Search Results

Search found 1264 results on 51 pages for 'mini displayport'.

Page 7/51 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Mac Mini server (10.6) behind router with FQDN hostname

  - by thechriskelley

  I have a Mac Mini running Mac OS 10.6.6 Server that will be part of a local network, and a static IP from my ISP. I'd like to set up DNS for the Mini with a FQDN as the hostname (example.com) properly. The Mini is behind a router (Apple Airport Extreme) and is given a private, static IP address. I can't assign it the public static IP directly because it's behind a router with DHCP/NAT for other machines on the local net. My end goal here is for services to resolve to the server properly from outside and inside the local network to users via example.com (and subdomains like mail.example.com, www.example.com), which will point to the public static IP assigned to the router. Will DNS work/resolve properly (for mail services and other subdomains) if it has a private ip address, but the necessary services are forwarded properly through NAT? I'm open to any (hopefully better) suggestions, as my current setup doesn't seem like it's the best way. Currently, more hardware or another public static IP is not possible. With the current setup, it seems as though one static IP is not necessary anyway. Thanks in advance for any insight.

  Read the article

• Can T520+Bumblebee run an external monitor via DisplayPort?

  - by Fen

  Using 64-bit Ubuntu 11.10 and integrated (Intel) graphics, I can run the 1600x900 laptop display plus a 1600x1200 external monitor connected to the VGA adapter. But my external monitor is 1920x1200 so I have black stripes on each side. I believe the resolution is limited like this as the maximum resolution available from the Intel GPU is 2560x1600 = 4,096,000 pixels and I'm asking for a 3520x1200 = 4,224,000 display (with 1200x300 lost above the laptop screen). At 3200x1200 = 3,840,000 pixels, the Intel GPU seems happy. Under Windows, the same limit exists when using the VGA adapter, but if I turn Optimus on then I can connect the external monitor to the DisplayPort and get its full resolution and an extended desktop. I've seen that Bumblebee can run apps on the DisplayPort using the 'optirun' command. My question is: can Bumblebee run the DisplayPort in concert with the Intel card running the laptop screen creating a large virtual desktop (as on Windows)? If so, are there any pointers to how to do this? I tried once, failed, and dropped back to Integrated Graphics (and black stripes) as I could find no reports of this configuration working.

  Read the article

• Open Safari from within Opera Mini on the iPhone

  - by Ican Zilb

  Now that Opera Mini is becoming so popular in the App store I want to effectively warn my web site visitors that the rendition they see in Opera Mini is far from what I meant them to see and redirect them to my page in Mobile Safari, so they can enjoy HTML5 and CSS3. I've been banging my head around that task all day long, but I can't seem to find a solution. My hope lies in the custom URL schemes, but seems Opera Mini handles all schemes which usually Safari does. Would be great if there's a scheme like safari://www.domain.com which opens ONLY in Safari, so I can redirect the visitors to it. Does anybody know a solution to that problem? --edit Just to make myself clear - browser detection is not the problem (I'm doing Javascript for 13 years now) the question is if there's a way to invoke the Safari app on the iPhone from within a web page which is being viewed in Opera Mini.

  Read the article

• How to delete the history and cache in Opera Mobile (10.1)

  - by Mathias Lin

  I run Opera Mobile 10.1 on Android. My device is rooted. How can I clear the history and cache of the browser via shell? As su, removing /data/data/com.opera.browser/opera/profiles/smartphone/cookies4.dat /data/data/com.opera.browser/opera/profiles/smartphone/cache /data/data/com.opera.browser/opera/profiles/smartphone/cacheO and a /system/xbin/busybox killall -9 com.opera.browser afterwards doesn't seem to do the job. Afterwards, bookmarks etc. are still there. In Opera Mini I found it easy to just delete /data/data/com.opera.mini.android/cache/webviewCache /data/data/com.opera.mini.android/databases but unfortunately, Opera Mini in it's current version has a bug and doesn't work on most devices.

  Read the article

• Mac does not recognize wide screen

  - by DUKE

  I am using Mac OS X Lion 10.7.4 on my Mac mini, with Samsung monitor with default resolution 1360 x 768. My Mac mini is connected to Samsung VGA port by Apple mini port to VGA adapter. When starting, my Mac does not recognize the wide screen resolution and always starts in a 4:3 mode, (but it shows 1360x768 as the resolution in the settings). I have to do one of the following actions to bring my Mac to the wide screen resolution: (1) Changing to some other resolution and bring back to the default resolution. (2) Unplug the Apple mini port to VGA adapter and re-connect again. (3) Put the machine to sleep and wake it up again. I am using Ubuntu 12.04, (in a different partition) in the same hardware, but Ubuntu is perfectly recognizing the display.

  Read the article

• Are Mac Minis suitable for a proper desktop computer?

  - by alex

  I've read about a lot of people using their Mac Minis as a file server, or media centre or something similar. Does the mini function alright as a standard desktop PC? The Mac will be used primarily for web development, that is, it will need to run Coda, Photoshop, possible Firefox and Safari at the same time. So it will need suitable performance. Or am I better off getting an iMac? I though the mini looked like a good option because: cheaper I already have a keyboard, mouse and 24" monitor I could use a KVM between the mini and PC Also, does the mini support multiple monitors? Thanks

  Read the article

• Second display freaks out when waking from sleep

  - by inkedmn

  I have two laptops, an older white MacBook and a brand new Macbook Pro. When either computer is on my desk, I connect it to a second, widescreen display (Acer, a couple years old, uses DVI). The Macbook connects via mini DVI and the MBP connects via mini displayport. When the Macbook is connected and everything goes to sleep, I'm able to wake the machine and both displays in the normal way and everything is fine. Sometimes, when waking the MBP, the laptop and primary display are fine, but the second display shows a bunch of static. If I restart the display, everything's fine. This probably happens 70% of the time when the MBP goes to sleep while connected to this display. Any idea what could be causing this?

  Read the article

• Mac Mini Wake on Lan

  - by ILMV

  My Mac Mini has a setting in the Energy Saver category called Wake for Ethernet network access. Now the way I read this option is that any network access to the Mac whilst it is asleep will wake it up, but it doesn't. I have read that I have to send it the magic packet to wake it up, but what I really want to do is be able to simply attempt to access the Mini over the network and it wake up on demand without sending a magic packet. Can this be done? If it helps I am using a Netgear router.

  Read the article

• Mac OSX Server - Mac Mini to XServe Migration

  - by notpeter

  If I build out a Mac OSX Server install on a Mac Mini and then when it's ready for production I image the disks to an XServe, is there any reason the resulting system won't just work? Assuming I'm able to keep the same IP address are there any other issues I should be aware of? I'll be running minimal services, just AFP, SMB and Open Directory. TMI: My Intel XServe is full of cruft. Was originally a G4 XServe running 10.3, upgraded to 10.4 then migrated to 10.5 on the Intel XServe. I'd like a clean start, but can't spare the XServe downtime while I build out the install, can I just use a Mac Mini for dev and then switch to the XServe for production.

  Read the article

• Mac Mini 1.66 no sound on Windows 7

  - by Steph

  I've tried everything I could to get the sound working. I've tried to install the drivers from the Snow Leopard disk, then I went and got the latest RealTek drivers from the RealTek website. Then I read that old Mac mini's could have an integrated Cirrus chip, and I tried to grab the latest driver from the website, and it appeared to install, but nothing. There's also nothing listed under Sound and ... in the Device Manager. I've tried to manually include a legacy driver, which worked for RealTek but not for the Cirrus driver. Of course it said there was no RealTek hardware install, which makes me think it's a Cirrus chip. Any further suggestions or thoughts would be really appreciated. This is a Mac Mini 1.66. I'm also not sure how to be able to detect what card is integrated into the system, so that would be helpful too (remembering that there's no driver installed). Even just to get the chip type would be great to confirm.

  Read the article

• Can I turn my Mac Mini into a Wi-Fi Hotspot without additional tool

  - by user262325

  Hello everyone I have an app need to test via wifi. I just wonder if there is a way to turn my Mac Mini into a Wi-Fi Hotspot without additional tool. I try to setup airport new network name is"mymacmini'. My iPod Touch also can recognize the network "mymacmini". I set my iPod wifi as "mymacmini" But if I try to connect to Internet, Safari always reports failure and connnection with Wifi. I hope to know if I need purchase a wireless router for MAc Mini or there are something wrong I did above? Thanks interdev

  Read the article

• Mini-jack problem with Sony Vaio (running XP)

  - by qftme

  I have a five year old Sony Vaio laptop (vgn-fw31m) that has had impact damage to the audio-output mini-jack for about the last year or so. In a recent discussion with my brother, we wondered whether it would be possible to write a program that would enable windows to use the microphone mini-jack input as the audio-output? As I currently use this laptop for work I am not keen to risk pulling it apart in order to replace the components comprising the audio-out. I therefore 'hope' that a programming solution exists. I would really appreciate any advice on this and eagerly await your response. Kind regards, qftme :)

  Read the article

• xrandr doesn’t detect display ports

  - by Psyhister

  I have a ThinkPad T510 laptop with Gentoo Linux installed on it and I can’t manage to get VGA and DisplayPort working. xrandr -q won’t show them, so I’m guessing, that there’s a problem with my kernel configuration, but I wasn’t able to find the options responsible for these ports. Here’s the output from xrandr -q: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 175, current 1366 x 768, maximum 1366 x 768 default connected 1366x768+0+0 0mm x 0mm 1366x768 50.0* 51.0 52.0 1024x768 53.0 54.0 832x624 55.0 800x600 56.0 57.0 58.0 59.0 60.0 720x400 61.0 700x525 62.0 640x512 63.0 64.0 640x480 65.0 66.0 67.0 68.0 69.0 640x400 70.0 640x350 71.0 576x432 72.0 512x384 73.0 74.0 75.0 76.0 77.0 416x312 78.0 400x300 79.0 80.0 81.0 82.0 83.0 360x200 84.0 320x240 85.0 86.0 87.0 88.0 320x200 89.0 320x175 90.0 Can anyone help me figure out what the problem is and how to get the video connections to work?

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by andybaird

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

• Graphics card for dual 2560 x 1440 output

  - by Bender

  As the title suggests I want to power two 2560 x 1440 monitors from one graphics card. I am just about to send my second graphics card back to Amazon, so before I purchase a 3rd incorrect card I thought I should get some advice. My latest card has dual DL-DVI output but only supports 2560 x 1440 on one output, the other maxes out at 1920 x 1080. Can graphics cards with two Dual Link DVI adapters (or alternately, one Dual Link DVI and one DisplayPort support the a full 2560 x 1440 on both monitors, or does that depend on the graphics hardware and not only the connectors?

  Read the article

• Origin of display connector numbers in XServer (e.g. HDMI1, HDMI2, DP1)

  - by Andreas N

  a custom mainboard has a DVI and a DisplayPort connector on the board. Currently, everything that is connected at DVI will be named "HDMI2" in XServer. I can see that by calling the "xrandr" tool (in Ubuntu Trusty Tahr). A display connected to the DP connector will be named "DP1" or "HDMI1", if I use a DP-to-DVI adapter. We are now testing a slightly upgraded board version, which has a newer CPU (Intel J1800, Baytrail) among other things and the position of the DVI and DP connectors are switched. Also, everything at the DVI port is called "HDMI1" and something connected to the DP port gets "DP2" or "HDMI2". Q: What causes these numbers to be produced in this manner and where (probably in the kernel) is it happening? I suspect the cause to be hardware related. Specifically, at which CPU pins the connector pins are routed and attached to. Q: Would it be possible to influence this numbering scheme in order to retain the previous numbering behaviour?

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by ajbdev

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

• Two monitors with Mac Mini - one displays black despite receiving a signal

  - by alex

  My Mac Mini outputs to my two new monitors - Dell U2311Hs. The LED on the bezel displays blue when receiving a signal, or yellow otherwise. Both screens are displaying blue. It also seems my Mini can see both of them... However, one of them is black. It just displays black, but appears to be receiving a signal (when I turn the Mac off, it then displays No Signal). To make things weirder, on startup, the boot up (white with Apple logo) appears on the right monitor (the one that now displays black). Occasionally, it flickers up on the black screen for 1 second. I have tried Detect Displays. It appears to do nothing. I'm also running a dual monitor KVM. Video connections are DVI-D. How can I fix this situation? Thanks. Update This is the weirdest thing - I used the DVI-D cable that came with the KVM and it seems to have fixed it - I didn't both because it looks identical to any other DVI cable (in form an pin out). So, I will accept an answer if someone can tell me what may be the difference in these cables?

  Read the article

• Producing Mini Dumps for _caught_ SEH exceptions in mixed code DLL

  - by Assaf Lavie

  I'm trying to use code similar to clrdump to create mini dumps in my managed process. This managed process invokes C++/CLI code which invokes some native C++ static lib code, wherein SEH exceptions may be thrown (e.g. the occasional access violation). C# WinForms -> C++/CLI DLL -> Static C++ Lib -> ACCESS VIOLATION Our policy is to produce mini dumps for all SEH exceptions (caught & uncaught) and then translate them to C++ exceptions to be handled by application code. This works for purely native processes just fine; but when the application is a C# application - not so much. The only way I see to produce dumps from SEH exceptions in a C# process is to not catch them - and then, as unhandled exceptions, use the Application.ThreadException handler to create a mini dump. The alternative is to let the CLR translate the SEH exception into a .Net exception and catch it (e.g. System.AccessViolationException) - but that would mean no dump is created, and information is lost (stack trace information in Exception isn't as rich as the mini dump). So how can I handle SEH exceptions by both creating a minidump and translating the exception into a .Net exception so that my application may try to recover?

  Read the article

• Windows XP refuses to install on a dell mini 10

  - by Zac

  I have a dell inspiron mini 10. It boots from an external CD-ROM drive and goes through the first part of the windows XP home install with no problem, but on reboot it loses the CD-Rom drive when it goes into sysprep. Any ideas on how to get around this to complete the install?

  Read the article

• Components needed for VPN

  - by Anriëtte Combrink

  Hi there We eventually got our Mac Mini Server. We now want to set up a small Remote Access VPN using this Mac Mini Server. Firstly we are not sure of the components needed additionally to the server to setup this VPN. We currently have the following: 1 Mac Mini Server 1 Firewall Router (Billion 802.11g ADSL2+ router with VPN capabilities [it says so on the box]) 4Mbps ADSL connection (which should have VPN capability enabled by the service provider, or so we heard) We are not sure what else needs to be included to enable our small VPN. Any advice would be really helpful.

  Read the article

• User agent string of Opera Mini on iPhone

  - by nickf

  So hell froze over and Apple accepted Opera Mini into the app store. Does anyone know what the user agent string will be? The documentation says that Opera's template is like this: Opera/9.80 (J2ME/MIDP; Opera Mini/$CLIENT_VERSION/$SERVER_VERSION; U; $LANGUAGE) Presto/$PRESTO_VERSION

  Read the article

• Design a mini script language

  - by radi

  hi , my project this year is to develop a text mining tool (with new features) so we need a mini script language in this tool to add annotation to texts this language should be simple and like lisp grammars (left and right side) . what i need is how to design this language ,i know how to constract the compiler , but how to write language grammars ? , and i want to use some mini open source language or any language bnf please advice me and if there is a language i can use and customize to meet my needs ? thanks

  Read the article

• Firewire hard drive with Leopard install image won't boot from PPC Mac Mini

  - by GregH

  I have a Mac Mini (G4 - 1.25 GHz PowerPC) running osx 10.3.9. I want to upgrade it to 10.5 (Leopard). The problem is that I only have a CD and no DVD. After working through all of these issues, I got myself a firewire hard drive and both a 10.4 and 10.5 image that I could image on to the hard drive. I was able to successfully boot off the firewire drive with the 10.4 image. However, I am not able to boot off the firewire drive with the 10.5 image. When trying to boot under the 10.5 image I specify the firewire drive as the startup drive. However, it just boots to the internal (10.3) drive. Any idea why it won't boot to the 10.5 image?

  Read the article

• Upgrading a PERC h310 to a PERC H710 mini RAID controller on a Dell R620

  - by Gregg Leventhal

  I have an ESXi 5.0 Free license host using an internal Datastore (RAID 5, 5 Disk) that was configured with a Dell PERC h310 RAID controller. The disk performance was very poor, so I upgraded to the PERC H710 Mini. The IT Tech installed the controller and powered the host back on. I had to rescan the controller and the datastore appeared. Should any settings be changed in the RAID BIOS, or should the default settings be sufficient? Is they anything to be aware of when performing this type of upgrade in order to achieve the maximum performance?

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >