Search Results

Search found 87275 results on 3491 pages for 'dhcp server'.

Page 7/3491 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Automatic allocation(not Dynamic Allocation) on Windows DHCP server

  - by Kazoom

  DHCP supports three different mechanisms for IP address allocation: Manual allocation: the server's administrator creates a configuration for the server that includes the MAC address and IP address of each DHCP client that will be able to get an address: functionally equivalent to BOOTP though the protocol is incompatible. Automatic allocation: the server's administrator creates a configuration for the server that includes only IP addresses, which it gives out to clients. An IP address, once associated with a MAC address, is permanently associated with it until the server's administrator intervenes. Dynamic allocation: like automatic allocation except that the server will track leases and give IP addresses whose lease has expired to other DHCP clients How can i configure the automatic allocation on Windows 2000 or XP DHCP server? i can think of setting the lease to unlimited period, but i m not sure if the computer shutsdown gracefully it will make the ip address available to other machine.

  Read the article

• Managing DHCP with Cobbler and multiple NICs

  - by William

  Hi, I'm trying to setup Cobbler for PXE booting and I want it to also manage DHCP. The issue is I only want one of the two available NICs to manage DHCP. Is there a way to specify which NIC Cobbler will use for DHCP? Thank you.

  Read the article

• Can OpenVPN invoke DHCP Client?

  - by Ency

  I have got working VPN connection through openvpn, but I would like to use also my DHCP server and not openvpn's push feature. Currently everything works fine, but I have to manually start dhcp client, eg. dhclient tap0 and I get IP and other important stuff from my DHCP, is there any directive which start DHCP Client when connection is established? There is my client's config: remote there.is.server.com float dev tap tls-client #pull port 1194 proto tcp-client persist-tun dev tap0 #ifconfig 192.168.69.201 255.255.255.0 #route-up "dhclient tap0" #dhcp-renew ifconfig 0.0.0.0 255.255.255.0 ifconfig-noexec ifconfig-nowarn ca /etc/openvpn/ca.crt cert /etc/openvpn/encyNtb_openvpn_client.crt key /etc/openvpn/encyNtb_openvpn_client.key dh /etc/openvpn/dh-openvpn.dh ping 10 ping-restart 120 comp-lzo verb 5 log-append /var/log/openvpn.log Here comes server's config: mode server tls-server dev tap0 local servers.ip.here port 1194 proto tcp-server server-bridge # Allow comunication between clients client-to-client # Allowing duplicate users per one certificate duplicate-cn # CA Certificate, VPN Server Certificate, key, DH and Revocation list ca /etc/ssl/CA/certs/ca.crt cert /etc/ssl/CA/certs/openvpn_server.crt key /etc/ssl/CA/private/openvpn_server.key dh /etc/ssl/CA/dh/dh-openvpn.dh crl-verify /etc/ssl/CA/crl.pem # When no response is recieved within 120seconds, client is disconected keepalive 10 60 persist-tun persist-key user openvpn group openvpn # Log and Connected clients file log-append /var/log/openvpn verb 3 status /var/run/openvpn/vpn.status 10 # Compression comp-lzo #Push data to client push "route-gateway 192.168.69.1" push "redirect-gateway def1"

  Read the article

• Clonezilla-SE with another DHCP Server in LAN

  - by aleroot

  I want to install Clonezilla-Server(192.168.1.100) in a network that already have a DHCP Server (dd-wrt with dnsmasq - 192.168.1.1). I've installed Clonezilla-SE on ubuntu Server 10.10, once installed and configured Clonezilla Server i've removed the DHCP-Server and set pxe server address in dnsmasq configuration on DHCP Server : dhcp-boot=pxelinux.0,,192.168.1.100 When i try to start from PXE a Computer in the network clonezilla start, but give me an error that the ipddress of the machine is not given by the clonezilla server and can't continue ... Someone has already tried to configure Clonezilla-SE in a similar enviroment? Is there some configuration on DRBL server of Clonezilla that i need to do ?

  Read the article

• Clonezilla-SE with another DHCP Server in LAN

  - by aleroot

  I want to install Clonezilla-Server(192.168.1.100) in a network that already have a DHCP Server (dd-wrt with dnsmasq - 192.168.1.1). I've installed Clonezilla-SE on ubuntu Server 10.10, once installed and configured Clonezilla Server i've removed the DHCP-Server and set pxe server address in dnsmasq configuration on DHCP Server : dhcp-boot=pxelinux.0,,192.168.1.100 When i try to start from PXE a Computer in the network clonezilla start, but give me an error that the ipddress of the machine is not given by the clonezilla server and can't continue ... Someone has already tried to configure Clonezilla-SE in a similar enviroment? Is there some configuration on DRBL server of Clonezilla that i need to do ?

  Read the article

• pfSense - DHCP Relay

  - by Patrick

  I have 3 pfSense boxes acting as routers on a single subnet (172.22.12.0/26). Router A - 172.22.12.1 Router B - 172.22.12.17 Router C - 172.22.12.33 I want Router A to be the only DHCP server. Router C has DHCP relay enabled that points to Router B. Router B then has DHCP relay enabled that points to Router A. Like this: Router C -- Router B -- Router A (DHCP Server) Router B gets an IP from Router A, but Router C does not. Any ideas why this configuration isn't working? Thanks.

  Read the article

• Kickstarting an Ubuntu Server 10.04 installation (DHCP fails)

  - by William

  I'm trying to automate the network installation of Ubuntu 10.04 LTS with an anaconda kickstart and everything seems to running except for the initial DHCP autoconfiguration. The installer attempts to configure the install via DHCP but fails on its first attempt. This brings me to a prompt where I can retry DHCP and it seems to always work on the second attempt. My issue is that this is not really automated if I have to hit retry for DHCP. Is there something I can add to the kickstart file so that it will automatically retry or better yet not fail the first time? Thanks. Kickstart: # System language lang en_US # Language modules to install langsupport en_US # System keyboard keyboard us # System mouse mouse # System timezone timezone America/New_York # Root password rootpw --iscrypted $1$unrsWyF2$B0W.k2h1roBSSFmUDsW0r/ # Initial user user --disabled # Reboot after installation reboot # Use text mode install text # Install OS instead of upgrade install # Use Web installation url --url=http://10.16.0.1/cobbler/ks_mirror/ubuntu-10.04-x86_64/ # System bootloader configuration bootloader --location=mbr # Clear the Master Boot Record zerombr yes # Partition clearing information clearpart --all --initlabel # Disk partitioning information part swap --size 512 part / --fstype ext3 --size 1 --grow # System authorization infomation auth --useshadow --enablemd5 %include /tmp/pre_install_ubuntu_network_config # Always install the server kernel. preseed --owner d-i base-installer/kernel/override-image string linux-server # Install the Ubuntu Server seed. preseed --owner tasksel tasksel/force-tasks string server # Firewall configuration firewall --disabled # Do not configure the X Window System skipx %pre wget "http://10.16.0.1/cblr/svc/op/trig/mode/pre/system/Test-D" -O /dev/null # Network information # Start pre_install_network_config generated code # Start of code to match cobbler system interfaces to physical interfaces by their mac addresses # Start eth0 # Configuring eth0 (00:1A:64:36:B1:C8) if ip -o link show | grep -i 00:1A:64:36:B1:C8 then IFNAME=$(ip -o link show | grep -i 00:1A:64:36:B1:C8 | cut -d" " -f2 | tr -d :) echo "network --device=$IFNAME --bootproto=dhcp" >> /tmp/pre_install_ubuntu_network_config fi # End pre_install_network_config generated code %packages openssh-server

  Read the article

• SQL Server 2012 : The Data Tools installer is now available

  - by AaronBertrand

  Last week when RC0 was released, the updated installer for "Juneau" (SQL Server Data Tools) was not available. Depending on how you tried to get it, you either ended up on a blank search page, or a page offering the CTP3 bits. Important note: the CTP3 Juneau bits are not compatible with SQL Server 2012 RC0. If you already have Visual Studio 2010 installed (meaning Standard/Pro/Premium/Ultimate), you will need to install Service Pack 1 before continuing. You can get to the installer simply by opening...(read more)

  Read the article

• SQL SERVER – Copy Statistics from One Server to Another Server

  - by pinaldave

  I was recently working on a performance tuning project in Dubai (yeah I was able to see the tallest tower from the window of my work place). I had a very interesting learning experience there. There was a situation where we wanted to receive the schema of original database from a certain client. However, the client was not able to provide us any data due to privacy issues. The schema was very important because without having an access to underlying data, it was a bit difficult to judge the queries etc. For example, without any primary data, all the queries are running in 0 (zero) milliseconds and all were using nested loop as there were no data to be returned. Even though we had CPU offending queries, they were not doing anything without the data in the tables. This was really a challenge as I did not have access to production server data and I could not recreate the scenarios as production without data. Well, I was confused but Ruben from Solid Quality Mentors, Spain taught me new tricks. He suggested that when table schema is generated, we can create the statistics consequently. Here is how we had done that: Once statistics is created along with the schema, without data in the table, all the queries will work as how they will work on production server. This way, without access to the data, we were able to recreate the same scenario as production server on development server. When observed at the script, you will find that the statistics were also generated along with the query. You will find statistics included in WITH STATS_STREAM clause. What a very simple and effective script. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: SQL Statistics, Statistics

  Read the article

• Presenting "What's New in SQL Server Denali" for WVPASS

  - by AaronBertrand

  Recently I was asked by John Sterrett ( blog | twitter ) to present to his SQL Server user group ( WVPASS ) in Wheeling, West Virginia. Well, today is the day, and I will be presenting, "What's new in SQL Server Denali" at tonight's meeting, sponsored by SQL Sentry . The slide deck is attached below; the samples are available here . If you attended this presentation, please feel free to provide feedback at SpeakerRate ....(read more)

  Read the article

• Security updates for all supported versions of SQL Server

  - by AaronBertrand

  It's patch Tuesday! [ UPDATE June 19 : Please see my follow-up post about this security update.] Today Microsoft released a security bulletin covering several issues that could potentially affect SQL Server; these exploits include remote code execution, denial of service, information disclosure and elevation of privilege. You should test these patches on all machines running SQL Server, including those running only client tools (e.g. Management Studio or Management Studio Express). The updates affect...(read more)

  Read the article

• Thoughts on Nexus in SQL Server PDW

  - by jamiet

  I have been on a SQL Server Parallel Data Warehouse (aka PDW) training course this week and was interested to learn that you can't (yet) use SQL Server Management Studio (SSMS) against PDW, instead they ship a 3rd party tool called Nexus Chameleon. This was a bit of a disappointment at the beginning of the week (I'd prefer parity across SQL Server editions) but actually, having used Nexus for 3 days, I'm rather getting used to it. Some of it is a bit clunky (e.g. everything goes via an ODBC DSN) but once you get into using it its the epitome of "it just works". For example, over the past few years I have come to rely on intellisense in SSMS and have learnt to cope with its nuances. There is no intellisense in Nexus but you know what....I don't really miss it that much. In a sense its a breath of fresh air not having to hope that you've crossed the line into that will it work/won't it work grey area with SSMS intellisense. And I don't end up with writing @@CONNECTIONS instead of FROM anymore (anyone else suffer from this?) :) Moreover, Nexus is a standalone tool. Its not a bunch of features shoehorned into something else (Visual Studio). Another thing I like about Nexus is that you can actually do something with your resultset client-side. Take a look at the screenshots below:   You can see Nexus allows you to group a resultest by a column or set of columns. Nice touch. I know that many people have submitted Connect requests asking for the ability to do similar things in SSMS that would mean we don't have to copy resultsets into Excel (I know I have) - Nexus is a step in that direction. Its refreshing to use a tool that just gets out of the way yet still has some really useful features. How ironic that it gets shipped inside an edition of SQL Server! If I had the option of using Nexus in my day job I suspect that over time I would probably gravitate back to SSMS because as yet I haven’t really stretched Nexus’ capabilities, overall SSMS *does* have more features and up until now I've never really had any objections to it ... but its been an interesting awakening into the nuances that plague SSMS. Anyone else used Nexus? Any thoughts on it? @Jamiet

  Read the article

• SQL Server 2008 Unique Problem for bring DB Online...

  - by Nai

  This is my error I am facing TITLE: Microsoft.SqlServer.Smo Set offline failed for Database 'Go3D_Retailer ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\ftrow_Go3D_catalog.ndf". Operating system error 2: "2(failed to retrieve text for this error. Reason: 15105)". Database 'Go3D_Retailer' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 5120) Background to this error I've been trying to move my destination logshipping database to another physical server for analysis purposes. Because I do not have active directory set up, I had to hack my process by using the same username/password for both the source and destination servers to get the process to work. Following that, I used this guy's solution to move the destination database to another server. However, this error occurs when I try to bring the database back online. I don't have an E drive on my server and I have no idea why it's trying to open a file from E drive. I have over a 100gb left on my hard disk so it's definitely not a space issue. This sounds like a bug... Any ideas? I'm running SQL Server 2008 Enterprise edition on Windows Server 2008 R2 64bit

  Read the article

• SQL Server 2008 R2 and copy-only default value in SQL Server Management Studio

  - by user102718

  We are using Tivoli Storage Manager for taking backups of the database but sometimes our consultants need to take separate backup copies of the database using Management Studio. If they forget to mark the "copy-only" flag in Management Studio they will mess up the Tivoli's backups (we are running our databases in FULL-recovery mode). Is there a way to set the default value of the Copy-Only flag to true in the Management Studio's "Back Up Database"-window?

  Read the article

• Is DHCP required on a Win2003 secondary DNS server?

  - by Mark

  We have a secondary DNS server and we've been noticing that the DNS.exe process is getting rather large. (Like, rebooting the server large) I read something somewhere that 2k3 has two relevant memory leak issues, one is the DNS (supposedly fixed in 2007), and another for DHCP. DHCP is running on this server, but I don't see why. Hence my question. Is the DHCP service required for (secondary) DNS to function? Server has: 24 cores (X5650), 8GB RAM

  Read the article

• ISC DHCP - Force clients to get a new IP address, instead of the being re-issued their previous lease's IP

  - by kce

  We are in the middle of a migration of our DHCP and DNS services from a Debian-based server to a Windows Server 2008 R2 implementation. The Debian server is running isc-dhcpd-V3.1.1. All of workstations are configured to have fixed-addresses between .3 and .40 (the motivation behind that choice is mostly management/political much like here). DHCP leases are given out in the range of .100 to .175. Statically configured servers live in the .200 block and above (which is mostly empty). When we move to the Windows platform, management/political considerations require me to move the IP ranges around again. We would like to keep .1 - .10 reserved for network appliances, switches, and other infrastructure. .200 will remain designated for servers. The addressing space in between should be available to clients and IPs should be dynamically allocated (Edit: instead of automatic as originally mentioned) by the server. My Address Pool on the Windows Server looks like this: 192.168.0.1 192.168.0.254 (Address range for distribution) 192.168.0.1 192.168.0.10 (IP addresses excluded from distribution) 192.168.0.200 192.168.0.254 (IP addresses excluded from distribution) Currently, we have all of our clients still on the .3 - .40 range, and a few machines still active in the .100 - .175 (although there are lots devices that are powered off that still have expired leases with IPs from that range). Since the lease "database" isn't shared between the old and new DHCP server how can I prevent clients from receiving a lease with an IP address that is currently being held by client with a non-expired lease from the old DHCP server? If I just expand the range on the Debian DHCP server to be 192.168.0.10 - 192.168.0.199 is there a way to force clients to not re-use their old IP address when they send their DHCPDISCOVER? Can I make the Windows DHCP server be authoritiative like the ISC implementation? The dhcpd.conf from the Debian server: ddns-update-style none; authoritative; default-lease-time 43200; #12 hours max-lease-time 86400; #24 hours subnet 192.168.0.0 netmask 255.255.255.0 { option routers 192.168.0.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.0.255; range 192.168.0.100 192.168.0.175; } host workstation-1 { hardware ethernet 00:11:22:33:44:55; fixed-address 192.168.0.3; } ... and so on until 192.168.0.40

  Read the article

• How to configure Windows Server 2008 DHCP to supply unique subnet to a remote site?

  - by caleban

  The Main site hosts the only Windows Server. Windows Server 2008 R2 Domain Controller running AD, DNS, DHCP, Exchange 2007. Remote site has no Windows server. Main site subnet is 192.168.1.0/24 Remote site subnet is 192.168.2.0/24 The Windows Server at Main site is supplying 192.168.1.0/24 via DHCP to hosts at the local site where it resides. Is it possible to configure that Windows Server to supply 192.168.2.0/24 to hosts at the Remote site and if so how? We could use the Cisco router at the Remote site to supply DHCP but if possible we'd like to use the Windows Server at the Main site to supply DHCP.

  Read the article

• Make dhcp assign same IP and hostname for different interfaces at one machine

  - by Egeshi

  I have a feeling that question itself looks stupid but it is not. Please let me clarify. I have dynamic DNS with BIND and NIS configured at my LAN and have laptop which I am using in both wireless and wired mode. I mean that sometimes I have to use wired interface to achieve higher throughput but most of time I don't need it and using wireless mode. Everything works great. Issue is that I want both interfaces get same IP from DHCP. Just for convenient firewall setup. If I add both hosts to dhcp in this manner # bt wireless host bt { hardware ethernet 00:1f:1f:62:60:28; fixed-address 172.16.77.110; } # bt wired host bt { hardware ethernet 00:14:22:b7:5a:de; fixed-address 172.16.77.110; } DHCP says logs following message dhcpd: Dynamic and static leases present for 172.16.77.110 dhcpd: Remove host declaration bt-wired or remove 172.16.77.110 dhcpd: from the dynamic address pool for 172.16/16 Host records are added outside of any subnet, but it makes no difference if I put them there, effect is still the same. This is not critical but either is not my whim because even if DHCP seems to work fine for that "bt" host, I cannot make connection TO it from remote machine anymore with this definitely incorrect DHCP config. I'd be thankful if one spares a minute for advice about how to configure DHCPD correctly. UPDATE. I realize that there's a soulution to assign different hostname in DHCP config but would like to use benefits of short host names.

  Read the article

• Cannot install mysql-server (5.5.22) on clean ubuntu 12.04 LTS server

  - by Christian

  I have a clean minimal install of Ubuntu 12.04 LTS server 64-bit (just a root user and nothing alse installed). I tried to install the mysql-server with the following command: apt-get install mysql-server The installation aborts with the following error: The following NEW packages will be installed: libdbd-mysql-perl{a} libmysqlclient18{a} mysql-client mysql-client-5.5{a} mysql-client-core-5.5{a} mysql-common{a} mysql-server mysql-server-5.5{a} mysql-server-core-5.5{a} 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 11.7 kB/26.2 MB of archives. After unpacking 94.5 MB will be used. Do you want to continue? [Y/n/?] y Get: 1 http://mirror.eu.oneandone.net/ubuntu/ubuntu/ precise/main mysql-client all 5.5.22-0ubuntu1 [11.7 kB] Fetched 11.7 kB in 0s (567 kB/s) Preconfiguring packages ... Selecting previously unselected package mysql-common. (Reading database ... 54008 files and directories currently installed.) Unpacking mysql-common (from .../mysql-common_5.5.22-0ubuntu1_all.deb) ... Selecting previously unselected package libmysqlclient18. Unpacking libmysqlclient18 (from .../libmysqlclient18_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package libdbd-mysql-perl. Unpacking libdbd-mysql-perl (from .../libdbd-mysql-perl_4.020-1build2_amd64.deb) ... Selecting previously unselected package mysql-client-core-5.5. Unpacking mysql-client-core-5.5 (from .../mysql-client-core-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-client-5.5. Unpacking mysql-client-5.5 (from .../mysql-client-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-server-core-5.5. Unpacking mysql-server-core-5.5 (from .../mysql-server-core-5.5_5.5.22-0ubuntu1_amd64.deb) ... Processing triggers for man-db ... Setting up mysql-common (5.5.22-0ubuntu1) ... Selecting previously unselected package mysql-server-5.5. (Reading database ... 54189 files and directories currently installed.) Unpacking mysql-server-5.5 (from .../mysql-server-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-client. Unpacking mysql-client (from .../mysql-client_5.5.22-0ubuntu1_all.deb) ... Selecting previously unselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.5.22-0ubuntu1_all.deb) ... Processing triggers for ureadahead ... Processing triggers for man-db ... Setting up libmysqlclient18 (5.5.22-0ubuntu1) ... Setting up libdbd-mysql-perl (4.020-1build2) ... Setting up mysql-client-core-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-client-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-server-core-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... 120502 10:17:41 [Note] Plugin 'FEDERATED' is disabled. 120502 10:17:41 InnoDB: The InnoDB memory heap is disabled 120502 10:17:41 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120502 10:17:41 InnoDB: Compressed tables use zlib 1.2.3.4 120502 10:17:41 InnoDB: Initializing buffer pool, size = 128.0M 120502 10:17:41 InnoDB: Completed initialization of buffer pool 120502 10:17:41 InnoDB: highest supported file format is Barracuda. 120502 10:17:41 InnoDB: Waiting for the background threads to start 120502 10:17:42 InnoDB: 1.1.8 started; log sequence number 1595675 120502 10:17:42 InnoDB: Starting shutdown... 120502 10:17:42 InnoDB: Shutdown completed; log sequence number 1595675 start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Setting up mysql-client (5.5.22-0ubuntu1) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.5 mysql-server I am completely lost because I have tried everything on the web to solve my problem (clearning the install, reconfiguring with dpkg, manually editing the my.cnf). I also set up a new clean install but nothing helped. What am I doing wrong? New information: The file /var/log/upstart/mysql.log contains the following error after the installation: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld in /etc/apparmor.d/tunables/global at line 17: Could not open 'tunables/proc'

  Read the article

• Windows 7 Desktop/Start Menu Redirection: Server O/S: Windows Server 2003 And Server 2008

  - by Moody Tech

  Hi, I am new here so I am might be asking a question which has already been answered [however I can't see it in the suggested answers above] I manage a network which is split into a parent domain and a child domain. Recently I have been looking at when to migrate to Windows 7. The child domain users [authenticated by the 2008 based (child) domain] get the redirected Desktop [as expected] but not the Start Menu. The parent domain users [authenticated by the 2003 based (parent) domain] get neither desktop nor Start Menu redirected. Does anyone here know how to successfully redirect the properties for these users as desired? Many thanks.

  Read the article

• SQL SERVER – Right Aligning Numerics in SQL Server Management Studio (SSMS)

  - by pinaldave

  SQL Server Management Studio is my most favorite tool and the comfort it provides to user is sometime very amazing. Recently I was retrieving numeric data in SSMS and I found it is very difficult to read them as they were all right aligned. Please pay attention to following image, you will notice that it is not easier to read the digits as we are used to read the numbers which are right aligned. I immediately thought before I go for any other tricks I should check the query properties. I right clicked on query properties and I found following option. I checked option Right align numeric values and it just worked fine. Do you have any other similar tricks which do you practice often. I prefer to also include column headers in the result set as it gives me proper perspective of which column I have selected. Sometime little tips like this helps a lot in productivity, I encourage you to share your tips. I will publish it with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• DHCP reply packets do not make it into KVM instance in OpenStack

  - by Lorin Hochstein

  I'm running a KVM instance inside of OpenStack, and it isn't getting an IP address from the DHCP server. Using tcpdump, I can see the request and reply packets on vnet0 of the compute host: # tcpdump -i vnet0 -n port 67 or port 68 tcpdump: WARNING: vnet0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vnet0, link-type EN10MB (Ethernet), capture size 65535 bytes 19:44:56.176727 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:44:56.176785 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:44:56.177315 IP 10.40.0.1.67 > 10.40.0.3.68: BOOTP/DHCP, Reply, length 319 19:45:02.179834 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:45:02.179904 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:45:02.180375 IP 10.40.0.1.67 > 10.40.0.3.68: BOOTP/DHCP, Reply, length 319 However, if I do the same thing on eth0 inside the KVM instance, I only see the request packets, not the reply packets. What would prevent the packets from making it from vnet0 of the host to eth0 of the guest? My host is running Ubuntu 12.04 and my guest is running CentOS 6.3. Note that I have added this rule in my iptables, but it doesn't resolve the issue: -A POSTROUTING -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill The instance corresponds to vnet0 and is connected via br100: # brctl show bridge name bridge id STP enabled interfaces br100 8000.54781a8605f2 no eth1 vnet0 vnet1 virbr0 8000.000000000000 yes Here's the full iptables-save: # Generated by iptables-save v1.4.12 on Tue Apr 2 19:47:27 2013 *nat :PREROUTING ACCEPT [8323:2553683] :INPUT ACCEPT [7993:2494942] :OUTPUT ACCEPT [6158:461050] :POSTROUTING ACCEPT [6455:511595] :nova-compute-OUTPUT - [0:0] :nova-compute-POSTROUTING - [0:0] :nova-compute-PREROUTING - [0:0] :nova-compute-float-snat - [0:0] :nova-compute-snat - [0:0] :nova-postrouting-bottom - [0:0] -A PREROUTING -j nova-compute-PREROUTING -A OUTPUT -j nova-compute-OUTPUT -A POSTROUTING -j nova-compute-POSTROUTING -A POSTROUTING -j nova-postrouting-bottom -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -j MASQUERADE -A nova-compute-snat -j nova-compute-float-snat -A nova-postrouting-bottom -j nova-compute-snat COMMIT # Completed on Tue Apr 2 19:47:27 2013 # Generated by iptables-save v1.4.12 on Tue Apr 2 19:47:27 2013 *mangle :PREROUTING ACCEPT [7969:5385812] :INPUT ACCEPT [7905:5363718] :FORWARD ACCEPT [158:48190] :OUTPUT ACCEPT [6877:8647975] :POSTROUTING ACCEPT [7035:8696165] -A POSTROUTING -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A POSTROUTING -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill COMMIT # Completed on Tue Apr 2 19:47:27 2013 # Generated by iptables-save v1.4.12 on Tue Apr 2 19:47:27 2013 *filter :INPUT ACCEPT [2196774:15856921923] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [2447201:1170227646] :nova-compute-FORWARD - [0:0] :nova-compute-INPUT - [0:0] :nova-compute-OUTPUT - [0:0] :nova-compute-inst-19 - [0:0] :nova-compute-inst-20 - [0:0] :nova-compute-local - [0:0] :nova-compute-provider - [0:0] :nova-compute-sg-fallback - [0:0] :nova-filter-top - [0:0] -A INPUT -j nova-compute-INPUT -A INPUT -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A INPUT -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A INPUT -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A FORWARD -j nova-filter-top -A FORWARD -j nova-compute-FORWARD -A FORWARD -d 192.168.122.0/24 -o virbr0 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 192.168.122.0/24 -i virbr0 -j ACCEPT -A FORWARD -i virbr0 -o virbr0 -j ACCEPT -A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -j nova-filter-top -A OUTPUT -j nova-compute-OUTPUT -A nova-compute-FORWARD -i br100 -j ACCEPT -A nova-compute-FORWARD -o br100 -j ACCEPT -A nova-compute-inst-19 -m state --state INVALID -j DROP -A nova-compute-inst-19 -m state --state RELATED,ESTABLISHED -j ACCEPT -A nova-compute-inst-19 -j nova-compute-provider -A nova-compute-inst-19 -s 10.40.0.1/32 -p udp -m udp --sport 67 --dport 68 -j ACCEPT -A nova-compute-inst-19 -s 10.40.0.0/16 -j ACCEPT -A nova-compute-inst-19 -p tcp -m tcp --dport 22 -j ACCEPT -A nova-compute-inst-19 -p icmp -j ACCEPT -A nova-compute-inst-19 -j nova-compute-sg-fallback -A nova-compute-inst-20 -m state --state INVALID -j DROP -A nova-compute-inst-20 -m state --state RELATED,ESTABLISHED -j ACCEPT -A nova-compute-inst-20 -j nova-compute-provider -A nova-compute-inst-20 -s 10.40.0.1/32 -p udp -m udp --sport 67 --dport 68 -j ACCEPT -A nova-compute-inst-20 -s 10.40.0.0/16 -j ACCEPT -A nova-compute-inst-20 -p tcp -m tcp --dport 22 -j ACCEPT -A nova-compute-inst-20 -p icmp -j ACCEPT -A nova-compute-inst-20 -j nova-compute-sg-fallback -A nova-compute-local -d 10.40.0.3/32 -j nova-compute-inst-19 -A nova-compute-local -d 10.40.0.4/32 -j nova-compute-inst-20 -A nova-compute-sg-fallback -j DROP -A nova-filter-top -j nova-compute-local COMMIT # Completed on Tue Apr 2 19:47:27 2013

  Read the article

• SQL SERVER – Read Only Files and SQL Server Management Studio (SSMS)

  - by pinaldave

  Just like any other Developer or DBA SQL Server Management Studio is my favorite application. Any any moment of the time I have multiple instances of the same application are open and I am working on it. Recently, I have come across a very interesting feature in SSMS related to “Read Only” files. I believe it is a little unknown feature as well so decided to write a blog about the same. First create a read only SQL file. You can make any file read by Right Click >> Properties >> Select Attribute Read Only. Now open the same file in SQL Server Management Studio. You will find that besides the file name there is a small ‘lock’ icon. This small icon indicates that the file is read only. Now let us attempt to edit the read only file. It will let us edit the file any way we want, however when we attempt to save it, it gives following pop-up value. The options in the pop-up are self explanatory and I liked it. The goal of the read only file is to prevent users to make un-intended changes. However, when a user should have complete control over the user file. User should be aware that the file is read only but if he wants to edit the file or save as a new file the choices should be present in front of it and the pop-up menu precisely captures the same. Now let us check option related to this feature in SSMS. Go to Menu >> Options >> Environment >> Documents You will find the third option which is “Allow editing of read-only files; warn when attempt to save”. In the above scenario it was already checked. Let us uncheck the same and do the same exercise which we have done earlier. I closed all the earlier window to avoid confusion. With the new option selected when I attempt to even modify the Read Only file, it gives me totally different pop up screen. It gives me an option like “Edit In-Memory”, “Make Writeable” etc. When you select “Edit In-Memory” it allows you to edit the file and later you can save as new file – just like the earlier scenario which we have discussed. . If clicked on the Make Writeable it will remove the restriction of the Read Only and file can be edited as pleased. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• I try install dhcp3-server, but /etc/init.d/dhcp3-server file is missing. Whats going on?

  - by hydroparadise

  I've found several how-to's that essentially go through the same process in setting up DHCP. Here's a link that has the list of step needed install and setup DHCP. I follow all the steps and find that the sudo /etc/init.d/dhcp3-server restart portion returns command not found only to reveal the the file doesn't even exist. I've installed (sudo apt-get install dhcp3-server) and uninstalled (sudo apt-get remove dhcp3-server) two or three times. I'm pretty sure my config files are good because I've had to check them three times. But I don't think I'm to that point of being able to see them action it. I cant control the process. Why is the file missing? How is it supposed to get there? Help?

  Read the article

• Local DNS server (bind) and the router DHCP

  - by Luca

  I just set up an internal http server for internal use (I set up Redmine), in a small network (30 or so PCs). I set up the http server on a virtual box ubuntu, that runs also the DNS server (bind). In the DNS lookup I added the Redmine server name (redmine.engserver <- 192.168.1.14) and as forwarders the outside ISP DNS IP adresses. I am using a small wi-fi router (ASUS RT-N66U) as DHCP (and as gateway). In the DHCP config page I set up as DNS the ubuntu server IP (it is fixed 192.168.1.14). Now when I connect a new PC to the network, the DHCP router issues its new IP and as DNS servers it issues: primary: 192.168.1.14 (ubuntu machine) and seconary 192.168.1.1 (the router itself). ipconfig /all Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 248539109 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-15-AA-3F-D0-67-E5-49-A7-EF DNS Servers . . . . . . . . . . . : 192.168.1.14 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Before changing the DHCP setting on the router, I would always get only one DNS server: 192.168.1.1 (which uses probably DNS forwarding to external public DNS services). The problem is this: If in my browser I type www.google.com, it works all the time. If in the browser I type http://redmine.engserver/ it works most of the time, but sometimes it ends up with a yahoo page search or something else. In the DNS cache it shows as (Server not found). ipconfig /displaydns I looked with wireshark and it seems like sometimes the client PC interrogates the secondary DNS (192.168.1.1) instead of the first 192.168.1.14. Obviously this one is a public domain and it does not have the redmine.engserver entry. What is wrong in this configuration? Is it even legitimate to have 2 DNS (one internal and one forwarded by the router) which are inconsistent? Is there another way to have a local name service in a small office network? Why is the router DHCP issuing itself as DNS?

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >