7 desktop environment (i.e. no Direct3D games, just Windows desktop)? (According to Tomshardware, Radeon X700 is probably even faster than Core i3 in 3D. But there are no native WDDM 1.1 W7 drivers for X700, only WDDM 1.0 Vista drivers are available.)

  Read the article

• SQL SERVER – The Difference between Dual Core vs. Core 2 Duo

  - by pinaldave

  I have decided that I would not write on this subject until I have received a total of 25 questions on this subject. Here are a few questions from the list: Questions: What is the difference between Dual Core and Core 2 Duo? Which one is recommended for SQL Server: Core 2 Duo or Dual Core? Can I upgrade my Dual Core to Core 2 Duo? If Dual Core has 2 CPUs, how many CPUs does Core 2 Duo have? Is it true that Core 2 Duo and Dual Core meant the same thing? Well, let us see the answer. Optimistically, I would be directing everybody to this blog post if I receive a question of the same kind sometime in the future. To verify the information that I provide, visit Intel’s site. For additional information regarding the subject, visit Wikipedia. My Answer: Any computer that has two CPUs or two “cores“ is known as Dual Core. Core Duo is a brand name of Intel for Dual Core. Core 2 Duo is simply a higher version of Core Duo. (e.g. for Pentium brand, it`s like Pentium I, Pentium II, etc.) The computer I am using now has Core 2 Duo. Intel has launched a new brand, which they call i3, i5, and i7.  Here, the numbers are not related to the number of cores; rather, they show the range of the CPU. I3 is of low range and i7 is of high range. Feel free to add more details by adding valuable comments here. And if you still want to ask why I created this blog post, well, I mentioned that I was waiting for 25 questions threshold to hit, before I write about this subject which I didn`t really plan to write about. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• Math for core animation?

  - by jasonbogd

  What is a good level of math required for, like, advanced core animation? Take this for example: http://cocoadex.com/2008/01/lemur-math.html And what's a good book/resource to learn it? -Jason

  Read the article

• Apple Core Foundation license

  - by Shane

  Hi all, A short but sweet question: Can I use Apple's open source Core Foundation (CF classes) in a commercial product for free? That is, can I compile and link against the libraries without open sourcing my own applications's code? Obviously if I alter the original CF code, I would submit the changes. It's a very well constructed API and I'd hate to have to reinvent the wheel. Cheers, Shane

  Read the article

• Core Data passing context between methods on secondary threads

  - by JK

  My app spawns a secondary thread for some core data store maintenance. In the secondary thread, I set up a context which I then pass to other methods e.g. [self editEntriesInContext:context]. However, this causes objects fetched from the context to become invalidated in editEntries... Why does this occur? I thought the only requirements were for the secondary thread to have its own context and managed objects, which I adhere to. (Note: The context is properly retained)

  Read the article

• Blending Three Images into Graphics Context Using Alpha Blend Mode kBlendModeOverlay

  - by steganous

  Does kCGBlendModeOverlay not work exactly like Photoshop's Overlay blending mode? I'm trying to overlay three images into a graphic context via: [uiimageGreen drawAtPoint:CGPointMake(x, y) blendMode:kCGBlendModeOverlay alpha:1.0]; [uiimageRed drawAtPoint:CGPointMake(x, y) blendMode:kCGBlendModeOverlay alpha:1.0]; [uiimageBlue drawAtPoint:CGPointMake(x, y) blendMode:kCGBlendModeOverlay alpha:1.0]; In the end, if I overlay just two of the three, the result is much closer to my desired output color in places where both images intersect. Adding the third image, however, causes the first-drawn image's color to be dominant in the resulting mix of colors. (e.g. in the above code, green comes out dominant, when the result should actually be white) Do you get the same result if you try?

  Read the article

• Touch draw in Quatz 2D/Core Graphics

  - by OgreSwamp

  Hello, I'm trying to implement "hand draw tool". At the moment algorythm looks like that (I don't insert any code because methods are quite big, will try to explain an idea): Drawing In touchesStarted: method I create NSMutableArray *pointsArray and add point into it. Call setNeedsDisplay: method. In touchesMoved: method I calculate points between last added point from the pointsArray and current point. Add all points to the pointsArray. Call setNeedsDisplay: method. In touchesFinished: event I calculate points between last added point from the array and current point. Set flag touchesWereFinished. Call setNeedsDisplay:. Render: drawRect: method checks is pointsArray != nil and is there any data in it. If there is - it starts to traw circles in each point of this array. If flag touchesWereFinished is set - save current context to the UIImage, release pointsArray, set it to nil and reset the flag. There are a lot disadvantages of this method: It is slow It becomes extremely slow when user touches and move finger for long time. Array becomes enormous "Lines" composed by circles are ugly I would like to change my algorithm to make it bit faster and line smoother. In result I would like to have lines like on the picture at following URL (sorry, not enough reputation to insert an image): http://2.bp.blogspot.com/_r5VzEAUYXJ4/SrOYp8tJCPI/AAAAAAAAAMw/ZwDKXiHlhV0/s320/SketchBook+Mobile(4).png Can you advice me, ho I can draw lines this way (smooth and slim on the edges)? I thought to draw circles with alpha gradient on the edges (to make lines smoother), but it will be extremely slowly IMHO. Thanks for help

  Read the article

• Display with intel integrated graphics, bitcoin mine with Radeon 6950

  - by karategeek6

  I'm on Ubuntu Linux 11.04 64 bit. I have an intel i5 with integrated graphics and a Radeon 6950, with one monitor. I would like to run my graphics on the integrated card, and run bitcoin mining on the 6950. I have bitcoin mining working when I use the 6950 for both display and mining. Every time I try and and use the integrated graphics instead, OpenCL doesn't recognize my 6950. Using aticonfig --initial when using the integrated graphics for display breaks things. So I used the xorg.conf it created as a basis and tried to manually edit it. I really don't know what I'm doing, though. My last attempt is given below. The graphics ran off the integrated card, but the 6950 wasn't recognized. Any help would be greatly appreciated! xorg.conf: #Section "ServerLayout" # Identifier "Intel Layout" # Screen "Default Screen" # Identifier "aticonfig Layout" # Screen "aticonfig-Screen[0]-0" # Screen 0 "aticonfig-Screen[0]-0" 0 0 #EndSection Section "Module" Load "glx" EndSection # Intel Section "Device" Identifier "Intel Integrated Graphics" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Default Monitor" Option "VendorName" "Monitor Vendor" Option "ModelName" "Monitor Name" Option "DPMS" "true" EndSection Section "Screen" Identifier "Default Screen" Device "Intel Integrated Graphics" Monitor "Default Monitor" DefaultDepth 24 EndSection # ATI Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Disappeared graphics card

  - by lenovo user

  I have a Lenovo T520 with two graphics cards, an nVidia quadro and an intel graphics card. I'm running a Ubuntu and Windows 7 dual boot. I can no longer find any trace of my intel graphics card. In my linux boot: > lspci | grep VGA > 01:00.0 VGA compatible controller: nVidia Corporation GF106 [Quadro 2000M] (rev a1) In Windows in control panel display- advanced settings, I only see the NVIDIA Quadro 2000M. In the BIOS there is no mention of the intel graphics card, no where I can find to try and turn it on or off. I thought I was going crazy, but then I found a post I made on ask ubuntu I made 3 months ago where I listed the output of lspci on this same machine: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [Quadro 2000M] (rev a1) What is going on? How could my intel graphics card have been disabled or turned off somehow without my knowledge? I've been in the BIOS 3 times now, each time convinced the last time I must have missed something, but I always find nothing. Am I missing something there? Could a thief have opened my computer and stolen my graphics card?

  Read the article

• Core Data multi-threading

  - by JK

  My app starts by presenting a tableview whose datasource is a Core Data SQLite store. When the app starts, a secondary thread with its own store controller and context is created to obtain updates from the web for data in the store. However, any resulting changes to the store are not notified to the fetchedresults controller (I presume because it has its own coordinator) and consequently the table is not updated with store changes. What would be the most efficient way to refresh the context on the main thread? I am considering tracking the objectIDs of any objects changed on the secondary thread, sending those to the main thread when the secondary thread completes and invoking "[context refreshObject:....] Any help would be greatly appreciated.

  Read the article

• Out-Of-Memory while doing Core Data migration

  - by Kamchatka

  Hello, I'm migrating a CoreData model between two versions of an application. I was storing binary data as blobs in the previous version and I want to take them out of the blobs for performance. My issue is that during the migration it seems that Core Data loads everything into memory which leads to Low Memory Warnings and then to my app being killed. Apple documentation suggests the following : http://developer.apple.com/library/mac/documentation/Cocoa/Conceptual/CoreDataVersioning/Articles/vmCustomizingTheProcess.html#//apple_ref/doc/uid/TP40005510-SW9 However, it seems to rely on the fact that the large objects are applied different mapping. In my case, all the objects are basically the same and the same mapping has to be applied to each of them. I don't see in this case how I could apply their technique. How should I handle a migration with very large objects ?

  Read the article

• Installing drivers for switchable graphics

  - by Anonymous

  I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

  Read the article

• Is a text file with names/pixel locations something a graphic artist can/should produce? [on hold]

  - by edA-qa mort-ora-y

  I have an artist working on 2D graphics for a game UI. He has no problem producing a screenshot showing all the bits, but we're having some trouble exporting this all into an easy-to-use format. For example, take the game HUD, which is a bunch of elements laid out around the screen. He exports the individual graphics for each one, but how should he communicate the positioning of each of them? My desire is to have a yaml file (or some other simple markup file) that contains the name of each asset and pixel position of that element. For example: fire_icon: pos: 20, 30 fire_bar: pos: 30, 80 Is producing such files a common task of a graphic artist? Is is reasonable to request them to produce such files as part of their graphic work?

  Read the article

• Swichable Graphics

  - by user67291

  Im having a bit of a problem with my 2 graphic card in my laptop. laptop: Acer Aspire 5553g Graphic Cards: Performance: ATI Mobility Radeon HD 5650 Power saving: ATI Radeon HD 4200. On this laptop i have used ubuntu 11.04, then upgraded to 11.11, and now upgraded to 12.04 the other day. The problem is that sins i upgraded to 12.04 im unable to switch to my performance graphic card using the Catalyst Control Center. Under 11.04 and 11.11 it was no problem. I open the Catalyst Control Center and select the performance option then apply, it tels me that it will be applied after reboot, I reboot and nothing has changed. Im able to "force" it by changing in BIOS, so i know there is nothing wrong with the card. Thanks /Daan

  Read the article

• Can't install ATI proprietary drivers in 12.10. Unity is Missing

  - by EApubs

  I have a laptop with ATI Radeon 6770M HD Hybrid graphics card. In Ubuntu 12.04, I installed the fglrx driver through "additional drivers" and it worked. (I can even switch GPUs). But in the new Ubuntu 12.10, after installing, Unity won't load. Only the mouse and the wallpaper. If I initialize the settings sudo aticonfig --initial then after rebooting it gives a warning saying I'm in low graphics mode! How to fix this? PS : Earlier i used software source to install the drivers. But when using the terminal, I got this warning : update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken Update : Filed a bug report in launchpad : https://bugs.launchpad.net/fglrx/+bug/1068661

  Read the article

• Can't install ATI proprietary drivers in 12.10

  - by EApubs

  I have a laptop with ATI Radeon 6770M HD Hybrid graphics card. In Ubuntu 12.04, I installed the fglrx driver through "additional drivers" and it worked. (I can even switch GPUs). But in the new Ubuntu 12.10, after installing, Unity won't load. Only the mouse and the wallpaper. If I initialize the settings sudo aticonfig --initial then after rebooting it gives a warning saying I'm in low graphics mode! How to fix this? PS : Earlier i used software source to install the drivers. But when using the terminal, I got this warning : update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken Update : Filed a bug report in launchpad : https://bugs.launchpad.net/fglrx/+bug/1068661

  Read the article

• Sempron 145 core unlocking

  - by Grant

  Call me a cheapskate looking for performance, but I have a Sempron 145 processor that has been unlocked to an Athlon II X2 4450e with a GIGABYTE GA-990FXA-UD3 motherboard, but only one of the two processor cores can be used at a time. If both of the cores are enabled in the BIOS the kernel will hang during boot, If I reboot the system and disable the second core (but not re-lock the processor), it will take me to the grub and then start normally. Is there a way to enable both cores and boot without kernel hangs?

  Read the article

• Problems with Intel graphics and external display

  - by dpcat237

  I have Asus Zenbook ux31 with Intel HD 3000 GPU and Ubuntu 12.10 64 bits. I usually use external monitor and when update GPU controller it removes previous configuration. So after updates Ubuntu only detect external monitor and when I enter to Ubuntu with laptop's monitor Unity doesn't start and I only see black screen. If I re-install Ubuntu all works fine until next GPU update :(( Another think that after some GPU update Ubuntu doesn't detect fine monitor and I have to restart 1-2 times Ubuntu to Unity starts fine ¬¬ Someone have some problem and know some solution? I hope some day Intel GPU will work fine with Ubuntu!

  Read the article

• Laptop, unable to install discrete graphics card GTX 880M

  - by FoxyShadoww

  So I've bought the GT70 2PE Dominator Pro a few weeks ago and I installed Zorin OS 9 Ultimate on it. Today I tried to install the Nvidia drivers on my laptop since it has the GTX 880M, but my system became unbootable. Can anyone help me with this issue? I will write down what I've tried so far. This is what I've tried so far: Downloaded the newest Nvidia drivers from their website. Pressed CTRL+ALT+F2 to open the terminal page thingy. Logged in and got root access. Stopped the lightdm service. Ran the NVIDIA-Linux-x86_64-340.32.run installer. Pressed the accept button and right after that it told me the following message: The distribution-provided pre-install script failed! Continue installation anyway?. When I install anyway, it will crash my system and makes it unbootable, Does anyone know how to use my GTX 880M? Do I need to enable it on boot time somehow? Thanks for the support, Sapphire ~

  Read the article

• Distorted graphics, problems with starting up

  - by GreenEggsAndHam64

  Using the newest version of Ubuntu, freshly installed. NVIDIA GeForce GTX 560 Ti. It's mostly the font that doesn't render well, I think. Small logos do it too, sometimes. Screenshot to clarify (see bookmarks, search bar, etc.). EDIT: Another screenshot. And, sometimes when I start up, I get only a black screen saying [OK]. I can move my mouse around, but nothing helps, except for restarting. Also, my desktop picture doesn't stay the same. Every time I start up Ubuntu it goes back to the standard purple background. They're not very serious problems, but it's all a little annoying. Thanks in advance for your help.

  Read the article

• game is playing but broken graphics

  - by mewanttux

  I installed Steam on Lubuntu and wanted to play dota2 (it has source engine) and it sayed i need a 3dts driver or something but i installed it alredy. I can start dota now, but when i start a game it is not... displaying correctly. For example when i pick a hero the 3d modell is covered in some kind of a lasershow and the map...... i looked around a bit think it is because of the drivers and i should have mesa 9. Steam can show the system specs and it says that i have nouveau Gallium 0.4 on NVAA as driver and 3.0 Mesa 10.0.0-devel (git-1100093 saucy-oibaf-ppa) as driverversion and OpenGL 3.0 i am a noob on linux and need step by step guides please

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >