Search Results

Search found 260 results on 11 pages for 'fglrx'.

Page 7/11 | < Previous Page | 3 4 5 6 7 8 9 10 11  | Next Page >

• Why doesn't Unity 3D work on my HD3000 integrated graphics?

  - by Zatsugami

  So I got my new laptop recently. HP Envy 15 with switchable graphics card. I'm using both windows and ubuntu, but for ubuntu I need just Intel HD3000 for better battery live. I've installed fglrx-updates and fglrx-amdcccle-updates. The drivers seems to work for my ATI card. The problem is, Intel HD3000 does not support Unity 3D. Why? My older Intel GMA 4500 did this. lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] (rev ff)

  Read the article

• Dual 7950, freezes during startup

  - by Hiro

  I have two identical video cards right now. Xubuntu will boot up no problem if I only have one card installed. If I install the 2nd card it will just hang midway thru the loading screen. Regardless of which card I use and which position on the motherboard, it will freeze if I have both installed. I've tried installing the proprietary drivers, both fglrx and fglrx-updates, still freezes in the same spot. Uninstalled those and went back to the default ones. The only way I can get a terminal is by booting into failsafe mode. Booting using 13.10 i386 on a USB stick gives me some errors related to what I think is the 2nd video card: [drm:r600_ring_test] ERROR radeon: ring 1 test failed (scratch(0x850C)=0xCAFEDEAD) [drm:r600_dma_ring_test] ERROR radeon: ring 3 test failed (0x02FFFF6B) radeon 0000:0200.2 disabling GPU acceleration"

  Read the article

• Cannot get ATI Drivers installed

  - by bittoast67

  I am trying to install the Catalyst driver. The best I can get is a strange resolution problem and firefox acts all wonkt. The worst I have gotten is low graphics mode in which I just reinstall Ubuntu. I have a HP Pavilion Dv7 laptop. With Radeon 3200 HD. I plan to try again with a fresh install of Ubuntu 12.4.3 as I have heard its the most compatible. This is what I have done: I have tried just the easy way of going to synaptic and installing the drivers that way. the fglrx package (not the fglrx update). And if memory serves I think that boots me into low graphics mode. So, fresh install of Ubuntu and tried again. I have done everything a couple times from this site (http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide) following every instruction to a T. That gets me something, such as a lowered fan speed and a much cooler computer, but I also lose most of my resolution. And displays says its the best resolution I can get. I also have a very screwy firefox. Using this method I can see AMD Catalyst Control Center in my dash (two of them really one administrator and one not) but when I try to open it it says no amd driver detected. So again, ubuntu reinstall. I have tried the GUI method from the Legacy driver I got from AMD's site. It runs through smoothly and at the very end after I exit the installer it gives me an error. I have also tried various other methods using terminal, as well as various different drivers (the one from the amd's site and the one suggested in the above link for my graphics card) both to no avail. When I try the method in the link on number 2, and I get the super low res and screwy fire fox. I type in, fglrxinfo ,and get a badrequest error. I have yet to type in fglrxinfo and get anything like what I am supposed to. UPDATE: I am now currently reinstalling Ubuntu 12.4. I tried the above mentioned link - thank you very much!- just to see on the previously failed driver attempt by following the purge commands. And to no avail when typing fglrxinfo I still get the badrequest thing. I will update again after a try with a true fresh install. Thanks again!! UPDATE: Alright everyone. Still no go. I have done everything word per word in the provided tutorial. I have rebooted my computer again to a fucked up resolution and this is what I get when typing fglrxinfo: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 153 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 I would like to add that when installing this file: fglrx_8.970-0ubuntu1_amd64.deb I got this: Building initial module for 3.8.0-29-generic Error! Bad return status for module build on kernel: 3.8.0-29-generic (x86_64) Consult /var/lib/dkms/fglrx/8.970/build/make.log for more information. update-initramfs: deferring update (trigger activated) Processing triggers for ureadahead ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-29-generic Processing triggers for libc-bin ... ldconfig deferred processing now taking place Any ideas? Anyone? I cant for the life of me figure out what I am doing wrong.

  Read the article

• Ubuntu 10.04 LTS - Dual monitor works only sometimes (ATI multi-desktop)

  - by Beres Botond

  I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine. But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either: Flicker a few times, but then work OK. Or (more often) Flicker once and then go back to "No video input" again. I usually end up rebooting a few times until it works. Does anyone have any idea for fixing it? This is my xorg.conf currently: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[6]-0" 0 0 Screen "amdcccle-Screen[6]-1" 1280 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1440x900" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[6]-0" Driver "fglrx" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "amdcccle-Device[6]-1" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:6:0:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-0" Device "amdcccle-Device[6]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-1" Device "amdcccle-Device[6]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Cant install AMD Catalyst Radeon 12.10 drivers on Ubuntu 12.10 [closed]

  - by Rey Mestidio

  Possible Duplicate: What is the correct way to install ATI Catalyst Video Drivers? I am trying to install the latest AMD Catalyst Radeon 12.10 drivers on Ubuntu 12.10. When I get to the ready to install screen I get an error message. This is the message from the install log file. I'm not sure what to do. Thanks very much for your help in advance! **Supported adapter detected. Check if system has the tools required for installation. fglrx installation requires that the system have kernel headers. /lib/modules/3.5.0-17-generic/build/include/linux/version.h cannot be found on this system. One or more tools required for installation cannot be found on the system. Install the required tools before installing the fglrx driver. Optionally, run the installer with --force option to install without the tools. Forcing install will disable AMD hardware acceleration and may make your system unstable. Not recommended.**

  Read the article

• Installazione ATI Mobility Radeon HD 5650 su Ubuntu 11.10

  - by Antonio

  Salve a tutti, possiedo un portatile HP Pavillion dv6 3110 con scheda video dedicata ATI Mobility Radeon HD 5650 da 1 Giga ed ho installato da poco Ubuntu 11.10 Versione 64 bit. Ho seguito molte guide su internet per installare i driver per la mia scheda video ma nessuna ha dato esito positivo. Nella finestra "driver aggiuntivi" sono riuscito ad installare i "Driver grafici fglrx proprietari ATI/AMD" ma dopo il riavvio non riesco ad utilizzare correttamente la scheda video. Mentre i "Driver grafici fglrx proprietari ATI/AMD (aggiornamenti post-release)" non me li fa proprio installare segnalando un errore che riporto di seguito "L'installazione di questo driver non è riuscita.Consultare i file di registro per maggiori informazioni: /var/log/jockey.log". Ho pensato allora di scaricare direttamente dal sito di AMD gli ultimi driver rilasciati attraverso il pacchetto "amd-driver-installer-12-3-x86.x86_64.run", l'ho lanciato, ho seguito il wizard di installazione, l'installazione viene completata, digito "sudo aticonfig --initial" per la configurazione iniziale, ma al riavvio del pc appaiono soltanto scritte su schermo nero con una serie di "OK" e qualche "FAIL". Ho provato questa procedura anche per le versioni precedenti dei driver, ma il risultato è sempre lo stesso. Sono disperato. Riuscirò mai ad utilizzare la mia scheda video? Vi incollo per completezza ciò che mi appare all'esecuzione del comando "lspci -nn | grep VGA" per visualizzare i processori grafici presenti sul mio pc: 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Madison [AMD Radeon HD 5000M Series] [1002:68c1] Grazie anticipatamente a coloro che potranno aiutarmi. Cordiali Saluti Antonio Giordano

  Read the article

• 12.04.1 no audio through HDMI

  - by JoJo

  having a bit of an issue with getting audio to go through HDMI. Here are the base specs: OS: Ubuntu Desktop 12.04.1 x64 CPU: AMD A10-5800K 3.8G 4M FM2 R Mobo: MSI FM2-A75MA-E35 OS: Ubuntu 12.04.1 LTS Vid Card: (integrated on CPU) AMD Radeon HD 7660D HDMI sound works fine under Win7 (after mobo and vid drivers are installed), so it's not physically broken. Audio through the normal headphone jacks works fine under Ubuntu. Looking at the audio panel, there is no HDMI output at all. aplay -l also reports only: card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 In additional drivers there are two versions: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) The first installs, but problem persists. I do get more resolutions to pick from. Second version does not, reporting it failed installation and to find details at: /var/log/jockey.log Looked at the log, and it's insanely long, if necessary I can get it to you guys. Did more research and some had luck by manually installing the drivers, so tried to give that a shot by following this: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6 starting at 3.1 Manually installing Catalyst 12.6. I immediately had 2 issues, (1) the AMD website does not provide any drivers for Linux, and (2) the following command did not work: sudo sh amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precise sh: 0: Can't open amd-driver-installer-12-6-x86.x86_64.run Some other posts stated to update "alsa-drivers", but that also did not work as install command for the new version of them did not work. I forget the exact issue, but similar to above, cannot open / cannot find. Any help would be greatly appreciated!

  Read the article

• ATI Radeon HD 6870 Driver fails to install default-policy.sh does not support version

  - by Rogue Coder

  I'm running Ubuntu 11.04 Beta, with everything updated completely. I'm using Ubuntu Classic, because Unity fails to run, supposedly because of my video card. The drivers for the Radeon HD 6870 series is apparently lacking, but I found a post stating the newest version has full support for Ubuntu Natty Narwhal. That post is slightly old, so i grabbed 11.3 for Ubuntu x86 off the ATI website. When I run the installation program, I receive the following error: > ./ati-driver-installer-11-3-x86.x86_64.run Created directory fglrx-install.uREFoO Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.831.2......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.38-8-generic-pae:; make sure that the version is being correctly set by --iscurrentdistro ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.38-8-generic-pae:; make sure that the version is being correctly set by --iscurrentdistro Removing temporary directory: fglrx-install.uREFoO > I would love to get the latest ATI drivers working so that I can try out Unity!

  Read the article

• How do I get my graphic card to work properly?

  - by Lucas

  I been having some problems with my graphic card for a time now. But I had enough when I did'nt get Oil Rush to work on my HP Pavilion g6. The system has suggested hardware drivers for me, but the first time I installed them they pretty much fucked up the graphics. After some time I managed to get the computere to work properly (I thought) again. When the game did'nt work I tried to the hardware drivers for the graphic card anyway. First of all there was to possible choices insted of one, as the last time I installed the drivers (when it did'nt work out so good). The choices are: ATI/AMDs proprietary video drivers FGLRX (update for edition) and Proprietary FGLRX-video drivers for ATI/AMD I realized the drivers probebly are pretty much the same, so I tried the first one. But this did'nt work. Instead I was asked to "Look in to /usr/var/log/jockey.log". This did'nt helped me much. Instead I choiced the other one, wich was installed and after reboot there where some changes. First of all there was a lot more details for Unity that was'nt there before and some shortkeys are now working that did'nt before (like Ctrl + T and the Prt Sc-button). But overall everything doesn't work as it used to. Like when you browse between the workspaces it doesn't look the same. To get to the point: it doesn't work well right now even if I got some things better and now will not Oil Rush (as I mentioned in the beginning) even start. SO! Can someone give me any advice with this? I'm stuck. Can't manage to see whats wrong right now. Any help? My graphic card is AMD Radeon HD 6470M.

  Read the article

• notification icons in Gnome Shell cause lag

  - by Relik

  Before marking this as a duplicate please read my question throughly. OK I am having a bit of a problem with Gnome Shell (3.3.90); Any time there are any icons in the bottom notification bar it causes massive lag when opening/closing and interacting with the Activities panel. If I close all applications that have a notification icon the lag goes away 100%. In My case it's drop box, but any program that requires a icon in the notification area will cause this issue to happen. I am using an AMD A6-3420M running Catalyst 11.11, however I can confirm that this is not a driver issue. I had the same issue on a system running a GeForce 8600GT,and a HD6850, and there is another question on here titled "Gnome Shell lags after a while" where the user is having the same exact issue and He is also using a nVidia card, a 9800GT to be specific. Please, this question has been asked several time and every time people say its a fglrx issue and close the question, or they mark the question as a duplicate and link to a question that says its an fglrx issue. This is not a driver issue, I understand that the AMD drivers caught heat for quite some time for Gnome Shell compatibility issues but those issues have been resolved. Aside from this issue Gnome Shell runs beautiful on my HD650, my A6-3420M, and my 8600GT. Having said that, does anyone know how to correct this issue? Closing Drop Box is not an option for me either.

  Read the article

• ATI Radeon 5800 series dual monitor unity not 3D accelerated

  - by Victor S

  When I had a single monitor setup, without Xinerama, with my current setup of Ubuntu 11.10, ATI 5800 series card, Unity showed transparencies, shadows, etc. (although graphics was reported as 'Standard' in the control/settings panel). Having switched to a dual monitor setup, dell 24" UltraSharp and a smaller Acer monitor, Unity shows only as 2d, even though I'm not loggin in to that display manager. WebGL performance is very sluggish, I'm getting the impression that the processor is doing all the work and the card isn't even accessible even though the drivers are installed (from the ubuntu repository, I did not compile custom drivers). Any tips on how to enable full 3D accelerationn and video card support. Here is my xorg.conf file: Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP4" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-0" Device "amdcccle-Device[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-1" Device "amdcccle-Device[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[1]-0" 0 0 Screen "amdcccle-Screen[1]-1" 1920 0 EndSection Section "Device" Identifier "amdcccle-Device[1]-0" Driver "fglrx" Option "Monitor-DFP4" "0-DFP4" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "amdcccle-Device[1]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:1:0:0" Screen 1 EndSection Section "ServerFlags" Option "Xinerama" "on" EndSection More info: fglrxinfo display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5800 Series OpenGL version string: 4.1.11005 Compatibility Profile Context

  Read the article

• ATI Radeon HD with Catalyst driver stuck mirroring screens

  - by Mike Axiak

  In 11.10 I replaced my aging Nvidia card with a new Radeon HD 6970 card. The single card has two DVI output ports which I've connected to two monitors. I installed Catalyst version 11.9 and I cannot get multiple monitors set up the way I want. I tried: $ sudo amdcccle and setting the mode to single desktop multiple monitors and whenever I do that Unity crashes and I get back to the login screen. Nothing shows up in the Xorg.*.log files for me to post here. There's only one card so I don't think xinerama would be any help here. Anyone have any ideas? EDIT: Here's my xorg.conf file: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "75" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "amdcccle-Device[5]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[5]-1" Device "amdcccle-Device[5]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Low Graphics and laggy screen after update to 13.10 from 13.04

  - by Wh0RU

  After updating from 13.04 to 13.10 many of 3D unity stuff has stopped working, I am suing Samsung Series 3 (NP350V5X) Laptop which has Switchable Intel and AMD Radeon HD 7670M GFX. xserver-xorg-video-ati does works but NO 3D support and graphics are very low. [I am currently using this] fglrx & fglrx-updates shows blank screen after Login. Intel Graphic Install doesn't work either (dependency error) Output of $ sudo lshw -c video *-display description: VGA compatible controller product: Thames [Radeon HD 7500M/7600M Series] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:45 memory:e0000000-efffffff memory:c0120000-c013ffff ioport:3000(size=256) memory:c0100000-c011ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:bfc00000-bfffffff memory:d0000000-dfffffff ioport:4000(size=64) Similarly $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits) OpenGL version string: 2.1 Mesa 9.2.1 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Shows no 3D support. Can anyone please guide how to make things working again.

  Read the article

• 13.10 Saucy login issues; black screen, loop, and freeze

  - by user135598

  Once upgraded to I 13.10 I was not able to get past the login screen. I had the black screen. Also; I can not log on with low graphics mode from recovery either. It makes no difference if I try default graphics driver or not. Then after running sudo install -f from recovery root prompt I got a login loop. I have purged fglrx, fglrx-legacy, and nvidia-current. I updated my repository with xorg-edgers and reinstalled nvidia-current. Now it semi-freezes at the login screen when I try to log on as my normal user. I say 'semi' because I can still use my mouse to click on the upper right hand Ubuntu logo and Shut Down or Restart the PC. I still cannot log on with my user name, but I can through the Guest login. While logged in as Guest I added a new user account with administrative privileges. I CAN log into this account without problem and from here am able to see that my .dmrc file in my original account reads: [Desktop] Session=XBMC I have changed 'Session=XBMC' to 'Session=ubuntu' and rebooted, but to no avail. The file resets itself and makes a backup of my changes. Any help would be greatly appreciated.

  Read the article

• Why won't my graphics work in Ubuntu 12.04 LTS?

  - by user170974

  I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

  Read the article

• External Full HD monitor and Virtual Desktop Size

  - by Stefan

  I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

  Read the article

• Wireless problems with Broadcom BCM4313 with windows7 (duplicate)

  - by user292394

  I have wireless connection problem can't connect my wireless adress lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no lsmod Module Size Used by bnep 19624 2 rfcomm 69160 8 ip6t_REJECT 12939 1 xt_hl 12521 6 ip6t_rt 13537 3 nf_conntrack_ipv6 18894 8 nf_defrag_ipv6 34768 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17717 10 xt_limit 12711 13 xt_tcpudp 12884 18 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 8 nf_defrag_ipv4 12758 1 nf_conntrack_ipv4 xt_conntrack 12760 16 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12770 0 nf_nat 21798 1 nf_nat_ftp nf_conntrack_ftp 18638 1 nf_nat_ftp nf_conntrack 96976 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 ip_tables 27239 1 iptable_filter vx_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT uvcvideo 80885 0 videobuf2_vmalloc 13216 1 uvcvideo videobuf2_memops 13362 1 videobuf2_vmalloc snd_hda_codec_hdmi 46207 1 videobuf2_core 40664 1 uvcvideo videodev 134688 2 uvcvideo,videobuf2_core snd_hda_codec_conexant 57441 1 snd_hda_intel 52355 8 snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 102099 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 dm_multipath 22873 0 snd_seq_midi_event 14899 1 snd_seq_midi scsi_dh 14882 1 dm_multipath lib80211_crypt_tkip 17619 0 snd_rawmidi 30144 1 snd_seq_midi intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451511 1 kvm_intel joydev 17381 0 serio_raw 13462 0 snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi intel_ips 18664 0 wl 4207846 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi btusb 32412 0 bluetooth 395423 22 bnep,btusb,rfcomm snd_timer 29482 2 snd_pcm,snd_seq snd 69238 26 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi lib80211 14381 2 wl,lib80211_crypt_tkip toshiba_bluetooth 12852 0 cfg80211 484040 1 wl lpc_ich 21080 0 fglrx 8085343 190 soundcore 12680 1 snd toshiba_acpi 22901 0 sparse_keymap 13948 1 toshiba_acpi wmi 19177 1 toshiba_acpi amd_iommu_v2 19054 1 fglrx video 19476 0 mei_me 18627 0 mei 82276 1 mei_me mac_hid 13205 0 parport_pc 32701 0 ppdev 17671 0 lp 17759 0 parport 42348 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 52570 0 hid 106148 2 hid_generic,usbhid psmouse 102222 0 ahci 25819 3 libahci 32168 1 ahci atl1c 46086 0 dm_mirror 22135 0 dm_region_hash 20862 1 dm_mirror dm_log 18411 2 dm_region_hash,dm_mirror Can someone give any ideas on how I can fix my wireless

  Read the article

• Ubuntu: Failure to login with multiple video adapters

  - by tsilb

  Forgive my ignorance, for I am a complete linux noob. I have a computer with three video cards and six monitors. Works great on Windows. Trying to get it to run Ubuntu as well. It loads fine when I have it configured to run on one adapter; detects both screens, runs ok. But I want to turn the other 4 monitors on and run the whole thing as one extended desktop (one session, etc). So I downloaded and installed the newest ATI driver for Linux, which seems to work, kinda. I ran this to set up the screens: aticonfig --adapter=all --initial -f Now when I boot, Ubuntu seems to turn on all the screens (3 viewports, each with two cloned displays from what I can tell). When I enter my login info OR move the mouse off the main screen, the screens freeze and the kbd/ms become unresponsive. aticonfig generated xorg.conf included below. Have tried the following: aticonfig -initial -f - works, but only detects the primary adapter and 2 screens aticccle - Tells me I have to reboot after enabling the other cards. Then goes into above described freezing state. aticonfig --adapter=all --initial -f - see above Manually editing xorg.conf file with my limited knowledge - Was able to get two adapters running, but only the second adapter initialized while the primary stopped at the Ubuntu boot screen. Was unable to see the login prompt. Froze after I logged in blindly (was able to hear the login sound). Using generic "radeon" driver instead of ATI Proprietary driver with the above init attempts Toggling xinerama Various combinations of the above Hardware: Intel Core 2 Quad q6600 8GB DDR2 (3x) ATI Radeon HD 4680 5 monitors (21W, 21W, 22W Portrait, 22W Portrait, 19")and an HDTV (26"W, HDMI) in a horizontal arrangement I know next to nothing about Linux/Ubuntu aside from basic filesystem navigation, editing text files, and accessing my local and networked Windows stores and shares. Basically this is the most advanced thing I've had to do. I installed today. Please advise how to make this configuration work. my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[2]-0" RightOf "aticonfig-Screen[1]-0" Option "RenderAccel" "true" Option "AllowGLXWithComposite" "true" EndSection Section "Files" EndSection Section "Module" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[2]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[2]-0" Driver "fglrx" BusID "PCI:4:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[2]-0" Device "aticonfig-Device[2]-0" Monitor "aticonfig-Monitor[2]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Waiting for required medium software center

  - by tavoe

  I'm trying to install the proprietary AMD drivers through Software Sources. I tick the box for fglrx-updates, and it says applying changes and fills 10% of a progress bar. It then sites there for hours (I left the computer unattended). Trying to get this process to finish, I found that the Ubuntu software center progress tab display a message reading: Applying Changes: Waiting for required medium What in the world does that mean and how can I get it to move on?

  Read the article

• Can't install Catalyst 12.8

  - by Dominic Jordan Hasford

  I can not install fglrx ATI drivers/Catalyst 12.8. I have tried installing AMA Catalyst 12.8 using this guide: http://www.upubuntu.com/2012/08/install-amd-catalyst-128-on-ubuntu.html When I reach the part of installing with sudo sh amd-driver-installer-8.982-x86.x86_64.run , I get the following error: When I run it using the --force option, I get this message: How can I fix these errors and install Catalyst 12.8?

  Read the article

• ATI Radeon HD 4650 AGP Video card not recognized properly

  - by PastorLarry

  I have an ASUS ATI Radeon HD 4650 AGP in this system (yeah, I know how old it is). I've been on Ubuntu since 10.04, and the system has never properly recognized the card. I have always had the VESA drivers installed. Now that I have the time to address the problem, 12.04 was listing the card as "Unknown" under the System Settings. Meanwhile, Sysinfo recognizes the card as: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 0028 So I know that this card should be using the radeon driver (or even the radeonhd driver). However, when I installed the mesa-utils package, the card is suddenly reported as: Gallium 0.4 on llvmpipe (LLVM 0x300) So now, I'm completely at a loss. It seems that the llvmpipe stuff has to do with OpenGL, but it still appears that I don't have the proper video driver installed. That being said, anyone know what I can do to force the system to recognize the card and use the radeon driver? [EDIT 05.28] I did look at some other information, including glxinfo and a couple of other commands (it was REALLY late, so I don't remember the other commands) and I got these: glxinfo | grep vendor: server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: X.org glxinfo | grep renderer: OpenGL renderer string: Gallium 0.4 on AMD RV730 One of the other commands gave a whole lot of info and near the end stated that the activation string for the radeon driver was "modprobe radeon". I've tried that from sudo and as root, but it doesn't seem to change anything. I'm at a complete loss. I've even added the xorg-edgers ppa to my Software Sources and updated and rebooted the system, but nothing has changed. Most of all, I can't seem to find any documentation on this issue, as it seems that it's assumed that the radeon driver will install automatically, no questions asked. I feel like such a newbie. Does anyone have any ideas on this? [edit 05.28] results of lsmod | grep radeon (in a more readable format than the comment below): radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon [edit 05.29] This is my /etc/X11/xorg.conf: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" So here is my question. Can I simply change the name of the driver in the device section to "radeon" instead of "fglrx" and have the radeon driver work? Or is ther a way to use this as a tmeplate and change the appropriate lines and activate the radeon driver through this file?

  Read the article

• Best Ati Radeon x1200 drivers for 12.10

  - by Jaclyn

  [Long story short is at the bottom if you don't care about my ranting] Ok, well, I have the unfortunate distinction of having an Acer Extensa 4420 (Yes, the model with the faulty motherboard, and no, I do not know how it is still working either). Long story short I need the best drivers for my Ati Radeon x1200 integrated graphics card. The Ati Propriatary drivers for 12.10 no longer supports my video card. Currently when I try to play Minecraft, or any game really, the framerate is quite terrible despite the fact that my handy dandy system load monitor says that I have plenty of memory and CPU power (Mind you, this is when I'm not playing minecraft; that kind of uses up all of my resources unless it's on the worst graphical settings, and even then I have terrible framerate, but plenty of resources left over). I tried the fglrx through a workaround guide, and it completely killed my display and I had to uninstall it. I'm considering just trying to install fglrx through synaptic, but I am hesitant to do so since I don't want a repeat of the BSBDD!!! (Black Screen of Bad Drivers 'o DOOOM!!!), so I will wait until after I get some input from you fine ladies and gentlemen on to what your advice it. ok, so I'm running xubuntu 12.10 64 bit. I upgraded from 10.10 to 11.04. Then about a month ago I went from natty to quantal via the update option in the package updater, and then I decided that I was sick of gnome so I installed xfce. I did not install new drivers from natty to when I wound up at 12.10, so that shouldn't have changed, and they were indeed quite terrible back then, but now I'm using xubuntu as my main os, so I actually need good drivers. uuuugh. Anyway, long story short: I need to know what are the best drivers available for my card, and how to install them, because I am a linux novice, and I have tried everything that I can think of, including search google. Small edit: I forgot to note that since I upgraded to 12.10, my VGA out does not work (I haven't had a chance to try the s-video yet), and possibly related, the USB port on that side of my laptop does not work anymore either.

  Read the article

• WebGL and Hardware acceleration problems [duplicate]

  - by Harry

  This question already has an answer here: How To Enable WebGL In Chrome On Ubuntu? 1 answer I am currently running Ubuntu 12.04 and in Windows 7 on my ATI Mobility Radeon 4300 series graphics card WebGL and hardware acceleration worked perfectly fine. Now on Ubuntu 12.04 I have tried both the open-source drivers and the FGLRX drivers and it no longer works. Could somebody please help? I use Google Chrome 18

  Read the article

• Problems to boot on Natty with Kernel 2.6.39.1

  - by Jorge Pinho

  I've installed this new Kernel version (2.6.39.1) and it seems to me that isn't stable. When i boot my laptop it blocks.... and it shows a Fail on Graphics... What is the problem? I've installed proprietary drivers FGLRX. My Laptop is a Acer Aspire 5542G AMD64 bits ATI Radeon HD4570 4gb Memory I'll wait for an answer, please... Here it is my proprietary graphics: This installation problem shows me this:

  Read the article

• Misaligned Display on Resume

  - by Shaun Killingbeck

  I have an odd issue with my laptop display when resuming from suspend. When I have an additional monitor connected there is no issue. However without an additional monitor connected, after resuming only the left 10% of the laptop screen (just enough to show the Unity Launcher and a bit more) is visibly working, although strangely in a screenshot this same 10% is shown on the right hand side of the screenshot: I ran xrandr --verbose before and after resume, and the only difference (using diff) was: 2c2 < LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm --- > LVDS connected 1366x768+1280+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm This seems to suggest the screen position has been shifted by 1280 horizontally, the width of the second monitor I use. Indeed, running the command xrandr --output LVDS --pos 0x0 does bring the screen back to normal. However, I don't want to have to run this command every time, I'd prefer to cure the source of the problem than just correct the symptoms. Any ideas on how to get Ubuntu to keep the display configuration settings from before suspend when it resumes? or why it changes at all? Heres some technical details that might be pertinent: HP Pavilion DV6 Laptop Ubuntu 13.04 AMD Radeon HD 6400M Series AMD Radeon HD 6520G Using proprietary flgrx-updates driver and amdcccle (Catalyst Control Center) (Unfortunately the open source driver causes my laptop to run even hotter than it already does, otherwise I'd use that) The contents of Xorg.conf: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1366x768" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1280x1024" EndSection Section "Device" Identifier "amdcccle-Device[0]-0" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:0:1:0" EndSection Section "Device" Identifier "amdcccle-Device[0]-1" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" BusID "PCI:0:1:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[0]-0" Device "amdcccle-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 2646 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[0]-1" Device "amdcccle-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11  | Next Page >