Search Results

Search found 2792 results on 112 pages for 'inf ig sh'.

Page 70/112 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Configuring WPA WiFi in Ubuntu 10.10

  - by sma

  I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

  Read the article

• Bash Script Exits su or ssh Session Rather than Script

  - by Russ

  I am using CentOS 5.4. I created a bash script that does some checking before running any commands. If the check fails, it will simply exit 0. The problem I am having is that on our server, the script will exit the su or ssh session when the exit 0 is called. #!/bin/bash # check if directory has contents and exit if none if [ -z "`ls /ebs_raid/import/*.txt 2>/dev/null`" ]; then echo "ok" exit 0 fi here is the output: [root@ip-10-251-86-31 ebs_raid]# . test.sh ok [russ@ip-10-251-86-31 ebs_raid]$ as you can see, I was removed from my sudo session, if I wasn't in the sudo session, it would have logged me out of my ssh session. I am not sure what I am doing wrong here or where to start.

  Read the article

• Lingering tcp connection in LISTEN state

  - by Silvio Donnini

  My java application can sometimes be killed by an external script. This can be done either with SIGTERM or with SIGKILL. The application is a server which receives many connections per second, and it can be killed while trying to serve them. I would like to restart the application whenever it's killed, so I have prepared a script for that purpose. The problem is that, once the app has been killed, the new application instance can't bind to the port used by the previous instance, because the "Address is already in use". The previous instance's process has been definitely terminated, anyway the offending listening port is still there, but it is assigned to bash (or sh on other machines). Obviouly, my goal is to restart the application and let it bind successfully to the previous address. I've tried waiting more than 200 seconds before restarting to no avail, anyway I can't afford to wait that much. I've encountered this problem on all the machines I've ran the application (which is a jetty server with java 1.6). Any suggestion is appreciated, thanks, Silvio

  Read the article

• Conky - How to get weather alerts using rss?

  - by BeSlayed

  Quick question about how to get weather alerts with conky. I'm using the following bit of code: ${execpi 3600 ~/.conky/scripts/conky-rss.sh "http://www.weather.gov/alerts/wwarssget.php?zone=MDZ006"|sed '1,3d'|fold -sw 62} This (correctly) display a message to the effect "There are no weather alerts for ...." when there are no weather alerts. However, when there is an alert, it simply displays a message like "Short-term forecast for ..." with no further information. Any suggestions? How are other people getting weather alert info in their conkys?

  Read the article

• Error installing Arch Linux

  - by Garethj94

  So, I am trying to install Arch Linux on my Acer Aspire 4830tg, but I keep running into problems. Some background knowledge, I am trying to install Arch off a usb stick and I got the iso image using bittorrent. I am also trying to install it alongside of Windows 8 (which is already installed). So when I boot into Arch linux I get this error: :: Mounting '/dev/disk/by-label/ARCH_201212' to 'run/archiso/bootmnt' Waiting 30 seconds for device /dev/disk/by-label/ARCH_201212 ... ERROR: '/dev/disk/by-label/ARCH_201212' device did not show up after 30 seconds... Falling back to interactive prompt You can try to fix the problem manually, log out when you are finished sh: can't access tty; job control turned off I know that it will work if I run it on a virtual machine but whenever I try to install it on my laptop I keep getting this error. And since you can't register for the Arch forums without a Arch terminal to run their captcha command I can't ask this on their forums.

  Read the article

• Running scripts from another directory

  - by Desmond Hume

  Quite often, the script I want to execute is not located in my current working directory and I don't really want to leave it. Is it a good practice to run scripts (BASH, Perl etc.) from another directory? Will they usually find all the stuff they need to run properly? If so, what is the best way to run a "distant" script? Is it . /path/to/script or sh /path/to/script and how to use sudo in such cases? This, for example, doesn't work: sudo . /path/to/script

  Read the article

• Tomcat deployment overwrites context.xml

  - by Kristoffer

  Hi, I'm pretty new to Tomcat in general, so please point out if got anything wrong. My question is regarding updates to already deployed apps, using the Tomcat manager. But first thing first. I'm using the META-INF/Context.xml for storing connection info for the database connections, so this is unique to every server the application is deployed to. I'm not sure if this is optimal but it's the only way I know. So, when updating the application, it's important that this file doesn't get modified, because I don't want to have to go in and remake all changes every time I update my app. For updating, I'm using the Tomcat Manager, and I've tried different approaches but everything seems to build on the process of undeploy, then deploy the new version. This way, the Context.xml gets removed/replaced by an empty Context.xml file. So my question is basically, how do I update a running webapp, and at the same time having the Context.xml left untouched? Btw, I'm running Tomcat 6.0.24.

  Read the article

• DPMS, keep screen off when lid shut

  - by Evan Teran

  I have a laptop running linux. In my xorg configuration, I have DPMS setup so that the screen automatically turns off during several events. In addition to that I have to the following script tied to ACPI lid open/close events: #!/bin/sh for i in $(pidof X); do CMD=$(ps --no-heading $i) XAUTH="$(echo $CMD | sed -n 's/.*-auth \(.*\)/\1/p')" DISPLAY="$(echo $CMD | sed -n 's/.* \(:[0-9]\) .*/\1/p')" # turn the display off or back on export XAUTHORITY=$XAUTH /usr/bin/xset -display $DISPLAY dpms force $1 done Basically, this script takes one parameter ("on" or "off") then iterates through all of my running X sessions and either turns on or turns off the monitor. Here's my issue. When I close the lid of the laptop, the screen goes off as expected, but if a mouse event occurs (like if something bumps into the table...) then the screen turns back on even though it is closed (I can see the light through the side of the laptop). Is there a way to prevent the screen from turning on during a mouse event if the lid is closed?

  Read the article

• HP Officejet 4500 G510n-z Not Showing up in Remote Desktop (Terminal Services)

  - by Greg_the_Ant

  I installed this printer on a windows XP machine. First using the wireless option, and later using USB. In both cases when I connect to my other computer (also Windows XP) via terminal services and check printers in the local resources tab it does not show up on the remote session. I used to have a Samsung connected to my local computer over USB and and that worked fine over terminal services. Things I tried so far: I did read this page and installed the software fix on both computers: (Printers that use ports that do not begin with...) I installed the minimum HP software install on the remote computer and that didn't help either. I also tried running the add new printer wizard on the remote computer: I selected "local printer attached to this computer" and did not check the "automatically.." option. On the next page of the wizard I can select an option for "use the following port". I see options for TS001 through TS009 there. I'm assuming those are coming from the local machine. I tried clicking each one and then checking "have disk" and pointing it to C:\3be8dc611b11322e8ddf8a67\i386\msxpsdrv.inf 1 but for every single TS00.. port it says "The specified location does not contain information about your hardware." Any help would be greatly appreciated. I'm pretty stuck at this point. 1 C:\3be8dc611b11322e8ddf8a67 is the folder I extracted the HP driver software to after I downloaded it.

  Read the article

• No GUI after upgrade to Ubuntu 9.10 (boots to command line)

  - by Gathris

  I have just upgraded to Ubuntu 9.10 (network upgrade using the update manager, from 9.04 which had different graphics related problems) and when I try to boot into it all I get a small Ubuntu logo, flickering text and then the tty1 command line with a logon prompt. startx gives following error: Fatal server error: no screens found I traced down a tutorial that said I needed the latest graphics drivers (Gigabyte ATI Radeon 4650 HD installed with 9.10 catalyst drivers) so I did using the 'sh' command and a USB stick (I have a working Windows partition) and it installed fine but did not fix the problem. Edit: Thanks to UK and Arjan van Bentem below I was able to understand the full error message of start x: Parse error on lone 2 of /etc/X11/xorg.conf 'nameserver' is not a valid keyword in this section Fatal server error: no screens found This has nothing to do with a graphical error (sorry if I misled anyone) but the xorg.conf file has 3 lines in it and lines 2-3 have an entry 'nameserver'. Using the nano command I commented out (using a # before the entries) the nameservers and can now boot Ubuntu. Thanks to everyone for their help.

  Read the article

• How to use HTML markup tags inside Bash script

  - by CONtext

  I have crontab and a simple bash script that sends me emails every often containing PHP, NGINX, MYSQL errors from their log files. This is a simplified example. #/home/user/status.sh [email protected] PHP_ERROR=`tail -5 /var/log/php-fpm/error.log` NGINX_ERROR=`tail -5 /var/log/nginx/error.log` MYSQL_ERROR=`tail /var/log/mysqld.log` DISK_SPACE=`df -h` echo " Today's, server report:: ================================== DISK_SPACE: $DISK_SPACE --------------------------------- MEMORY_USAGE: $MEMORY_USAGE ----------------------------------- NGINX ERROR: $NGINX_ERROR ----------------------------------- PHP ERRORS: $PHP_ERROR ------------------------------------ MYSQL_ERRORS: $MYSQL_ERROR ------------------------------------- " | mail -s "Server reports" $EMAIL I know this is a very basic usage, but as you can see, I am trying to separate the errors, but not of the html tags including \n are working. So, my question is, is it possible to use HTML tags to format the text, if not .. then what are the alternatives.

  Read the article

• Automated git push attempt does not work - authentication issue

  - by at least three characters

  I'm trying to automate a very periodic git add/commit/push cycle using a shell script and cron under OS X 10.8.5. The script is as basic as one would expect it to be: cd /my/directory git add . git commit -m "a commit message with the date" git push -u origin master I've tried running it both as root as well as a non-root user. When I do this manually, I get a dialog box from OS X requesting that I authenticate the operation. Running the script (either using cron or just using sh) ends up sending a message (via mail) to whichever user's cron executed the script saying that it was unable to write a file in the .git directory because of a permissions issue (which is most likely manual execution requires authentication). Is there any way to circumvent this issue, or give the script permission to perform this operation without having me intervene each time?

  Read the article

• Close all Mac Terminal windows, but the one running a script

  - by Greg Brown

  I am trying to create a shell script that runs a python simulation programing in 4 terminal windows. I have the script that launches the program four times in four separate terminal windows(total of 5 windows, 4 for the python programs, and one to control the other terminal windows). I want to now create a script that I can run in the control terminal window that closes and kills the programs of the other four terminal windows, but still have the control one open. What I have so far is something like this #!/bin/sh osascript -e 'tell app "Terminal" do script "killall python" end tell' osascript -e 'tell app "Terminal" to quit' osascript -e 'tell app "Terminal" to open' The problem is that the last line doesn't work because it closes all the windows including the one the script is executing in. I am not really familiar with shell or apple script so any help would be welcomed. I posted on Stack, but I think this might be a better place for an automation type question. Thanks

  Read the article

• How could I easily pack a directory to an ext4 loop partition image?

  - by Alvin Wong

  I would like to pack the content of a directory into an ext4 partition image easily, without mounting a loop device. Background: I am building a version of Android which will mount system partitions as a loop device for ARM. Though I can create those partition images by hand using loop devices, it is very troublesome. I want to use an sh script to automatically do the work, and without needing to loop mount the dd-created image and use cp -rp. The best is to directly pack the files into an image file. Question: Is there any simple command-line tools without needing loop mount and root permission that can pack files into an ext4 partition image?

  Read the article

• Munin email notification

  - by Prashanth

  I am trying to get munin to notify me via email. I have configured munin and it reports critical and warning values but no alerts are being sent neither is any script being called. Can you please help me out with this? I have included part of the munin.conf below # Drop [email protected] and [email protected] an email everytime # something changes (OK -> WARNING, CRITICAL -> OK, etc) #contact.someuser.command mail -s "Munin notification" [email protected]\ contact.prashanth.command echo "Munin notification" | sendmail -t [email protected] contact.prashanth.always_send warning critical contact.root.command echo "Munin notification" | sendmail -t [email protected] contact.root.always_send warning critical contact.pipevia.command | /home/prashanth/script.sh /home/prashanth/script.sh None of this works. What am i missing here and why are emails not being sent? Thanks in advance. here is the munin-limits.log 2011/09/26 14:58:12 Opened log file 2011/09/26 14:58:12 [INFO] Starting munin-limits, getting lock /var/run/munin/munin-limits.lock 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[3] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[15] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[1] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[1] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 Baz? 2011/09/26 14:58:12 [INFO] munin-limits finished (0.02 sec) 2011/09/26 14:58:12 Command "prashanth" stderr: Munin notification - this is a test mail from the user prashanth | sendmail -t [email protected]

  Read the article

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• Sync Iphone in Windows XP running as Virtualbox guest under Ubuntu 9.10

  - by steveth45

  I run (K)Ubuntu 9.10 as my main operating system, but I still have a valid XP license, so I've been running Windows XP as a guest operating system with Virtualbox 3.10. I cannot get Itunes (running under Windows XP) to detect the presence of my Iphone. I found this link: http://blog.rootshell.be/2009/01/15/iphone-itunes-virtualbox/ which explains how to get this Itunes-in-XP-in-Virtualbox-under-Ubuntu configuration to work, but it involves editing the file /etc/init.d/mountdevsubfs.sh which apparently does not exist in Ubuntu 9.10. Does anyone know how get Itunes in XP running as a guest in Ubuntu 9.10 to detect and sync with an Iphone?

  Read the article

• rsync to windows (cygwin)

  - by abergmeier

  We have a windows file storage (don't ask) and now I want to rsync with the machine from Windows, Mac and Linux. So I installed freeSSHd (login shell is set to C:/cygwin64/bin/sh.exe), set up certificates and testing from Linux the test.dat has 0 bytes: ssh myuser@winmachinename "C:/cygwin64/bin/true.exe" > test.dat Even double checking with actual output works fine: ssh myuser@winmachinename "C:/cygwin64/bin/ls.exe" > test.dat Now, when I call rsync: rsync --progress -avz -e ssh myuser@winmachinename:/c/Users ~/test it fails with: protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(174) [Receiver=3.1.0] As far as reading the docs, this should not happen, when the first test is successful!? I am by now out of ideas - any recommendations how to debug this? EDIT: | OS | rsync version | |:--------------|:------------------------------------------| | Windows | rsync version 3.0.9 protocol version 30 | | Linux | rsync version 3.1.0 protocol version 31 |

  Read the article

• Installing GitBlit GO as Service in Ubuntu Server 14.04

  - by Luis Masuelli

  I downloaded it (version 1.6.0), unpacked it in /opt/gitblit (ubuntu server 14.04.1), configured http to 8280 and disabled https assigning 0 (I expose it by https using nginx). I created gitblit user and added it to 'sudo' group by running: sudo adduser gitblit sudo (gitblit user has a strong password). I installed it as a service by running: /opt/gitblit/install-service-ubuntu.sh. I tried to start it by running: sudo service gitblit start. The message Starting gitblit server appears. It's the only message. When I hit -in the same local machine- http://127.0.0.1:8280, the connection could not be made. When I run sudo netstat -anp | grep 8280, nothing appears. I see no error messages, but the server is not starting. Question: What am I missing?

  Read the article

• Unable to get prosody running on Ubuntu 10.04 (lua issues)

  - by user90374

  All this is performed on Ubuntu 10.04.4 LTS Server I installed LUA 5.1.4 following this procedure - http://ubuntuforums.org/showthread.php?t=1874860 I installed prosody following this command (after downloading the package) - sudo dpkg -i prosody_0.8.2-1_i386.deb After installation, I get the following error: I have tried to use as suggested luarock and sudo apt-get install to fix these. But still it keeps showing me these errors. Selecting previously deselected package prosody. (Reading database ... 59416 files and directories currently installed.) Unpacking prosody (from prosody_0.8.2-1_i386.deb) ... Setting up prosody (0.8.2-1) ... * Starting Prosody XMPP Server prosody ************** Prosody was unable to find luaexpat This package can be obtained in the following ways: Source: www[dot]keplerproject[dot]org/luaexpat/ Debian/Ubuntu: sudo apt-get install liblua5.1-expat0 luarocks: luarocks install luaexpat luaexpat is required for Prosody to run, so we will now exit. More help can be found on our website, at prosody[dot]im/doc/depends ************ Prosody was unable to find luasocket This package can be obtained in the following ways: Source: www[dot]tecgraf[dot]puc-rio[dot]br/~diego/professional/luasocket/ Debian/Ubuntu: sudo apt-get install liblua5.1-socket2 luarocks: luarocks install luasocket luasocket is required for Prosody to run, so we will now exit. More help can be found on our website, at prosody[dot]im/doc/depends ************ Prosody was unable to find LuaSec This package can be obtained in the following ways: Source: www[dot]inf[dot]puc-rio[dot]br/~brunoos/luasec/ Debian/Ubuntu: prosody[dot]im/download/start#debian_and_ubuntu luarocks: luarocks install luasec SSL/TLS support will not be available More help can be found on our website, at prosody[dot]im/doc/depends [fail] invoke-rc.d: initscript prosody, action "start" failed. dpkg: error processing prosody (--install): subprocess installed post-installation script returned error exit status 1 Processing triggers for man-db ... Processing triggers for ureadahead ... Errors were encountered while processing: prosody Thanks a lot for your patience and answers.

  Read the article

• How to start process as a daemon?

  - by Markus Johansson

  I have created a service which consists of a web fronted (nginx), python runner glue handler (uwsgi) and my own python code (fetcher). I have made a script (deploy.sh) to start the difference services: nginx uwsgi --ini inifie.ini python fetcher.py & disown My question is regarding how I start my python daemon. I want it to run in the background. It should not print anything to my current terminal. If I add "print" calls to my fetcher script I currently see them in the terminal window. So my question is: how do I start my fetcher.py script as a daemon?

  Read the article

• Is there a way I can use $PATH as defined by my bash profile?

  - by Adam Backstrom

  I spend most of my day ssh'd into servers. I have a series of aliases/functions/scripts that allow me to type p hostname from the terminal and execute GNU screen(1) on the remote side, using the following command: exec ssh hostname -t 'screen -RD'` I've only recently noticed that ssh -t does not get my custom $PATH. Here's some terminal output: adam@workstation:~:0$ sh server 'echo $PATH' /home/adam/bin:/usr/local/bin:/bin:/usr/bin:/opt/git/bin:/opt/git/libexec/git-core adam@workstation:~:0$ ssh server -t 'echo $PATH' /usr/local/bin:/bin:/usr/bin Connection to uranus.plymouth.edu closed. My biggest problem is my custom aliases only try to execute screen, since I can't guarantee an absolute path, and my $PATH is structured so the shell should find the correct one. If my $PATH settings aren't honored, my scripts don't work. Is there a way I can use $PATH as defined by my .bashrc/.bash_profile? I believe PermitUserEnvironment is disabled.

  Read the article

• cannot mount remote partition using fstab/fuse

  - by HorusKol

  Using a combination of http://ubuntu-tutorials.com/2007/01/02/mount-remote-directories-securely-with-ssh-ubuntu-6061-610/ and http://www.tuxfiles.org/linuxhelp/fstab.html I figured I could mount the root of another computer to somewhere on my new laptop to make it easier to transfer files and stuff. Now, I can connect through SSH and browser the files through an ad-hoc mount - but I would like to be able to do this automatically, and so had a look at fstab. my new entry in fstab is: remote_comp:/ /var/remote_comp fuse defaults 0 0 but testing with mount -a results in the following error: /bin/sh: remote_comp:/: not found I thought the problem was because I was trying to mount the root of the other computer, but even trying sub-directories result in the same error message.

  Read the article

• Can't log in via SSH to any accounts set to use /bin/bash as a default shell

  - by Gui Ambros

  I'm trying to install bash as the default shell on a ARM Linux running on an embedded device (Synology DS212+ NAS). But there's something really wrong, and I can't figure out what it is. Symptoms: 1) Root has /bin/bash as default shell, and can log in normally via SSH: $ grep root /etc/passwd root:x:0:0:root:/root:/bin/bash $ ssh root@NAS root@NAS's password: Last login: Sun Dec 16 14:06:56 2012 from desktop # 2) joeuser has /bin/bash as default shell, and receives "Permission denied" when trying to log in via SSH: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/bash $ ssh joeuser@localhost joeuser@NAS's password: Last login: Sun Dec 16 14:07:22 2012 from desktop Permission denied, please try again. Connection to localhost closed. 3) changing joeuser's shell back to /bin/sh: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/sh $ ssh joeuser@localhost Last login: Sun Dec 16 15:50:52 2012 from localhost $ To make things even more strange, I can log in as joeuser using /bin/bash using the serial console (!). Also a su - joeuser as root works fine, so the bash binary itself is working fine. In an act of despair, I changed joeuser's uid to 0 on /etc/passwd, but also didn't work, so it doesn't seem to be anything permission related. Seems that bash is doing some extra checking that sshd didn't like, and blocking the connections for non-root users. Maybe some sort of sanity checking - or terminal emulation - that is triggering the SIGCHLD, but only when called via ssh. I already went through every single item on sshd_config, and also put SSHD in debug mode, but didn't find anything strange. Here's my /etc/ssh/sshd_config: LogLevel DEBUG LoginGraceTime 2m PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile %h/.ssh/authorized_keys ChallengeResponseAuthentication no UsePAM yes AllowTcpForwarding no ChrootDirectory none Subsystem sftp internal-sftp -f DAEMON -u 000 And here's the output from /usr/syno/sbin/sshd -d, showing the failed attempt of joeuser trying to log in, with /bin/bash as the shell: debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: HPN Buffer Size: 87380 debug1: sshd version OpenSSH_5.8p1-hpn13v11 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: read PEM private key done: type ECDSA debug1: private host key: #2 type 3 ECDSA debug1: rexec_argv[0]='/usr/syno/sbin/sshd' debug1: rexec_argv[1]='-d' Set /proc/self/oom_adj from 0 to -17 debug1: Bind to port 22 on ::. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on 0.0.0.0 port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9 debug1: inetd sockets after dupping: 4, 4 Connection from 127.0.0.1 port 52212 debug1: HPN Disabled: 0, HPN Buffer Size: 87380 debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1-hpn13v11 SSH: Server;Ltype: Version;Remote: 127.0.0.1-52212;Protocol: 2.0;Client: OpenSSH_5.8p1-hpn13v11 debug1: match: OpenSSH_5.8p1-hpn13v11 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1-hpn13v11 debug1: permanently_set_uid: 1024/100 debug1: MYFLAG IS 1 debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: AUTH STATE IS 0 debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: client->server aes128-ctr hmac-md5 none SSH: Server;Ltype: Kex;Remote: 127.0.0.1-52212;Enc: aes128-ctr;MAC: hmac-md5;Comp: none debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: server->client aes128-ctr hmac-md5 none debug1: expecting SSH2_MSG_KEX_ECDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user joeuser service ssh-connection method none SSH: Server;Ltype: Authname;Remote: 127.0.0.1-52212;Name: joeuser debug1: attempt 0 failures 0 debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: PAM: initializing for "joeuser" debug1: PAM: setting PAM_RHOST to "localhost" debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user joeuser service ssh-connection method password debug1: attempt 1 failures 0 debug1: do_pam_account: called Accepted password for joeuser from 127.0.0.1 port 52212 ssh2 debug1: monitor_child_preauth: joeuser has been authenticated by privileged process debug1: PAM: establishing credentials User child is on pid 9129 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 9130 debug1: session_exit_message: session 0 channel 0 pid 9130 debug1: session_exit_message: release channel 0 debug1: session_by_tty: session 0 tty /dev/pts/1 debug1: session_pty_cleanup: session 0 release /dev/pts/1 Received disconnect from 127.0.0.1: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials Here you have the full output of sshd -dd, together with ssh -vv. Bash: # bash --version GNU bash, version 3.2.49(1)-release (arm-none-linux-gnueabi) Copyright (C) 2007 Free Software Foundation, Inc. The bash binary was cross compiled from source. I also tried using a pre-compiled binary from the Optware distribution, but had the exact same problem. I checked for missing shared libraries using objdump -x, but they're all there. Any ideas what could be causing this "Permission denied, please try again."? I'm almost diving in the bash source code to investigate, but trying to avoid hours chasing something that may be silly.

  Read the article

• Run Linux command as predefined user

  - by vijay.shad

  Hi all, I have created a shell script to start a server program. startup.sh start When above command will executes, it will try starts the server as adminuser. To achieve this my script has written like this. SUBIT="su - adminuser -c " SERVER_BOX_COMMAND_A="Server" ############## # Function to start cluster function start(){ $SUBIT "$SERVER_BOX_COMMAND_A" } When i execute the command it asks for password. Is there any other way to do this so, it will not ask for password. I have seen this behavior in Jboss startup script provided on jboss. That script changes the user to jboss and then starts the jboss server. I wanted my script to behave same way.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >