Search Results

Search found 281 results on 12 pages for 'discrete'.

Page 7/12 | < Previous Page | 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Dell Latitude e6520 gaming capabilities?

    - by user1072185
    I am purchasing a very reduced Dell Latitude e6520 from a friend and was wondering what kinds of games I could play on it and what resolutions. I'm not buying it for gaming purposes, but I am curious. The specs are as follows: Intel® Core™ i7-2720QM (2.20GHz, 6M cache) with Turbo BoostTechnology 2.0 nVidia® NVS™ 4200M 512MB DDR3 Discrete Graphics for Quad Core upon further research, the CPU requires this graphic card. 4.0GB, DDR3-1333MHz SDRAM 500GB 7200rpm Hard Drive I may upgrade to 8GB memory, depending if I am bogged down, what do you guys think?

    Read the article

  • How to watch 3D on Acer "3D Ready" projector?

    - by glenneroo
    We have here a Acer P1200 DLP projector which is "3D Ready" (using the BrilliantColor™ DarkChip™ 3) and documentation was not included in the packaging. We don't have a Blu-ray player and have no intention of purchasing one in the near future so I'm looking for a way to view encoded or streamed content. My question is: How is it possible to watch 3D content? What extra hardware/software will I need? EDIT: Found this information in the user manual: DLP 3D function: Choose while using DLP 3D glasses, quad buffer (NVIDIA/ATI…) graphic card and HQFS format file or DVD with corresponding SW player. 3D Sync L/R: If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/ right image sequence to get the correct image (for DLP 3D). ...but I'm still at a loss. What is a quad buffer graphics card?

    Read the article

  • Fourier transform software

    - by CFP
    Hello everyone! After spending a lot of time searching for this, I thought that some SuperUser gurus might know the answer :) I'm searching for an open source application to compute an FFT, that could: * Import a list of points from a text file (in any format, I could write conversion scripts if needed), for example 0,1; 1,2; 4,5 * Compute the associated discrete transform, and output the list of coefficients Ideally, it would also display the plot and the associated fourier decomposition on the same graph, to allow comparison, but this is not absolutely needed. It can be either on Windows or on Linux/Unix. Can you think of a solution? Thanks, CFP.

    Read the article

  • Dual boot OSX and Windows 7 natively

    - by Phill
    I'm considering getting one of those new fancy Mac Book Pro's with the fancy screens, but after reading some stuff on the internets about running Windows 7 with bootcamp: https://discussions.apple.com/thread/2770866?start=0&tstart=0 It seems you can't use the integrated graphics with windows, this causes windows to chew the battery life: I am afraid it is not possible. Since Apple introduced dual graphics chip laptops, they kept the low power/embedded GPU hidden under Window and they expose only the power hungry discrete GPU. It feels that this is being done on purpose so that it appears to users that OS X offers a better experience and battery life over Windows. So running bootcamp and windows kills the battery, running in parallels means you don't get accelerated 3d support (or something along those lines), so you don't get the performance out of it. I'm wondering: Is it possible to natively dual boot Windows 7 on a MBP, and if so would/does that give windows access to the integrated graphics to be able to not rape the battery?

    Read the article

  • Can't Use Switchable Graphics

    - by Rev
    I can't get my switchable graphics cards working on my Acer 4820TG laptop. It came installed with Windows 7, but I've installed the RTM build of Windows 8. I have to keep the "Graphics" setting on the BIOS set to "Discrete," if it's set to "Switchable" the screen turns black after the boot animation is complete. The machine has an Intel graphics card and an AMD Mobility Radeon HD 5650, and I know that the Intel card is working. I've seen it work a couple of times with Windows 8 installed, but for some reason it just doesn't anymore. I know that it's not broken, because when I plug in a secondary monitor, and move the cursor to the right, I can see it on that monitor. Are there drivers or something I need to install? I've tried a number of drivers and utilities from Acer's website, none of which have fixed the problem.

    Read the article

  • Use Excel Color Scale Formatting with Text

    - by stumpylog
    I use Excel sheets to track the status of tasks through a set of discrete statuses. I'd like to be able to format these automatically, with the start being red, the end being green and progressing through the combination colors in the middle. Status1 (Red) Status2 (More Red than Green) Status3 (More Green than Red) Status4 (Green) The "Color Scales" option under Conditional Formatting seems like it could be made to work, but it wants numbers. So, my question, can it be done? Using conditional formatting or other formulas to achieve the desired affect?

    Read the article

  • Can a webite have too many bindings?

    - by justSteve
    IIS7.x on a win08 web version on a dedicated server. I have a site that's serving a few dozen affiliates - many of which are hitting me via a subdomain from their own root domain - all of which have a subdomain specific to their account. E.G. my affiliate named 'Acme' hits my site via: myApp.Acme.com (his root, my app) Acme.MyDomain.com (his account within my root domain) Currently I'm adding each of these as a binding entry in IIS (targeting a discrete IP, not '*'). As I ramp this up to include more affiliates I'm wondering if I should be concerned about how many binding this site handles. Proabaly, in Acme's case I can do without the 'Acme.MyDomain.com' because, in reality, all traffic takes place via myApp.Acme.com. Mine is a niche site - very volume compared to most. At what point do I worry about all those bindings? thx

    Read the article

  • Parallelism in .NET – Introduction

    - by Reed
    Parallel programming is something that every professional developer should understand, but is rarely discussed or taught in detail in a formal manner.  Software users are no longer content with applications that lock up the user interface regularly, or take large amounts of time to process data unnecessarily.  Modern development requires the use of parallelism.  There is no longer any excuses for us as developers. Learning to write parallel software is challenging.  It requires more than reading that one chapter on parallelism in our programming language book of choice… Today’s systems are no longer getting faster with each generation; in many cases, newer computers are actually slower than previous generation systems.  Modern hardware is shifting towards conservation of power, with processing scalability coming from having multiple computer cores, not faster and faster CPUs.  Our CPU frequencies no longer double on a regular basis, but Moore’s Law is still holding strong.  Now, however, instead of scaling transistors in order to make processors faster, hardware manufacturers are scaling the transistors in order to add more discrete hardware processing threads to the system. This changes how we should think about software.  In order to take advantage of modern systems, we need to redesign and rewrite our algorithms to work in parallel.  As with any design domain, it helps tremendously to have a common language, as well as a common set of patterns and tools. For .NET developers, this is an exciting time for parallel programming.  Version 4 of the .NET Framework is adding the Task Parallel Library.  This has been back-ported to .NET 3.5sp1 as part of the Reactive Extensions for .NET, and is available for use today in both .NET 3.5 and .NET 4.0 beta. In order to fully utilize the Task Parallel Library and parallelism, both in .NET 4 and previous versions, we need to understand the proper terminology.  For this series, I will provide an introduction to some of the basic concepts in parallelism, and relate them to the tools available in .NET.

    Read the article

  • Code Bubbles: Disruption comes to the IDE

    - by andrewbrust
    If you’re like me, you might see the open source Eclipse IDE as a copy or, more generously, a port of the Microsoft’s Visual Studio for the non-.NET world.  It’s not that Microsoft invented the IDE (I would credit Borland with that), but they really took the idea and ran with it for the first version of Visual Studio .NET in 2002.  The question is whether someone outside of Microsoft could take the modern IDE yet another major step forward in both principle and productivity. I think that has actually happened already, and I think the innovator in question is a second-year Computer Science PhD student at Brown, named Andrew Bragdon.  His project, which he calls Code Bubbles, is an IDE that allows for editing, debugging and exploration of code in “bubbles” which remind me a little bit of the discrete note tiles on OneNote…but they’re much more than that.  Bubbles actually allow for call stack traversal, saved debug sessions, sophisticated breakpoint and value watch behaviors and more.  And because bubbles, unlike windows, are borderless, and focus on code fragments rather than whole files, the de-cluttering effect is unbelievably liberating.  The best way to understand what Code Bubbles does is to watch the screencast video:     Code Bubbles is an IDE for Java development.  Why didn’t Microsoft come up with something like this for .NET devs?  Between the existing features in Visual Studio 2010, its WPF code editor, and the fact that OneNote’s UI bears some affinity to Code Bubbles’, it’s interesting that Microsoft still has not thought outside of its own “box” to get us something like this. Heck, that’s easy for me to say.  But it’s easy for you to say that you’d like something like this in Visual Studio sometime soon.  That’s because the ASP.NET site within UserVoice is taking votes on this very issue.  Just click this link and vote! Thanks to my fellow Microsoft Regional Director Sondre Bjellås for making me aware of Code Bubbles, and to RD Steve Smith for creating the UserVoice voting option.

    Read the article

  • Enable compiz on intel core i5 (Nvidia GT330M) based laptop

    - by Eshwar
    Hi, I am trying to enable compiz on my laptop via Desktop Effects but it does not allow it. I modified the xorg.conf file as on the compiz wiki but still no luck. So can someone just tell me how to enable compiz desktop on an Intel i5 based system. This is an Arrandale processor so its got the graphics bit on the processor itself. My system also has a discrete graphics card (Nvidia GT330M - yup its those hybrid graphics combos n- not Optimus). As far as i know the nvidia gpu is not being used since the intel one is enabled and there is no bios route to disable it. The laptop is a Dell Vostro 3700 with bios version A10 I did lotsa google searches about intel compiz, etc but not a single conclusive guide as to how to enable it. so my guess is it should work out of the box. but it doesn't. glxinfo gives me: name of display: :0.0 Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". 3 GLXFBConfigs: visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat ---------------------------------------------------------------------- Segmentation fault lsbusb gives me: 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 18) 01:00.0 VGA compatible controller [0300]: nVidia Corporation GT216 [GeForce GT 330M] [10de:0a29] (rev a2)

    Read the article

  • General directions on developing a server side control system for JS/Canvas Action RPG

    - by Billy Ninja
    Well, yesterday I asked on anti-cheat JS, and confirmed what I kind of already knew that it's just not possible. Now I wanna measure roughly how hard it is to implement a server side checking that is agnostic to client input, that does not mess with the game experience so much. I don't wanna waste to much resource on this matter, since it's going to be initially a single player game, that I may or would like to introduce some kind of ranking, trading system later on. I'd rather deliver better more cool game features instead. I don't wanna have to guarantee super fast server response to keep the game going lag free. I'd rather go with more loose discrete control of key variables and instances. Like store user's action on a fifo buffer on the client, and push that actions to the server gradually. I'd love to see a elegant, generic solution that I could plug into my client game logic root (not having to scatter treatments everywhere in my client js) - and have few classes on Node.js server that could handle that - without having to mirror/describe all of my game entities a second time on the server.

    Read the article

  • Glenn Fiedler's fixed timestep with fake threads

    - by kaoD
    I've implemented Glenn Fiedler's Fix Your Timestep! quite a few times in single-threaded games. Now I'm facing a different situation: I'm trying to do this in JavaScript. I know JS is single-threaded, but I plan on using requestAnimationFrame for the rendering part. This leaves me with two independent fake threads: simulation and rendering (I suppose requestAnimationFrame isn't really threaded, is it? I don't think so, it would BREAK JS.) Timing in these threads is independent too: dt for simulation and render is not the same. If I'm not mistaken, simulation should be up to Fiedler's while loop end. After the while loop, accumulator < dt so I'm left with some unspent time (dt) in the simulation thread. The problem comes in the draw/interpolation phase: const double alpha = accumulator / dt; State state = currentState*alpha + previousState * ( 1.0 - alpha ); render( state ); In my render callback, I have the current timestamp to which I can subtract the last-simulated-in-physics-timestamp to have a dt for the current frame. Should I just forget about this dt and draw using the physics thread's dt? It seems weird, since, well, I want to interpolate for the unspent time between simulation and render too, right? Of course, I want simulation and rendering to be completely independent, but I can't get around the fact that in Glenn's implementation the renderer produces time and the simulation consumes it in discrete dt sized chunks. A similar question was asked in Semi Fixed-timestep ported to javascript but the question doesn't really get to the point, and answers there point to removing physics from the render thread (which is what I'm trying to do) or just keeping physics in the render callback too (which is what I'm trying to avoid.)

    Read the article

  • Enum.HasFlag

    - by Scott Dorman
    An enumerated type, also called an enumeration (or just an enum for short), is simply a way to create a numeric type restricted to a predetermined set of valid values with meaningful names for those values. While most enumerations represent discrete values, or well-known combinations of those values, sometimes you want to combine values in an arbitrary fashion. These enumerations are known as flags enumerations because the values represent flags which can be set or unset. To combine multiple enumeration values, you use the logical OR operator. For example, consider the following: public enum FileAccess { None = 0, Read = 1, Write = 2, }   class Program { static void Main(string[] args) { FileAccess access = FileAccess.Read | FileAccess.Write; Console.WriteLine(access); } } The output of this simple console application is: The value 3 is the numeric value associated with the combination of FileAccess.Read and FileAccess.Write. Clearly, this isn’t the best representation. What you really want is for the output to look like: To achieve this result, you simply add the Flags attribute to the enumeration. The Flags attribute changes how the string representation of the enumeration value is displayed when using the ToString() method. Although the .NET Framework does not require it, enumerations that will be used to represent flags should be decorated with the Flags attribute since it provides a clear indication of intent. One “problem” with Flags enumerations is determining when a particular flag is set. The code to do this isn’t particularly difficult, but unless you use it regularly it can be easy to forget. To test if the access variable has the FileAccess.Read flag set, you would use the following code: (access & FileAccess.Read) == FileAccess.Read Starting with .NET 4, a HasFlag static method has been added to the Enum class which allows you to easily perform these tests: access.HasFlag(FileAccess.Read) This method follows one of the “themes” for the .NET Framework 4, which is to simplify and reduce the amount of boilerplate code like this you must write. Technorati Tags: .NET,C# 4

    Read the article

  • The dreaded Brightness issue (Fn keys + Max brightness)

    - by Adam
    I'm trying to get some control over the brightness of my Samsung QX411 (Integrated Intel and discrete Nvidia, though Ubuntu doesn't see the latter yet, I'll play around with Bumblebee later) Using the FN+up/down lowers the screen brightness from max to one peg down or back up. If I try to bring the brightness down any more, it just flickers and stays the same. I can lower the brightness in Settings, but that's delicate and gets reverted to max if I open up the brightness settings again, or log out. The closest I got was adding acpi_backlight=vendor to a line in /etc/default/grub, (source) I could consequently lower the brightness a couple of pegs down to the minimum with FN+down, but then it's as if the problem got inversed, and I'd get stuck in the bottom tier, I could only increase the brightness by one peg and back down. Rebooting would revert to max brightness. acpi_osi=, acpi_osi=Linux, acpi_osi=vendor, acpi_osi='!Windows 2012', acpi_backlight=Linux, acpi_backlight='!Windows 2012' don't do anything for me. I've also tried adding echo 2000 > /sys/class/backlight/intel_backlight/brightness to /etc/rc.local, where my max value from cat /sys/class/backlight/intel_backlight/brightness is 4648, which didn't do anything. (same result with echo 2000 > /sys/class/backlight/acpi_video0/brightness) source Samsung tools also didn't help in this regard. I've spent hours on this, it's getting quite frustrating. Any help would be greatly appreciated.

    Read the article

  • How to re-configure graphics from Intel integrated to Intel / ATI switchable?

    - by Bucic
    There are lots of 'how to get switchable graphics to work' guides but I found none on how to configure a system for switchable graphics operation on Ubuntu from the ground up, nor explaining the current driver situation for particular computer models (integrated+discrete combinations). Example: https://help.ubuntu.com/community/HybridGraphics My system being mature and on Intel integrated card also makes things complicated. System information: Ubuntu 12.04 amd64, installed clean with system configured to use only the integrated Intel card Lenovo Thinkpad T500 Intel GMA 4500MHD / ATI Mobility Radeon HD 3650 Current situation: Mature and up-to-date system with no configuration changes to what's given above. I've made a backup image of the system (Clonezilla) so regardless of what's written below let's assume it's our starting point. If something in What I have already tried is not clear you may as well diregard it. What I have already tried: Configuring BIOS to switchable graphics and: Installing Additional Hardware drivers - returned an error. Installing proprietary amd-driver-installer-12.6-legacy-x86.x86_64.run automatically - system starts to 'low-graphics mode'. Tried fixing as per https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6.2C_special_case_for_Intel.2BAC8-ATI_hybrid_graphics Got lost, gave up. Please note that while configuring BIOS for integrated graphics only is pretty straightforward, configuring for switchable graphics is not.

    Read the article

  • links for 2010-03-31

    - by Bob Rhubart
    Andy Mulholland: Rethinking the narrow and deep expertise model "We increasingly realise that we have to read requirements in a more open way to decide what techniques can be used, what business experience can be added, etc, so the whole idea of encouraging ‘cross’ discipline understanding seems to look increasingly necessary as we look at how technology touches every part of business, and/or any other aspect of life. It is time to rethink the narrow and deep expertise model and consider T-shaped approaches where the depth is complimented by the width to understand how it might be used and how it fits with other capabilities and disciplines too." -- Andy Mulholland (tags: enterprisearchitecture) @vambenepe: Smoothing a discrete world "For the short term (until we sell one) there are three cars in my household. A manual transmission, an automatic and a CVT (continuous variable transmission). This makes me uniquely qualified to write about Cloud Computing." -- William Vambenepe (tags: otn oracle cloud) @fteter: The Price of Progress "I wonder about the price of progress on the business world. Do some of us get attached to old business models or software applications? Do we resist change for the better for emotional reasons? Are we sometimes impediments to progress just because we don't want things to change?" -- Oracle ACE Director Floyd Teter (tags: otn oracle oracleace progress innovation) Pat Shepherd: Enterprise Architecture should not be Arbitrary "If done properly the Business, Application and Information architectures are nailed down BEFORE any technological direction (SOA or otherwise) is set. Those 3 layers and Governance (people and processes), IMHO, are layers that should not vary much as they have everything to do with understanding the business -- from which technological conclusions can later be drawn." - Pat Shepherd, responding to a post by Jordan Braunstein. (tags: oracle otn enterprisearchitecture soa)

    Read the article

  • GRE subject Computer science

    - by Maddy.Shik
    How do I prepare for the GRE Computer Science subject test? Are there any standard text books I should follow? Agree that its under graduation level and one doesn't need to dig to deep for it. I have done my computer engineering from a college who ranks in top 20 in India. So may be my curriculum has not been that good as compared to international students. Since now i want to get admission in to world renowned university's Ph. D. program. I want to enhance my basic skills up to a level to beat other international students in competition. I want to know good book references which are recommended by professors in international school like CMU, MIT, Standford etc. Like for Algorithms Coreman is considered very good. Good books builds concepts from very basic so that one doesn't need to mug up even a basic concepts. Coreman is just too good with good blend of Mathematics and programming concepts. Definitely Test paper are must but that can be practiced once one has read text books thoroughly. Besides its been 2 years i passed out from college so its is essential for me to revise all concepts from text books. Please tell me standard text books for each subject like Computer Architecture, Database Design, Operating Systems, Discrete Maths etc.

    Read the article

  • Extreme Optimization Numerical Libraries for .NET – Part 1 of n

    - by JoshReuben
    While many of my colleagues are fascinated in constructing the ultimate ViewModel or ServiceBus, I feel that this kind of plumbing code is re-invented far too many times – at some point in the near future, it will be out of the box standard infra. How many times have you been to a customer site and built a different variation of the same kind of code frameworks? How many times can you abstract Prism or reliable and discoverable WCF communication? As the bar is raised for whats bundled with the framework and more tasks become declarative, automated and configurable, Information Systems will expose a higher level of abstraction, forcing software engineers to focus on more advanced computer science and algorithmic tasks. I've spent the better half of the past decade building skills in .NET and expanding my mathematical horizons by working through the Schaums guides. In this series I am going to examine how these skillsets come together in the implementation provided by ExtremeOptimization. Download the trial version here: http://www.extremeoptimization.com/downloads.aspx Overview The library implements a set of algorithms for: linear algebra, complex numbers, numerical integration and differentiation, solving equations, optimization, random numbers, regression, ANOVA, statistical distributions, hypothesis tests. EONumLib combines three libraries in one - organized in a consistent namespace hierarchy. Mathematics Library - Extreme.Mathematics namespace Vector and Matrix Library - Extreme.Mathematics.LinearAlgebra namespace Statistics Library - Extreme.Statistics namespace System Requirements -.NET framework 4.0  Mathematics Library The classes are organized into the following namespace hierarchy: Extreme.Mathematics – common data types, exception types, and delegates. Extreme.Mathematics.Calculus - numerical integration and differentiation of functions. Extreme.Mathematics.Curves - points, lines and curves, including polynomials and Chebyshev approximations. curve fitting and interpolation. Extreme.Mathematics.Generic - generic arithmetic & linear algebra. Extreme.Mathematics.EquationSolvers - root finding algorithms. Extreme.Mathematics.LinearAlgebra - vectors , matrices , matrix decompositions, solvers for simultaneous linear equations and least squares. Extreme.Mathematics.Optimization – multi-d function optimization + linear programming. Extreme.Mathematics.SignalProcessing - one and two-dimensional discrete Fourier transforms. Extreme.Mathematics.SpecialFunctions

    Read the article

  • Why doesn't Bumblebee work with Nvidia GT640M?

    - by Dickson Wong
    I've done a clean install of Ubuntu 12.04 from a liveCD on a Samsung Series 7 Chronos with a 3rd Gen i7 and the Nvidia GeForce GT 640M. I've followed this: (https://wiki.ubuntu.com/Bumblebee#Installation) to install bumblebee so I can switch to my discrete GPU. I have not used ironhide, or preivous bumblee since it's a clean install. When I use optirun, optirun says it can't initialize the GPU: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ERROR]Aborting because fallback start is disabled. I've looked at the troubleshooting page for bumblebee and I have the correct driver and do not think I have aspci disabled. Also, my keyboard becomes very unresponsive and my mouse skips and isn't smooth after optirun crashes. The only thing to fix this is a reboot. Here's my lspci | grep VGA output: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0fd2 (rev ff) It seems Ubuntu can see my graphics card. I don't really know what's going on.

    Read the article

  • Can One Get a Solid Programming Foundation Without Going To College/University?

    - by Daniel
    First, I have already searched the site and read all the previous "self-taught vs. college" topics. The majority of the answers defended that going to college was the best choice, for two main reasons: Going to college gives you the paper, which is essential to landing jobs, especially in tough economic times. Going to college gives you a solid programming base, teaching you the principles that will be essential regardless of the language/path you take after. Here comes my question: I am not worried about reason 1 at all, because I already have my own company (I build websites/ do affiliate marketing) and a stable financial situation, so I am pretty sure I won't need to look around for a job. I am worried about reason 2 though. That is, I want to make sure I'll have as solid a programming foundation as anyone else out there, and I am wondering if that is possible with self-learning. Suppose I take my time to study the very basics, like discrete maths, algorithm design, programming logic, computer architecture, Assembly, C programming, databases and data structures - mostly using books,online resources and lots of coding. Say I spend 1-2 years covering those basics. Do you think my foundation would be solid, or still lack in comparison to someone who went to college?

    Read the article

  • How can I perform 2D side-scroller collision checks in a tile-based map?

    - by bill
    I am trying to create a game where you have a player that can move horizontally and jump. It's kind of like Mario but it isn't a side scroller. I'm using a 2D array to implement a tile map. My problem is that I don't understand how to check for collisions using this implementation. After spending about two weeks thinking about it, I've got two possible solutions, but both of them have some problems. Let's say that my map is defined by the following tiles: 0 = sky 1 = player 2 = ground The data for the map itself might look like: 00000 10002 22022 For solution 1, I'd move the player (the 1) a complete tile and update the map directly. This make the collision easy because you can check if the player is touching the ground simply by looking at the tile directly below the player: // x and y are the tile coordinates of the player. The tile origin is the upper-left. if (grid[x][y+1] == 2){ // The player is standing on top of a ground tile. } The problem with this approach is that the player moves in discrete tile steps, so the animation isn't smooth. For solution 2, I thought about moving the player via pixel coordinates and not updating the tile map. This will make the animation much smoother because I have a smaller movement unit per frame. However, this means I can't really accurately store the player in the tile map because sometimes he would logically be between two tiles. But the bigger problem here is that I think the only way to check for collision is to use Java's intersection method, which means the player would need to be at least a single pixel "into" the ground to register collision, and that won't look good. How can I solve this problem?

    Read the article

  • Installing nvidia drivers causes computer to boot to command prompt.

    - by levesque
    Hi, I have an Asus u30jc laptop, which comes with the Optimus prime graphics card switching technology that is now supported under 2.6.35, so I decided to give it a try. First I made sure the discrete graphics card was activated and then I installed the drivers proposed by the ubuntu software repository (nvidia-current). However, after rebooting all I got was a command prompt. My graphics card is a nvidia 310M. This is on Ubuntu 10.10 64 bits. What can I do to diagnose/identify the source of this problem? UPDATE: The messsages in my syslog tell me to check the xorg log: Oct 11 12:42:59 u30jc-test gdm-binary[1095]: WARNING: GdmDisplay: display lasted 0.053144 seconds Oct 11 12:42:59 u30jc-test gdm-simple-slave[1450]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory Oct 11 12:42:59 u30jc-test gdm-binary[1095]: WARNING: GdmDisplay: display lasted 0.038176 seconds Oct 11 12:42:59 u30jc-test gdm-binary[1095]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors Which I did. I found this message in my /var/log/Xorg.0.log : Fatal server error: [ 113.540] no screens found [ 113.540] What does that mean?

    Read the article

  • CUDA & MSI GT60 with Optimus enabled GTX670M?

    - by user1076693
    I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

    Read the article

  • Naming a class that processes orders

    - by p.campbell
    I'm in the midst of refactoring a project. I've recently read Clean Code, and want to heed some of the advice within, with particular interest in Single Responsibility Principle (SRP). Currently, there's a class called OrderProcessor in the context of a manufacturing product order system. This class is currently performs the following routine every n minutes: check database for newly submitted + unprocessed orders (via a Data Layer class already, phew!) gather all the details of the orders mark them as in-process iterate through each to: perform some integrity checking call a web service on a 3rd party system to place the order check status return value of the web service for success/fail email somebody if web service returns fail constantly log to a text file on each operation or possible fail point I've started by breaking out this class into new classes like: OrderService - poor name. This is the one that wakes up every n minutes OrderGatherer - calls the DL to get the order from the database OrderIterator (? seems too forced or poorly named) - OrderPlacer - calls web service to place the order EmailSender Logger I'm struggling to find good names for each class, and implementing SRP in a reasonable way. How could this class be separated into new class with discrete responsibilities?

    Read the article

  • Pathfinding with MicroPather : costs calculations with sectors and portals

    - by Adan
    Hello, I'm considering using micropather to help me with pathfinding. I'm not using a discrete map : I'm working in 2d with sectors and portales. However, I'm just wondering what is the best way to compute costs with this library in this context. Just to be more clear about geometrical shapes I'm using : sectors are basically convex polygons, and portals are segments that lies on sector's edge. Micropather exposes a pure virtual Graph class that you must inherate and overrides 3 functions. I understand how pathfinding works, so there's no problem in overriding those functions. Right now, my implementation give me results, i.e I'm able to find a path in my map, but I'm not sure I'm using an optimal solution. For the AdjacentCost method : I just take the distance between sector's centers as the cost. I think a better solution should be to use the portal between the two sectors, compute its center, and then the cost should be : distance( sector A center, portal center ) + distance ( sector B center, portal center ). I'm pretty sure the approximation I'm using with just sector's center is enough for most cases, but maybe with thin and long sectors that are perpendicular, this approximation could mislead the A* algorithm. For the LeastCostEstimate method : I just take the midpoint of the two sectors. So, as you understand, I'm always working with sectors' centers, and it's working fine. And I'm pretty sure there's a better way to work. Any suggestions or feedbacks? Thanks in advance!

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12  | Next Page >