Search Results

Search found 4909 results on 197 pages for 'vendor lock in'.

Page 70/197 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Cisco SA520 to Adtran 1234 no DHCP transfer

  - by Grico

  I am trying to set up a Cisco SA520 to run DHCP on my network. I have a vendor provided switch, the Adtran 1234, and it provides DHCP for our phone systems on VLAN 200. I do not have access to the Adtran, but the vendor gave me a IP on port 1 for WAN and said port 2 should be for the "trust" side should go. I did setup a mini lab where, Adtran 1 went to SA520 WAN port, and SA520 trust 1 went to my laptop. Everything worked fine, I could ping and get internet using the DHCP scope I put on the SA520. I then unplugged my computer from SA520 trust 1 and plugged it into Adtran 2. I plugged my computer into Adtran 23 and I dont get DHCP or even a link light. If I restart my machine, I get a brief link and then it dies once the machine boots. I have tried several ports on the Adtran and none seem to work. Different cables as well. However, when I plug a phone into the Adtran, the phone boot immediately and shows link. Thoughts?

  Read the article

• jboss 5.1 mysql connection pooling

  - by boyd4715

  I am using JBOSS 5.1.0.GA, MySQL 5.5 and Hibernate 3.3.1 GA (included with JBOSS) + Spring. My question is do I need to add c3p0 as a data source in my spring/hibernate configuration for connection pooling or are the setting in the JBOSS mysql-ds.xml setting enough. My mysql-ds.xml is the following: <datasources> <local-tx-datasource> <jndi-name>MySqlDS</jndi-name> <connection-url>jdbc:mysql://localhost:3306/ecotrak</connection-url> <driver-class>com.mysql.jdbc.Driver</driver-class> <user-name>ecotrak</user-name> <password>ecotrak</password> <min-pool-size>5</min-pool-size> <max-pool-size>20</max-pool-size> <idle-timeout-minutes>5</idle-timeout-minutes> <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter</exception-sorter-class-name> <!-- should only be used on drivers after 3.22.1 with "ping" support --> <valid-connection-checker-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLValidConnectionChecker</valid-connection-checker-class-name> <!-- sql to call when connection is created <new-connection-sql>some arbitrary sql</new-connection-sql> --> <!-- sql to call on an existing pooled connection when it is obtained from pool - MySQLValidConnectionChecker is preferred for newer drivers <check-valid-connection-sql>some arbitrary sql</check-valid-connection-sql> --> <!-- corresponding type-mapping in the standardjbosscmp-jdbc.xml (optional) --> <metadata> <type-mapping>mySQL</type-mapping> </metadata> </local-tx-datasource> </datasources>

  Read the article

• Startup script for Red5 on Ubuntu 9.04

  - by user49249

  I am creating startup script for Red5 on Ubuntu. Red5 is installed in /opt/red5 Following is a working script on a CentOS Box on which Red5 is running [code] ==========Start init script ========== #!/bin/sh PROG=red5 RED5_HOME=/opt/red5/dist DAEMON=$RED5_HOME/$PROG.sh PIDFILE=/var/run/$PROG.pid # Source function library . /etc/rc.d/init.d/functions [ -r /etc/sysconfig/red5 ] && . /etc/sysconfig/red5 RETVAL=0 case "$1" in start) echo -n $"Starting $PROG: " cd $RED5_HOME $DAEMON >/dev/null 2>/dev/null & RETVAL=$? if [ $RETVAL -eq 0 ]; then echo $! > $PIDFILE touch /var/lock/subsys/$PROG fi [ $RETVAL -eq 0 ] && success $"$PROG startup" || failure $"$PROG startup" echo ;; stop) echo -n $"Shutting down $PROG: " killproc -p $PIDFILE RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$PROG ;; restart) $0 stop $0 start ;; status) status $PROG -p $PIDFILE RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|status}" RETVAL=1 esac exit $RETVAL [/code] What do I need to replace for Ubuntu in the above script. My Red5 is in /opt/red5/ and to start it manually I always do /opt/red5/dist/red5.sh from Ubuntu As I did not find rc.d/functions on Ubuntu on my laptop also /etc/init.d/functions I did not existed. I would like to be able to use them with service as Red hat distributions do. I checked /lib/lsb/init-functions.

  Read the article

• Weird .#filename files on remote ssh-connected systems after mcedit

  - by etranger

  I'm using MacFusion sshfs in combination with Midnight Commander, and when I edit remote text files with mcedit, weird symlinks are created on the remote system. $ ls -l .* lrwxr-xr-x 1 user group 34 Jun 27 01:54 .#filename.txt -> [email protected] where etranger is my local login name, and mbp is a hostname of my notebook running MacOS. symlinks can be removed by running remote rm command, but cannot be deleted on the mac-fuse mounted volume and thus pollutes the filesystem. I cannot figure what part of software is responsible for this, and how I could fix this, any help is appreciated. EDIT: This appears to be mcedit behavior as documented here: https://dev.openwrt.org/ticket/8245 Apparently, sshfs fails to remove symlink to the lock file for some reason (".#" in filename, perhaps), and it pollutes the filesystem. A quick workaround is possible, using another bug of Midnight Commander: editing (F4) the broken symlink effectively converts it to a missing lock file it was supposed to point to, and removes the symlink itself. The newly created file may then be deleted normally. EDIT 2: Unchecking "Follow symlink" in MacFusion apparently allows sshfs to remove dead symlinks, so the problem disappears completely.

  Read the article

• How can I restore my original IME Romaji input settings?

  - by JOhn K

  the this one, Japanese IME on Windows: switch back to romaji input method (3) did not help. The problem seems the same. My Vista home premium version PC, I had been using Microsoft IME to use English and Japanese input using romaji henkan for a long time. One day, all of a sudden, first when I started up the PC, it has cap lock indicator ON. So, I press SHIFT key, CAP lock indicator is off!(This I have to do every morning.) Now when I want to type romaji input to change to Japanese, I switch EN English (United States) to "JP Japanese (Japan) and select input to hiragana input. It worked until that day. But now when I set to input romaji for hiragana as I used to do and start typing, then it shows Japanese hiragana directly on the display just as keyboard setting as Japanese ???109???????? as shown in Wikipedia JIS keyboard. And I cannot show hiragana as I wanted ( I can convert to Kanji OK) etc. by hitting space key. But its key board arrangement is what I never learned. Other thing I found is when I hit "`" key, it switches between hiragana and alphabet. When I see Control panel setting it is the same setting as I have seen. Please suggest me a solution to get the original setting for IME input mode as I used to do. John K.

  Read the article

• help with xorg.conf: xrandr on one of two widescreen monitors; rhel5, kde, ATI Radeon X1300

  - by user35997

  Can anyone help with me configure my dual-screen monitors for rotation? I have xrandr 1.1. Have tried various approaches, nothing takes. I can't even get the xrandr options to show up in KDE's Display control panel. Thanks1 My lspci output: 03:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] My current xorg.conf (works, minus screen rotation): # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "Multihead layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "off" Option "Clone" "on" EndSection Section "Files" EndSection Section "Module" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Dell 2407WFP (Digital)" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "dpms" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "Videocard0" Driver "vesa" EndSection Section "Device" Identifier "Videocard1" Driver "vesa" VendorName "Videocard Vendor" BoardName "ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" Option "DesktopSetup" "horizontal" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection

  Read the article

• Server configurations for hosting MySQL database

  - by shyam

  I have a web application which uses a MySQL database hosted on a virtual server. I've been using this server when I started the application and when the database was really small. Now it has grown and the server is not able to handle the db, causing frequent db errors. I'm planning to get a server and I need suggestions for that. Like I said, the db is now 9 GB, and is growing considerably fast. There are a number of tables with millions of rows, which are frequently updated and queried. The most frequent error the db shows is Lock wait timeout exceeded. Previously there used to be "The total number of locks exceeds the lock table size" errors too, but I could avoid it by increasing Innodb buffer pool size. Please suggest what configurations should I look for in the server I should buy. I read somewhere that the db should ideally have a buffer pool size greater than the size of its data, so in my case I guess I'd need memory gt 9 GB. What other things should I look for in the server? Just tell me if I should give you more info about the

  Read the article

• ephemeral vs EBS partitions

  - by hortitude

  I launched an EBS backed AMI with all the defaults. I noticed that it automicatlly had attached an ephemeral disk. I was just wondering if there was a good programtic way to know that this particular device is ephemeral vs some EBS volume I had decided to attach: ubuntu@-----:~$ df -ahT Filesystem Type Size Used Avail Use% Mounted on /dev/xvda1 ext4 7.9G 867M 6.7G 12% / proc proc 0 0 0 - /proc sysfs sysfs 0 0 0 - /sys none fusectl 0 0 0 - /sys/fs/fuse/connections none debugfs 0 0 0 - /sys/kernel/debug none securityfs 0 0 0 - /sys/kernel/security udev devtmpfs 1.9G 12K 1.9G 1% /dev devpts devpts 0 0 0 - /dev/pts tmpfs tmpfs 751M 172K 750M 1% /run none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 0 1.9G 0% /run/shm /dev/xvdb ext3 394G 199M 374G 1% /mnt ubuntu@-----:~$ mount /dev/xvda1 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/xvdb on /mnt type ext3 (rw,_netdev)

  Read the article

• apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName

  - by user35402

  I keep getting this warning when I (re)start Apache. Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName ... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [ OK ] This is the content of my etc/hosts file: #127.0.0.1 hpdtp-ubuntu910 #testproject.localhost localhost.localdomain localhost #127.0.1.1 hpdtp-ubuntu910 127.0.0.1 localhost 127.0.0.1 testproject.localhost 127.0.1.1 hpdtp-ubuntu910 # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts This is the content of my /etc/apache2/sites-enabled/000-default file: <VirtualHost *:80> ServerName testproject.localhost DocumentRoot "/home/morpheous/work/websites/testproject/web" DirectoryIndex index.php <Directory "/home/morpheous/work/websites/testproject/web"> AllowOverride All Allow from All </Directory> Alias /sf /lib/vendor/symfony/symfony-1.3.2/data/web/sf <Directory "/lib/vendor/symfony/symfony-1.3.2/data/web/sf"> AllowOverride All Allow from All </Directory> </VirtualHost> When I go to http://testproject.localhost, I get a blank page can anyone spot what I am doing wrong?

  Read the article

• Get IP or MAC addresses of Windows Multipoint Server 2012 stations?

  - by user1454265

  Is it possible to programmatically retrieve the IP or MAC address of a station assigned to a Windows MultiPoint Server 2012 host, using PowerShell or any other .NET or Windows API? Background: I'm developing a application to help set up USB-over-Ethernet zero clients in a WMS 2012 setup, bridging the PowerShell "WmsCmdlets" module (Microsoft.WindowsServerSolutions.MultipointServer.PowerShell.Commands.Library.WmsStation) and a third-party vendor API for configuring zero client IP address, etc. So far, I do not know any means of matching up the "stations" of the WmsCmdlets with the zero client objects in the vendor's API. Finding out the IP or MAC associated with a WMS station would do nicely, since I have this on the zero client API side. However, I haven't found any information I could use in the PowerShell WmsCmdlets module, such as Get-WmsStation which returns the following: Id : 1 Name : <my station name> IsAutoLogOn : False IsSplit : False CollabId : 0 RemoteConnectionServerName : VirtualMachineName : VirtualMachineId : AutoLogOnUserName : AutoLogOnPassword : DeviceTypes : {DT_Mouse, DT_Keyboard, DT_Audio, DT_MassStorage...} DeviceCounts : {2, 2, 0, 0...} ComputerName : <my WMS host server name> SessionId : 4294967295 SessionHostServer : <my WMS host server name>

  Read the article

• Recover mysql database - mysqldump gives "table <tablename> doesn't exist (1146)"

  - by Matthew

  Backstory Ubuntu died (wouldn't boot) and I couldn't fix it. I booted a live cd to recover the important stuff and saved it to my NAS. One of the things I backed up was /var/lib/mysql. Reinstalled with Linux Mint because I was on Ubuntu 10.0.4 this was a good opportunity to try a new distro (and I don't like Unity). Now I want to recover my old mediawiki, so I shut down mysql daemon, cp -R /media/NAS/Backup/mysql/mediawiki@002d1_19_1 /var/lib/mysql/, set file ownership and permissions correctly, and start mysql back up. Problem Now I'm trying to export the database so I can restore the database, but when I execute the mysqldump I get an error: $ mysqldump -u mediawikiuser -p mediawiki-1_19_1 -c | gzip -9 > wiki.2012-11-15.sql.gz Enter password: mysqldump: Got error: 1146: Table 'mediawiki-1_19_1.archive' doesn't exist when using LOCK TABLES Things I've tried I tried using --skip-lock-tables but I get this: Error: Couldn't read status information for table archive () mysqldump: Couldn't execute 'show create table `archive`': Table 'mediawiki-1_19_1.archive' doesn't exist (1146) I tried logging in to mysql and I can list the tables that should be there, but trying to describe or select from them errors out the same way as the dump: mysql> show tables; +----------------------------+ | Tables_in_mediawiki-1_19_1 | +----------------------------+ | archive | | category | | categorylinks | ... | user_properties | | valid_tag | | watchlist | +----------------------------+ 49 rows in set (0.00 sec) mysql> describe archive; ERROR 1146 (42S02): Table 'mediawiki-1_19_1.archive' doesn't exist I believe mediawiki was installed using innodb and binary data. Am I screwed or is there a way to recover this?

  Read the article

• Database problem with MS JET

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  I am migrating a bunch of sites which each use an Access database (or whatever an MDB file is). If I try to load the site, I get the following error: Microsoft OLE DB Provider for SQL Server error '80004005' [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied If I rename the MDB file, I get a complaint that the file does not exist, which makes sense. If the file is named correctly, the site tries to load for about 30 seconds or so, and then just fails with the above message. During this waiting period, I can see a lock file being created (and then at some point removed). The MDB file and it's parent dir have full permissions granted to all users. Given that the lock file is successfully created and removed, I don't think that this is a "real" permission issue. The OS is Windows Server 2003 SP2. I am not sure about much more detail on it's config wrt Access databases. I also don't know what version it is expected to be. VB code in question: set oConn=server.createobject("adodb.connection") DSNtemp="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=D:\fullPathGoesHere\db\sitedb.mdb" oConn.Open DSNtemp

  Read the article

• Windows 7 Not Starting and System Repair Not Loading

  - by Mark

  I have a Dell Inspiron 1545 running Windows 7 When turning on my PC I keep receiving a black screen with the option to use System Repair or Start Normally. Both options lead me to the System Repair background except no matter how long I wait the system restore options never show up. Choosing F8 and running all of the options including safe mode encounters the same result above. I tried to to use 2 system recovery disks 32x and 64x I downloaded and both lead to similiar results. When I choose System Repair running from the disk the System Repair Question asking to select a language pops ups but after this no matter how long I wait no other options appear. Next after restarting and selecting F8 (after hitting f12 and running from CD) I choose 'Run From Safe Mode with Command Prompt' I am able to run all of the options from System Restore with differing results: Startup Repair: Choosing this ends up in system repair indefinitely (left running 12 hrs) System Restore: Does Nothing. PC thinks for a second and then stops. When selecting ShutDown I see an error message stating there are no restore points. System Image Recovery: Service Cannot be started in Safe Mode Windows Memory Diagnostic: Runs test but then leads to system repair background which never loads system repair Command Prompt: chkdsk /r -Cannot Lock Current Drive...write protected. chkdsk /f -Cannot Lock Current Drive...write protected. bootcfg - Cannot open Boot.Ini file bootcfg - Ran all 3 (rebuildBcd, FixMbr and Fixboot) but PC still goes to System Repair background with no repair options popping up upon restart (without recovery CD). I'm on the verge of purchasing a boot utility disk for $50 unless there is anything else short of "take it to a computer shop" that somebody can suggest I try.

  Read the article

• Microsoft Arc Mouse OS X

  - by meepz

  I recently bought a new Mac Book Pro with Mountain Lion 10.8 on it. The only portable mouse I have is my Microsoft Arc Mouse. I wanted to use it with the laptop so I installed the IntelliPoint 8.2 for Mac from Microsofts website. According to their website, this driver is for OS X 10.4-10.7. Now I thought that wouldnt be too much of an issue but unfortunately for me, the driver installs fine and the mouse is detected but I get no movement and when I click the buttons nothing happens. I took the mouse with me on a business trip to EU and before I left I checked if the mouse worked with my desktop which is running Windows 7 and it worked without any hiccups. I'm not too sure where the OS differs from 10.7 to 10.8. I found an article online but it doesn't pertain to my mouse, although it could be of assistance. I have tried my version of their adjustment but I am not too knowledgable on low level hardware/software modifications so I may have done it wrong. heres the link: http://refluxions.wordpress.com/2008/08/18/mac-os-x-mouse-madnessfixed/ I get the following details when I check mouse info in the IntelliPoint preferences pane: The following Microsoft mouse devices are currently connected to your Macintosh driven by the Intellipoint software. Arc Mouse Vendor name: Microsoft Product name: Microsoft AE 2.4GHz Transceiver 5.0 Vendor ID: 045E Product ID: 074F Device version: 0140 if anyone has any suggestions on how to fix this it would be greatly appreciated! I love the mouse and im here in EU for another two weeks. Thanks

  Read the article

• ubuntu not detecting CDdrives

  - by Mirage

  Ihave insatlled ubuntu 10.4 on my compuer with 6 cd drives. Now initiallyi had window server 2008 and i had to install marvel raid sata controller and then my window detected all 6 drives. Now ubuntu is detecting only 3 drives and i have not found marvell drivers for ubuntu bt i have drives for window 2008. Now my question is if i have vrtual machine inside ubuntu using vmware workstation and i install that driver. then can VM dtect thse 6 drives or host has to detect those drives first to make VMs use that Ubuntu shows this thing from terminal *-cdrom:0 description: DVD-RAM writer product: DVDRAM GSA-H10N vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/scd0 logical name: /dev/sr0 version: JL10 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD writer product: DVDRRW GWA-4164B vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@0:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: 1.01 serial: [HL-DT-STDVDRRW GWA-4164B1.0105/05/12 capabilities: removable audio cd-r cd-rw dvd dvd-r configuration: ansiversion=5 status=nodisc Is t detecting all drives or thise local names just same

  Read the article

• Optimize apache for 10K+ wordpress views a day on 2GB RAM E6500 CPU

  - by Broke artist

  I have a dedicated server with apache/php on ubuntu serving my Wordpress blog with about 10K+ pageviews a day. I have W3TC plug in installed with APC. But every now and then server stop responding or goes dead slow and i have to restart apache to get it back. Heres my config what am i doing wrong? ServerRoot "/etc/apache2" LockFile /var/lock/apache2/accept.lock PidFile ${APACHE_PID_FILE} TimeOut 40 KeepAlive on MaxKeepAliveRequests 200 KeepAliveTimeout 2 StartServers 5 MinSpareServers 5 MaxSpareServers 8 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess Order allow,deny Deny from all Satisfy all DefaultType text/plain HostnameLookups Off ErrorLog /var/log/apache2/error.log LogLevel error Include /etc/apache2/mods-enabled/.load Include /etc/apache2/mods-enabled/.conf Include /etc/apache2/httpd.conf Include /etc/apache2/ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %O" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined Include /etc/apache2/conf.d/ Include /etc/apache2/sites-enabled/

  Read the article

• Bind a key to a commandline command in Mac OS X?

  - by Stefan Lasiewski

  I have a Mac Powerbook running Leopard (10.5.8). Does Leopard provide an easy way to bind keys to commands which are typically run on the commandline? For example, I can open up Terminal.app and run the command /System/Library/Frameworks/ScreenSaver.framework/Resources/ScreenSaverEngine.app/Contents/MacOS/ScreenSaverEngine which will activate the screensaver and lock my screen. What if I want to bind 'Apple-key L' to this command and execute this globally, regardless of which application is in use at the moment? Can I do this, or can I only run ScreenSaverEngine from a Terminal window? I tried to set up global keyboard shortcuts, but it seems that this won't allow me to bind a key to an arbitrary shell command: Note: You can create keyboard shortcuts only for existing menu commands. You cannot define keyboard shortcuts for general purpose tasks such as opening an application or switching between applications. I tried to set up a application keyboard shortcut, but commands like ScreenSaverEngine don't seem to be an application. Note that this Screensaver/Lock screen is just one example. I have come across other nifty commands which I might want to bind to a key-combination as well. I can do this in Gnome and Windows (with varying success). How about with Leopard? Should I be looking at doing this with AppleScript? (I haven't used that since the Hypercard days ...)

  Read the article

• Need help with custom init script

  - by churnd

  I'm trying to set up an init script for a process on redhat linux: #!/bin/sh # # Startup script for Conquest # # chkconfig: 345 85 15 - start or stop process definition within the boot process # description: Conquest DICOM Server # processname: conquest # pidfile: /var/run/conquest.pid # Source function library. This creates the operating environment for the process to be started . /etc/rc.d/init.d/functions CONQ_DIR=/usr/local/conquest case "$1" in start) echo -n "Starting Conquest DICOM server: " cd $CONQ_DIR && daemon --user mruser ./dgate -v - Starts only one process of a given name. echo touch /var/lock/subsys/conquest ;; stop) echo -n "Shutting down Conquest DICOM server: " killproc conquest echo rm -f /var/lock/subsys/conquest rm -f /var/run/conquest.pid - Only if process generates this file ;; status) status conquest ;; restart) $0 stop $0 start ;; reload) echo -n "Reloading process-name: " killproc conquest -HUP echo ;; *) echo "Usage: $0 {start|stop|restart|reload|status}" exit 1 esac exit 0 However, the cd $CONQ_DIR is getting ignored, because the script errors out: # ./conquest start Starting Conquest DICOM server: -bash: ./dgate: No such file or directory [FAILED] For some reason, I have to run dgate as ./dgate. I cannot specify the full path /usr/local/conquest/dgate The software came with an init script for a Debian system, so the script uses start-stop-daemon, with the option --chdir to where dgate is, but I haven't found a way to do this with the Redhat daemon function.

  Read the article

• Xmodmap fails to remap modifier keys

  - by ZyX

  When I try to move keys, so that I have CapsLock on escape, Control on CapsLock and Escape on left control, I get the following error: % xmodmap ~/.Xmodmap X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 118 (X_SetModifierMapping) Value in failed request: 0x17 Serial number of failed request: 15 Current serial number in output stream: 15 That is the code that fails: remove Lock = Caps_Lock ! ESC keycode 9 = Caps_Lock add Lock = Caps_Lock remove Control = Control_L ! CapsLock keycode 66 = Control_L add control = Control_L ! Control_R keycode 37 = Escape ! 2*Meta_L keycode 148 = Meta_L add mod1 = Meta_L If I comment out all lines that start with either add or remove it runs without any errors, but does not do what I want. Program versions (Gentoo x86 (stable)): xorg-server-1.7.6 xmodmap-1.0.4 xf86-input-evdev-2.3.2 Xorg.conf: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Evdev Keyboard" "CoreKeyboard" InputDevice "Evdev Mouse" "CorePointer" EndSection Section "Module" Disable "dri" Disable "dri2" Disable "record" EndSection Section "InputDevice" Identifier "Evdev Keyboard" Driver "evdev" Option "Device" "/dev/input/event2" Option "CoreKeyboard" Option "AutoRepeat" "500 25" Option "XkbRules" "xorg" Option "xkb_rules" "xorg" Option "XkbModel" "yahoo" Option "xkb_model" "yahoo" Option "XkbLayout" "dvp2" # ,ru2 Option "xkb_layout" "dvp2" # ,ru2 # Option "XkbVariant" "" # ,winkeys Option "XkbOption" "grp_led:scroll,grp:rctrl_toggle,compose:rwin,grp:lwin_switch" # grp:lwin_switch EndSection Section "InputDevice" Identifier "Evdev Mouse" Driver "evdev" Option "CorePointer" Option "Device" "/dev/input/event3" Option "Name" "Genius Ergo Mouse" Option "HWHEELRelativeAxisButtons" "7 6" Option "WHEELRelativeAxizButtons" "4 5" Option "SendCoreEvents" "true" Option "Buttons" "11" EndSection Section "Files" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/terminus" # FontPath "/usr/share/fonts/intlfonts" FontPath "/usr/share/fonts/ttf-bitstream-vera" # FontPath "/usr/share/fonts/ttf" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/paratype" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Section "ServerFlags" # Option "XkbDisable" "false" # Option "AutoAddDevices" "false" Option "DontVTSwitch" "false" Option "DontZap" "false" # Option "DontZoom" "true" EndSection Everything worked before update.

  Read the article

• Ubuntu VM "read only file system" fix?

  - by David

  I was going to install VMWare tools on an Ubuntu server Virtual Machine, but I ran into the issue of not being able to create a cdrom directory in the /mnt directory. I then tested to see if it was just a permissions issue, but I couldn't even create a folder in the home directory. It continues to state that it is a read only file system. I know a little about Linux, and I'm not comfortable with it yet. Any advice would be much appreciated. Requested Information from a comment: username@servername:~$ mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type tmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) For sure root output. root@server01:~# mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type tmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)

  Read the article

• Linux commands shows different results

  - by ClydeFrog

  I'm really having a hard time to process these results on my Ubuntu server. I have a major problem with my JBoss server where I get FileNotFoundExceptions along with "No space left on device" errors. And I thought "maybe I'm out of disk space", and used df command to figure out how much I have left: root@ubuntu1:/# df -h Filsystem Storlek Anvnt Tillg Anv% Monterat på /dev/mapper/ubuntu1-root 36G 13G 21G 38% / none 2,0G 192K 2,0G 1% /dev none 2,0G 0 2,0G 0% /dev/shm none 2,0G 64K 2,0G 1% /var/run none 2,0G 0 2,0G 0% /var/lock /dev/sda1 228M 23M 193M 11% /boot /dev/mapper/vgdata-lvdata 79G 9,2G 66G 13% /data And as you can see, I have plenty of space left. And I also checked if I'm out of i-nodes: root@ubuntu1:/# df -i Filsystem Inoder IAnv IFria IAnv% Monterat på /dev/mapper/ubuntu1-root 2346512 61992 2284520 3% / none 505380 773 504607 1% /dev none 507383 1 507382 1% /dev/shm none 507383 30 507353 1% /var/run none 507383 2 507381 1% /var/lock /dev/sda1 124496 230 124266 1% /boot /dev/mapper/vgdata-lvdata 10486784 233945 10252839 3% /data But then i used du: root@ubuntu1:/# du -s -h /* 7,5M /bin 23M /boot 19G /data 192K /dev 11G /eniro 5,3M /etc 112K /home 0 /initrd.img 183M /lib 0 /lib64 16K /lost+found 12K /media 4,0K /mnt 4,0K /opt du: kan inte komma åt "/proc/20452/task/20452/fd/3": Filen eller katalogen finns inte du: kan inte komma åt "/proc/20452/task/20452/fdinfo/3": Filen eller katalogen finns inte du: kan inte komma åt "/proc/20452/fd/3": Filen eller katalogen finns inte du: kan inte komma åt "/proc/20452/fdinfo/3": Filen eller katalogen finns inte 0 /proc 18M /root 8,2M /sbin 4,0K /selinux 8,0K /srv 0 /sys 40K /tmp 691M /usr 1,2G /var 0 /vmlinuz Notice that /data and /eniro are 30G combined! How is it possible? Do I have a memory leak somewhere? Or is it something else? ----- EDIT 1 ----- Ok, I figured out that /data has its own mount so it's not possible to combine /data and /eniro because they aren't on the same mount. But how come it says 9,2G on the first command when it says 19G on the third on directory /data?

  Read the article

• NIC are not advertising Correct Speeds

  - by Squidly

  I have an IBM x336 that is not advertising the proper LINK speeds. One interface is the other is not. I've tried to Force it to 1000/Full but then it just shows link down. I have confirmed the switch is set to auto negotiate like my switches. I have also changed out my Ethernet Cables. I'm at a loss where to look further. I have verified that it will connect at 1G on a different swtich. This also has happened on two different servers on the same switch. This is my output from mii-tool -v for each interface. eth0: negotiated 100baseTx-FD, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD eth1: negotiated 1000baseT-FD flow-control, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• open_basedir problems with APC and Symfony2

  - by Stephen Orr

  I'm currently setting up a shared staging environment for one of our applications, written in PHP5.3 and using the Symfony2 framework. If I only host a single instance of the application per server, everything works as it should. However, if I then deploy additional instances of the application (which may or may not share the exact same code, dependent on client customisations), I get errors like this: [Tue Nov 06 10:19:23 2012] [error] [client 127.0.0.1] PHP Warning: require(/var/www/vhosts/application1/httpdocs/vendor/doctrine-common/lib/Doctrine/Common/Annotations/AnnotationRegistry.php): failed to open stream: Operation not permitted in /var/www/vhosts/application2/httpdocs/app/bootstrap.php.cache on line 1193 [Tue Nov 06 10:19:23 2012] [error] [client 127.0.0.1] PHP Fatal error: require(): Failed opening required '/var/www/vhosts/application1/httpdocs/app/../vendor/doctrine-common/lib/Doctrine/Common/Annotations/AnnotationRegistry.php' (include_path='.:/usr/share/pear:/usr/share/php') in /var/www/vhosts/application2/httpdocs/app/bootstrap.php.cache on line 1193 Basically, the second site is trying to require the files from the first site, but due to open_basedir restrictions it can't do that. I'm not willing to disable open_basedir as that is only masking the problem instead of solving it, and creates a dependency between applications that should not be present. I initially believed this was related to a Symfony2 error, but I've now tracked it down to an issue with APC; disabling APC also solves the error, but I'm concerned about the performance impact of doing so. Does anyone have any suggestions on what I might be able to do?

  Read the article

• 403 with Apache and Symfony on Ubuntu 10.04

  - by Dominic Santos

  I'm trying to run symfony on my apache installation (I'm using xampp for the whole package) and it keeps giving me a 403 error every time I try to access my website. I've got vhosts set up with the following: <VirtualHost *:80> ServerName localhost DocumentRoot "/opt/lampp/htdocs" DirectoryIndex index.php <Directory "/opt/lampp/htdocs"> AllowOverride All Allow from All </Directory> </VirtualHost> <VirtualHost *:80> ServerName servername.localhost DocumentRoot /home/me/web/server/web DirectoryIndex index.php Alias /sf "/lib/vendor/symfony/data/bin/web/sf" <Directory "/home/me/web/server/web"> AllowOverride All Allow from All </Directory> </VirtualHost> <Directory "/lib/vendor/symfony/data/bin/web/sf"> Allow from All </Directory> I've also added "127.0.0.1 servername.localhost" in my hosts file. When I try to access "servername.localhost" it just gives me a 403 error. I've chmod'd 777 the symfony directory and my website directory in my home directory and used './symfony project:permissions' to let symfony check that permissions are set up correctly but still not result. If I move my website directory into "/opt/lampp/htdocs" then it will serve it from there but still has problems access the symfony stuff such as the debug toolbar. Any help would be appreciated.

  Read the article

• Windows 7 pc freezes for an indeterminate amount of time after unlocking

  - by pikes

  Not sure if this type of question is appropriate for this forum, but I've tried everything I can think of to solve this problem aside from format/reinstall. I recently got a new work PC (Dell optiplex 755) with windows 7 professional x64. Standard developer software installed for .net development: VS2008, VS2005, SQL management studio, office 2007, etc. Recently I've been having this weird problem where after I lock my pc, when I try to unlock it, the screen will be black for awhile after unlocking. I can ctl+alt+del and put my password in but then it just goes black. The amount of time on the black screen seems to be related to the amount of time I am away from my PC. If only away a few minutes, it'll take about a minute to get to the desktop. If away for an hour, could take up to 15 minutes. If I lock it and go home for the night, I have to restart my PC in the morning (I've let it sit for an hour after a night of being locked and nothing happened). It doesn't do it every time but definitely the majority of the time. One weird thing I've seen is that if I remote into my machine before trying to log back in it does not do it. I uninstalled all software back to the point when I remember it started happening and it still does it. I was using this PC for a few weeks without this problem happening at all. Anyone know what my next troubleshooting steps could be? My IT department tried to fix it by moving my old profile to another disk and having me log in, effectively recreating a profile from scratch but that didn't solve it. As I said above if this isn't the right forum for these types of questions please let me know. Thanks in advance!

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >