Search Results

Search found 1854 results on 75 pages for 'country'.

Page 70/75 | < Previous Page | 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Speed Problem with Wireless Connectivity on Cisco 877w

  - by Carl Crawley

  Having a bit of a weird one with my local LAN setup. I recently installed a Cisco 877W router on my DSL2+ connection and all is working really well.. Upgraded the IOS to 12.4 and my wired clients are streaming connectivity superfast at 1.3mb/s. However, there seems to be an issue with my wireless clients - I can't seem to stream any data across the local wireless connection (LAN) and using the Internet, whilst responsive enough isn't really comparable with the wired connection speed. For example, all devices are connected to an 8 Port Gb switch on FE0 from the Router with a NAS disk and on my wired clients, I can transfer/stream etc absolutely fine - however, transferring a local 700Mb file on my local LAN estimates 7-8 hours to transfer :( The Wireless config is as follows : interface Dot11Radio0 description WIRELESS INTERFACE no ip address ! encryption mode ciphers tkip ! ssid [MySSID] ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 channel 2462 station-role root rts threshold 2312 world-mode dot11d country GB indoor bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding All devices are connected to the Gb Switch which is connected to FE0 with the following: Hardware is Fast Ethernet, address is 0021.a03e.6519 (bia 0021.a03e.6519) Description: Uplink to Switch MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 14000 bits/sec, 19 packets/sec 5 minute output rate 167000 bits/sec, 23 packets/sec 177365 packets input, 52089562 bytes, 0 no buffer Received 919 broadcasts, 0 runts, 0 giants, 0 throttles 260 input errors, 260 CRC, 0 frame, 0 overrun, 0 ignored 0 input packets with dribble condition detected 156673 packets output, 106218222 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Not sure why I'm having problems on the wireless and I've reached the end of my Cisco knowledge... Thanks for any pointers! Carl

  Read the article

• How to embed html table into the bpdy of email

  - by Michael Mao

  Hi all: I am sending info to target email via PHP native mail() method right now. Everything else works fine but the table part troubles me the most. See sample output : Dear Michael Mao : Thank you for purchasing flight tickets with us, here is your receipt : Your tickets will be delivered by mail to the following address : Street Address 1 : sdfsdafsadf sdf Street Address 2 : N/A City : Sydney State : nsw Postcode : 2 Country : Australia Credit Card Number : *************1234 Your purchase details are recorded as : <table><tr><th class="delete">del?</th><th class="from_city">from</th><th class="to_city">to</th><th class="quantity">qty</th><th class="price">unit price</th><th class="price">total price</th></tr><tr class="evenrow" id="Sydney-Lima"><td><input name="isDeleting" type="checkbox"></td><td>Sydney</td><td>Lima</td><td>1</td><td>1030.00</td><td>1030</td></tr><tr class="oddrow" id="Sydney-Perth"><td><input name="isDeleting" type="checkbox"></td><td>Sydney</td><td>Perth</td><td>3</td><td>340.00</td><td>1020</td></tr><tr class="totalprice"><td colspan="5">Grand Total Price</td><td id="grandtotal">2050</td></tr></table> The source of table is directly taken from a webpage, exactly as the same. However, Gmail, Hotmail and most of other emails will ignore to render this as a table. So I am wondering, without using Outlook or other email sending agent software, how could I craft a embedded table for the PHP mail() method to send? Current code snippet corresponds to table generation : $purchaseinfo = $_POST["purchaseinfo"]; //if html tags are not to be filtered in the body of email $stringBuilder .= "<table>" .stripslashes($purchaseinfo) ."</table>"; //must send json response back to caller ajax request if(mail($email, 'Your purchase information on www.hardlyworldtravel.com', $emailbody, $headers)) echo json_encode(array("feedback"=>"successful")); else echo json_encode(array("feedback"=>"error")); Any hints and suggestions are welcomed, thanks a lot in advance.

  Read the article

• BASH, multiple arrays and a loop.

  - by S1syphus

  At work, we 7 or 8 hardrives we dispatch over the country, each have unique labels which are not sequential. Ideally drives are plugged in our desktop, then gets folders from the server that correspond to the drive name. Sometimes, only one hard drive gets plugged in sometimes multiples, possibly in the future more will be added. Each is mounts to /Volumes/ and it's identifier; so for example /Volumes/f00, where f00 is the identifier. What I want to happen, scan volumes see if any any of the drives are plugged in, then checks the server to see if the folder exists, if ir does copy folder and recursive folders. Here is what I have so far, it checks if the drive exists in Volumes: #!/bin/sh #Declare drives in the array ARRAY=( foo bar long ) #Get the drives from the array DRIVES=${#ARRAY[@]} #Define base dir to check BaseDir="/Volumes" #Define shared server fold on local mount points #I plan to use AFP eventually, but for the sake of ease #using a local mount. ServerMount="BigBlue" #Define folder name for where files are to come from Dispatch="File-Dispatch" dir="$BaseDir/${ARRAY[${i}]}" #Loop through each item in the array and check if exists on /Volumes for (( i=0;i<$DRIVES;i++)); do dir="$BaseDir/${ARRAY[${i}]}" if [ -d "$dir" ]; then echo "$dir exists, you win." else echo "$dir is not attached." fi done What I can't figure out how to do, is how to check the volumes for the server while looping through the harddrive mount points. So I could do something like: #!/bin/sh #Declare drives, and folder location in arrays ARRAY=( foo bar long ) ARRAY1=($(ls ""$BaseDir"/"$ServerMount"/"$Dispatch"")) #Get the drives from the array DRIVES=${#ARRAY[@]} SERVERFOLDER=${#ARRAY1[@]} #Define base dir to check BaseDir="/Volumes" #Define shared server fold on local mount points ServerMount="BigBlue #Define folder name for where files are to come from Dispatch="File-Dispatch" dir="$BaseDir/${ARRAY[${i}]}" #List the contents from server directory into array ARRAY1=($(ls ""$BaseDir"/"$ServerMount"/"$Dispatch"")) echo ${list[@]} for (( i=0;i<$DRIVES;i++)); (( i=0;i<$SERVERFOLDER;i++)); do dir="$BaseDir/${ARRAY[${i}]}" ser="${ARRAY1[${i}]}" if [ "$dir" =~ "$sir" ]; then cp "$sir" "$dir" else echo "$dir is not attached." fi done I know, that is pretty wrong... well very, but I hope it gives you the idea of what I am trying to achieve. Any ideas or suggestions?

  Read the article

• Middleware with generic communication media layer

  - by Tom

  Greetings all, I'm trying to implement middleware (driver) for an embedded device with generic communication media layer. Not sure what is the best way to do it so I'm seeking an advice from more experienced stackoverflow users:). Basically we've got devices around the country communicating with our servers (or a pda/laptop in used in field). Usual form of communication is over TCP/IP, but could be also using usb, RF dongle, IR, etc. The plan is to have object corresponding with each of these devices, handling the proprietary protocol on one side and requests/responses from other internal systems on the other. The thing is how create something generic in between the media and the handling objects. I had a play around with the TCP dispatcher using boost.asio but trying to create something generic seems like a nightmare :). Anybody tried to do something like that? What is the best way how to do it? Example: Device connects to our Linux server. New middleware instance is created (on the server) which announces itself to one of the running services (details are not important). The service is responsible for making sure that device's time is synchronized. So it asks the middleware what is the device's time, driver translates it to device language (protocol) and sends the message, device responses and driver again translates it for the service. This might seem as a bit overkill for such a simple request but imagine there are more complex requests which the driver must translate, also there are several versions of the device which use different protocol, etc. but would use the same time sync service. The goal is to abstract the devices through the drivers to be able to use the same service to communicate with them. Another example: we find out that the remote communications with the device are down. So we send somebody out with PDA, he connects to the device using USB cable. Starts up the application which has the same functionality as the timesync service. Again middleware instance is created (on the PDA) to translate communication between application and the device this time only using USB/serial media not TCP/IP as in previous example. I hope it makes more sense now :) Cheers, Tom

  Read the article

• Inference engine to calculate matching set according to internal rules

  - by Zecrates

  I have a set of objects with attributes and a bunch of rules that, when applied to the set of objects, provides a subset of those objects. To make this easier to understand I'll provide a concrete example. My objects are persons and each has three attributes: country of origin, gender and age group (all attributes are discrete). I have a bunch of rules, like "all males from the US", which correspond with subsets of this larger set of objects. I'm looking for either an existing Java "inference engine" or something similar, which will be able to map from the rules to a subset of persons, or advice on how to go about creating my own. I have read up on rule engines, but that term seems to be exclusively used for expert systems that externalize the business rules, and usually doesn't include any advanced form of inferencing. Here are some examples of the more complex scenarios I have to deal with: I need the conjunction of rules. So when presented with both "include all males" and "exclude all US persons in the 10 - 20 age group," I'm only interested in the males outside of the US, and the males within the US that are outside the 10 - 20 age group. Rules may have different priorities (explicitly defined). So a rule saying "exclude all males" will override a rule saying "include all US males." Rules may be conflicting. So I could have both an "include all males" and an "exclude all males" in which case the priorities will have to settle the issue. Rules are symmetric. So "include all males" is equivalent to "exclude all females." Rules (or rather subsets) may have meta rules (explicitly defined) associated with them. These meta rules will have to be applied in any case that the original rule is applied, or if the subset is reached via inferencing. So if a meta rule of "exclude the US" is attached to the rule "include all males", and I provide the engine with the rule "exclude all females," it should be able to inference that the "exclude all females" subset is equivalent to the "include all males" subset and as such apply the "exclude the US" rule additionally. I can in all likelihood live without item 5, but I do need all the other properties mentioned. Both my rules and objects are stored in a database and may be updated at any stage, so I'd need to instantiate the 'inference engine' when needed and destroy it afterward.

  Read the article

• How do we, as a community, help encourage programming in public schools? (Or state Schools for the U

  - by NoMoreZealots

  PRIMARY MOTIVATION My office gets involved with the "First Robotics" competitions and one thing that lingers year to year is the students typically have no preparation for doing even simple programming as part of the public schools system. While the science classes provide some basic grasp of mechanical and electrical concepts, by in large computer programming gets no coverage from the curriculum. (This my be different in other areas of the country/world.) What makes it worse is there is only a short period of time you have to prepare the student's and help them design the robot. Talking to some professors from local colleges, it's a problem because you can't assume even the most basic understanding for freshman CS majors. Languages like Python, Lua and BASIC are simple enough for at least high school level students, if not younger. SCOPE So how do you get public schools to support a programming, at least to the level of "Try it in BASIC" examples that used to be at the end of a chapter in my Algebra book? At least enough to prepare them for event's such as the FIRST Robotic competitions. Which the primary objectives are to teach problem solving and team work, and to possible foster an interest in Math, Science and Engineering in general. (Not force feed to them, as some people her seem to be implying.) Edit: Why teach kids: (Since 2000 CS enrollment in US colleges has decreased by 70% while college enrollment has increased, this is a PROBLEM.) Saying there is no value in teaching someone programming in Jr./High school because they might think "they know programming." Is like saying there's no value in teaching High school science and physics, because they might decide they "know physics." Leading to abuse like: "I passed a high school physics class, I'm going to develop a Unified Quantum Gravitational Theory." Better Prepared students are better students. Instead it would allows college programs to raise the bar on the entry level courses, allowing students to be weeded out based on their understanding of more advanced material. Plus people who did poorly in that in topic in High school aren't as likely to say "I think there's money in computer's so I'll computer science." Plus if people take it in high school and decide THEN that it's not for them, it's better than them wasting their money to PAY a college to figure that out. The result is that people who take the degree are more likely to succeed and be there for the RIGHT reasons. (i.e. It's what they REALLY want to do. And that's REALLY the key to being good at anything.) Programming is like anything else, the more practice and genuine interest you have the better you get. If you start them later, they get less practice. The earlier give them the opportunity to start, the more practice they will get. All other things equal, the more practice the better the programmer.

  Read the article

• How to embed html table into the body of email

  - by Michael Mao

  Hi all: I am sending info to target email via PHP native mail() method right now. Everything else works fine but the table part troubles me the most. See sample output : Dear Michael Mao : Thank you for purchasing flight tickets with us, here is your receipt : Your tickets will be delivered by mail to the following address : Street Address 1 : sdfsdafsadf sdf Street Address 2 : N/A City : Sydney State : nsw Postcode : 2 Country : Australia Credit Card Number : *************1234 Your purchase details are recorded as : <table><tr><th class="delete">del?</th><th class="from_city">from</th><th class="to_city">to</th><th class="quantity">qty</th><th class="price">unit price</th><th class="price">total price</th></tr><tr class="evenrow" id="Sydney-Lima"><td><input name="isDeleting" type="checkbox"></td><td>Sydney</td><td>Lima</td><td>1</td><td>1030.00</td><td>1030</td></tr><tr class="oddrow" id="Sydney-Perth"><td><input name="isDeleting" type="checkbox"></td><td>Sydney</td><td>Perth</td><td>3</td><td>340.00</td><td>1020</td></tr><tr class="totalprice"><td colspan="5">Grand Total Price</td><td id="grandtotal">2050</td></tr></table> The source of table is directly taken from a webpage, exactly as the same. However, Gmail, Hotmail and most of other emails will ignore to render this as a table. So I am wondering, without using Outlook or other email sending agent software, how could I craft a embedded table for the PHP mail() method to send? Current code snippet corresponds to table generation : $purchaseinfo = $_POST["purchaseinfo"]; //if html tags are not to be filtered in the body of email $stringBuilder .= "<table>" .stripslashes($purchaseinfo) ."</table>"; //must send json response back to caller ajax request if(mail($email, 'Your purchase information on www.hardlyworldtravel.com', $emailbody, $headers)) echo json_encode(array("feedback"=>"successful")); else echo json_encode(array("feedback"=>"error")); Any hints and suggestions are welcomed, thanks a lot in advance.

  Read the article

• Wicket and Spring Intergation

  - by Vinothbabu

  I have a wicket contact form, and i receive the form object. Now i need to pass this object to Spring Service. package com.mysticcoders.mysticpaste.web.pages; import org.apache.wicket.markup.html.WebPage; import org.apache.wicket.markup.html.form.Form; import org.apache.wicket.markup.html.form.TextField; import org.apache.wicket.markup.html.panel.FeedbackPanel; import com.mysticcoders.mysticpaste.model.Contact; import org.apache.wicket.model.CompoundPropertyModel; import com.mysticcoders.mysticpaste.services.IContact; public class FormPage extends WebPage { private Contact contact; private IContact icontact; public FormPage() { // Add a FeedbackPanel for displaying our messages FeedbackPanel feedbackPanel = new FeedbackPanel("feedback"); add(feedbackPanel); Form<Object> form = new Form<Object>("contactForm", new CompoundPropertyModel<Object>(contact)) { private static final long serialVersionUID = 1L; protected void onSubmit(Contact contact) { icontact.saveContact(contact); } }; form.add(new TextField<Object>("name")); form.add(new TextField<Object>("email")); form.add(new TextField<Object>("country")); form.add(new TextField<Object>("age")); add(form); // add a simple text field that uses Input's 'text' property. Nothing // can go wrong here } } I am pretty much sure that we need to do something with application-context xml where i may need to wire out. My Application-context.xml <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tx="http://www.springframework.org/schema/tx" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.5.xsd"> <bean id="WicketApplication" class="com.mysticcoders.mysticpaste.web.pages.WicketApplication" /> </beans> My Question is simple. What should i do which can make my onSubmit method call the Spring Service? Could someone let me know what needs to modified in my Application-context.xml so that once the form gets submitted, it contacts the Spring Service class.

  Read the article

• CSV File Content Display Issue

  - by Pankaj Khurana

  Hi, I want to retrieve contents from a csv file for that i am using following code: <?php $fo = fopen("record.csv", "rb+"); while(!feof($fo)) { $contents[] = fgetcsv($fo,0,';'); } print_r($contents); fclose($fo); ?> But my records are displayed in the following format: ????††???????†††??†††††????"Search Transactions Results" ††††??†???????††††?††††††??? ???????????? ?????????????? ?????????? My csv file format: "Search Transactions Results" "Transaction ID","Reference Transaction ID","Date","Type","Subject","Item Number","Item Name","Invoice ID","Name","Email","Shipping Name","Shipping Address Line 1","Shipping Address Line 2","Shipping Address City","Shipping State/Province","Shipping Zip/Postal Code","Shipping Address Country","Shipping Method","Address Status","Contact Phone Number","Gross Amount","Receipt ID","Custom Field","Option 1 Name","Option 1 Value","Option 2 Name","Option 2 Value","Note","Auction Site","Auction User ID","Item URL","Auction Closing Date","Insurance Amount","Currency","Fees","Net Amount","Shipping & Handling Amount","Sales Tax Amount","To Email","Time","Time Zone" "1T","",5/5/2010 2:10:44 PM,"Payment Processed","CFP Self Study Kit","1","CFP Self Study Kit","","User1","[email protected]","","","","","","","","","N","","68.18","R1","","","","","","","","","",,"","USD","-2.62","65.56","0","0","[email protected]","01:40","Asia/Calcutta" "2T","",5/19/2010 4:04:08 PM,"Payment Processed","CFP Self Study Kit","1","CFP Self Study Kit","","User2","[email protected]","","","","","","","","","N","","68.18","R2","","","","","","","","","",,"","USD","-2.62","65.56","0","0","[email protected]","03:34","Asia/Calcutta" "3T","1RT",5/19/2010 5:28:45 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","17492.6","","","","","","","","","","",,"","INR","0","17492.6","0","0","","04:58","Asia/Calcutta" "4T","2RT",5/19/2010 5:28:45 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","-393.36","","","","","","","","","","",,"","USD","0","-393.36","0","0","","04:58","Asia/Calcutta" "5T","",5/19/2010 5:28:45 PM,"Transfer to Bank Initiated","P1006","","P1006",""," ","","","","","","","","","","N","","-17492.6","","","","","","","","","","",,"","INR","0","-17492.6","0","0","","04:58","Asia/Calcutta" "6T","",5/20/2010 5:38:02 PM,"Transfer to Bank Completed","P1006","","P1006",""," ","","","","","","","","","","N","","-17492.6","","","","","","","","","","",,"","INR","0","-17492.6","0","0","","05:08","Asia/Calcutta" "7T","",5/21/2010 12:32:37 PM,"Payment Processed","FP - LVC Plus","","FP - LVC Plus","","User3","[email protected]","User3","NEW DELHI","BEHIND KARNATAKA BANK LD","SOUTH","NEW DELHI","110023","IN","","N","","283.96","","","","","","","","","","",,"","USD","-9.95","274.01","0","0","[email protected]","00:02","Asia/Calcutta" "8T","",5/25/2010 4:40:48 PM,"Transfer to Bank Initiated","P1006","","P1006",""," ","","","","","","","","","","N","","-12569.85","","","","","","","","","","",,"","INR","0","-12569.85","0","0","","04:10","Asia/Calcutta" "9T","3RT",5/25/2010 4:40:48 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","-274.01","","","","","","","","","","",,"","USD","0","-274.01","0","0","","04:10","Asia/Calcutta" "10T","4RT",5/25/2010 4:40:48 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","12569.85","","","","","","","","","","",,"","INR","0","12569.85","0","0","","04:10","Asia/Calcutta" "11T","",5/26/2010 4:57:39 PM,"Transfer to Bank Completed","P1006","","P1006",""," ","","","","","","","","","","N","","-12569.85","","","","","","","","","","",,"","INR","0","-12569.85","0","0","","04:27","Asia/Calcutta" "Total","-247.05 USD","-15.19","-262.24" "Total","0.00 INR","0.00","0.00" I want to retrieve the records where "Type"="Payment Processed". I want to retrieve content in a key value format that is for e.g. Transaction ID-1T as i have to store this values in a database but display is not proper. I am unable to find out the reason for the same please help me on this. Thanks

  Read the article

• drupal (CMS) or codeigniter (MVC) for creating a new web application?

  - by ajsie

  im going to create a new web application that is very customized. it will contain images, that are fully searchable - in a very, very customized way. when you click on the pictures you can add comments and so on. it requires users to be registered, but the registration/login process will be highly customized too. at the moment im using CodeIgniter for this. But i've read a lot of posts about CMS like Drupal and it sounds like i could let it handle basic stuff, maybe design and other front end work. i have no experience with CMS, in fact, i just started to use a MVC framework like CI and was impressed of how much easier it gets to start developing. so i wonder, if i'm going to create this kind of application, could i use drupal and then add the usual stuff, as i was going to do with CodeIgniter, like controllers, views, models, config files, my own libraries and so on? how does it work on a system like Drupal. how do you code PHP with it as with any MVC framework. it sounds like it has a lot of modules, i just wonder, if i can use it as a MVC framework but have the benefit of having all these basic stuff and design ready to use? cause then it sounds like the best "library" to provide for a web application from scratch. or is it difficult to create a customized app with it? i guess it has modules like images and users, but then how could i customize these so that every image has tags on it and country information, or have every user subscribing to changes to an image, that email will be sent to users and so on? cause i guess its easy to install a module. the question is, how do i customize it. maybe i don't need all that table columns. maybe i want to add/remove business logic. what are the pros and cons with using Drupal for this? is it even the right way to go? can you make a Stackoverflow with Drupal? Facebook? Twitter? Youtube? assuming that you know php of course. share your thoughts cause im totally new on creating a web application! thanks

  Read the article

• Inserting checkbox values

  - by rabeea

  hey i have registration form that has checkboxes along with other fields. i cant insert the selected checkbox values into the data base. i have made one field in the database for storing all checked values. this is the code for checkbox part in the form: Websites, IT and Software Writing and Content <pre><input type="checkbox" name="expertise[]" value="Design and Media"> Design and Media <input type="checkbox" name="expertise[]" value="Data entry and Admin"> Data entry and Admin </pre> <pre><input type="checkbox" name="expertise[]" value="Engineering and Skills"> Engineering and Science <input type="checkbox" name="expertise[]" value="Seles and Marketing"> Sales and Marketing </pre> <pre><input type="checkbox" name="expertise[]" value="Business and Accounting"> Business and Accounting <input type="checkbox" name="expertise[]" value="Others"> Others </pre> and this is the corresponding php code for inserting data $checkusername=mysql_query("SELECT * FROM freelancer WHERE fusername='{$_POST['username']}'"); if (mysql_num_rows($checkusername)==1) { echo "username already exist"; } else { $query = "insert into freelancer(ffname,flname,fgender,femail,fusername,fpwd,fphone,fadd,facc,facc_name,fbank_details,fcity,fcountry,fexpertise,fprofile,fskills,fhourly_rate,fresume) values ('".$_POST['first_name']."','".$_POST['last_name']."','".$_POST['gender']."','".$_POST['email']."','".$_POST['username']."','".$_POST['password']."','".$_POST['phone']."','".$_POST['address']."','".$_POST['acc_num']."','".$_POST['acc_name']."','".$_POST['bank']."','".$_POST['city']."','".$_POST['country']."','".implode(',',$_POST['expertise'])."','".$_POST['profile']."','".$_POST['skills']."','".$_POST['rate']."','".$_POST['resume']."')"; $result = ($query) or die (mysql_error()); this code inserts data for all fields but the checkbox value field remains empty???

  Read the article

• SOAP not fetches result in PHP for Mouzenidis travel

  - by ????? ????????????

  I try to get results from http://api.mouzenidis-travel.com/search/ServiceMainSearch.svc?Wsdl There is some methods to fetch data: GetCountries // fetch available country data GetCityDeparture(int countryID) //fetch available departure city data GetFilter(int countryId, List departureCityId) // fetch others filters // My PHP code: $client = new SoapClient("http://api.mouzenidis-travel.com/search/ServiceMainSearch.svc?Wsdl"); $countryList = $client-GetCountries(); // results below [0] => stdClass Object ( [Code] => GR [ID] => 29 [Name] => Греция [NameLat] => Greece ) [1] => stdClass Object ( [Code] => CZ [ID] => 6240 [Name] => Чехия [NameLat] => Czech Republic ) $cityDepObj = $client-GetCityDeparture(array('countryID'=29)); [0] => stdClass Object ( [Code] => MOW [GroupName] => Россия [GroupNameLat] => Россия [GroupOrder] => 4 [ID] => 1 [Name] => Москва [NameLat] => Moscow [CountryID] => 460 [IsDeparture] => 1 [RegionID] => 0 ) [1] => stdClass Object ( [Code] => [GroupName] => Россия [GroupNameLat] => Россия [GroupOrder] => 4 [ID] => 299 [Name] => Архангельск [NameLat] => Arkhangelsk [CountryID] => 460 [IsDeparture] => 1 [RegionID] => 0 ) . . . $client-GetFilter(array(29,array(1))); Fatal error: Uncaught SoapFault exception: [s:Client] No connections available ... I wrote to the Mouzendinis Tech Support, no results. What make I wrong?

  Read the article

• Filter Facebook Stream by Post privacy?

  - by fabian

  Hi there, i query some wall data within my facebook tab. I was wondering how to filter the data (query) to show only post which are visible to a certain country. $query = " SELECT post_id, created_time, attachment,action_links, privacy FROM stream WHERE source_id = ".$page_id." AND viewer_id = ".$user_id." AND actor_id = ".$actor_id." LIMIT 50"; The Output already show Australia: But how to filter for Australia-Only. Array ( [posts] => Array ( [0] => Array ( [post_id] => 123 [viewer_id] => 123 [source_id] => 123 [type] => 46 [app_id] => [attribution] => [actor_id] => 123 [target_id] => [message] => Only for Austria [attachment] => Array ( [description] => ) [app_data] => [action_links] => [comments] => Array ( [can_remove] => 1 [can_post] => 1 [count] => 0 [comment_list] => ) [likes] => Array ( [href] => http://www.facebook.com/social_graph.php?node_id=118229678189906&class=LikeManager [count] => 0 [sample] => [friends] => [user_likes] => 0 [can_like] => 1 ) [privacy] => Array ( [description] => Austria [value] => CUSTOM [friends] => [networks] => [allow] => [deny] => ) [updated_time] => 1271520716 [created_time] => 1271520716 [tagged_ids] => [is_hidden] => 0 [filter_key] => [permalink] => http://www.facebook.com/pages/ )

  Read the article

• Error when passing data between views

  - by Kristoffer Bilek

  I'm using a plist (array of dictionaries) to populate a tableview. Now, when a cell i pressed, I want to pass the reprecented dictionary to the detail view with a segue. It's working properly to fill the tableview, but how do I send the same value to the detail view? This is my try: #import "WinesViewController.h" #import "WineObject.h" #import "WineCell.h" #import "WinesDetailViewController.h" @interface WinesViewController () @end @implementation WinesViewController - (id)initWithStyle:(UITableViewStyle)style { self = [super initWithStyle:style]; if (self) { // Custom initialization } return self; } - (void)viewDidLoad { [super viewDidLoad]; } - (void)viewDidUnload { [super viewDidUnload]; } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return (interfaceOrientation == UIInterfaceOrientationPortrait); } #pragma mark - Table view data source - (void)viewWillAppear:(BOOL)animated { wine = [[WineObject alloc] initWithLibraryName:@"Wine"]; self.title = @"Vinene"; [self.tableView deselectRowAtIndexPath:[self.tableView indexPathForSelectedRow] animated:YES]; } - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { // Return the number of sections. return 1; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { // Return the number of rows in the section. return [wine libraryCount]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"wineCell"; WineCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; // Configure the cell... cell.nameLabel.text = [[wine libraryItemAtIndex:indexPath.row] valueForKey:@"Name"]; cell.districtLabel.text = [[wine libraryItemAtIndex:indexPath.row] valueForKey:@"District"]; cell.countryLabel.text = [[wine libraryItemAtIndex:indexPath.row] valueForKey:@"Country"]; cell.bottleImageView.image = [UIImage imageNamed:[[wine libraryItemAtIndex:indexPath.row] valueForKey:@"Image"]]; cell.flagImageView.image = [UIImage imageNamed:[[wine libraryItemAtIndex:indexPath.row] valueForKey:@"Flag"]]; cell.fyldeImageView.image = [UIImage imageNamed:[[wine libraryItemAtIndex:indexPath.row] valueForKey:@"Fylde"]]; cell.friskhetImageView.image = [UIImage imageNamed:[[wine libraryItemAtIndex:indexPath.row] valueForKey:@"Friskhet"]]; cell.garvesyreImageView.image = [UIImage imageNamed:[[wine libraryItemAtIndex:indexPath.row] valueForKey:@"Garvesyre"]]; return cell; } #pragma mark - Table view delegate - (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender { if ([[segue identifier] isEqualToString:@"DetailSegue"]) { NSIndexPath *selectedRowIndex = [self.tableView indexPathForSelectedRow]; WinesDetailViewController *winesdetailViewController = [segue destinationViewController]; //Here comes the error line: winesdetailViewController.winedetailName = [wine objectAtIndex:indexPath.row] valueForKey:@"Name"]; } } I get one error for: winesdetailViewController.winedetailName = [wine objectAtIndex:indexPath.row] valueForKey:@"Name"]; Use of undeclaired identifier: indexPath. did you mean NSIndexPath? I think I've missed something important here..

  Read the article

• How to send variable to php with ajax?

  - by Dee1983

  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <script type="text/javascript"> function load(thediv, thefile) { if (window.XMLHttpRequest) { xmlhttp = new XMLHttpRequest(); } else { xmlhttp = new ActiveXObject('Microsoft.XMLHTTP)'); } xmlhttp.onreadystatechange = function() { if (xmlhttp.readyState==4 && xmlhttp.status==200) { document.getElementById(thediv) .innerHTML = xmlhttp.responseText; } } xmlhttp.open('GET', thefile, true); xmlhttp.send(); } </script> </head> <body> <?php //connection to db and mysql query $result = mysql_query($query) or die(mysql_error()); $options=""; while ($row=mysql_fetch_array($result)) { $id=$row["idProducts"]; $thing=$row["country"]; $options.="<OPTION VALUE=\"$id\">".$thing.'</option>'; } mysql_close(); ?> <SELECT id="countrySearch" NAME=countrySearch onchange="load('divtest', 'step2.search.php')";> <OPTION VALUE=0>Choose <?=$options?> </SELECT> <div id="divtest"> test </div> </body> step2.search.php consists of: <?php echo "I want it to store the users selection as a variable for php to use"; ?> The problem I have is I want to store what the user selects from the drop down box and use it in php to do a mysql query using the variable from the user select form to form the WHERE part of the mysql statement. Then use ajax to put new data in "divtest". How can I store the user selection into a variable then send it to be used in step2.search.php?

  Read the article

• Printing Two Dimensional Array in Special Format

  - by user554313

  Hello everybody, I am working in a small task that allow the user to enter the regions of any country and store them in one array. Also, each time he enters a region, the system will ask him to enter the neighbours of that entered region and store these neighbours. I did the whole task but I have a small problem: I could not be able to print each region and its neighbours like the following format: Region A: neighbour1 neighbour2 Region B: neighbour1 neighbour2 For example, let us take USA map. I want to print the result as following: Washington D.C: Texas, Florida, Oregon and so on. My code is: import java.io.*; import java.util.Arrays; import java.util.Scanner; public class Test7{public static void main(String[] args) { Scanner kb = new Scanner(System.in); System.out.print("Please enter the number of regions: "); int REGION_COUNT = kb.nextInt(); String[] regionNames = new String[REGION_COUNT]; String[][] regions = new String[REGION_COUNT][2]; for (int r = 0; r < regions.length; r++) { System.out.print("Please enter the name of region #" + (r + 1) + ": "); regionNames[r] = kb.next(); System.out .print("How many neighbors for region #" + (r + 1) + ": "); if (kb.hasNextInt()) { int size = kb.nextInt(); regions[r] = new String[size]; for (int n = 0; n < size; n++) { System.out.print("Please enter the neighbour #" + (n) + ": "); regions[r][n] = kb.next(); } } else System.exit(0); } for (int i = 0; i < REGION_COUNT; i++) { System.out.print(regionNames[i] +": "); for (int k = 0; k < 2; k++) { System.out.print(regions[i][k]+", "); } System.out.println(); } } }

  Read the article

• Update (ajax) only part of table without affecting whole table

  - by ile

  <table width="100%" border="0" cellspacing="0" cellpadding="0" class="list"> <tr> <th><a href="#" class="sortby">Full Name</a></th> <th><a href="#" class="sortby">City</a></th> <th><a href="#" class="sortby">Country</a></th> <th><a href="#" class="sortby">Status</a></th> <th><a href="#" class="sortby">Education</a></th> <th><a href="#" class="sortby">Tasks</a></th> </tr> <div class="dynamicData"> <tr> <td>Firstname Lastname</a></td> <td>Los Angeles</td> <td>USA</td> <td>Married</td> <td>High School</td> <td>4</td> </tr> </tr> <tr> <td>Firstname Lastname</a></td> <td>Los Angeles</td> <td>USA</td> <td>Married</td> <td>High School</td> <td>4</td> </tr> </div> </table> The idea is to update table rows when clicking on link with clasl "sortby" which is part of th table tag. I tried inserting div but this doesn't work. Separating this in two tables is not good solution because witdh in both tables cell are not following each other. Any other solution? Thanks

  Read the article

• GeoIP and Nginx

  - by JavierMartinez

  I have a nginx with geoip, but it is not working rightly. The issue is the next: Nginx are getting geodata from $_SERVER['REMOTE_ADDR'] instead of $_SERVER['HTTP_X_HAPROXY_IP'], which have the real client ip. So, the reported geodata belongs to my server ip instead of client ip. Does anybody where could be the error to fix it? Nginx version and compiled modules: nginx -V nginx version: nginx/1.2.3 TLS SNI support enabled configure arguments: --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log- path=/var/log/nginx/error.log --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --lock-path=/var/lock/nginx.lock --pid-path=/var/run/nginx.pid --with-pcre-jit --with-debug --with-file-aio --with-http_addition_module --with-http_dav_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_realip_module --with-http_secure_link_module --with-http_stub_status_module --with-http_ssl_module --with-http_sub_module --with-http_xslt_module --with-ipv6 --with-sha1=/usr/include/openssl --with-md5=/usr/include/openssl --with-mail --with-mail_ssl_module --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-auth-pam --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-echo --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-upstream-fair --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-dav-ext-module --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-syslog --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-cache-purge nginx site conf (frontend machine) server { root /var/www/storage; server_name ~^.*(\.)?mydomain.com$; if ($host ~ ^(.*)\.mydomain\.com$) { set $new_host $1.mydomain.com; } if ($host !~ ^(.*)\.mydomain\.com$) { set $new_host www.mydomain.com; } add_header Staging true; real_ip_header X-HAProxy-IP; set_real_ip_from 10.5.0.10/32; location /files { expires 30d; if ($uri !~ ^/files/([a-fA-F0-9]+)_(220|45)\.jpg$) { return 403; } rewrite ^/files/([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9]+)_(220|45)\.jpg$ /files/$1/$2/$3/$4/$1$2$3$4$5_$6.jpg break; try_files $uri @to_backend; } location /assets { if ($uri ~ ^/assets/r([a-zA-Z0-9]+[^/])(/(css|js|fonts)/.*)) { rewrite ^/assets/r([a-zA-Z0-9]+[^/])/(css|js|fonts)/(.*)$ /assets/$2/$3 break; } try_files $uri @to_backend; } location / { proxy_set_header Host $new_host; proxy_set_header X-HAProxy-IP $remote_addr; proxy_pass http://10.5.0.10:8080; } location @to_backend { proxy_set_header Host $new_host; proxy_pass http://10.5.0.10:8080; } } nginx.conf (backend machine) http{ ... ## # GeoIP Config ## geoip_country /etc/nginx/geoip/GeoIP.dat; # the country IP database geoip_city /etc/nginx/geoip/GeoLiteCity.dat; # the city IP database ... } fastcgi_params (backend machine) ### SET GEOIP Variables ### fastcgi_param GEOIP_COUNTRY_CODE $geoip_country_code; fastcgi_param GEOIP_COUNTRY_CODE3 $geoip_country_code3; fastcgi_param GEOIP_COUNTRY_NAME $geoip_country_name; fastcgi_param GEOIP_CITY_COUNTRY_CODE $geoip_city_country_code; fastcgi_param GEOIP_CITY_COUNTRY_CODE3 $geoip_city_country_code3; fastcgi_param GEOIP_CITY_COUNTRY_NAME $geoip_city_country_name; fastcgi_param GEOIP_REGION $geoip_region; fastcgi_param GEOIP_CITY $geoip_city; fastcgi_param GEOIP_POSTAL_CODE $geoip_postal_code; fastcgi_param GEOIP_CITY_CONTINENT_CODE $geoip_city_continent_code; fastcgi_param GEOIP_LATITUDE $geoip_latitude; fastcgi_param GEOIP_LONGITUDE $geoip_longitude; haproxy.conf (frontend machine) defaults log global option forwardfor option httpclose mode http retries 3 option redispatch maxconn 4096 contimeout 100000 clitimeout 100000 srvtimeout 100000 listen cluster_webs *:8080 mode http option tcpka option httpchk option httpclose option forwardfor balance roundrobin server backend-stage 10.5.0.11:80 weight 1 $_SERVER dump: http://paste.laravel.com/7dy Where 10.5.0.10 is frontend private ip and 10.5.0.11 backend private ip

  Read the article

• How to set up a centralized backup server with lots of offsite workstations, intermittent internet connectivity, and stubborn users?

  - by Zac B

  This might be an impossible question. Context: We have a bunch of computers across around 1000 users. We have a centralized office where 900 of the users work, most of the time. Most of the computers are laptops. They are very frequently coming on and off the network for hours at a time. Users often take their computers home and do lots of work from home. In addition, there are a handful of users who work elsewhere in the country, who are offline (no internet connection whatsoever) for more than half of the time they use their machines. All of the machines are Windows 7/XP. Problem: People are always losing data. One day someone accidentally deletes a bunch of files. The next day someone else installs a bad driver or tries to mess with something in system32 and needs a personal data backup/reinstall of Windows. Because of how many of our business operations are done without an internet connection, and how frequently computers come on- and offline, it's unfeasible to make users use network storage for all of their data. We tried giving them Dropboxes, and they stored their files elsewhere. We bought and deployed Altiris, and they uninstalled it and blamed us when they couldn't get files back that they accidentally deleted while they were offline and hadn't taken a backup in months. We tried teaching them backup best-practices, and using scheduled sync tools to upload things to the network drives, and they turned them off because they "looked like viruses". It doesn't help that many of these users are pretty high up in the business and are not amicable to any sort of "you need to do something regularly because we say so" solution. Question: Other than finding another job where IT is treated differently and users are willing to follow best practices, how would people recommend I implement a file backup solution that supports the following: Backs up to a centralized server over LAN or WAN whenever a network link becomes available, or on a schedule. Supports interrupted/resumed backups (and hopefully file-delta only backups), since connections to the network (WAN or LAN) are often slow and only open for half an hour or so. Supports relatively rapid, "I accidentally deleted the TPS reports! Oh no!" single-file recovery, ideally administered from the central backup server rather than the client PC. Supports local-to-local file delta backup on a schedule, so that users without a network connection for a few days can still retrieve accidental deletions or whatnot. Ideally, the local stored backups would be pushed up to the server whenever network link is available. Isn't configurable on the clients without certain credentials. Because the CFOs (who won't give up their admin rights on the domain) will disable it if they can. Backs up the entire hard drive. There are people who are self-righteous about storing things in C:\, or in the recycle bin, or in the C:\Windows dir (yes, I know). I'm fine integrating multiple products/solutions, or scripting different programs together myself (I'm a somewhat competent programmer), but I've been drawing a blank on where to start. Dropbox is folder-specific, Altiris doesn't cope with LAN outages or interrupted/resumed backups, Volume Shadow Copy is awesome for a local-to-local solution, but I don't know how to push days of stored shadow copies up to a server in a 2 hour window of network access. The company is fine with spending decent money on this, thousands (USD) on a server, and hundreds on clients, if necessary. I want to emphasize that this isn't a shopping list request. While I wish there was a program out there that did what I want, I've looked pretty hard, and not found anything that fits the bill. Instead, I'm hoping for ideas on where to start hacking things together from scratch/from different technologies to make something stable that works. Cheers!

  Read the article

• How To Activate Your Free Office 2007 to 2010 Tech Guarantee Upgrade

  - by Matthew Guay

  Have you purchased Office 2007 since March 5th, 2010?  If so, here’s how you can activate and download your free upgrade to Office 2010! Microsoft Office 2010 has just been released, and today you can purchase upgrades from most retail stores or directly from Microsoft via download.  But if you’ve purchased a new copy of Office 2007 or a new computer that came with Office 2007 since March 5th, 2010, then you’re entitled to an absolutely free upgrade to Office 2010.  You’ll need enter information about your Office 2007 and then download the upgrade, so we’ll step you through the process. Getting Started First, if you’ve recently purchased Office 2007 but haven’t installed it, you’ll need to go ahead and install it before you can get your free Office 2010 upgrade.  Install it as normal.   Once Office 2007 is installed, run any of the Office programs.  You’ll be prompted to activate Office.  Make sure you’re connected to the internet, and then click Next to activate. Get your Free Upgrade to Office 2010 Now you’re ready to download your upgrade to Office 2010.  Head to the Office Tech Guarantee site (link below), and click Upgrade now. You’ll need to enter some information about your Office 2007.  Check that you purchased your copy of Office 2007 after March 5th, select your computer manufacturer, and check that you agree to the terms. Now you’re going to need the Product ID number from Office 2007.  To find this, open Word or any other Office 2007 application.  Click the Office Orb, and select Options on the bottom. Select the Resources button on the left, and then click About. Near the bottom of this dialog, you’ll see your Product ID.  This should be a number like: 12345-123-1234567-12345   Go back to the Office Tech Guarantee signup page in your browser, and enter this Product ID.  Select the language of your edition of Office 2007, enter the verification code, and then click Submit. It may take a few moments to validate your Product ID. When it is finished, you’ll be taken to an order page that shows the edition of Office 2010 you’re eligible to receive.  The upgrade download is free, but if you’d like to purchase a backup DVD of Office 2010, you can add it to your order for $13.99.  Otherwise, simply click Continue to accept. Do note that the edition of Office 2010 you receive may be different that the edition of Office 2007 you purchased, as the number of editions has been streamlined in the Office 2010 release.  Here’s a chart you can check to see what edition you’ll receive.  Note that you’ll still be allowed to install Office on the same number of computers; for example, Office 2007 Home and Student allows you to install it on up to 3 computers in the same house, and your Office 2010 upgrade will allow the same. Office 2007 Edition Office 2010 Upgrade You’ll Receive Office 2007 Home and Student Office Home and Student 2010 Office Basic 2007Office Standard 2007 Office Home and Business 2010 Office Small Business 2007Office Professional 2007Office Ultimate 2007 Office Professional 2010 Office Professional 2007 AcademicOffice Ultimate 2007 Academic Office Professional Academic 2010 Sign in with your Windows Live ID, or create a new one if you don’t already have one. Enter your name, select your country, and click Create My Account.  Note that Office will send Office 2010 tips to your email address; if you don’t wish to receive them, you can unsubscribe from the emails later.   Finally, you’re ready to download Office 2010!  Click the Download Now link to start downloading Office 2010.  Your Product Key will appear directly above the Download link, so you can copy it and then paste it in the installer when your download is finished.  You will additionally receive an email with the download links and product key, so if your download fails you can always restart it from that link. If your edition of Office 2007 included the Office Business Contact Manager, you will be able to download it from the second Download link.  And, of course, even if you didn’t order a backup DVD, you can always burn the installers to a DVD for a backup.   Install Office 2010 Once you’re finished downloading Office 2010, run the installer to get it installed on your computer.  Enter your Product Key from the Tech Guarantee website as above, and click Continue. Accept the license agreement, and then click Upgrade to upgrade to the latest version of Office.   The installer will remove all of your Office 2007 applications, and then install their 2010 counterparts.  If you wish to keep some of your Office 2007 applications instead, click Customize and then select to either keep all previous versions or simply keep specific applications. By default, Office 2010 will try to activate online automatically.  If it doesn’t activate during the install, you’ll need to activate it when you first run any of the Office 2010 apps.   Conclusion The Tech Guarantee makes it easy to get the latest version of Office if you recently purchased Office 2007.  The Tech Guarantee program is open through the end of September, so make sure to grab your upgrade during this time.  Actually, if you find a great deal on Office 2007 from a major retailer between now and then, you could also take advantage of this program to get Office 2010 cheaper. And if you need help getting started with Office 2010, check out our articles that can help you get situated in your new version of Office! Link Activate and Download Your free Office 2010 Tech Guarantee Upgrade Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideCenter Pictures and Other Objects in Office 2007 & 2010Change the Default Color Scheme in Office 2010Show Two Time Zones in Your Outlook 2007 Calendar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide

  Read the article

• Getting Started with Boxee

  - by DigitalGeekery

  Boxee is a free Media PC application that runs on Windows, Mac, and Ubuntu Linux. With Boxee, you can integrate online video, music and pictures, with your own local media and social networking. Today we are going to take a closer look at Boxee and some of it’s features. Note: We used Windows 7 for this tutorial. Your experience on a Mac or Ubuntu Linux build may vary slightly. Hardware Requirements x86 (Intel/AMD processor) based system running at 1.0GHz or greater 512MB system memory (RAM) or more Video card capable of OpenGL 1.4, Direct X 9.0 Software Requirements Mac OS X 10.4+ (Intel based processor) Ubuntu Linux 9.04+ x86 only Windows XP / Vista / 7 (64 bit in Vista or 7) Installing Boxee Before downloading and installing Boxee, you’ll need to register for a free account. (See link below) Once your account is registered and verified, you’ll be able to log in and download the application. Installation is pretty straightforward…just take the defaults. Boxee will open in full screen mode and you’ll be prompted to login with your username and password. Before you login, you may want to take a moment to click on the “Guide” icon and learn a bit about navigating in Boxee. Some basic keyboard navigation is as follows. Move right, left, up, & down with the arrow keys. Hit “Enter” to make a selection, the forward slash key “\” to toggle between full screen and windowed mode, and “Esc” to go back to the previous screen. For Playback, the volume is controlled by plus & minus (+/-) keys, you can Play / Pause using the spacebar, and skip using the arrow keys. Boxee will also work with any infrared remote. If you have an iPhone or iPod Touch you can download software to enable them as a Boxee remote. If you’re using a mouse and keyboard, hover over the username and password boxes to enter your login credentials. If using a a remote, click your OK button and enter credentials with the on screen keyboard. Click “Done” when finished.   When you are ready to login, enter your credentials and click “Login.” On first login, you’ll be prompted to calibrate your screen. If you choose “Skip” you can always calibrate your screen later under Settings > Appearance > Screen. When Boxee opens, you’ll be greeted by the Home screen. To the left will be your Feeds. This will be any recommended content from friends on Boxee, and social networks such as Facebook and Twitter. Although, when you first login, it will mainly be info from the Boxee staff. You’ll have “Featured” content in the center and your Queue on the right. You’ll also have the Menu along the top.   Pop Up Menu The Pop Menu can be accessed by hitting the “Esc” key, or back on your remote. Depending on where you are located in Boxee, you may have to hit it a few time to “back out” to the Pop Up menu. From the Pop Up Menu, you can easily access any of the resources, settings, and favorites. Queue The Queue is your playlist of TV shows, movies, or Internet videos you wish to watch. When you find an offering you’d like to watch, select it and then click “Add to Queue.” The selected item will be added to your Queue and can be accessed at any time from the Menu. TV Show Library The TV Show library can contain files from your local hard drive or streaming content from the Web. Boxee pulls content from a variety of online locations such as Hulu and TV network sites. Click on the show to see which specific episodes are currently available. To search for your favorite shows, click on the yellow arrow to the left, or navigate to the left with your keyboard or remote. Enter your selection into the search box. My Apps By default, the “My Apps” section includes a list of the most popular apps, such as Netflix, Pandora, YouTube, and others. You can remove Apps from “My Apps,” or add new Apps from the Apps Library.   To access all the available Apps, click on the left arrow button, or click on the yellow arrow at the left, then select “App Library.” Choose an App from the Library and click it to open… … and then select “Add to My Apps.” Or, you can click start to play the App if you don’t wish to Add it to your “My Apps.”   Music, Pictures, and Movies Boxee will scan your PC for movies, pictures, and music. You can choose to scan specific folders by clicking on “Scan Media Folders…” … or from the Pop Up Menu, selecting Settings > Media, and then browsing for your media.   Conclusion Boxee to be a great way to integrate your local media with online streaming content. It can be run as an application on your home PC, or as a stand alone media PC. It should also be noted, however, that your access to online content will vary depending on your country. If you are a Windows Media Center user and and want to add the additional features of Boxee, check out our article on integrating Boxee with Windows 7 Media Center. Download Boxee Similar Articles Productive Geek Tips Integrate Boxee with Media Center in Windows 7Disable Fast User Switching on Windows XPOops! Sorry About the Feed ErrorsDisplay a list of Started Services from the Command Line (Windows)Feedburner to Google: Worst Transition Ever. TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• AutoMapper MappingFunction from Source Type of NameValueCollection

  - by REA_ANDREW

  I have had a situation arise today where I need to construct a complex type from a source of a NameValueCollection.  A little while back I submitted a patch for the Agatha Project to include REST (JSON and XML) support for the service contract.  I realized today that as useful as it is, it did not actually support true REST conformance, as REST should support GET so that you can use JSONP from JavaScript directly meaning you can query cross domain services.  My original implementation for POX and JSON used the POST method and this immediately rules out JSONP as from reading, JSONP only works with GET Requests. This then raised another issue.  The current operation contract of Agatha and one of its main benefits is that you can supply an array of Request objects in a single request, limiting the about of server requests you need to make.  Now, at the present time I am thinking that this will not be the case for the REST imlementation but will yield the benefits of the fact that : The same Request objects can be used for SOAP and RST (POX, JSON) The construct of the JavaScript functions will be simpler and more readable It will enable the use of JSONP for cross domain REST Services The current contract for the Agatha WcfRequestProcessor is at time of writing the following: [ServiceContract] public interface IWcfRequestProcessor { [OperationContract(Name = "ProcessRequests")] [ServiceKnownType("GetKnownTypes", typeof(KnownTypeProvider))] [TransactionFlow(TransactionFlowOption.Allowed)] Response[] Process(params Request[] requests); [OperationContract(Name = "ProcessOneWayRequests", IsOneWay = true)] [ServiceKnownType("GetKnownTypes", typeof(KnownTypeProvider))] void ProcessOneWayRequests(params OneWayRequest[] requests); }   My current proposed solution, and at the very early stages of my concept is as follows: [ServiceContract] public interface IWcfRestJsonRequestProcessor { [OperationContract(Name="process")] [ServiceKnownType("GetKnownTypes", typeof(KnownTypeProvider))] [TransactionFlow(TransactionFlowOption.Allowed)] [WebGet(UriTemplate = "process/{name}/{*parameters}", BodyStyle = WebMessageBodyStyle.WrappedResponse, ResponseFormat = WebMessageFormat.Json)] Response[] Process(string name, NameValueCollection parameters); [OperationContract(Name="processoneway",IsOneWay = true)] [ServiceKnownType("GetKnownTypes", typeof(KnownTypeProvider))] [WebGet(UriTemplate = "process-one-way/{name}/{*parameters}", BodyStyle = WebMessageBodyStyle.WrappedResponse, ResponseFormat = WebMessageFormat.Json)] void ProcessOneWayRequests(string name, NameValueCollection parameters); }   Now this part I have not yet implemented, it is the preliminart step which I have developed which will allow me to take the name of the Request Type and the NameValueCollection and construct the complex type which is that of the Request which I can then supply to a nested instance of the original IWcfRequestProcessor  and work as it should normally.  To give an example of some of the urls which you I envisage with this method are: http://www.url.com/service.svc/json/process/getweather/?location=london http://www.url.com/service.svc/json/process/getproductsbycategory/?categoryid=1 http://www.url.om/service.svc/json/process/sayhello/?name=andy Another reason why my direction has gone to a single request for the REST implementation is because of restrictions which are imposed by browsers on the length of the url.  From what I have read this is on average 2000 characters.  I think that this is a very acceptable usage limit in the context of using 1 request, but I do not think this is acceptable for accommodating multiple requests chained together.  I would love to be corrected on that one, I really would but unfortunately from what I have read I have come to the conclusion that this is not the case. The mapping function So, as I say this is just the first pass I have made at this, and I am not overly happy with the try catch for detecting types without default constructors.  I know there is a better way but for the minute, it escapes me.  I would also like to know the correct way for adding mapping functions and not using the anonymous way that I have used.  To achieve this I have used recursion which I am sure is what other mapping function use. As you do have to go as deep as the complex type is. public static object RecurseType(NameValueCollection collection, Type type, string prefix) { try { var returnObject = Activator.CreateInstance(type); foreach (var property in type.GetProperties()) { foreach (var key in collection.AllKeys) { if (String.IsNullOrEmpty(prefix) || key.Length > prefix.Length) { var propertyNameToMatch = String.IsNullOrEmpty(prefix) ? key : key.Substring(property.Name.IndexOf(prefix) + prefix.Length + 1); if (property.Name == propertyNameToMatch) { property.SetValue(returnObject, Convert.ChangeType(collection.Get(key), property.PropertyType), null); } else if(property.GetValue(returnObject,null) == null) { property.SetValue(returnObject, RecurseType(collection, property.PropertyType, String.Concat(prefix, property.PropertyType.Name)), null); } } } } return returnObject; } catch (MissingMethodException) { //Quite a blunt way of dealing with Types without default constructor return null; } }   Another thing is performance, I have not measured this in anyway, it is as I say the first pass, so I hope this can be the start of a more perfected implementation.  I tested this out with a complex type of three levels, there is no intended logical meaning to the properties, they are simply for the purposes of example.  You could call this a spiking session, as from here on in, now I know what I am building I would take a more TDD approach.  OK, purists, why did I not do this from the start, well I didn’t, this was a brain dump and now I know what I am building I can. The console test and how I used with AutoMapper is as follows: static void Main(string[] args) { var collection = new NameValueCollection(); collection.Add("Name", "Andrew Rea"); collection.Add("Number", "1"); collection.Add("AddressLine1", "123 Street"); collection.Add("AddressNumber", "2"); collection.Add("AddressPostCodeCountry", "United Kingdom"); collection.Add("AddressPostCodeNumber", "3"); AutoMapper.Mapper.CreateMap<NameValueCollection, Person>() .ConvertUsing(x => { return(Person) RecurseType(x, typeof(Person), null); }); var person = AutoMapper.Mapper.Map<NameValueCollection, Person>(collection); Console.WriteLine(person.Name); Console.WriteLine(person.Number); Console.WriteLine(person.Address.Line1); Console.WriteLine(person.Address.Number); Console.WriteLine(person.Address.PostCode.Country); Console.WriteLine(person.Address.PostCode.Number); Console.ReadLine(); }   Notice the convention that I am using and that this method requires you do use.  Each property is prefixed with the constructed name of its parents combined.  This is the convention used by AutoMapper and it makes sense. I can also think of other uses for this including using with ASP.NET MVC ModelBinders for creating a complex type from the QueryString which is itself is a NameValueCollection. Hope this is of some help to people and I would welcome any code reviews you could give me. References: Agatha : http://code.google.com/p/agatha-rrsl/ AutoMapper : http://automapper.codeplex.com/   Cheers for now, Andrew   P.S. I will have the proposed solution for a more complete REST implementation for AGATHA very soon. 

  Read the article

• 2 Days of Share &amp; Point

  - by Mark Rackley

  Groovy man… SharePoint Saturday Ozarks is back for 2010, bigger and better than before. Join us for a far out time and learn more about SharePoint in one day than you could in a year from the man… Yes! SharePoint Saturday Ozarks is back! SharePoint Saturday Ozarks is the largest SharePoint conference in Arkansas, Southern Missouri, and the very north east tip of Oklahoma. Last year we had a great turn out with 20 speakers, 5 MVPs, and attendees coming from Arkansas, Texas, Oklahoma, Missouri, Kansas, Nebraska, Indiana, Ohio, Alabama, Michigan, and Washington. Hey Man… what’s SharePoint Saturday anyway? Sounds like a conspiracy man… Not to worry, SharePoint Saturday is not an arm of the government bent on mind control or any attempt what-so-ever to bring you down man. SharePoint Saturday is grass roots effort started by Michael Lotter (http://www.sharepointsaturday.org/pages/about.aspx). It is a FREE one day event where the best SharePoint speakers gather to present their love, hatred, and frustrations of SharePoint to those lucky individuals who attend. Lessons are learned, contacts are made, prizes are won, food is eaten, assorted beverages are consumed until wee hours of the morning. SharePoint Saturday started with just a few sporadic one day events here and there. However, over the past year SharePoint Saturday has exploded and it’s hard to find a weekend where there is NOT a SharePoint Saturday event happing in some corner of the globe. There are even occasions where there are two SharePoint Saturdays on the same day! Many people are pleasantly surprised at the caliber of speakers at these SharePoint Saturday events. For the most part, these speakers are more eloquent, practiced, and practical than those speakers you find at the major multi-day conferences. These guys aren’t even paid to speak.. they do it out of love man… SharePoint Saturday Ozarks 2009 Alumni We had a star studded cast last year with many returning this year! Just check out the fun that they had… John Ferringer – Admin rockstar… I can still sense the awesomeness   SharePoint poster children Mike Watson & Laura Rogers     Lori Gowin spreading the SharePoint Love Eric Shupps is a little bit country and a little bit rock and roll       Cathy Dew, Sean McDonough, and JD Wade relaxing between gigs Actually, you can see real photos from last year’s SharePoint Saturday ozarks here:  picasaweb.google.com/mrackley/SharePointSaturdayOzarks#    What’s new for SharePoint Saturday Ozarks 2010 SharePoint Saturday Ozarks 2010 will totally blow your mind man. We’re getting the band back to together with many returning speakers and few new faces. Joel Oleson will be speaking this year, maybe he’ll grace us with his song stylings. Sadly, once again, Andrew Connell will not be able to attend SharePoint Saturday Ozarks, however he did feel the need to show his support in his own way. Prizes this year currently include books, software, a Zune HD, and much more! Wait Man… You said 2 days? I thought it was a one day event? Correct you are my herbal smelling friend… SharePoint Saturday Ozarks 2010 will spread the love an additional day this year. The first day will be all about the SharePoint love, on day 2 we will be taking a leisurely float down the Buffalo National River for those interested in a truly unique experience (no banjos allowed please).   Here are the details: WHAT 4 – 5 hour float down the Buffalo National River WHEN & WHERE Sunday June 13th. We will be leaving at 10am from the Parking Lot of: Gordon’s Motel & Canoe Rental Old Highway 7 Jasper, AR 72641 (870) 446-5252 Jasper is about 30 minutes south of Harrison, AR on Highway 7 South. You are responsible for bumming a ride to/from Gordon’s Motel, but they will be shuttling us to/from the river and providing canoes and a boxed lunch. WHAT ELSE? The float trip is dependent on the weather of course, we won’t be floating down the river in a thunderstorm, however I planned SPS Ozarks around a time of year ideal for floating. We aren’t talking class 5 rapids here, you don’t need any real skill, but you need to be okay with possibly tipping your canoe over once or twice. You can bring your own assorted beverages with you, but glass containers are not allowed on the river. I suggest a small cooler with extra snacks and drinks. Also bring clothing you can get wet in (these SharePoint people can get ornery). HOW DO I SIGN UP? When you register for SharePoint Saturday Ozarks, you will have the option to also sign up for the float trip. Seats are limited though! If you do not intend to go, please do not take someone else’s place.  The cost for the float trip will be about $35 dollars per person (which you are responsible for unless we find a sponsor). The price includes shuttle to/from river, canoe, life jackets, paddles, and boxed lunch. Far out man… how do I register??? You can register for SharePoint Saturday Ozarks by going to http://spsozarks.eventbrite.com/ We are limited to 200 people for the conference and 50 people for the float trip, so register today before we are sold out. Lodging for SharePoint Saturday Ozarks will once again take place at the Hotel Seville: Annex Suites are available for $103.20 This is So Groovy.. How can I help? I’m glad you asked! We are still looking for a few sponsors and one or two more speakers. If you are interested please let me know!  You can find out more information at http://www.sharepointsaturday.org/ozarks Hey… wait a minute…. what exactly IS SharePoint man??? Come to SharePoint Saturday Ozarks and find out!!  See you guys there!

  Read the article

• Building services with the .NET framework Cont’d

  - by Allan Rwakatungu

  In my previous blog I wrote an introductory post on services and how you can build services using the .NET frameworks Windows Communication Foundation (WCF) In this post I will show how to develop a real world application using WCF The problem During the last meeting we realized developers in Uganda are not so cool – they don’t use twitter so may not get the latest news and updates from the technology world. We also noticed they mostly use kabiriti phones (jokes). With their kabiriti phones they are unable to access the twitter web client or alternative twitter mobile clients like tweetdeck , twirl or tweetie. However, the kabiriti phones support SMS (Yeeeeeeei). So what we going to do to make these developers cool and keep them updated is by enabling them to receive tweets via SMS. We shall also enable them to develop their own applications that can extend this functionality Analysis Thanks to services and open API’s solving our problem is going to be easy.  1. To get tweets we can use the twitter service for FREE 2. To send SMS we shall use www.clickatell.com/ as they can send SMS to any country in the world. Besides we could not find any local service that offers API's for sending SMS :(. 3. To enable developers to integrate with our application so that they can extend it and build even cooler applications we use WCF. In addittion , because connectivity might be an issue we decided to use WCF because if has a inbuilt queing features. We also choose WCF because this is a post about .NET and WCF :). The Code Accessing the tweets To consume twitters REST API we shall use the WCF REST starter kit. Like it name indicates , the REST starter kit is a set of .NET framework classes that enable developers to create and access REST style services ( like the twitter service). Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Http; using System.Net; using System.Xml.Linq;   namespace UG.Demo {     public class TwitterService     {         public IList<TwitterStatus> SomeMethodName()         {             //Connect to the twitter service (HttpClient is part of the REST startkit classes)             HttpClient cl = new HttpClient("http://api.twitter.com/1/statuses/friends_timeline.xml");             //Supply your basic authentication credentials             cl.TransportSettings.Credentials = new NetworkCredential("ourusername", "ourpassword");             //issue an http             HttpResponseMessage resp = cl.Get();             //ensure we got reponse 200             resp.EnsureStatusIsSuccessful();             //use XLinq to parse the REST XML             var statuses = from r in resp.Content.ReadAsXElement().Descendants("status")                            select new TwitterStatus                            {                                User = r.Element("user").Element("screen_name").Value,                                Status = r.Element("text").Value                            };             return statuses.ToList();         }     }     public class TwitterStatus     {         public string User { get; set; }         public string Status { get; set; }     } }  Sending SMS Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} public class SMSService     {         public void Send(string phone, string message)         {                         HttpClient cl1 = new HttpClient();              //the clickatell XML format for sending SMS             string xml = String.Format("<clickAPI><sendMsg><api_id>3239621</api_id><user>ourusername</user><password>ourpassword</password><to>{0}</to><text>{1}</text></sendMsg></clickAPI>",phone,message);             //Post form data             HttpUrlEncodedForm form = new HttpUrlEncodedForm();             form.Add("data", xml);             System.Net.ServicePointManager.Expect100Continue = false;             string uri = @"http://api.clickatell.com/xml/xml";             HttpResponseMessage resp = cl1.Post(uri, form.CreateHttpContent());             resp.EnsureStatusIsSuccessful();         }     }

  Read the article

• Building Great-Looking, Usable Apps: A two-day workshop applying Oracle’s best UX practices in ADF

  - by mvaughan

  By Misha Vaughan, Oracle Applications User ExperienceI have been with Oracle for more than 12 years. It is a company that has granted me extraordinary creative freedom to help deliver compelling experiences for customers.I am beyond proud to talk about one of the experiences we just took for a test drive. Recently, we delivered a first-of-its-kind, three-team collaboration, train-the-trainer event in Reading, U.K., on building great-looking, usable apps based on Oracle Fusion Applications -- using the ADF tool kit. A new kind of workshopKevin Li, Platform Product Director, asked the Oracle Applications User Experience VP, Jeremy Ashley, if the team had anything to help partners and customers build applications that looked like Fusion. He was receiving this request from European partners and customers.Some quick conversations ensued, and the idea for the workshop was born: We would conduct an experiment.  We would work with feedback from the key Platform Technology Solutions (PTS) trainers under Andre Pavanello, Director, Platform Technology Solutions, in Europe, Middle East, and Africa. We would partner with the ADF team lead by Grant Ronald, Director of Product Management, title> and leverage the Applications UX expertise in Ashley’s team.The goal: Create a pilot workshop that in two days would explain to an ADF developer how to leverage the next-generation user experience best-practices developed for Fusion Apps. Why? Customers who need integrations with Oracle Fusion Applications, who are looking for custom applications that need to co-exist with Fusion, or who quite simply want a next-generation design for a custom app, need their solutions to reflect the next-generation research and design.Building an event for an ADF developerThe biggest hurdle was figuring out where to start.  How far into user experience country do you take an ADF developer? How far into ADF do you need to go if you are a UX professional?After some time in the UX kitchen, the workshop recipe looked like this: Mix equal parts: Fusion user experience design principles and functional design patterns The art and science behind UX How to wireframe designs that you can build in Fusion How to translate those designs into an ADF application Ultan O’Broin, Director of Global User Experience, explaining the trouble ticket wireframe design exerciseLynn Munsinger, Senior Group Product Manager, explaining the follow-on trouble ticket ADF coding exercise For spice, add:•    Debra Lilley, Fujitsu and ACE director, showcasing some of the latest ADF design work in the new face of Fusion Applications •    Partner show-and-tell of example apps they have built with FMW and ADF that are dynamic, beautiful, and interactive.Debra Lilley, Oracle ACE Director and Fujitsu Fusion Champion on the new face of Fusion built with ADF and Fusion extensibility with composers as a window into “the possible”?The taste testThis first go-round of the workshop was aimed squarely at ADF developers and partners.  We were privileged to have participation and feedback from:•    Sten Vesterli, Scott/Tiger S. A., Denmark•    John Sim, Fishbowl Solutions, UK•    Josef Huber, Primus Delphi Group, Munich•    Thaddaus Weindl, Primus Delphi, Group , Munich•    Praveen Pillalamarri, EiS Technologies, Bangalore•    Balaji Kamepalli, EiS Technologies, Bangalore•    Plinio Arbizu, Services & Processes Solutions S. A., Mexico•    Yannick Ongena, infoMENTUM, UK•    Jakub Ciszek, infoMENTUM, UK•    Mauro Flores, infoMENTUM, UK•    Matteo Formica, infoMENTUM, UKRichard Bingham, Oracle, Mauro Flores and Matteo Formica, infoMENTUMWhy is this so exciting?  Oracle has invested heavily in the research and development of the Oracle Fusion Applications user experience. This investment has been and continues to be applied across the product lines. Now, we finally get to teach customers and partners how to take advantage of this investment for custom solutions.This event was a pilot to test-drive the content, as well as a train-the-trainer event that our EMEA colleagues will be using with partners who want to build with Fusion Apps design patterns.What did attendees think?"I liked most the science stuff, like eye-tracking, design patterns and best-practice (color, contrast),” Josef Huber said. “It was a very good introduction to UI design, and most developers and project managers are very bad in that.  So this course would be good for all developers and even project managers." Team Anonymous: John Sim, Fishbowl Solutions, Flavius Sana, Oracle, Josef Huber, infoMENTUM, Mireille Duroussaud, Oracle. Winners of the wireframing design exercise.  Sten Vesterli, of Scott/Tiger, said he attended to learn techniques he could use in his own projects. He wants to ensure that his applications better meet the needs of his users, and he said sessions during the workshop on user interface design and wireframing were most useful to him.  “Go to this event to learn the art and science of good user interfaces from people who really know how to do it,” he said.Sten Vesterli, Scott/Tiger, Angelo Santagata, Oracle Plinio Arbizu said the workshop fulfilled his goals, thanks to the recommendations given in how to design user interfaces to facilitate the adoption of applications among the final users. “The workshop combined these recommendations with an exercise that improved the technical comprehension, permitting the usage of JDeveloper to set forth our solutions,” he said. He added: “The first session that I really enjoyed was the five Fusion design principles. It was incredible to discover how these simple principles were included in an inherit manner in Fusion Applications, and I had been using many of them applying only ADF components.  Another topic that I enjoyed a lot was the eight recommendations about the visual design of UIs. The issues that were raised in that lesson are unknown to the developers and of great value to achieve an attractive presentation layer to the end users.  Participate in this workshop, and include these usability features in your projects and in this manner not only to facilitate and improve the user productivity, but also to distinguish you as a professional who takes advantage fully of the functionalities offered by Oracle technology. Praveen Pillalamarri came to the workshop to learn about the difficulties faced in UI and UX development, and how this can be resolved with the help of ADF.  He also appreciated the opportunity to talk with other individuals who came to the workshop. Pillalmarri said, “The way we looked at things in terms of work and projects were sharpened.  UI and UX design knowledge shared by you was quite interesting, especially the minute things which we ignored in the UI or UX design.” Plinio Arbizu, Services & Processes Solutions S. A., Richard Bingham, Oracle, Balaji Kamepalli, & Praveen Pillalamarri, EiS TechnologiesReady to spread the wordIn EMEA, Oracle customers and partners have access to three world-class trainers via Platform Technology Solutions: Mireille Duroussaud, Flavius Sana, and Angelo Santagata. Contact Andre Pavanello if you like to experience this workshop firsthand, or you have customers or partners who would benefit from the training.We are looking to bring the event to the U.S. in spring 2013. If you have interest in this kind of a workshop, leave a comment below. For those who want to follow the action, join the ADF Enterprise Methodology Group run by Oracle’s Chris Muir. Ask questions and continue with the conversation in this forum, or check blogs.oracle.com/usableapps for topics emerging from the workshop.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75  | Next Page >