Search Results

Search found 3676 results on 148 pages for 'dual band'.

Page 70/148 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Lenovo S10 Ideapad will not boot while original hard drive is installed, neither from hard drive or

  - by aki

  Hello, first time posting here so I'll try to be very clear. I have a Lenovo S10 Ideapad netbook which fails to boot to an OS. It shows the Lenovo splash screen and can get to the BIOS but it doesn't get to GRUB (was dual booting Ubuntu 9.10 and Win 7, was working fine for months, ie this isn't a new dual boot gone bad). After the splash screen it displays a flashing cursor in the upper left corner. Power cycled to no avail. Here is what I have done trying to narrow the problem down: The machine will boot to Ubuntu using an install/live USB drive, but only if ANOTHER hard drive is installed or NO hard drive is installed. The boot order always lists USB first. Also, there is a 2 gb RAM upgrade but I think that's fine; the Ubuntu USB drive boots fine with it, and "free" sees the whole 2gb of memory. So it seems like the hard drive is bad. I was able to put the bad drive in a different laptop and mount it to recover files. I'm ready to replace the bad hard drive, but I would like to know if this situation makes any sense. If the hard drive is bad, shouldn't I still be able to boot with the Ubuntu USB drive while the bad drive is installed? I would have expected the machine to boot into Ubuntu anyway even if with a bad drive, since the boot order lists USB first. But it seems that when the bad drive is installed, the machine ignores the USB drive and hangs with the flashing cursor. Thanks for any ideas! Sorry for the long post, I just want to put all the info I have up front! Basically I'm going to buy a new drive, but I am mostly curious if this is a typical or at least not unusual situation.

  Read the article

• Have it fixed or buy a new one?

  - by Workshop Alex

  My dual-monitor system has just become a single-monitor system again when the older monitor decided it would be nice to just turn to black. It's a Samsung LCD monitor and is over three years old. Not sure if the warranty is still valid but I just wonder what option would me more efficient: 1) Have the monitor fixed for a small amount. 2) Buy a new monitor for a slightly bigger amount. When monitors were still expensive, I wouldn't doubt about this and would just have my monitor repaired. But prices are so low nowadays, (and repairs are expensive) that I wonder if it's worth the trouble... Of course, I'm in no hurry since I still have another monitor. It's just that I liked the dual-monitor setup. Solved! Just ordered a new monitor. A Samsumg Syncmaster T260HD 25,5". Much more than it would cost me if I just had my old one repaired but I noticed that this one has a build-in TV tuner, plus speakers. It's way more expensive than a repair, but it's worth the additional value it provides.

  Read the article

• How do I stop panning on a monitor that supports a specific resolution?

  - by IronicMuffin

  Hi all, I've been battling this for a few days now. Any and all help is appreciated. I have a planar monitor with a native res of 1280x1024. At one point, I had used PowerStrip to override "something" and set the res to 1600x1200, and it worked great. I then installed new intel graphics drivers for my 86895g (or w/e model) video card, which screwed up whatever settings I had. If I set it to 1600x1200 this time, it would set the res correctly, but give me a 1280x1024 viewport and the screen would pan when the mouse got to the edges of the screen. Absolutely not useful. Ok, so I was limited to 1280x1024 now. W/e. Now...enter new video card with two video ports. I have two monitors now and the latest nVidia drivers. I decide to try to get dual 1600x1200 going...ended up screwing the original monitor up so much now that it's at 1280x1024, with a 1024x768 viewport and panning! Absolutely not usable now. So what I need, and I can't seem to find on any forums, is help doing one or more of the following: Clearing out all monitor/edid info out of the windows registry without corrupting the registry. Actually correctly override the EDID values and get my sweet res back. Some other way of getting back to at least dual 1280x1024 with NO panning. Note: My device manager shows 4 monitors for some reason. My registry shows entries for all sorts of monitors that have been hooked up to the machine over the years. It's making it difficult to debug. Experience with PowerStrip would be helpful. I've been mucking with Phoenix EDID designer and MonInfo as well, but I'm stumbling around in the dark with these. Windows XP SP2 nVidia GeForce 6200 nVidia drivers: v258.96 Monitor: Planar PL 1910M Thanks!

  Read the article

• Motherboard running rather hot while gaming

  - by I take Drukqs

  Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

  Read the article

• Access Existing Linux Installation from Windows Bootloader - Linux Installed and Then Windows 7

  - by nicorellius

  My hard drive is failing. I installed a new drive, and the installed Ubuntu 12.04 to try to rescue data. Realized that I wanted to install Windows and just access drives without transferring data (there are loads of it). I then installed Windows 7. Now my drive only boots to Windows 7. How do I access Linux and make Windows boot-loader load Linux? I originally thought I would just not use the Ubuntu installation but now I think I want it to be a dual boot system. What are good boot-loaders to install for this kind of dual boot situation? Can I accomplish this with BCDEdit? If I would have done this the other way (Windows first, then Linux) everything would be fine, but I didn't and now I'm trying to fix this. The problem I have is that I don't really know how to boot into Linux to retrieve any files I need. I guess using the disc would work, but I'm not sure how to go about this.

  Read the article

• Is this processor burned?

  - by Jhonnytunes

  I've recently exchange the processors in two PCChips boards. Both boards are LGA775. Board A is P17G(Pentium 4 HyperThreading 3GHz) and board B is P49G(Pentium Dual Core 3GHz). I use board A to watch videos, and some of them are 3GB size and this is why I exchanged the CPU. I installed Dual Core in board A and it worked out of the box, now 3GB videos use 5% of CPU instead of 50%. When I installed the pentium in the board B, I forgot to connect the 4pin power and, when i powered on the PC, the CPU fan stay off. Then, I connected all right this time, and now the board doesnt show video. I think the CPU is not working but im not sure about that. The PC turns on and the HD spins, the CPU fan spins, network socket blinking, but not video and case power led is neither blinking. I tried with other PSU and everything was the same. I figure out that CPU have that paste above. IDK really what's happening, I hope I dont have to buy another CPU. Is it Burned?

  Read the article

• Can a folder on a NAS be made available as a physical drive in VMWare?

  - by asbjornu

  We are currently in the process of moving from a single web server to two load balanced web servers and are facing some challenges we don't quite know how to fix. One of these is that the current single server hosts applications that write stuff to disk. The applications running on the server expects that when something is written to disk it later will in fact exist, so it's important that this premise is fulfilled with the dual server architecture as well. The dual server setup is a couple of VMWare instances with Windows Server 2008 R2 as the guest operating system. Out of the box, these instances does not share any kind of file system, so just moving the applications over would make them break since one instance would write something to the file system that doesn't exist on the other. Thus we need to share a file system between the two virtual servers. Our host has proposed to create a network share on a SAN and map this share individually on each virtual machine. This doesn't work too well due to NTFS permissions, etc., because the share needs to be accessed by several independent web applications that won't even be in the same application pool. The only solution that kind of works is to hard code an "identity" for each web application into its web.config file, but this means password in clear text which doesn't sit well with me. Since the servers are virtual, I'm thinknig: Wouldn't it be possible to make a NAS area available as a physical disk in the gues operating system somehow? Since VMWare has full control of the virtual hardware, you'd think it would be able to "fake" a local hard drive in the virtual machine that in reality is a folder on a NAS, but so far I haven't found anything that states how and if this is possible. So I have to ask the wonderful Server Fault community: Can a folder on a NAS be made available as a physical drive (typical D:) in both of the virtual machines?

  Read the article

• What are these CPU cache settings? Snoop Filter, ACL prefetch, HW prefetch

  - by eater

  I was in my BIOS setup turning on VT-x support today and saw these other settings. A little googling indicates that they each seem to turn on some sort of optimization to do with the CPU's L2 cache. They were all turned off by default. The processor in question is an Intel Xeon quad-core 3.4GHz (X5492). My OS is Linux 2.6.35.10-74.fc14.x86_64 #1 SMP Thu Dec 23 16:04:50 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux. I have 4GB of RAM if that matters. Here's what the BIOS manufacturer has to say: Snoop Filter Enabling the snoop filter typically improves performance by reducing snoop traffic on the frontside bus in dual processor configurations. Well I like the sound of improved performance. Why would the BIOS have this off by default? Or by dual processor do they not mean multi-core? Regardless, is there a downside if this is on? ACL Prefetch When enabled, the Adjacent Cache Line Prefetcher fetches both cache lines that comprise a cache line pair when it determines required data is not currently in its cache. When disabled, the processor will only fetch the cache line required by the processor. HW Prefetch Fetches an extra line of data into L2 from external memory. Both of these sound like optimizations that have some drawbacks. What are the reasons to turn them on? What are the reasons to leave them off. Why is the default off?

  Read the article

• Linux Mint Constantly freezing on Dell XPS L502X

  - by Josh

  I recently partitioned my hard drive to dual boot the existing Windows 7 with Linux Mint because I am tired of using Windows, especially the lack of terminal. I want to eventually remove Windows 7 and just run it from a VM within Linux Mint, but I want to make sure that I like the Mint before going all in. I ran Linux Mint on a VM inside Windows for a while, enjoyed it, and never had any issues with it. Since installing on my hard drive it has started freezing every 5-10 minutes, and the only way to get it back is to either power down, or close the lid and reopen once it sleeps. I've also tried running Ubuntu on dual boot in the past, and while it never froze, the battery life was terrible, and the fan was constantly running. I'm experiencing the same battery/fan problem with Mint, which doesn't make sense to me, as Linux should be lighter on the CPU than windows. If I had to guess I'd say it's probably a driver thing, with my video card or fan or something. My battery life in Windows is ~2 hours and its about 40 minutes in Linux. At this point, that is even if my laptop doesn't freeze before then. On a less important note, I also have an intel Centrino 6150 WiMax card that I'd like to be able to use, but that won't register on the Linux system either. I have tried downloading drivers for both of these, but neither have solved my problems. I'm definitely getting frustrated and am getting close to giving up on Linux even though I dread working on a Windows machine.

  Read the article

• Reliable router with good VPN and WAN Throughput [closed]

  - by Asdande

  I have 2 cisco rv180 VPN router. These routers are giving me lots of problems. The webpages wont load correctly, slow response to load webpages plus other many issues. I have several cases pending with cisco. I give up on these routers. I would like to know if you guys can recommend me a reliable router for our 3 branches (NY - main, SC and FL). In NY- main office, we have 55 users. In SC branch, 6 users. In Florida we only have 1 (will grow soon). I need a router capable of support: 3 VPNs Site-to-Site connection VPN throughput of at least 40-50 Mbps WAN throughput at least 100 Mpbs and up PPTP Server for at least 5 PPTP users Web filtering - all users need access to internet Good Firewall Port forwarding for FTP Server - able to show the public IPs of FTP users (rv180 cannot do that, just shows me router's LAN interface IP, opened a case with cisco, now escaleted to level 2, still no answer or workaround) Dual WAN ports for balance or backup internet. Gigabit WAN/LAN ports Price between $400-$500 range. I was thinking on the TP-LINK TL-ER6120 or TL-ER6020 according to the review on smallnetbuilder.com http://www.smallnetbuilder.com/lanwan/lanwan-reviews/31983-tp-link-tl-er6020-safestream-gigabit-dual-wan-vpn-router-reviewed but I don't want to make another mistake as I did when I bought the cisco RV180. Thank you in advance,

  Read the article

• ATI Firepro v4800 3 monitor support

  - by Jared275

  I have an interesting, yet very frustrating problem. I have two computers, both running win7 32 bit, and both with ATI Firepro V4800 graphics cards. Both are using the DVI port and two DP to DVI adapters to connect 3 monitors. One of them is able to display three desktops, while the other fails at enabling the third, displaying "cannot save changes" in display properties while requiring that one monitor must be disabled when making the change in CCC. I've verified that both computers have the same driver version and that both are using the same DP-DVI adapters. This articles suggests a few things to try, but none of its suggestions seem to work either. I'm kind of at my wits end, hence my posting here. If this is not an appropriate question for SU, I apologize. I admit that I am not very familiar with the differences between dual link and single link DVI, and that is something I have not verified is standardized between the two computers. Is that a possible reason one is working and the other isn't? How do I check if the DVI cable is a single link, or dual link?

  Read the article

• computer freezes but music continues

  - by Danny

  Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

  Read the article

• Problems reviving old pc including graphics card issue.

  - by Mick

  I have a PC that seemed to have died years ago that I am trying to revive. It has a dual core athlon processor and a gigabyte motherboard. It had two dual output graphics cards, and I have long since forgotten which output would print out the diagnostic information as the PC starts up. Also I suspect that the resolution set on all the monitors was probably higher than my current single monitor is capable of displaying. The motherboard also has a built in graphics card, so I thought it may be simplest to remove both the graphics cards and plug my monitor into the onboard graphics just while I get things going. Does that seem sensible? Now the other problem: The PC has two hard drives. I have no idea which one is the primary one it is attempting to boot from. When I power up, the fan comes on and I hear some chuga-chuga-pause chuga-chuga-pause repeat indefinitely. I'm not sure which device is making the noise. There are no-beeps at any time. I see nothing on the screen at any time, not even for a second. Any suggestions? EDIT: If T start up the PC without the power connected to the CDrom there is no chuga-chugan noise.

  Read the article

• Oracle: 1 Large Server vs. 2 Smaller Servers?

  - by nvahalik

  We are in the planning stages of setting up our production Oracle 10gR2 environment. Our budget gives us the ability to buy 2 processor licenses of Oracle DB Standard Edition. We have minimal experience with Oracle so I'll defer to anyone who has used it. We are trying to decide if we should set up a single dual quad-core box or 2 individual quad-core boxes in a RAC configuration. Our DB right now is about 60 GB, and at our peak, we'll have up to 150 concurrent users. Most of the big stuff is done via batch processing at night. My gut tells me that having 2 boxes in a RAC configuration can't be a bad thing because it provides a true hardware failover solution. DB stored in a shared LUN on a SAN via iSCSI. Plus if we ever need to add capacity, we already have boxes in place that can be upgraded with extra procs (I assume with zero downtime, since it's set up in a RAC config) if we add extra licenses, or RAM. Does RAC have any performance penalties? Will it add extra latency? Is there any true advantage for having dual processor boxes running these systems? If we build out the Oracle boxes with special hardware: hardware iSCSI cards, TOE NICs, will these boxes be solid? We are deploying on 64-bit Windows. So what would you do? One box or two?

  Read the article

• quad sli with gtx 690 not working

  - by Moaadh

  I have two cards GTX 690 (dual core). I did the Sli successfully. Nvidia control panel acknowledges the two cards as quad Sli. However, the problem is that Windows 7 64-bit Ultimate is showing me the graph memory size as 4 GB while it is supposed to be 8 GB because of the Sli. Also the benchmark from all software is giving me a very low score compared to some other guy's benchmark on YouTube. It gives me a big headache. Does anyone know why this is happening? If so, how can I get Windows 7 to recognize all 8 GB of memory? Thanks for your help in advance. My computer specifications: (Processor: Intel Core i7-3930k @3.2GHz(12CPUs))--- (Memory: 65536 MB Ram 1866 MHz)-- (OS: Windows 7 Ultimate 64-bit)-- (OCZ 240GB as SSD PCIe drive for booting and storage disk)-- (DirextX version: DirectX 11)-- (VGA Card: 2 X EVGA GTX 690 Dual GPU. Each GPU is 2 GB, so total memory should be 8 GB.)-- (MotherBoard: ASUS Rampage IV Extreme)-- Others with lesser specifications get a 2500 score in heaven benchmark while I get 1501 as if it is one card.

  Read the article

• 20 1TB drives vs. 10 2TB drives in RAID5/6 server

  - by Hunter

  Hi everyone, I will be setting up a server at work and I need some advice on some details. The setup will be one blade-type server (8-core, 16GB RAM) with two subsystems - one for the main storage the other to back it up. I'm shooting for a 20TB array (I know it'll be less after formatting and parity drives). So is there any advantage one way or the other with either 20 1TB drives or 10 2TB drives? I'm not sure right now how many controllers I should have either (in the quote I have is a dual-port controller). I would think two controllers for a server of this size would be a better choice than the dual-port controller (but I really don't know). And would an array of this size have any performance issues in RAID 5 or 6 (I know RAID 5 or 6 are "slower" because of all the parity calculations). Also, these will be either WD RE3 (1TB) or the RE4 (2TB). Oh, also, for the backup array would it be ok to use the WD 2TB green drives (also in RAID5 or 6)?

  Read the article

• HP DL380 G3 2U For Basic Web Server in 2012

  - by ryandlf

  I have an opportunity to pick up a used HP DL380 G3 2U for $100. I'm looking for a basic entry level web server that I can host a small - medium size website on and more or less learn the ins and outs of running my own web server before I bite the bullet and spend a couple grand on a server. The specs are: Dual (2) Intel Xeon 2.4GHz 400MHz 512KB Cache 4GB PC2100 ECC Registered Memory 6 x 72GB 10K U320 SCSI Hard Drives Smart Array 5i RAID Controller Redundant Power Supplies DVD/Floppy, Dual Intel GB NIC's, USB Or would I be better off spending a couple hundred bucks on something like: this new HP Seems like the only major difference is SATA and a bit of storage, but I will likely be implementing a separate storage system of some sort anyways. I guess it also wouldn't hurt to mention that I plan on running a linux server distro, so would the hardware be likely to support linux with a system that is 4 generations old? I don't mind spending a couple hundred extra dollars if its a better solution, but as mentioned previously I am simple looking for a server to learn on and probably use for a year or so while I put together a small - medium size website.

  Read the article

• Static DHCP binding

  - by Alex

  Good time of day, SF people. I have created a manual DHCP binding entry on a Cisco router so that a client would always get leased to it. The clients wants to get the same address on both of his dual-boot linux systems. He tries to get an IP address leased and he succeeds on one of the dual-boot operating systems. When he reboots to another one he gets a lease for a completely different one. I don't get it. The MAC addresses are the same (we checked in ifconfig, so what could be happening here? Why is the router confused? Or is it something else? Also, how can I check DHCP server IP address who I have got an IP address from (on Linux)? Configuration on Cisco: ip dhcp pool MANUAL_BINDING0001 host 192.168.0.64 255.255.255.0 hardware-address dead.beef.1337 dns-server 192.168.8.11 default-router 192.168.0.254 domain-name verynicedomainigothere.cn PS. Is it mandatory to use client-name configuration line?

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• stretch a row to fit the data in jasper reports using iReport

  - by stanley

  How do i stretch a text field to fit the data, If data exceeds the band height the text field doesn't stretch. I have added the text field tag in my jrxml... Example:-

  Read the article

• Internationalization in a website

  - by bhardwaj

  Dear All, I m using ResourceBundle method getBundle(Propertyfilename,Local.languagename) class which returns an object of ResourceBundle of the local rb = ResourceBundle.get Bundle("Locale Strings", Locale.ARABIC);-Not Supported How can i use this to support arabic,band english.

  Read the article

• How can I use this animation code?

  - by O.C.

  I'm a newbie and I need some help. I want to display a popup image over a given UIView, but I would like it to behave like the UIAlertView or like the Facebook Connect for iPhone modal popup window, in that it has a bouncy, rubbber-band-like animation to it. I found some code on the net from someone who was trying to do something similar. He/she put this together, but there was no demo or instructions. Being that I am so new, I don't have any idea as to how to incorporate this into my code. This is the routine where I need the bouncy image to appear: - (void) showProductDetail { . . . //////////////////////////////////////////////////////////////////////// // THIS IS A STRAIGHT SCALE ANIMATION RIGHT NOW. I WANT TO REPLACE THIS // WITH A BOUNCY RUBBER-BAND ANIMATION _productDetail.transform = CGAffineTransformMakeScale(0.1,0.1); [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.5]; _productDetail.transform = CGAffineTransformMakeScale(1,1); [UIView commitAnimations]; } . . . } This is the code I found: float pulsesteps[3] = { 0.2, 1/15., 1/7.5 }; - (void) pulse { self.transform = CGAffineTransformMakeScale(0.6, 0.6); [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:pulsesteps[0]]; [UIView setAnimationDelegate:self]; [UIView setAnimationDidStopSelector:@selector(pulseGrowAnimationDidStop:finished:context:)]; self.transform = CGAffineTransformMakeScale(1.1, 1.1); [UIView commitAnimations]; } - (void)pulseGrowAnimationDidStop:(NSString *)animationID finished:(NSNumber *)finished context:(void *)context { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:pulsesteps[1]]; [UIView setAnimationDelegate:self]; [UIView setAnimationDidStopSelector:@selector(pulseShrinkAnimationDidStop:finished:context:)]; self.transform = CGAffineTransformMakeScale(0.9, 0.9); [UIView commitAnimations]; } - (void)pulseShrinkAnimationDidStop:(NSString *)animationID finished:(NSNumber *)finished context:(void *)context { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:pulsesteps[2]]; self.transform = CGAffineTransformIdentity; [UIView commitAnimations]; } Thanks in advance for any help that you can give me.

  Read the article

• Programming Related Songs

  - by Jim McKeeth

  One song per answer please! We have discussed music you listen to while coding, but I looking for music related to coding and coders. It can be eclectic or mainstream, and even a bit of a stretch (just explain the connection). Vote for your favorite song or add it if it isn't already here. Link to lyrics, band, music, video, etc., when possible.

  Read the article

• Stretch a row if data overflows in jasper reports

  - by stanley

  how do i stretch a row when data overflows the band height in jasper reports, I have set the stretch with overflow flag as true but it doesn't work.

  Read the article

• What's the worst name you've seen for a product? [closed]

  - by Dean J

  (Community wiki from the start.) What's the worst name you've seen for a product? It might be a euphemism the company didn't know about, maybe something like Penetrode (from Office Space). It might be something impossible to do a web search on, like the band named "Download". It might be some combination of random syllables that's just awful. But no matter what, it's bad. What's the worst you've seen?

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >