Search Results

Search found 2757 results on 111 pages for 'webkit transform'.

Page 70/111 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• WCF NetTcpBinding Buffered vs Streamed performance problems

  - by DxCK

  I wrote a WCF service that should transform any size of files, using the Streamed TransferMode in NetTcpBinding, and System.IO.Stream object. When running performance test, i found significant performance problem. Then I decided to test it with Buffered TransferMode and saw that performance is two times faster! Because my service should transfer big files, i just can't stay in Buffered TransferMode because of memory management overhead on big files at the server and client side together. Why is Streamed TransferMode slower than the Buffered TransferMode? What can i do to make Stremed performance better?

  Read the article

• CAKeyframeAnimation - Examples

  - by Brian

  I have a a menu that is a CALayer that will slide across the screen to a given point. I want the effect where the menu will go a little past the point, then a little before the point, and then land on the point. I can move the menu by applying a transform, but I was hoping to get this bouncing effect to work. I was looking into CAKeyframeAnimation, but I'm having trouble locating an example/tutorial. Any links or help would be great. Thanks.

  Read the article

• Configuring WCF to Handle a Signature on a SOAP Message from an Oracle Server

  - by AlEl

  I'm trying to use WCF to consume a web service provided by a third-party's Oracle Application Server. I pass a username and password and as part of the response the web service returns a standard security tag in the header which includes a digest and signature. With my current setup, I successfully send a request to the server and the web service sends the expected response data back. However, when parsing the response WCF throws a MessageSecurityException, with an InnerException.Message of "Supporting token signatures not expected." My guess is that WCF wants me to configure it to handle the signature and verify it. I have a certificate from the third party that hosts the web service that I should be able to use to verify the signature. It's in the form of -----BEGIN CERTIFICATE----- [certificate garble] -----END CERTIFICATE----- Here's a sample header from a response that makes WCF throw the exception: <?xml version="1.0" encoding="UTF-8"?> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Header> <wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <dsig:Signature xmlns="http://www.w3.org/2000/09/xmldsig#" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"> <dsig:SignedInfo> <dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> <dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/> <dsig:Reference URI="#_51IUwNWRVvPOcz12pZHLNQ22"> <dsig:Transforms> <dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> </dsig:Transforms> <dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/> <dsig:DigestValue> [DigestValue here] </dsig:DigestValue> </dsig:Reference> <dsig:Reference URI="#_dI5j0EqxrVsj0e62J6vd6w22"> <dsig:Transforms> <dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> </dsig:Transforms> <dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/> <dsig:DigestValue> [DigestValue here] </dsig:DigestValue> </dsig:Reference> </dsig:SignedInfo> <dsig:SignatureValue> [Signature Value Here] </dsig:SignatureValue> <dsig:KeyInfo> <wsse:SecurityTokenReference xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:Reference URI="#BST-9nKWbrE4LRv6maqstrGuUQ22" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/> </wsse:SecurityTokenReference> </dsig:KeyInfo> </dsig:Signature> <wsse:BinarySecurityToken ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" wsu:Id="BST-9nKWbrE4LRv6maqstrGuUQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> [Security Token Here] </wsse:BinarySecurityToken> <wsu:Timestamp wsu:Id="_dI5j0EqxrVsj0e62J6vd6w22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <wsu:Created>2010-05-26T18:46:30Z</wsu:Created> </wsu:Timestamp> </wsse:Security> </soap:Header> <soap:Body wsu:Id="_51IUwNWRVvPOcz12pZHLNQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> [Body content here] </soap:Body> </soap:Envelope> My binding configuration looks like: <basicHttpBinding> <binding name="myBinding" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="TransportWithMessageCredential"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> </basicHttpBinding> I'm new at WCF, so I'm sorry if this is a bit of a dumb question. I've been trying to Google solutions, but there seem to be so many different ways to configure WCF that I'm getting overwhelmed. Thanks in advance!

  Read the article

• Noob Objective-C/C++ - Linker Problem/Method Signature Problem

  - by Josh

  There is a static class Pipe, defined in C++ header that I'm including. The static method I'm interested in calling (from Objetive-c) is here: static ERC SendUserGet(const UserId &_idUser,const GUID &_idStyle,const ZoneId &_idZone,const char *_pszMsg); I have access to an objetive-c data structure that appears to store a copy of userID, and zoneID -- it looks like: @interface DataBlock : NSObject { GUID userID; GUID zoneID; } Looked up the GUID def, and its a struct with a bunch of overloaded operators for equality. UserId and ZoneId from the first function signature are #typedef GUID Now when I try to call the method, no matter how I cast it (const UserId), (UserId), etc, I get the following linker error: Ld build/Debug/Seeker.app/Contents/MacOS/Seeker normal i386 cd /Users/josh/Development/project/Mac/Seeker setenv MACOSX_DEPLOYMENT_TARGET 10.5 /Developer/usr/bin/g++-4.2 -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk -L/Users/josh/Development/TS/Mac/Seeker/build/Debug -L/Users/josh/Development/TS/Mac/Seeker/../../../debug -L/Developer/Platforms/iPhoneOS.platform/Developer/usr/lib/gcc/i686-apple-darwin10/4.2.1 -F/Users/josh/Development/TS/Mac/Seeker/build/Debug -filelist /Users/josh/Development/TS/Mac/Seeker/build/Seeker.build/Debug/Seeker.build/Objects-normal/i386/Seeker.LinkFileList -mmacosx-version-min=10.5 -framework Cocoa -framework WebKit -lSAPI -lSPL -o /Users/josh/Development/TS/Mac/Seeker/build/Debug/Seeker.app/Contents/MacOS/Seeker Undefined symbols: "SocPipe::SendUserGet(_GUID const&, _GUID const&, _GUID const&, char const*)", referenced from: -[PeoplePaneController clickGet:] in PeoplePaneController.o ld: symbol(s) not found collect2: ld returned 1 exit status Is this a type/function signature error, or truly some sort of linker error? I have the headers where all these types and static classes are defined #imported -- I tried #include too, just in case, since I'm already stumbling :P Forgive me, I come from a web tech background, so this c-style memory management and immutability stuff is super hazy. Edit: Added full linker error text. Changed "function" to "method" Thanks, Josh

  Read the article

• How to get only one rounded corner with border-radius htc hack and MSIE v:roundrect?

  - by aarreoskari

  I have a problem with partially rounded corners. See the first working example for most browsers: .box { display: block; width: 100px; height: 100px; border: 1px solid black; background-color: yellow; -moz-border-radius-bottomright: 10px; -webkit-border-bottom-right-radius: 10px; } You can see that only bottom right corner should be rounded. Natural choice would be adding a border-radius.htc hack inside a conditional IE statement: .box { border-bottom-right-radius: 20px; behavior:url(border-radius.htc); } This is not working because border-radius.htc file is only accessing normal border-radius value (this.currentStyle['border-radius']). VML used by the hack is roundrect which only supports one percentage value for arcsize. So I was wondering if there is any other way around the problem by using some other VML elements? Another problem is that htc-file doesnt's support borders but that can be fixed with VML's stroked attribute. Nifty corners for example doesn't work well with corners at all.

  Read the article

• How to use Android's CacheManager?

  - by punnie

  I'm currently developing an Android application that fetches images using http requests. It would be quite swell if I could cache those images in order to improve to performance and bandwidth use. I came across the CacheManager class in the Android reference, but I don't really know how to use it, or what it really does. I already scoped through this example, but I need some help understanding it: /core/java/android/webkit/gears/ApacheHttpRequestAndroid.java Also, the reference states: "Network requests are provided to this component and if they can not be resolved by the cache, the HTTP headers are attached, as appropriate, to the request for revalidation of content." I'm not sure what this means or how it would work for me, since CacheManager's getCacheFile accepts only a String URL and a Map containing the headers. Not sure what the attachment mentioned means. An explanation or a simple code example would really do my day. Thanks! Update Here's what I have right now. I am clearly doing it wrong, just don't know where. public static Bitmap getRemoteImage(String imageUrl) { URL aURL = null; URLConnection conn = null; Bitmap bmp = null; CacheResult cache_result = CacheManager.getCacheFile(imageUrl, new HashMap()); if (cache_result == null) { try { aURL = new URL(imageUrl); conn = aURL.openConnection(); conn.connect(); InputStream is = conn.getInputStream(); cache_result = new CacheManager.CacheResult(); copyStream(is, cache_result.getOutputStream()); CacheManager.saveCacheFile(imageUrl, cache_result); } catch (Exception e) { return null; } } bmp = BitmapFactory.decodeStream(cache_result.getInputStream()); return bmp; }

  Read the article

• Nhibernate Criteria Query with Join

  - by John Peters

  I am looking to do the following using an NHibernate Criteria Query I have "Product"s which has 0 to Many "Media"s A product can be associated with 1 to Many ProductCategories These use a table in the middled to create the join ProductCategories Id Title ProductsProductCategories ProductCategoryId ProductId Products Id Title ProductMedias ProductId MediaId Medias Id MediaType I need to implement a criteria query to return All Products in a ProductCategory and the top 1 associated Media or no media if none exists. So although for example a "T Shirt" may have 10 Medias associated, my result should be something similar to this Product.Id Product.Title MediaId 1 T Shirt 21 2 Shoes Null 3 Hat 43 I have tried the following solutions using JoinType.LeftOuterJoin 1) productCriteria.SetResultTransformer(Transformers.DistinctRootEntity); This hasnt worked as the transform is done code side and as I have .SetFirstResult() and .SetMaxResults() for paging purposes it wont work. 2) .SetProjection( Projections.Distinct( Projections.ProjectionList() .Add(Projections.Alias(Projections.Property("Id"), "Id")) ... .SetResultTransformer(Transformers.AliasToBean()); This hasn't worked as I cannot seem to populate a value for Medias.Id in the projections. (Similar to http://stackoverflow.com/questions/1036116/nhibernate-criteria-api-projections) Any help would be greatly appreciated

  Read the article

• Visual State Manager in WPF not working for me

  - by Román

  Hi In a wpf project I have this XAML code <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:ic="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions" x:Class="WpfApplication1.MainWindow" xmlns:vsm="clr-namespace:System.Windows;assembly=WPFToolkit" x:Name="Window" Title="MainWindow" Width="640" Height="480"> <vsm:VisualStateManager.VisualStateGroups> <vsm:VisualStateGroup x:Name="VisualStateGroup"> <vsm:VisualState x:Name="Loading"> <Storyboard> <ObjectAnimationUsingKeyFrames BeginTime="00:00:00" Duration="00:00:00.0010000" Storyboard.TargetName="control" Storyboard.TargetProperty="(UIElement.Visibility)"> <DiscreteObjectKeyFrame KeyTime="00:00:00" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames BeginTime="00:00:00" Duration="00:00:00.0010000" Storyboard.TargetName="button" Storyboard.TargetProperty="(UIElement.Visibility)"> <DiscreteObjectKeyFrame KeyTime="00:00:00" Value="{x:Static Visibility.Collapsed}"/> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames BeginTime="00:00:00" Duration="00:00:00.0010000" Storyboard.TargetName="button1" Storyboard.TargetProperty="(UIElement.Visibility)"> <DiscreteObjectKeyFrame KeyTime="00:00:00" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </vsm:VisualState> <VisualState x:Name="Normal"> <Storyboard> <ObjectAnimationUsingKeyFrames BeginTime="00:00:00" Duration="00:00:00.0010000" Storyboard.TargetName="control" Storyboard.TargetProperty="(UIElement.Visibility)"> <DiscreteObjectKeyFrame KeyTime="00:00:00" Value="{x:Static Visibility.Collapsed}"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> </vsm:VisualStateGroup> </vsm:VisualStateManager.VisualStateGroups> <Grid x:Name="LayoutRoot"> <Grid.Resources> <ControlTemplate x:Key="loadingAnimation"> <Image x:Name="content" Opacity="1"> <Image.Source> <DrawingImage> <DrawingImage.Drawing> <DrawingGroup> <GeometryDrawing Brush="Transparent"> <GeometryDrawing.Geometry> <RectangleGeometry Rect="0,0,1,1"/> </GeometryDrawing.Geometry> </GeometryDrawing> <DrawingGroup> <DrawingGroup.Transform> <RotateTransform x:Name="angle" Angle="0" CenterX="0.5" CenterY="0.5"/> </DrawingGroup.Transform> <GeometryDrawing Geometry="M0.9,0.5 A0.4,0.4,90,1,1,0.5,0.1"> <GeometryDrawing.Pen> <Pen Brush="Green" Thickness="0.1"/> </GeometryDrawing.Pen> </GeometryDrawing> <GeometryDrawing Brush="Green" Geometry="M0.5,0 L0.7,0.1 L0.5,0.2"/> </DrawingGroup> </DrawingGroup> </DrawingImage.Drawing> </DrawingImage> </Image.Source> </Image> <ControlTemplate.Triggers> <Trigger Property="Visibility" Value="Visible"> <Trigger.EnterActions> <BeginStoryboard x:Name="animation"> <Storyboard> <DoubleAnimation From="0" To="359" Duration="0:0:1.5" RepeatBehavior="Forever" Storyboard.TargetName="angle" Storyboard.TargetProperty="Angle"/> </Storyboard> </BeginStoryboard> </Trigger.EnterActions> <Trigger.ExitActions> <StopStoryboard BeginStoryboardName="animation"/> </Trigger.ExitActions> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Grid.Resources> <Grid.ColumnDefinitions> <ColumnDefinition MinWidth="76.128" Width="Auto"/> <ColumnDefinition MinWidth="547.872" Width="Auto"/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="0.05*"/> <RowDefinition Height="0.95*"/> </Grid.RowDefinitions> <Button x:Name="button" Margin="0,0,1,0.04" Width="100" Content="Load" d:LayoutOverrides="Height" Click="Button_Click"/> <Button x:Name="button1" HorizontalAlignment="Left" Margin="0,0,0,0.04" Width="100" Content="Stop" Grid.Column="1" d:LayoutOverrides="Height" Click="Button2_Click" Visibility="Collapsed"/> <Control x:Name="control" Margin="10" Height="100" Grid.Row="1" Grid.ColumnSpan="2" Width="100" Template="{DynamicResource loadingAnimation}" Visibility="Collapsed"/> </Grid> </Window> and the following code behind on the window public partial class MainWindow : Window { public MainWindow() { this.InitializeComponent(); } private void Button1_Click(object sender, System.Windows.RoutedEventArgs e) { VisualStateManager.GoToState(this, "Loading", true); } private void Button2_Click(object sender, System.Windows.RoutedEventArgs e) { VisualStateManager.GoToState(this, "Normal", true); } } However, when I click the first button (button1) the state change is not being triggered. What am I doing wrong? Thanks in advance

  Read the article

• Copying the bitmap contents of a UIView's context to that of another UIView

  - by Joonas Trussmann

  Basically what I want to do is copy the already rendered content (a PDF drawn into the UIView's graphics context using CGContextDrawPDFPage()) onto a similar UIView, without having to re render the PDF. The idea is, that I'd then be able to perform an animated transform on the UIView and later re render the PDF with more accuracy. For both UIViews I'm using a larger-than-screen CATiledLayer to make it easier to rerender the PDF once the user zooms in, if that makes any difference. Any tips? I'm kind of lost here.

  Read the article

• Visual Studio 2010 web.config transformations (TransformWebConfig target)

  - by Jeff D

  I am trying to write unit tests for my transformations, so I am running: msbuild migrated-project.csproj /p:Configuration=Release /T:TransformWebConfig. This works for a new project I create in VS2010, but doesn't in this project. I'm assuming it's because it was originally a 2008 project. I know this is supposed to run in a webplatformbuild whatever, but what I'm trying to do, is just run the transform, so I can grab the transformed web.config, and run some unit tests to make sure the right values exist. I don't see TransformWebConfig referenced as a target in either project, so I'm not sure what I'm looking for.

  Read the article

• Overlay WriteableBitmap with color

  - by rajenk

  I'm trying to overlay a WriteableBitmap with a certain color in Silverlight. I have a black and white base image, which I'm using to create smaller WriteableBitmap images for a new composite image and I want to overlay either the black or white part of the source image cut-out with a certain color before adding it to the composite image. What I'm doing now is: var cutOut = new WriteableBitmap(8, 14); /* cut out the image here */ cutOut.Render(sourceImage, transform); // sourceImage is the base image cutOutImage.Source = cutOut; // cutOutImage is an Image element in XAML compositeImage.Render(cutOutImage, transform2); // compositeImage is the final WriteableBitmap that is shown on screen I tried the methods on http://blogs.silverarcade.com/silverlight-games-101/15/silverlight-blitting-and-blending-with-silverlights-writeablebitmap/ and using the extension methods from hxxp://writeablebitmapex.codeplex.com/, but I cannot seem to get a color overlay on the cutOut image before rendering it to the compositeImage. Does anyone know of a good method to do this? Thanks in advance.

  Read the article

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Horizontal UITableView

  - by imran

  I want implement a layout in my ipad application that has a uitable view that scrolls left and right rather then up and down : So rather than row 1 row 2 row 3 ( scrolling vertically ) It would be : row 1, row2, row 3 (scrolling horizontally ) I've seen that UItableView is designed to only do vertical scrolling so doing a transform does not give the desired effect. Is there a standard way to do this taking advantage of a datasource provider like uitableview provides? I basically want to do somthing similar to what the BBC News reader app ( http://itunes.apple.com/us/app/bbc-news/id364147881?mt=8 ) on the Ipad does with the list of stories to select from. Thanks

  Read the article

• Configuring a WCF Client to Use UserName Credentials On the Request and Check Certificate Credential

  - by AlEl

  I'm trying to use WCF to consume a web service provided by a third-party's Oracle Application Server. I pass a username and password in a UsernameToken as part of the request and as part of the response the web service returns a standard security tag in the header which includes a digest and signature. With my current setup, I successfully send a request to the server and the web service sends the expected response data back. However, when parsing the response WCF throws a MessageSecurityException, with an InnerException.Message of "Supporting token signatures not expected." My guess is that WCF wants me to configure it to handle the signature and verify it. I have a certificate from the third party that hosts the web service that I should be able to use to verify the signature, although I'm not sure if I'll need it. Here's a sample header from a response that makes WCF throw the exception: <?xml version="1.0" encoding="UTF-8"?> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Header> <wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <dsig:Signature xmlns="http://www.w3.org/2000/09/xmldsig#" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"> <dsig:SignedInfo> <dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> <dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/> <dsig:Reference URI="#_51IUwNWRVvPOcz12pZHLNQ22"> <dsig:Transforms> <dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> </dsig:Transforms> <dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/> <dsig:DigestValue> [DigestValue here] </dsig:DigestValue> </dsig:Reference> <dsig:Reference URI="#_dI5j0EqxrVsj0e62J6vd6w22"> <dsig:Transforms> <dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> </dsig:Transforms> <dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/> <dsig:DigestValue> [DigestValue here] </dsig:DigestValue> </dsig:Reference> </dsig:SignedInfo> <dsig:SignatureValue> [Signature Value Here] </dsig:SignatureValue> <dsig:KeyInfo> <wsse:SecurityTokenReference xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:Reference URI="#BST-9nKWbrE4LRv6maqstrGuUQ22" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/> </wsse:SecurityTokenReference> </dsig:KeyInfo> </dsig:Signature> <wsse:BinarySecurityToken ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" wsu:Id="BST-9nKWbrE4LRv6maqstrGuUQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> [Security Token Here] </wsse:BinarySecurityToken> <wsu:Timestamp wsu:Id="_dI5j0EqxrVsj0e62J6vd6w22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <wsu:Created>2010-05-26T18:46:30Z</wsu:Created> </wsu:Timestamp> </wsse:Security> </soap:Header> <soap:Body wsu:Id="_51IUwNWRVvPOcz12pZHLNQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> [Body content here] </soap:Body> </soap:Envelope> My binding configuration looks like: <basicHttpBinding> <binding name="myBinding" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="TransportWithMessageCredential"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> </basicHttpBinding> I think that basically what I have to do is configure WCF to use UserName client credentials in the request and Certificate client credentials in the response. I don't know how to do this though. I'm new at WCF, so I'm sorry if this is a bit of a dumb question. I've been trying to Google solutions, but there seem to be so many different ways to configure WCF that I'm getting overwhelmed. Thanks in advance!

  Read the article

• ETL Tools and Build Tools

  - by Ngu Soon Hui

  I have familiarities with software automated build tools ( such as Automated Build Studio). Now I am looking at ETL tools. The one thing crosses my mind is that, I can do anything I can do in ETL tools by using a software build tool. ETL tools are tailored for data loading and manipulation for which a lot of scripts are needed in order to do the job. Software build tool, on the other hand, is versatile enough to do any jobs, including writing scripts to extract, transform and load any data from any format into any format. Am I right?

  Read the article

• Rotating a UIButton with a custom image (animation)

  - by Tiago

  Hi, I'm trying to rotate a button that I've connected to the controller from the Interface Builder. I've set it's image right from Interface Builder. I'm using this code on the method that runs when I click it: [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:2.0]; [UIView setAnimationRepeatCount:5]; updateButton.transform = CGAffineTransformMakeRotation( M_PI ); [UIView commitAnimations]; But this doesn't do anything. Can this be done, or should I create the button programmatically in order to get it to rotate?

  Read the article

• Any software transforming broken lines into curves?

  - by brilliant

  Hello, do you know of any software that would help me transform a broken line into a curved line? For example, I have an octagon or a heptagon and I want it to be transformed into something resembling a circle. if you know such software, please, let me know. Thank You! Update A: Here is an image from the tutorial given to me by Jamie Keeling (right now it's the first answer below). At least the picture there represents what I want. In that tutorial this process is called "flattening paths". I will try to put that image right here, but if it doesn't get displayed, you can find it here: http://msdn.microsoft.com/en-us/library/ms536364%28v=VS.85%29.aspx The red line in the picture is what I would want to submit, and the blue line is what I would want to get in the end:

  Read the article

• How to catch an expected (and intended) 302 response code with generic XmlHttpRequest?

  - by Anthony

  So, if you look back at my previous question about Exchange Autodiscover, you'll see that the easiet way to get the autodiscover URL is to send a non-secure, non-authenticated GET request to the server, ala: http://autodiscover.exchangeserver.org/autodiscover/autodiscover.xml The server will respond with a 302 redirect with the correct url in the Location header. I'm trying out something really simple at first with a Chrome extension, where I have: if (req.readyState==4 && req.status==302) { return req.getResponseHeader("Location"); } With another ajax call set up with the full XML Post and the user credentials, But instead Chrome hangs at this point, and a look at the developer panel shows that it is not returning back the response but instead is acting like no response was given, meanwhile showing a Uncaught Error: NETWORK_ERR: XMLHttpRequest Exception 101 in the error log. The way I see it, refering to the exact response status is about the same as "catching" it, but I'm not sure if the problem is with Chrome/WebKit or if this is how XHR requests always handle redirects. I'm not sure how to catch this so that I can get still get the headers from the response. Or would it be possible to set up a secondary XHR such that when it gets the 302, it sends a totally different request? Quick Update I just changed it so that it doesn't check the response code: if (req.readyState==4) { return req.getResponseHeader("Location"); } and instead when I alert out the value it's null. and there is still the same error and no response in the dev console. SO it seems like it either doesn't track 302 responses as responses, or something happens after that wipes that response out?

  Read the article

• Flex HTMLLoader component not raising mouseDown events for all mouse clicks

  - by shane

  I have built a Air 2/Flex 4 kiosk application with Flash Builder 4. Currently I am implementing a touch screen browser to enable users to navigate company training videos. In an attempt to improve the usability of the website on the touchscreen I have placed the HTML component in an adaption of Doug McCune's DragScrollingCanvas (updated to use the flex 4 'Scroller' component) to allow users to scroll the webpage by dragging their finger across the screen. The mouseDown event is used to start scrolling the viewport. In addition the webpage was modified to disable text selection with the following css: html { -webkit-user-select: none; cursor: default; } The problem I face is that the HTMLLoader component only fires a mouseDown if a link/input/button on the webpage is clicked, not when the background or any text is clicked. In addition if I remove the custom css the mouseDown event will not fire when text is being selected, but will if previously highlighted text is clicked. As an alternative I also tried adding a group container with the same dimensions as the HTMLLoader to detect the mouseDown events (so that the group container and HTMLLoader have the same Dragable parent container) and was able to capture mouseDown events and scroll the viewport as expected. However as the mouse event is handled by the group container, I am now unable to navigate the webpage. Does anybody know why the HTMLLoader component is not raising mouseDown events for all mouse clicks?

  Read the article

• Create your own custom browser

  - by ShoX

  Hi, I want to shape my own browser or at least modify a existing one so far that it meets my needs. I want a fast browser (starting and running, not necessarily faster rendering) without any stuff I don't use and simple productive navigation (like Firefox + Vimperator + Tree Style Tab), only much more integrated into each other and a different GUI. I was thinking about just looking into the current two top browsers chrome and firefox (open-source wise) and branch my own smaller version out of it. By just using WebKit or Gecko I will have to implement all the Connection-stuff, too, but I really am not interested in doing that. So my questions are: Does it make sense to start off with a current browser and strip off certain features and the frontend and replace it with my own code? Chrome or Firefox? Which one is less complex? I don't care much about Plugins and Extensions, so they aren't they pretty much even in features otherwise? Thanks for your answers p.s.: It's a just-for-fun at-home project, so please no "just use the browsers..."-stuff...

  Read the article

• Extracting ""((Adj|Noun)+|((Adj|Noun)(Noun-Prep)?)(Adj|Noun))Noun"" from Text (Justeson & Katz, 1995)

  - by ssuhan

  I would like to query if it is possible to extract ((Adj|Noun)+|((Adj|Noun)(Noun-Prep)?)(Adj|Noun))Noun proposed by Justeson and Katz (1995) in R package openNLP? That is, I would like to use this linguistic filtering to extract candidate noun phrases. I cannot well understand its meaning. Could you do me a favor to explain it or transform such representation into R language. Many thanks. Maybe we can start the sample code from: library("openNLP") acq <- "This paper describes a novel optical thread plug gauge (OTPG) for internal thread inspection using machine vision. The OTPG is composed of a rigid industrial endoscope, a charge-coupled device camera, and a two degree-of-freedom motion control unit. A sequence of partial wall images of an internal thread are retrieved and reconstructed into a 2D unwrapped image. Then, a digital image processing and classification procedure is used to normalize, segment, and determine the quality of the internal thread." acqTag <- tagPOS(acq) acqTagSplit = strsplit(acqTag," ")

  Read the article

• How to add custom SOAP header in Spring WS using Axiom and XmlBeans

  - by java_pill

  I'm using Spring WS 1.5.8, XmlBeans for marshalling/unmarshalling and AxiomSoapMessageFactory. My app. needs a custom SOAP header. The data that needs to be in the SOAP Header is a XmlBean (i.e sessionContext in the code below). How can I construct the SOAP Header with this XmlBeans XmlObject element in it? I've mentioned the code of my WebServiceMessageCallback that I'm using and executing this code results in "'Content is not allowed in prolog.' error. Thanks, public void doWithMessage(WebServiceMessage message) throws IOException, TransformerException { SoapMessage soapMessage = (SoapMessage) message; SoapHeader header = soapMessage.getSoapHeader(); StringSource headerSource = new StringSource(XmlBeanUtils.getValue(sessionContext) ); transform(headerSource, header.getResult()); }

  Read the article

• VB FFT - stuck understanding relationship of results to frequency

  - by WaveyDavey

  Trying to understand an fft (Fast Fourier Transform) routine I'm using (stealing)(recycling) Input is an array of 512 data points which are a sample waveform. Test data is generated into this array. fft transforms this array into frequency domain. Trying to understand relationship between freq, period, sample rate and position in fft array. I'll illustrate with examples: ======================================== Sample rate is 1000 samples/s. Generate a set of samples at 10Hz. Input array has peak values at arr(28), arr(128), arr(228) ... period = 100 sample points peak value in fft array is at index 6 (excluding a huge value at 0) ======================================== Sample rate is 8000 samples/s Generate set of samples at 440Hz Input array peak values include arr(7), arr(25), arr(43), arr(61) ... period = 18 sample points peak value in fft array is at index 29 (excluding a huge value at 0) ======================================== How do I relate the index of the peak in the fft array to frequency ?

  Read the article

• What is the simplest way to implement multithredding in c# to existing code

  - by Kaeso

  I have already implemented a functionnal application that parses 26 pages of html all at once to produce an xml file with data contained on the web pages. I would need to implement a thread so that this method can work in the background without causing my app to seems unresponsive. Secondly, I have another function that is decoupled from the first one which compares two xml files to produce a third one and then transform this third xml file to produce an html page using XSLT. This would have to be on a thread, where I can click Cancel to stop the thread whithout crashing the app. What is the easiest best way to do this using WPF forms in VS 2010 ? Note: I cannot use the BackgroundWorker component as it is grayed out in the toolbox.

  Read the article

• MathML or OMML to PNG w/ .NET?

  - by charliedigital

  Are there any libraries which take MathML (or, even more preferably, OMML) and outputs a .PNG file? I am putting together an export process for .docx files and, as a part of this process, I'd like to extract equations and render them as .PNG files. Word 2007 does this natively when you save a document for the web, but so far, I have not been able to find a way to do this programmatically (if anyone has an answer for that, it would be even better). So the next best thing is to take the OMML and use the Microsoft provided XSL stylesheets and transform them to MathML. Unfortunately, I haven't been able to find any (working) rendering libraries for either MathML or OMML. If there aren't any pure .NET libraries for this, I'll settle for just about anything that I can call from a commandline to output a .PNG from either MathML or OMML.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >