Search Results

Search found 3235 results on 130 pages for 'efi ex'.

Page 7/130 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • Why Is Faulty Behaviour In The .NET Framework Not Fixed?

    - by Alois Kraus
    Here is the scenario: You have a Windows Form Application that calls a method via Invoke or BeginInvoke which throws exceptions. Now you want to find out where the error did occur and how the method has been called. Here is the output we do get when we call Begin/EndInvoke or simply Invoke The actual code that was executed was like this:         private void cInvoke_Click(object sender, EventArgs e)         {             InvokingFunction(CallMode.Invoke);         }            [MethodImpl(MethodImplOptions.NoInlining)]         void InvokingFunction(CallMode mode)         {             switch (mode)             {                 case CallMode.Invoke:                     this.Invoke(new MethodInvoker(GenerateError));   The faulting method is called GenerateError which does throw a NotImplementedException exception and wraps it in a NotSupportedException.           [MethodImpl(MethodImplOptions.NoInlining)]         void GenerateError()         {             F1();         }           private void F1()         {             try             {                 F2();             }             catch (Exception ex)             {                 throw new NotSupportedException("Outer Exception", ex);             }         }           private void F2()         {            throw new NotImplementedException("Inner Exception");         } It is clear that the method F2 and F1 did actually throw these exceptions but we do not see them in the call stack. If we directly call the InvokingFunction and catch and print the exception we can find out very easily how we did get into this situation. We see methods F1,F2,GenerateError and InvokingFunction directly in the stack trace and we see that actually two exceptions did occur. Here is for comparison what we get from Invoke/EndInvoke System.NotImplementedException: Inner Exception     StackTrace:    at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)     at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)     at WindowsFormsApplication1.AppForm.InvokingFunction(CallMode mode)     at WindowsFormsApplication1.AppForm.cInvoke_Click(Object sender, EventArgs e)     at System.Windows.Forms.Control.OnClick(EventArgs e)     at System.Windows.Forms.Button.OnClick(EventArgs e) The exception message is kept but the stack starts running from our Invoke call and not from the faulting method F2. We have therefore no clue where this exception did occur! The stack starts running at the method MarshaledInvoke because the exception is rethrown with the throw catchedException which resets the stack trace. That is bad but things are even worse because if previously lets say 5 exceptions did occur .NET will return only the first (innermost) exception. That does mean that we do not only loose the original call stack but all other exceptions and all data contained therein as well. It is a pity that MS does know about this and simply closes this issue as not important. Programmers will play a lot more around with threads than before thanks to TPL, PLINQ that do come with .NET 4. Multithreading is hyped quit a lot in the press and everybody wants to use threads. But if the .NET Framework makes it nearly impossible to track down the easiest UI multithreading issue I have a problem with that. The problem has been reported but obviously not been solved. .NET 4 Beta 2 did not have changed that dreaded GetBaseException call in MarshaledInvoke to return only the innermost exception of the complete exception stack. It is really time to fix this. WPF on the other hand does the right thing and wraps the exceptions inside a TargetInvocationException which makes much more sense. But Not everybody uses WPF for its daily work and Windows forms applications will still be used for a long time. Below is the code to repro the issues shown and how the exceptions can be rendered in a meaningful way. The default Exception.ToString implementation generates a hard to interpret stack if several nested exceptions did occur. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; using System.Globalization; using System.Runtime.CompilerServices;   namespace WindowsFormsApplication1 {     public partial class AppForm : Form     {         enum CallMode         {             Direct = 0,             BeginInvoke = 1,             Invoke = 2         };           public AppForm()         {             InitializeComponent();             Thread.CurrentThread.CurrentUICulture = CultureInfo.InvariantCulture;             Application.ThreadException += new System.Threading.ThreadExceptionEventHandler(Application_ThreadException);         }           void Application_ThreadException(object sender, System.Threading.ThreadExceptionEventArgs e)         {             cOutput.Text = PrintException(e.Exception, 0, null).ToString();         }           private void cDirectUnhandled_Click(object sender, EventArgs e)         {             InvokingFunction(CallMode.Direct);         }           private void cDirectCall_Click(object sender, EventArgs e)         {             try             {                 InvokingFunction(CallMode.Direct);             }             catch (Exception ex)             {                 cOutput.Text = PrintException(ex, 0, null).ToString();             }         }           private void cInvoke_Click(object sender, EventArgs e)         {             InvokingFunction(CallMode.Invoke);         }           private void cBeginInvokeCall_Click(object sender, EventArgs e)         {             InvokingFunction(CallMode.BeginInvoke);         }           [MethodImpl(MethodImplOptions.NoInlining)]         void InvokingFunction(CallMode mode)         {             switch (mode)             {                 case CallMode.Direct:                     GenerateError();                     break;                 case CallMode.Invoke:                     this.Invoke(new MethodInvoker(GenerateError));                     break;                 case CallMode.BeginInvoke:                     IAsyncResult res = this.BeginInvoke(new MethodInvoker(GenerateError));                     this.EndInvoke(res);                     break;             }         }           [MethodImpl(MethodImplOptions.NoInlining)]         void GenerateError()         {             F1();         }           private void F1()         {             try             {                 F2();             }             catch (Exception ex)             {                 throw new NotSupportedException("Outer Exception", ex);             }         }           private void F2()         {            throw new NotImplementedException("Inner Exception");         }           StringBuilder PrintException(Exception ex, int identLevel, StringBuilder sb)         {             StringBuilder builtStr = sb;             if( builtStr == null )                 builtStr = new StringBuilder();               if( ex == null )                 return builtStr;                 WriteLine(builtStr, String.Format("{0}: {1}", ex.GetType().FullName, ex.Message), identLevel);             WriteLine(builtStr, String.Format("StackTrace: {0}", ShortenStack(ex.StackTrace)), identLevel + 1);             builtStr.AppendLine();               return PrintException(ex.InnerException, ++identLevel, builtStr);         }               void WriteLine(StringBuilder sb, string msg, int identLevel)         {             foreach (string trimmedLine in SplitToLines(msg)                                            .Select( (line) => line.Trim()) )             {                 for (int i = 0; i < identLevel; i++)                     sb.Append('\t');                 sb.Append(trimmedLine);                 sb.AppendLine();             }         }           string ShortenStack(string stack)         {             int nonAppFrames = 0;             // Skip stack frames not part of our app but include two foreign frames and skip the rest             // If our stack frame is encountered reset counter to 0             return SplitToLines(stack)                               .Where((line) =>                               {                                   nonAppFrames = line.Contains("WindowsFormsApplication1") ? 0 : nonAppFrames + 1;                                   return nonAppFrames < 3;                               })                              .Select((line) => line)                              .Aggregate("", (current, line) => current + line + Environment.NewLine);         }           static char[] NewLines = Environment.NewLine.ToCharArray();         string[] SplitToLines(string str)         {             return str.Split(NewLines, StringSplitOptions.RemoveEmptyEntries);         }     } }

    Read the article

  • Apple Service Diagnostic application on USB key?

    - by Matt 'Trouble' Esse
    I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

    Read the article

  • Windows 7 boot manager not localized on UEFI systems

    - by Massimo
    I originally posted this on SuperUser because I discovered this behaviour on my home computer, but this seems to be a general issue on UEFI systems, thus I'm posting here too; I also hope someone here can shed some light on what's going on. Italian version of Windows 7 x64 SP1, same installation media used for both situations. When running on BIOS systems, the boot manager is fully localized, both for the loading screen and for the F8 boot menu. When running on UEFI systems, the boot manager always runs in English, even if it's correctly configured to use the it-IT locale, as BCDEDIT clearly shows: Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Caricatore di avvio di Windows ------------------- identificatore {current} device partition=C: path \Windows\system32\winload.efi description Windows 7 locale it-IT inherit {bootloadersettings} recoverysequence {9ef36aa8-4188-11e3-909d-d32f0c3871c8} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} nx OptIn I also noticed something strange here; the motherboard setup shows "Windows Boot Manager" as the main boot option, while the actual boot disk is listed as the second one. Looks like the Windows Boot Manager is actually being loaded from somewhere else than the first partition of the first disk... what's going on here? Update I've also checked the EFI boot manager using bcdedit /enum FIRMWARE. That one looks correctly localized, too: Boot Manager per firmware --------------------- identificatore {fwbootmgr} displayorder {bootmgr} {9ef36aa4-4188-11e3-909d-d32f0c3871c8} {a30e8550-47e4-11e3-9ad1-806e6f6e6963} timeout 1 Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Applicazione firmware (101fffff) ------------------------------- identificatore {9ef36aa4-4188-11e3-909d-d32f0c3871c8} description CD/DVD Drive Applicazione firmware (101fffff) ------------------------------- identificatore {a30e8550-47e4-11e3-9ad1-806e6f6e6963} description Hard Drive

    Read the article

  • Any way to view dynamic java content ex-post? Browser session still open

    - by Ryan
    I feel like a grandpa from 1996 asking this, but is it at all possible to view a representation of a particular screen that was rendered as part of a java-based online checkout process I executed a couple days ago? I haven't cleared my browser cache or temp files or anything, and I don't think I've restarted the comp or even the browser since. I'm using mac OS X 10.6.8, and the page(s) were viewed with Chrome version 21.0.1180.89 in standard mode (not incognito). Specifically the page in question was part of Verizon Wireless's 'iconic' contract/checkout process, which leads the user through several pages to make selections on various criteria and seems to be based on java. (Obviously I'm a dummy regarding web stuff so the question is probably not very well defined, I'm happy to elaborate). ^This is the tl;dr question. If it belongs on another site please just let me know. This is what I've been able to figure out on my own, for the bored / ultra-helpful / those who could use a laugh at a noob fumbling his way around cache files with no idea what he's doing: The progress through the selection pages is very clear in Chrome's browser history, the sequential pages are: https://www.verizonwireless.com/b2c/accountholder/estore/phoneupgrade?execution=e3s2 https://www.verizonwireless.com/b2c/accountholder/estore/phoneupgrade?execution=e3s3 https://www.verizonwireless.com/b2c/accountholder/estore/phoneupgrade?execution=e3s4 https://www.verizonwireless.com/b2c/accountholder/estore/phoneupgrade?execution=e3s5 https://preorder.verizonwireless.com/iconic/?format=JSON&value={%22action%22:%22START_ORDER%22,%22custType%22:%22EXISTING%22,%22orderType%22:%22UPGRADE%22,%22lookupMtn%22:%22*(NumberA)*%22,%22lineData%22:[{%22mtn%22:%22*(NumberA)*%22,%22upgType%22:%22ALTERNATE_UPGRADE%22,%22eligibleMtn%22:%22*(NumberB)*%22}]} https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicOrder.do?format=JSON&value={%22action%22:%22START_ORDER%22,%22custType%22:%22EXISTING%22,%22orderType%22:%22UPGRADE%22,%22lookupMtn%22:%22*(NumberA)*%22,%22lineData%22:[{%22mtn%22:%22*(NumberA)*%22,%22upgType%22:%22ALTERNATE_UPGRADE%22,%22eligibleMtn%22:%22*(NumberB)*%22}]} https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicEligibility.do https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicDeviceSelection.do https://preorder.verizonwireless.com/iconic/iconic/secured/screens/PlanOptions.do https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicFeatures.do https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicAccessories.do https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicShipmentBilling.do https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicReview.do https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicPaymentCreditInfo.do https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicConfirmation.do The visual representation I would need could come from any of these pages, as the necessary information was shown at the top of each of them (although the two with long URLs were just like redirects or something). Of course, clicking the link to the page in History right now requires a new sign-in and just returns the user to the initial step for doing the process again; it does not pull up a representation of the page as it was seen several days ago. This I understand. Instead using Chrome's integrated cache viewer by typing about:cache in the address bar, I can search and find links that appear to be relevant, when I click on the link I just get a http header and a bunch of hexadecimal gobbledygook. I've tried to use the URL at the top of the cache and URLs in the http headers, but they take me to current versions of those pages and not the versions I saw during the checkout process. I tried this with a few of them but stopped because I noticed that it updated the date in the http header to the present moment and I don't want to take chances overwriting the cache files since I don't know what I'm doing. The links to the cache files look like this: https://login.verizonwireless.com/amserver/UI/Login?realm=vzw&goto=https%3A%2F%2Fpreorder.verizonwireless.com%3A443%2Ficonic%2Ficonic%2Fsecured%2Fscreens%2FPlanOptions.do https://preorder.verizonwireless.com/iconic/iconic/screens/customerTypeOverlay.jsp https://verizonwireless.tt.omtrdc.net/m2/verizonwireless/mbox/standard?mboxHost=login.verizonwireless.com&mboxSession=1347776884663-145230&mboxPC=1347609748832-956765.19&mboxPage=1347776884663-145230&screenHeight=1200&screenWidth=1920&browserWidth=1299&browserHeight=868&browserTimeOffset=-420&colorDepth=24&mboxCount=1&mbox=My_Verizon_Global&mboxId=0&mboxTime=1347751684666&mboxURL=https%3A%2F%2Flogin.verizonwireless.com%2Famserver%2FUI%2FLogin%3Frealm%3Dvzw%26goto%3Dhttps%253A%252F%252Fpreorder.verizonwireless.com%253A443%252Ficonic%252Ficonic%252Fsecured%252Fscreens%252FPlanOptions.do&mboxReferrer=&mboxVersion=41 and https://verizonwireless.tt.omtrdc.net/m2/verizonwireless/mbox/standard?mboxHost=login.verizonwireless.com&mboxSession=1347735676953-663794&mboxPC=1347609748832-956765.19&mboxPage=1347738347511-550383&screenHeight=1200&screenWidth=1920&browserWidth=1299&browserHeight=845&browserTimeOffset=-420&colorDepth=24&mboxCount=1&mbox=My_Verizon_Global&mboxId=0&mboxTime=1347713147517&mboxURL=https%3A%2F%2Flogin.verizonwireless.com%2Famserver%2FUI%2FLogin%3Frealm%3Dvzw%26goto%3Dhttps%253A%252F%252Fpreorder.verizonwireless.com%253A443%252Ficonic%252Ficonic%252Fsecured%252Fscreens%252FIconicOrder.do%253Fformat%253DJSON%2526value%253D%257B%252522action%252522%253A%252522START_ORDER%252522%252C%252522custType%252522%253A%252522EXISTING%252522%252C%252522orderType%252522%253A%252522UPGRADE%252522%252C%252522lookupMtn%252522%253A%252522*(NumberA)*%252522%252C%252522lineData%252522%253A%255B%257B%252522mtn%252522%253A%252522*(NumberA)*%252522%252C%252522upgType%252522%253A%252522ALTERNATE_UPGRADE%252522%252C%252522eligibleMtn%252522%253A%252522*(NumberB)*%252522%257D%255D%257D&mboxReferrer=&mboxVersion=41 and the http headers look like this: HTTP/1.1 200 OK Server: VZW Date: Sun, 16 Sep 2012 14:55:48 GMT Cache-control: private Pragma: no-cache Expires: 0 X-dsameversion: VZW Am_client_type: genericHTML Content-type: text/html;charset=ISO-8859-1 Content-Encoding: gzip Content-Length: 6220 and HTTP/1.1 200 OK Cache-Control: no-cache Date: Sun, 16 Sep 2012 16:16:30 GMT Content-Type: text/html Expires: Thu, 01 Jan 1970 00:00:00 GMT Content-Encoding: gzip X-Powered-By: Servlet/2.5 JSP/2.1 and HTTP/1.1 302 Moved Temporarily Server: VZW Date: Sun, 16 Sep 2012 16:29:32 GMT Cache-control: private Pragma: no-cache X-dsameversion: VZW Am_client_type: genericHTML Location: https://preorder.verizonwireless.com:443/iconic/iconic/secured/screens/IconicOrder.do?format=JSON&value={%22action%22:%22START_ORDER%22,%22custType%22:%22EXISTING%22,%22orderType%22:%22UPGRADE%22,%22lookupMtn%22:%22*(*(NumberA)*%22,%22lineData%22:[{%22mtn%22:%22*(NumberA)*%22,%22upgType%22:%22ALTERNATE_UPGRADE%22,%22eligibleMtn%22:%22*(NumberB)*%22}]} Content-length: 0 ^^this last one actually returned me to a page in the middle of the process when I used the "Location:" given in this http header rather than the URL at the top of the cache page (and was signed in to Verizon's website through a separate tab), but the page it took me to had already been updated to reflect new information, it wasn't presented as of the time the actions were taken several days ago when the page was originally viewed. (It's clear I can't achieve what I'm looking for by visiting current versions of these pages on the web…I should actually probably disable my network adapter while testing this out). The cache folder seems promising, but I don't know what to make of all that hexadecimal mess - if it contains what I'm looking for and if so, how to view it. Finally, the third thing I've come across is the Google Chrome cache folder on my local machine, at ~/Library/Caches/Google/Chrome/ then there are 'Default' and 'Media Cache' folders within. There are ~4,000 files in the former averaging ~100kb each, and 100 files in the latter averaging ~900kb each. The filenames all start "f_00xxxx" except for files titled data_0 through data_4 in each folder. I'm not sure how to observe the contents of these files and don't really want to start opening them up and potentially overwriting existing cached pages, as I notice there are already some holes in the arrangement of the files which I have never deleted manually. Hopefully this is an easy question to answer for someone who knows this stuff, admittedly web stuff is my weak point. As such, I've spent the past five hours searching around and trying to provide all the information I can. I'm probably asking for a miracle - like can those cached pages full of hexadecimal data be used to recreate the representation of the information that was on screen during the process? Or could screenshots of the previously viewed webpages be lurking in the /Caches folder? I have doubt because the content wasn't viewed at a permanent link, rather it seems like the on-screen information was served by Verizon's db, and probably securely so. I'm just not sure if Chrome saves the visual rendering of the page contents somewhere, even just temporarily. Alternatively I would be happy just to get the raw data that was on the page, even if not a visual representation…I just need to be able to demonstrate the phone line that was referenced on this page: https://preorder.verizonwireless.com/iconic/iconic/secured/screens/IconicFeatures.do . Can anyone point me in the right direction?

    Read the article

  • How can I set the BIOS/EFI security password on IBM System x servers by script/ASU?

    - by christian123
    I want to deploy IBM System x servers (like IBM System x 3550 M2) automatically and need to set a security password in the bios (actually it's uefi). I found this nice tool named ASU: http://www-947.ibm.com/systems/support/supportsite.wss/docdisplay?brandind=5000008&lndocid=MIGR-55021 Unfortunately I cannot see an option to set the password. Forum searches only show me people who want to reset the password using this tool. Does anybody know how to automatically deploy system passwords on IBM Intel-based servers?

    Read the article

  • Help with my application please! Can't open image(s) with error: External component has thrown an ex

    - by Brandon
    I have an application written in C# I believe and it adds images to a SQL Server 2005 Database. It requires .NET 3.5 to be installed on my computer. I installed .NET 3.5 and setup a database. It runs fine but then once it gets to image 100 when running on one computer, It stops and gives me this error: Can't open image(s) with error: External component has thrown an exception.... When I run the program on my own computer I am able to reach 300 images but then it stops after 300 images and gives me Can't open image(s) with error: External component has thrown an exception.... error once again. please help!

    Read the article

  • Are there HP Infinihost III ex drivers for windows available?

    - by Matt
    I picked up some infiniband cards off ebay for development/testing purposes. I was hoping that there would be some drivers available under windows 7, but it doesn't seem to be recognised by the OFED software which would seem to contain windows drivers. They are however immediately picked up by Ubuntu and drivers are loaded. Are these cards supported under windows 7 at all? mstflint under linux reports: Image type: Failsafe FW Version: 4.8.930 I.S. Version: 1 Device ID: 25208 Chip Revision: A0 Description: Node Port1 Port2 Sys image GUIDs: 001a4bffff0c9374 001a4bffff0c9375 001a4bffff0c9376 001a4bffff0c9377 Board ID: (HP_0060000001) VSD: PSID: HP_0060000001 From what I can tell they are the following: HP IB 4X DDR PCI-e DUAL PORT HCA (HP part number 409376-B21)

    Read the article

  • I recently converted my ex HDD from FAT32 to NTFS. now my pc doesn't find or pick up my NTFS HDD

    - by Jason Haniball
    I recently converted my external hard drive from FAT32 to NTFS using the Command Prompt. Everything was working fine, I copied a 7GB file to it and everything worked. The next day I switched on my PC, I couldn't and still can't find my external 1.5TB hard drive by my computer. I have about 500 to 800 GB of data on it that I really don't want to lose. Its a Iomega Seagate Freeagent HDD. Has no switch, it switched on automatically, don't know if that helps.

    Read the article

  • How do you create a report in Word (or other documentation software) that is linked directly with Ex

    - by NoCatharsis
    I believe my question may be best answered by using Access since that's more what it's made for. However, I don't have a license for Access here at work and trying to get one is pulling teeth. So I'm curious if there is any way to compile reports with data in an Excel 2007 sheet. The output can be .doc, .docx, .pdf - or anything else if there's a decent piece of free 3rd party software. This might be easiest solved by just creating another sheet in the same workbook and directly linking to the data I want to display in a report-esque format. But I wanted to see if SU could offer some more creative solutions.

    Read the article

  • SMO restore of SQL database doesn't overwrite

    - by Tom H.
    I'm trying to restore a database from a backup file using SMO. If the database does not already exist then it works fine. However, if the database already exists then I get no errors, but the database is not overwritten. The "restore" process still takes just as long, so it looks like it's working and doing a restore, but in the end the database has not changed. I'm doing this in Powershell using SMO. The code is a bit long, but I've included it below. You'll notice that I do set $restore.ReplaceDatabase = $true. Also, I use a try-catch block and report on any errors (I hope), but none are returned. Any obvious mistakes? Is it possible that I'm not reporting some error and it's being hidden from me? Thanks for any help or advice that you can give! function Invoke-SqlRestore { param( [string]$backup_file_name, [string]$server_name, [string]$database_name, [switch]$norecovery=$false ) # Get a new connection to the server [Microsoft.SqlServer.Management.Smo.Server]$server = New-SMOconnection -server_name $server_name Write-Host "Starting restore to $database_name on $server_name." Try { $backup_device = New-Object("Microsoft.SqlServer.Management.Smo.BackupDeviceItem") ($backup_file_name, "File") # Get local paths to the Database and Log file locations If ($server.Settings.DefaultFile.Length -eq 0) {$database_path = $server.Information.MasterDBPath } Else { $database_path = $server.Settings.DefaultFile} If ($server.Settings.DefaultLog.Length -eq 0 ) {$database_log_path = $server.Information.MasterDBLogPath } Else { $database_log_path = $server.Settings.DefaultLog} # Load up the Restore object settings $restore = New-Object Microsoft.SqlServer.Management.Smo.Restore $restore.Action = 'Database' $restore.Database = $database_name $restore.ReplaceDatabase = $true if ($norecovery.IsPresent) { $restore.NoRecovery = $true } Else { $restore.Norecovery = $false } $restore.Devices.Add($backup_device) # Get information from the backup file $restore_details = $restore.ReadBackupHeader($server) $data_files = $restore.ReadFileList($server) # Restore all backup files ForEach ($data_row in $data_files) { $logical_name = $data_row.LogicalName $physical_name = Get-FileName -path $data_row.PhysicalName $restore_data = New-Object("Microsoft.SqlServer.Management.Smo.RelocateFile") $restore_data.LogicalFileName = $logical_name if ($data_row.Type -eq "D") { # Restore Data file $restore_data.PhysicalFileName = $database_path + "\" + $physical_name } Else { # Restore Log file $restore_data.PhysicalFileName = $database_log_path + "\" + $physical_name } [Void]$restore.RelocateFiles.Add($restore_data) } $restore.SqlRestore($server) # If there are two files, assume the next is a Log if ($restore_details.Rows.Count -gt 1) { $restore.Action = [Microsoft.SqlServer.Management.Smo.RestoreActionType]::Log $restore.FileNumber = 2 $restore.SqlRestore($server) } } Catch { $ex = $_.Exception Write-Output $ex.message $ex = $ex.InnerException while ($ex.InnerException) { Write-Output $ex.InnerException.message $ex = $ex.InnerException } Throw $ex } Finally { $server.ConnectionContext.Disconnect() } Write-Host "Restore ended without any errors." }

    Read the article

  • Open an excel file using COM and save it as .xml file

    - by chupinette
    Hi. Im trying the following code: <?php $workbook = "D:\b2\\test.XLS"; $sheet = "Sheet1"; #Instantiate the spreadsheet component. $ex = new COM("Excel.sheet") or Die ("Did not connect"); #Get the application name and version print "Application name:{$ex->Application->value}<BR>" ; print "Loaded version: {$ex->Application->version}<BR>"; #Open the workbook that we want to use. $wkb = $ex->application->Workbooks->Open($workbook) or Die ("Did not open"); #Create a copy of the workbook, so the original workbook will be preserved. $ex->Application->ActiveWorkbook->SaveAs("D:\b2\Ourtest.xml"); #$ex->Application->Visible = 1; #Uncomment to make Excel visible. #Optionally, save the modified workbook $ex->Application->ActiveWorkbook->SaveAs("D:\Ourtest.xml"); #Close all workbooks without questioning $ex->application->ActiveWorkbook->Close("False"); unset ($ex); ?> This actually works and creates the Ourtest.xml file. But im getting characters like: ÐÏࡱá þÿ þÿÿÿ I have tried with SaveAs("D:\Ourtest.pdf") and it says the file has been corrupted or incorrectly decoded. Can anyone help me please?Thanks

    Read the article

  • FMOD.net streaming, callback and exinfo parameters

    - by Tesserex
    I posted a question on gamedev about how to play nsf files (NES console music) in FMOD. It didn't get any results, but since then I made some progress. I decided that the easiest method was just to compile an existing player into a dll and then call it from C# to populate my buffer. The problem now is getting it to sound right, and making sure all my paremeters are correct. Here are the facts so far: The nsf dll is dealing with shorts, so the data is PCM16. The sample nsf I'm using has a playback rate of 60 Hz. Just for playing around now, I'm using a frequency of 48000. Based on 2 and 3, the dll calculates a necessary buffer size of 48000 / 60hz = 800. This means it will render 800 shorts worth of buffer for every simulated NES frame. I've so far got my C# code to play the nsf, at the correct pitch and tempo, but it's very grainy / fuzzy, which I'm attributing to the fact that the FMOD read callback is giving a data length of 1600, whereas I should be expecting 800. I've tried playing around with all the numbers and it either crashes, or the music changes pitch, tempo, or both. Here's some of my C# code: uint channels = 1, frequency = 48000; FMOD.MODE mode = (FMOD.MODE.DEFAULT | FMOD.MODE.OPENUSER | FMOD.MODE.LOOP_NORMAL); FMOD.Sound sound = new FMOD.Sound(); FMOD.CREATESOUNDEXINFO ex = new FMOD.CREATESOUNDEXINFO(); ex.cbsize = Marshal.SizeOf(ex); ex.fileoffset = 0; ex.format = FMOD.SOUND_FORMAT.PCM16; // does this even matter? It doesn't change my results as long as it's long enough for one update ex.length = frequency; ex.numchannels = (int)channels; ex.defaultfrequency = (int)frequency; ex.pcmreadcallback = pcmreadcallback; ex.dlsname = null; // eventually I will calculate this with frequency / nsf hz, but I'm just testing for now ex.decodebuffersize = 800; // from the dll load_nsf_file("file.nsf", 8, (int)frequency); // 8 is the track number to play var result = system.createSound( (string)null, (mode | FMOD.MODE.CREATESTREAM), ref ex, ref sound); channel = new FMOD.Channel(); result = system.playSound(FMOD.CHANNELINDEX.FREE, sound, false, ref channel); private FMOD.RESULT PCMREADCALLBACK(IntPtr soundraw, IntPtr data, uint datalen) { // from the dll process_buffer(data, (int)800); // if I use datalen, it usually crashes (I can't get datalen to = 800 safely) return FMOD.RESULT.OK; } So here are some of my questions: What is the relationship between exinfo.decodebuffersize, frequency, and the datalen parameter of the read callback? With this code sample, it's coming in as 3200. I don't know where that factor of 4 between it and the decodebuffersize comes from. Is datalen in the callback referring to number of bytes, or shorts? The process_buffer function takes a short array and its length. I would expect fmod is talking about shorts as well because I told it PCM16. Maybe my playback quality is bad for some totally different reason. If so I have no idea where to begin solving that. Any ideas there?

    Read the article

  • An Honest look at SharePoint Web Services

    - by juanlarios
    INTRODUCTION If you are a SharePoint developer you know that there are two basic ways to develop against SharePoint. 1) The object Model 2) Web services. SharePoint object model has the advantage of being quite rich. Anything you can do through the SharePoint UI as an administrator or end user, you can do through the object model. In fact everything that is done through the UI is done through the object model behind the scenes. The major disadvantage to getting at SharePoint this way is that the code needs to run on the server. This means that all web parts, event receivers, features, etc… all of this is code that is deployed to the server. The second way to get to SharePoint is through the built in web services. There are many articles on how to manipulate web services, how to authenticate to them and interact with them. The basic idea is that a remote application or process can contact SharePoint through a web service. Lots has been written about how great these web services are. This article is written to document the limitations, some of the issues and frustrations with working with SharePoint built in web services. Ultimately, for the tasks I was given to , SharePoint built in web services did not suffice. My evaluation of SharePoint built in services was compared against creating my own WCF Services to do what I needed. The current project I'm working on right now involved several "integration points". A remote application, installed on a separate server was to contact SharePoint and perform an task or operation. So I decided to start up Visual Studio and built a DLL and basically have 2 layers of logic. An integration layer and a data layer. A good friend of mine pointed me to SOLID principles and referred me to some videos and tutorials about it. I decided to implement the methodology (although a lot of the principles are common sense and I already incorporated in my coding practices). I was to deliver this dll to the application team and they would simply call the methods exposed by this dll and voila! it would do some task or operation in SharePoint. SOLUTION My integration layer implemented an interface that defined some of the basic integration tasks that I was to put together. My data layer was about the same, it implemented an interface with some of the tasks that I was going to develop. This gave me the opportunity to develop different data layers, ultimately different ways to get at SharePoint if I needed to. This is a classic SOLID principle. In this case it proved to be quite helpful because I wrote one data layer completely implementing SharePoint built in Web Services and another implementing my own WCF Service that I wrote. I should mention there is another layer underneath the data layer. In referencing SharePoint or WCF services in my visual studio project I created a class for every web service call. So for example, if I used List.asx. I created a class called "DocumentRetreival" this class would do the grunt work to connect to the correct URL, It would perform the basic operation of contacting the service and so on. If I used a view.asmx, I implemented a class called "ViewRetrieval" with the same idea as the last class but it would now interact with all he operations in view.asmx. This gave my data layer the ability to perform multiple calls without really worrying about some of the grunt work each class performs. This again, is a classic SOLID principle. So, in order to compare them side by side we can look at both data layers and with is involved in each. Lets take a look at the "Create Project" task or operation. The integration point is described as , "dll is to provide a way to create a project in SharePoint". Projects , in this case are basically document libraries. I am to implement a way in which a remote application can create a document library in SharePoint. Easy enough right? Use the list.asmx Web service in SharePoint. So here we go! Lets take a look at the code. I added the List.asmx web service reference to my project and this is the class that contacts it:  class DocumentRetrieval     {         private ListsSoapClient _service;      d   private bool _impersonation;         public DocumentRetrieval(bool impersonation, string endpt)         {             _service = new ListsSoapClient();             this.SetEndPoint(string.Format("{0}/{1}", endpt, ConfigurationManager.AppSettings["List"]));             _impersonation = impersonation;             if (_impersonation)             {                 _service.ClientCredentials.Windows.ClientCredential.Password = ConfigurationManager.AppSettings["password"];                 _service.ClientCredentials.Windows.ClientCredential.UserName = ConfigurationManager.AppSettings["username"];                 _service.ClientCredentials.Windows.AllowedImpersonationLevel =                     System.Security.Principal.TokenImpersonationLevel.Impersonation;             }     private void SetEndPoint(string p)          {             _service.Endpoint.Address = new EndpointAddress(p);          }          /// <summary>         /// Creates a document library with specific name and templateID         /// </summary>         /// <param name="listName">New list name</param>         /// <param name="templateID">Template ID</param>         /// <returns></returns>         public XmlElement CreateLibrary(string listName, int templateID, ref ExceptionContract exContract)         {             XmlDocument sample = new XmlDocument();             XmlElement viewCol = sample.CreateElement("Empty");             try             {                 _service.Open();                 viewCol = _service.AddList(listName, "", templateID);             }             catch (Exception ex)             {                 exContract = new ExceptionContract("DocumentRetrieval/CreateLibrary", ex.GetType(), "Connection Error", ex.StackTrace, ExceptionContract.ExceptionCode.error);                             }finally             {                 _service.Close();             }                                      return viewCol;         } } There was a lot more in this class (that I am not including) because i was reusing the grunt work and making other operations with LIst.asmx, For example, updating content types, changing or configuring lists or document libraries. One of the first things I noticed about working with the built in services is that you are really at the mercy of what is available to you. Before creating a document library (Project) I wanted to expose a IsProjectExisting method. This way the integration or data layer could recognize if a library already exists. Well there is no service call or method available to do that check. So this is what I wrote:   public bool DocLibExists(string listName, ref ExceptionContract exContract)         {             try             {                 var allLists = _service.GetListCollection();                                return allLists.ChildNodes.OfType<XmlElement>().ToList().Exists(x => x.Attributes["Title"].Value ==listName);             }             catch (Exception ex)             {                 exContract = new ExceptionContract("DocumentRetrieval/GetList/GetListWSCall", ex.GetType(), "Unable to Retrieve List Collection", ex.StackTrace, ExceptionContract.ExceptionCode.error);             }             return false;         } This really just gets an XMLElement with all the lists. It was then up to me to sift through the clutter and noise and see if Document library already existed. This took a little bit of getting used to. Now instead of working with code, you are working with XMLElement response format from web service. I wrote a LINQ query to go through and find if the attribute "Title" existed and had a value of the listname then it would return True, if not False. I didn't particularly like working this way. Dealing with XMLElement responses and then having to manipulate it to get at the exact data I was looking for. Once the check for the DocLibExists, was done, I would either create the document library or send back an error indicating the document library already existed. Now lets examine the code that actually creates the document library. It does what you are really after, it creates a document library. Notice how the template ID is really an integer. Every document library template in SharePoint has an ID associated with it. Document libraries, Image Library, Custom List, Project Tasks, etc… they all he a unique integer associated with it. Well, that's great but the client came back to me and gave me some specifics that each "project" or document library, should have. They specified they had 3 types of projects. Each project would have unique views, about 10 views for each project. Each Project specified unique configurations (auditing, versioning, content types, etc…) So what turned out to be a simple implementation of creating a document library as a repository for a project, turned out to be quite involved.  The first thing I thought of was to create a template for document library. There are other ways you can do this too. Using the web Service call, you could configure views, versioning, even content types, etc… the only catch is, you have to be working quite extensively with CAML. I am not fond of CAML. I can do it and work with it, I just don't like doing it. It is quite touchy and at times it is quite tough to understand where errors were made with CAML statements. Working with Web Services and CAML proved to be quite annoying. The service call would return a generic error message that did not particularly point me to a CAML statement syntax error, or even a CAML error. I was not sure if it was a security , performance or code based issue. It was quite tough to work with. At times it was difficult to work with because of the way SharePoint handles metadata. There are "Names", "Display Name", and "StaticName" fields. It was quite tough to understand at times, which one to use. So it took a lot of trial and error. There are tools that can help with CAML generation. There is also now intellisense for CAML statements in Visual Studio that might help but ultimately I'm not fond of CAML with Web Services.   So I decided on the template. So my plan was to create create a document library, configure it accordingly and then use The Template Builder that comes with the SharePoint SDK. This tool allows you to create site templates, list template etc… It is quite interesting because it does not generate an STP file, it actually generates an xml definition and a feature you can activate and make that template available on a site or site collection. The first issue I experienced with this is that one of the specifications to this template was that the "All Documents" view was to have 2 web parts on it. Well, it turns out that using the template builder , it did not include the web parts as part of the list template definition it generated. It backed up the settings, the views, the content types but not the custom web parts. I still decided to try this even without the web parts on the page. This new template defined a new Document library definition with a unique ID. The problem was that the service call accepts an int but it only has access to the built in library int definitions. Any new ones added or created will not be available to create. So this made it impossible for me to approach the problem this way.     I should also mention that one of the nice features about SharePoint is the ability to create list templates, back them up and then create lists based on that template. It can all be done by end user administrators. These templates are quite unique because they are saved as an STP file and not an xml definition. I also went this route and tried to see if there was another service call where I could create a document library based no given template name. Nope! none.      After some thinking I decide to implement a WCF service to do this creation for me. I was quite certain that the object model would allow me to create document libraries base on a template in which an ID was required and also templates saved as STP files. Now I don't want to bother with posting the code to contact WCF service because it's self explanatory, but I will post the code that I used to create a list with custom template. public ServiceResult CreateProject(string name, string templateName, string projectId)         {             string siteurl = SPContext.Current.Site.Url;             Guid webguid = SPContext.Current.Web.ID;                        using (SPSite site = new SPSite(siteurl))             {                 using (SPWeb rootweb = site.RootWeb)                 {                     SPListTemplateCollection temps = site.GetCustomListTemplates(rootweb);                     ProcessWeb(siteurl, webguid, web => Act_CreateProject(web, name, templateName, projectId, temps));                 }//SpWeb             }//SPSite              return _globalResult;                   }         private void Act_CreateProject(SPWeb targetsite, string name, string templateName, string projectId, SPListTemplateCollection temps) {                         var temp = temps.Cast<SPListTemplate>().FirstOrDefault(x => x.Name.Equals(templateName));             if (temp != null)             {                             try                 {                                         Guid listGuid = targetsite.Lists.Add(name, "", temp);                     SPList newList = targetsite.Lists[listGuid];                     _globalResult = new ServiceResult(true, "Success", "Success");                 }                 catch (Exception ex)                 {                     _globalResult = new ServiceResult(false, (string.IsNullOrEmpty(ex.Message) ? "None" : ex.Message + " " + templateName), ex.StackTrace.ToString());                 }                                       }        private void ProcessWeb(string siteurl, Guid webguid, Action<SPWeb> action) {                        using (SPSite sitecollection = new SPSite(siteurl)) {                 using (SPWeb web = sitecollection.AllWebs[webguid]) {                     action(web);                 }                     }                  } This code is actually some of the code I implemented for the service. there was a lot more I did on Project Creation which I will cover in my next blog post. I implemented an ACTION method to process the web. This allowed me to properly dispose the SPWEb and SPSite objects and not rewrite this code over and over again. So I implemented a WCF service to create projects for me, this allowed me to do a lot more than just create a document library with a template, it now gave me the flexibility to do just about anything the client wanted at project creation. Once this was implemented , the client came back to me and said, "we reference all our projects with ID's in our application. we want SharePoint to do the same". This has been something I have been doing for a little while now but I do hope that SharePoint 2010 can have more of an answer to this and address it properly. I have been adding metadata to SPWebs through property bag. I believe I have blogged about it before. This time it required metadata added to a document library. No problem!!! I also mentioned these web parts that were to go on the "All Documents" View. I took the opportunity to configure them to the appropriate settings. There were two settings that needed to be set on these web parts. One of them was a Project ID configured in the webpart properties. The following code enhances and replaces the "Act_CreateProject " method above:  private void Act_CreateProject(SPWeb targetsite, string name, string templateName, string projectId, SPListTemplateCollection temps) {                         var temp = temps.Cast<SPListTemplate>().FirstOrDefault(x => x.Name.Equals(templateName));             if (temp != null)             {                 SPLimitedWebPartManager wpmgr = null;                               try                 {                                         Guid listGuid = targetsite.Lists.Add(name, "", temp);                     SPList newList = targetsite.Lists[listGuid];                     SPFolder rootFolder = newList.RootFolder;                     rootFolder.Properties.Add(KEY, projectId);                     rootFolder.Update();                     if (rootFolder.ParentWeb != targetsite)                         rootFolder.ParentWeb.Dispose();                     if (!templateName.Contains("Natural"))                     {                         SPView alldocumentsview = newList.Views.Cast<SPView>().FirstOrDefault(x => x.Title.Equals(ALLDOCUMENTS));                         SPFile alldocfile = targetsite.GetFile(alldocumentsview.ServerRelativeUrl);                         wpmgr = alldocfile.GetLimitedWebPartManager(PersonalizationScope.Shared);                         ConfigureWebPart(wpmgr, projectId, CUSTOMWPNAME);                                              alldocfile.Update();                     }                                        if (newList.ParentWeb != targetsite)                         newList.ParentWeb.Dispose();                     _globalResult = new ServiceResult(true, "Success", "Success");                 }                 catch (Exception ex)                 {                     _globalResult = new ServiceResult(false, (string.IsNullOrEmpty(ex.Message) ? "None" : ex.Message + " " + templateName), ex.StackTrace.ToString());                 }                 finally                 {                     if (wpmgr != null)                     {                         wpmgr.Web.Dispose();                         wpmgr.Dispose();                     }                 }             }                         }       private void ConfigureWebPart(SPLimitedWebPartManager mgr, string prjId, string webpartname)         {             var wp = mgr.WebParts.Cast<System.Web.UI.WebControls.WebParts.WebPart>().FirstOrDefault(x => x.DisplayTitle.Equals(webpartname));             if (wp != null)             {                           (wp as ListRelationshipWebPart.ListRelationshipWebPart).ProjectID = prjId;                 mgr.SaveChanges(wp);             }         }   This Shows you how I was able to set metadata on the document library. It has to be added to the RootFolder of the document library, Unfortunately, the SPList does not have a Property bag that I can add a key\value pair to. It has to be done on the root folder. Now everything in the integration will reference projects by ID's and will not care about names. My, "DocLibExists" will now need to be changed because a web service is not set up to look at property bags.  I had to write another method on the Service to do the equivalent but with ID's instead of names.  The second thing you will notice about the code is the use of the Webpartmanager. I have seen several examples online, and also read a lot about memory leaks, The above code does not produce memory leaks. The web part manager creates an SPWeb, so just dispose it like I did. CONCLUSION This is a long long post so I will stop here for now, I will continue with more comparisons and limitations in my next post. My conclusion for this example is that Web Services will do the trick if you can suffer through CAML and if you are doing some simple operations. For Everything else, there's WCF! **** fireI apologize for the disorganization of this post, I was on a bus on a 12 hour trip to IOWA while I wrote it, I was half asleep and half awake, hopefully it makes enough sense to someone.

    Read the article

  • DDD/NHibernate Use of Aggregate root and impact on web design - ex. Editing children of aggregate ro

    - by pbrophy
    Hopefully, this fictitious example will illustrate my problem: Suppose you are writing a system which tracks complaints for a software product, as well as many other attributes about the product. In this case the SoftwareProduct is our aggregate root and Complaints are entities that only can exist as a child of the product. In other words, if the software product is removed from the system, so shall the complaints. In the system, there is a dashboard like web page which displays many different aspects of a single SoftwareProduct. One section in the dashboard, displays a list of Complaints in a grid like fashion, showing only some very high level information for each complaint. When an admin type user chooses one of these complaints, they are directed to an edit screen which allows them to edit the detail of a single Complaint. The question is: what is the best way for the edit screen to retrieve the single Complaint, so that it can be displayed for editing purposes? Keep in mind we have already established the SoftwareProduct as an aggregate root, therefore direct access to a Complaint should not be allowed. Also, the system is using NHibernate, so eager loading is an option, but my understanding is that even if a single Complaint is eager loaded via the SoftwareProduct, as soon as the Complaints collection is accessed the rest of the collection is loaded. So, how do you get the single Complaint through the SoftwareProduct without incurring the overhead of loading the entire Complaints collection?

    Read the article

  • Can MYSQL filter by date if date is stored as text? ex "02/10/1984"

    - by Roeland
    Hello! I am trying to modify an app for a client which has already a database of over 1000 items. The dates are stored as text in the database with the format "02/10/1984". The system allows you to add and remove fields to the catalog dynamically and it also allows the advanced search to have specific fields be allowed. The problem is that it wasn't designed with dates in mind, so when I set a field as a date, and try to search by a range the query is trying to do a AND (cfv0.value = 01/02/2004 AND cfv0.value <= 05/03/2008) . I can make it so the date range passed is a numeric time value. Is there a way that when sending the query, it takes the text fields (with the date) and converts it to numeric time value so at that point I am basically just comparing numbers which would work fine. I do not have the option to change all the current date to numeric value due to the way the dynamic fields are set up. Thanks guys!

    Read the article

  • Grails or Play! for an ex-RoR developer ?

    - by Kedare
    Hello, I plan to begin learning a Java web framework (I love the Java API), I already used Rails and Django. I want something close to Java, but without all the complexity of J2EE. I've found 2 framework that could be good for me : Grails : Grails looks great, it use Groovy that is better than Java for web application (I think..), but it's slower, that use pure-java components (Hibernate, Strut, Spring), it looks pretty simple to deploy (send .war and it's ok !), the GSP is great ! It's a bit harder to debug (need to restart the server at each modification, and the stacktrace is a mix of Java and Groovy stack that is not always understandable..) Play! : This framework also looks great, it's faster than Grails (It's use directly Java), but I don't really like how it use Java, it modify the source code to transform the properties call as setXXX/getXXX, I'm not kind of that... The framework also have caching function that Grails don't (alreary) has. I don't really like the Template Engine. It's also easer to debug (no need to restart the server, and the stacktrace is clear) What do you recommend for ? I am looking for something easy to learn (I used a lot ruby and java, but a little bit java (But I love the Java API)), that is full featured (That's no a problem with all the Java Library availables, but if it's bundle and integrated I prefer), that scale and that is not too slow (faster than ruby), and if possible I would want something with a decent community to easily find support and answer to my questions ;) PS: No JRuby on Rails Thank you !

    Read the article

  • problem with crawl many url in .net: Server IP not ping. maybe bandwidth or http connection limit ex

    - by Hamid
    Hi to all I develop web crawling service (windows service / multi-thread) . its work fine, but sometimes my server network not response. and i can't ping server IP (from internet), but can ping by other network card (local ip) that not access to internet. after i open server with remote desktop and stop crawling service. i could ping. What's my problem? Bandwidth limit or max connection limit exceed or ??? how to prevent this issue? Note: when this problem occur, i open browser for browse web site, but can't open any website!!! Could you please help me. Thanks in advanced

    Read the article

  • How to create a "Shell IDList Array" to support drag-and-drop of virtual files from C# to Windows Ex

    - by JustABill
    I started trying to implement drag-and-drop of virtual files (from a C# 4/WPF app) with this codeplex tutorial. After spending some time trying to figure out a DV_E_FORMATETC error, I figured out I need to support the "Shell IDList Array" data format. But there seems to be next to zero documentation on what this format actually does. After some searching, I found this page on advanced data transfer which said that a Shell IDList Array was a pointer to a CIDA structure. This CIDA structure then contains the number of PIDLs, and a list of offsets to them. So what the hell is a PIDL? After some more searching, this page sort of implies it's a pointer to an ITEMIDLIST, which itself contains a single member that is a list of SHITEMIDs. My next idea was to try dragging a file from another application with virtual files. I just got a MemoryStream back for this format. At least I know what class to provide for the thing, but that doesn't help at all for explaining what to put in it. So now that that's explained, I still have no idea how to create one of these things so that it's valid. There's two real questions here: What is a valid "abID" member for a SHITEMID? These virtual files only exist with my program; will the thing they are dragged to pass the "abID" back later when it executes GetData? Do they have to be system-unique? Why are there two levels of lists; a list of PIDLs and each PIDL has a list of SHITEMIDs? I'm assuming one of them is one for each file, but what's the other one for? Multiple IDs for the same file? Any help or even links that explain what I should be doing would be greatly appreciated.

    Read the article

  • How to synchronize cuda threads when they are in the same loop and we need to synchronize them to ex

    - by Vickey
    Hi all, I have written a code and Now I want to implement this on cuda GPU but I'm new to synchronization so please help me with this, It's little urgent to me. Below I'm presenting the code and I want to that LOOP1 to be executed by all threads (heance I want to this portion to take advantage of cuda and the remaining portion (the portion other from the LOOP1) is to be executed by only a single thread. do{ point_set = master_Q[(*num_mas) - 1].q; List* temp = point_set; List* pa = point_set; if(master_Q[num_mas[0] - 1].max) max_level = (int) (ceilf(il2 * log(master_Q[num_mas[0] - 1].max))); *num_mas = (*num_mas) - 1; while(point_set){ List* insert_ele = temp; while(temp){ insert_ele = temp; if((insert_ele->dist[insert_ele->dist_index-1] <= pow(2, max_level-1)) || (top_level == max_level)){ if(point_set == temp){ point_set = temp->next; pa = temp->next; } else{ pa->next = temp->next; } temp = NULL; List* new_point_set = point_set; float maximum_dist = 0; if(parent->p_index != insert_ele->point_index){ List* tmp = new_point_set; float *b = &(data[(insert_ele->point_index)*point_len]); **LOOP 1:** while(tmp){ float *c = &(data[(tmp->point_index)*point_len]); float sum = 0.; for(int j = 0; j < point_len; j+=2){ float d1 = b[j] - c[j]; float d2 = b[j+1] - c[j+1]; d1 *= d1; d2 *= d2; sum = sum + d1 + d2; } tmp->dist[tmp->dist_index] = sqrt(sum); if(maximum_dist < tmp->dist[tmp->dist_index]) maximum_dist = tmp->dist[tmp->dist_index]; tmp->dist_index = tmp->dist_index+1; tmp = tmp->next; } max_distance = maximum_dist; } while(new_point_set || insert_ele){ List* far, *par, *tmp, *tmp_new; far = NULL; tmp = new_point_set; tmp_new = NULL; float level_dist = pow(2, max_level-1); float maxdist = 0, maxp = 0; while(tmp){ if(tmp->dist[(tmp->dist_index)-1] > level_dist){ if(maxdist < tmp->dist[tmp->dist_index-1]) maxdist = tmp->dist[tmp->dist_index-1]; if(tmp == new_point_set){ new_point_set = tmp->next; par = tmp->next; } else{ par->next = tmp->next; } if(far == NULL){ far = tmp; tmp_new = far; } else{ tmp_new->next = tmp; tmp_new = tmp; } if(parent->p_index != insert_ele->point_index) tmp->dist_index = tmp->dist_index - 1; tmp = tmp->next; tmp_new->next = NULL; } else{ par = tmp; if(maxp < tmp->dist[(tmp->dist_index)-1]) maxp = tmp->dist[(tmp->dist_index)-1]; tmp = tmp->next; } } if(0 == maxp){ tmp = new_point_set; aloc_mem[*tree_index].p_index = insert_ele->point_index; aloc_mem[*tree_index].no_child = 0; aloc_mem[*tree_index].level = max_level--; parent->children_index[parent->no_child++] = *tree_index; parent = &(aloc_mem[*tree_index]); tree_index[0] = tree_index[0]+1; while(tmp){ aloc_mem[*tree_index].p_index = tmp->point_index; aloc_mem[(*tree_index)].no_child = 0; aloc_mem[(*tree_index)].level = master_Q[(*cur_count_Q)-1].level; parent->children_index[parent->no_child] = *tree_index; parent->no_child = parent->no_child + 1; (*tree_index)++; tmp = tmp->next; } cur_count_Q[0] = cur_count_Q[0]-1; new_point_set = NULL; } master_Q[*num_mas].q = far; master_Q[*num_mas].parent = parent; master_Q[*num_mas].valid = true; master_Q[*num_mas].max = maxdist; master_Q[*num_mas].level = max_level; num_mas[0] = num_mas[0]+1; if(0 != maxp){ aloc_mem[*tree_index].p_index = insert_ele->point_index; aloc_mem[*tree_index].no_child = 0; aloc_mem[*tree_index].level = max_level; parent->children_index[parent->no_child++] = *tree_index; parent = &(aloc_mem[*tree_index]); tree_index[0] = tree_index[0]+1; if(maxp){ int new_level = ((int) (ceilf(il2 * log(maxp)))) +1; if (new_level < (max_level-1)) max_level = new_level; else max_level--; } else max_level--; } if( 0 == maxp ) insert_ele = NULL; } } else{ if(NULL == temp->next){ master_Q[*num_mas].q = point_set; master_Q[*num_mas].parent = parent; master_Q[*num_mas].valid = true; master_Q[*num_mas].level = max_level; num_mas[0] = num_mas[0]+1; } pa = temp; temp = temp->next; } } if((*num_mas) > 1){ List *temp2 = master_Q[(*num_mas)-1].q; while(temp2){ List* temp3 = master_Q[(*num_mas)-2].q; master_Q[(*num_mas)-2].q = temp2; if((master_Q[(*num_mas)-1].parent)->p_index != (master_Q[(*num_mas)-2].parent)->p_index){ temp2->dist_index = temp2->dist_index - 1; } temp2 = temp2->next; master_Q[(*num_mas)-2].q->next = temp3; } num_mas[0] = num_mas[0]-1; } point_set = master_Q[(*num_mas)-1].q; temp = point_set; pa = point_set; parent = master_Q[(*num_mas)-1].parent; max_level = master_Q[(*num_mas)-1].level; if(master_Q[(*num_mas)-1].max) if( max_level > ((int) (ceilf(il2 * log(master_Q[(*num_mas)-1].max)))) +1) max_level = ((int) (ceilf(il2 * log(master_Q[(*num_mas)-1].max)))) +1; num_mas[0] = num_mas[0]-1; } }while(*num_mas > 0);

    Read the article

  • Couchbase (ex. membase) solution to dump all keys in a bucket

    - by j99
    I was googling around and found various python + tap solutions that should enable me to dump all keys from a bucket but none of them worked for me. I have a bucket at port 11230 and I need to get a dump of all keys in order to fill them into sphinx search engine. If I execute: # python /opt/couchbase/lib/python/tap_example.py 127.0.0.1:11230 I get the following output: info: New bin connection from None error: uncaptured python exception, closing channel <tap.TapConnection connected at 0x7f5d287184d0> (<type 'exceptions.AssertionError'>: [/usr/lib/python2.6/asyncore.py|read|78] [/usr/lib/python2.6/asyncore.py|handle_read_event|428] [/opt/couchbase/lib/python/mc_bin_server.py|handle_read|325]) this error is the same even if I try some other host or port. I also tried many other python scripts that I found on forums and groups but all of them produced the same error. My primary development environment includes PHP & Perl on Debian linux box but I will take any solution that would just dump all the keys into plain text file. Thank you for any help!

    Read the article

  • [ASP.NET] How can I HTML-encode a string and use human-readable encoded tags (ex: &ecirc; instead of

    - by Beerdude26
    Greetings, I'm looking for a way to encode a string into HTML that uses human-readable tags such as &ecirc; (=ê). At the moment, I am using the HttpUtility.HtmlEncode() function, but it appears to return numbered tags instead of human-readable ones. For example: Dim str as string = HttpUtility;HtmlEncode("vente - en-tête") 'Expected: vente - en-t&ecirc;te 'Actually received: vente - en-t&#234;te Is there a setting or function in ASP.Net to encode a string into HTML resembling the first comment? EDIT: I am looking for this kind of functionality because the text is saved HTML-encoded in the database. The text comes from a bunch of MS Word documents that have been converted to HTML.

    Read the article

  • Parsing csv line to Java objects

    - by Noobling
    I was wondering if someone here could help me, I can't find a solution for my problem and I have tried everything. What I am trying to do is read and parse lines in a csv file into java objects and I have succeeded in doing that but after it reads all the lines it should insert the lines into the database but it only inserts the 1st line the entire time and I don't no why. When I do a print it shows that it is reading all the lines and placing them in the objects but as soon as I do the insert it wants to insert only the 1st line. Please see my code below: public boolean lineReader(File file){ BufferedReader br = null; String line= ""; String splitBy = ","; storeList = new ArrayList<StoreFile>(); try { br = new BufferedReader(new FileReader(file)); while((line = br.readLine())!=null){ line = line.replace('|', ','); //split on pipe ( | ) String[] array = line.split(splitBy, 14); //Add values from csv to store object //Add values from csv to storeF objects StoreFile StoreF = new StoreFile(); if (array[0].equals("H") || array[0].equals("T")) { return false; } else { StoreF.setRetailID(array[1].replaceAll("/", "")); StoreF.setChain(array[2].replaceAll("/","")); StoreF.setStoreID(array[3].replaceAll("/", "")); StoreF.setStoreName(array[4].replaceAll("/", "")); StoreF.setAddress1(array[5].replaceAll("/", "")); StoreF.setAddress2(array[6].replaceAll("/", "")); StoreF.setAddress3(array[7].replaceAll("/", "")); StoreF.setProvince(array[8].replaceAll("/", "")); StoreF.setAddress4(array[9].replaceAll("/", "")); StoreF.setCountry(array[10].replaceAll("/", "")); StoreF.setCurrency(array[11].replaceAll("/", "")); StoreF.setAddress5(array[12].replaceAll("/", "")); StoreF.setTelNo(array[13].replaceAll("/", "")); //Add stores to list storeList.add(StoreF); } } //print list stores in file printStoreList(storeList); executeStoredPro(storeList); } catch (Exception ex) { nmtbatchservice.NMTBatchService2.LOG.error("An exception accoured: " + ex.getMessage(), ex); //copy to error folder //email } return false; } public void printStoreList(List<StoreFile> storeListToPrint) { for(int i = 0; i <storeListToPrint.size();i++){ System.out.println( storeListToPrint.get(i).getRetailID() + storeListToPrint.get(i).getChain() + storeListToPrint.get(i).getStoreID() + storeListToPrint.get(i).getStoreName() + storeListToPrint.get(i).getAddress1() + storeListToPrint.get(i).getAddress2() + storeListToPrint.get(i).getAddress3() + storeListToPrint.get(i).getProvince() + storeListToPrint.get(i).getAddress4() + storeListToPrint.get(i).getCountry() + storeListToPrint.get(i).getCurrency() + storeListToPrint.get(i).getAddress5() + storeListToPrint.get(i).getTelNo()); } } public void unzip(String source, String destination) { try { ZipFile zipFile = new ZipFile(source); zipFile.extractAll(destination); deleteStoreFile(source); } catch (ZipException ex) { nmtbatchservice.NMTBatchService2.LOG.error("Error unzipping file : " + ex.getMessage(), ex); } } public void deleteStoreFile(String directory) { try { File file = new File(directory); file.delete(); } catch (Exception ex) { nmtbatchservice.NMTBatchService2.LOG.error("An exception accoured when trying to delete file " + directory + " : " + ex.getMessage(), ex); } } public void executeStoredPro(List<StoreFile> storeListToInsert) { Connection con = null; CallableStatement st = null; try { String connectionURL = MSSQLConnectionURL; Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver").newInstance(); con = DriverManager.getConnection(connectionURL, MSSQLUsername, MSSQLPassword); for(int i = 0; i <storeListToInsert.size();i++){ st = con.prepareCall( "IF EXISTS (SELECT * FROM tblPay@RetailStores WHERE StoreID = " + storeListToInsert.get(i).getStoreID() + " AND RetailID = "+ storeListToInsert.get(i).getRetailID() + ")" + " UPDATE tblPay@RetailStores " + " SET RetailID = '" + storeListToInsert.get(i).getRetailID() + "'," + " StoreID = '" + storeListToInsert.get(i).getStoreID() + "'," + " StoreName = '" + storeListToInsert.get(i).getStoreName() + "'," + " TestStore = 0," + " Address1 = '" + storeListToInsert.get(i).getAddress1() + "'," + " Address2 = '" + storeListToInsert.get(i).getAddress2() + "'," + " Address3 = '" + storeListToInsert.get(i).getAddress3() + "'," + " Address4 = '" + storeListToInsert.get(i).getAddress4() + "'," + " Address5 = '" + storeListToInsert.get(i).getAddress5() + "'," + " Province = '" + storeListToInsert.get(i).getProvince() + "'," + " TelNo = '" + storeListToInsert.get(i).getTelNo() + "'," + " Enabled = 1" + " ELSE " + " INSERT INTO tblPay@RetailStores ( [RetailID], [StoreID], [StoreName], [TestStore], [Address1], [Address2], [Address3], [Address4], [Address5], [Province], [TelNo] , [Enabled] ) " + " VALUES " + "('" + storeListToInsert.get(i).getRetailID() + "'," + "'" + storeListToInsert.get(i).getStoreID() + "'," + "'" + storeListToInsert.get(i).getStoreName() + "'," + "0," + "'" + storeListToInsert.get(i).getAddress1() + "'," + "'" + storeListToInsert.get(i).getAddress2() + "'," + "'" + storeListToInsert.get(i).getAddress3() + "'," + "'" + storeListToInsert.get(i).getAddress4() + "'," + "'" + storeListToInsert.get(i).getAddress5() + "'," + "'" + storeListToInsert.get(i).getProvince() + "'," + "'" + storeListToInsert.get(i).getTelNo() + "'," + "1)"); st.executeUpdate(); } con.close(); } catch (Exception ex) { nmtbatchservice.NMTBatchService2.LOG.error("Error executing Stored proc with error : " + ex.getMessage(), ex); nmtbatchservice.NMTBatchService2.mailingQueue.addToQueue(new Mail("[email protected]", "Service Email Error", "An error occurred during Store Import failed with error : " + ex.getMessage())); } } Any advise would be appreciated. Thanks

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >