Search Results

Search found 219 results on 9 pages for 'mib'.

Page 7/9 | < Previous Page | 3 4 5 6 7 8 9  | Next Page >

• Connection timeout when accessing Github

  - by Felipe Micaroni Lalli

  I have exactly the same problem as described here: http://stackoverflow.com/questions/12849986/connection-timeout-when-accessing-github So I'll just copy & paste: I have some weird problems. When I try to log in my Github account, I get a "net::ERR_EMPTY_RESPONSE" error. I tried with Chrome, Firefox and Opera. In Firefox, if a clean the cache and offline data, it works for a while. Then I can log in, but I still can't create a Github repository, even if I clear the cache again. My friend, in the same network, with Windows, can do whatever he wants on Github's web site, but I can't. I tried many DNS servers, I tried not to set it (my friend doesn't), but it's still not working. My OS: Ubuntu x64 12.04 Ideas, please. And thanks. Also, I can clone any repo but I can't push. I had to change to https://codeplane.com/ due to this problem, but I want to understand why it happens. EDIT: I could clone one repo, but the other one just hangs at this point: felipelalli@felipelalli-Studio-XPS-8100:~/wa$ git clone [email protected]:felipelalli/micaroni.git Cloning into 'micaroni'... remote: Counting objects: 5238, done. remote: Compressing objects: 100% (3257/3257), done. Receiving objects: 92% (4839/5238), 43.29 MiB | 902 KiB/s

  Read the article

• snmpd agent sends duplicate traps

  - by jsnmp

  I am on Ubuntu 10.04.4 LTS, and I cannot upgrade to a higher version. I have installed the snmpd agent (NET-SNMP version 5.4.2.1) with an apt-get install snmpd command. When an event occurs which sends a trap, two traps are sent for each such event instead of one. For example, when I shut down the agent with command /etc/init.d/snmpd stop, two shutdown traps are sent to the destination host. If I then start back up the agent with command /etc/init.d/snmpd start, then two cold start traps are sent to the destination host. Is this a known issue? Is there a fix for this, or is there a configuration change that is needed to prevent the sending of the duplicate trap? These are the contents of the /etc/snmp/snmpd.conf file: rocommunity public authtrapenable 1 trap2sink <trap destination hostname> public These are the contents of the /etc/default/snmpd file: # This file controls the activity of snmpd and snmptrapd # MIB directories. /usr/share/snmp/mibs is the default, but # including it here avoids some strange problems. export MIBDIRS=/usr/share/snmp/mibs # snmpd control (yes means start daemon). SNMPDRUN=yes # snmpd options (use syslog, close stdin/out/err). SNMPDOPTS='-Ls3d -Lf /dev/null -u snmp -p /var/run/snmpd.pid -c /etc/snmp/snmpd.conf' # snmptrapd control (yes means start daemon). As of net-snmp version # 5.0, master agentx support must be enabled in snmpd before snmptrapd # can be run. See snmpd.conf(5) for how to do this. TRAPDRUN=no # snmptrapd options (use syslog). TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid' # create symlink on Debian legacy location to official RFC path SNMPDCOMPAT=yes

  Read the article

• Convert mkv to mp4 with ffmpeg

  - by JohnS

  When I try converting mkv to mp4 using ffmpeg, the following error occurs: [ipod @ 0x16fa0a0] Application provided invalid, non monotonically increasing dts to muxer in stream 0: -2 = -2 av_interleaved_write_frame(): Invalid argument I used this command to convert the file: ffmpeg -i input.mkv -vcodec copy -acodec copy -absf aac_adtstoasc output.m4v The input file has the following characteristics: mediainfo input.mkv General Unique ID : 200459305952356554213392832683163418790 (0x96CF0ED8DB5914CBB9E18163689280A6) Complete name : input.mkv Format : Matroska Format version : Version 2 File size : 1.46 GiB Duration : 1h 5mn Overall bit rate : 3 168 Kbps Encoded date : UTC 2010-09-26 21:44:02 Writing application : mkvmerge v2.9.5 ('Tu es le seul') built on Jun 17 2009 16:28:30 Writing library : libebml v0.7.8 + libmatroska v0.8.1 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Format settings, CABAC : Yes Format settings, ReFrames : 4 frames Codec ID : V_MPEG4/ISO/AVC Duration : 1h 5mn Bit rate : 2 910 Kbps Width : 1 280 pixels Height : 720 pixels Display aspect ratio : 16:9 Frame rate : 25.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.126 Stream size : 1.31 GiB (90%) Writing library : x264 core 105 r1724 b02df7b Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=6 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=18 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=0 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc=2pass / mbtree=0 / bitrate=2910 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00 Default : Yes Forced : No Audio ID : 2 Format : AC-3 Format/Info : Audio Coding 3 Mode extension : CM (complete main) Codec ID : A_AC3 Duration : 1h 5mn Bit rate mode : Constant Bit rate : 256 Kbps Channel(s) : 2 channels Channel positions : Front: L R Sampling rate : 48.0 KHz Bit depth : 16 bits Compression mode : Lossy Stream size : 121 MiB (8%) Language : English Default : Yes Forced : No Being new to ffmpeg, I'm not sure what the error means or how to correct it. Thanks!

  Read the article

• What is the advantage to using a factor of 1024 instead of 1000 for disk size units?

  - by Joe Z.

  When considering the disk space of a storage medium, normally the computer or operating system will represent it in terms of powers of 1024 - a kilobyte is 1,024 bytes, a megabyte is 1,048,576 bytes, a gigabyte is 1,073,741,824 bytes, and so on. But I don't see any practical reason why this convention was adopted. Usually when disk size is represented in kilo-, mega-, or giga-bytes, it has to be converted into decimal first. In places where a power-of-two byte count actually matters (like the block size on a file system), the size is given in bytes anyway (e.g. 4096 bytes). Was it just a little aesthetic novelty that computer makers decided to adopt, but storage medium vendors decided to disregard? Whenever you buy a hard drive, there's always a disclaimer nowadays that says "One gigabyte means one billion bytes". It would feel like using the binary definition of "gigabyte" would artificially inflate the byte count of a device, making drive-makers have to pack 1.1 terabytes into a drive in order to have it show up as "1 TB", or to simply pack 1 terabyte in and have it show up as "931 GB" (and most of them do the latter). Some people have decided to use units like "KiB" or "MiB" in favour of "KB" and "MB" in order to distinguish the two. But is there any merit to the binary prefixes in the first place? There's probably a bit of old history I'm not aware of on this topic, and if there is, I'm looking for somebody to explain it. (Apologies if this is in the wrong place. I felt that a question on best practice might belong here, but I have faith that it will be migrated to the right place if it's incorrect.)

  Read the article

• Kernel panic on reboot after failed logical volume resize

  - by Derek

  I attempted to do a logical volume resize yesterday using the follwoing commands $sudo pvdisplay "/dev/sda8" is a new physical volume of "113.11 GiB" --- NEW Physical volume --- PV Name /dev/sda8 VG Name PV Size 113.11 GiB Allocatable NO PE Size 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID jwyO1o-b2ap-CW51-kx7O-kf26-arim-SM8V6m $sudo vgextend vg /dev/sda8 sudo vgdisplay vg --- Volume group --- VG Name vg System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 9 VG Access read/write VG Status resizable MAX LV 0 Cur LV 5 Open LV 5 Max PV 0 Cur PV 2 Act PV 2 VG Size 131.74 GiB PE Size 4.00 MiB Total PE 33725 Alloc PE / Size 4769 / 18.63 GiB Free PE / Size 28956 / 113.11 GiB VG UUID AhusW2-pzFv-3W32-mpv2-s5VG-FN7S-kVSadx $sudo lvresize -L +20GB /dev/mapper/vg-var So as you can see, it looks like adding the physical volume to the vg worked, because i see free space available there. When I typed the lvresize command, it never returned. I let this run overnight in the background, but this morning I still couldnt successfully do a "pvdisplay" or "lvdisplay" because I think it was waiting on a lock or something, so the command never returned. When i went to log onto the server's console, I saw a bunch of messages like: rcu_sched_state detected stall on cpu 2 Now when I boot, I get a kernel panic error, and a message about not being able to mount /mapper/vg-root cannot open root device "mapper/vg-root" or unknown_block(0,0) Kernel Panic -not syncing: VFS: Unable to mount root file system on unknown_block(0,0) What should I do to get my system back up and running? Did I attempt to do the logical volume resize correctly? Thanks

  Read the article

• Partition Alignment Confusion

  - by user170757

  I have a new Samsung 840 250GB SSD on the way, and I want to make sure that everything is running optimally after install. I've spent many frustrating hours on the internet trying to understand how I should align the partitions of the SSD when it arrives (and even how to partition everything; my other drive is a 1TB HDD with files already on it). I'd like to know a foolproof way of setting everything up. Now, the only place I could find the erase block size of the 840 is here: http://thessdreview.com/Forums/ssd-beginners-guide-discussion/3630.htm I simply can't understand why such information isn't made freely accessible by manufacturers! But, anyway, this would suggest the EBS is 1536kb, which seems odd to me. It is to my understanding that you should now align by MiB (usually set at 1MiB). I assume that the figure above should actually be 1536k B=1.5MiB? This seems to suggest the partition alignment will be somewhat non-standard. So my question is: How do I align my partitions given this information? Please bear in mind that I have never used linux before; I'm doing my best to get everything set up so that I can begin to learn but am finding this process incredibly opaque and time consuming. If possible, a step by step guide through GParted would be great; at the moment I'm considering an NTFS partition ~20GB for Windows (playing games), an EXT4 ~20GB for ubuntu (for doing everything else) and a shared documents+games partition for everything else in NTFS file format. I'm not going to have any swap partition and use swap files instead.

  Read the article

• Ubuntu One, compressed files

  - by user8179

  I have uploaded some files to my Ubuntu One account and it seems to work great most of the time. I usually upload them directly from Nautilus by right clicking the folder, using the ”Synchronize this folder” option, and then I make sure that the file I want to upload is published. Then I usually test the whole thing by trying to download it. I right click the file again to get its URL and I paste it into my Web browser. This usually works fine. But yesterday I uploaded two compressed files – ”.tar.bz2”. When I tried to open them after downloading them with my Web browser (Opera), it failed. I found that the file was bigger than the original file (2358 B instead af 2335 B – 15 B added at the beginning of the file and 8 B added to the end), and someone at the Opera channel (IRC) at OperaNet (Europe) figured out that the reason for this is that the server compress the file again, ”without telling Opera”. So to be able to extract the file I need to add ”.gz” to the file name and then extract it twice. If I downloaded it with Firefox however, I didn't need to do that, so maybe Firefox figured this out somehow in a way that Opera does not. Someone also tried to download the file with wget and some other browser and he also got the same result as I did with Opera, that is the file is compressed a second time by the server. I guess ”the server” is the Ubuntu One server, right? So why is this? Could it be done better somehow? Or did I do something wrong when uploading the files? It also seems like this extra compressing thing does not always happen, because when I tried again a few minutes ago, the file came down with its right size (2335 B), without an extra compression. But the other file (114 MiB) was still compressed twice.

  Read the article

• Ubuntu 12.04 Very slow especially with Android Studio

  - by Dew

  I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB, I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time. Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet. I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change. Please if you have any suggestions that may help me make my laptop and Android Studio work faster I will appreciate it for you. Thank you in advance.

  Read the article

• Install Windows7 on drive with Ubuntu 12.04 already on. Is my plan good?

  - by John F

  I have Ubuntu 12.04 working fine, but need W7 occasionally. I just wanted to check that my plan for installing would work? Any help appreciated. Current partitions are: Partition....@ File System @ Mount Point @ Size.....@ Used.....@ Flags /dev/sda1....@ ext4........@ /ext4a......@ 37 GiB...@ 776 MiB..@ boot /dev/sda2....@ extended....@.............@ 122 GiB..@ -........@ ./dev/sda5...@ ext4........@ / ..........@ 37 GiB...@ 6 GiB....@ .unallocated @ unallocated @.............@ 7 GiB....@ - ...... @ ./dev/sda6 ..@ ext4........@ /home.......@ 77 GiB...@ 32 GiB...@ .unallocated @ unallocated @.............@ 65 GiB...@ - .......@ /dev/sda3...@ linux-swap..@.............@ 7 GiB....@ - .......@ My plan is to: - boot to ubuntu from USB ISO - change sda1 to NTFS - install W7 to sda1 - use the "Master Boot Record repair" utility to configure dual boot so I can see my original ubuntu installation as well as W7. Have I missed something? I'm concerned as to what the 776MB is that will be overwritten by the change to NTFS. It seems large for just the MBR? Would also appreciate it if anyone can explain what sda5 and 6 are being used for? Is sda5 Ubuntu and sda6 my data? Thanks in advance.

  Read the article

• Librated error when creating partition table

  - by Marko

  I bought a Dell Inspiron 5521 laptop a few days ago that came with Ubuntu preinstalled. I haven't used Ubuntu yet, and I don't have any experience in using it. I wanted to install Windows 7 64-bit on my laptop alongside Ubuntu, and made two bootable USB drives with Gparted and Windows 7. There wasn't a suitable partition on my laptop in which I could install Windows 7. I've read the instructions for using Gparted to create or manage my hard drive. I inserted the USB, booted from BIOS, and followed the procedure in installing Gparted. Then I entered Gparted, and the following error occurred: Librated error when Creating partition table. It asked me to click on either OK or Cancel. Either way I had my hard disk shown to me in the user window, in partitions that were made by the manufacturer: Partition File sys Label Size Flags /dev/sda1 fat32 dellutility 300.00 Mib diag /dev/sda2 fat32 os 3.00 Gib lba /dev/sda3 ext4 912.46 Gib boot /dev/sda4 extended 15.75 Gib (had a subpart) /dev/sda5 linux-swap 15.75 Gib ...and a option to switch to dev/sdb that's unused and of capacity 3Gib. I've used the biggest partition 912.46 Gib, and tried to reduce its size, and clicked OK. Then when I tried to make a new partition, it said it can't make any more partitions, no more than a maximum of 5. I would like to keep Ubuntu and slowly learn, but I also need to use programs that work in Windows. Thank you for taking the time to answer my question.

  Read the article

• apt-get update mdadm scary warnings

  - by user568829

  Just ran an apt-get update on one of my dedicated servers to be left with a relatively scary warning: Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-686-bigmem W: mdadm: the array /dev/md/1 with UUID c622dd79:496607cf:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/2 with UUID 24120323:8c54087c:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/6 with UUID eef74de5:9267b2a1:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/5 with UUID 5d45b20c:04d8138f:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. As instructed I inspected the output of /usr/share/mdadm/mkconf and compared with /etc/mdadm/mdadm.conf and they are quite different. Here is the /etc/mdadm/mdadm.conf contents: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md0 level=raid1 num-devices=2 UUID=b93b0b87:5f7c2c46:0043fca9:4026c400 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=c0fa8842:e214fb1a:fad8a3a2:28f2aabc ARRAY /dev/md2 level=raid1 num-devices=2 UUID=cdc2a9a9:63bbda21:f55e806c:a5371897 ARRAY /dev/md3 level=raid1 num-devices=2 UUID=eca75495:9c9ce18c:d2bac587:f1e79d80 # This file was auto-generated on Wed, 04 Nov 2009 11:32:16 +0100 # by mkconf $Id$ And here is the out put from /usr/share/mdadm/mkconf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md1 UUID=c622dd79:496607cf:c230666b:5103eba0 ARRAY /dev/md2 UUID=24120323:8c54087c:c230666b:5103eba0 ARRAY /dev/md5 UUID=5d45b20c:04d8138f:c230666b:5103eba0 ARRAY /dev/md6 UUID=eef74de5:9267b2a1:c230666b:5103eba0 # This configuration was auto-generated on Sat, 25 Feb 2012 13:10:00 +1030 # by mkconf 3.1.4-1+8efb9d1+squeeze1 As I understand it I need to replace the four lines that start with 'ARRAY' in the /etc/mdadm/mdadm.conf file with the different four 'ARRAY' lines from the /usr/share/mdadm/mkconf output. When I did this and then ran update-initramfs -u there were no more warnings. Is what I have done above correct? I am now terrified of rebooting the server for fear it will not reboot and being a remote dedicated server this would certainly mean downtime and possibly would be expensive to get running again. FOLLOW UP (response to question): the output from mount: /dev/md1 on / type ext3 (rw,usrquota,grpquota) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md2 on /boot type ext2 (rw) /dev/md5 on /tmp type ext3 (rw) /dev/md6 on /home type ext3 (rw,usrquota,grpquota) mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. mdadm --detail /dev/md1 /dev/md1: Version : 0.90 Creation Time : Sun Aug 14 09:43:08 2011 Raid Level : raid1 Array Size : 31463232 (30.01 GiB 32.22 GB) Used Dev Size : 31463232 (30.01 GiB 32.22 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:03:47 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : c622dd79:496607cf:c230666b:5103eba0 Events : 0.24 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Used Dev Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Sat Feb 25 13:20:20 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 24120323:8c54087c:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 mdadm --detail /dev/md3 mdadm: md device /dev/md3 does not appear to be active. mdadm --detail /dev/md5 /dev/md5: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 2104448 (2.01 GiB 2.15 GB) Used Dev Size : 2104448 (2.01 GiB 2.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:09:03 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 5d45b20c:04d8138f:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 5 0 active sync /dev/sda5 1 8 21 1 active sync /dev/sdb5 mdadm --detail /dev/md6 /dev/md6: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 453659456 (432.64 GiB 464.55 GB) Used Dev Size : 453659456 (432.64 GiB 464.55 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 6 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:10:00 2012 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : eef74de5:9267b2a1:c230666b:5103eba0 Events : 0.31 Number Major Minor RaidDevice State 0 8 6 0 active sync /dev/sda6 1 8 22 1 active sync /dev/sdb6 FOLLOW UP 2 (response to question): Output from /etc/fstab /dev/md1 / ext3 defaults,usrquota,grpquota 1 1 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 #usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 # # # /dev/md2 /boot ext2 defaults 1 2 /dev/sda3 swap swap pri=42 0 0 /dev/sdb3 swap swap pri=42 0 0 /dev/md5 /tmp ext3 defaults 0 0 /dev/md6 /home ext3 defaults,usrquota,grpquota 1 2

  Read the article

• Delphi: Get MAC of Router

  - by Daniel Marschall

  Hello, I am using Delphi and I want to determinate the physical MAC address of a network device in my network, in this case the Router itself. My code: var idsnmp: tidsnmp; val:string; begin idsnmp := tidsnmp.create; try idsnmp.QuickSend('.1.3.6.1.2.1.4.22.1.2', 'public', '10.0.0.1', val); showmessage(val); finally idsnmp.free; end; end; where 10.0.0.1 is my router. Alas, QuickSend does always send "Connection reset by peer #10054". I tried to modify the MIB-OID and I also tried the IP 127.0.0.1 which connection should never fail. I did not find any useable Tutorials about TIdSNMP at Google. :-( Regards Daniel Marschall

  Read the article

• git push problem -argh!

  - by phil swenson

  Dunno what's going on, no response from github on this prob so I'm asking here. Tried a git push for the first time in a month or so and got this. Turned on export GIT_CURL_VERBOSE=1 and did a push and get this: localhost:send2mobile_rails phil$ git push Password: * Couldn't find host github.com in the .netrc file; using defaults * About to connect() to github.com port 443 (#0) * Trying 207.97.227.239... * Connected to github.com (207.97.227.239) port 443 (#0) * SSL connection using DHE-RSA-AES256-SHA * Server certificate: * subject: O=*.github.com; OU=Domain Control Validated; CN=*.github.com * start date: 2009-12-11 05:02:36 GMT * expire date: 2014-12-11 05:02:36 GMT * subjectAltName: github.com matched * issuer: C=US; ST=Arizona; L=Scottsdale; O=GoDaddy.com, Inc.; OU=http://certificates.godaddy.com/repository; CN=Go Daddy Secure Certification Authority; serialNumber=07969287 * SSL certificate verify ok. > GET /303devworks/send2mobile_rails.git/info/refs?service=git-receive-pack HTTP/1.1 User-Agent: git/1.7.1 Host: github.com Accept: */* Pragma: no-cache < HTTP/1.1 401 Authorization Required < Server: nginx/0.7.61 < Date: Tue, 01 Jun 2010 10:53:13 GMT < Content-Type: text/html; charset=iso-8859-1 < Connection: keep-alive < Content-Length: 0 < WWW-Authenticate: Basic realm="Repository" < * Connection #0 to host github.com left intact * Issue another request to this URL: 'https://[email protected]/MYUSERHERE/send2mobile_rails.git/info/refs?service=git-receive-pack' * Couldn't find host github.com in the .netrc file; using defaults * Re-using existing connection! (#0) with host github.com * Connected to github.com (207.97.227.239) port 443 (#0) * Server auth using Basic with user '303devworks' > GET /303devworks/send2mobile_rails.git/info/refs?service=git-receive-pack HTTP/1.1 Authorization: Basic MzAzZGVfd29sa3M6Y29nbmwzNzIw User-Agent: git/1.7.1 Host: github.com Accept: */* Pragma: no-cache < HTTP/1.1 200 OK < Server: nginx/0.7.61 < Date: Tue, 01 Jun 2010 10:53:13 GMT < Content-Type: application/x-git-receive-pack-advertisement < Connection: keep-alive < Status: 200 OK < Pragma: no-cache < Content-Length: 153 < Expires: Fri, 01 Jan 1980 00:00:00 GMT < Cache-Control: no-cache, max-age=0, must-revalidate < * Expire cleared * Connection #0 to host github.com left intact Counting objects: 166, done. Delta compression using up to 4 threads. Compressing objects: 100% (133/133), done. * Couldn't find host github.com in the .netrc file; using defaults * About to connect() to github.com port 443 (#0) * Trying 207.97.227.239... * connected * Connected to github.com (207.97.227.239) port 443 (#0) * SSL re-using session ID * SSL connection using DHE-RSA-AES256-SHA * old SSL session ID is stale, removing * Server certificate: * subject: O=*.github.com; OU=Domain Control Validated; CN=*.github.com * start date: 2009-12-11 05:02:36 GMT * expire date: 2014-12-11 05:02:36 GMT * subjectAltName: github.com matched * issuer: C=US; ST=Arizona; L=Scottsdale; O=GoDaddy.com, Inc.; OU=http://certificates.godaddy.com/repository; CN=Go Daddy Secure Certification Authority; serialNumber=07969287 * SSL certificate verify ok. * Server auth using Basic with user 'MYUSERHERE' > POST /303devworks/send2mobile_rails.git/git-receive-pack HTTP/1.1 Authorization: Basic JzAzZGV1d29ya3M6Y25nb29zNzIq User-Agent: git/1.7.1 Host: github.com Accept-Encoding: deflate, gzip Content-Type: application/x-git-receive-pack-request Accept: application/x-git-receive-pack-result Expect: 100-continue Transfer-Encoding: chunked * The requested URL returned error: 411 * Closing connection #0 error: RPC failed; result=22, HTTP code = 411 Writing objects: 100% (140/140), 2.28 MiB | 1.93 MiB/s, done. Total 140 (delta 24), reused 0 (delta 0) ^C localhost:send2mobile_rails phil$

  Read the article

• Basic questions about SNMP

  - by David Hodgson

  Hi, I'm learning about SNMP, and writing some applications using it. I have some basic questions about the protocol: Do the agents store its state on the device itself? If there is a trap set on an agent, can you do a poll on the same OID to get the same information? Without using a mib file, is there a way to query a device for all of its information at once? If not, and you're writing your own customized manager, do you have to know the structure of what it reports up front? If you're setting up an agent to report, is there usually a way to control the frequency of how often it sends a trap? Or does it usually send a trap as often as some condition is satisfied?

  Read the article

• Fixing warning from git

  - by japancheese

  I've been doing a workflow of making a git repository on a remote central repository, cloning that repo on my local dev machine, doing some work, and then pushing the changes back to the same repo on the remote server. However, and I believe this was after an update I did to git recently, after pushing up a change, I'm getting the following warning: Counting objects: 2724, done. Delta compression using up to 2 threads. Compressing objects: 100% (2666/2666), done. Writing objects: 100% (2723/2723), 5.90 MiB | 313 KiB/s, done. Total 2723 (delta 219), reused 0 (delta 0) warning: updating the currently checked out branch; this may cause confusion, as the index and working tree do not reflect changes that are now in HEAD. Can someone explain to me exactly what this warning means, and what I'm doing wrong in my workflow to not receive this warning?

  Read the article

• Java heap size - will this work?

  - by UnCon

  Hi, I try this with NetBeans desktop application template - increasing heapsize (to 512 MiB) of executed .jar file. (I believe that NetBeans uses Singleton app by default - SingleFrameView) Will it work? public static void main(String[] args) { if (args == null) { args = new String[1]; args[0] = "Xmx512m"; } else { String[] tempArgs = new String[args.length+1]; for (int i=0; i<args.length; i++) { tempArgs[i] = args[i]; } tempArgs[tempArgs.length-1] = "Xmx512m"; args = tempArgs; } launch(MyApp.class, args); } }

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• 5.1 surround sound

  - by rocker9455

  Ok, So i've always had trouble with enabling 5.1 in ubuntu. Running 'alsamixer': I have: Master, Heaphones, PCM, Front, Front Mi, Front Mi, Surround, Center All are at 100% Card:HDA Intel Chip:Realtek ALC888 (This is my onboard sound, Its a dell studio, with 7.1 integrated sound) Running "speaker-test -c6 -twav" I only get the front 2 speakers (Right/Left) making any noise. The others make no noise at all. I have no other sound card to use as all my PCI slots are used up. Daemon.conf: ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10

  Read the article

• Nagios plug-in check_snmp receives NO SNMP data from a CISCO Router

  - by Shehryar

  I have tried setting up Nagios on Ubuntu 10.10, successfully installed and can login to web interface, I am however stuck on configuring snmp or I am doing something wrong here, i have followed various sites / nagios wiki to setup configuration (cfg) files. When I check on the web interface, it gives the following error on one of my cisco router: Current Status: UNKNOWN (for 0d 2h 55m 56s) Status Information: SNMP problem - No data received from host CMD: /usr/bin/snmpget -t 1 -r 5 -m RFC1213-MIB -v 1 [authpriv] 192.168.1.1:161 ifOperStatus.1 On the command-line itself, when I type the following, it just sits there waiting and waiting : sudo /usr/local/nagios/libexec/check_snmp -H 192.168.1.1 -C Routers -o sysUpTime.0 When I type the following command : I get an OK /usr/bin/snmpget -v1 192.168.1.1:161 1.3.6.1.2.1.1.5.0 -c "Routers" I have configured SNMP properly on our cisco device as we can collect SNMP Data via two other monitoring tool (SolarWinds and Manage Engine), we are tempted towards Nagios as its opensource. Will be grateful if someone could assist in rectifying this situation and guide me with setting up nagios to monitor Cisco Routers, Switches and a Few Servers. We want to monitor Bandwidth, cpu utilization, uptime and other necessary counters. Will be grateful for your assistance Thanks for reading Shehryar

  Read the article

• 16TB Volumes and SNMP On Windows

  - by John K

  As volumes larger than 16TB became more common, it was recognized that the 32 bit value used to report disk size and usage within the standard "HOST-RESOURCES" MIB in SNMP was not large enough to report the proper disk size. Net-SNMP seems to have addressed this issue by simply manipulating the value of "AllocationUnits" to maintain a 32 bit value for disk utilization (since total disk size/usage is equal to the 32 bit space value times the allocation unit), to allow for the calculation of a volume larger than 8/16TB. Presuming you don't have any reporting interest in the allocation unit, this seems like a fine solution. https://bugzilla.redhat.com/show_bug.cgi?id=654384 Window's built in SNMP service, however, seems to continue to suffer from this error, simply reporting the modulo of the used/assigned disk space, resulting in inaccurate disk size reporting. Is there a way to enable Windows to correctly report disk usage for volumes over 16TB? We attempted to simply install Net-SNMP 5.5 x64 and disable Windows SNMP service entirely, however this unfortunately did not fix our issue. I've seen people in the Cacti community mention simply scripting out a solution. Unfortunately, we're using Observium for quick and basic systems monitoring. If the issue can't be correct on the Window's side, can Observium be made to report custom MIBs?

  Read the article

• Centos 6.2 Fresh 'Basic Server' install networking issues

  - by RWC

  I've had a /29 provisioned on a network port for a server and am trying to at least configure the machine so I can ssh into it. It's Centos 6.2 x64 with the Basic Server install. Currently not able to ping gateway or any address for that matter. For reference: Default Interface: em2 Network ID: 66.*.*.0/29 Gateway: 66.*.*.1 Broadcast: 66.*.*.7 Please see my following configs: /etc/sysconfig/network-scripts/ifcfg-em2 DEVICE=em2 NM_CONTROLLED=yes ONBOOT=yes HWADDR=Not Important TYPE=Ethernet BOOTPROTO=none IPADDR=66.*.*.2 PREFIX=29 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System em2" NETMASK=255.255.255.248 USERCTL=no $: route -n Destination // Gateway // Genmask // Flags // Metric // Ref // Use // Iface 66.*.*.0 0.0.0.0 255.255.255.248 U 0 0 0 em2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 1003 0 em2 0.0.0.0 66.*.*.1 0.0.0.0 UG 0 0 0 em2 $: route Destination // Gateway // Genmask // Flags // Metric // Ref // Use // Iface 66.*.*.0 * 255.255.255.248 U 0 0 0 em2 link-local * 255.255.0.0 U 0 1003 0 em2 default 66.*.*.1 0.0.0.0 UG 0 0 0 em2 $: cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=excalibur.domain.com GATEWAY=66.*.*.1 Keep in mind that I cannot even currently ping the gateway which is quite confusing for me. My /etc/hosts are configured correctly with the *.2 address. I'm not concerned with getting all of the addresses on the /29 up and running yet, just one so I can at least ssh in. Thanks! Edit: Adding in ifconfig. $: ifconfig em2 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX inet addr:66.*.*.2 Bcat:66.*.*.7 Mask:255.255.255.248 inet6 addr: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5536 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2599469 (2.4 MiB) TX bytes: 748 (748.0 b) Interrupt:48 Memory:dc000000-dc012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:34 errors:0 etc etc

  Read the article

• Simulate SNMP traps to test surveillance

  - by jishi

  I'm trying to use Net-SNMP on Windows to emulate a trap that should trigger an alarm on our surveillance system. This is the setup: Windows 7 client that sends the trap Net-SNMP as software for sending the trap Linux with Adventnet ManageEngine OpManager as NMS (not relevant) This is what I'm trying to accomplish send trap with OID .1.3.6.1.4.1.5089.1.0.1 (according to the MIB I have loaded into my NMS) and just some sort of message into it to see if I can get any alarm in my NMS. I can see that I actually send a trap in my firewall, but I have no idea what it contains. This is my attempt so far: snmptrap.exe -v 2c -c xxxxxxx 192.168.100.65 '' 6 0 .1.3.6.1.4.1.5089.1.0.1 s "123456" However, I can't seem to find any reasonable documentation with examples for snmptrap. Basically, I need to know what: '' <- why do I need this? I can omit it and it will still send a trap 6 <- Enterprise gneric trap, I assume. Is this correct? 0 <- I have no idea, I need some sort of value for this .1.3.6.1.4.1.5089.1.0.1 <- the enterprise specific OID I assume, should this be followed by some more numbers s <- indicates string "123456" <- just a random test-string... This doesn't make much sense to me, and if anyone can shed some light on this I would be very grateful.

  Read the article

• Git fails to push with error 'out of memory'

  - by jwir3

  I'm using gitosis on a server that has a low amount of memory, specifically around 512 MB. When I try to push a large folder (happens to be a backup from an android phone), I get: me@corellia:~/Configs/$ git push origin master Counting objects: 18, done. Delta compression using up to 8 threads. Compressing objects: 100% (14/14), done. fatal: Out of memory, malloc failed MiB | 685 KiB/s error: pack-objects died of signal 13 error: failed to push some refs to 'git@dagobah:Configs' I've been searching the web, and notably found: http://www.mail-archive.com/[email protected]/msg01747.html as well as http://git.661346.n2.nabble.com/Out-of-memory-error-during-git-push-td5443705.html but these don't seem to help me for two reasons: 1) I am not actually out of memory when I push. When I run 'top' during the push, I get: 24262 git 18 0 16204 6084 1096 S 2 1.2 0:00.12 git-unpack-obje Also, during the push if I run /head/meminfo, I get: MemTotal: 524288 kB MemFree: 289408 kB Buffers: 0 kB Cached: 0 kB SwapCached: 0 kB Active: 0 kB Inactive: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 524288 kB So, it seems that I have enough memory free, but it's actually still failing, and I'm not enough of a git guru to figure out what is happening. I would appreciate it if someone could give me a hand here and tell me what could be causing this problem, and what I can do to solve it. Thanks! EDIT: The output of running the ulimit -a command: scottj@dagobah:~$ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 204800 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 204800 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

  Read the article

• Cacti is ignoring hash marks in interface aliases

  - by Matt Simmons

  I'm attempting to set up Cacti to monitor a router's interfaces, and I'm having trouble getting the graph templates to show the information that I'd like. Our interface configuration looks like this: interface GigabitEthernet3/6 description WalljackNumber # Server info no ip address no shutdown switchport switchport access vlan 116 switchport mode access ip dhcp snooping trust spanning-tree portfast The "Server Info" string is really just the machine name, and a short relevant description, such as "PolarSprings vmnic2". The important part appears to be that it follows the hashmark. When I run snmpwalk, I get the proper output: IF-MIB::ifAlias.230 = STRING: WalljackNumber # Server info But in Cacti, when I go into the graph templates and set the title to this: |host_description| - Traffic - |query_ifName| (|query_ifAlias|) All that shows up in the graph is: switchname - Traffic - Gi3/6 (WalljackNumber #) Which strikes me as a little weird. What I suppose MAY be happening is that somewhere in the cacti stream, it's interpreting # as being a comment and stripping everything after, but I'm not sure. I was hoping someone could tell me that this was a known documented behavior, or that I could change it in a setting that I wasn't aware of. The alternative answer is to change the delimiter from # to something else, but I've got over a thousand lit switchports on an old college infrastructure, and I'm not sure what else might be relying on them.

  Read the article

• Cannot properly read files on the local server

  - by Andrew Bestic

  I'm running a RedHat 6.2 Amazon EC2 instance using stock Apache and IUS PHP53u+MySQL (+mbstring, +mysqli, +mcrypt), and phpMyAdmin from git. All configuration is near-vanilla, assuming the described installation procedure. I've been trying to import SQL files into the database using phpMyAdmin to read them from a directory on my server. phpMyAdmin lists the files fine in the drop down, but returns a "File could not be read" error when actually trying to import. Furthermore, when trying to execute file_get_contents(); on the file, it also returns a "failed to open stream: Permission denied" error. In fact, when my brother was attempting to import the SQL files using MySQL "SOURCE" as an authenticated MySQL user with ALL PRIVILEGES, he was getting an error reading the file. It seems that we are unable to read/import these files with ANY method other than root under SSH (although I can't say I've tried every possible method). I have never had this issue under regular CentOS (5, 6, 6.2) installations with the same LAMP stack configuration. Some things I've tried after searching Google and StackExchange: CHMOD 0777 both directory and files, CHOWN root, apache (only two users I can think of that PHP would use), Importing SQL files with total size under both upload_max_filesize and post_max_size, PHP open_basedir commented out, or = "/var/www" (my sites are using Apache VirtualHosts within that directory, and all the SQL files are deep within that directory), PHP safe mode is OFF (it was never ON) At the moment I have solved this issue with the smaller files by using the FILE UPLOAD method directly to phpMyAdmin, but this will not be suitable for uploading my 200+ MiB SQL files as I don't have a stable Internet connection. Any light you could shed on this situation would be greatly appreciated. I'm fair with Linux, and for the things that do stump me, Google usually has an answer. Not this time, though!

  Read the article

< Previous Page | 3 4 5 6 7 8 9  | Next Page >