Search Results

Search found 5756 results on 231 pages for 'cpu utilization'.

Page 70/231 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

  • High temperature on my laptop with Radeon Mobility HD4670

    - by Lorthirk
    As almost everyone here, I guess, in these days I downloaded Quantal Quetzal to give it a try. However I noticed that my laptop runs fairly hot with cooling fans almost always on, even sitting in the desktop doing nothing. I downloaded XSensor to read temperature sensors, and I saw that while CPU stays on about 65°C, so quiet normal I guess, the GPU sits at 75°C. In comparison my actual Windows 7 installation, which dual boots witb Quantal, stays at 59°C CPU and 65°C. So I went reading and learned that AMD dropped support for my video card from fglrx package, and that fglrx-legacy won't support 1.13 Xorg, so I'm basically stuck with OSS drivers. So I was guessing if there's anything I can try, and if it's possible that the OSS drivers could be the cause of the high temperature?

    Read the article

  • Make public webcam. Which protocol, which codec. (Using VLC)

    - by gsedej
    Hi! I want to use my old (1GHz) PC as webcam video stream server (like you can see those road cameras). I thought of using VLC and already tried using http output but it was not really good. Too cpu hungry, too big stream (kBps), not stable... I been reading VLC how-to's but thre is still a question. Which output should I use? Http, RTSP, UDP? I want to make for more than one computer at the same time (multicast). Which codec should be good? PC is not so fast so it shouldn't be too cpu hungry codec. Mpeg2, mpeg4, xvid? how much video buffer should I use (vb=?)? What about setting IP and ports? So I need some help with ideas, but if someone can make a VLC command line it's even better :) Oh, computer has direct internet connection and own IP.

    Read the article

  • VMWare Player pauses often

    - by pascal
    I'm using a 64bit Windows 8 inside vmplayer, with 2 virtual processor cores, virtual hard disk resides on a fast local disc and is not preallocated; host CPU is Intel i7 3770, should be capable of hardware virtualisation but I don't know if VMWare uses it; NAT networking; Sound card connected, USB connected, accelerated 3D graphics (NVidia 313.30 on host) My problem is, that the VM often pauses for a few seconds, and then speeds up for a few seconds to reach real time again. Time in the VM actually moves faster after the pause, for example all animations using timers speed up. When running, the vmware-vmx process shows ~150% CPU usage in top, but 0% when pausing (and D state i.e. waiting for IO). iotop shows normal disk writes from vmware-vmx threads, but during pauses, the flush kernel thread uses 99%. Are there some options to try so that VMWare doesn't wait for IO? I've tried a few things available from the GUI but the issue never went away…

    Read the article

  • Macbook 8.1 overheating

    - by timse201
    I have a macbook 8.1 with ubuntu 12.04 installed. But my cpu is getting very hot. On Mac my CPU is 50-60°C warm. But on ubuntu my mac is getting very hot and is by about 60°C but with min 3000rpm instead of 2000 on mac and the fan is getting very loud with 4500rpm on ubuntu when im browsing (without flash) or doing something else. i set it to 3000rpm because it is not getting so noisy instead of 2000rpm minimum. But thats not that what im expected. What ive done: i installed lm-sensors to see the temperatures and started the sensors-detect i installed macfancld, jupiter, the newest drivers from x-updates and installed the i965-va-driver oh and i installed mesa - with the default version my sandbridge was displayed as unknown i added GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force drm.vblankoffdelay=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1" ive added rfkill block bluetooth to /etc/rc.local to switch of bluetooth by default on boot my mac is not as noisy as before but it is noisy and sometimes very hot i hope you can help me

    Read the article

  • How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

    - by cfogelberg
    This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

    Read the article

  • vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

    - by ewwhite
    VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

    Read the article

  • How to debug slow session start of Gnome 3?

    - by user65521
    After Upgrade from 11.10 to 12.04, the login process of Gnome 3 is extremely slow (It takes in the order of 60 seconds when it was in the order of a few seconds before the upgrade (Harddisk is a SSD!)). Running "top" in a VT shows that gnome-shell is producing about 90% CPU load while dbus-daemon is taking roughly 10%. The moment when CPU-load of gnome-shell drops to normal levels (around 2-3%) corresponds to the time the login process is terminated and the desktop is displayed. De-activating the four gnome-shell extensions (Alternative Status Menu, Quit Button, Remove Accessibility, system-monitor) that I have installed does not have any effect on session start up time. Login to Gnome classic does not show the slow session start. The system logs do not show anything suspicious. Thus, what is the best way to identify the underlying problem?

    Read the article

  • Logic - Time measurement

    - by user73384
    To measure the following for tasks- Last execution time and maximum execution time for each task. CPU load/time consumed by each task over a defined period informed by application at run time. Maximum CPU load consumed by each task. Tasks have following characteristics- First task runs as background – Event information for entering only Second task - periodic – Event information for entering and exiting from task Third task is interrupt , can start any time – no information available from this task Forth task highest priority interrupt , can start any time – Event information for entering and exiting from task Should use least possible execution time and memory. 32bit increment timer available for time counting. Lets prepare and discuss the logic, It’s OK to have limitations …! Questions on understanding problem statement are welcome

    Read the article

  • Getting current time in milliseconds

    - by user90293423
    How to get the current time in milliseconds? I'm working on a hacking simulation game and when ever someone connects to another computer/NPC, a login screen popups with a button on the side called BruteForce. When BruteForce is clicked, what i want the program to do is, calculate how many seconds cracking the password is going to take based on the player's CPU speed but that's the easy part. The hard part is i want to enter a character in the password's box every X milliseconds based on a TimeToCrack divided by PasswordLength formula. But since i don't know how to find how many milliseconds have elapsed since the second has passed, the program waits until the CurrentTime is higher than the TimeBeforeTheLoopStarted + HowLongItTakesToTypeaCharacter which is always going to be a second. How would you handle my problems? I've commented the game breaking part. std::vector<QString> hardware = user.getHardware(); QString CPU = hardware[0]; unsigned short Speed = 0; if(CPU == "OMG SingleCore 1.8GHZ"){ Speed = 2; } const short passwordLength = password.length(); /* It's equal to 16 */ int Time = passwordLength / Speed; double TypeSpeed = Time / passwordLength; time_t t = time(0); struct tm * now = localtime(&t); unsigned short EndTime = (now->tm_sec + Time) % 60; unsigned short CurrentTime = 0; short i = passwordLength - 1; do{ t = time(0); now = localtime(&t); CurrentTime = now->tm_sec; do{ t = time(0); now = localtime(&t); }while(now->tm_sec < CurrentTime + TypeSpeed); /* Highly flawed */ /* Do this while your integer value is under this double value */ QString tempPass = password; tempPass.chop(i); ui->lineEdit_2->setText(tempPass); i--; }while(CurrentTime != EndTime);

    Read the article

  • Oracle Enterprise Manager 12c(EM12c):????????? ~Exadata??·??~

    - by Kumiko Fujita
    EM?????Exadata?????? Oracle Exadata???????????????????????????Oracle Enterprise Manager 12c????????????Oracle Exadata??????????(Oracle Enterprise Manager 11g)????????????12c???????????????????????????Exadata Storage Server?InfiniBand???????????????????????? Exadata??·?? ??????? 1. ???????????? -Exadata??????????????????????????!- Oracle Enterprise Manager 12c???Oracle Exadata???/????????????????????????????????????????????????????????????????????????????????????????????????? 2. ?????????????????????? -CPU????I/O?????????!- Oracle Exadata???????? 8 ????96?????????·??????????????TB???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????Oracle Enterprise Manager 12c????????????CPU???????????I/O??????????????????????? 3. ????? -????Exadata????????????!- ????Oracle Exadata?????????????????????????????????????Oracle Enterprise Manager 12c????????????????????????????????·??????????Oracle Exadata??????????????????????????Oracle Enterprise Manager?????????????????????????????????????·???????????????????????Oracle Exadata????????????????????????????? ??????? Storage Server ????????griddisk,celldisk ????FlashCache ???? BIOS,IB??????????DB OS??????OS??????? ??????! ?????Exadata Monitoring?(PDF) ?????????(????????????????) WMV MP4

    Read the article

  • ???????????????

    - by Tatsuya Sugi
    ??????????????????? ?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ??????????????????·???????? ??????·????·?????·??????????????????????????????????????????? ???????????/?????? ?????????????? ???????????????????????/?????????????????????????? = ??????? ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ????··· ?????????/????????????? ?????????????(???????)?????????????????????????????? ????????????????????????/???? ????????????????????????????????????????????????????? ??????????????????????????????????????????? ??????????? ????????????????????? ?????????????????? - ?????????????????????????????????????????????????????????????????????????????????????? ?????????????? ?????????????????????? ?????????????? ??????????·????????????????????? Why? Coherence ??????????????????????? ??????????????????? ???????????Coherence?????????????????????????????????????????????????????????????????? ????????CPU??????? ????????????????????????????CPU????????????????????????????????????????????????????????????????????????????? ????????????????????? ????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????(????????????)? ???:????????????????? ????????????????????????????????????????????? 1.????????????????????????????? ???????????????????????????????????????????? 2.?????·?????????????????? ???????????????????????????????????????? 3.???????????(??????)?????? ???????????????????????????????????????????? ??????????????????????????????????? ??????????????????????????????????????

    Read the article

  • Why can I query with an int but not a string here? PHP MySQL Datatypes

    - by CT
    I am working on an Asset Database problem. I receive $id from $_GET["id"]; I then query the database and display the results. This works if my id is an integer like "93650" but if it has other characters like "wci1001", it displays this MySQL error: Unknown column 'text' in 'where clause' All fields in tables are of type: VARCHAR(50) What would I need to do to be able to use this query to search by id that includes other characters? Thank you. <?php <?php /* * ASSET DB FUNCTIONS SCRIPT * */ # connect to database function ConnectDB(){ mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); } # find asset type returns $type function GetAssetType($id){ $sql = "SELECT asset.type From asset WHERE asset.id = $id"; $result = mysql_query($sql) or die(mysql_error()); $row = mysql_fetch_assoc($result); $type = $row['type']; return $type; } # query server returns $result (sql query array) function QueryServer($id){ $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchaseDate ,asset.purchaseOrder ,asset.value ,asset.type ,asset.notes ,server.manufacturer ,server.model ,server.serialNumber ,server.esc ,server.warranty ,server.user ,server.prevUser ,server.cpu ,server.memory ,server.hardDrive FROM asset LEFT JOIN server ON server.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); return $result; } # get server data returns $serverArray function GetServerData($result){ while($row = mysql_fetch_assoc($result)) { $id = $row['id']; $company = $row['company']; $location = $row['location']; $purchaseDate = $row['purchaseDate']; $purchaseOrder = $row['purchaseOrder']; $value = $row['value']; $type = $row['type']; $notes = $row['notes']; $manufacturer = $row['manufacturer']; $model = $row['model']; $serialNumber = $row['serialNumber']; $esc = $row['esc']; $warranty = $row['warranty']; $user = $row['user']; $prevUser = $row['prevUser']; $cpu = $row['cpu']; $memory = $row['memory']; $hardDrive = $row['hardDrive']; $serverArray = array($id, $company, $location, $purchaseDate, $purchaseOrder, $value, $type, $notes, $manufacturer, $model, $serialNumber, $esc, $warranty, $user, $prevUser, $cpu, $memory, $hardDrive); } return $serverArray; } # print server table function PrintServerTable($serverArray){ $id = $serverArray[0]; $company = $serverArray[1]; $location = $serverArray[2]; $purchaseDate = $serverArray[3]; $purchaseOrder = $serverArray[4]; $value = $serverArray[5]; $type = $serverArray[6]; $notes = $serverArray[7]; $manufacturer = $serverArray[8]; $model = $serverArray[9]; $serialNumber = $serverArray[10]; $esc = $serverArray[11]; $warranty = $serverArray[12]; $user = $serverArray[13]; $prevUser = $serverArray[14]; $cpu = $serverArray[15]; $memory = $serverArray[16]; $hardDrive = $serverArray[17]; echo "<table width=\"100%\" border=\"0\"><tr><td style=\"vertical-align:top\"><table width=\"100%\" border=\"0\"><tr><td colspan=\"2\"><h2>General Info</h2></td></tr><tr id=\"hightlight\"><td>Asset ID:</td><td>"; echo $id; echo "</td></tr><tr><td>Company:</td><td>"; echo $company; echo "</td></tr><tr id=\"hightlight\"><td>Location:</td><td>"; echo $location; echo "</td></tr><tr><td>Purchase Date:</td><td>"; echo $purchaseDate; echo "</td></tr><tr id=\"hightlight\"><td>Purchase Order #:</td><td>"; echo $purchaseOrder; echo "</td></tr><tr><td>Value:</td><td>"; echo $value; echo "</td></tr><tr id=\"hightlight\"><td>Type:</td><td>"; echo $type; echo "</td></tr><tr><td>Notes:</td><td>"; echo $notes; echo "</td></tr></table></td><td style=\"vertical-align:top\"><table width=\"100%\" border=\"0\"><tr><td colspan=\"2\"><h2>Server Info</h2></td></tr><tr id=\"hightlight\"><td>Manufacturer:</td><td>"; echo $manufacturer; echo "</td></tr><tr><td>Model:</td><td>"; echo $model; echo "</td></tr><tr id=\"hightlight\"><td>Serial Number:</td><td>"; echo $serialNumber; echo "</td></tr><tr><td>ESC:</td><td>"; echo $esc; echo "</td></tr><tr id=\"hightlight\"><td>Warranty:</td><td>"; echo $warranty; echo "</td></tr><tr><td colspan=\"2\">&nbsp;</td></tr><tr><td colspan=\"2\"><h2>User Info</h2></td></tr><tr id=\"hightlight\"><td>User:</td><td>"; echo $user; echo "</td></tr><tr><td>Previous User:</td><td>"; echo $prevUser; echo "</td></tr></table></td><td style=\"vertical-align:top\"><table width=\"100%\" border=\"0\"><tr><td colspan=\"2\"><h2>Specs</h2></td></tr><tr id=\"hightlight\"><td>CPU:</td><td>"; echo $cpu; echo "</td></tr><tr><td>Memory:</td><td>"; echo $memory; echo "</td></tr><tr id=\"hightlight\"><td>Hard Drive:</td><td>"; echo $hardDrive; echo "</td></tr><tr><td colspan=\"2\">&nbsp;</td></tr><tr><td colspan=\"2\">&nbsp;</td></tr><tr><td colspan=\"2\"><h2>Options</h2></td></tr><tr><td colspan=\"2\"><a href=\"#\">Edit Asset</a></td></tr><tr><td colspan=\"2\"><a href=\"#\">Delete Asset</a></td></tr></table></td></tr></table>"; } ?> __ /* * View Asset * */ # include functions script include "functions.php"; $id = $_GET["id"]; if (empty($id)):$id="000"; endif; ConnectDB(); $type = GetAssetType($id); ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" type="text/css" href="style.css" /> <title>Wagman IT Asset</title> </head> <body> <div id="page"> <div id="header"> <img src="images/logo.png" /> </div> </div> <div id="content"> <div id="container"> <div id="main"> <div id="menu"> <ul> <table width="100%" border="0"> <tr> <td width="15%"></td> <td width="30%%"><li><a href="index.php">Search Assets</a></li></td> <td width="30%"><li><a href="addAsset.php">Add Asset</a></li></td> <td width="25%"></td> </tr> </table> </ul> </div> <div id="text"> <ul> <li> <h1>View Asset</h1> </li> </ul> <?php if (empty($type)):echo "<ul><li><h2>Asset ID does not match any database entries.</h2></li></ul>"; else: switch ($type){ case "Server": $result = QueryServer($id); $ServerArray = GetServerData($result); PrintServerTable($ServerArray); break; case "Desktop"; break; case "Laptop"; break; } endif; ?> </div> </div> </div> <div class="clear"></div> <div id="footer" align="center"> <p>&nbsp;</p> </div> </div> <div id="tagline"> Wagman Construction - Bridging Generations since 1902 </div> </body> </html>

    Read the article

  • apache eats up too much ram per child

    - by mrc4r7m4n
    Hello to everyone. I've got fallowing problem: Apache eat to many ram per child. The fallowing comments shows: cat /etc/redhat-release -- Fedora release 8 (Werewolf) free -m: total used free shared buffers cached Mem: 3566 3136 429 0 339 1907 -/+ buffers/cache: 889 2676 Swap: 4322 0 4322 I know that you will say that there is nothing to worry about because swap is not use, but i think it's not use for now. 3.httpd -v: Server version: Apache/2.2.14 (Unix) 4.httpd -l: Compiled in modules: core.c mod_authn_file.c mod_authn_default.c mod_authz_host.c mod_authz_groupfile.c mod_authz_user.c mod_authz_default.c mod_auth_basic.c mod_include.c mod_filter.c mod_log_config.c mod_env.c mod_setenvif.c mod_version.c mod_ssl.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_cgi.c mod_negotiation.c mod_dir.c mod_actions.c mod_userdir.c mod_alias.c mod_rewrite.c mod_so.c 5.List of loaded dynamic modules: LoadModule authz_host_module modules/mod_authz_host.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule cgi_module modules/mod_cgi.so 6.My prefrok directive <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 25 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 4000 </IfModule> KeepAliveTimeout 6 MaxKeepAliveRequests 100 KeepAlive On 7.top -u apache: ctrl+ M top - 09:19:42 up 2 days, 19 min, 2 users, load average: 0.85, 0.87, 0.80 Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie Cpu(s): 7.3%us, 15.7%sy, 0.0%ni, 75.7%id, 0.0%wa, 0.7%hi, 0.7%si, 0.0%st Mem: 3652120k total, 3149964k used, 502156k free, 348048k buffers Swap: 4425896k total, 0k used, 4425896k free, 1944952k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 16956 apache 20 0 700m 135m 100m S 0.0 3.8 2:16.78 httpd 16953 apache 20 0 565m 130m 96m S 0.0 3.7 1:57.26 httpd 16957 apache 20 0 587m 129m 102m S 0.0 3.6 1:47.41 httpd 16955 apache 20 0 567m 126m 93m S 0.0 3.6 1:43.60 httpd 17494 apache 20 0 626m 125m 96m S 0.0 3.5 1:58.77 httpd 17515 apache 20 0 540m 120m 88m S 0.0 3.4 1:45.57 httpd 17516 apache 20 0 573m 120m 88m S 0.0 3.4 1:50.51 httpd 16954 apache 20 0 551m 120m 88m S 0.0 3.4 1:52.47 httpd 17493 apache 20 0 586m 120m 94m S 0.0 3.4 1:51.02 httpd 17279 apache 20 0 568m 117m 87m S 16.0 3.3 1:51.87 httpd 17302 apache 20 0 560m 116m 90m S 0.3 3.3 1:59.06 httpd 17495 apache 20 0 551m 116m 89m S 0.0 3.3 1:47.51 httpd 17277 apache 20 0 476m 114m 81m S 0.0 3.2 1:37.14 httpd 30097 apache 20 0 536m 113m 83m S 0.0 3.2 1:47.38 httpd 30112 apache 20 0 530m 112m 81m S 0.0 3.2 1:40.15 httpd 17513 apache 20 0 516m 112m 85m S 0.0 3.1 1:43.92 httpd 16958 apache 20 0 554m 111m 82m S 0.0 3.1 1:44.18 httpd 1617 apache 20 0 487m 111m 85m S 0.0 3.1 1:31.67 httpd 16952 apache 20 0 461m 107m 75m S 0.0 3.0 1:13.71 httpd 16951 apache 20 0 462m 103m 76m S 0.0 2.9 1:28.05 httpd 17278 apache 20 0 497m 103m 76m S 0.0 2.9 1:31.25 httpd 17403 apache 20 0 537m 102m 79m S 0.0 2.9 1:52.24 httpd 25081 apache 20 0 412m 101m 70m S 0.0 2.8 1:01.74 httpd I guess thats all information needed to help me solve this problem. I think the virt memory is to big, the same res. The consumption of ram is increasing all the time. Maybe it's memory leak because i see there is so many static modules compiled. Could someone help me with this issue? Thank you in advance. 8.ldd /usr/sbin/httpd linux-gate.so.1 => (0x0012d000) libm.so.6 => /lib/libm.so.6 (0x0012e000) libpcre.so.0 => /lib/libpcre.so.0 (0x00157000) libselinux.so.1 => /lib/libselinux.so.1 (0x0017f000) libaprutil-1.so.0 => /usr/lib/libaprutil-1.so.0 (0x0019a000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x001b4000) libldap-2.3.so.0 => /usr/lib/libldap-2.3.so.0 (0x001e6000) liblber-2.3.so.0 => /usr/lib/liblber-2.3.so.0 (0x00220000) libdb-4.6.so => /lib/libdb-4.6.so (0x0022e000) libexpat.so.1 => /lib/libexpat.so.1 (0x00370000) libapr-1.so.0 => /usr/lib/libapr-1.so.0 (0x00391000) libpthread.so.0 => /lib/libpthread.so.0 (0x003b9000) libdl.so.2 => /lib/libdl.so.2 (0x003d2000) libc.so.6 => /lib/libc.so.6 (0x003d7000) /lib/ld-linux.so.2 (0x00110000) libuuid.so.1 => /lib/libuuid.so.1 (0x00530000) libresolv.so.2 => /lib/libresolv.so.2 (0x00534000) libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00548000) libssl.so.6 => /lib/libssl.so.6 (0x00561000) libcrypto.so.6 => /lib/libcrypto.so.6 (0x005a6000) libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x006d9000) libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x00707000) libcom_err.so.2 => /lib/libcom_err.so.2 (0x0079a000) libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x0079d000) libz.so.1 => /lib/libz.so.1 (0x007c3000) libkrb5support.so.0 => /usr/lib/libkrb5support.so.0 (0x007d6000) libkeyutils.so.1 => /lib/libkeyutils.so.1 (0x007df000) Currently i cant restart the apache. I work in a company and now there is rush hours. I will do that about 5 pm. Current top -u apache: shift + M top - 12:31:33 up 2 days, 3:30, 1 user, load average: 0.73, 0.80, 0.79 Tasks: 114 total, 1 running, 113 sleeping, 0 stopped, 0 zombie Cpu(s): 3.3%us, 4.7%sy, 0.0%ni, 90.0%id, 1.3%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3652120k total, 3169720k used, 482400k free, 353372k buffers Swap: 4425896k total, 0k used, 4425896k free, 1978688k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 16957 apache 20 0 708m 145m 117m S 0.0 4.1 2:11.32 httpd 16956 apache 20 0 754m 142m 107m S 0.0 4.0 2:33.94 httpd 16955 apache 20 0 641m 136m 103m S 5.3 3.8 1:58.37 httpd 17515 apache 20 0 624m 131m 99m S 0.0 3.7 2:03.90 httpd 16954 apache 20 0 627m 130m 98m S 0.0 3.6 2:13.87 httpd 17302 apache 20 0 625m 124m 97m S 0.0 3.5 2:10.80 httpd 17403 apache 20 0 624m 114m 91m S 0.0 3.2 2:08.85 httpd 16952 apache 20 0 502m 114m 81m S 0.0 3.2 1:23.78 httpd 16186 apache 20 0 138m 61m 35m S 0.0 1.7 0:15.54 httpd 16169 apache 20 0 111m 49m 17m S 0.0 1.4 0:06.00 httpd 16190 apache 20 0 126m 48m 24m S 0.0 1.4 0:11.44 httpd 16191 apache 20 0 109m 48m 19m S 0.0 1.4 0:04.62 httpd 16163 apache 20 0 114m 48m 21m S 0.0 1.4 0:09.60 httpd 16183 apache 20 0 127m 48m 23m S 0.0 1.3 0:11.23 httpd 16189 apache 20 0 109m 47m 17m S 0.0 1.3 0:04.55 httpd 16201 apache 20 0 106m 47m 17m S 0.0 1.3 0:03.90 httpd 16193 apache 20 0 103m 46m 20m S 0.0 1.3 0:10.76 httpd 16188 apache 20 0 107m 45m 18m S 0.0 1.3 0:04.85 httpd 16168 apache 20 0 103m 44m 17m S 0.0 1.2 0:05.61 httpd 16187 apache 20 0 118m 41m 21m S 0.0 1.2 0:08.50 httpd 16184 apache 20 0 111m 41m 19m S 0.0 1.2 0:09.28 httpd 16206 apache 20 0 110m 41m 20m S 0.0 1.2 0:11.69 httpd 16199 apache 20 0 108m 40m 17m S 0.0 1.1 0:07.76 httpd 16166 apache 20 0 104m 37m 18m S 0.0 1.0 0:04.31 httpd 16185 apache 20 0 99.3m 36m 16m S 0.0 1.0 0:04.16 httpd as you can see the memory usage growing up from e.g. res( 135 to 145)m and it will be growing up till memory ends. Are you sure that this option i set up: <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 25 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 4000 </IfModule> KeepAliveTimeout 6 MaxKeepAliveRequests 100 KeepAlive On are correct? Maybe i should decrease some of them? Another questions that bother me: I got e.g. static module mod_negotiation.c compiled into apache and the same module loaded as dynamic. Is this normal that i've loaded duplicated module. But when i want to remove dynamic module(mod_negotiation.c) from httpd.conf and then restart apache error appears. Now I cant tell this error message because i cant restart apache :( Hello again:) This is memory usage just after restart apache: top - 16:19:12 up 2 days, 7:18, 3 users, load average: 1.08, 0.91, 0.91 Tasks: 109 total, 2 running, 107 sleeping, 0 stopped, 0 zombie Cpu(s): 17.0%us, 25.7%sy, 51.0%ni, 4.7%id, 0.0%wa, 0.3%hi, 1.3%si, 0.0%st Mem: 3652120k total, 2762516k used, 889604k free, 361552k buffers Swap: 4425896k total, 0k used, 4425896k free, 2020980k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13569 apache 20 0 93416 43m 15m S 0.0 1.2 0:02.55 httpd 13575 apache 20 0 98356 38m 16m S 32.3 1.1 0:02.55 httpd 13571 apache 20 0 86808 33m 12m S 0.0 0.9 0:02.60 httpd 13568 apache 20 0 86760 33m 12m S 0.0 0.9 0:00.81 httpd 13570 apache 20 0 83480 33m 12m S 0.0 0.9 0:00.51 httpd 13572 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13573 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13574 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13761 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.01 httpd 13762 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.01 httpd 13763 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.00 httpd I will try to compile apache from source to newest version. Thx for help guys.

    Read the article

  • BIOS interrupts, priviledge levels and paging

    - by Jack
    Hi, I was learning about Intel 8086-80486 CPUs and their interactions with HW. But I still don´t understand it quite well. Please, help me fill blank spots. First, I know that CPU communicates with HW using BIOS interrupts. But, what really happens in PC, when I call some INT instruction? I know that according the interrupt table some instructions begin to execute, but how by executing some instructions can BIOS recognize what I want to do? Becouse as far as I know, CPU has no extra communication channel with BIOS, it can only adress memory and receive data. So how can I instruct BIOS to do something, when I can only adress RAM? Next thing I dont understand is about priviledge levels. I know about ring model, and acess rights, but how CPU knows which priviledge level has executed instruction? I think that these priviledges apply only when intruction is trying to adress memory, but how applications gets its priviledge level? I mean I know its level 3, but how its set? And last thing, I know that paging is adress scheme that is used to support aplication-transparent virtual memory, or swaping, but I could not find any informations about how is paging tied with protected mode. Like if paging is like next mode independent of protectet mode, or its somehow implemented within protected mode. And if it is implemented in protected mode, isn´t it too slow, to first adress application space, than offset, and than paging folder, page and offset once again? Thank you for every response.

    Read the article

  • Linux AMD-FX 8350 temperature monitoring

    - by HyperDevil
    I’m trying to get the CPU temperature for my AMD-FX8350 on Debian Squeeze. I ran sensors-detect and then sensors, but I only get my motherboard sensors (it8720-isa-0228). There are three temperature values there but I assume those are not for the CPU. it8720-isa-0228 Adapter: ISA adapter in0: +1.36 V (min = +0.00 V, max = +4.08 V) in1: +1.50 V (min = +0.00 V, max = +4.08 V) in2: +3.38 V (min = +0.00 V, max = +4.08 V) in3: +2.93 V (min = +0.00 V, max = +4.08 V) in4: +3.07 V (min = +0.00 V, max = +4.08 V) in5: +4.08 V (min = +0.00 V, max = +4.08 V) in6: +4.08 V (min = +0.00 V, max = +4.08 V) in7: +2.93 V (min = +0.00 V, max = +4.08 V) Vbat: +3.01 V fan1: 3375 RPM (min = 10 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 1730 RPM (min = 10 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +53.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode temp3: +65.0°C (low = +127.0°C, high = +90.0°C) sensor = thermal diode cpu0_vid: +0.000 V Is there anything I am missing? I also loaded the K8temp and K10temp modules and ran sensor-detect without any results. I do see this message in dmesg: hwmon-vid: Unknown VRM version of your x86 CPU

    Read the article

  • Sun Solaris - Find out number of processors and cores

    - by Adrian
    Our SPARC server is running Sun Solaris 10; I would like to find out the actual number of processors and the number of cores for each processor. The output of psrinfo and prtdiag is ambiguous: $psrinfo -v Status of virtual processor 0 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. Status of virtual processor 1 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. Status of virtual processor 2 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. Status of virtual processor 3 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. _ $prtdiag -v System Configuration: Sun Microsystems sun4u Sun Fire V445 System clock frequency: 199 MHZ Memory size: 32GB ==================================== CPUs ==================================== E$ CPU CPU CPU Freq Size Implementation Mask Status Location --- -------- ---------- --------------------- ----- ------ -------- 0 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C0/P0 1 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C1/P0 2 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C2/P0 3 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C3/P0 _ $more /etc/release Solaris 10 8/07 s10s_u4wos_12b SPARC Copyright 2007 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 16 August 2007 Patch Cluster - EIS 29/01/08(v3.1.5) What other methods can I use? EDITED: It looks like we have a 4 processor system with one core each: $psrinfo -p 4 _ $psrinfo -pv The physical processor has 1 virtual processor (0) UltraSPARC-IIIi (portid 0 impl 0x16 ver 0x34 clock 1592 MHz) The physical processor has 1 virtual processor (1) UltraSPARC-IIIi (portid 1 impl 0x16 ver 0x34 clock 1592 MHz) The physical processor has 1 virtual processor (2) UltraSPARC-IIIi (portid 2 impl 0x16 ver 0x34 clock 1592 MHz) The physical processor has 1 virtual processor (3) UltraSPARC-IIIi (portid 3 impl 0x16 ver 0x34 clock 1592 MHz)

    Read the article

  • Auto load balancing two node Cluster Hyper-v 2008 R2 enterprise?

    - by Kristofer O
    My setup is a 2 node cluster with 72GB ram each and a ~10TB MD3000i Iscsi SAN. I have about 30VMs running I keep about 15 on either server. I do a live migration to the other server if I need to run updates or whatever... Either one of the servers is able of running all VM if needed, but the cpu is pretty high. Here's my issues. I know Hyper-v has a limit of a single Live-migration at a time. But Why doesn't it queue them up to move one at a time? If I multi select I don't get the option to live migrate a one at a time. OR if I'm in the process of Migrating one it will give me an error that it's currently migrating a VM... Is there a button I missed that will tell a Node that it needs to migrate all the VMs elsewhere? Another question, does anyone know whats the best way to load balance VMs based on CPU and/or network utilzation. I have some VMs that don't do much. and some that trash the CPU or network. I'd like to balance it out on both servers if at all possible. and Is there any way to automate it? last question... If I overcommit my Cluster is there a way to tell the cluster that I want certian VMs the be running and to savestate other VMs based on availible system resources? Say when my one node blue screens and the other node begins starting the VMs up. I want the unimportant ones to shutdown or savestate so the important ones can stay running or come back online. Thanks just for reading all that. Any help would be great.

    Read the article

  • Htpc aka "Media Center": cheap and *silent*?

    - by Unknown
    It may be me, or the place I live (Italy), but it seems pretty hard to get a build or a prebuilt nettop or a laptop that fits the need. I need something silent able to playback all h.264 fullhd content without stuttering, and well (and not loosing the hw acceleration because of softsubs...) silent not ugly silent and (possibly) cheap. I'm going the linux route, therefore i'm moving towards a cpu-based or nvida-integrated solution (i don't think ati hw accelerated playback - or the intel "hd" acceleration - is useable yet). Ion nettop; it's either the Acer Revo (but here it's incredibly pricey and it's hard to find the dualcore version) or the Asrock Ion 330, that in the current version is rated "silent" at 26Db. 26. Sounds pretty noisy to me!!! the previous version was even worse. was this product really aimed at htpc market?? the Dell Zino - i think it's ATI based unfortunately. Laptop: correct me if I'm wrong: sub 600€/$ units are quite loud under full load (because of the tiny fans). ULW laptops are indeed quite similar: tiniest fans = high pitched noise and the cpu still lacks power for non hd-accelerated video decoding Handmade build: little money can be saved with underpowered cpus, a low-midrange cpu would help in the case of non-hw-accelerated content the cases are quite pricey the PSU one has to get ranges between 100/150 €/$ minimum to keep the noise down a low-mid build, all included, sums up to over 650 €/$ for a still-looking-ugly-unit, without the blu-ray drive. Please help. What do you advise on this? ;) Am I ignoring laptops too much, maybe? Are low-priced Acers that noisy/high pitched under full load?

    Read the article

  • Problems with freetype on OSX 10.7.4

    - by eythor
    I'm trying to install mplayer with OSD using homebrew. I've added both --enable-menu and --with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config to the brew recipe. ==> Downloading http://www.mplayerhq.hu/MPlayer/releases/MPlayer-1.1.tar.xz Already downloaded: /Library/Caches/Homebrew/mplayer-1.1.tar.xz xz -dc "/Library/Caches/Homebrew/mplayer-1.1.tar.xz" | /usr/bin/tar xf - ==> ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 -- with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 --with -freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config Checking for cc version ... clang 4.2.1 (experimental support only) Checking for working compiler ... yes Detected operating system: Darwin Detected host architecture: x86_64 Checking for cross compilation ... no Checking for host cc ... cc Checking for CPU vendor ... GenuineIntel (6:15:10) Checking for CPU type ... Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz For freetype-config I've tried three seperate paths; /usr/X11R6/bin/freetype-config, /usr/X11/bin/freetype-config and the one in Cellar. Checking for freetype always fails: Checking for freetype >= 2.0.9 ... no Checking for fontconfig ... no (FreeType support needed) Although freetype itself seems to be installed. mufasa:bin eythor$ freetype-config --version 15.0.9 mufasa:bin eythor$ freetype-config --ftversion 2.4.10 mufasa:bin eythor$ freetype-config --libs -L/usr/local/Cellar/freetype/2.4.10/lib -lfreetype -lz -lbz2 mufasa:bin eythor$ freetype-config --cflags -I/usr/local/Cellar/freetype/2.4.10/include/freetype2 - I/usr/local/Cellar/freetype/2.4.10/include I'm not sure what to try next or how to figure out why freetype isn't recognized. Can anyone point me in a sensible direction?

    Read the article

  • How to improve Windows Server 2008 R2 to handle many connections?

    - by invisal
    It has been a few days so far that I am trying to figure how to solve this problem. First of all, I am running a website with an average daily page view of 350,000. Previously, all ads management (tracking click and impression that each ads has served) and content were served in a single server with the following spec: Server 1 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 8 GB Storage: 2 x 1 TB hard drives Bandwidth: 10 TB per month To improve our website speed, I decided to separate the ads management script to another dedicated server because we have more than 15 advertisers to 30 advertisers per each page. Server 2 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 4 GB Storage: 2 x 300 GB hard drives Bandwidth: 10 TB per month The Problem The problem is that Server 1 can handle both content and ads system. Now, that I take away the ads system and put it at Server 2. Server 2 can barely serve only ads system. Test First of all, I moved 75% of the ads to Server 2. And then, perform a ping to server: ping -t xxxxx. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Reply from xxxxx bytes=32 time=289ms TTL=116 Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=348ms TTL=116 Reply from xxxxx bytes=32 time=284ms TTL=116 Then, I moved 100% of the ads to Server 2. Then, perform a ping to server again. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Request timed out Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Request timed out Request timed out Reply from xxxxx bytes=32 time=284ms TTL=116 Attempts Increase MaxUserPort and TcpNumConnection Restart the server Increase IIS Max Instances and Instance MaxRequests Server Resource Only 10%-15% of the network connection is used Only 10%-15% of the CPU is used Only 25% of the memory is used

    Read the article

  • Why is my Compaq NC8430 laptop so darned HOT ?

    - by Cheeso
    For a long time I've had a Compaq nc8430 laptop. It's nearly 3 years old now. Originally shipped with WinXP, but I installed Vista on it. From the very start it was not a good experience. This thing has one of those "stickpoint" mice, which I like. After a while, I noticed that the computer was generating lots and lots of heat. So much heat, that the stickpoint bumper would melt and disintegrate. Normally I would expect heat if the CPU was working hard, but even when the CPU was idle, the computer was hot. Much too hot to keep on my lap. Turns out this is not an uncommon problem. I installed the HWmonitor tool, and found that the CPU temp was 82C when it was plugged in - pretty darn hot. And because the temp was so high, the fan never turned off, so the laptop was as loud as a jet engine, always. If I unplugged it from A/C power, the screen would dim and the temperature would decrease, and the fan noise would lessen, but still, it was too loud. It's totally unusable. What is the problem?

    Read the article

  • System fans connected to a Gigabyte Z77-D3H motherboard do not increase in speed

    - by Andrew
    The motherboard (Gigabyte Z77-D3H) controls my 3-pin CPU fan just fine. My system fans are a 3-pin fan (plugged into SYS_FAN1), and a 4-pin fan plugged into SYS_FAN3. All 3 of the system fan headers are 4-pin, but the user manual states that SYS_FAN1 is really a 3-pin header (that it can control the speed of a 3-pin fan) and the 4th pin is just a reserve. All my fans have a max RPM of 2000. Normally, all the fans run around 1000 RPMs when I'm not doing anything intensive. This proves that the motherboard can set the speed. However,when I run Folding@Home and my temperatures increase (around 70C) only the CPU fan increases to around 2000 RPMs. The system fans stay around 1000 RPMs. Through the BIOS I am able to disable the system fan control and the system fans then run at max RPMs (meaning the motherboard was doing something). I've updated the BIOS to the latest version and tried out Speedfan, but neither helped my situation. What I'd like is for the system fans to ramp up their RPMs as needed. Any thoughts? Tl;dr: My system (case) fans, but not my CPU fan, are always stuck around 1000 RPMs out of 2000 no matter the temperature.

    Read the article

  • sql server 2008 cluster hang when a heavy load is run

    - by Billy OT
    we have a sql server 2008 active/active cluster running on wondows 2008R2 O/S. 14GB RAM, 4xCPU. we have set a ceiling of 12GB for sql server. We're running an agent job which loads 3 million records to a database. during this load the job fails and the cluster seems to attempt to fail over to the other node but unsuccessfully i.e., the cluster address is no longer accessible. we have to manually fail the cluster node back. during the load on viewing task manager we can see that memory usage hits a max of 12.5GB and CPU at times hits 100% on all 4 CPU, but for the most part fluctuates at an average of about 60%. I suppose my question is, will a cluster try to fail over if memory or CPU are taking a heavy hit? or am i barking up the wrong tree? also any ideas why it wouldn't fully fail over? we've crawled through logs, of which there are a lot, and can't find anything useful. we've also tried recreating the issue but it ran successfully at a later time. Also 3 million rows doesn't seem like a lot but in terms of resources should 14GB RAM and 4xCPU not be sufficient? Further information on this, we ran the load again today and corrupted the database! We received the error message : LogWriter: Operating system error 170. It looks like, under the heavy load, the sql cluster attempted to fail over and in doing so migrated a lun (or drive) which meant the disk was no longer reachable. (this is just our theory). The database is now 'suspect' and requiring restoration. The 170 error above also indicates that on failing over to the other node, the sql service could not start as it was already in use, therefore it couldn't fail over fully?? But I'm wondering why would it need to fail over in the first place? My assumptions could be completely wrong on this, so any ideas would be appreciated.

    Read the article

  • Officially announced RAM support size doesn't apply to one of twin rigs with just one difference

    - by Deniz
    It'll take a little long to describe my situation but here goes the story : In January 2009 we bought (the OEM parts) two similar systems with just one difference. One of them had a Phenom X4 cpu and the other one (mine) a Phenom X3 cpu. At the beginning we had problems with both systems to power them on whilst having all of their ram slots being full. We decided to install the systems with just 2 slots populated and later try to install the rest of ram sticks. Both systems did succeed to support 3 sticks. We tried many different procedures to make the systems work with their fourth ram slots being populated. We waited for new bios updates and flashed the boards when they were available, we tried different ram sticks with different frequencies etc. One day while we were trying to install the fourth stick, the X4 machine did accept it. The other one did not. The most mind boggling thing was that after one of my trials the X3 system begun to not operate with the third slot populated. Our boards did have AMD 770 chipsets and we even tried to change the board of the X3 machine with another 770 chipset board. Now my questions are : Should we change the cpu ? What is causing the X3 system to not accept the fourth (or now the third) ram stick ? The manufacturers sites do claim that this boards do accept 4 ram sticks (but they only tested them with certain ram brands and models). What are the limitations for maximum ram configurations on motherboards ? Are there some "rules of thumb" except frequency, voltage, chip type considerations for which we did check our parts ? Our boards are : Gigabyte GA-MA770-DS3 Sapphire PC-AM2RX780 - PURE CrossFireX 770

    Read the article

  • PostgreSQL lots of large Arrays and Writes

    - by strife911
    Hi, I am running a python program that spawns 8 threads and as each thread launch its own postmaster process via psycopg2. This is to maximize the use of my CPU-cores (8). Each thread call a series of SQL Functions. Most of these functions go through many thousands of rows each associated to a large FLOAT8[] Array (250-300) values by using unnest() and multiplying each FLOAT8 by an another FLOAT8 associated to each row. This Array approach minimized the size of the Indexes and the Tables. The Function ends with an Insert into another Table of a row of the same form (pk INT4, array FLOAT8[]). Some SQL Functions called by python will Update a row of these kind of Tables (with large Arrays). Now I currently have configured PostgreSQL to use most of the memory for cache (effective_cache_size of 57 GB I think) and only a small amount of it for shared memory (1GB I think). First, I was wondering what the difference between Cache and Shared memory was in regards to PostgreSQL (and my application). What I have noticed is that only about 20-40% of my total CPU processing power is used during the most Read intensive parts of the application (Select unnest(array) etc). So secondly, I was wondering what I could do to improve this so that 100% of the CPU is used. Based on my observations, it does not seem to have anything to do with python or its GIL. Thanks

    Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >