Search Results

Search found 6887 results on 276 pages for 'internal'.

Page 7/276 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• Ubuntu installer doesn't see internal hard drive on DELL Vostro 3360

  - by valk

  I just received a new DELL Vostro 3360, it has Windows 7 preinstalled. When it comes to the partition window I can't see the hard drive there. I see only /dev/sda or /dev/sdb (either one and in both cases it's a usb drive from which I'm installing). I tried every imaginable BIOS configuration. Tried to change the SATA mode to ATA, DHCI and more. EDIT: I tried to install with standard Ubuntu 12.04 32 bit, and 11.10 64 bit official versions. No luck. I'll appreciate any suggestion.

  Read the article

• Transfer page from internal to external

  - by Theo Gulland

  Afternoon all! Currently I have a website with a list of audio products (essentially a search engine for audio deals). http://www.soundplaza.co.uk Once you go to the details page, you can then press the 'view deal' button to go to providers site e.g. = http://www.soundplaza.co.uk/all-deals/113/bookshelf-speakers/acoustic-energy-1 This jump between two sites is a bit harsh and I would like to show a transition page, to simply ease them into another site and not scare them off. Within this tradition page I will have a simple loading gif and some graphics showing that your transferring. QUESTION: What is the best way to send the details (link, product name etc) to this transfer page, to then wait 5 seconds, to then move on to the desired link... this can in NO WAY damage my SEO, if anything rel="nofollow" would be great if possible. Currently I have seen that you can submit form to the transition page, then you can use php sleep and then php header to transfer... however I am not sure if php header will transfer SEO value tot he provider? Any opinions would be great! Thanks

  Read the article

• How i can fix " E: Internal Error, No file name for libc6 "

  - by SMAOUH

  Hello all please i need your help to fix this problem i have 2 broken packages system and i can't reinstall them or make any other option : update , upgrade , install & remove app .... Ubuntu 12.04.3 I have not found any solutions please help me sudo apt-get install -f smaouh@Linux:~$ sudo apt-get install -f [sudo] password for smaouh: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libopenal1 libpam-winbind libao-common gnome-exe-thumbnailer libqca2-plugin-ossl gir1.2-champlain-0.12 libmagickcore4 libmagickwand4 libmagickcore4-extra libcapi20-3 python-unidecode libopenal-data liblqr-1-0 gir1.2-gtkchamplain-0.12 unixodbc wine-gecko2.21 libchamplain-0.12-0 python-glade2 imagemagick-common libosmesa6 oss-compat gimp-help-common esound-common gimp-help-en libmpg123-0 ttf-mscorefonts-installer imagemagick winbind libodbc1 fonts-droid fonts-unfonts-core libchamplain-gtk-0.12-0 libclutter-gtk-1.0-0 gir1.2-gtkclutter-1.0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 386 not upgraded. 4 not fully installed or removed. After this operation, 0B of additional disk space will be used. dpkg: error processing libc6 (--configure): libc6:amd64 2.15-0ubuntu10.5 cannot be configured because libc6:i386 is in a different version (2.15-0ubuntu10.4) dpkg: dependency problems prevent configuration of libc-dev-bin: libc-dev-bin depends on libc6 (>> 2.15); however: Package libc6 is not configured yet. libc-dev-bin depends on libc6 (<< 2.16); however: Package libc6 is not configured yet. dpkg: error processing libc-dev-bin (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-dev: libc6-dev depends on libc6 (= 2.15-0ubuntu10.5); however: Package libc6 is not configured yet. libc6-dev depends on libc-dev-bin (= 2.15-0ubuntu10.5); however: Package libc-dev-bin is not configured yet. dpkg: error processing libc6-dev (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-i386: libc6-i386 depends on libc6 (= 2.15-0ubuntu10.5); however: Package libc6 is not configured yet. dpkg: error processing libc6-i386 (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already Errors were encountered while processing: libc6 libc-dev-bin libc6-dev libc6-i386 E: Sub-process /usr/bin/dpkg returned an error code (1) smaouh@Linux:~$

  Read the article

• multiple godaddy domains to home router then reverse proxy to multiple internal servers [closed]

  - by Dan

  I need someone to steer me correctly... advising on all required components. I have multiple domains with godaddy, say site1.com , site2.com, site3.net I have multiple home LAMP servers... one on say, lampsrv1 = 192.168.0.2:8080 (windows) and lampsrv2 = 192.168.0.3:9080 (linux srv2) I would like to have server1.site1.com point to lampsrv1 and server2.site1.com point to lampsrv2 . I may also want server1.site2.com also point to my lampsrv1 as an option. My thinking is - I have a dedicated linux srv1 with a reverse proxy server behind the router, ie Apache or NGINX or equivalent directing to appropriate LAMP server. It's the godaddy subdomains, cnames or redirections, etc I'm having a challenge with for starters... I have tested apache with virtual servers but can't get proxying to work based on host header info... seems to go to one address making me think its actually the apache reverse proxying that's not quite working. Finally to add to this, my router has a dynamic IP but does lease for quite a while but that would be my final piece. So, I'm sure this might be a popular question but can't seem to piece this together. I need someone who has actually configured this scenario to advise but will take other suggestions.... please indicate if you have successfully configured this.

  Read the article

• Internal hard drive, can't format

  - by user113923

  I cannot format anymore the hard drive of my laptop. Here is how I proceed: I am starting my computer with a USB live drive (Ubuntu 10.04 LTS - the Lucid Lynx). Then I start disk utility and try to format the hard drive - I choosed to format the Master boot record but I get the following error: Error creating partition table: helper exited with exit code 1: Error calling fsync(2) on /dev/sda: Input/output error If I try to delete partitions I get the following error Error erasing: helper exited with exit code 1: In part_del_partition: device_file=/dev/sda, offset=32256 Entering MS-DOS parser (offset=0, size=30005821440) MSDOS_MAGIC found looking at part 0 (offset 32256, size 4096157184, type 0x83) new part entry looking at part 1 (offset 10618836480, size 8414461440, type 0x83) new part entry looking at part 2 (offset 19033297920, size 1077511680, type 0x82) new part entry looking at part 3 (offset 20110809600, size 9895011840, type 0x07) new part entry Exiting MS-DOS parser MSDOS partition table detected got it got disk got partition - part-type=0 Error: Input/output error during write on /dev/sda ped_disk_commit_to_dev() failed If I try to install ubuntu frrom the usb on the hard drive and choose erase and use the entire disk I get the error message Input/output error during write on /dev/sda For side infos I have at the moment 4 partitions on my hard drive: /dev/sda1 (ext2) /dev/sda2 (ext2) /dev/sda3 (swap) /dev/sda1 (ntfs) + /dev/sda (unlocated Space) My ultimate goal is to reinstall ubuntu and have only 2 partitions... I would really appreciate any help here! Thanks JB

  Read the article

• Anonymous Types are Internal, C# 4.0 Dynamic Beware!

  - by HeartattacK

  This article explains why C# 4.0's dynamic features don't seem to work when evaluating instances of anonymous types returned from a public method of a different assembly. Read more...  Note: Crossposted from www.heartysoft.com  

  Read the article

• facebook internal search by google [migrated]

  - by Alexis

  I am currently working on a challenge; basically using google api; I would search for facebook fan pages; most specifically the "about" timeline for the email add and the date the business was founded. So far I have come to this: site:facebook.com/pages + "business type" + "country" + "@email.com" I need to add something else so that it can give me back the date it was founded in. If you see the facebook fan page in the about section; there is for e.g (Founded 06/02/2010) The bracketed info above is what I need to add to succeed in adding; any idea?

  Read the article

• Do search engines rank internal redirects negatively?

  - by siverd

  A client is in the late stages (code complete) of a website redesign and unfortunately hasn't implemented 301 redirects to point high traffic pages to the new URL's. As I understand it our only option at this point is to create redirects within the CMS. Our CMS allows us to do this: www.mysite.com/category/current-page.html will redirect to www.mysite.com/new-category-name/new-page.html The site now uses custom logic on our 404 page to check this list of redirects and if one exists forwards the user to the new-page.html I understand that using 301 redirects would be the correct way to maintain our page rank but I think that would require a code change which isn't possible. Question How will search engines respond to this? Will they wait until the redirect happens and allow us to keep our page rank (authority, trust, etc) or will they see the 404 page and down-rank us? Worst case...will they make our new-page.html start from a rank of "0"? Thanks for your help.

  Read the article

• How To Track "Similar Product/Page" Links In Internal Site

  - by Petra Barus

  So I just created a new widget that would show up in a product page in my site. This widget will show several products similar to the product that is displayed in the current page. The purpose is to help users compare similar products. Let's say in the product page A http://domain/products/A The Similar Products widget will show http://domain/products/B http://domain/products/C http://domain/products/D http://domain/products/E My question is how to track this "Product B page were visited X times from Product A page via Similar Product widget"? (And there is also chance that Product B will show up in the widget on Product C page) I have this idea using the Event feature from Google Analytics. But I'm still not sure if it is or what is the common best practice for this.

  Read the article

• 3 Tips to Improve the Search Rankings by Practicing Internal SEO

  For achieving the best ranking in the search engine result page, three tips have to be followed. For getting the best ranking, one should hire an SEO services provider firm to get the best services.

  Read the article

• SEO and internal links

  - by hanazair

  I'm fairly new to SEO and although I've read many articles on the topic I still don't have a clear idea of how to get my client's website get to the first page of Google Search. I run MOZ competitor analysis and see that a competitor that comes up at the top of Google Search has approximately same Domain Authority, Domain Moz Rank and Trust. They have 8 External Linking Root Domains while my client's site has five. Yet the competitor comes up as one of the top sites on the first page, and my client's side is on page #3. Then I noticed one drastic difference in competitor's ranking and that is Total Links. He has 1,388! I don't understand how this could be a positive factor in Search Engine ranking and how can they legitimately have 1,388 links (while only 14 of those are external). Another competitor who is #2 in search engine rankings has 773 links total with only 14 external links. It seems fishy, but yet there they are - at the top of the search engine results. Is that some current way to trick Search Engines? What to do if I'd like to get my client's website onto the first page by some legitimate means? Thanks.

  Read the article

• Ubuntu 12.04 still slow at mounting internal filesystem

  - by Matthew Goson

  I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

  Read the article

• Documents stored on separate internal drive, Ubuntu doesn't notice on startup

  - by PlanoAlto

  My machine has Windows 7 Ultimate x64 and Ubuntu 12.04 LTS running side-by-side on a single hard drive with GRUB bootloader, each with 500 GB storage. I keep my personal documents on a separate 1TB hard drive so they remain isolated from any changes I make to the OS drive, but when Ubuntu starts it does not seem to notice my documents drive. While I've installed and worked with Ubuntu 12.04 Server x32 before, using it as a desktop OS is new to me. I use my documents drive for all of my personal data, including wallpapers and music, so it is imperative that Ubuntu recognize it on startup. Concerning the two specific examples: Ubuntu loads with the default blue-colored desktop instead of my desired picture of the spectacular Carina galaxy. When I right-click the desktop and select "Change Desktop Background", it wakes up from its amnesia and loads the proper background. As for my music, Rhythmbox defaults to an empty library upon reboot, forcing me to reload the settings manually each time. This gets quite tedious because I certainly can't work to my full potential without my music. The second thing I would like to address is making Ubuntu point the documents directories in ~ to their appropriate counterparts on the 1TB documents drive. I realize that this question is not new, but when I create the symbolical links, they established themselves inside the directories and did not convert the directories themselves into symbolical links. I also prefer not to move the files themselves from their current location on the 1TB drive. I believe this would also help the Rhythmbox library problem as well considering it's a default directory for the music player. Excerpt from fstab: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb6 during installation UUID=057ac83e-76ad-460d-86e5-b6d46e9b1d80 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb7 during installation #UUID=1183df90-23fc-44e4-aa17-4e7c9865d5cb none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 That's enough content for one question. I really like the Ubuntu experience so far since it doesn't treat me like an idiot out of the box (can't say the same for Windows) so I can't wait to hear from the community! Thanks for your help in advance.

  Read the article

• News Applications internal working [on hold]

  - by Vijay

  How does news applications work other than RSS Feed based applications? I know some of them take the RSS content from the source site.But sometimes I see, those applications show - Title Description Date Image video etc. Even though when I see the original site's rss, image, video is not there in rss. So how does one get that to show in there applications? Some applications even shows feeds from magazine sites, newspaper sites. How do these applications work? I am creating an application which will link to different news sites feeds categorized (like top news, technology, games, articles etc.) On the front page it will show the website names, then on selection of any news site it will get the feed from that website and show it to user. So I would like to know All the fetching of data from should be done on user selection or data should be prefetched? Detailed information I want to fetch from the original like provided in the rss data. How should I go about it?

  Read the article

• Planning Your Website Content For a Powerful Internal Linking Structure

  Your website content is the key to getting your visitors to do something useful, like convincing them to buy one of your products, opt-in to your email list, or read another page on your website. One of the least useful actions a visitor can take on your site is to hit the back button and go back to what they were doing.

  Read the article

• "Sorry, Ubuntu 12.04 has experienced an internal error."

  - by malapradej

  I have recently upgraded to Precise and had some errors. It seems to be quite random and with differences in the error reports. I have duly sent the reports hoping the system will have found the problem and sorted itself out. After the second error I am following the wizards (software...) advice and seeking help. The 1st time it happened I jotted down the following: ExecutablePath /usr/lib/tracker/tracker-extract LaunchPad bug 950765 AMD64 The second time the following: ExecutablePath /usr/share/appart/appart-gpu-error-intel.py "Possible GPU hang........" sandybridge-m-gt2 LaunchPad bug 981261 If there is anyone that can help it is much appreciated. I did not really want to upgrade at this stage, but was forced to due to the latest version of python-numpy in precise. You win some, you loose some.... Jacques I am using a Pavilion dv6 notebook and 64bit ubuntu 12.04 LTS

  Read the article

• The Importance of Internal Links

  No website is ever complete without linking from within your own pages to your other pages, and not through your normal navigation, but from linking to your other pages from within paragraphs. Google and other major search engines like to see relevant links to your pages, and if you link from one of your pages to another of your pages, their algorithm is tuned to see this as highly relevant, especially if you use good anchor text to link to your other page.

  Read the article

• Internal Links - On Page SEO - How to Do it Right

  One of the main reasons we do on page SEO is to communicate with the search engines. If you think of the code on your website page as being a conversation with Google, you can instruct the search engine to do what you want when it comes to indexing your website.

  Read the article

• Protecting Server Security from Internal Threats

  Sure, hackers and network-based malware threatens your computing infrastructure, but server security faces a far more insidious threat.

  Read the article

• Protecting Server Security from Internal Threats

  Sure, hackers and network-based malware threatens your computing infrastructure, but server security faces a far more insidious threat.

  Read the article

• 500 Internal Server Error when setting up Apache on localhost

  - by Martin Hoe

  I downloaded and installed XAMPP, and to keep my projects nicely separated I want to create a VirtualHost for each one based on its future domain name. For example, in my first project (we'll say it's project.com) I've put this in my Apache configuration: NameVirtualHost 127.0.0.1 <VirtualHost 127.0.0.1:80> DocumentRoot C:/xampp/htdocs/ ServerName localhost ServerAdmin admin@localhost </VirtualHost> <VirtualHost 127.0.0.1:80> DocumentRoot C:/xampp/htdocs/sub/ ServerName sub.project.com ServerAdmin [email protected] </VirtualHost> <VirtualHost 127.0.0.1:80> DocumentRoot C:/xampp/htdocs/project/ ServerName project.com ServerAdmin [email protected] </VirtualHost> And this in my hosts file: # development 127.0.0.1 localhost 127.0.0.1 project.org 127.0.0.1 sub.project.org When I go to project.com in my browser, the project loads up successfully. Same if I go to sub.project.com. But, if I navigate to: http://project.com/register (one of my site pages) I get this error: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. The error log shows this: [Sun May 20 02:05:54 2012] [error] [client 127.0.0.1] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://project.com/ Sun May 20 02:05:54 2012] [error] [client 127.0.0.1] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://project.com/ Any idea what config items I got wrong or how to get this working? It happens on any page that's not in in the root directory of project.com. Thanks.

  Read the article

• Eclipse wont open Android Xml files

  - by mike

  I'm just starting with Android and everything seems to be working fine, but when I try to look at any XML file in eclipse, I get the following error. The only way I can see them is by "Opening With" - TextFile. org.eclipse.core.runtime.CoreException: Error opening the Android XML editor. Is the document an XML file? at com.android.ide.eclipse.adt.internal.editors.AndroidEditor.createTextEditor(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.AndroidEditor.createAndroidPages(Unknown Source) at com.android.ide.eclipse.adt.internal.editors.AndroidEditor.addPages(Unknown Source) at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138) at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:357) at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:662) at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:462) at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595) at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:286) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2857) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2762) at org.eclipse.ui.internal.WorkbenchPage.access$11(WorkbenchPage.java:2754) at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2705) at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2701) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2685) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2676) at org.eclipse.ui.ide.IDE.openEditor(IDE.java:651) at org.eclipse.ui.ide.IDE.openEditor(IDE.java:610) at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:361) at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:168) at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:229) at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:208) at org.eclipse.jdt.ui.actions.SelectionDispatchAction.dispatchRun(SelectionDispatchAction.java:274) at org.eclipse.jdt.ui.actions.SelectionDispatchAction.run(SelectionDispatchAction.java:250) at org.eclipse.jdt.internal.ui.packageview.PackageExplorerActionGroup.handleOpen(PackageExplorerActionGroup.java:373) at org.eclipse.jdt.internal.ui.packageview.PackageExplorerPart$4.open(PackageExplorerPart.java:526) at org.eclipse.ui.OpenAndLinkWithEditorHelper$InternalListener.open(OpenAndLinkWithEditorHelper.java:48) at org.eclipse.jface.viewers.StructuredViewer$2.run(StructuredViewer.java:842) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.core.runtime.Platform.run(Platform.java:888) at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48) at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175) at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:840) at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:1101) at org.eclipse.jface.viewers.StructuredViewer$6.handleOpen(StructuredViewer.java:1205) at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:264) at org.eclipse.jface.util.OpenStrategy.access$2(OpenStrategy.java:258) at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:298) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3880) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3473) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

  Read the article

• Puppet nodes cant' find master, ec2 public versus internal ip addresses and hosts files

  - by Blankman

  If I setup my hosts files such that they reference all other ec2 nodes using the internal ip addresses, will this work or do I have to use the external ip addresses? Do I need to specify anything in my security group to get internal ip addresses to work? e.g. /etc/hosts ip-10-11-12-13.internal some_node_name If I do this, can I reference some_node_name anywhere in my scripts where I would have used the ip address previously? On my puppet agent servers, I have a reference to my puppet master like: public-ip-here puppet When I reboot my puppet agent's, syslog shows they couldn't find the master with the message: getaddinfo : name or service not known I did get it to work by updating /etc/default/puppet and I added to the options: --server=public-ip-here From what I read, puppet will by default try using 'puppet', and I set this in my hosts file so why wouldn't it be picking this up?

  Read the article

• Unable to access internal network through PfSense WAN port

  - by Sean

  Our branch office is unable to connect to our internal network for some reason. However we can connect to the branch office domain controller from behind PfSense. The following is our setup: |Branch DC - 192.168.0.101 | |Branch Firewall - 192.168.0.2 | |(Internet) | |Local Firewall - 192.168.3.1 | |PFSense WAN port - 192.168.3.100 |PFSense LAN port - 192.168.1.1 | | DC1 - 192.168.1.2|DC2 - 192.168.1.4 Branch DC can ping and connect to PFSense WebGUI on the WAN port successfully (we set this up using the PfSense documentation). DC1 and DC2 can connect outbound to the Branch DC. There seems to be a rule that prevents internal access on the WAN port. However our rules are set to allow all traffic on the LAN and WAN ports. It would be ideal to just disable the firewall altogether since we already have a firewall but when we do this, PfSense doesn't allow any internal traffic at all. I look forward to any assistance and thank you ahead of time.

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >