Search Results

Search found 167 results on 7 pages for 'mailserver'.

Page 7/7 | < Previous Page | 3 4 5 6 7 

• postfix email gateway

  - by k-h

  I am setting up a postfix email gateway. It will not hold any mail but will accept email for my domain and forward it to another internal mailserver and relay mail out from the internal server. One of the main problems is that I am working on a live running system and this will be an upgrade so I am using a test domain which I will change at some point to the real domain. I tried various methods but found the simplest way (that worked) was to use a script to create an aliases file (from ldap entries). There are various problems with this method. The main one being that the entries can't be of the simple form [email protected] because the gateway doesn't know where to send them. They have to be of the form: [email protected]. What I would like doesn't seem hard but I can't get my head around the postfix documentation. There seem to be various ways but none of them seem to work. Most of the examples I have found on the web assume the mail is going to end up on the server. I want a list of users somewhere, preferably of the form: user1, user2, etc rather than [email protected] (I can easily generate this list) and I would like postfix to forward all email to example.com to a particular server: ie realmailserver.example.com. Can anyone suggest clues as to how I might do this?

  Read the article

• Why did I loose access to the mailboxes on my old web/mail host after changing to a new one but keeping old MX values

  - by LaserBeak

  So I changed the NS records with registrar to point at the new webhosts DNS servers and edited the SOA record there, deleting the new hosts default MX records and instead putting in the old ones for the old web\mail hosts. The website A record is however pointing at the new webhosts servers and the site comes up fine. But none of this should cause me to loose access to mailboxes on my old hosts mail server right? I log into the control panel on the old host, all the mailboxes are there, all the passwords are fine but I can't log in using either webmail or pop3, says incorrect log-in/password. I even created a new mailbox and password for it respectively, but it would not let me log in. For what its worth I did not change\delete the records for 'A' on the old webhost zone file, since I am not hosting the site with them anymore and NS records are pointing to other hosts DNS servers/zone file so that shouldn't matter right? The old hosts mailserver is also not simply down, I can tell because through the control panel I setup a mail forward for one of the existing inboxes and when sending mail to it, it receives it and forwards it fine. So from this I can deduce that I have correctly inputted the old hosts MX records into the zone file hosted on the new hosts DNS and the mail is being sent to the old hosts mail server(s) and is successfully forwarded by it. But why can't I log into those account/inboxes anymore ?

  Read the article

• Downloading attachments from Exchange with WebDAV

  - by arturito

  Hi there! I've been trying to retrive attachment from message in Exchange server using WebDAV.I don't know which version of Exchange the company is running. I'can successfully read messages and retrive list of attachments. However I am failing to save attachments. In both cases errors is: "The remote server returned an error: <403 Forbidden. Any idea what I'm doing wrong? My code: static void Main(string[] args) { HttpWebRequest Request; WebResponse Response; CredentialCache MyCredentialCache; string attachment = "http://mailserver/Exchange/Username/Inbox/Test.EML/Test.txt"; string strUserName = "username"; string strPassword = "password"; string strDomain = "domain"; try { // HttpWebRequest MyCredentialCache = new System.Net.CredentialCache(); MyCredentialCache.Add(new System.Uri(attachment), "NTLM", new NetworkCredential(strUserName, strPassword, strDomain)); Request = (HttpWebRequest)HttpWebRequest.Create(attachment); Request.Credentials = MyCredentialCache; Request.Method = "GET"; Response = (HttpWebResponse)Request.GetResponse(); } catch(Exception ex) { Console.WriteLine(ex.Message.ToString()); } try { //Web Client string downloadPath = "D:\\Downloads"; WebClient wcClient = new WebClient(); wcClient.Credentials = new NetworkCredential(strUserName, strPassword, strDomain); string file = Path.GetFileName(attachment); string filename = Path.Combine(downloadPath, file); wcClient.DownloadFile(attachment, filename); } catch (Exception ex) { Console.WriteLine(ex.Message.ToString()); } Console.ReadLine(); }

  Read the article

• Php script running as scheduled task hangs - help!

  - by Ali

  Hi guys, I've built a php script that runs from the command line. It opens a connection into a pop3 email account and downloads all the emails and writes them to a database, and deletes them once downloaded. I have this script being called from the commandline by a bat file. in turn I have created a scheduled task which invokes the bat file every 5 minutes. The thing is that I have set the time out to zero for the fact that at times there could be emails with large attachments and the script actually downloads the attachments and stores them as raw files offline and the no timeout is so that the script doesnt die out during downloading. I've found that the program hangs sometimes and its a bit annoying at that - it always hangs are one point i.e. when negotiating the connection and getting connected to the mail server. And because the timeout is set to zero it seems to stay stuck up in taht position. And because of that the task is not run as its technically hung up. I want that the program should not timeout when downloading emails - however at the points where it is negotiating a connection or trying to connect to the mailserver there should be a timeout only at that point itself and not the rest of the program execution. How do I do this :(

  Read the article

• Mail function wont send eMail. ERROR

  - by Peter

  I think i tried to fix this issue fr 3 days now and cant seem to find the problem. I use XAMPP and use this code: <?php $to = "[email protected]"; $subject = "Test mail"; $message = "Hello! This is a simple email message."; $from = "[email protected]"; $headers = "From: $from"; $res= mail($to,$subject,$message,$headers); echo " $res Mail Sent."; ?> when i enter that page i get an error that says: Warning: mail() [function.mail]: Failed to connect to mailserver at "localhost" port 25, verify your "SMTP" and "smtp_port" setting in php.ini or use ini_set( My php.init file in xampp are as follow: [mail function] ; For Win32 only. ; http://php.net/smtp SMTP = smpt.gmail.com ; http://php.net/smtp-port smtp_port = 25 That is all my codes.

  Read the article

• How can I filter then modify e-mails using IMAP?

  - by swolff1978

  I have asked this question in a different post here on SO: How can a read receipt be suppressed? I have been doing some research of my own to try and solve this problem and accessing the e-mail account via IMAP seems like it is going to be a good solution. I have successfully been able to access my own Inbox and mark messages as read with no issue. I have been asked to preform the same task on an Inbox that contains over 23,000 emails. I would like to run the test on a small amount of e-mails from that inbox before letting the whole 23,000 get it. Here is the code I have been running via telnet: . LOGIN [email protected] password . SELECT Inbox . STORE 1:* flags \Seen 'this line marks all the e-mails as read So my question is how can i execute that store command on a specific group of e-mails... say emails that are going to / coming from a specific account? Is there a way to like concatenate the commands? like a FETCH then the STORE? Or is there a better way to go about getting a collection of e-mails based on certain criteria and then modifying ONLY those e-mails that can be accomplished through IMAP?

  Read the article

• using own mail server with external domain and dns. Now have internal dns. dkim test not working

  - by mojotaker

  I am not very knowledgeable in this area, but have been able to make great head way. Now i am stuck I setup my own mail server, e.g mailbox.example.com. I had the domain dns point to my mail server in my office. i was able to set up everything working fine. such as dkim and spf records. Recently i decided to setup an internal dns server in the office so as to resolve some addresses for some development servers internally. Ok the problem now is my mail server is sitting on the internal dns server (the mail server is on the same box as the dns server) its still able to send and receive emails but not sure if dkim is working properly. when i try to do a dkim test "amavisd test keys" i get "invalid (public key: not available)" and i know that that means i have a dns issue. so what should i do? I am currently looking at my internal dns zonefile and i dont know what to do (i am using bind dns server on an ubuntu-server box). do i configure a dkim txt record on the local dns ? or is there a way to forward dkim "request" to the external dns ? or do i have this whole thing done wrong ? To be clear Basically my internal domain name is the same as my external domain name (i.e example.com) i have a mail server within my internal domain mailbox.example.com, that uses my external domain dns (external dns has been setup to point to my emailserver (which of course is now sitting behind my internal dns)) dkim (i dont think its working because it fails the dkim test") Need help in determing the proper setup What is the proper way to set this up ? thank you Update: Here is my local dns zone file ; ; BIND data file for local loopback interface ; $TTL 604800 @ IN SOA webserver.example.com. root.example.com. ( //dns and webserver on the same box 2012030809 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS webserver.example.com. @ IN A 192.168.1.117 @ IN AAAA ::1 ns IN A 192.168.1.117 www IN A xx.xx.xx.xxx // ip of external domain box (bluehost) work around to let local clients access website newsletter IN A xx.xx.xxx.117 // external ip address of local network mailbox.example.com. IN A 192.168.1.111 // internal ip of mailbox (mailserver webserver.example.com. IN A 192.168.1.117 //internal ip of a webserver

  Read the article

• DNSBL listed at zen.spamhaus.org - cant get outgoing mail working? Am I interpreting the response correctly?

  - by Joe Hopfgartner

  I have problem with a mailserver and there is something I kind of not understand! I can connect, authenticate, specify the sender address - but when specifying the reciever i get a error 550 which looks like so: RCPT TO:[email protected] 550-DNSBL listed at zen.spamhaus.org 550 http://www.spamhaus.org/query/bl?ip=62.178.15.161 Now the strange thing is that 62.178.15.161 is my local client address. Not the servers ip address. Also the error code 550 seems to be defined as so: 550 Requested action not taken: mailbox unavailable To me that makes totally no sense. Why this error code with this spamhaus message? Why the local ip adress and not the servers? There is exim running and there is nothing turning up in the logs mail.err mail.info mail.log mail.warn in /var/log I looked up both the servers and the clients ip adress on blacklists. The clients ip adress is listed on some (as expected), but the server is totally clean. Here is the complete telnet log when I reproduced the error. Mail clients like Evolution and Thunderbird give me the same spamhaus error message. joe@joe-desktop:~$ telnet mail.hunsynth.org 25 Trying 193.164.132.42... Connected to mail.hunsynth.org. Escape character is '^]'. 220 hunsynth.org ESMTP Exim 4.69 Sat, 01 Jan 2011 17:52:45 +0100 HELP 214-Commands supported: 214 AUTH STARTTLS HELO EHLO MAIL RCPT DATA NOOP QUIT RSET HELP EHLO AUTH 250-hunsynth.org Hello chello062178015161.6.11.univie.teleweb.at [62.178.15.161] 250-SIZE 52428800 250-PIPELINING 250-AUTH PLAIN LOGIN CRAM-MD5 250-STARTTLS 250 HELP AUTH LOGIN 334 VXNlcm5hbWU6 dGVzdEBodW5zeW50aC5vcmc= 334 UGFzc3dvcmQ6 ***** 235 Authentication succeeded MAIL FROM:[email protected] 250 OK RCPT TO:[email protected] 550-DNSBL listed at zen.spamhaus.org 550 http://www.spamhaus.org/query/bl?ip=62.178.15.161 quit 221 hunsynth.org closing connection Connection closed by foreign host. joe@joe-desktop:~$ Update: I tried the same thing from my other server and could successfully send an email. So it really looks like the server does check the IP wich establiches the connection is in some blacklist. This is theoretically a good thing - but - the authentication on the server should prevent that? Or shouldn't it? Well I just think it would be absurd if I couldn't send email over my smtp server from my dynamic ISP connection because the dynamic is listed, altough i have a clean server with login?

  Read the article

• Our VPS is being used as a Warez mule

  - by Mikuso

  The company I work for runs a series of ecommerce stores on a VPS. It's a WAMP stack, 50gb storage. We use an archaic piece of ecommerce software which operates almost entirely client-side. When an order is taken, it writes it to disk and then we schedule a task to download the orders once every 10 minutes. A few days ago, we ran out of disk space, which caused orders to fail to be written. I quickly hopped on to delete some old logs from the mailserver and freed up a couple of GB pretty quickly, but I wondered how we could fill up 50gb will nothing much more than logs. Turns out, we didn't. Hidden deep within the c:\System Volume Information directory, we have a stack of pirated videos, which seem to have appeared (looking at the timestamps) over the past three weeks. Porn, American Sports, Australian cooking shows. A very odd collection. Doesn't look like an individual's personal tastes - more like the VPS is being used as a mule. We have a 5-attempts and you're blocked policy on our FTP server (plus, there is no FTP account with access to that directory), and the windows user account has had it's password changed recently. The main avenues are sealed - and logs can verify that. I thought I'd watch and see if it happened again, and yes, another cooking show has appeared this morning. I am the only one to know of this problem at my company, and only one of two with access to the VPS (the other being my boss, but no - it's not him). So how is this happening? Is there a vulnerability in some of the software on the VPS? Are the VPS owners peddling warez across our rented space? (can they do this?) I don't want to delete the warez in case it is seen as a hostile action against this outside force, and they choose to retaliate. What should I do? How do I troubleshoot this? Has this happened to anyone else before?

  Read the article

• Postfix / Dovecot and Email Retrieval

  - by Eric J.

  I have setup Postfix and Dovecot on an Ubuntu box following the instructions http://www.exratione.com/2012/05/a-mailserver-on-ubuntu-1204-postfix-dovecot-mysql/ I can see that email is being delivered to and accepted by the server, but the email is not available for retrieval via POP3. What could be missing in my configuraton? It seems that email is not being properly handed off to Dovecot. Here are what I believe are the relevant /var/log/mail.log entries for an attempt to send email from another domain (hosted by Gmail) to the domain I have setup: Logged during SMTP connection postfix/smtpd[14689]: connect from mail-vb0-f50.google.com[209.85.212.50] postfix/smtpd[14689]: Anonymous TLS connection established from mail-vb0-f50.google.com[209.85.212.50]: TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits) postfix/smtpd[14689]: 5782740ACF: client=mail-vb0-f50.google.com[209.85.212.50] postfix/cleanup[14696]: 5782740ACF: message-id=<CAEjmKcjHnTY4yk=3QXoNrD76=04g-s9utPguTFB02Fx53GMPmw@mail.gmail.com> postfix/qmgr[14687]: 5782740ACF: from=<[email protected]>, size=1947, nrcpt=1 (queue active) postfix/smtpd[14702]: connect from mail.destinationdomain.com[127.0.0.1] postfix/smtpd[14702]: 2940A41AA9: client=mail.destinationdomain.com[127.0.0.1] postfix/cleanup[14696]: 2940A41AA9: message-id=<CAEjmKcjHnTY4yk=3QXoNrD76=04g-s9utPguTFB02Fx53GMPmw@mail.gmail.com> postfix/qmgr[14687]: 2940A41AA9: from=<[email protected]>, size=2450, nrcpt=1 (queue active) amavis[21309]: (21309-02) Passed CLEAN, [209.85.212.50] <[email protected]> -> <[email protected]>, Message-ID: <CAEjmKcjHnTY4yk=3QXoNrD76=04g-s9utPguTFB02Fx53GMPmw@mail.gmail.com>, mail_id: W52ZB8FAAA+8, Hits: -0.101, size: 1946, queued_as: 2940A41AA9, [email protected], 784 ms postfix/smtpd[14702]: disconnect from mail.destinationdomain.com[127.0.0.1] postfix/smtp[14698]: 5782740ACF: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=1.1, delays=0.29/0.01/0/0.79, dsn=2.0.0, status=sent (250 2.0.0 from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 2940A41AA9) postfix/qmgr[14687]: 5782740ACF: removed dovecot: lda([email protected]): msgid=<CAEjmKcjHnTY4yk=3QXoNrD76=04g-s9utPguTFB02Fx53GMPmw@mail.gmail.com>: saved mail to INBOX postfix/pipe[14703]: 2940A41AA9: to=<[email protected]>, relay=dovecot, delay=0.08, delays=0.02/0.02/0/0.04, dsn=2.0.0, status=sent (delivered via dovecot service) postfix/qmgr[14687]: 2940A41AA9: removed Logged during POP3 retrieval attempts dovecot: pop3-login: Login: user=<[email protected]>, method=PLAIN, rip=209.85.220.135, lip=10.195.83.10, mpid=14706 dovecot: pop3([email protected]): Disconnected: Logged out top=0/0, retr=1/2557, del=1/1, size=2540 postfix/smtpd[14689]: disconnect from mail-vb0-f50.google.com[209.85.212.50] dovecot: pop3-login: Login: user=<[email protected]>, method=PLAIN, rip=209.85.212.31, lip=10.195.83.10, mpid=14708 dovecot: pop3([email protected]): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0

  Read the article

• Set up Gmail with Google apps for own domain

  - by erdomester

  I rent a server from a German company. I have remote access to it as well as WHM and CPanel. I decided to use Google's mail servers for obvious reasons. I am not an admin just an average guy trying to set up what needs to be set up. The problem is I am unable to make the necessary settings. I watched Youtube tutorials, followed written ones as well as Google's help, but there is (at least) one serious problem with my domain settings. The domain console alwasy says Your MX records are incorrect When I check dappwall.com in mxtoolbox.com it says Pref Hostname IP Address TTL 10 mail.dappwall.com 46.4.88.247 24 hrs But this is not the host name. I checked WHM and my hostname is server1.dappwall.com. I can confirm it by typing the hostname command in putty. However, if I do an mx lookup at mxtoolbox.com on server1.dappwall.com or mail.dappwall.com I get Lookup failed after 1 name servers timed out or responded non-authoritatively I ran checks on the google apps toolbox on dappwall.com and two problems emerged: 1.No Google mail exchangers found. Relayhost configuration? 10 mail.dappwall.com In Google Apps > Settings for Gmail > Advanced settings it also says that my current MX records for dappwall.com is Priority Points to 10 MAIL.DAPPWALL.COM. So mail.dappwall.com again. I also have access to a robot provided by the company I rent the server from. Here I see this mail at two places but how should I (if it's necessary) modify this? I set Email routing to Automatically Detect Configuration. 2.There SHOULD be a valid SPF record. "v=spf1 include:_spf.google.com ~all" In the DNS Zone Editor I added this spf record: Name TTL Class Type Record dappwall.com. 1440 IN TXT v=spf1 include:_spf.google.com ~all In the cPanel Email Authentication page it says SPF: Status: Enabled Warning: cPanel is unable to verify that this server is an authoritative nameserver for dappwall.com. [?] Your current raw SPF record is : v=spf1 include:_spf.google.com ~all How can I confirm that my server is an authoritative nameserver for dappwall.com? In WHM Service Configuration Mailserver selection Dovecot was set but I disabled it (i don't know if that's ok). What am I missing here? Where is that mail.dappwall.com coming from?

  Read the article

• ASA5505 Novice. Setting up Outside/Inside/and DMZ as Guest Network

  - by GriffJ

  I need a little help in developing a config for our ASA5505. I'm an MCSA/MCITPAS but I don't have a lot of practical cisco experience. Here is what I need help with, we currently have a PIX as our boarder gateway and well it's antiquated and it only has a 50 user license which means I'm constantly clearing local-host throughout the day as people complain. I discovered that the last IT person bought at couple ASA5505s and they've been sitting in the back of a cupboard. So far I've duplicated the configuration from the pix to the asa but as I was going to be going this far I thought I'd go further and remove another old cisco router that was used only for the guest network, I know the asa can do both jobs. So I'm going to paste a scenario I wrote up with the actual IPs changed to protect the innocent. ... Outside Network: 1.2.3.10 255.255.255.248 (we have a /29) Inside Network: 10.10.36.0 255.255.252.0 DMZ Network: 192.168.15.0 255.255.255.0 Outside Network on e0/0 DMZ Network on e0/1 Inside Network on e0/2-7 DMZ Network has DHCPD Enabled. DMZ DHCPD Pool is 192.168.15.50-192.168.15.250 DMZ Network needs to be able to see DNS on Inside Network at 10.10.37.11 and 10.10.37.12 DMZ Network needs to be able to access webmail on inside network at 10.10.37.15 DMZ Network needs to be able to access business website on inside network at 10.10.37.17 DMZ Network needs to be able to access the outside network (access to the internet). Inside Network has NO DHCPD. (dhcp is handled by domain controller) Inside Network needs to be able to see anything on the DMZ network. Inside Network needs to be able to access the outside network (access to the internet). There is some access-list stuff already, some static mapping already. Maps external IPs from our ISP to our inside server IPs static (inside,outside) 1.2.3.11 10.10.37.15 netmask 255.255.255.255 static (inside,outside) 1.2.3.12 10.10.37.17 netmask 255.255.255.255 static (inside,outside) 1.2.3.13 10.10.37.20 netmask 255.255.255.255 Allows access to our Webserver/Mailserver/VPN from the Outside. access-list 108 permit tcp any host 1.2.3.11 eq https access-list 108 permit tcp any host 1.2.3.11 eq smtp access-list 108 permit tcp any host 1.2.3.11 eq 993 access-list 108 permit tcp any host 1.2.3.11 eq 465 access-list 108 permit tcp any host 1.2.3.12 eq www access-list 108 permit tcp any host 1.2.3.12 eq https access-list 108 permit tcp any host 1.2.3.13 eq pptp Here is all the NAT and route stuff I have so far. global (outside) 1 interface global (outside) 2 1.2.3.11-1.2.3.14 netmask 255.255.255.248 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 1.2.3.9 1

  Read the article

• Cannot read status the monit daemon, even with allowed group

  - by jefflunt

  I cannot seem to get monit status or other CLI commands to work. I've built monit v5.8 to run on a Raspberry Pi. I'm able to add services to be monitored, and the web interface can be accessed just fine, as I've set it up for public read-only access (it's a test server, not my final production setup, so not a big deal right now). Problem is, when I run monit status while logged in as root I get: # monit status monit: cannot read status from the monit daemon I also have monit started on boot via this /etc/inittab file entry: mo:2345:respawn:/usr/local/bin/monit -Ic /etc/monitrc I've verified that monit is running, and I'm getting email alerts anytime I either kill the monit process manually, or reboot my raspberry pi. So, next I check my monitrc file permissions to see which group is allowed access. # ls -al /etc/monitrc -rw------- 1 root root 2359 Aug 24 14:48 /etc/monitrc Here's my relevant allow section of the control file. set httpd port 80 allow [omitted] readonly allow @root allow localhost allow 0.0.0.0/0.0.0.0 Also tried setting permissions on this file to 640 to allow group read permissions, but no matter what I try I either get the same error as noted above, or when the permissions are set to 640 I get: # monit status monit: The control file '/etc/monitrc' must have permissions no more than -rwx------ (0700); right now permissions are -rw-r----- (0640). What am I missing here? I know that the httpd must be enabled, as that's the interface that the CLI uses to get information (or so I've read), so I've done that. And in terms of monit doing its monitoring job and sending email alerts, that's all working as well. Here's my entire monitrc file - again, this is version v5.8, and it was build with both PAM and SSL support. The process runs under the root user: # Global settings set daemon 300 with start delay 5 set logfile /var/log/monit.log set pidfile /var/run/monit.pid set idfile /var/run/.monit.id set statefile /var/run/.monit.state # Mail alerts ## Set the list of mail servers for alert delivery. Multiple servers may be ## specified using a comma separator. If the first mail server fails, Monit # will use the second mail server in the list and so on. By default Monit uses # port 25 - it is possible to override this with the PORT option. # set mailserver smtp.gmail.com port 587 username [omitted] password [omitted] using tlsv1 ## Send status and events to M/Monit (for more informations about M/Monit ## see http://mmonit.com/). By default Monit registers credentials with ## M/Monit so M/Monit can smoothly communicate back to Monit and you don't ## have to register Monit credentials manually in M/Monit. It is possible to ## disable credential registration using the commented out option below. ## Though, if safety is a concern we recommend instead using https when ## communicating with M/Monit and send credentials encrypted. # # set mmonit http://monit:[email protected]:8080/collector # # and register without credentials # Don't register credentials # # ## Monit by default uses the following format for alerts if the the mail-format ## statement is missing:: set mail-format { from: [email protected] subject: $SERVICE $DESCRIPTION message: $EVENT Service: $SERVICE Date: $DATE Action: $ACTION Host: $HOST Description: $DESCRIPTION Monit instance provided by chicagomeshnet.com } # Web status page set httpd port 80 allow [omitted] readonly allow @root allow localhost allow 0.0.0.0/0.0.0.0 ## You can set alert recipients whom will receive alerts if/when a ## service defined in this file has errors. Alerts may be restricted on ## events by using a filter as in the second example below.

  Read the article

• Postfix on Snow Leopard unable to send MIME emails, including header contents in message body

  - by devvy

  I configured postfix on snow leopard by adding the following line to /etc/hostconfig: MAILSERVER=-YES- I then configured postfix to relay through my ISP's SMTP server. I added the following two lines in their respective places within /etc/postfix/main.cf: myhostname = 1and1.com relayhost = shawmail.vc.shawcable.net I then have a simple PHP mail function wrapper as follows: send_email("[email protected]", "[email protected]", "Test Email", "<p>This is a simple HTML email</p>"); echo "Done"; function send_email($from,$to,$subject,$message){ $header="From: <".$from."> "; $header.= 'MIME-Version: 1.0' . " "; $header.= 'Content-type: text/html; charset=iso-8859-1' . " "; $send_mail=mail($to,$subject,$message,$header); if(!$send_mail){ echo "ERROR"; } } With this, I am receiving an e-mail that appears to be improperly formatted. The message header is showing up in the body of the e-mail. The raw message content is as follows: Return-Path: <[email protected]> Delivery-Date: Tue, 27 Apr 2010 18:12:48 -0400 Received: from idcmail-mo2no.shaw.ca (idcmail-mo2no.shaw.ca [64.59.134.9]) by mx.perfora.net (node=mxus2) with ESMTP (Nemesis) id 0M4XlU-1NCtC81GVY-00z5UN for [email protected]; Tue, 27 Apr 2010 18:12:48 -0400 Message-Id: <[email protected]> Received: from pd6ml3no-ssvc.prod.shaw.ca ([10.0.153.149]) by pd6mo1no-svcs.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:47 -0600 X-Cloudmark-SP-Filtered: true X-Cloudmark-SP-Result: v=1.0 c=1 a=VphdPIyG4kEA:10 a=hATtCjKilyj9ZF5m5A62ag==:17 a=mC_jT1gcAAAA:8 a=QLyc3QejAAAA:8 a=DGW4GvdtALggLTu6w9AA:9 a=KbDtEDGyCi7QHcNhDYYwsF92SU8A:4 a=uch7kV7NfGgA:10 a=5ZEL1eDBWGAA:10 Received: from unknown (HELO 1and1.com) ([24.84.196.104]) by pd6ml3no-dmz.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:48 -0600 Received: by 1and1.com (Postfix, from userid 70) id BB08D14ECFC; Tue, 27 Apr 2010 15:12:47 -0700 (PDT) To: [email protected] Subject: Test Email X-PHP-Originating-Script: 501:test.php Date: Tue, 27 Apr 2010 18:12:48 -0400 X-UI-Junk: AutoMaybeJunk +30 (SPA); V01:LYI2BGRt:7TwGx5jxe8cylj5nOTae9JQXYqoWvG2w4ZSfwYCXmHCH/5vVNCE fRD7wNNM86txwLDTO522ZNxyNHhvJUK9d2buMQuAUCMoea2jJHaDdtRgkGxNSkO2 v6svm0LsZikLMqRErHtBCYEWIgxp2bl0W3oA3nIbtfp3li0kta27g/ZjoXcgz5Sw B8lEqWBqKWMSta1mCM+XD/RbWVsjr+LqTKg== Envelope-To: [email protected] From: <[email protected]> MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 Message-Id: <[email protected]> Date: Tue, 27 Apr 2010 15:12:47 -0700 (PDT) <p>This is a simple HTML email</p> And here are the contents of my /var/log/mail.log file after sending the email: Apr 27 15:29:01 User-iMac postfix/qmgr[705]: 74B1514EDDF: removed Apr 27 15:29:30 User-iMac postfix/pickup[704]: 25FBC14EDF0: uid=70 from=<_www> Apr 27 15:29:30 User-iMac postfix/master[758]: fatal: open lock file pid/master.pid: unable to set exclusive lock: Resource temporarily unavailable Apr 27 15:29:30 User-iMac postfix/cleanup[745]: 25FBC14EDF0: message-id=<[email protected]> Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: from=<[email protected]>, size=423, nrcpt=1 (queue active) Apr 27 15:29:30 User-iMac postfix/smtp[747]: 25FBC14EDF0: to=<[email protected]>, relay=shawmail.vc.shawcable.net[64.59.128.135]:25, delay=0.21, delays=0.01/0/0.1/0.1, dsn=2.0.0, status=sent (250 ok: Message 25784419 accepted) Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: removed Two other people in the office have followed the exact same process and are running the exact same script, version of snow leopard, php, etc. and everything is working fine for them. I've even copied their config files to my machine, restarted postfix, restarted apache, all to no avail. Does anyone know what steps I could take to resolve the issue? This is boggling my mind... Thanks

  Read the article

• Specifying a Postfix Instance to send outbound email

  - by Catherine Jefferson

  I have a CentOS 6.5 server running Postfix 2.6x (the default distribution) with five public IPv4 IPs bound to it. Each IP has DNS and rDNS set separately. Each uses a different hostname at a different domain. I have five Postfix instances, one bound to each IP, like this example: 192.168.34.104 red.example.com /etc/postfix 192.168.36.48 green.example.net /etc/postfix-green 192.168.36.49 pink.example.org /etc/postfix-pink 192.168.36.50 orange.example.info /etc/postfix-orange 192.168.36.51 blue.example.us /etc/postfix-blue I've tested each IP by telneting to port 25. Postfix answers and banners properly with the correct hostname. Email is received on all of these instances with no problems and is routed to the correct place. This setup, minus the final instance, has existed for a couple of years and works. I never bothered to set up outbound email to go through any but the main instance, however; there was no need. Now I need to send email from blue.example.us that actually leaves from that interface and IP, such that the Received headers show blue.example.us as the sending mailhost, so that SPF and DKIM validate, etc etc. The email that will be sent from blue.example.com is a feedback loop sent by a single shell account on the server (account5), an account that is dedicated to sending this email. The account receives the feedback loop emails from servers on other networks, saves the bodies of those emails, and then generates a new outbound email header, appends the saved body, and sends the email. It's sending by piping each email to sendmail -oi -t. We're doing it this way to mask the identities of the initial servers. The procmail script that processes these emails works correctly. However, I cannot configure this account to send email through the proper Postfix instance/IP/interface. The exact same account and script sends email through the main Postfix instance /etc/postfix without any issues. When I change MAIL_CONFIG to point to /etc/postfix-blue in either .bash_profile or the Procmail script that handles this email, though, I get this error: sendmail: fatal: User account5(###) is not allowed to submit mail I've read the manuals on Postfix.org, searched Google, and tried the suggestions in three previous answers here on ServerFault.com: Postfix - specify interface to deliver outbound mail on Postfix user is not allowed to submit mail Postfix rejects php mails I have been careful to stop and restart Postfix after each configuration change, and tested the results. Nothing has worked. The main postfix instance happily accepts outbound email from account5. The postfix-blue instance continues to reject email from account5 with the sendmail error above. As tempting as it is to blame machine hostility, I know that I must be missing something or doing something wrong. Does anybody have any suggestions as to what it might be? Please feel free to ask for further information about my setup if you need it. =-=-=-=-=-=-=-=-=-= At the request of the responder, here are main.cf and master.cf for a) the main postfix instance ("red.example.com") and b) the FBL instance ("blue.example.us") [NOTE: All parameters not specified below were left at the default Postfix 2.6 settings] MAIN: master.cf smtp inet n - n - - smtpd main.cf myhostname = red.example.com mydomain = example.com inet_interfaces = $myhostname, localhost inet_protocols = all lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname, localhost.$mydomain, localhost local_recipient_maps = mynetworks = 192.168.34.104/32 relay_domains = example.com, example.info, example.net, example.org, example.us relayhost = [192.168.34.102] # Separate physical server, main mailserver. relay_recipient_maps = hash:/etc/postfix/relay_recipients alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases smtpd_banner = $myhostname ESMTP $mail_name multi_instance_wrapper = ${command_directory}/postmulti -p -- multi_instance_enable = yes multi_instance_directories = /etc/postfix-green /etc/postfix-pink /etc/postfix-orange /etc/postfix-blue FBL: master.cf 184.173.119.103:25 inet n - n - - smtpd main.cf myhostname = blue.example.us mydomain = blue.example.us <= Deliberately set to subdomain only. myorigin = $mydomain inet_interfaces = $myhostname lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname local_recipient_maps = unix:passwd.byname $alias_maps $virtual_alias_maps mynetworks = 192.168.36.51/32, 192.168.35.20/31 <= Second IP is backup MX servers relay_domains = $mydestination recipient_canonical_maps = hash:/etc/postfix-blue/canonical virtual_alias_maps = hash:/etc/postfix-fbl/virtual alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical mailbox_command = /usr/bin/procmail -a "$EXTENSION" DEFAULT=$HOME/Mail/ MAILDIR=$HOME/Mail smtpd_banner = $myhostname ESMTP $mail_name authorized_submit_users = multi_instance_name = postfix-blue multi_instance_enable = yes

  Read the article

• outlook iptables configuration [update]

  - by mediaexpert

  I've a Debian mail server, but only the outlook users can't be able to download the emails. I've seen a lot of post about some kind of forwarding port configuration, I've tried some commands, but I don't be able to solve this problem, please help me. [LAST UPDATE] I find a lot of TIME WAIT on ipv6 netstat tcp6 0 0 my.mailserver.it:imap2 200-62-245-188.ip2:17060 TIME_WAIT - below some config files: pop3d I think the problem was here ##NAME: POP3AUTH:1 # # To advertise the SASL capability, per RFC 2449, uncomment the POP3AUTH # variable: # # POP3AUTH="LOGIN" # # If you have configured the CRAM-MD5, CRAM-SHA1 or CRAM-SHA256, set POP3AUTH # to something like this: # # POP3AUTH="LOGIN CRAM-MD5 CRAM-SHA1" POP3AUTH="" ##NAME: POP3AUTH_ORIG:1 # # For use by webadmin POP3AUTH_ORIG="PLAIN LOGIN CRAM-MD5 CRAM-SHA1 CRAM-SHA256" ##NAME: POP3AUTH_TLS:1 # # To also advertise SASL PLAIN if SSL is enabled, uncomment the # POP3AUTH_TLS environment variable: # # POP3AUTH_TLS="LOGIN PLAIN" POP3_TLS_REQUIRED = 0 POP3AUTH_TLS="" ##NAME: POP3AUTH_TLS_ORIG:0 # # For use by webadmin POP3AUTH_TLS_ORIG="LOGIN PLAIN" ##NAME: POP3_PROXY:0 # # Enable proxying. See README.proxy # # For use by webadmin POP3AUTH_TLS_ORIG="LOGIN PLAIN" ##NAME: POP3_PROXY:0 # # Enable proxying. See README.proxy POP3_PROXY=0 ##NAME: PROXY_HOSTNAME:0 # # Override value from gethostname() when checking if a proxy connection is # required. # PROXY_HOSTNAME= ##NAME: PORT:1 ##NAME: PROXY_HOSTNAME:0 # # Override value from gethostname() when checking if a proxy connection is # required. # PROXY_HOSTNAME= ##NAME: PORT:1 # # Port to listen on for connections. The default is port 110. # # Multiple port numbers can be separated by commas. When multiple port # numbers are used it is possibly to select a specific IP address for a # given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900" # accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1 # The ADDRESS setting is a default for ports that do not have a specified # IP address. # Port to listen on for connections. The default is port 110. # # Multiple port numbers can be separated by commas. When multiple port # numbers are used it is possibly to select a specific IP address for a # given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900" # accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1 # The ADDRESS setting is a default for ports that do not have a specified # IP address. PORT=110 ##NAME: ADDRESS:0 # # IP address to listen on. 0 means all IP addresses. ADDRESS=0 ##NAME: TCPDOPTS:0 # ##NAME: ADDRESS:0 # # IP address to listen on. 0 means all IP addresses. ADDRESS=0 ##NAME: TCPDOPTS:0 # # Other couriertcpd(1) options. The following defaults should be fine. # TCPDOPTS="-nodnslookup -noidentlookup" ##NAME: LOGGEROPTS:0 # # courierlogger(1) options. # LOGGEROPTS="-name=pop3d" ##NAME: DEFDOMAIN:0 # # Optional default domain. If the username does not contain the # first character of DEFDOMAIN, then it is appended to the username. # If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended # only if the username does not contain any character from DOMAINSEP. # You can set different default domains based on the the interface IP # address using the -access and -accesslocal options of couriertcpd(1). DEFDOMAIN="@interzone.it" ##NAME: POP3DSTART:0 # # POP3DSTART is not referenced anywhere in the standard Courier programs # or scripts. Rather, this is a convenient flag to be read by your system # startup script in /etc/rc.d, like this: # # . /etc/courier/pop3d DEFDOMAIN="@mydomain.com" ##NAME: POP3DSTART:0 # # POP3DSTART is not referenced anywhere in the standard Courier programs # or scripts. Rather, this is a convenient flag to be read by your system # startup script in /etc/rc.d, like this: # # . /etc/courier/pop3d # case x$POP3DSTART in # x[yY]*) # /usr/lib/courier/pop3d.rc start # ;; # esac # # The default setting is going to be NO, until Courier is shipped by default # with enough platforms so that people get annoyed with having to flip it to # YES every time. # x[yY]*) # /usr/lib/courier/pop3d.rc start # ;; # esac # # The default setting is going to be NO, until Courier is shipped by default # with enough platforms so that people get annoyed with having to flip it to # YES every time. POP3DSTART=YES ##NAME: MAILDIRPATH:0 # # MAILDIRPATH - directory name of the maildir directory. # MAILDIRPATH=.maildir iptables Chain INPUT (policy DROP 20 packets, 1016 bytes) pkts bytes target prot opt in out source destination 60833 16M ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 state NEW,ESTABLISHED 18970 971K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp spts:1024:65535 dpt:110 state NEW,ESTABLISHED Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 192.168.0.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 192.168.1.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110 pop3d.cnf RANDFILE = /usr/lib...pop3d.rand [req] default_bits = 1024 encrypt_key = yes distinguidhed_name = req_dn x509_extensions = cert_type prompt = no [req_dn] C=US ST=NY L= New York O=Courier Mail Server OU=Automatically-generated POP3 SSL key CN=localhost [email protected] [cert_type] nsCertType = server

  Read the article

• pagination for displaytag with colorbox in Spring framework

  - by Hitesh Solanki

  Hi..... I want to display the pop up for user selection using colorbox. I have put link on manageblacklist.jsp named 'select'. when I click on 'select' link ,colorbox is displayed. all user is displayed but pagination is not worked. I have used display tag for pagination. Without using colorbox, pagination is worked fine. I have used spring framework. The code of manageblacklist.jsp is given below: <%@ page contentType="text/html" pageEncoding="UTF-8" import="java.util.*"%> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <%@ include file="/WEB-INF/jsp/include.jsp" %> <%@ taglib prefix="form" uri="http://www.springframework.org/tags/form" %> <%@ taglib uri="http://displaytag.sf.net" prefix="display" %> <%@ page import="com.sufalam.mailserver.bean.User"%> <%@ page import="javax.servlet.http.HttpSession" %> <% String pageSize = (String) request.getAttribute("pageSize"); System.out.println("page size:" + pageSize); HttpSession session1 = request.getSession(); List<User> userList = (List<User>) session1.getAttribute("userList"); Iterator iterator = userList.iterator(); String user = (String) request.getAttribute("user"); System.out.println("user in the jsp :" + user); %> <html> <head> <script type="text/javascript" src="js/jquery142.js"></script> <script type="text/javascript" src="js/jquery.colorbox.js"></script> <link rel="stylesheet" href="style/colorbox.css" type="text/css"> <script type="text/javascript"> $(document).ready(function(){ //Examples of how to assign the ColorBox event to elements $(".example5").colorbox(); //Example of preserving a JavaScript event for inline calls. $("#click").click(function(){ $('#click').css({"background-color":"#f00", "color":"#fff", "cursor":"inherit"}).text("Open this window again and this message will still be here."); return false; }); }); </script> <script type="text/javascript"> function changePageSize() { var myValue = document.getElementById("combo1").value; document.getElementById("selectedPageSize").value=myValue; document.whitelistBlacklistForm.submit(); } function selectAll() { var selectAll = document.getElementById("checkAll"); var returnById = document.getElementsByName("check"); var i; var val; if (selectAll.checked == true) { val = true; } else { val = false; } for (i = 0; i < returnById.length; i++) { returnById[i].checked = val; } } function onload() { insertNavigation ('insertHereTop', 'insertHereBottom'); } function insertNavigation( topElementID, BottomElementID ) { if ( document.getElementById('pagingBanner') ){ document.getElementById(topElementID).innerHTML=document.getElementById('pagingBanner').innerHTML; document.getElementById(BottomElementID).innerHTML=document.getElementById('pagingBanner1').innerHTML; } } function confirmDelete() { if (confirm("Are you sure you want to delete selected records?")) { flag = 1; return true; } else { return false; } } function loadModels() { var flag=true; var textValue = document.getElementById('txtuser'); $.getJSON("ajaxblacklist.htm", // url { param :textValue.value }, // request params function(json) { // callback // var options = '<table class="displayTable" cellspacing="0"><thead><tr><th align = "center">Blacklisted Sender</th>'+ // '<th align ="center">Delete</th></tr></thead><tbody>'; var options = '<table width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td style="background:url(images/leftbg.gif) repeat-y; width:8px;"></td>' + '<td class="middlesection"><table width="100%" border="0" cellspacing="0" cellpadding="0"><tr>' + '<td height="30" class="p10"><table width="100%" border="0" cellspacing="0" cellpadding="0" class="allboder" >' + '<tr><td class="tebelhd"> Blacklisted Sender </td></tr>'; for (i in json) { var state = json[i]; for(j in state){ var op = state[j]; if(op.length==undefined){ options += '<tr><td class="tdhd"><table width="0%" border="0" cellspacing="0" cellpadding="0"><tr><td width="741">'+ state[j].senderEmail + '</td><td align="center" width="148"><a href="managewhitelistblacklist.htm?sender='+state[j].senderEmail+'&recipient='+ state[j].recipientEmail+'&action=delete"><span> <img src="/MailServerV2/images/delete.gif"/> </span></a></td></tr></table></td></tr>'; break; } for(k in op) { if(flag == true) { flag = false; options += '<tr><td class="tdhd"><table width="0%" border="0" cellspacing="0" cellpadding="0"><tr>'; } else { flag = true; options += '<tr><td class="tdhd2"><table width="0%" border="0" cellspacing="0" cellpadding="0"><tr>'; } options += '<td width="741">'+ op[k].senderEmail +'</td><td align="center" width="148"><a href="managewhitelistblacklist.htm?sender='+op[k].senderEmail+'&recipient='+op[k].recipientEmail+'&action=delete"><span> <img src="/MailServerV2/images/delete.gif"/> </span></a></td></tr></table></td></tr>'; } } } options += '</td></tr></table>'; $("div[name^=blacklist]").html(options); }); } </script> </head> <body> <table width="" border="0" align="center" cellpadding="0" cellspacing="0" class="maintable"> <tr> <td class="topsection"><table width="100%" border="0" cellspacing="0" cellpadding="0"> <tr> <td valign="top" align="center" class="middlesection" ><table width="96%" border="0" cellspacing="0" cellpadding="0"> <tr> <td >&nbsp;</td> </tr> <tr> <td> <table width="100%" border="0" cellspacing ="0" cellpadding="0"> <tr> <td> <table width="100%" border="0" cellspacing="0" cellpadding="3"> <tr> <td align="left" valign="middle"><h1>Manage Blacklist</h1></td> <td align="right" valign="bottom"><div style="float:right;"><a href="savewhitelistblacklist.htm" class="buttonash"><span>Create Whitelist Blacklist </span></a></div></td> </tr> </table></td> </tr> <tr> <td class="bottomboder"><img src="images/ashish.gif" height="1" /></td> </tr> </table> </td> </tr> <tr> <td>&nbsp;</td> </tr> <tr> <td> </td> </tr> <tr> <td> <div id="TabbedPanels1" class="TabbedPanels"/> <div style="display: block;" class="TabbedPanelsContent"/> <div align="left" class="tebelhd"> Blacklist Information </div><div class="entry-edit"> <div class="fieldset" id="base_fieldset"> <div class="hor-scroll_1" align="left"> <fieldset Class="label1css" style="color:#666666"> <legend>Fields</legend> <table> <tr> <td align="right"> Recipient Email : </td> <td><input type="text" id="txtuser" name="txtuser" <% if (user != null) { %> value="<%=user%>" <% } else { %> value="" <% } %> /> </td> <td><a href="#" class="buttonash" onclick="loadModels()"><span>Search</span></a></td> <!-- <td><a href="javascript:void(0)" class="buttonash" onclick="window.open('selectuser.htm','selectuser','width=600,height=400,menubar=yes,status=yes,location=yes,toolbar=yes,scrollbars=yes');" ><span>Select</span></a></td>--> <td><a href="selectuser.htm" class="example5 buttonash" ><span>Select</span></a> </td> <td align="right"> </td> </tr> </table> </fieldset> <div id="blacklist" name="blacklist"></div> </div> </div> </div> </td> </tr> </table> </td> </tr> </table> </td> <!-- InstanceEndEditable --> <td style="background:url(images/rightbg.gif) repeat-y; width:8px;"></td> </tr> </table> <% // session1.removeAttribute("user"); %> </body> </html> So , please tell me how to work pagination .... Thanks in advanced...

  Read the article

< Previous Page | 3 4 5 6 7