Search Results

Search found 8358 results on 335 pages for 'external harddrive'.

Page 70/335 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

  • Is Infiniband going to get squeezed by iWARP and external QPI?

    - by andy.grover
    The Inquirer certainly thinks so.However, I'm not so sure it makes sense to compare Infiniband to an as-yet-unannounced optical external QPI. QPI is currently a processor interconnect. CPUs, RAM, and devices connected by it are conceptually part of the same machine -- they run a single OS, for example. They are both "networks" or "fabrics" but they have very different design trade-offs.Another widely-used bus in the system is closer to Infiniband than QPI -- PCI Express. Isn't it more likely that PCIe could take on IB? There are companies already who have solutions that use external PCI Express for cluster interconnect, but these have not gained significant market share. Why would QPI, a technology whose sweet spot is even further from Infiniband's than PCIe, be able to challenge Infiniband? It's hard to speculate without much information, but right now it doesn't seem likely to me.The other prediction made in the article is that Intel's 10GbE iWARP card could squeeze IB on the low end, due to its greater compatibility and lower cost.It's definitely never a good idea to bet against Ethernet when it comes to mass-market, commodity networking. Ethernet will win. 10GbE will win. But, there are now two competing ways to implement the low-latency RDMA Verbs interface on top of Ethernet. iWARP is essentially RDMA over TCP/IP over Ethernet. The new alternative is IBoE (Infiniband over Ethernet, aka RoCEE, aka "Rocky"). This encapsulates the IB packet protocol directly in the Ethernet frame. It loses the layer 3 routability of iWARP, but better maintains software compatibility with existing apps that use IB, and is simpler to implement in both software and hardware. iWARP has a substantial head start, but I believe that IBoE silicon will eventually be cheaper, and more likely to be implemented in commodity Ethernet hardware.I think IBoE is going to take low-end market share from traditional IB, but I think this is a situation IB hardware vendors have no problem accepting. Commoditized IBoE NICs invite greater use of RDMA features, and when higher performance is needed, customers can upgrade to "real" IB, maintaining IB's justification for higher prices. (IB max interconnect speeds have historically been 2-4x higher than Ethernet, and I don't see that changing.)(ObDisclosure: My current employer now sells IB hardware. I previously also worked at Intel. My opinions are my own, duh.)

    Read the article

  • How can I access the external microphone with Ubuntu?

    - by Charles Merriam
    Sound in Ubuntu, it has its own special joy. I would like my external microphone to work. Symptoms: I can play sound through the speakers I can play sound through the headsets. Plugging and and plugging headphone output correctly switches. I can record from the built-in microphone, using "Sound Recorder" and others. but: I cannot record from the external microphone. My Sound Preferences/Input panel has no option for an external microphone. If the answer is upgrade the ALSA drivers, please say exactly what to type. Thank you. ======== I'm using Ubuntu 9.10 Karmic Koala on a laptop (Gateway W3501), Sigmatel. That is: ~$ head -1 /proc/asound/card0/code* ==> /proc/asound/card0/codec#0 <== Codec: SigmaTel STAC9205 ==> /proc/asound/card0/codec#1 <== Codec: Conexant ID 2c06 ~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

    Read the article

  • What's the best way to format an external HDD for both OSX and Windows ?

    - by George Profenza
    I have an external HDD (1TB) and I'd like to use it on OSX and Windows. I had another external HDD using NTFS and I used NTFS-3G on osx to write files, but I found the reading/writing very slow. Googling a bit I see many people recommend HFS+ in conjuction with HFS Explorer for Windows. Is this the best way ? Is it possible to have two partitions, one HFS+ and one NTFS ? Is it a good option or is it better to use one partition ? I've seen this thread on using UDF for USB flash drive. Would that be suited for an USB external HDD ?

    Read the article

  • TextMate - completion using an external file or file contained in project?

    - by Neil Baldwin
    Does anyone know how to get TextMate to search an external file (or even the files contained in a TextMate "project") with which to perform word completion? I'm coding some stuff on the C64 (using TextMate to write the code) and I have an external file containing labels for all of the hardware registers/kernal routines e.g VIC2InteruptStatus = $D019 It would be really handy to be able to type, say, 'VIC2I' then press the key for word completion and have TextMate find matches in the external library file. Rather than how I'm having to do it at the moment by opening the library file and copy-paste the register names into my code.

    Read the article

  • How to use javascript functions, defined in some external *.js file in browser's javascript console?

    - by Dmytro Tsiniavsky
    I would like to know is it possible to save some, for example,simplemath.js file with function ADD(a, b) { return a + b; } simple function, run opera's or some other browser's javascript console, include somehow this (simplemath.js) file, call ADD(2, 5), and get a result in console or execute javascript code on current web page and manipulate with it's content. How can I do that? How can I use javascript functions from external files in web-browser's javascript console?

    Read the article

  • How to delete "System Volume Information" folder from external drives?

    - by Nadude
    I'm running Vista Prof 32bit on a lenovo w500 thinkpad. I have four external drives and use 4 different PCs, that all have system volume information folders, taking up lots of space, and I can't delete them. I don't even know which computer's files are backed up on which external. I've used Thinkvantage rescue and recovery to delete all backups, as well as checked system restore settings to only use my main C drive. I checked all the PC's to ensure only the Main drive keeps system restore points and deleted previous versions. I ran Disc Clean up too. But I can't figure out how to get rid of these large folders from my external drives.

    Read the article

  • How to build a web service to detect content change(s) at an external website?

    - by Global nomad
    I'm researching ways to build a web service to periodically traverse a predetermined list of web pages (of another external website) to detect if a page's content has changed from editing of the page, and deletion of the page. The end goal is to have this web service post push-notification events to mobile devices. FYI, I've searched and read "Questions with similar titles" here. Thank you for sharing your answers.

    Read the article

  • Should I be running VM's(Virtual Box) for development on the same hdd as my os or a external usb (2.0) HDD or usb (2.0) flash drive

    - by J. Brown
    I have a mac book pro (7200 rpm / 8GB ram) and I like the idea of virtualized development environments as I like to experiment with different technologies and don't like to have environmental cross contamination. I would like to know for the vm's I run (rarely 2 at time..almost always 1 vm at a time) should the virtual hdd be on my laptops native hdd or some external form (usb hdd, usb flash, or since i have mac express card based sad ?). I don't mind maxing out my ram to 16GB if thats a better option to have in the mix. Thank you

    Read the article

  • Is the load order for external javascript files different in IE8 compared to IE7?

    - by Benny
    Hello, I ask because I'm running an application in which I load an external script file in the HEAD section of the page, and then attempt to call a function from it in the onLoad section of the BODY tag. external.js function someFunction() { alert("Some message"); } myPage.html <html> <head> <script type="text/javascript" language="javascript" src="external.js"></script> </head> <body onLoad="someFunction();"> </body> </html> Using the developer tools in IE8, I get an exception thrown at the onLoad statement because, apparently, the external javascript file hasn't been loaded yet. I haven't had this problem come up in IE7 before, thus my question. Did they change the load order between IE7 and IE8? If so, is there a better way to do this? (the real function references many other functions and constants, which look much better in an external file) Thanks, B.J.

    Read the article

  • How to get Cocoa Emacs to jump to line number from external application?

    - by Fernando
    When using Carbon Emacs (v22) from an external application (ex. Unity 3D) files sent to Carbon Emacs would jump to the line number requested by the external application (ie. double click on an error message editor selected in preferences is started with file at error line number). For some reason the new Cocoa Emacs (v23) no longer does this. Instead it simply opens the file, but does not jump to the line number requested by the external application.

    Read the article

  • How to add external jar...through URL..using .classpath??

    - by Rahul
    **In any javaProject in eclipse there we always get .classpath file...like <?xml version="1.0" encoding="UTF-8"?> <classpath> <classpathentry path="ABC/junit" kind="src"/> <classpathentry path="org.eclipse.jdt.launching.JRE_CONTAINER" kind="con"/> <classpathentry path="org.eclipse.jdt.junit.JUNIT_CONTAINER/4" kind="con"/> <classpathentry path="targets" kind="output"/> </classpath> Here when we import any external jar it is giving path of that jar in classpathentry...i want that classpathentry should be from any URL which will provide that external jar...can anyone plz tell me how to do that..actually i want to add external jar automatically from URL(any) when user will import that project in eclipse..i don't want user will manually add external jars..i want to make change .classpath accordingly. Or anyother way to do this automatically. Please help me...Waiting for reply.**

    Read the article

  • Javascript: can I call a function in an external file from the main page ?

    - by Patrick
    hi, I'm loading from my main page an external js file, with a function. I have a flash file in the main page invoking the javascript function. Everything worked very well until when the javascript code was in the main file, but when I moved javascript to an external file the function seems not called anymore. So... there is no way to move the javascript code to an external file ? Or any other solution ? thanks

    Read the article

  • LogParser query to grab only external IP addresses from IIS logs?

    - by Josh
    I'm working on a public website that is used by both external visitors and internal employees. I'm after the external visitor hits, but I can't think of a good way to filter out the internal IP ranges. Using LogParser, what is the best way to filter IISW3C logs by IP range? This is all I've come up with so far, which can't possibly be the best or most efficient way. WHERE [c-ip] NOT LIKE (10.10.%, 10.11.%) Any help is appreciated.

    Read the article

  • Which external USB drives are compatable with 2003 server?

    - by Tony
    I have been using Seagate free agent GO drives on a windows 2003 server for backup. Sometimes I get a "Delayed Write Failed : Windows was unable to save all the data for the file F:\$Mft." error. I emailed Seagate technical support and the reply was "The product is not supported on Windows 2003 server." The WD elements external USB does not list 2003 as a supported OS. What is a good support external USB drive to use with Windows 2003 server?

    Read the article

  • Can we connect a laptop to an external normal monitor ?

    - by Nishant
    Can we connect a LAPTOP to an external monitor ? Here is my problem - http://superuser.com/questions/120269/compaq-presario-laptop-monitor-problems I want to buy a external monitor but the problem is that they come at huge cost and probably getting a new laptop or netbook seems wiser. So I am looking for cheap solutions .

    Read the article

  • Different DPI on MacBook Pro and external monitors - what options are there?

    - by Ollie G
    I have an external monitor connected to my MacBook Pro, the two screens have different DPIs. Ideally I would like them to be the same, but as this is not the case, the best option I can see is reducing the resolution of the MBP screen to bring its DPI as close as possible to the external monitor. This introduces scaling artefacts on the screen, as LCDs don't look good at non-native resolutions. Is there a standard or best way of handling this, and if not, what other options are available?

    Read the article

  • Virtualbox for Mac OS X - using an external USB drive, which filesystem is ideal?

    - by bencnscp
    Assuming that I am NOT going to add NTFS drivers that allow read+write of NTFS partitions, I was wondering if the choice of filesystem when I partition an external USB drive matters. The choices appear to be HFS+ vs. FAT32. For the time being, I simply created two half-sized paritions, one of each type. :) I plan to run various versions of Windows, and keep the VirtualBox files on the external drive.

    Read the article

  • How to change the "record external input" in Fraps?

    - by CyanPrime
    I'm using a TV to USB capture thingy called Hauppauge USB-Live2 (http://www.hauppauge.com/site/products/data_usblive2.html) and I'm using Media Player Classic Home Cinema to view my device's output, and finally I'm using Fraps to record the output off of MPC. It all works nicely except I can't get my mic to record, or even show up in the "Record External Input" area of Fraps while my Hauppauge is plugged in. My question is: How can I select my mic as the "record external input" in fraps?

    Read the article

  • Western Digital External 1TB HDD, possible to mount internally?

    - by JL
    I have an external WD MyBook. it has USB, Firewire and e-sata connectors, but I would like to mount it internally in my desktop system instead for extra performance, and I'm also considered about how long it will last externally. Does anyone know if this is possible? Has anyone done this with success? I would have to remove it from the existing external chasis, but before I mess around with this, I would like to know if its even possible. Thanks in advance

    Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >