Search Results

Search found 970 results on 39 pages for 'nic waller'.

Page 7/39 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Zabbix Server with Multiple NIC (one on different VLAN) - Monitor a host from both NIC?

  - by Joshua Enfield

  Basically we have many of servers configured for internal use only. I want to ensure the internal services are preserved as internal by checking a host using the local subnet (allowed - this checks if services are up and working), and that the internal services are indeed internal (make sure the services are "down" when checking from different subnet (vlan)) Is there an easy way to do this in Zabbix?

  Read the article

• Connectivity issues with dual NIC machine in EC2

  - by Matt Sieker

  I'm trying to get some servers set up in EC2 in a Virtual Private Cloud. To do this, I have two subnets: 10.0.42.0/24 - Public subnet 10.0.83.0/24 - Private subnet To bridge these two, I have a Funtoo instance with a pair of NICs: eth0 10.0.42.10 eth1 10.0.83.10 Which has the following routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.83.0 * 255.255.255.0 U 0 0 0 eth1 10.0.83.0 * 255.255.255.0 U 203 0 0 eth1 10.0.42.0 * 255.255.255.0 U 202 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 10.0.42.1 0.0.0.0 UG 0 0 0 eth0 default 10.0.42.1 0.0.0.0 UG 202 0 0 eth0 An elastic IP is attached to the eth0 interface, and I can connect to it fine remotely. However, I cannot ping anything in the 10.0.83.0 subnet. For now iptables is not set up on the box, so there's no rules that would get in the way (Eventually this will be managed by Shorewall, but I should get basic connectivity done first) Subnet details from the VPC interface: CIDR: 10.0.83.0/24 Destination Target 10.0.0.0/16 local 0.0.0.0/0 [ID of eth1 on NAT box] Network ACL: Default Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY   CIDR: 10.0.83.0/24 VPC: Destination Target 10.0.0.0/16 local 0.0.0.0/0 [Internet Gateway ID] Network ACL: Default (replace) Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY I've been trying to work this out most of the evening, but I'm just stuck. I'm either missing something obvious, or am doing something very wrong. I would think I'd be able to ping from either interface on this box without issue. Hopefully some more pairs of eyes on this configuration will help. EDIT: I am an idiot. After I bothered to install nmap to run some more tests, I discover I can see the ports, and connect to them, pings are just being blocked.

  Read the article

• Stop Cisco AnyConnect from locking down the NIC

  - by Johannes Rössel

  Cisco's VPN crapclients (including the AnyConnect one) have the nasty habit of clobbering all NICs on the system you're using them. The old client had a checkbox in the connection options that allowed you to use other network interfaces while being connected while the AnyConnect client doesn't have any options at all, seemingly. But they both lock down the network interface they are using to connect to the VPN. Since I am forced to use AnyConnect to actually have an internet connection and I like to control a second computer at home via RDP (over the same network interface so far) this doesn't quite work out. With the old client IPv6 still worked just fine, though AnyConnect seems to dislike that as well now. Is there any way to still use the same network interface for LAN access? I actually don't really care about any possible security implications (which might be why Cisco does this) as it's my freaking internet connection and not a secure way of working from home. The trade-off is quite different :-)

  Read the article

• wds 2 NIC dhcp error

  - by Xaver

  i have two network interface controllers on client pc. i have a wds server. when i load from pxe on client computer: 'WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment'. I think my client try get ip adress to network interface controller which not connected to lan. How to avoid this error?

  Read the article

• Linux NIC Bonding Issue (CentOS 4 / RHEL 3)

  - by jinanwow

  I am having an issue with bonding NICs on CentOS 4. It appears the bonding driver does work, but it is stuck in round-robin mode and I am trying to get to active-backup. The current config is: ifcfg-bond0 DEVICE=bond0 IPADDR=192.168.204.18 NETMASK=255.255.255.0 ONBOOT=yes BOOTPROTO=none USERCTL=no TYPE=Bonding BONDING_OPTS="mode=1 miimon=100" ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet MASTER=bond0 SLAVE=yes ifcfg-eth3 DEVICE=eth3 ONBOOT=yes BOOTPROTO=none TYPE=Ethernet MASTER=bond0 SLAVE=yes cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v2.6.3-rh (June 8, 2005) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:17:a4:8f:94:b1 Slave Interface: eth3 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:1b:21:56:b8:69 cat /etc/modprobe.conf alias eth0 tg3 alias eth1 tg3 alias eth3 e1000 alias eth2 e1000 alias bond0 bonding options bond0 mode=1 miimon=100 I have tried moving the bonding information out of the ifcfg-bond0 into the modprobe configuration file. It seems that it is stuck in RR and I am trying to get it into the Active-backup (mode 1) state. Any ideas what would be causing this issue?

  Read the article

• Linux (Ubuntu 12.04) two gateways one nic

  - by David

  I have Ubuntu 12.04 Server edition Two gateways, both on 192.168.0. network, let's make them 192.168.0.1 and 192.168.0.2 I've read you should be able to add second gateway into /etc/network/interfaces, that it will build out all the routing automatically, but I get "duplicate option" error. So if I have one default gateway, let's say 0.1, and a connection comes through from the 0.2 gateway, my understanding is that it still tries to respond through 0.1 gateway. Can we change this behavior?

  Read the article

• Can't find onboard NIC with windows server 2008

  - by Sanarothe

  Hi. I'm trying to setup a windows server, but I can't seem to get it to install ethernet drivers :( motherboard is ms-6743 chipset 82865g/pe/p(intel) The MSI drivers specifically for this motherboard are bad links. Not surprising... MSI is rarely helpful. Sisoft Sandra doesn't see any network devices, and all of my leads to drivers have reported that there is no network adapter to install a driver for. The light is ON on the mobo, the onboard setting in bios is ON and the computer worked just fine with a standard install of windows 7 about a month ago. I don't know what to do :(

  Read the article

• PXE boot from USB NIC

  - by JoelHess

  Is there a USB solution to PXE boot? I want to use ghost or clonezilla or something to image a bunch of units that don't have on board ethernet, and no clear real way to add to it.

  Read the article

• Windows Server - Dual NIC Bandwidth Pooling

  - by tsilb

  I have a Windows Server 2008 machine with dual NICs. Both are plugged into the same switch in a typical one-switch, one-gateway home network. This server is used almost exclusively for inbound connections. It hosts a web server (IIS 6), SQL server, and file server (via LAN UNC paths and mapped drives). How do I make best use of inbound bandwidth across both NICs? For example, if I connect to it by hostname and one of the interfaces has high traffic, I'd like the new connection to use the other interface.

  Read the article

• VirtualBox "Bridged Adapter" when host NIC is turned off

  - by chris_l

  Hi, I'm running Linux (Debian Etch) in a VirtualBox VM on my MacBook. I usually ssh from my Mac terminal to the guest machine. I also want to access the internet from my guest, so I set up my host's WLAN card (en1) as a bridged adapter for eth0 on the client. This works fine, but when I turn off the WLAN card (e.g. to reduce battery consumption), I'd still like to ssh from my host to the guest. This fails of course, because en1 loses its IP address. Is a bridged adapter the best option for what I want to do? How can I make it work? (A simple "ifconfig en1 add 10.0.0.4" didn't do the trick...) Thanks Chris

  Read the article

• Configure ubuntu 12.10 to share internet through second NIC with subnetwork

  - by Dan Smith

  I have an Ubuntu 12.10 box with 2 NICs. eth0 is connected to my 192.168.1.X network, which is connected to my home router and out to the internet. I want the other interface, eth1,to support 10.0.0.x and allow devices on that network to access the internet through my ubuntu box. I do not need dhcp on the 10.0.0.x network. Here's a schematic: Internet --- home router ---- ubuntu[eth0:192.168.1.x, eth1:10.0.0.x] --- [10.0.0.x device] How do I configure the ubuntu box to share the internet with devices on that subnetwork? Thanks!

  Read the article

• One NIC going to sleep on Centos system

  - by sbleon

  I have two Dell boxes with two ethernet ports a piece. I have a cable directly connecting two of these ports, creating a tiny LAN with 10.3.3.x addresses. The other port on each box is hooked up to a switch and has a DHCP-supplied address to talk to the outside world. I've noticed that when scp'ing large files from one box to the other over the private LAN, the transfers sometimes stall. It appears that any other network activity on either box will cause the transfer to resume. Wake-on-LAN is disabled on all interfaces according to ethtool. What else could be causing these stalled transfers?

  Read the article

• NIC is receiving, but not transmitting at all?

  - by Shtééf

  I'm trying to fix a very strange problem remotely on a machine at a customer site. The machine is a Dell PowerEdge, I believe a 1950 (haven't verified, but the lspci output matches specs I found.) The machine has two similar NICs, identified as Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) by lspci, and using the bnx2 driver. (I suspect these are on-board and on the same controller, which is what I'm accustomed to for this type of machine.) The primary interface eth0 works perfectly, and is in fact how I am ssh'd in. However, the secondary interface eth1 is not transmitting. I can see this in ifconfig output, for example, where the TX field is always 0. However, it is receiving, and tcpdump shows ARP requests coming from the ISP's gateway on the other side. The interface is physically connected to a Siemens BSTU4 modem, configured by the ISP. The link is properly set to 10MBps and full duplex, without negotation, as the ISP requested. A small /30 subnet is configured. For the sake of anonimity, let's say the machine is 3.3.3.2/30, and the ISP's gateway .1. The machine has no firewall settings whatsoever. Even running something like arping -I eth1 3.3.3.1, and running tcpdump alongside, shows no traffic whatsoever being transmitted on the interface. (But the other side keeps steadily sending ARP requests, and that is all that can be seen.) What could be causing this? Here's some output, anonymized, which may hopefully help: $ ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: d Wake-on: d Link detected: yes $ ip link show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:c5:xx:xx:xx brd ff:ff:ff:ff:ff:ff $ ip -4 addr show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 inet 3.3.3.2/30 brd 3.3.3.3 scope global eth1 $ ip -4 route show match 3.3.3.0/30 3.3.3.0/30 dev eth1 proto kernel scope link src 3.3.3.2 default via 10.0.0.5 dev eth0

  Read the article

• Tool for logging NIC link state events.

  - by Alan B

  Intel NICs have a driver option (in Windows) that will log link state events to the system log, so if the network drops out periodically you can determine that fact. Does anyone know of a simple generic solution that does this, in other words one that is not part of the driver from a particular manufacturer? I know there are plenty of 'big iron' network monitoring tools out there but surely there's something really simple that runs as a service in Windows with minimal setup ? TIA

  Read the article

• Routing table with two NIC adapters in libvirt/KVM

  - by lzap

  I created a virtual NAT network (192.168.100.0/24 network) in my libvirt and new guest with two interfaces - one in this network, one as bridged (10.34.1.0/24 network) to the local LAN. The reason for that is I need to have my own virtual network for my DHCP/TFTP/DNS testing and still want to access my guest externally from my LAN. On both networks I have working DHCP, both giving them IP addresses. When I setup NAT port forwarding (e.g. for ssh), I can connect to the eth0 (virtual network), everything is fine. But when I try to access the eth1 via bridged interface, I have no response. I guess I have problem with my routing table - outgoing packets are routed to the virtual NAT network (which has access to the machine I am connecting from - I can ping it). But I am not sure if this setup is correct. I think I need to add something to my routing table. # ifconfig eth0 Link encap:Ethernet HWaddr 52:54:00:B4:A7:5F inet addr:192.168.100.14 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:feb4:a75f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16468 errors:0 dropped:27 overruns:0 frame:0 TX packets:6081 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22066140 (21.0 MiB) TX bytes:483249 (471.9 KiB) Interrupt:11 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 52:54:00:DE:16:21 inet addr:10.34.1.111 Bcast:10.34.1.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:fede:1621/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4911 (4.7 KiB) TX bytes:9 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.34.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1 0.0.0.0 192.168.100.1 0.0.0.0 UG 0 0 0 eth0 Network I am trying to connect from is different than network the hypervisor is connected to: 10.36.0.0. But it is accessible from that network. So I tried to add new route rule: route add -net 10.36.0.0 netmask 255.255.0.0 dev eth1 And it is not working. I thought setting correct interface would be sufficient. What is needed to get my packets coming through?

  Read the article

• Unusable network, packet losses between router and NIC

  - by KáGé

  I have this setup: Gigabyte P35-DS3P motherboard Asus NX1101 PCI network card (the one on the motherboard got fried a few years ago by a power surge) Asus RT-N16 router Windows 7 x64 I think the other specs are irrelevant here, but I'll post them if you say so. Until a week ago everything was fine, but then my network became unusable: websites start loading but timeout before anything would come through (true for the web interface of the router as well), I can't reach the computer from my notebook and Windows' ping utility measures a ~50% packet loss between the computer and the router. Pinging localhost is good. The router works completely fine when wired to my notebook. I also tested different ports on the router, different cables, different router and connecting directly to the modem, but it's still the same. Sometimes it works for a few minutes right after turning on the machine, but then it becomes crap again, but mostly it's useless from the start. I've tried updating the firmware on the router, updating the driver for the network card (after which I started getting BSoDs in every 15 minutes), reinstalling Windows, swapping to Fedora 15 but none of them changed anything. Does this mean that the network card is dying, or could it be something else? If it's the card, what model do you recommend as a replacement? (Could be PCI or PCI-Ex x1) Thanks for your help.

  Read the article

• NIC going to sleep on Ubuntu Server 10.04

  - by user43390

  When I leave my server idle for about 10 minutes the network will stop responding to outside connections. If I get on the server and attempt to use the network(ping google for example) there will be a delay for a few seconds and then it works. After this incoming connections work again until I leave it idle again. Why does this happen and how can I fix it?

  Read the article

• How to send pcap file packets on NIC?

  - by salman

  I have some network traffic captured pcap file and want to send its packets on NIC; is it possible? Is there any application to do this?

  Read the article

• Add IP Address without Plesk

  - by CrackerJack9

  I have an dedicated unmanaged server and added a few IP addresses to it (allocated), and the only information my hosting company has provided is instructions on how to use Plesk to Add IP Addresses. However, one of the first things I did was uninstall Plesk (for numerous reasons). Does anyone know what exactly Plesk does when you "Add IP Address"? Does it just create an alias on the default interface (I currently only have one and the loopback)? I can manage that myself without Plesk, but I was hoping someone might know if there is anything else Plesk does. I also have DHCP Client running (eth0 is static), not sure why my hosting company put that there either, and not sure if they're related.

  Read the article

• Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

  - by cdonner

  I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

  Read the article

• allowing 2 VM's to communicate RED HAT 64 bit

  - by ????? ????????

  My physical PC is running 2 VMs on virtualbox. Both of the VM's are linux 64 bit. I am going through this tutorial: http://www.cyberciti.biz/faq/rhel-centos-fedoracore-linux-network-card-configuration/ in order to expose both of their IP's so that they can speak to each other. Mike Schwager November 25, 2009 at 10:55 pm Whoops! In section 3, you forgot about editing /etc/hosts. I believe RedHat comes complete with the system’s host ip address set up in /etc/hosts. Don’t forget to give it a look. I agree with Mike because after I looked into the /etc/hosts files, it has just default localhost stuff in it. How should I reconfigure the hosts file?

  Read the article

• Intel DriverInstall issue on HP ProLiant server DL580G5

  - by TomTom

  Given: A HP ProLiant server to be used for Hyper-V server (R 2) Problem: The server has a HP NC364T quad port card, which actually is an Intel 1000 Pro adapter. We are stuck getting this adapter properly working. We need to get it working with: 2 trunks of 2 ports each one of them fully vlan "aware" (without filtering anything - so that Hyper-V can do the VLAN filtering). So far we did: Install the server Install latest PSP. Problem here - tool does not work to set up teaming. We tried to install the latest ProWin pack from Intel - the drivers there are a LOT more current (26th of Marrch 2010, 9.13.41.0). The intalled driver (Microsoft) is ancient (march 2009, 9.13.4.10) A driver update fails both on command line (pnputil) as well as the PortLock device manager executable. No informatoin is provided. the ANS toolset can not create teams (fails with error - again, no reason provided), I know of no logs and the event log has no information either. Questions: What are the best drivers to use? How do we actually install them? How can we then set up teaming and how do we set up the VLAN behavior wanted?

  Read the article

• OS X will not register newly installed network adapters

  - by Chris

  I have purchased an Edimax 7318USg and tested it on a Windows machine (works). The installation process for the software for this adapter runs smoothly. However, OS X simply does not recognize new network adapters. When you go to System Preferences/Network, a new network adapter should be present/there should be an alert. This is not the case. Why might this be? Is there a setting I may reset to force the operating system to recognize this? Thanks!

  Read the article

• Teamed network cards on a Proliant Server

  - by Matt

  We have 4 network cards in a Proliant server with Server 2008R2 running Exchange 2010, with 1 card set to a static IP address and the other 3 set to DHCP. I just need some clarification as I have not teamed network cards. Do all the network cards need to have a static IP when I set as a team. The connection that has the static IP is the IP that I need to use for the Server. Is it possible to set the teamed cards to the same static IP or do I have to change the static IP to another IP then use it for the teamed IP? I will be using HP Network Configuration Utility to set this up.

  Read the article

• How to Load Balance 2 Internet Connections on a Windows 7 machine?

  - by Jimmy Chandra

  It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >