Search Results

Search found 4692 results on 188 pages for 'shuo ran'.

Page 70/188 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• running autobench (httperf)

  - by Matthew

  So I ran apt-get install httperf on my system and I can now run httperf. But how can I run 'autobench'? I downloaded the file and unarchived it and if I go in it and run autobench it says -bash command not found I think it's a perl script but if I run perl autobench, it says: root@example:/tmp/autobench-2.1.2# perl autobench Autobench configuration file not found - installing new copy in /root/.autobench.conf cp: cannot stat `/etc/autobench.conf': No such file or directory Installation complete - please rerun autobench Even if I run it again it says the same thing.

  Read the article

• some keys don't appear in xev

  - by sazary

  i can't change my screen brightness by pressing brightness keys on the keyboard, but they change through /sys/class/backlight/acpi_video0/brightness. so i started to diagnose the issue, ran xev and trying to see what happens when i press Fn+F5 or Fn+F6 which are brightness controls, and xev didn't show anything. i must note that it notifies my when i press volume controls, for example. are F5 and F6 keys working? yes, but not when i press them with Fn key. do i have any entry in xmodmap for brightness? yes: keycode 232 = XF86MonBrightnessDown NoSymbol XF86MonBrightnessDown keycode 233 = XF86MonBrightnessUp NoSymbol XF86MonBrightnessUp what's happening? and what should i do to correct it? i'm using vaio s series laptop with kubuntu precise on it. thanx ;)

  Read the article

• What are good and bad jitter times for a LAN

  - by garyb32234234

  Ive just ran jperf (frontend to iperf) on our network between 2 workstations, its recorded jitter between 0.033ms and 0.048ms. Is this good or bad? Are there more variables that i would need to consider to make the decision? EDIT: TCP/IP Ethernet LAN 43 PCs 1 server, 100Mbits main switch, various small 8 port switches, test was done using UDP, Its a Windows Domain. I want to instal a few voip softphones on the workstations, see how many i can use that reliably work, im testing a few different workstations around the network to see where the best quality network paths are. Will also change some equipment if i identify bad connections.

  Read the article

• MapReduce job is hung after 1 of 5 reducers completed on single-node environment

  - by Marboni

  I have only one Data Node on my dev environment on EC2. I ran heavy MR job and in 6 hours noticed that 100% of mappers and 20% of reducers finished (1 of reducer shows 100% competition, other ones - 0%). Looks like job is hung between 2 reducer runs. I don't see any errors in log files. What it can be? P.S. Last logs of successfully finished reducer: 2012-11-09 11:29:21,576 INFO org.apache.hadoop.mapred.Task: Task:attempt_201211090523_0004_r_000000_0 is done. And is in the process of commiting 2012-11-09 11:29:22,692 INFO org.apache.hadoop.mapred.Task: Task attempt_201211090523_0004_r_000000_0 is allowed to commit now 2012-11-09 11:29:22,719 INFO org.apache.hadoop.mapreduce.lib.output.FileOutputCommitter: Saved output of task 'attempt_201211090523_0004_r_000000_0' to /data/output/1352457275873/20121109-053433-common 2012-11-09 11:29:22,721 INFO org.apache.hadoop.mapred.Task: Task 'attempt_201211090523_0004_r_000000_0' done. 2012-11-09 11:29:22,725 INFO org.apache.hadoop.mapred.TaskLogsTruncater: Initializing logs' truncater with mapRetainSize=-1 and reduceRetainSize=-1

  Read the article

• Impossible do find motherboard drivers to Dell Dimension 3000

  - by Masziej

  Hello, I recently formatet and reinstalled XP on my girlfriends computer. Ive had this computer since 2001, never formatet it, until now =) Anyway the problem is that i cant find any drivers for the motherboard (integrated audio, video and ethernet). as i said its an old ass Dell. Cant remember if I got any cds along with it. Even if i did theyre gone a long time ago. So, I ran CPUZ and got this: --Motherboard-- Dell Computer Corp. Model 0K8980 And started googling. But didnt find any drivers. Still cant So im asking for a little help here. I really need to get the computer going before she wants a new one :D And yes i have looked on dells homesite, but they dont seem to wanna host drivers for their old stuff

  Read the article

• Resolve `strace` file number to a filename

  - by Mike Pennington

  I am debugging a problem where MoinMoin on CentOS is throwing a permissions error, but I can't track down where the problematic file / directory is. I ran strace -vp <pid> on the apache pid; when I have the problem I see this: epoll_wait(10, {{EPOLLIN, {u32=3487534344, u64=140367313734920}}}, 2, 10000) = 1 accept4(6, {sa_family=AF_INET6, sin6_port=htons(52621), inet_pton (AF_INET6, "::ffff:105.193.30.91", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, [28], SOCK_CLOEXEC) = 11 ## Later on... read(7, 0x7fffa658ad7f, 1) = -1 EAGAIN (Resource temporarily unavailable) However, since apache is already running, I see no corresponding open() on the file referred to as 7; thus I see the permissions problem, but I still don't know which file is the problem. I know I could try to catch all the file opens when I respawn apache, but I'm hoping there is a way to map file 7 to a real filename... is there a way to do this?

  Read the article

• Justification of Amazon EC2 Performance

  - by Adroidist

  I have a .jar file that represents a server which receives over TCP an image in bytes (of size at most 500 kb) and writes it file. It then sobels this image and sends it over TCP socket to the client side. I ran it on my laptop and it was very fast. But when I put it on Amazon EC2 server m1.large instance, i found out it is very slow - around 10 times slower. It might be the inefficiency in the code algorithm but in fact my code is nothing but receive image (like any byte file) run the sobel algorithm and send. I have the following questions: 1- Is it normal performance of Amazon EC2 server- I have read the following links link1 and link2 2- Even if the code is not that efficient, the server is finally handling a very low load (just one client), does the "inefficient" code justify such performance? 3- My laptop is dual core only...Why would the amazon ec2 server have worse performance that my laptop? How is this explained? Excuse me for my ignorance.

  Read the article

• Am I using too much memory? (Rails on EC2 with Resque)

  - by Stpn

  I am looking at the memory usage of the Rails application (it uses background processes via Resque) and since the common answer to the question, "how many workers is too many" was "test and see", I ran some memory commands and wonder if someone can help figuring if the memory usage is high enough already, or I can still add some extra workers.. so (this is all under the maximum load): $ free -t -m total used free shared buffers cached Mem: 1756 1532 223 0 12 229 -/+ buffers/cache: 1291 464 Swap: 895 10 885 Total: 2652 1543 1108 $ vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 10588 156172 13400 326476 1 6 4 0 5 4 1 0 99 0 If there is any extra info I can provide to help answer this, I would be happy to do so. If the question is strange in some way, please let me know I'd be glad to fix etc..

  Read the article

• NetDiag + TCP Blocking?

  - by CrazyNick

  We are facing some issue with the sharepoint 2007 timer jobs everyday at a specific time, so decide to track the tcp blocking informartion during those hours using NetDiag tool. We are not able to find the required information if we uses "netdiag /test:ipsec", what is the command that can be used to pull the TCP blocking information and how to configure it? if i ran the command "netdiag /test:ipsec /debug" it is returning "IP Security test . . . . . . . . . : Skipped", what does it mean?

  Read the article

• I just deleted "/bin". What's the best way to recover?

  - by Tom Marthenal

  I just ran (not on purpose!) rm -rf /bin. I've booted down the computer and am using Finnix to try to recover from it. I have succeeded in mounting the drive, and confirmed that, yes, the entire /bin folder is deleted. Is it possible to recover from this without reinstalling the OS? I'm thinking that I could setup a VM with the same OS and architecture (Ubuntu Server 11.10 alpha release, x86) and install all the packages I had installed on the server, then just copy the /bin folder. Will this work? Am I better off just starting over?

  Read the article

• Explorer.exe - No such interface supported and other issues

  - by tom

  The problem started when I uninstalled my ATI graphics driver and i used a driver cleaner. After i restarted win7 and it got to POST the screen just went completely blank. So i Used system restore from the repair menu to get back on. I found out that if I ran chkdsk the display just goes black after restart on startup and i have to use system restore to get back on windows7 not sure why this is. When i right click desktop and choose 'Screen Resolution' it says No such interface supported. Also when I click items such as device manager in the windows explorer it does not do anything. I have tried re-registering the DLLS but that did not do anything.

  Read the article

• Can't connect to Internet through WiFi, but can with cable

  - by aldy505

  I'm using Windows 7 32-bit, Toshiba Portege laptop. I want to connect to the WiFi, usually I can do that easily. But, I don't know.. maybe when I tried to install a Microsoft Research: Mesh Virtual WiFi that could connect more than 2 wireless networks. I wanna try in connecting both Wireless router and my personal Ad-Hoc. Now, my laptop don't recognize my WiFi, well, I can connect to the WiFi but it says: "Limited access" and doesn't really connect to the internet. But when I plug the LAN cable, it works. I know the problem is in the laptop's wireless connection or in the properties. Any help for this? UPDATE: The IP and DNS settings, I set to automatic, and when I ran diagnostic, Windows tells me that the wireless network adapter is the problem, but they told me to insert the LAN cable, so how to fix the wireless? They didn't tell me how to fix that.

  Read the article

• Unable to run Microsoft Office 2010 install file

  - by Len

  This problem began when I noticed that the icons in the Windows 7 task bar for MS Word and Outlook were generic. I rebuilt the icon cache. Still not the right icons, but not the generic "document" icons either, and both are identical (to each other). The two programs seem to be working OK. So then I tried to repair MS Office. I ran the setup file. It extracts the files, I get the splash screen, and then the message, "Setup has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." with a "Close program" button. Microsoft does not notify me about a solution. What I have tried: 1. running two other copies of the setup program; 2. doing an in-place re-install of Windows 7.

  Read the article

• Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion

  - by wjlafrance

  I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

  Read the article

• Truecrypt system partion partially encryted but then drive corrupted and won't boot - decrypting so I can access files to backup?

  - by Dr.Seuss

  So I was attempting to encrypt my (Windows 7) system drive with Truecrypt and it stopped at around 15% and said that there was a segment error and that it could not proceed until it was fixed. So, I restarted the computer and ran HDD Regenerator which subsequently fixed the bad sectors on the drive, but now my system cannot boot. So, I run a number of recovery disks to no avail (Windows repair is unable to fix) and the drive won't mount on a linux version run from a CD because the drive is encrypted. So I tried mounting the drive using Truecrypt under the Linux distribution on the disk and selected "Mount partition using system encryption without pre-boot authentication" so I can decrypt, but I get an error message about it only being possible once the entire system is encrypted. How do I get out of this mess? I need to be able to back up the data that's on that partially encrypted drive so I can reinstall my operating system.

  Read the article

• How to delete "System Volume Information" folder from external drives?

  - by Nadude

  I'm running Vista Prof 32bit on a lenovo w500 thinkpad. I have four external drives and use 4 different PCs, that all have system volume information folders, taking up lots of space, and I can't delete them. I don't even know which computer's files are backed up on which external. I've used Thinkvantage rescue and recovery to delete all backups, as well as checked system restore settings to only use my main C drive. I checked all the PC's to ensure only the Main drive keeps system restore points and deleted previous versions. I ran Disc Clean up too. But I can't figure out how to get rid of these large folders from my external drives.

  Read the article

• How do I troubleshoot a server I can't get logged into?

  - by Karl

  This morning I am unable to log into SQL Server because it appears to be busy doing something, so much so that CPU usage is constantly at 98%-99%. I am guessing that something has gone wrong with the maintenance plan that ran over the weekend, but I can't get into the error logs see what is happening. On logging in I keep getting messages like "insufficiently memory in the buffer pool" and "the server is not responding". Is there any way I can figure out what is happening without logging onto to the server? Or some way I can squeeze in a login?

  Read the article

• File Transfer Protocol (FTP) Service won't install

  - by user64204

  Hi all, Problem description: -I'm running Windows Server 2003 and I'm trying to install the FTP service following this procedure: http://support.microsoft.com/kb/323384 -At step 7 of the above procedure I provide Windows Small Business Server 2003 disc1 and the installation completes successfully (note: the installer looks for 'ftpctrs2.dll' but the disk contains 'FTPCTRS2.DL_' and seems happy with it as per allowed file types). -However the installation silently fails because if I go back to the list of windows components, FTP is still unchecked, and if I open IIS, the FTP sites section is missing. Question: -How can I force the installation of FTP? Additional info: I don't think this is related but will mention it in case I'm wrong and it is: before I could attempt to install FTP I ran into, and fixed, the issue described in this solution: http://support.microsoft.com/kb/838860 Thanks.

  Read the article

• Issue with Windows Server backup

  - by mamu

  I have windows server 2008 r2 installed, Only service running on it is hyper-v. I am trying to take backup using windows server backup feature and it fails with following error in eventlog The backup operation that started at '?2009?-?08?-?22T18:42:14.123000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved. Above error itself is point to other event logs for more detail but i can't find anything in event logs Then i ran following command vssadmin list writers It had following out of ordinary in list Writer name: 'Microsoft Hyper-V VSS Writer' Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} Writer Instance Id: {d15c5f78-121c-464f-b23b-f285e919b05c} State: [8] Failed Last error: Inconsistent shadow copy How could i resolve this?

  Read the article

• how to install OpenSSL in windows 7 and also how to check, its enabled or not?

  - by Andy

  how to install OpenSSL in windows 7 and also how to check, its enabled or not? I currently run php through the command line locally not on a server. Thanks I recently installed php 5.2.17 I ran a program which connect with a https server and I got the following error Notice: file_get_contents(): Unable to find the wrapper "https" - did you forget to enable it when you configured PHP? in C:\java\newsweaver-api-v2\simple\list- tags.php on line 30 I added extension=php_openssl.dll to php.ini but I'm wondering is openssl native to php 5.2.17 or do I need to download an extntion. Thanks

  Read the article

• Eliminating Windows 7 user tracking registry writes

  - by caffiend

  Windows 7 continues the practice of saving user actions in the registry. I'd like to disable this practice both to avoid reg-file fragmentation and SSD wear, as well as being uncomfortable with programs being able to quickly analyze my usage habits. Even with the "Turn off user tracking" policy enabled, there are at least two areas that still contain user tracking: HKCU\Software\Classes\Local Settings\MuiCache This key stores a cache of most-recently accessed strings, including most-recently ran exe descriptions. MKCU\Software\Classes\Local Settings\Software\Microsoft Windows\Shell\BagMRU This directory stores the most recently viewed folders along with timestamps. Are there additional policy settings/registry entries to disable these writes? If not, is it possible to make these entries Volatile? Would it be practical to create a temporary hive (eg, on ramdisk) and map it over this location?

  Read the article

• how can I get back /usr/local/bin/mysql on Snow Leopard?

  - by Ole Media

  From terminal and trying to uninstall macports, I ran a command, rm -rf / macports...., that erased bunch of stuff. I feel ashamed about this, not realizing the space after /. Since then, mysql is running but I cannot execute any of the mysql commands because it is not under /usr/local/bin/ I went ahead an reinstall mysql but without luck. What steps do you recommend on doing in order to be able to run mysql, mysqlduml, mysqladmin, from terminal? I can access databases from phpmyadmin, so mysql is running, don't ask me how.

  Read the article

• Web server suddenly stopped working

  - by wezten

  I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

  Read the article

• Recover Bios HP DV9700T windows 7 64

  - by petebob796

  I downloaded the latest DV9700t bios (.59) and ran the update tool in windows 7 64. This seemed to go ok and did the usual system will shutdown in 10 seconds dialog. Updon the reboot nothing happens I get no BIOS screen or anything so I think the bios update went wrong. Which I am annoyed about I have never known a bios update to fail before and lots of people on the internet seem to have had the same problem with the same model. There is a way to recover apparently using crisdisk utility and creating a bootable usb key then holding win+b at power on, unfortunately the utility to make the disk doesn't seem to work in 64 bit versions of windows, the only type I have easy access to. Anyone know a way to create the boot disk in 64?

  Read the article

• Need help to properly remove duplicates in NHibernate

  - by Michael D. Kirkpatrick

  Here is the problem I am having. I have a database with over 100 records in it. I am paging through the data to get 9 results at a time. When I added a check to see if items are active, it caused the results to start doubling up. A little background: "Product" is the actual product line "ProductSkus" are the actual products that exist in the product line When there is more then 1 ProductSku within Product, it causes a duplicate entry to be returned. See the NHibernate Query below: result = this.Session.CreateCriteria<Model.Product>() .Add(Expression.Eq("IsActive", true)) .AddOrder(new Order("Name", true)) .SetFirstResult(indexNumber).SetMaxResults(maxNumber) // This part of the query duplicates the products .CreateAlias("ProductSkus", "ProdSkus", JoinType.InnerJoin) .Add(Expression.Eq("ProdSkus.IsActive", true)) .CreateAlias("ProductToSubcategory", "ProdToSubcat") .CreateAlias("ProdToSubcat.ProductSubcategory", "ProdSubcat") .Add(Expression.Eq("ProdSubcat.ID", subCatId)) // This part takes out the duplicate products - Removes too many items... // Turns out that with .SetFirstResult(indexNumber).SetMaxResults(maxNumber) // it gets 9 records back then the duplicates are removed. // Example: // Total Records over 100 // Max = 9 // 4 Duplicates removed // Yields 5 records when there should be 9 // Why??? This line is ran in NHibernate on the data after it has been extracted from the SQL server. .SetResultTransformer(new NHibernate.Transform.DistinctRootEntityResultTransformer()) .List<Model.Product>(); I added the DistinctRootEntityResultTransformer to clean up the duplicates. The problem is that it pulls 9 records back that contains duplicates. DistinctRootEntityResultTransformer then cleans up the duplicates in the 9 records. I am basically needing a distinct statement to be ran on the SQL server to begin with. However, distinct on SQL is not going to work since NHibernate by default wants to add every field from every table in the select part of the statement. I am only using the fields that belong to the root table to begin with (Model.Product). If I can tell NHibernate to not add the fields to the joined tables into the select part of the statement along with adding Distinct, it would work. I use NHibernare Profiler to see the actual query: SELECT top 9 this_.ID as ID351_3_, this_.Name as Name351_3_, this_.Description as Descript3_351_3_, this_.IsActive as IsActive351_3_, this_.ManufacturerID as Manufact5_351_3_, prodskus1_.ID as ID373_0_, prodskus1_.Description as Descript2_373_0_, prodskus1_.PartNumber as PartNumber373_0_, prodskus1_.Price as Price373_0_, prodskus1_.IsKit as IsKit373_0_, prodskus1_.IsActive as IsActive373_0_, prodskus1_.IsFeaturedProduct as IsFeatur7_373_0_, prodskus1_.DateAdded as DateAdded373_0_, prodskus1_.Weight as Weight373_0_, prodskus1_.TimesViewed as TimesVi10_373_0_, prodskus1_.TimesOrdered as TimesOr11_373_0_, prodskus1_.ProductID as ProductID373_0_, prodskus1_.OverSizedBoxID as OverSiz13_373_0_, prodtosubc2_.ID as ID362_1_, prodtosubc2_.MasterSubcategory as MasterSu2_362_1_, prodtosubc2_.ProductID as ProductID362_1_, prodtosubc2_.ProductSubcategoryID as ProductS4_362_1_, prodsubcat3_.ID as ID352_2_, prodsubcat3_.Name as Name352_2_, prodsubcat3_.ProductCategoryID as ProductC3_352_2_, prodsubcat3_.ImageID as ImageID352_2_, prodsubcat3_.TriggerShow as TriggerS5_352_2_ FROM Product this_ inner join ProductSku prodskus1_ on this_.ID = prodskus1_.ProductID and (prodskus1_.IsActive = 1) inner join ProductToSubcategory prodtosubc2_ on this_.ID = prodtosubc2_.ProductID inner join ProductSubcategory prodsubcat3_ on prodtosubc2_.ProductSubcategoryID = prodsubcat3_.ID WHERE this_.IsActive = 1 /* @p0 */ and prodskus1_.IsActive = 1 /* @p1 */ and prodsubcat3_.ID = 3 /* @p2 */ ORDER BY this_.Name asc If I hand modify the query and run it directly on the SQL server I get the result set I want (I removed all the extra fields in the select section and added DISTINCT): SELECT DISTINCT top 9 this_.ID as ID351_3_, this_.Name as Name351_3_, this_.Description as Descript3_351_3_, this_.IsActive as IsActive351_3_, this_.ManufacturerID as Manufact5_351_3_, FROM Product this_ inner join ProductSku prodskus1_ on this_.ID = prodskus1_.ProductID and (prodskus1_.IsActive = 1) inner join ProductToSubcategory prodtosubc2_ on this_.ID = prodtosubc2_.ProductID inner join ProductSubcategory prodsubcat3_ on prodtosubc2_.ProductSubcategoryID = prodsubcat3_.ID WHERE this_.IsActive = 1 /* @p0 */ and prodskus1_.IsActive = 1 /* @p1 */ and prodsubcat3_.ID = 3 /* @p2 */ ORDER BY this_.Name asc The big question I now must ask is... What must I change in the NHibernate Query to ultimately get the exact same result? Thanks in advance.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >