Search Results

Search found 1848 results on 74 pages for 'turbo boost'.

Page 7/74 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • boost.asio's socket's recieve/send functions are bad?

    - by the_drow
    Data may be read from or written to a connected TCP socket using the receive(), async_receive(), send() or async_send() member functions. However, as these could result in short writes or reads, an application will typically use the following operations instead: read(), async_read(), write() and async_write(). I don't really understand that remark as read(), async_read(), write() and async_write() can also end up in short writes or reads, right? Why are those functions not the same? Should I use them at all? Can someone clarify that remark for me?

    Read the article

  • upgrading boost version

    - by idimba
    I'm using RHEL 5.3, shipped with gcc 4.1.2 and boost 1.33. So, there's no boost::unorded_map, no make_shared() factory function to create boost::shared_ptr and other features available in newer releases of boost. Is there're a newer version of boost compatible with the version of gcc? If yes, how the upgrade is performed?

    Read the article

  • Handle complex options with Boost's program_options

    - by R S
    I have a program that generates graphs using different multi-level models. Each multi-level model consists of a generation of a smaller seed graph (say, 50 nodes) which can be created from several models (for example - for each possible edge, choose to include it with probability p). After the seed graph generation, the graph is expanded into a larger one (say 1000 nodes), using one of another set of models. In each of the two stages, each model require a different number of parameters. I would like to be have program_options parse the different possible parameters, according to the names of the models. For example, say I have two seed graphs models: SA, which has 1 parameters, and SB, which has two. Also for the expansion part, I have two models: A and B, again with 1 and 2 parameters, respectively. I would like to be able do something like: ./graph_generator --seed=SA 0.1 --expansion=A 0.2 ./graph_generator --seed=SB 0.1 3 --expansion=A 0.2 ./graph_generator --seed=SA 0.1 --expansion=B 10 20 ./graph_generator --seed=SB 0.1 3 --expansion=B 10 20 and have the parameters parsed correctly. Is that even possible?

    Read the article

  • Using boost::random as the RNG for std::random_shuffle

    - by Greg Rogers
    I have a program that uses the mt19937 random number generator from boost::random. I need to do a random_shuffle and want the random numbers generated for this to be from this shared state so that they can be deterministic with respect to the mersenne twister's previously generated numbers. I tried something like this: void foo(std::vector<unsigned> &vec, boost::mt19937 &state) { struct bar { boost::mt19937 &_state; unsigned operator()(unsigned i) { boost::uniform_int<> rng(0, i - 1); return rng(_state); } bar(boost::mt19937 &state) : _state(state) {} } rand(state); std::random_shuffle(vec.begin(), vec.end(), rand); } But i get a template error calling random_shuffle with rand. However this works: unsigned bar(unsigned i) { boost::mt19937 no_state; boost::uniform_int<> rng(0, i - 1); return rng(no_state); } void foo(std::vector<unsigned> &vec, boost::mt19937 &state) { std::random_shuffle(vec.begin(), vec.end(), bar); } Probably because it is an actual function call. But obviously this doesn't keep the state from the original mersenne twister. What gives? Is there any way to do what I'm trying to do without global variables?

    Read the article

  • Intel Core i5-2467m - Turbo Boost not activating?

    - by Trevor Sullivan
    I have a Samsung Series 5 laptop with an Intel Core i5-2467m process @ 1.6Ghz. The processor supports Intel Turbo Boost up to 2.30 Ghz according to the specifications. The i5-2467m is a dual-core process with HyperThreading, so there is a total of four (4) virtual cores in Windows 7 SP1. http://ark.intel.com/products/56858/ I've installed the Intel Turbo Boost Technology Monitor v2.6 to monitor if Turbo Boost is enabled, and set it to "Always On Top." I followed this process to max out the CPU: Open (4x) PowerShell instances Set each instance's affinity to a distinct CPU vCore Ran this code in each instance: while (1 -eq 1) { } Unfortunately, after maxing out all 4 cores, my laptop got hot, but Turbo Boost never kicked in. Any ideas on how to ensure that I'm getting the 2.3Ghz Turbo Boost capability of my laptop?

    Read the article

  • is Boost Library's weighted median broken?

    - by user624188
    I confess that I am no expert in C++. I am looking for a fast way to compute weighted median, which Boost seemed to have. But it seems I am not able to make it work. #include <iostream> #include <boost/accumulators/accumulators.hpp> #include <boost/accumulators/statistics/stats.hpp> #include <boost/accumulators/statistics/median.hpp> #include <boost/accumulators/statistics/weighted_median.hpp> using namespace boost::accumulators; int main() { // Define an accumulator set accumulator_set<double, stats<tag::median > > acc1; accumulator_set<double, stats<tag::median >, float> acc2; // push in some data ... acc1(0.1); acc1(0.2); acc1(0.3); acc1(0.4); acc1(0.5); acc1(0.6); acc2(0.1, weight=0.); acc2(0.2, weight=0.); acc2(0.3, weight=0.); acc2(0.4, weight=1.); acc2(0.5, weight=1.); acc2(0.6, weight=1.); // Display the results ... std::cout << " Median: " << median(acc1) << std::endl; std::cout << "Weighted Median: " << median(acc2) << std::endl; return 0; } produces the following output, which is clearly wrong. Median: 0.3 Weighted Median: 0.3 Am I doing something wrong? Any help will be greatly appreciated. * however, the weighted sum works correctly * @glowcoder: The weighted sum works perfectly fine like this. #include <iostream> #include <boost/accumulators/accumulators.hpp> #include <boost/accumulators/statistics/stats.hpp> #include <boost/accumulators/statistics/sum.hpp> #include <boost/accumulators/statistics/weighted_sum.hpp> using namespace boost::accumulators; int main() { // Define an accumulator set accumulator_set<double, stats<tag::sum > > acc1; accumulator_set<double, stats<tag::sum >, float> acc2; // accumulator_set<double, stats<tag::median >, float> acc2; // push in some data ... acc1(0.1); acc1(0.2); acc1(0.3); acc1(0.4); acc1(0.5); acc1(0.6); acc2(0.1, weight=0.); acc2(0.2, weight=0.); acc2(0.3, weight=0.); acc2(0.4, weight=1.); acc2(0.5, weight=1.); acc2(0.6, weight=1.); // Display the results ... std::cout << " Median: " << sum(acc1) << std::endl; std::cout << "Weighted Median: " << sum(acc2) << std::endl; return 0; } and the result is Sum: 2.1 Weighted Sum: 1.5

    Read the article

  • trying to build Boost MPI, but the lib files are not created. What's going on?

    - by unknownthreat
    I am trying to run a program with Boost MPI, but the thing is I don't have the .lib. So I try to create one by following the instruction at http://www.boost.org/doc/libs/1_43_0/doc/html/mpi/getting_started.html#mpi.config The instruction says "For many users using LAM/MPI, MPICH, or OpenMPI, configuration is almost automatic", I got myself OpenMPI in C:\, but I didn't do anything more with it. Do we need to do anything with it? Beside that, another statement from the instruction: "If you don't already have a file user-config.jam in your home directory, copy tools/build/v2/user-config.jam there." Well, I simply do what it says. I got myself "user-config.jam" in C:\boost_1_43_0 along with "using mpi ;" into the file. Next, this is what I've done: bjam --with-mpi C:\boost_1_43_0>bjam --with-mpi WARNING: No python installation configured and autoconfiguration failed. See http://www.boost.org/libs/python/doc/building.html for configuration instructions or pass --without-python to suppress this message and silently skip all Boost.Python targets Building the Boost C++ Libraries. warning: skipping optional Message Passing Interface (MPI) library. note: to enable MPI support, add "using mpi ;" to user-config.jam. note: to suppress this message, pass "--without-mpi" to bjam. note: otherwise, you can safely ignore this message. warning: Unable to construct ./stage-unversioned warning: Unable to construct ./stage-unversioned Component configuration: - date_time : not building - filesystem : not building - graph : not building - graph_parallel : not building - iostreams : not building - math : not building - mpi : building - program_options : not building - python : not building - random : not building - regex : not building - serialization : not building - signals : not building - system : not building - test : not building - thread : not building - wave : not building ...found 1 target... The Boost C++ Libraries were successfully built! The following directory should be added to compiler include paths: C:\boost_1_43_0 The following directory should be added to linker library paths: C:\boost_1_43_0\stage\lib C:\boost_1_43_0> I see that there are many libs in C:\boost_1_43_0\stage\lib, but I see no trace of libboost_mpi-vc100-mt-1_43.lib or libboost_mpi-vc100-mt-gd-1_43.lib at all. These are the libraries required for linking in mpi applications. What could possibly gone wrong when libraries are not being built?

    Read the article

  • Do newer versions of BJam support backwards compatibility with older versions of Boost?

    - by cmmacphe
    I'm trying to build version 1.35 of Boost with the newest version of bjam that is bundled with version 1.42 Boost. Will this adversely affect the results of the build? Is this even possible? The reason I'm trying to do this is because the newest version of BJam has support for command line options that are not included in the older version of BJam that comes bundled with 1.35 of boost.

    Read the article

  • Can't figure out where race condition is occuring

    - by Nik
    I'm using Valgrind --tool=drd to check my application that uses Boost::thread. Basically, the application populates a set of "Book" values with "Kehai" values based on inputs through a socket connection. On a seperate thread, a user can connect and get the books send to them. Its fairly simple, so i figured using a boost::mutex::scoped_lock on the location that serializes the book and the location that clears out the book data should be suffice to prevent any race conditions. Here is the code: void Book::clear() { boost::mutex::scoped_lock lock(dataMutex); for(int i =NUM_KEHAI-1; i >= 0; --i) { bid[i].clear(); ask[i].clear(); } } int Book::copyChangedKehaiToString(char* dst) const { boost::mutex::scoped_lock lock(dataMutex); sprintf(dst, "%-4s%-13s",market.c_str(),meigara.c_str()); int loc = 17; for(int i = 0; i < Book::NUM_KEHAI; ++i) { if(ask[i].changed > 0) { sprintf(dst+loc,"A%i%-21s%-21s%-21s%-8s%-4s",i,ask[i].price.c_str(),ask[i].volume.c_str(),ask[i].number.c_str(),ask[i].postTime.c_str(),ask[i].status.c_str()); loc += 77; } } for(int i = 0; i < Book::NUM_KEHAI; ++i) { if(bid[i].changed > 0) { sprintf(dst+loc,"B%i%-21s%-21s%-21s%-8s%-4s",i,bid[i].price.c_str(),bid[i].volume.c_str(),bid[i].number.c_str(),bid[i].postTime.c_str(),bid[i].status.c_str()); loc += 77; } } return loc; } The clear() function and the copyChangedKehaiToString() function are called in the datagetting thread and data sending thread,respectively. Also, as a note, the class Book: struct Book { private: Book(const Book&); Book& operator=(const Book&); public: static const int NUM_KEHAI=10; struct Kehai; friend struct Book::Kehai; struct Kehai { private: Kehai& operator=(const Kehai&); public: std::string price; std::string volume; std::string number; std::string postTime; std::string status; int changed; Kehai(); void copyFrom(const Kehai& other); Kehai(const Kehai& other); inline void clear() { price.assign(""); volume.assign(""); number.assign(""); postTime.assign(""); status.assign(""); changed = -1; } }; std::vector<Kehai> bid; std::vector<Kehai> ask; tm recTime; mutable boost::mutex dataMutex; Book(); void clear(); int copyChangedKehaiToString(char * dst) const; }; When using valgrind --tool=drd, i get race condition errors such as the one below: ==26330== Conflicting store by thread 1 at 0x0658fbb0 size 4 ==26330== at 0x653AE68: std::string::_M_mutate(unsigned int, unsigned int, unsigned int) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x653AFC9: std::string::_M_replace_safe(unsigned int, unsigned int, char const*, unsigned int) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x653B064: std::string::assign(char const*, unsigned int) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x653B134: std::string::assign(char const*) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x8055D64: Book::Kehai::clear() (Book.h:50) ==26330== by 0x8094A29: Book::clear() (Book.cpp:78) ==26330== by 0x808537E: RealKernel::start() (RealKernel.cpp:86) ==26330== by 0x804D15A: main (main.cpp:164) ==26330== Allocation context: BSS section of /usr/lib/libstdc++.so.6.0.8 ==26330== Other segment start (thread 2) ==26330== at 0x400BB59: pthread_mutex_unlock (drd_pthread_intercepts.c:633) ==26330== by 0xC59565: pthread_mutex_unlock (in /lib/libc-2.5.so) ==26330== by 0x805477C: boost::mutex::unlock() (mutex.hpp:56) ==26330== by 0x80547C9: boost::unique_lock<boost::mutex>::~unique_lock() (locks.hpp:340) ==26330== by 0x80949BA: Book::copyChangedKehaiToString(char*) const (Book.cpp:134) ==26330== by 0x80937EE: BookSerializer::serializeBook(Book const&, std::string const&) (BookSerializer.cpp:41) ==26330== by 0x8092D05: BookSnapshotManager::getSnaphotDataList() (BookSnapshotManager.cpp:72) ==26330== by 0x8088179: SnapshotServer::getDataList() (SnapshotServer.cpp:246) ==26330== by 0x808870F: SnapshotServer::run() (SnapshotServer.cpp:183) ==26330== by 0x808BAF5: boost::_mfi::mf0<void, RealThread>::operator()(RealThread*) const (mem_fn_template.hpp:49) ==26330== by 0x808BB4D: void boost::_bi::list1<boost::_bi::value<RealThread*> >::operator()<boost::_mfi::mf0<void, RealThread>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, RealThread>&, boost::_bi::list0&, int) (bind.hpp:253) ==26330== by 0x808BB90: boost::_bi::bind_t<void, boost::_mfi::mf0<void, RealThread>, boost::_bi::list1<boost::_bi::value<RealThread*> > >::operator()() (bind_template.hpp:20) ==26330== Other segment end (thread 2) ==26330== at 0x400B62A: pthread_mutex_lock (drd_pthread_intercepts.c:580) ==26330== by 0xC59535: pthread_mutex_lock (in /lib/libc-2.5.so) ==26330== by 0x80546B8: boost::mutex::lock() (mutex.hpp:51) ==26330== by 0x805473B: boost::unique_lock<boost::mutex>::lock() (locks.hpp:349) ==26330== by 0x8054769: boost::unique_lock<boost::mutex>::unique_lock(boost::mutex&) (locks.hpp:227) ==26330== by 0x8094711: Book::copyChangedKehaiToString(char*) const (Book.cpp:113) ==26330== by 0x80937EE: BookSerializer::serializeBook(Book const&, std::string const&) (BookSerializer.cpp:41) ==26330== by 0x808870F: SnapshotServer::run() (SnapshotServer.cpp:183) ==26330== by 0x808BAF5: boost::_mfi::mf0<void, RealThread>::operator()(RealThread*) const (mem_fn_template.hpp:49) ==26330== by 0x808BB4D: void boost::_bi::list1<boost::_bi::value<RealThread*> >::operator()<boost::_mfi::mf0<void, RealThread>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, RealThread>&, boost::_bi::list0&, int) (bind.hpp:253) For the life of me, i can't figure out where the race condition is. As far as I can tell, clearing the kehai is done only after having taken the mutex, and the same holds true with copying it to a string. Does anyone have any ideas what could be causing this, or where I should look? Thank you kindly.

    Read the article

  • Boost::Asio - Remove the "null"-character in the end of tcp packets.

    - by shump
    I'm trying to make a simple msn client mostly for fun but also for educational purposes. And I started to try some tcp package sending and receiving using Boost Asio as I want cross-platform support. I have managed to send a "VER"-command and receive it's response. However after I send the following "CVR"-command, Asio casts an "End of file"-error. After some further researching I found by packet sniffing that my tcp packets to the messenger server got an extra "null"-character (Ascii code: 00) at the end of the message. This means that my VER-command gets an extra character in the end which I don't think the messenger server like and therefore shuts down the connection when I try to read the CVR response. This is how my package looks when sniffing it, (it's Payload): (Hex:) 56 45 52 20 31 20 4d 53 4e 50 31 35 20 43 56 52 30 0a 0a 00 (Char:) VER 1 MSNP15 CVR 0... and this is how Adium(chat client for OS X)'s package looks: (Hex:) 56 45 52 20 31 20 4d 53 4e 50 31 35 20 43 56 52 30 0d 0a (Char:) VER 1 MSNP15 CVR 0.. So my question is if there is any way to remove the null-character in the end of each package, of if I've misunderstood something and used Asio in a wrong way. My write function (slightly edited) looks lite this: int sendVERMessage() { boost::system::error_code ignored_error; char sendBuf[] = "VER 1 MSNP15 CVR0\r\n"; boost::asio::write(socket, boost::asio::buffer(sendBuf), boost::asio::transfer_all(), ignored_error); if(ignored_error) { cout << "Failed to send to host!" << endl; return 1; } cout << "VER message sent!" << endl; return 0; } And here's the main documentation on the msn protocol I'm using. Hope I've been clear enough.

    Read the article

  • Turbo C++ to Visual Studio 2010 migration [closed]

    - by BigGenius
    OK, based on my previous questions and your help., I have gone to install Visual Studio Express. But now problem is, the programs which I successfully code at home on Visual Studio don't run on Turbo C++ compiler at school (assuming I type the program instead of exporting code). Is there anything I can do? Also I am just learning basic syntax and data handling, loops, structures, arrays and all. But Visual Studio has auto completion and pretty typing (which may be advantageous) but crap for a beginner getting hold on to language. Sorry, if I have been unclear. But what should I do? This will make me lazy programmer and will reflect in my grades. Is there any other IDE, which I can use, very similar to Turbo C++ and able to run in Windows 7 in fullsreen mode.

    Read the article

  • How do boost operators work?

    - by FredOverflow
    boost::operators automatically defines operators like + based on manual implementations like += which is very useful. To generate those operators for T, one inherits from boost::operators<T> as shown by the boost example: class MyInt : boost::operators<MyInt> I am familiar with the CRTP pattern, but I fail to see how it works here. Specifically, I am not really inheriting any facilities since the operators aren't members. boost::operators seems to be completely empty, but I'm not very good at reading boost source code. Could anyone explain how this works in detail? Is this mechanism well-known and widely used?

    Read the article

  • Boost Thread Hanging on _endthreadex

    - by FranticPedantic
    I think I am making a simple mistake, but since I noticed there are many boost experts here, I thought I would ask for help. I am trying to use boost threads(1_40) on windows xp. The main program loads a dll, starts the thread like so (note this is not in a class, the static does not mean static to a class but private to the file). static boost::thread network_thread; network_start() { // do network stuff until quit is signaled } DllClass::InitInstance() { network_thread = boost::thread(boost::bind<void>(network_start)); } DllClass::ExitInstance() { //signal quit (which works) //the following code is slightly verbose because I'm trying to figure out what's wrong try { if (network_thread.joinable() ) { network_thread.join(); } else { TRACE("Too late!"); } } catch (boost::thread_interrupted&) { TRACE("NET INTERRUPTED"); } } The problem is that the main thread is hanging on the join, and the network thread is hanging at the end of _endthreadex. What am I misunderstanding?

    Read the article

  • Generating a reasonable ctags database for Boost

    - by Robert S. Barnes
    I'm running Ubuntu 8.04 and I ran the command: $ ctags -R --c++-kinds=+p --fields=+iaS --extra=+q -f ~/.vim/tags/stdlibcpp /usr/include/c++/4.2.4/ to generate a ctags database for the standard C++ library and STL ( libstdc++ ) on my system for use with the OmniCppComplete vim script. This gave me a very reasonable 4MB tags file which seems to work fairly well. However, when I ran the same command against the installed Boost headers: $ ctags -R --c++-kinds=+p --fields=+iaS --extra=+q -f ~/.vim/tags/boost /usr/include/boost/ I ended up with a 1.4 GB tags file! I haven't tried it yet, but that seems likes it's going to be too large to be useful. Is there a way to get a slimmer, more usable tags file for my installed Boost headers? Edit Just as a note, libstdc++ includes TR1, which has allot of Boost libs in it. So there must be something weird going on for libstdc++ to come out with a 4 MB tags file and Boost to end up with a 1.4 GB tags file.

    Read the article

  • Compiling OpenSSL for boost asio for Microsoft Visual Studio 2010

    - by user560106
    I compiled boost with bjam, and then I compiled OpenSSL. Both of them work separately. I set up the links in Visual Studio 10 to point to my OpenSSL library directory. But when I attempt to compile example boost ssl asio programs I get 44 unresolved external linker errors like this one: 1testing.obj : error LNK2019: unresolved external symbol _SSLv23_server_method referenced in function "public: void __thiscall boost::asio::ssl::detail::openssl_context_service::create(struct ssl_ctx_st * &,enum boost::asio::ssl::context_base::method)" (?create@openssl_context_service@detail@ssl@asio@boost@@QAEXAAPAUssl_ctx_st@@W4method@context_base@345@@Z) Can you please give me step-by-step instructions on properly linking OpenSSL to boost? Thank you so much

    Read the article

  • Modelling boost::Lockable with semaphore rather than mutex (previously titled: Unlocking a mutex fr

    - by dan
    I'm using the C++ boost::thread library, which in my case means I'm using pthreads. Officially, a mutex must be unlocked from the same thread which locks it, and I want the effect of being able to lock in one thread and then unlock in another. There are many ways to accomplish this. One possibility would be to write a new mutex class which allows this behavior. For example: class inter_thread_mutex{ bool locked; boost::mutex mx; boost::condition_variable cv; public: void lock(){ boost::unique_lock<boost::mutex> lck(mx); while(locked) cv.wait(lck); locked=true; } void unlock(){ { boost::lock_guard<boost::mutex> lck(mx); if(!locked) error(); locked=false; } cv.notify_one(); } // bool try_lock(); void error(); etc. } I should point out that the above code doesn't guarantee FIFO access, since if one thread calls lock() while another calls unlock(), this first thread may acquire the lock ahead of other threads which are waiting. (Come to think of it, the boost::thread documentation doesn't appear to make any explicit scheduling guarantees for either mutexes or condition variables). But let's just ignore that (and any other bugs) for now. My question is, if I decide to go this route, would I be able to use such a mutex as a model for the boost Lockable concept. For example, would anything go wrong if I use a boost::unique_lock< inter_thread_mutex for RAII-style access, and then pass this lock to boost::condition_variable_any.wait(), etc. On one hand I don't see why not. On the other hand, "I don't see why not" is usually a very bad way of determining whether something will work. The reason I ask is that if it turns out that I have to write wrapper classes for RAII locks and condition variables and whatever else, then I'd rather just find some other way to achieve the same effect. EDIT: The kind of behavior I want is basically as follows. I have an object, and it needs to be locked whenever it is modified. I want to lock the object from one thread, and do some work on it. Then I want to keep the object locked while I tell another worker thread to complete the work. So the first thread can go on and do something else while the worker thread finishes up. When the worker thread gets done, it unlocks the mutex. And I want the transition to be seemless so nobody else can get the mutex lock in between when thread 1 starts the work and thread 2 completes it. Something like inter_thread_mutex seems like it would work, and it would also allow the program to interact with it as if it were an ordinary mutex. So it seems like a clean solution. If there's a better solution, I'd be happy to hear that also. EDIT AGAIN: The reason I need locks to begin with is that there are multiple master threads, and the locks are there to prevent them from accessing shared objects concurrently in invalid ways. So the code already uses loop-level lock-free sequencing of operations at the master thread level. Also, in the original implementation, there were no worker threads, and the mutexes were ordinary kosher mutexes. The inter_thread_thingy came up as an optimization, primarily to improve response time. In many cases, it was sufficient to guarantee that the "first part" of operation A, occurs before the "first part" of operation B. As a dumb example, say I punch object 1 and give it a black eye. Then I tell object 1 to change it's internal structure to reflect all the tissue damage. I don't want to wait around for the tissue damage before I move on to punch object 2. However, I do want the tissue damage to occur as part of the same operation; for example, in the interim, I don't want any other thread to reconfigure the object in such a way that would make tissue damage an invalid operation. (yes, this example is imperfect in many ways, and no I'm not working on a game) So we made the change to a model where ownership of an object can be passed to a worker thread to complete an operation, and it actually works quite nicely; each master thread is able to get a lot more operations done because it doesn't need to wait for them all to complete. And, since the event sequencing at the master thread level is still loop-based, it is easy to write high-level master-thread operations, as they can be based on the assumption that an operation is complete when the corresponding function call returns. Finally, I thought it would be nice to use inter_thread mutex/semaphore thingies using RAII with boost locks to encapsulate the necessary synchronization that is required to make the whole thing work.

    Read the article

  • Boost Regex throwing an error

    - by Srinivasa Varadan
    Hi ALL, I have the following error when I try to compile my code in g+ compiler using eclipse In function `ZSt19__iterator_categoryIPKSsENSt15iterator_traitsIT_E17iterator_categoryERKS3_': C:/Program Files (x86)/mingw/bin/../lib/gcc/mingw32/3.4.5/../../../../include/c++/3.4.5/bits/stl_algobase.h:(.text$_ZN5boost11basic_regexIcNS_12regex_traitsIcNS_16cpp_regex_traitsIcEEEEE6assignEPKcS7_j[boost::basic_regex<char, boost::regex_traits<char, boost::cpp_regex_traits<char> > >::assign(char const*, char const*, unsigned int)]+0x22): undefined reference to `boost::basic_regex<char, boost::regex_traits<char, boost::cpp_regex_traits<char> > >::do_assign(char const*, char const*, unsigned int)' collect2: ld returned 1 exit status Build error occurred, build is stopped All I have done is this statement boost::regex re("\s+"); along with the header #inlucde Could you kindly tell me how to proceed ?

    Read the article

  • Linker Issues with boost::thread under linux using Eclipse and CMake

    - by OcularProgrammer
    I'm in the process of attempting to port some code across from PC to Ubuntu, and am having some issues due to limited experience developing under linux. We use CMake to generate all our build stuff. Under windows I'm making VS2010 projects, and under Linux I'm making Eclipse projects. I've managed to get my OpenCV stuff ported across successfully, but am having major headaches trying to port my threaded boost apps. Just so we're clear, the steps I have followed so-far on a clean Ubuntu 12 installation. (I've done 2 clean re-installs to try and fix potential library cock-ups, now I'm just giving up and asking): Install Eclipse and Eclipse CDT using my package manager Install CMake and CMake Gui using my package manager Install libboost-all-dev using my package manager So-far that's all I've done. I can create the eclipse project using CMake with no errors, so CMake is successfully finding my boost install. When I try and build through eclipse is when I get issues; The app I'm attempting to build uses boost::asio for some UDP I/O and boost::thread to create worker threads for the asio I/O services. I can successfully compile each module, but when I come to link I get spammed with errors such as: /usr/bin/c++ CMakeFiles/RE05DevelopmentDemo.dir/main.cpp.o CMakeFiles/RE05DevelopmentDemo.dir/RE05FusionListener/RE05FusionListener.cpp.o CMakeFiles/RE05DevelopmentDemo.dir/NewEye/NewEye.cpp.o -o RE05DevelopmentDemo -rdynamic -Wl,-Bstatic -lboost_system-mt -lboost_date_time-mt -lboost_regex-mt -lboost_thread-mt -Wl,-Bdynamic /usr/lib/gcc/x86_64-linux-gnu/4.6/../../../../lib/libboost_thread-mt.a(thread.o): In function `void boost::call_once<void (*)()>(boost::once_flag&, void (*)()) [clone .constprop.98]': make[2]: Leaving directory `/home/david/Code/Build/Support/RE05DevDemo' (.text+0xc8): undefined reference to `pthread_key_create' /usr/lib/gcc/x86_64-linux-gnu/4.6/../../../../lib/libboost_thread-mt.a(thread.o): In function `boost::this_thread::interruption_enabled()': (.text+0x540): undefined reference to `pthread_getspecific' make[1]: Leaving directory `/home/david/Code/Build/Support/RE05DevDemo' /usr/lib/gcc/x86_64-linux-gnu/4.6/../../../../lib/libboost_thread-mt.a(thread.o): In function `boost::this_thread::disable_interruption::disable_interruption()': (.text+0x570): undefined reference to `pthread_getspecific' /usr/lib/gcc/x86_64-linux-gnu/4.6/../../../../lib/libboost_thread-mt.a(thread.o): In function `boost::this_thread::disable_interruption::disable_interruption()': (.text+0x59f): undefined reference to `pthread_getspecific' Some Gotchas that I have collected from other StackOverflow posts and have already checked: The boost libs are all present at /usr/lib I am not getting any compile errors for inability to find the boost headers, so they must be getting found. I am trying to link statically, but I believe eclipse should be passing the correct arguments to make that happen since my CMakeLists.txt includes SET(Boost_USE_STATIC_LIBS ON) I'm officially out of ideas here, I have tried doing local builds of boost and a bunch of other stuff with no more success. I even re-installed Ubuntu to ensure I haven't completely fracked the libs directories and links with multiple weird versions or anything else. Any help would be muchly appreciated.

    Read the article

  • Using concurrently 2 versions of boost

    - by idimba
    I'm using RHEL 5.3, which is shipped with gcc 4.1.2 and boost 1.33. There're some features I want, that are missing in the boost 1.33. Therefore the thought was to upgrade to fresh boost release 1.43. Is it possible to use concurrently some header-only library(s) from boost 1.43 and the rest from 1.33? For example I want to use unorded_map, which is missing in boost 1.33. Is it possible to use concurrently binary boost libraries from different releases?

    Read the article

  • Help with Boost Grammar

    - by Decmanc04
    I have been using the following win32 console code to try to parse a B Machine Grammar embedded within C++ using Boost Spirit grammar template. I am a relatively new Boost user. The code compiles, but when I run the .exe file produced by VC++2008, the program partially parses the input file. I believe the problem is with my grammar definition or the functions attached as semantic atctions. The code is given below: // BIFAnalyser.cpp : Defines the entry point for the console application. // // /*============================================================================= Copyright (c) Temitope Jos Onunkun 2010 http://www.dcs.kcl.ac.uk/pg/onun/ Use, modification and distribution is subject to the Boost Software License, Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) =============================================================================*/ //////////////////////////////////////////////////////////////////////////// // // // B Machine parser using the Boost "Grammar" and "Semantic Actions". // // // //////////////////////////////////////////////////////////////////////////// #include <boost/spirit/core.hpp> #include <boost/tokenizer.hpp> #include <iostream> #include <string> #include <fstream> #include <vector> #include <utility> /////////////////////////////////////////////////////////////////////////////////////////// using namespace std; using namespace boost::spirit; /////////////////////////////////////////////////////////////////////////////////////////// // // Semantic actions // //////////////////////////////////////////////////////////////////////////// vector<string> strVect; namespace { //semantic action function on individual lexeme void do_noint(char const* str, char const* end) { string s(str, end); if(atoi(str)) { ; } else { strVect.push_back(s); cout << "PUSH(" << s << ')' << endl; } } //semantic action function on addition of lexemes void do_add(char const*, char const*) { cout << "ADD" << endl; for(vector<string>::iterator vi = strVect.begin(); vi < strVect.end(); ++vi) cout << *vi << " "; } //semantic action function on subtraction of lexemes void do_subt(char const*, char const*) { cout << "SUBTRACT" << endl; for(vector<string>::iterator vi = strVect.begin(); vi < strVect.end(); ++vi) cout << *vi << " "; } //semantic action function on multiplication of lexemes void do_mult(char const*, char const*) { cout << "\nMULTIPLY" << endl; for(vector<string>::iterator vi = strVect.begin(); vi < strVect.end(); ++vi) cout << *vi << " "; cout << "\n"; } //semantic action function on division of lexemes void do_div(char const*, char const*) { cout << "\nDIVIDE" << endl; for(vector<string>::iterator vi = strVect.begin(); vi < strVect.end(); ++vi) cout << *vi << " "; } //semantic action function on simple substitution void do_sSubst(char const* str, char const* end) { string s(str, end); //use boost tokenizer to break down tokens typedef boost::tokenizer<boost::char_separator<char> > Tokenizer; boost::char_separator<char> sep("-+/*:=()"); // default char separator Tokenizer tok(s, sep); Tokenizer::iterator tok_iter = tok.begin(); pair<string, string > dependency; //create a pair object for dependencies //save first variable token in simple substitution dependency.first = *tok.begin(); //create a vector object to store all tokens vector<string> dx; // for( ; tok_iter != tok.end(); ++tok_iter) //save all tokens in vector { dx.push_back(*tok_iter ); } vector<string> d_hat; //stores set of dependency pairs string dep; //pairs variables as string object for(int unsigned i=1; i < dx.size()-1; i++) { dependency.second = dx.at(i); dep = dependency.first + "|->" + dependency.second + " "; d_hat.push_back(dep); } cout << "PUSH(" << s << ')' << endl; for(int unsigned i=0; i < d_hat.size(); i++) cout <<"\n...\n" << d_hat.at(i) << " "; cout << "\nSIMPLE SUBSTITUTION\n"; } //semantic action function on multiple substitution void do_mSubst(char const* str, char const* end) { string s(str, end); //use boost tokenizer to break down tokens typedef boost::tokenizer<boost::char_separator<char> > Tok; boost::char_separator<char> sep("-+/*:=()"); // default char separator Tok tok(s, sep); Tok::iterator tok_iter = tok.begin(); // string start = *tok.begin(); vector<string> mx; for( ; tok_iter != tok.end(); ++tok_iter) //save all tokens in vector { mx.push_back(*tok_iter ); } mx.push_back("END\n"); //add a marker "end" for(unsigned int i=0; i<mx.size(); i++) { // if(mx.at(i) == "END" || mx.at(i) == "||" ) // break; // else if( mx.at(i) == "||") // do_sSubst(str, end); // else // { // do_sSubst(str, end); // } cout << "\nTokens ... " << mx.at(i) << " "; } cout << "PUSH(" << s << ')' << endl; cout << "MULTIPLE SUBSTITUTION\n"; } } //////////////////////////////////////////////////////////////////////////// // // Simple Substitution Grammar // //////////////////////////////////////////////////////////////////////////// // Simple substitution grammar parser with integer values removed struct Substitution : public grammar<Substitution> { template <typename ScannerT> struct definition { definition(Substitution const& ) { multi_subst = (simple_subst [&do_mSubst] >> +( str_p("||") >> simple_subst [&do_mSubst]) ) ; simple_subst = (Identifier >> str_p(":=") >> expression)[&do_sSubst] ; Identifier = alpha_p >> +alnum_p//[do_noint] ; expression = term >> *( ('+' >> term)[&do_add] | ('-' >> term)[&do_subt] ) ; term = factor >> *( ('*' >> factor)[&do_mult] | ('/' >> factor)[&do_div] ) ; factor = lexeme_d[( (alpha_p >> +alnum_p) | +digit_p)[&do_noint]] | '(' >> expression >> ')' | ('+' >> factor) ; } rule<ScannerT> expression, term, factor, Identifier, simple_subst, multi_subst ; rule<ScannerT> const& start() const { return multi_subst; } }; }; //////////////////////////////////////////////////////////////////////////// // // Main program // //////////////////////////////////////////////////////////////////////////// int main() { cout << "************************************************************\n\n"; cout << "\t\t...Machine Parser...\n\n"; cout << "************************************************************\n\n"; // cout << "Type an expression...or [q or Q] to quit\n\n"; //prompt for file name to be input cout << "Please enter a filename...or [q or Q] to quit:\n\n "; char strFilename[256]; //file name store as a string object cin >> strFilename; ifstream inFile(strFilename); // opens file object for reading //output file for truncated machine (operations only) Substitution elementary_subst; // Simple substitution parser object string str, next; // inFile.open(strFilename); while (inFile >> str) { getline(cin, next); str += next; if (str.empty() || str[0] == 'q' || str[0] == 'Q') break; parse_info<> info = parse(str.c_str(), elementary_subst, space_p); if (info.full) { cout << "\n-------------------------\n"; cout << "Parsing succeeded\n"; cout << "\n-------------------------\n"; } else { cout << "\n-------------------------\n"; cout << "Parsing failed\n"; cout << "stopped at: \": " << info.stop << "\"\n"; cout << "\n-------------------------\n"; } } cout << "Please enter a filename...or [q or Q] to quit\n"; cin >> strFilename; return 0; } The contents of the file I tried to parse, which I named "mf7.txt" is given below: debt:=(LoanRequest+outstandingLoan1)*20 || newDebt := loanammount-paidammount The output when I execute the program is: ************************************************************ ...Machine Parser... ************************************************************ Please enter a filename...or [q or Q] to quit: c:\tplat\mf7.txt PUSH(LoanRequest) PUSH(outstandingLoan1) ADD LoanRequest outstandingLoan1 MULTIPLY LoanRequest outstandingLoan1 PUSH(debt:=(LoanRequest+outstandingLoan1)*20) ... debt|->LoanRequest ... debt|->outstandingLoan1 SIMPLE SUBSTITUTION Tokens ... debt Tokens ... LoanRequest Tokens ... outstandingLoan1 Tokens ... 20 Tokens ... END PUSH(debt:=(LoanRequest+outstandingLoan1)*20) MULTIPLE SUBSTITUTION ------------------------- Parsing failedstopped at: ": " ------------------------- My intention is to capture only the variables in the file, which I managed to do up to the "||" string. Clearly, the program is not parsing beyond the "||" string in the input file. I will appreciate assistance to fix the grammar. SOS, please.

    Read the article

  • Boost Thread Synchronization

    - by Dave18
    I don't see synchronized output when i comment the the line wait(1) in thread(). can I make them run at the same time (one after another) without having to use 'wait(1)'? #include <boost/thread.hpp> #include <iostream> void wait(int seconds) { boost::this_thread::sleep(boost::posix_time::seconds(seconds)); } boost::mutex mutex; void thread() { for (int i = 0; i < 100; ++i) { wait(1); mutex.lock(); std::cout << "Thread " << boost::this_thread::get_id() << ": " << i << std::endl; mutex.unlock(); } } int main() { boost::thread t1(thread); boost::thread t2(thread); t1.join(); t2.join(); }

    Read the article

  • Trying to use boost lambda, but my code won't compile

    - by hamishmcn
    Hi, I am trying to use boost lambda to avoid having to write trivial functors. For example, I want to use the lambda to access a member of a struct or call a method of a class, eg: #include <vector> #include <utility> #include <algorithm> #include <boost/lambda/lambda.hpp> using namespace std; using namespace boost::lambda; vector< pair<int,int> > vp; vp.push_back( make_pair<int,int>(1,1) ); vp.push_back( make_pair<int,int>(3,2) ); vp.push_back( make_pair<int,int>(2,3) ); sort(vp.begin(), vp.end(), _1.first > _2.first ); When I try and compile this I get the following errors: error C2039: 'first' : is not a member of 'boost::lambda::lambda_functor<T>' with [ T=boost::lambda::placeholder<1> ] error C2039: 'first' : is not a member of 'boost::lambda::lambda_functor<T>' with [ T=boost::lambda::placeholder<2> ] Since vp contains pair<int,int> I thought that _1.first should work. What I am doing wrong?

    Read the article

  • boost::asio::async_resolve Problem

    - by Moo-Juice
    Hi All, I'm in the process of constructing a Socket class that uses boost::asio. To start with, I made a connect method that took a host and a port and resolved it to an IP address. This worked well, so I decided to look in to async_resolve. However, my callback always gets an error code of 995 (using the same destination host/port as when it worked synchronously). code: Function that starts the resolution: // resolve a host asynchronously template<typename ResolveHandler> void resolveHost(const String& _host, Port _port, ResolveHandler _handler) const { boost::asio::ip::tcp::endpoint ret; boost::asio::ip::tcp::resolver::query query(_host, boost::lexical_cast<std::string>(_port)); boost::asio::ip::tcp::resolver r(m_IOService); r.async_resolve(query, _handler); }; // eo resolveHost Code that calls this function: void Socket::connect(const String& _host, Port _port) { // Anon function for resolution of the host-name and asynchronous calling of the above auto anonResolve = [this](const boost::system::error_code& _errorCode, boost::asio::ip::tcp::resolver_iterator _epIt) { // raise event onResolve.raise(SocketResolveEventArgs(*this, !_errorCode ? (*_epIt).host_name() : String(""), _errorCode)); // perform connect, calling back to anonymous function if(!_errorCode) connect(*_epIt); }; // Resolve the host calling back to anonymous function Root::instance().resolveHost(_host, _port, anonResolve); }; // eo connect The message() function of the error_code is: The I/O operation has been aborted because of either a thread exit or an application request And my main.cpp looks like this: int _tmain(int argc, _TCHAR* argv[]) { morse::Root root; TextSocket s; s.connect("somehost.com", 1234); while(true) { root.performIO(); // calls io_service::run_one() } return 0; } Thanks in advance!

    Read the article

  • Boost Property_Tree iterators, how to handle them?

    - by Andry
    Hello... I am sorry but I asked a question about the same argument before, but my problem concerns another aspect of the one described in that question (How to iterate a boost...). My problem is this, take a look at the following code: #include <iostream> #include <string> #include <boost/property_tree/ptree.hpp> #include <boost/property_tree/xml_parser.hpp> #include <boost/algorithm/string/trim.hpp> int main(int argc, char** argv) { using boost::property_tree::ptree; ptree pt; read_xml("try.xml", pt); ptree::const_iterator end = pt.end(); for (ptree::const_iterator it = pt.begin(); it != end; it++) std::cout << "Here " << it->? << std::endl; } Well, as told me in the previous question, there is the possibility to use iterators on property_tree in Boost, but I do not know what type it is... and what methods or properties I can use... Well, I assume that it must be another ptree or something representing another xml hierarchy to be browsed again (if I want) but documentation about this is very bad... I do not know why, but in boost docs I cannot find nothing good about this... just something about a macro to browse nodes, but this approach is one I would really like to avoid... Well, the question is so... Once getting the iterator on a ptree, how can I access node name, value, parameters (a node in a xml file)? Thankyou

    Read the article

  • Boost threading/mutexs, why does this work?

    - by Flamewires
    Code: #include <iostream> #include "stdafx.h" #include <boost/thread.hpp> #include <boost/thread/mutex.hpp> using namespace std; boost::mutex mut; double results[10]; void doubler(int x) { //boost::mutex::scoped_lock lck(mut); results[x] = x*2; } int _tmain(int argc, _TCHAR* argv[]) { boost::thread_group thds; for (int x = 10; x>0; x--) { boost::thread *Thread = new boost::thread(&doubler, x); thds.add_thread(Thread); } thds.join_all(); for (int x = 0; x<10; x++) { cout << results[x] << endl; } return 0; } Output: 0 2 4 6 8 10 12 14 16 18 Press any key to continue . . . So...my question is why does this work(as far as i can tell, i ran it about 20 times), producing the above output, even with the locking commented out? I thought the general idea was: in each thread: calculate 2*x copy results to CPU register(s) store calculation in correct part of array copy results back to main(shared) memory I would think that under all but perfect conditions this would result in some part of the results array having 0 values. Is it only copying the required double of the array to a cpu register? Or is it just too short of a calculation to get preempted before it writes the result back to ram? Thanks.

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >