Search Results

Search found 502 results on 21 pages for 'jay bush'.

Page 7/21 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • Is "DSLAM congestion" a legitimate reason for slow DSL?

    - by Jay Bazuzi
    My DSL has been extremely slow in the evenings recently. To test it, I telnet to my DSL Modem, and ping the gateway. This way I eliminate internet congestion and local network issues. In the mornings I get 30ms - 50ms pings. In the evenings, it bounces around a lot, but 10000ms pings are common. I complained to Qwest support, and they said it was a known issue on their end, their engineers were working on it, and wouldn't say anything else. A couple days later I complained again, and they sent out a technician. He tested my house wiring and found that one of them had a short. It was an unused line, so we disconnected it, and he said things looked better and left. My daytime speeds improved at this point, but evening is still bad. I complained to Qwest support again, and they said it was a problem with DSLAM congestion at their end, and that they were working on it, but no ETA. My neighbor has Qwest DSL and doesn't seem to have these problems. That seems strange. I go use her network when I absolutely must get online and mine is behaving badly. I can't tell if they're yanking my chain or not. Regardless, these speeds are crap. I'm paying for 7Mpbs but am lucky if I get 1/10th that in the evenings. My kids like to watch Netflix streaming movies, and it's just impossible after 5pm or so. Should I wait it out? Will complaining again produce any results? Should I change my subscription to a lower speed until they fix their end? Or switch to cable?

    Read the article

  • Can't log in after restoring from Time Machine

    - by Jay Conrod
    My friend uses a Macbook Pro with Snow Leopard 10.6.2. She uses both FileVault and Time Machine to preserve her data. Recently, she suffered a hard disk failure. After restoring from Time Machine using the Snow Leopard install disk, she gets the following error when logging in: You are unable to log in to the FileVault user account at this time. Logging into the account failed because an error occurred. When examining the file system through Terminal, I noticed her home directory is not present: there is no /Users/username directory, or the FileVault .sparsebundle file that's supposed to be there. When using Time Machine.app on /Users, it appears as if her home directory as never there. Additionally, I did a search on the backup disk with the following command: sudo find /Volumes/backup -name '*.sparsebundle' No results. She told me that after working with some large data files, Time Machine would come on, and it would sound like it was transferring a lot of data to the hard disk. Time Machine must have been doing something, right? How can we recover her files? Are they still there?

    Read the article

  • Named ports in windows!

    - by Jay
    I wonder how stuff like this works in windows (xp and other that have telnet): Start-> Run -> cmd -> telnet <xyz.com> http Start-> Run -> cmd -> telnet <xyz.com> pop3 Start-> Run -> cmd -> telnet <xyz.com> smtp Are these "named" ports? Only windows knows that it has to substitute port numbers coz these are standard ports? Is there way I could create such a named port on windows? I would like something like this : telnet <xyz.com> oracle to translate to telnet <xyz.com> 1521

    Read the article

  • Where to set permissions to all server for logon trigger on sql server 2005

    - by Jay
    I need to keep track of the last login time for each user in our SQL Server 2005 database. I created a trigger like this: CREATE TRIGGER LogonTimeStamp ON ALL SERVER FOR LOGON AS BEGIN IF EXISTS (SELECT * FROM miscdb..user_last_login WHERE user_id = SYSTEM_USER) UPDATE miscdb..user_last_login SET last_login = GETDATE() WHERE user_id = SYSTEM_USER ELSE INSERT INTO miscdb..user_last_login (user_id,last_login) VALUES (SYSTEM_USER,GETDATE()) END; go This trigger works for servers that are system admins but it won't allow regular users to login. I have granted public select,insert and update to the table but that doesn't seem to be the issue. Is there a way to set permissions on the trigger? Is there something else I am missing? Thanks

    Read the article

  • Proper procedure - sftp access to www folder - To be able to upload files

    - by Jay
    My www folder is root:root. What should it be? My site works perfectly but maybe I am doing something wrong. My nginx.conf says user is 'nginx'. Should I be changing the www onwership and group to that or something else? Mainly I want to be able to sftp into the www folder using FileZilla. Preferably only allow access to the www folder. I want to be able to upload the website files but I just don't know the proper procedure. I have tried changing owners and groups but I get worried some part of the stack will not like it. For example does nginx play along, and php? I thought about having a sftp group or even an sftp user. But I don't want to go down a path that should be avoided. What should I be doing with my setup?

    Read the article

  • Need clear steps on how to convert a Windows 2000 Server to a XenServer VM

    - by Jay
    The source system is not local. The target host running XenServer is not local. The source system is running Windows 2000 Server SP4 and has 1 disk split into 6 partitions, all NTFS: C: 6 GB (boot) D: 15 GB E: 6 GB F: 6 GB G: 5 GB H: 26 GB Most of the partitions are mostly mostly full ( 60%). What is the most straightforward way to do a P2V migration of the server? I can do minor database & data syncs after the P2V is successful & running as a VM within XenServer, it's just getting to that point which is not clear. The option of installing a Windows 2000 Server from scratch is not available, I need to convert the existing physical server as-is into a VM to be hosted within a XenServer environment. I've looked at XenConvert but it maxes out on converting only 4 partitions in one shot, and I'm not certain how to account for the 2 extra partitions. I'm not familiar with XenServer but it's my only option right now to go P2V.

    Read the article

  • Can't Install msysgit/tortoisegit

    - by Jay
    I ran msysGit-netinstall-1.7.0.2-preview20100407-2.exe.   (http://code.google.com/p/msysgit/downloads/list) Then I ran TortoiseGit-1.4.4.0-64bit.msi.   (http://code.google.com/p/tortoisegit/downloads/list) msysgit was installed in C:\ TortioseGit appears to have been installed in C:\Program Files\TortoiseGit I have: "Git Clone..." "Git Create repository here" "TortoiseGit" in Explorer context menu. When I try to clone, I get "git have not installed" [sic]. I have tried setting the MSysGit path, in the TortioseGit settings, to everything imaginable. Nothing works. Neither C:\Program Files or C:\Program Files (x86) have a Git folder. The git command gives "command not found" from both cmd.exe and bash (that msysgit installed) I don't not see msysgit in - Control Panel - Programs - Program Features, but I do see TortioseGit in there. I would like a procedure for verifying that msysgit is properly installed. A procedure for uninstalling msysgit would be an added bonus. I would like a procedure for getting TortoiseGit to work. I am running Windows 7 on a MacBook Pro.

    Read the article

  • Pictures clicked on Start Menu's Recent Items list opens in non default program

    - by jay
    I am using Picasa Photo Viewer and have associated all JPG and PNG files to open with it. However when I open an image from the Recent Items list in the Windows 7 Start Menu it opens with Windows Photo Viewer. The context menu for such items reveals no actions that would make it go to Windows Photo Viewer, and the default (one in bold) opens with the Picasa viewer as you'd expect. It's just that the left click behaves differently for some reason. Any ideas on how to fix this?

    Read the article

  • Bash Script to Back Up Backs Up Itself

    - by Jay LaCroix
    I have the following bash script that creates a tar.gz of my filesystem on a Kubuntu PC. The problem is, that it also tries to backup the tar.gz backup file, even though I am storing the backup in /tmp and omitting /tmp from the backup. I am wondering why it's backing up the file in /tmp even though I told it not to. #!/bin/bash # init DATE=$(date +20%y%m%d) sudo tar -cvpzf /tmp/`hostname`_$DATE.tar.gz \ --exclude=/proc \ --exclude=/lost+found \ --exclude=/sys \ --exclude=/mnt \ --exclude=/media \ --exclude=/dev \ --exclude=/tmp \ --exclude=/home/jlacroix/Desktop \ --exclude=/home/jlacroix/Documents \ --exclude=/home/jlacroix/Music \ --exclude=/home/jlacroix/Pictures \ --exclude=/home/jlacroix/Projects \ --exclude=/home/jlacroix/Roms \ --exclude=/home/jlacroix/Videos \ --exclude=/home/jlacroix/.VirtualBox\ VMs \ --exclude=/home/jlacroix/.SpiderOak \ / scp /tmp/`hostname`_$DATE.tar.gz jlacroix@Pluto:/share/Recovery/Snapshots sudo rm /tmp/`hostname`_$DATE.tar.gz

    Read the article

  • Medion Akoya E5211 won't boot up or go into BIOS

    - by jay
    My Medion Akoya kept getting a blue screen and shutting down. Now when I try and restart the laptop, I just get a blank screen with a flashing _ in the top left corner. It doesnt beep when turned on – only if I press buttons. It doesn't give me the option to start BIOS or set up. I have tried pressing F8, F12, F2 and F3 but still nothing happens. It just goes to the the black screen with the flashing _ It is running Windows Visa Home Basic.

    Read the article

  • Pros/cons to turning off cable modem

    - by Jay
    A little off the wall perhaps, but ... I have a cable modem and a router for a wireless home network. Is it a good or a bad idea to turn it off at night and during the day when we're all at work or school? Or should I leave it on 24/7. I was thinking that leaving it on constantly makes me more vulnerable to hackers, not to mention wasting electricity. (Though I'd guess the amount of electricity used by a cable modem and a router is probably pretty trivial. Still, every little bit helps.) When I have turned it off and turned it on again, it takes several minutes for it to go through its little dialog with the cable company and get me connected to the Internet again, which is annoying but not a big deal. Anyone know any good reasons one way or the other?

    Read the article

  • AWS SSL Load Balancer

    - by Jay Francis
    OK, I am looking for some pointers. Basically I have a white-label app/site that will allow users to setup their own domain to use for their customer front-end. We have 2 dedicated servers and a load balancer. The problem is SSL, we were thinking about using AWS ELB to handle the SSL loadbalancing, but cant seem to figure out if it will properly handle it, it seems to be setup to work with EC2 instances, but we are using externally hosted servers via a loadbalancer. A blog post by AWS looks similar to what we need but it only seems to work with EC2 instances. http://aws.typepad.com/aws/2011/08/elastic-load-balancer-ssl-support-options.html Anyone had experience setting ELS SSL load balancers up to work with external servers?

    Read the article

  • Why is my global security group being filtered out of my logon token?

    - by Jay Michaud
    While investigating the effects of filtered tokens on my file permissions, I noticed that one of my global security groups is being filtered in addition to the regular system-defined filtered groups. My Active Directory environment is a single-domain forest on the Windows Server 2003 functional level. I'll call the domain "mydomain.example.com". I am logged onto a Windows Server 2008 Enterprise Edition machine (not a domain controller) as a member of the "MYDOMAIN\Domain Admins" group and the "MYDOMAIN\MySecurityGroup" global security group (among others). When I run "whoami /groups" from an elevated command prompt, I see the full list of groups to which my account belongs as expected. When I run "whoami /groups" from a regular, non-elevated command prompt, I see the same list of groups, but the following groups are described as "Group used for deny only". BUILTIN\Administrators MYDOMAIN\Schema Admins MYDOMAIN\Offer Remote Assistance Helpers MYDOMAIN\MySecurityGroup Numbers 1 through 3 above are expected based on Microsoft documentation; number 4 is not. The "MYDOMAIN\MySecurityGroup" global security group is a group that I created. It contains three non-built-in global security groups, and these security groups contain only non-built-in user accounts. (That is, I created all of the accounts and groups that are members of the "MYDOMAIN\MySecurityGroup" global security group.) There are other, similar groups of which my account is a member that are not being filtered out of my logon token, and this group is not granted any specific user rights in the security settings of this computer or in Group Policy. What would cause this one group to be filtered out of my logon token?

    Read the article

  • how to fix asyncmac.sys infection

    - by Jay
    AVG anti-virus tells me that there is a virus in my asyncmac.sys. I tried to overwrite it with a copy of asyncmac.sys from another computer (making sure that it was the same version of Windows XP, but I was still nervous that I was going to break something), but when I reboot, I get the same virus warning. If I try to delete the file Windows (or somebody) automatically and immediately puts it back. I get a blue-screen death if I try to boot in safe mode. I tried to do a system restore to before I had the virus, but it tells me that it can't restore because nothing has changed. Any suggestions on how to fix this?

    Read the article

  • Installing Gitolite on NAS - FATAL: have errors but logging failed

    - by Jay
    I'm trying to install Gitolite on my Synology DiskStation, following these instructions: http://www.bluevariant.com/2012/05/comprehensive-guide-git-gitolite-synology-diskstation/ Under "Install Gitolite on the DiskStation and Run Setup" When I run the gitolite install command: DiskStation> /volume1/homes/git/gitolite/install -ln /bin I get the following error: FATAL: have errors but logging failed! 2012-05-31.00:10:22 no GL_LOGFILE env var 2012-05-31.00:10:22 die could not symlink /volume1/home/git/gitolite/src/gitolite to /bin<<newline>> at /volume1/home/git/gitolite/install line 71<<newline>> I am very new to all of this. Does anyone know what this means, and how I can fix this error? Thank you very much.

    Read the article

  • Renaming Z drive in DOSBox

    - by Jay Kominek
    DOSBox makes a virtual drive, which it names Z:, for storing utility stuff on. Clearly they're trying to stay out of your way, so you can do whatever you want with the C: drive. Swell, I understand that. But I've got some old database accessing software I really, really want to run which assumes it lives on the Z drive. So I need to get DOSBox's Z called anything else. (C would be fine with me.) I've seen mentions that it is possible, but no actual indication of how to do it. Anything that gets the job done is appreciated.

    Read the article

  • send outgoing email via postfix from mail client

    - by Ey Jay
    I have installed postfix on my ubuntu that is hosted on digitalocean. What I want to do is. With my smtp server setup, I want to use it to send mail from my email client. I don't need to receive, I just need to send. I can telnet example.com 25 successfully, I received the email in my inbox, but when I tried using in a email client. smtp: example.com:25 user: smtp1user password: smtp1userpassword I get an error that says "Server doesn't respond. Try changing the port." I dont know how to proceed.

    Read the article

  • Why is my connection slow?

    - by Jay R.
    I have a Dell Precision T5400 with a Broadcom 1Gb onboard NIC. For some strange reason, when I access machines on our local network, the best I can get is around 125KB/s download speed. My laptop that has a 10/100Mb NIC onboard usually gets around 300KB/s or better from the same network resource. Both machines are plugged into the same 1Gb switch which connects to our local network wall jack at 100Mb half duplex. There is also a printer plugged into the same switch at 100Mb full. The resource I'm using for the test is a 30MB zip file copied from a jetty webserver that is running as part of a cruisecontrol installation. The cruisecontrol installation is running WindowsXP with full real-time antivirus and Altiris patch management and inventory running. That stuff on its own is eating some of the download speed. I've seen the laptop reach into the multiple MB/s download speed before, but the desktop never seems to get past 125KB/s to 130KB/s. In WindowsXP, before I upgraded the driver in the desktop, it was that slow. In Fedora, it is still slow even though it appears to be using the same driver version as the upgraded Windows driver. The upgraded Windows driver is faster, but still not nearly as fast as the laptop. What gives? Any insight to improve the situation would be appreciated. Could it be that the BroadCom board just isn't that good, or the driver in linux is just not as good as the Windows one?

    Read the article

  • Arch linux ati graphics crash after grub install

    - by Jay
    Ok, so I've had an arch linux w/ gnome 3 installed for a while now. And a while ago I installed ubuntu as another partition, I think to fix an issue that cause arch to fail. So, it was all working fine, but then I went and reinstalled grub 1 on the arch partition; Ubuntu had overwritten it on the install. Then when I tried to boot into arch it booted, but the graphics wasn't working correctly: gdm wouldn't even show, and there were weird colors instead. So, I uninstalled xf86-video-ati and then installed xf86-video-vesa. That made gdm run in fallback mode and I was able to boot to gnome 3 fallback mode (or whatever it's called). But I can't seem to get the graphics working correctly.

    Read the article

  • Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

    - by Jay Michaud
    I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

    Read the article

  • Using excel, how can I count the number of cells in a column containing the text "true" or "false"?

    - by Jay Elston
    I have a spreadsheet that has a column of cells where each cell contains a single word. I would like to count the occurrences of some words. I can use the COUNTIF function for most words, but if the word is "true" or "false", I get 0. A B 1 apples 2 2 true 0 3 false 0 4 oranges 1 5 apples In the above spreadsheet table, I have these formulas in cells B1, B2, B3 and B4: =COUNTIF(A1:A5,"apples") =COUNTIF(A1:A5,"true") =COUNTIF(A1:A5,"false") =COUNTIF(A1:A5,"oranges) As you can see, I can count apples, but not true or false. I have also tried this: =COUNTIF(A1:A5,TRUE) But that does not work either. Note -- I am using Excel 2007.

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >