Search Results

Search found 5881 results on 236 pages for 'xor power'.

Page 70/236 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Bumblebee [ERROR]Cannot access secondary GPU - error: [XORG]

  - by Lunchbox

  Though this may seem like a duplicate question, none of the suggestions I've seen have worked for me, however nearly all posters get good results. I'll start with hardware: Metabox W350ST notebook Intel Core i7 4700 16GB RAM GTX 765M (with Optimus) 128GB SSD 1TB SSHD My initial error output when trying to optirun a game is: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [133.973920] [ERROR]Aborting because fallback start is disabled. If anything else is needed to troubleshoot this just let me know. Adding bumblebee.conf: # Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau DRIVER VERSION - Output of jockey-text -l: nvidia_304_updates - nvidia_304_updates (Proprietary, Enabled, Not in use)

  Read the article

• Adobe AIR non-Administrator application installation/upgrade on Windows

  - by bzlm

  Is there any way to allow non-Administrator users to install, upgrade or uninstall an Adobe AIR application on Windows? I've made an Adobe AIR application and packaged it as a .air package using the standard AIR mechanism for creating deployment packages. If a normal or Power user tries to install this AIR application, the Application Event Log shows an error saying administrative rights are required. And even if the user elevates during installation, administrative rights are still required for an upgrade using the automated AIR upgrade system (since an upgrade is essentially, behind the scenes, an uninstallation of a .msi package followed by an installation of another .msi package). Is there any way around this? What I've tried so far is: Using the Group Policy editor, setting Windows Installer to elevate during installations. Doesn't work, since AIR attempts a "for all users" installation. Specifying My Documents as the installation directory. Doesn't work, since AIR attempts a "for all users" installation. Giving the user Modify access to the Program Files folder where the application would usually reside. Doesn't work, since this isn't a file permissions issue. Making the user a Power User. Doesn't work, since AIR attempts a "for all users" installation. I'm guessing that both installing and upgrading would work fine for a user if the AIR installer would attempt to make an "only for me" application installation instead of a "for all users" installation, and the user was a Power User, and possibly the application was installed to My Documents I'm also guessing that this problem doesn't exist on OSX and Linux, since they have more intuitive concepts for per-user application installations.

  Read the article

• LaTeX printing only first two pages of a document

  - by Peter Flom

  I am working in LaTeX, and when I create a pdf file (using LaTeX button or pdfLaTeX button or using yap) the pdf has only the first two pages. No errors. It just stops. If I make the first page longer by adding text, it still stops at end of 2nd page. Any ideas? OK, responding to first comment, here is the code \documentclass{article} \title{Outline of Book} \author{Peter L. Flom} \begin{document} \maketitle \section*{Preface} \subsection*{Audience} \subsection*{What makes this book different?} \subsection*{Necessary background} \subsection*{How to read this book} \section{Introduction} \subsection{The purpose of logistic regression} \subsection{The need for logistic regression} \subsection{Types of logistic regression} \section{General issues in logistic regression} \subsection{Transforming independent and dependent variables} \subsection{Interactions} \subsection{Model selection} \subsection{Parameter estimates, confidence intervals, p values} \subsection{Summary and further reading} \section{Dichotomous logistic regression} \subsection{Introduction, theory, examples} \subsection{Exploratory plots and analysis} \subsection{Basic model fitting} \subsection{Advanced and special issues in model fitting} \subsection{Diagnostic and descriptive plots and analysis} \subsection{Traps and gotchas} \subsection{Power analysis} \subsection{Summary and further reading} \subsection{Exercises} \section{Ordinal logistic regression} \subsection{Introduction, theory, examples} \subsubsection{Introduction - what are ordinal variables?} \subsubsection{Theory of the model} \subsubsection{Examples for this chapter} \subsection{Exploratory plots and analysis} \subsection{Basic model fitting} \subsection{Advanced and special issues in model fitting} \subsection{Diagnostic and descriptive plots and analysis} \subsection{Traps and gotchas} \subsection{Power analysis} \subsection{Summary and further reading} \subsection{Exercises} \section{Multinomial logistic regression} \subsection{Introduction, theory, examples} \subsection{Exploratory plots and analysis} \subsection{Basic model fitting} \subsection{Advanced and special issues in model fitting} \subsection{Diagnostic and descriptive plots and analysis} \subsection{Traps and gotchas} \subsection{Power analysis} \subsection{Summary and further reading} \subsection{Exercises} \section{Choosing a model} \subsection{NOIR and its problems} \subsection{Linear vs. ordinal} \subsection{Ordinal vs. multinomial} \subsection{Summary and further reading} \subsection{Exercises} \section{Extensions and related models} \subsection{Other logistic models} \subsection{Multilevel models - PROC NLMIXED and GLIMMIX} \subsection{Loglinear models - PROC CATMOD} \section{Summary} \end{document} thanks Peter

  Read the article

• How to compare two variables from a java class in jess and execute a rule?

  - by user3417084

  I'm beginner in Jess. I'm trying to compare two variables from a Java class in Jess and trying to execute a rule. I have imported cTNumber and measuredCurrent (both are integer)form a java class called CurrentSignal. Similarly imported vTNumberand measuredVoltage form a java class DERSignal. Now I want to make a rule such that if cTNumber is equal to vTNumber then multiply measuredCurrent and measuredVoltage (Both are double) for calculating power. I'm trying in this way.... (import signals.*) (deftemplate CurrentSignal (declare (from-class CurrentSignal))) (deftemplate DERSignal (declare (from-class DERSignal))) (defglobal ?*CTnumber* = 0) (defglobal ?*VTnumber* = 0) (defglobal ?*VTnumberDER* = 0) (defglobal ?*measuredCurrent* = 0) (defglobal ?*measuredVoltage* = 0) (defglobal ?*measuredVoltageDER* = 0) (defrule Get-CT-Number (CurrentSignal (cTNumber ?m)) (CurrentSignal (measuredCurrent ?c)) => (bind ?*measuredCurrent* ?c) (printout t "Measured Current : " ?*measuredCurrent*" Amps"crlf) (bind ?*CTnumber* ?m) (printout t ?*CTnumber* crlf) ) (defrule Get-DER-Number (DERSignal (vTNumber ?o)) (DERSignal (measuredVoltage ?V)) => (bind ?*measuredVoltageDER* ?V) (printout t "Measured Voltage : " ?*measuredVoltageDER* " V" crlf) (bind ?*VTnumberDER* ?o) (printout t ?*VTnumberDER* crlf) ) (defrule Power-Calculation-DER-signal "Power calculation of DER Bay" (test (= ?*CTnumber* ?*VTnumberDER* )) => (printout t "Total Generation : " (* ?*measuredCurrent* ?*measuredVoltageDER*) crlf) ) But the Total Generation is showing 0. But I tried calculating in Java and it's showing a number. Can anyone please help me to solve this problem. Thank you.

  Read the article

• MySQL 1064 error, works in command line and phpMyAdmin; not in app

  - by hundleyj

  Here is my query: select * from (select *, 3956 * 2 * ASIN(SQRT(POWER(SIN(RADIANS(45.5200077 - lat)/ 2), 2) + COS(RADIANS(45.5200077)) * COS(RADIANS(lat)) * POWER(SIN(RADIANS(-122.6942014 - lng)/2),2))) AS distance from stops order by distance, route asc) as p group by route, dir order by distance asc limit 10 This works fine at the command line and in PHPMyAdmin. I'm using Dbslayer to connect to MySQL via my JavaScript backend, and the request is returning a 1064 error. Here is the encoded DBSlayer request string: http://localhost:9090/db?{%22SQL%22:%22select%20*%20from%20%28select%20*,%203956%20*%202%20*%20ASIN%28SQRT%28POWER%28SIN%28RADIANS%2845.5200077%20-%20lat%29/%202%29,%202%29%20+%20COS%28RADIANS%2845.5200077%29%29%20*%20COS%28RADIANS%28lat%29%29%20*%20POWER%28SIN%28RADIANS%28-122.6942014%20-%20lng%29/2%29,2%29%29%29%20AS%20distance%20from%20%60stops%60%20order%20by%20%60distance%60,%20%60route%60%20asc%29%20as%20p%20group%20by%20%60route%60,%20%60dir%60%20order%20by%20%60distance%60%20asc%20limit%2010%22} And the response: {"MYSQL_ERRNO" : 1064 , "MYSQL_ERROR" : "You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '(RADIANS(45.5200077)) * COS(RADIANS(lat)) * POWER(SIN(RADIANS(-122.6942014 - lng' at line 1" , "SERVER" : "trimet"} Thanks!

  Read the article

• Is there any benefit to my rather quirky character sizing convention?

  - by Paul Alan Taylor

  I love things that are a power of 2. I celebrated my 32nd birthday knowing it was the last time in 32 years I'd be able to claim that my age was a power of 2. I'm obsessed. It's like being some Z-list Batman villain, except without the colourful adventures and a face full of batarangs. I ensure that all my enum values are powers of 2, if only for future bitwise operations, and I'm reasonably assured that there is some purpose (even if latent) for doing it. Where I'm less sure, is in how I define the lengths of database fields. Again, I can't help it. Everything ends up being a power of 2. CREATE TABLE Person ( PersonID int IDENTITY PRIMARY KEY ,Firstname varchar(64) ,Surname varchar(128) ) Can any SQL super-boffins who know about the internals of how stuff is stored and retrieved tell me whether there is any benefit to my inexplicable obsession? Is it more efficient to size character fields this way? Can anyone pop in with an "actually, what you're doing works because ....."? I suspect I'm just getting crazier in my older age, but it'd be nice to know that there is some method to my madness.

  Read the article

• Programming powering off and powering on in one single OnClick function on android

  - by user1060919

  I would like to write an activity that after clicking on a button turns off the screen and then turns it back on after 2 secs. I tried using the following code in order to power off the screen: WindowManager.LayoutParams lp = getWindow().getAttributes(); lp.screenBrightness = 0/(float)255; getWindow().setAttributes(lp); But it would only take effect when then onClick function returns. I tried running it into a handler but with no success. I need to find a way to force the setting to get applied before the function returns so that I can call the power on function 2 secs later on the same onClick call. I also found it very hard to wakeup the device afterwards. While this code works if I power off the screen using the physical button it doesn't seem to work when the phone is powered off using the technique described previously. PowerManager pm = (PowerManager)this.getSystemService(Context.POWER_SERVICE); PowerManager.WakeLock wl = pm.newWakeLock(PowerManager.FULL_WAKE_LOCK|PowerManager.ACQUIRE_CAUSES_WAKEUP | PowerManager.ON_AFTER_RELEASE ,"Dev Tag"); try { wl.acquire(); wl.release(); } catch (Exception e) { Toast.makeText(this, e.getMessage(),20).show(); } Thanks you in advance for your help!

  Read the article

• How to diagnose frequent segfaults

  - by Andreas Gohr

  My server is logging frequent segmentation faults to /var/log/kern.log in different tools. So far I've seen them in Perl, PHP and rsync. All installed software is up-to-date Debian packages. Here's an exerpt from the log file: Mar 2 01:07:54 gaz kernel: [ 5316.246303] imapsync[4533]: segfault at 8b ip 00007fb448c98fe6 sp 00007ffff571dd68 error 4 in libperl.so.5.10.1[7fb448bd7000+164000] Mar 2 01:17:42 gaz kernel: [ 5904.354307] php5-cgi[4441]: segfault at 2bb3dc8 ip 0000000002bb3dc8 sp 00007fffbeeaae48 error 15 Mar 2 02:54:05 gaz kernel: [11687.922316] php5-cgi[4495]: segfault at 2d7acf9 ip 0000000002d7acf9 sp 00007fff60c6eb18 error 15 Mar 2 10:50:08 gaz kernel: [40250.390322] BUG: unable to handle kernel paging request at 00000000024b03f0 Mar 2 10:50:08 gaz kernel: [40250.390341] IP: [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390353] PGD 208c71067 PUD 21c811067 PMD 209329067 PTE 8000000211c88067 Mar 2 10:50:08 gaz kernel: [40250.390365] Oops: 0011 [#1] SMP Mar 2 10:50:08 gaz kernel: [40250.390373] last sysfs file: /sys/devices/pci0000:00/0000:00:12.0/host4/target4:0:0/4:0:0:0/block/sdb/stat Mar 2 10:50:08 gaz kernel: [40250.390386] CPU 1 Mar 2 10:50:08 gaz kernel: [40250.390392] Modules linked in: cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative xt_recent xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ ipv4 ip6table_filter ip6_tables xt_DSCP xt_TCPMSS ipt_LOG ipt_REJECT iptable_mangle iptable_filter xt_multiport xt_state xt_limit xt_conntrack nf_conntrack_ftp nf_conntrack ip_tables x_tables loop snd _hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm radeon snd_timer ttm snd drm_kms_helper soundcore drm snd_page_alloc i2c_algo_bit shpchp i2c_piix4 edac_core pcspkr k8temp evdev edac_m ce_amd pci_hotplug i2c_core button ext3 jbd mbcache dm_mod powernow_k8 aacraid 3w_9xxx 3w_xxxx raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 md_mod sata_nv sata_sil sata_via sd_mod crc_t10dif ata_generic ahci pata_atiixp ohci_hcd libata r8169 mii thermal ehci_hcd processor thermal_sys scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] Mar 2 10:50:08 gaz kernel: [40250.390566] Pid: 11482, comm: munin-limits Not tainted 2.6.32-5-amd64 #1 MS-7368 Mar 2 10:50:08 gaz kernel: [40250.390576] RIP: 0010:[<00000000024b03f0>] [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390586] RSP: 0018:ffff88021cc8dec0 EFLAGS: 00010286 Mar 2 10:50:08 gaz kernel: [40250.390593] RAX: 000000001ddc1000 RBX: 0000000000000010 RCX: ffffffff810f9904 Mar 2 10:50:08 gaz kernel: [40250.390600] RDX: 0000000000000000 RSI: ffffea0007688200 RDI: 0000000000000286 Mar 2 10:50:08 gaz kernel: [40250.390608] RBP: 00000000ffffffea R08: 0000000000000025 R09: 7865542f30312e35 Mar 2 10:50:08 gaz kernel: [40250.390615] R10: 000000d01cc8ddf8 R11: 0000000000000246 R12: ffff88021cc8def8 Mar 2 10:50:08 gaz kernel: [40250.390622] R13: 0000000002295010 R14: 00000000022c9db0 R15: 0000000002488d78 Mar 2 10:50:08 gaz kernel: [40250.390630] FS: 00007f3b3c8b2700(0000) GS:ffff880008d00000(0000) knlGS:0000000000000000 Mar 2 10:50:08 gaz kernel: [40250.390641] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 2 10:50:08 gaz kernel: [40250.390648] CR2: 00000000024b03f0 CR3: 000000021c5d1000 CR4: 00000000000006e0 Mar 2 10:50:08 gaz kernel: [40250.390656] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 2 10:50:08 gaz kernel: [40250.390663] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 2 10:50:08 gaz kernel: [40250.390671] Process munin-limits (pid: 11482, threadinfo ffff88021cc8c000, task ffff88021bf59530) Mar 2 10:50:08 gaz kernel: [40250.390681] Stack: Mar 2 10:50:08 gaz kernel: [40250.390687] ffffffff810f1d4a ffff880208c63228 0000000000000000 00007fffc2dcecc0 Mar 2 10:50:08 gaz kernel: [40250.390697] <0> 00000000024ba2b0 0000000002295010 ffffffff810f1e3d 0000000000000004 Mar 2 10:50:08 gaz kernel: [40250.390712] <0> ffff88021bf59530 ffff88021c4edc00 ffffffff812fe0b6 ffff88021c4edc60 Mar 2 10:50:08 gaz kernel: [40250.390732] Call Trace: Mar 2 10:50:08 gaz kernel: [40250.390742] [<ffffffff810f1d4a>] ? vfs_fstatat+0x2c/0x57 Mar 2 10:50:08 gaz kernel: [40250.390750] [<ffffffff810f1e3d>] ? sys_newstat+0x11/0x30 Mar 2 10:50:08 gaz kernel: [40250.390760] [<ffffffff812fe0b6>] ? do_page_fault+0x2e0/0x2fc Mar 2 10:50:08 gaz kernel: [40250.390768] [<ffffffff812fbf55>] ? page_fault+0x25/0x30 Mar 2 10:50:08 gaz kernel: [40250.390777] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b Mar 2 10:50:08 gaz kernel: [40250.390783] Code: Bad RIP value. Mar 2 10:50:08 gaz kernel: [40250.390791] RIP [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390799] RSP <ffff88021cc8dec0> Mar 2 10:50:08 gaz kernel: [40250.390805] CR2: 00000000024b03f0 Mar 2 10:50:08 gaz kernel: [40250.391051] ---[ end trace 1cc1473b539c7f6e ]--- Mar 2 11:42:20 gaz kernel: [43382.242301] php5-cgi[10963]: segfault at d81160 ip 0000000000d81160 sp 00007fff3adcb058 error 15 Mar 2 21:51:14 gaz kernel: [79916.418302] php5-cgi[20089]: segfault at 1c59dc8 ip 0000000001c59dc8 sp 00007fff9b877fb8 error 15 Mar 3 03:45:01 gaz kernel: [101143.334305] munin-update[22519] general protection ip:7f516dce204c sp:7fff6049a978 error:0 in libperl.so.5.10.1[7f516dc7d000+164000] Mar 3 11:22:37 gaz kernel: [128599.570307] php5-cgi[22888]: segfault at 36485a8 ip 00000000036485a8 sp 00007fff2d56e1c8 error 15 Mar 4 08:32:17 gaz kernel: [204779.842304] php5-cgi[22090]: segfault at 18 ip 0000000000689e5e sp 00007fff677a6a48 error 6 in php5-cgi[400000+6f9000] Mar 4 10:01:02 gaz kernel: [210104.434706] rsync[22236] general protection ip:7f14a07137f9 sp:7fff88f940b8 error:0 in libc-2.11.2.so[7f14a069d000+158000] Mar 4 11:32:22 gaz kernel: [215584.262316] BUG: unable to handle kernel paging request at 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.262331] IP: [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262343] PGD 0 Mar 4 11:32:22 gaz kernel: [215584.262350] Oops: 0010 [#2] SMP Mar 4 11:32:22 gaz kernel: [215584.262359] last sysfs file: /sys/devices/pci0000:00/0000:00:12.0/host4/target4:0:0/4:0:0:0/block/sdb/stat Mar 4 11:32:22 gaz kernel: [215584.262371] CPU 1 Mar 4 11:32:22 gaz kernel: [215584.262378] Modules linked in: cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative xt_recent xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ip6table_filter ip6_tables xt_DSCP xt_TCPMSS ipt_LOG ipt_REJECT iptable_mangle iptable_filter xt_multiport xt_state xt_limit xt_conntrack nf_conntrack_ftp nf_conntrack ip_tables x_tables loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm radeon snd_timer ttm snd drm_kms_helper soundcore drm snd_page_alloc i2c_algo_bit shpchp i2c_piix4 edac_core pcspkr k8temp evdev edac_mce_amd pci_hotplug i2c_core button ext3 jbd mbcache dm_mod powernow_k8 aacraid 3w_9xxx 3w_xxxx raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 md_mod sata_nv sata_sil sata_via sd_mod crc_t10dif ata_generic ahci pata_atiixp ohci_hcd libata r8169 mii thermal ehci_hcd processor thermal_sys scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] Mar 4 11:32:22 gaz kernel: [215584.262552] Pid: 1960, comm: proxymap Tainted: G D 2.6.32-5-amd64 #1 MS-7368 Mar 4 11:32:22 gaz kernel: [215584.262563] RIP: 0010:[<00000000ffffff9c>] [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262573] RSP: 0018:ffff880209257e00 EFLAGS: 00010212 Mar 4 11:32:22 gaz kernel: [215584.262580] RAX: ffff8801514eb780 RBX: ffffffff810efb2d RCX: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262590] RDX: 0000000000000020 RSI: 0000000000000001 RDI: ffff8801514eb780 Mar 4 11:32:22 gaz kernel: [215584.262600] RBP: 00000000ffffffe9 R08: 0000000000000000 R09: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262611] R10: ffff880209257e78 R11: ffffffff81152c7c R12: 0000000000000001 Mar 4 11:32:22 gaz kernel: [215584.262622] R13: 0000000000008001 R14: 0000000000000024 R15: 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.262633] FS: 00007fca4de35700(0000) GS:ffff880008d00000(0000) knlGS:0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 4 11:32:22 gaz kernel: [215584.262650] CR2: 00000000ffffff9c CR3: 00000001c9cbb000 CR4: 00000000000006e0 Mar 4 11:32:22 gaz kernel: [215584.262661] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262671] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 4 11:32:22 gaz kernel: [215584.262682] Process proxymap (pid: 1960, threadinfo ffff880209256000, task ffff88021c4b1c40) Mar 4 11:32:22 gaz kernel: [215584.262693] Stack: Mar 4 11:32:22 gaz kernel: [215584.262698] ffffffff810f8566 ffff880209257e78 ffff88021c7bf000 ffff88021c7bf0c8 Mar 4 11:32:22 gaz kernel: [215584.262709] <0> 0000800000000000 ffff88021fc0f000 ffff880209257e78 00000000fffffffe Mar 4 11:32:22 gaz kernel: [215584.262724] <0> ffffffff810e5881 ffff880209257f48 0000000000000286 ffff88021fc0f000 Mar 4 11:32:22 gaz kernel: [215584.262743] Call Trace: Mar 4 11:32:22 gaz kernel: [215584.262753] [<ffffffff810f8566>] ? do_filp_open+0xa7/0x94b Mar 4 11:32:22 gaz kernel: [215584.262763] [<ffffffff810e5881>] ? virt_to_head_page+0x9/0x2a Mar 4 11:32:22 gaz kernel: [215584.262771] [<ffffffff810f9904>] ? user_path_at+0x52/0x79 Mar 4 11:32:22 gaz kernel: [215584.262779] [<ffffffff810cfec1>] ? get_unmapped_area+0xd7/0x139 Mar 4 11:32:22 gaz kernel: [215584.262787] [<ffffffff811019d5>] ? alloc_fd+0x67/0x10c Mar 4 11:32:22 gaz kernel: [215584.262795] [<ffffffff810eceaf>] ? do_sys_open+0x55/0xfc Mar 4 11:32:22 gaz kernel: [215584.262804] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b Mar 4 11:32:22 gaz kernel: [215584.262811] Code: Bad RIP value. Mar 4 11:32:22 gaz kernel: [215584.262819] RIP [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262828] RSP <ffff880209257e00> Mar 4 11:32:22 gaz kernel: [215584.262833] CR2: 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.263077] ---[ end trace 1cc1473b539c7f6f ]--- As you can see there are segfaults, a general protection fault and a Kernel Oops. My first guess was that there's a Hardware problem of some sort and I asked my Hoster (it's a rented root server) to do a full hardwarecheck - they did, but couldn't find any problem. I don't know what and how they checked but their support team is usually quite good. I ran memtester and cpuburn myself and couldn't find any error either. Unfortunately I have no reliable way to reproduce these segfaults, they seem to be more or less random. On a hunch I disabled the firewall of the system and ran one of the programs that segfaulted regularily (imapsync) and it seemed to take longer to segfault than before, so the problem might be related to the network stack. Or could just be a random thing. Here are the kernel specs: # uname -a Linux gaz 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64 GNU/Linux # cat /etc/debian_version 6.0 # lsmod Module Size Used by cpufreq_userspace 1992 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 cpufreq_conservative 5162 0 xt_recent 5977 0 xt_tcpudp 2319 0 iptable_nat 4299 0 nf_nat 13388 1 iptable_nat nf_conntrack_ipv4 9833 3 iptable_nat,nf_nat nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 ip6table_filter 2384 0 ip6_tables 15075 1 ip6table_filter xt_DSCP 1995 0 xt_TCPMSS 2919 0 ipt_LOG 4518 0 ipt_REJECT 1953 0 iptable_mangle 2817 0 iptable_filter 2258 0 xt_multiport 2267 0 xt_state 1303 0 xt_limit 1782 0 xt_conntrack 2407 0 nf_conntrack_ftp 5537 0 nf_conntrack 46535 6 iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state,xt_conntrack,nf_conntrack_ftp ip_tables 13899 3 iptable_nat,iptable_mangle,iptable_filter x_tables 12845 13 xt_recent,xt_tcpudp,iptable_nat,ip6_tables,xt_DSCP,xt_TCPMSS,ipt_LOG,ipt_REJECT,xt_multiport,xt_state,xt_limit,xt_conntrack,ip_tables loop 11799 0 radeon 573996 0 ttm 39986 1 radeon drm_kms_helper 20065 1 radeon snd_hda_codec_atihdmi 2251 1 drm 142359 3 radeon,ttm,drm_kms_helper snd_hda_intel 20019 0 i2c_algo_bit 4225 1 radeon pcspkr 1699 0 i2c_piix4 8328 0 snd_hda_codec 54244 2 snd_hda_codec_atihdmi,snd_hda_intel i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4 snd_hwdep 5380 1 snd_hda_codec snd_pcm 60503 2 snd_hda_intel,snd_hda_codec snd_timer 15582 1 snd_pcm snd 46446 5 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 4598 1 snd evdev 7352 3 snd_page_alloc 6249 2 snd_hda_intel,snd_pcm k8temp 3283 0 edac_core 29261 0 edac_mce_amd 6433 0 shpchp 26264 0 pci_hotplug 21203 1 shpchp button 4650 0 ext3 106518 2 jbd 37085 1 ext3 mbcache 5050 1 ext3 dm_mod 53754 0 powernow_k8 10978 1 aacraid 59779 0 3w_9xxx 28684 0 3w_xxxx 20569 0 raid10 17809 0 raid456 44500 0 async_raid6_recov 5170 1 raid456 async_pq 3479 2 raid456,async_raid6_recov raid6_pq 77179 2 async_raid6_recov,async_pq async_xor 2478 3 raid456,async_raid6_recov,async_pq xor 4380 1 async_xor async_memcpy 1198 2 raid456,async_raid6_recov async_tx 1734 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy raid1 18431 3 raid0 5517 0 md_mod 73824 7 raid10,raid456,raid1,raid0 sata_nv 19166 0 sata_sil 7412 0 sata_via 7928 0 sd_mod 29889 8 crc_t10dif 1276 1 sd_mod ata_generic 3047 0 ahci 32374 6 r8169 29229 0 mii 3210 1 r8169 thermal 11674 0 pata_atiixp 3489 0 libata 133632 6 sata_nv,sata_sil,sata_via,ata_generic,ahci,pata_atiixp ohci_hcd 19212 0 ehci_hcd 31151 0 processor 29935 1 powernow_k8 thermal_sys 11942 2 thermal,processor scsi_mod 122149 5 aacraid,3w_9xxx,3w_xxxx,sd_mod,libata usbcore 122034 3 ohci_hcd,ehci_hcd nls_base 6377 1 usbcore # free total used free shared buffers cached Mem: 8166128 1228036 6938092 0 140412 782060 -/+ buffers/cache: 305564 7860564 Swap: 2102456 0 2102456 So, basically my questions are: How can I diagnose this further? Is there any data in the log above that could help me to isolate the troublemaker? Are there any known problems with the above hardware/software I overlooked when googling for it? Is there a way to prevent the kernel from autoloading modules (I probably don't need all these modules and one of them might be the culprit)

  Read the article

• WOL for Asus M5A97 built in Realtek Network Adapter

  - by madphp

  I cant get wake on lan to work for my built in network adapter. Its a ASUS M5A97 motherboard, and the network adapter is a Realtek PCIe GBE. I have Shutdown WakeOnLan - Enabled Wake on Magic Packet - Enabled Wake on Pattern Match - Enabled WOL & Shutdown Link Speed - 10 Mbps First I have set up a magic packet client to listen, and the packet is getting through. I have also checked these in Power Management for the network adapter. Allow the computer to turn off this device to save power Allow this device to wake the computer Allow a magic packet to wake the computer.

  Read the article

• Not enough physical memory available to run Virtual Machine

  - by unknown (google)

  hi I when i am trying to run virtual machine on VMW 6.5 it shows me following error. "Not enough physical memory is available to power on this virtual machine with its configured settings. To fix this problem, adjust the additional memory settings to allow more virtual machine memory to be swapped. If you were able to power on this virtual machine on this host computer in the past, try rebooting the host computer. Rebooting may allow you to use slightly more host memory to run virtual machines." i have also tried options that are suggested from above error, but still its not working. Can you help me to solve this problem? Thanks

  Read the article

• HP D530 Startup Error: 512 - Chassis Fan Not Detected

  - by lyrikles

  I'm using the HP D530 Motherboard/CPU that I installed in a new case with a 600W PSU. There was a problem with the onboard chassis fan connector (3-wire) not supplying sufficient power to the chassis fan indicated by the fan spinning very slowly, but I never experienced the "512 Error" at boot. Also, the same fan works perfectly connected directly to the PSU. I disconnected it since I already have plenty of fans connected via the PSU directly. Since then, on startup, I get the error: "512 - Chassis Fan Not Detected" and am asked to "Press F1 to continue". This gets quite annoying since I use this machine remotely (w/ FreeNAS). What could be causing the onboard fan connector to not be giving enough power? If this is unable to be corrected, how can I make the BIOS think there's a chassis fan plugged in without actually plugging a fan into the onboard connector? Would it be possible to jumper the pins without damaging the motherboard or PSU? Thanks,Erik

  Read the article

• Supermicro IPMI SSL

  - by churnd

  I have a Supermicro X9SCA-F serverboard and I'm trying to secure Super Doctor III IPMI by using SSL. I generated my own certs (done this many times before), uploaded via the web interface, then it said it needed to restart & I clicked OK, but it never came back up. Right now it's not listening on port 80 or 443 it seems. I also power cycled the box a few times (shutting down & physically removing power for 5 mins), but that didn't seem to help either. Before I did this, it was working fine, so I'm not sure what may have happened?

  Read the article

• Is it a fire hazard to use my wife's MacBook charger on my MacBook Pro?

  - by Nate

  (This is similar but doesn't address the fire hazard issue.) I have a MacBook Pro with an 85W power adapter. My wife has a MacBook with a 60W power adapter. We charge both computers with both adapters. Of course the MacBook Pro charges more slowly from the 60W adapter, but otherwise it's fine. However, according to this comment, using the 60W to charge the MacBook Pro is a fire hazard! Is this true? I am surprised Apple engineers would have made them interchangeable if this is the case.

  Read the article

• Charging a laptop battery, without a laptop.

  - by Crippledsmurf

  I have an old-ish laptop that only works on AC power because the battery is old and no longer holds a charge. I live in Christchurch New Zealand where there has recently been a number of very large earthquakes. During one of these earthquakes my laptop was thrown from my desk to the floor and now does not respond at all when the AC adapter is connected. Given that the laptop is not responding to power, is there another way I could charge a replacement battery for it as I don't currently have funds to repair the AC adapter on the box. My research would suggest that this isn't possible as chargers need to take into account the specifics of the model of battery being charged

  Read the article

• Mixing different generations of ATi video cards

  - by middaparka

  I'm heading in the direction of a three monitor set up and hence suspect I need to go the dual video card route. At the moment, I've a Radeon X1900GT driving two 19" monitors which I'd like to keep and augment with something like a Radeon 5570 which would drive a 22" display. As such, I'm just wondering how Catalyst will cope with this configuration and whether there are any other issues that I'm likely to encounter. In terms of the obvious, my motherboard has two PCI-E slots and my power supply has two video card power connectors, so I'm hopefully covered from that side of things. Thanks in advance.

  Read the article

• New Computer Build Questions

  - by MJ

  I'm in the process of gathering parts and specs for a new machine. I wear many hats, so the machine needs to do a lot. I need at least 2 monitor support, if not three. I also play many online MMOs (wow, aion, war hammer, etc), along with some freelance programming projects. I already have a case which is very large, so it will fit anything. I have 2 other SATA HDs. They are more for storage and basic programs. I feel that the best improvement could be done with a solid state HD, true or not? I'm more of a software/programming guy, so ANY input at all on improving this system build would be appreciated. I have a few questions with this list. AMD or Intel? I don't know enough about either to choose what would best fit me. Thanks! **EDIT: Thanks for the input everyone! Here are some answers: I do a lot of programming and gaming, so I do need things for both. The newer video card covers the gaming aspect, as well as allowing me to have many monitors. (hopefully upgrade to dual 30' or more) I don't need any additional HDs at this time. I have a SATA 160g and 120g from my previous computer, and a NAS system with over 2TB of storage on the homenetwork. I just wanted a fast HD for OS/programs/games. With the memory. I have used G.SKILL before in 2 system builds. It's done excellent for me in them. Very stable. **EDIT2: Made some additional changes. Lowered the power supply down to 750, which saves me more $$. Also changed the SSD to 2 WD 650G HDs. Thinking of doing a CPU upgrade to the 3.4GHZ AMD Phenom II X4 965 Black Edition Deneb 3.4GHz System Specs - Budget:$1500 CPU: AMD Phenom II X4 955 Black Edition Deneb 3.2GHz MB: GIGABYTE GA-MA790GPT-UD3H AM3 AMD 790GX HDMI ATX Memory: G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 1066 Video: DIAMOND 5870PE51G Radeon HD 5870 (Cypress XT) 1GB 256-bit GD Power Supply: XCLIO GREATPOWER 1000W ATX12V SLI Ready CrossFire Ready HD:Intel X25-M Mainstream SSDSA2MH080G2C1 2.5" 80GB SATA II MLC Changes: Power Supply: CORSAIR CMPSU-750TX 750W ATX12V / EPS12V HD: 2x Western Digital Caviar Blue WD6400AAKS 640GB CPU: AMD Phenom II X4 965 Black Edition Deneb 3.4GHz

  Read the article

• Linksys WRT54GC v2.0 - all connection lights flashing

  - by JC Denton

  I have just received a Linksys WRT54GC router of a friend. Apperantly it has stopped working. All lights on it are flashing apart from the power and wireless light. I have read of similar issues online but not ones describing the same set of lights flashing. I have tried connecting to the device over ethernet but failed. It's no longer accessible over wireless either. I've also tried to run the linksys utility on the cd but it failed to detect the presence of the device (attempted over ethernet, firewall switched off). I've tried pressing the reset button for 30 seconds and disconnection the power cable for 30 seconds but to no avail. Thanks for any thoughts

  Read the article

• HP ML350G6 running hyper-V 2008 r2 resets itself every 2 hours

  - by GT

  The system started resetting itself exactly every 2 hours. These are the messages in the iLO2 log: Informational iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server power restored. Caution iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server reset. It's not an ASR reset (that would show in the log) Redundant power supplies, swapped but no change. Turned off all virtual machines (i.e. now only running hypervisor) but not OK Boot HP smartstart diagnostics disk, ALL OK Diagnostic disk reports no errors Went back to booting Hypervisor and the problem is back. Seems the hyper-V system disk has got a time based program (virus) causing the reset. I thought the hypervisor had a small attack surface and should be OK. All virtual machines (SBS2008, Win7 and Win XP) and network computers are protected with TrendMicro WFBS. I am about to rebuild the disk (I have backups) but wondered if there were any suggestions to try first???

  Read the article

• HP ML350G6 running hyper-V 2008 r2 resets itself every 2 hours

  - by GT

  The system started resetting itself exactly every 2 hours. These are the messages in the iLO2 log: Informational iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server power restored. Caution iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server reset. It's not an ASR reset (that would show in the log) Redundant power supplies, swapped but no change. Turned off all virtual machines (i.e. now only running hypervisor) but not OK Boot HP smartstart diagnostics disk, ALL OK Diagnostic disk reports no errors Went back to booting Hypervisor and the problem is back. Seems the hyper-V system disk has got a time based program (virus) causing the reset. I thought the hypervisor had a small attack surface and should be OK. All virtual machines (SBS2008, Win7 and Win XP) and network computers are protected with TrendMicro WFBS. I am about to rebuild the disk (I have backups) but wondered if there were any suggestions to try first???

  Read the article

• Problem in linking an nasm code

  - by Stefano

  I'm using a computer with an Intel Core 2 CPU and 2GB of RAM. The SO is Ubuntu 9.04. When I try to compile this code: ;programma per la simulazione di un terminale su PC, ottenuto utilizzando l'8250 ;in condizione di loopback , cioè Tx=Rx section .code64 section .data TXDATA EQU 03F8H ;TRASMETTITORE RXDATA EQU 03F8H ;RICEVITORE BAUDLSB EQU 03F8H ;DIVISORE DI BAUD RATE IN LSB BAUDMSB EQU 03F9H ;DIVISORE DI BAUD RATE IN MSB INTENABLE EQU 03F9H ;REGISTRO DI ABILITAZIONE DELL'INTERRUZIONE INTIDENTIF EQU 03FAH ;REGISTRO DI IDENTIFICAZIONE DELL'INTERRUZIONE LINECTRL EQU 03FBH ;REGISTRO DI CONTROLLO DELLA LINEA MODEMCTRL EQU 03FCH ;REGISTRO DI CONTROLLO DEL MODEM LINESTATUS EQU 03FDH ;REGISTRO DI STATO DELLA LINEA MODEMSTATUS EQU 03FEH ;REGISTRO DI STATO DEL MODEM BAUDRATEDIV DW 0060H ;DIVISOR: LOW=60, HIGH=00 -BAUD =9600 COUNTERCHAR DB 0 ;CHARACTER COUNTER ;DW 256 DUP (?) section .text global _start _start: ;PROGRAMMAZIONE 8250 MOV DX,LINECTRL MOV AL,80H ;BIT 7=1 PER INDIRIZZARE IL BAUD RATE OUT DX,AL MOV DX,BAUDLSB MOV AX,BAUDRATEDIV ;DEFINISCO FATTORE DI DIVISIONE OUT DX,AL MOV DX,BAUDMSB MOV AL,AH OUT DX,AL ;MSB MOV DX,LINECTRL MOV AL,00000011B ;8 BIT DATO, 1 STOP, PARITA' NO OUT DX,AL MOV DX,MODEMCTRL MOV AL,00010011B ;BIT 4=0 PER NO LOOPBACK OUT DX,AL MOV DX,INTENABLE XOR AL,AL ;DISABILITO TUTTI GLI INTERRUPTS OUT DX,AL CICLO: MOV DX,LINESTATUS IN AL,DX ;LEGGO IL REGISTRO DI STATO DELLA LINEA TEST AL,00011110B ;VERIFICO GLI ERRORI (4 TIPI) JNE ERRORI TEST AL,01H ;VERIFICO Rx PRONTO JNE LEGGOCHAR TEST AL,20H ;VERIFICO Tx VUOTO JE CICLO ;SE SI ARRIVA A QUESTO PUNTO ALLORA L'8250 è PRONTO PER TRASMETTERE UN NUOVO CARATTERE MOV AH,1 INT 80H JE CICLO ;SE SI ARRIVA A QUESTO PUNTO SIGNIFICA CHE ESISTE UN CARATTERE DA TASTIERA MOV AH,0 INT 80H ;Al CONTIENE IL CARATTERE DELLA TASTIERA MOV DX,3F8H OUT DX,AL JMP CICLO LEGGOCHAR: MOV AL,[COUNTERCHAR] INC AL CMP AL,15 JE FINE MOV [COUNTERCHAR],AL MOV DX,TXDATA IN AL,DX ;AL CONTIENE IL CARATTERE RICEVUTO AND AL,7FH ;POICHè VI SONO 7 BIT DI DATO ;VISUALIZZAZIONE DEL CARATTERE MOV BX,0 MOV AH,14 INT 80H POP AX CMP AL,0DH ;CONTROLLO SE RETURN JNE CICLO ;CAMBIO RIGA DI VISUALIZZAZIONE MOV AL,0AH MOV BX,0 MOV AH,14 ;INT 10H INT 80H JMP CICLO ;GESTIONE ERRORI ERRORI: MOV DX,3F8H IN AL,DX MOV AL,'?' MOV BX,0 MOV AH,14 INT 80H JMP CICLO FINE: XOR AH,AH MOV AL,03 INT 80H When I compile this code "NASM -f bin UARTLOOP.asm", the compiler can create the UARTLOOP.o file without any error. When I try to link the .o file with "ld UARTLOOP.o" it tells: UARTLOOP.o: In function `_start': UARTLOOP.asm:(.text+0xd): relocation truncated to fit: R_X86_64_16 against `.data' Have u got some ideas to solve this problem? Thx =)

  Read the article

• Screensaver does not work for one user account, but does for the other

  - by Travesty3

  Both my screensaver and my "turn off monitor" power saver never come on for one user account on my computer, but it does for the other. It worked before. I can't think of anything I did just before this started happening. I'm using Windows 7 Pro SP1 with the default Aero theme, my screensaver is set to Mystify and should come on after 10 minutes. My power saver setting is set to Balanced, the Turn Off Monitor setting is set to 15 minutes, and the Sleep setting is set to Never. This all works absolutely fine on my user account, but if my wife's user account is logged in, it doesn't work. I don't have any antivirus, I'm not using a wireless keyboard or mouse, and I don't have MagicJack. I have restarted the computer many times since I've seen this problem. Anyone have any suggestions?

  Read the article

• NTRU Pseudo-code for computing Polynomial Inverses

  - by Neville

  Hello all. I was wondering if anyone could tell me how to implement line 45 of the following pseudo-code. Require: the polynomial to invert a(x), N, and q. 1: k = 0 2: b = 1 3: c = 0 4: f = a 5: g = 0 {Steps 5-7 set g(x) = x^N - 1.} 6: g[0] = -1 7: g[N] = 1 8: loop 9: while f[0] = 0 do 10: for i = 1 to N do 11: f[i - 1] = f[i] {f(x) = f(x)/x} 12: c[N + 1 - i] = c[N - i] {c(x) = c(x) * x} 13: end for 14: f[N] = 0 15: c[0] = 0 16: k = k + 1 17: end while 18: if deg(f) = 0 then 19: goto Step 32 20: end if 21: if deg(f) < deg(g) then 22: temp = f {Exchange f and g} 23: f = g 24: g = temp 25: temp = b {Exchange b and c} 26: b = c 27: c = temp 28: end if 29: f = f XOR g 30: b = b XOR c 31: end loop 32: j = 0 33: k = k mod N 34: for i = N - 1 downto 0 do 35: j = i - k 36: if j < 0 then 37: j = j + N 38: end if 39: Fq[j] = b[i] 40: end for 41: v = 2 42: while v < q do 43: v = v * 2 44: StarMultiply(a; Fq; temp;N; v) 45: temp = 2 - temp mod v 46: StarMultiply(Fq; temp; Fq;N; v) 47: end while 48: for i = N - 1 downto 0 do 49: if Fq[i] < 0 then 50: Fq[i] = Fq[i] + q 51: end if 52: end for 53: {Inverse Poly Fq returns the inverse polynomial, Fq, through the argument list.} The function StarMultiply returns a polynomial (array) stored in the variable temp. Basically temp is a polynomial (I'm representing it as an array) and v is an integer (say 4 or 8), so what exactly does temp = 2-temp mod v equate to in normal language? How should i implement that line in my code. Can someone give me an example. The above algorithm is for computing Inverse polynomials for NTRUEncrypt key generation. The pseudo-code can be found on page 28 of this document. Thanks in advance.

  Read the article

• "setpci: command not found" in CentOS

  - by spoon16

  I'm trying to configure my Mac Mini running CentOS 5.5 to start automatically when power is restored after a power loss. I understand the following command has to be executed: setpci -s 0:1f.0 0xa4.b=0 When I run that command on my machine though I get bash: setpci: command not found. Is there a package I need to install via yum or something? I'm not seeing a clear answer via Google and I looked at the man page for setpci and it doesn't mention anything. Also, does this command need to be run every time the machine starts or just once?

  Read the article

• How can I troubleshoot a "Hardware Malfunction" blue screen?

  - by AaronSieb

  My computer has suddenly started crashing to a blue screen with the following text: hardware malfunction call your hardware vendor for support *the system has halted* The crash occurs randomly during normal use. I have thus far always been able to reproduce it by transferring the contents of a large folder... But I'm not sure if this is caused by the file transfer, or simply because the transfer takes long enough for something else to trigger it. A bit about my hardware I have an dual core Intel CPU, and Asus motherboard. Video card is by nVidia, and connects via PCIe. My hard drives are in pairs, and connect via SATA to a RAID controller on the motherboard. They are configured to use a RAID0 configuration. What I've tried so far There is nothing in the Windows Event Log. WhoCrashed was unable to find any crash records. ScanDisk runs to completion (it launches prior to Windows load) and reports no errors. MemTest reports no errors (to 200% coverage). System temperatures are in the range of 40 to 50 degrees Celsius, with video card temperatures in the range of 60 to eighty degrees Celsius. I have stripped the system down to a minimal configuration (hard drive, video card, one memory module, motherboard, CPU, power supply). The problem still occurrs. However, this has allowed me to rule out a few components: It is not the video card because the problem still occurred after replacing the video card another one I had on hand. It is not the hard drive or anything software related because the problem occurred after a fresh installation of Windows on a replacement hard drive. It is not the hard drive cables because I replaced those with new ones and still had the problem. It is not the power supply because the problem still occurred after replacing the power supply with another one I had on hand. It is probably not the memory because I've tried three different memory modules in three different memory slots and was still able to replicate the issue. Is there anything I can do to confirm what's causing the issue? At the moment it seems as though it must be either the motherboard or CPU, but those are both difficult components to replace... In addition, both components are relatively new (two to three years old). I will gladly edit in any additional information I can get my hands on, and/or focus the question as I can find more details...

  Read the article

• How can I unfreeze an SSD connected to a remote server?

  - by chmac

  I don't have physical access to the machine, so I can't unplug the drive. # hdparm -I /dev/sda | grep frozen frozen The advice I've read elsewhere is to hotplug the drive, pull the power / sata cables while the machine is running. Those are not possible in this situation as I don't have physical access. I've tried power cycling the machine through the host's control panel a few times, but that hasn't worked. Is there any way I can unfreeze (unfrozen?) the drive without physical access?

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >