Search Results

Search found 55281 results on 2212 pages for 'get set'.

Page 700/2212 | < Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >

  • Port forwarding + shared connection with Ubuntu

    - by Joey Adams
    Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

    Read the article

  • SQL Server 2008 Bring Database Online trying to open a file from a drive that doesn't exist

    - by Nai
    This is my error I am facing TITLE: Microsoft.SqlServer.Smo Set offline failed for Database 'Go3D_Retailer ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\ftrow_Go3D_catalog.ndf". Operating system error 2: "2(failed to retrieve text for this error. Reason: 15105)". Database 'Go3D_Retailer' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 5120) Background to this error I've been trying to move my destination logshipping database to another physical server for analysis purposes. Because I do not have domain keys and active directory set up, I had to hack my process by using the same username/password for both the source and destination servers to get the process to work. Following that, I used this guy's solution to move the destination database to another server. However, this error occurs when I try to bring the database back online. I don't have an E drive on my server and I have no idea why it's trying to open a file from E drive. I have over a 100gb left on my hard disk so it's definitely not a space issue. This sounds like a bug... Any ideas?

    Read the article

  • backup of TFS with DPM 2007 - different backup times

    - by user46516
    I have DPM set up to back up my TFS server every 30 minutes, the reason being it's a way better interface than the quirky SQL backup interface. I also do a full backup nightly using an SQL maintenance job. My thinking is I would use DPM to restore my databases in case of losing my database and the nightly full backup would be a "just in case" the DPM restore doesn't work. I was thinking a little harder about this set up today and started to think about the fact that the DPM backup of the individual databases happens at different 30 min windows.. i.e. one happens at 13h30, another at 13h34 etc. Would this difference in time be a problem when it comes to restoring the TFS server? If I restore the databases and they are from different times, will this create corruption with pointers in one database pointing to missing items in the other database.. do the databases even rely on each other or are they completely interdependant. Lastly, how would SQL (log) backup cope with this?

    Read the article

  • Cannot find network path for computer in workgroup of home Windows XP PCs

    - by John Galt
    VMWare Workstation 6.5 is running as an app on a Windows Vista 64bit PC host. Thanks to Workstation we have 2 guest machines running: TerriVM and MattVM (both of these run Windows XP SP2). We are attempting to get virtual networking configured so we can access the files of both of these VM guest systems from other real PCs connected to this home network. We think we are close but we can't quite get it right... Here is what we've done so far: * On VM Workstation, we set "Host Virtual Network Mapping" to use VMnet0 with the setting "Bridge to an automatically chosen adapter". * On each VM guest (i.e. using Windows explorer on XP), we rightmouse on the C disk, click "Sharing" tab, set shareName to "C_Disk" and check both boxes labeled "Share this folder on the network" and "Allow network users to change my files". Symptoms: On "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \TerriVM\C_Disk and assign drive letter T. We see all the folders on this shared drive and can open files on them. So that is good. On same "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \MattVM\C_Disk and assign drive letter M. We get a message box "_The network path \mattvm\C_Disk could not be found_". Alternatively, we type just \mattvm\ into the Folder box and click "Browse" and get a dialog box where we drill down from "Entire Network" to "Microsoft Windows Network" to "Workgroup" where both TerriVM and MattVM are listed as computers on the network. Clicking the + sign next to MattVM gives an hourglass and never enables the OK button and I have to cancel. In summary, I think we've attempted to share both of these virtual machines using the same techniques and connect to them in similar fashion, but one connects properly and the other machine can be seen but no shared resources on it can be accessed. Can anyone suggest something possibly overlooked or something to try? Thanks so much in advance.

    Read the article

  • How to Eliminate Black Bars from Powerpoint videos ?

    - by appu
    Hi, I am running a digital signage system for my client. The basic installation is a vertically oriented 42" LCD TV with a 1920x1080 screen resolution (reverse of 1920x1080 when setup normally, i.e. landscaped). Please check out the following link for a basic screen divisions layout I want to setup. http://flickr.com/photos/55097319@N03/5410208856 In the division labeled "ppt" I plan to run a powerpoint presentation. The screen division is 360x1476 resolution. As there isn't an option in powerpoint to specify slide size in terms of resolution so according to this article on indezine http://indezine.com/products/powerpoint/books/perfectmedicalpres02.html to get a screen resolution of my preference I divided 360 and 1476 each by 72 which gives me 5"x 20.5" as the slide size for my ppt. After setting up slide size as per above dimensions, I used sizer (http://brianapps.net) to resize my ppt window to 360x1476 so that when I record I do not get any black bars. But after launching recording there are side black bars visible which camtasia records and brings-inside cam studio with black bars. http://www.flickr.com/photos/55097319@N03/5409597049 My question is that after doing the above and as explained in the following video link why do I still get black bars. http://feedback.techsmith.com/techsmith/topics/eliminate_black_bars_in_your_powerpoint_recordings Is there an option in camtasia to stretch the recording to cover up black bars or any other alternative way I can get rid of those black bars while I get a ppt recorded as per my preferred dimensions. Notes: In the techsmith video above it asks to adjust my desktop screen resolution which my display chipset does not allow me to set. I set up show in powerpoint to be "browsed by an individual(window)". Also signage software only supports swf's and video file formats natively and not ppt, pptx etc. Thanks bhavani.

    Read the article

  • OS X: Storing MySQL data securely, on an encrypted FileVault image using a soft link

    - by GJ
    I am trying to get a macports-installed MySQL to use a data directory stored inside my FileVault-protected home dir. I used sudo cp -a /opt/local/var/db/mysql5 ~/db/ (the -a to ensure file permissions remain intact) and then replaced the original mysql5 directory with a soft link: sudo ln -s ~/db/mysql5 /opt/local/var/db/mysql5 However, when I now try to start MySQL it fails. It follows the soft link at least to the extent that it modifies some files in the ~/db/mysql5 dir, notably the error log which gets appended to it this: 110108 15:33:08 mysqld_safe Starting mysqld daemon with databases from /opt/local/var/db/mysql5 110108 15:33:08 [Warning] '--skip-locking' is deprecated and will be removed in a future release. Please use '--skip-external-locking' instead. 110108 15:33:08 [Warning] '--log_slow_queries' is deprecated and will be removed in a future release. Please use ''--slow_query_log'/'--slow_query_log_file'' instead. 110108 15:33:08 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 110108 15:33:08 [Warning] Setting lower_case_table_names=2 because file system for /opt/local/var/db/mysql5/ is case insensitive 110108 15:33:08 [Note] Plugin 'FEDERATED' is disabled. 110108 15:33:08 [Note] Plugin 'ndbcluster' is disabled. /opt/local/libexec/mysqld: Table 'mysql.plugin' doesn't exist 110108 15:33:08 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110108 15:33:09 InnoDB: Started; log sequence number 4 1596664332 110108 15:33:09 [ERROR] /opt/local/libexec/mysqld: Can't create/write to file '/opt/local/var/db/mysql5/mac.local.pid' (Errcode: 13) 110108 15:33:09 [ERROR] Can't start server: can't create PID file: Permission denied 110108 15:33:09 mysqld_safe mysqld from pid file /opt/local/var/db/mysql5/gPod.local.pid ended I can't see why MySQL can't create the pid file, since manually creating it using the _mysql user succeeds (sudo -u _mysql touch mac.local.pid from inside ~/db/mysql5) Any ideas how to resolve this?

    Read the article

  • Replication keeps popping up on SharePoint databases

    - by Ddono25
    My typical discovery scenario: We receive an alert that the transaction log is growing quickly. We are in Simple Recovery so I go to check it out. Log is already sized to 100GB and is at 80% capacity. I run the "Whats using my log files" script from SQL Server Central and see that Replication is enabled on the database. We do not set up replication, and I don't think Replication can be done on SharePoint content db's as Replication is not supported (requires PK on all tables). This has been occurring on random servers (about 5 so far, all within the past three weeks) and it only occurs on Content Databases. sp_removedbreplication does not always work in removing the Replication either. We have found that we need to run the sp_removedbreplication, change all db owners to SA and reset Recovery Mode to Simple to completely eradicate any vestiges of this bug. How would Replication be enabling itself? We have never set up Replication on these servers. There is no evidence of any type of Replication other than the 'log_reuse_wait_desc' from the DMV query and log growth. Any help on this ghost would be appreciated!

    Read the article

  • ipmi - can't ping or remotely connect

    - by Fidel
    I've tried configuring the IPMI controller to accept remote connections, but I can't even ping it. Here is it status: #/usr/local/bin/ipmitool lan print 2 Set in Progress : Set Complete Auth Type Support : NONE PASSWORD Auth Type Enable : Callback : : User : NONE PASSWORD : Operator : PASSWORD : Admin : PASSWORD : OEM : IP Address Source : Static Address IP Address : 192.168.1.112 Subnet Mask : 255.255.255.0 MAC Address : 00:a0:a5:67:45:25 IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Enabled Gratituous ARP Intrvl : 8.0 seconds Default Gateway IP : 192.168.1.1 Default Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3 Cipher Suite Priv Max : uaaaXXXXXXXXXXX : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM # /usr/local/bin/ipmitool user list 2 ID Name Enabled Callin Link Auth IPMI Msg Channel Priv Limit 1 true false true true USER 2 admin true false true true ADMINISTRATOR # /usr/local/bin/ipmitool channel getaccess 2 2 Maximum User IDs : 5 Enabled User IDs : 2 User ID : 2 User Name : admin Fixed Name : No Access Available : callback Link Authentication : enabled IPMI Messaging : enabled Privilege Level : ADMINISTRATOR # /usr/local/bin/ipmitool channel info 2 Channel 0x2 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : multi-session Active Session Count : 0 Protocol Vendor ID : 7154 Volatile(active) Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available Non-Volatile Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available # /usr/local/bin/ipmitool chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : unknown Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false # arp Address HWtype HWaddress Flags Mask Iface 192.168.1.112 ether 00:A0:A5:67:45:25 C bond0 # /usr/local/bin/ipmitool -I lan -H 192.168.1.112 -U admin -P admin chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status In summary. It exists on the ARP list so arp's are being broadcast. I can't ping it and can't connect to it. Can anyone spot any glaring mistakes in the configuration? Many thanks, Fidel

    Read the article

  • How would I setup iMail to forward a user's mail to another service w/o leaving a copy locally?

    - by Scott Mayfield
    I have an iMail 2006 server installation in which I have a particular user that has several aliases that all point to a single user (me, for the record). I've been copying all of my mail to GMail and reading it there, but it annoys me that I have to go back weekly and log into my mail account on iMail and delete between 6 and 10 thousand copies of messages I've already received, in order to keep my mailbox from filling up (yes, I have it set with no quota, but I consider it bad form to just let the box grow indefinitely). I've got the copying setup via an inbound user rule, but I'm wondering how to accomplish a "copy and delete" rule. The manual isn't clear on what happens with multiple matching rules (will they be processed in order, or is it a first match situation?) and there isn't a means to combine multiple actions into a single rule. If I use the "forward" action, I THINK that it's going to screw up all the sender information once the mail reaches my GMail account and show it as coming from me instead of the original senders (can anyone confirm that this is accurate?) An easy answer would be to delete my user account entirely, replace it with an alias that maps to my GMail account, but then I would lose my ability to log into the system for admin duties. So that leads me to creating a second, lesser known account for admin use, but since it's a real account, sooner or later I'm going to get mail sent to it and I'll be back to the same situation of having a user account that doesn't get emptied periodically. I imagine I can set the quota to 0 MB to cause all incoming mail to my admin account to bounce, or setup an inbound rule to bounce everything, but this is starting to sound kludgy to me. Does anyone know of a more direct work around to copying a user's incoming mail to an outside server and then deleting the local copy w/o removing their account entirely? Or is this just wishful thinking?

    Read the article

  • management network to a network port for additional ones munin and monit

    - by paolo
    management network to a network port for additional ones munin and monit I want to build a separate Netzwek for server management. I have several network cards a linux / debian / ubuntu with computer. Set both network cards sin in the /etc/network/interfaces. # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 10.0.0.240 netmast 255.255.255.0 network 10.0.0.0 brodacast 10.0.0.255 gateway 10.0.0.254 auto eth1 iface eth1 inet static address 10.0.10.240 netmast 255.255.255.0 network 10.0.10.0 brodacast 10.0.10.255 post-up ip route add 10.0.0.0/24 dev eth0 src 10.0.0.240 table eth0-WAN post-up ip route add default via 10.0.0.254 table eth0-WAN post-up ip route add 10.0.10.0/24 dev eth1 src 10.0.10.240 table eth1-LAN post-up ip route add default via 10.0.10.200 table eth1-LAN post-up ip rule add from 10.0.0.240 table eth0-WAN post-up ip rule add from 10.0.10.240 table eth1-LAN still i adjusted / etc/iproute2/rt_tables and following routes set up in the /etc/network/interfaces I want to have both applications and the network interface separately as munin and monit only on eth1 and not have to eth0. it goes to the reboot but sometimes not always. # Traceroute-i eth1 10.0.10.200 not go what am I doing wrong?

    Read the article

  • ADFS Relying Party

    - by user49607
    I'm trying to set up an Active Directory Federation Service Relying Party and I get the following error. I've tried modifying the page to allow <pages validateRequest="false"> to web.config and it doesn't make a difference. Can someone help me out? Server Error in '/test' Application. A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo..."). Description: Request Validation has detected a potentially dangerous client input value, and processing of the request has been aborted. This value may indicate an attempt to compromise the security of your application, such as a cross-site scripting attack. To allow pages to override application request validation settings, set the requestValidationMode attribute in the httpRuntime configuration section to requestValidationMode="2.0". Example: <httpRuntime requestValidationMode="2.0" />. After setting this value, you can then disable request validation by setting validateRequest="false" in the Page directive or in the <pages> configuration section. However, it is strongly recommended that your application explicitly check all inputs in this case. For more information, see http://go.microsoft.com/fwlink/?LinkId=153133. Exception Details: System.Web.HttpRequestValidationException: A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo..."). Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [HttpRequestValidationException (0x80004005): A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo...").] System.Web.HttpRequest.ValidateString(String value, String collectionKey, RequestValidationSource requestCollection) +11309476 System.Web.HttpRequest.ValidateNameValueCollection(NameValueCollection nvc, RequestValidationSource requestCollection) +82 System.Web.HttpRequest.get_Form() +186 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.IsSignInResponse(HttpRequest request) +26 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.CanReadSignInResponse(HttpRequest request, Boolean onPage) +145 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.OnAuthenticateRequest(Object sender, EventArgs args) +108 System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +266 `

    Read the article

  • Find the IP of the router between me and main router/gateway?

    - by Crash893
    I have a Netgear router that is the main router/gateway in and out of the network. Then I have a Linksys 54g router with WiFi that we use as are main WiFi access point The Cat5 runs from the router to the WiFi routers LAN port (not WAN). And then if you connect to that WAP you are basically on the network. I want to be able to find out what the IP address of that WAP is but so far I can't figure out how to: I've tried doing a tracert to the gateway IP but I get nothing. I've scanned all the IP addressed in the network. I've gone to the Netgear main router and looked under attached devices but it doesn't say anything. Any ideas on how I can figure out how to administer it? (I do have limited physical access but my attempt to plug into it came back with a faulty IP (in the 169 range where the rest of the office is 192.168...). I never set this router up to begin with so I'm reluctant to just kill it with the reset button because I can't get into see what the settings are set to.

    Read the article

  • iptables forwarding to a dummy interface

    - by madinc
    Hi, I'm trying to accomplish the following: I have a box with a service listening on a dummy interface (say 172.16.0.1), udp port 5555. Now what I'd like to do is to take packets that arrive on interfaces eth0 (1.1.1.1:5555) and eth1 (2.2.2.2:5555) and forward them to the service on the dummy interface, and have replies go back to clients out the same physical interface they came in. Clients must think they're talking to 1.1.1.1:5555 or 2.2.2.2:5555. I think I need a mix of iptables rules and packet marking, plus some iproute rules (if it's possible at all). What I tried is to catch packets coming in from eth0 and eth1, udp port 5555, and mark them with 1 and 2 respectively, and --save-mark in the connmark. Then I used a DNAT to 172.16.0.1. The service seems to be getting the packets. Now I'm not sure how to do the reverse. It seems that for packets originating from the box, you can't do anything before the routing decision, but that would be the place to restore the marks, and thus make a routing decision based on those. Here's what I have so far: iptables -t mangle -A PREROUTING -d 1.1.1.1 -p udp --port 5555 -j MARK --set-mark 1 iptables -t mangle -A PREROUTING -d 2.2.2.2 -p udp --port 5555 -j MARK --set-mark 2 iptables -t mangle -A PREROUTING -d 1.1.1.1 -p udp --port 5555 -j CONNMARK --save-mark iptables -t mangle -A PREROUTING -d 2.2.2.2 -p udp --port 5555 -j CONNMARK --save-mark iptables -t nat -A PREROUTING -m mark --mark 1 -j DNAT --to-destination 172.16.0.1 iptables -t nat -A PREROUTING -m mark --mark 2 -j DNAT --to-destination 172.16.0.1 # What next? As I said, I'm not even sure it can be done. To give a bit of background, it's an old OpenVPN installation that cannot be upgraded (otherwise I'd install a recent version that supports multihoming natively). Thanks for any help.

    Read the article

  • IIS SSL is taking all IPs although it is told not to

    - by Martin Sall
    I have a testing system where IIS Express on Windows 7 SSL website has to live together with Cerberus FTP server SSL website (Cerberus FTP has a built-in web server for HTTP uploads). I have set up Windows to use two IPs from my router 192.168.1.128 (for IIS SSL Web Site, using a self-generated SSL certificate for now) 192.168.1.129 (for Cerberus FTP built-in SSL Web Site) In IIS I have set web site binding to use only the IP 192.168.1.128. But still when I launch Cerberus, it says - cannot bind 192.168.1.129:443. I tested in Firefox - indeed, when I go to 192.168.1.129 (or even localhost), I do not get “Unable to connect“ page as expected, but “The connection was reset” instead. IIS is still occupying those IPs, although it is not serving the website on those IPs. When I stop the IIS website, Cerberus FTP Website launches without problems. But then I cannot launch IIS web site, it tells - "The process cannot access the file because it is being used by another process". Why is IIS SSL web site still occupying all IPs?

    Read the article

  • Is there an SSL equivelent to an ssh agent?

    - by Matthew J Morrison
    Here is my situation: There are a number of developers who all need to have access to be able to install ruby gems and python eggs from a remote source. Currently, we have a server inside our firewall that hosts the gems and eggs. We now want the ability to be able to install things hosted on that server outside of our firewall. Since some of the gems and eggs that we host are proprietary I would like to somewhat lock access to that machine down, as unobtrusively as possible to the developers. My first thought was using something like ssh keys. So, I spent some time looking at SSL mutual authentication. I was able to get everything set up and working correctly, testing with curl, but the unfortunate thing was that I had to pass extra arguments to curl so it knows about the certificate, key and certificate authority. I was wondering if there is anything like the ssh agent that I can set up to provide that information automatically so that I can push the certificates and keys to the developer's machines so the developers don't have to log in or provide keys each time they try to install something. Another thing that I want to avoid is having to modify the 'gem' command and the 'pip' command to provide keys when they make the http connection. Any other suggestions that may solve this problem (not related to ssl mutual auth) are also welcome. EDIT: I've been continuing to research this and I came across stunnel. I think this may be what I'm looking for, any feedback regarding stunnel would also be great!

    Read the article

  • Group policy not applying to security group

    - by ihavenoideawhatimdoing
    Preface: I have enough privileges to create GPOs in my OU, and have made a few of them for some simple tasks (like deploying a printer to certain users). Not actually a sysadmin...I'm a developer who is winging it. I wanted to create a GPO that would set a mapped folder for a certain security group (which I recently created and that contains only myself). Did the following: Created the GPO in MyOU - Users Removed the default Authenticted Users under Security Filtering Add the security group with my account to Security Filtering Set up the mapping via the User Configuration option Changed GPO Status to "Computer configuration settings disabled" Left WMI filtering to Closed the GPO at this point... Logged in as the target user; ran gpupdate /force Logged out, logged in, ran gpresult /r, no mention of my GPO Rebooted Logged in, re-ran gpupdate /force Logged out, logged in, ran gpresult /r, still no mention of my GPO If I log in with another completely different user, their RSOP information shows that the new GPO is being ignored due to a security restriction, so it appears to be "working" for other users. I just can't get it to actually show up in RSOP for the user it should be working. Is there anything else I can do short of rebooting endlessly and crossing my fingers?

    Read the article

  • Find out when a system went down?

    - by Clinton Blackmore
    I have a Mac OS X 10.5 server, with a RAID set in it, that went down due to a power outage on Thursday, and the machine is not happily booting right now*. It is possible to find out when the machine went down, while not booted off the internal drive? (I'm booted off an external drive, waiting for the RAID sets to initialize.) Normally, I'd run last. The man page doesn't indicate that I can run it against a different startup volume. It looks possible to parse /var/log/utmpx, but I don't think it'd be worthwhile to try to do that from scratch for this one-off problem. * I'm still trying to figure out why it isn't happy, and may ask a follow-up question. Right now I can see that UserNotificationCenter crashed repeatedly early Thursday morning, and that securityd, mdworker, and ARDAgent crash shortly after startup [I think -- I want to verify when the box went up and down]. The login window does not come up right (I think it is crashing or not able to cope with a dead securityd). The box is supposed to be set to go down when the UPS tells it power is out; at the moment, I'm wondering if it went down, and turned back on multiple times! I sure hope not.

    Read the article

  • Mongrel Cluster on Ubuntu Server Karmic

    - by trobrock
    I am trying to get mongrel cluster working on my Ubuntu Server Karmic box in preparation to setup Capistrano. I've been trying to get the two to work all day and finally decided to completely remove Capistrano and see if I can just get Mongrel Cluster to work. I ran this to install mongrel cluster: gem install mongrel mongrel_cluster Everything installed fine, when I change into my app's directory... # mongrel_rails -bash: mongrel_rails: command not found I can run it from its install location: # /var/lib/gems/1.8/bin/mongrel_rails Usage: mongrel_rails <command> [options] Available commands are: ... It lets me build the cluster configuration file fine, but when I run the clister:start command: # /var/lib/gems/1.8/bin/mongrel_rails cluster::start starting port 8000 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8000 -P tmp/pids/mongrel.8000.pid -l log/mongrel.8000.log starting port 8001 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8001 -P tmp/pids/mongrel.8001.pid -l log/mongrel.8001.log starting port 8002 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8002 -P tmp/pids/mongrel.8002.pid -l log/mongrel.8002.log It seems it isnt calling it from the right directory after that command, what can I do to fix this? I tried setting the path previously when trying to set up Capistrano, but the path didnt stay set when Capistrano used ssh to run the commands.

    Read the article

  • Options for small windows network setup without dedicated server?

    - by Mitch
    I'm very weak on networking and hope someone can point me in the right direction: I have written some windows client/server software which incorporates a database which is located on a windows server. I have a test installation running at a customer's office where the server has a static IP address. In this case its easy for the clients to access the database because of the fixed IP address. Also, customers with network servers generally have specialist support staff to set up my software, so its not such a problem for me. However I also need to offer the software to customers who have small offices with less than 10 PCs and no dedicated network server. In this case I want the customer to be able to nominate one PC as the database "server" and install my software and have the clients access it. But in this situation I believe the "server" PC may not have a dedicated IP address. Q1: What is the best way to set this up simply and make it work? Can I reliably reference the "server" by using its name, or is there a way to assign dummy fixed IP addresses? Ideally this needs to be workable on small networks running a mixture of XP/Vista/Windows7 as my target market may well have mixed OSes etc. I guess this would be akin to home networking? Many thanks Mitch

    Read the article

  • Gvim on Windows 7: ALT codes not working

    - by John Sonderson
    I would like to be able to enter ALT codes in Gvim on Windows 7 as documented on the following site: Alt Codes On Windows (Windows 7 in my case), to generate a character via an ALT code you make sure that the NumLock key on your keypad is toggled on, hold down the ALT key, enter the keycode on the numeric keypad, and then release the ALT key. However this does not work in Gvim on Windows (which ignores the fact that I am pressing the ALT key and just prints to entered keypad key directly onto the screen). How can I get these keystroke combinations to work in Gvim as well? Thanks. EDIT: As the answer below points out, the way to insert non-ASCII characters for which you do not have entries on your keyboard without changing the keyboard layout is as follows: Make sure you are in insert mode, and then type CTRL-V followed by the Unicode character code of interest, for instance: CTRL-V u00E0 (generates à) CTRL-V u00C8 (generates È) CTRL-V u00E8 (generates è) CTRL-V u00E9 (generates é) CTRL-V u00EC (generates ì) CTRL-V u00F2 (generates ò) etc... See for instance http://unicode-table.com/ for a full list of Unicode character codes. The following list of Unicode characters by language may also be useful: http://en.wikipedia.org/wiki/List_of_Unicode_characters In some cases such as this one, though, there might be an easier way to enter special characters (see :help digraphs and :digraphs). For example, while in insert mode you may be able to type the following: CTRL-K E! (yields É) CTRL-K a' (yields á) Note that as the following page shows: http://code.google.com/p/vim/source/browse/runtime/doc/digraph.txt Gvim 7.4 contains an even wider set of default digraphs than Gvim 7.3, thus providing convenience to an even broader set of languages. Regards.

    Read the article

  • Maximum limit of filepointer in php reached and not changeable

    - by mlaug
    I have a server with the current 5.3.x version installed. Since we are running a really simple and small server in php using sockets, that connects to a lot clients using sockets we need to raise the open file limit that has been already done on the server for the user, that runs the server #ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 29879 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 8192 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 29879 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited and we compiled php with --enable-fd-setsize=8192 still we are getting [19-Nov-2012 09:24:23 Europe/Berlin] PHP Warning: socket_select(): You MUST recompile PHP with a larger value of FD_SETSIZE. It is set to 1024, but you have descriptors numbered at least as high as 1024. --enable-fd-setsize=2048 is recommended, but you may want to set it to equal the maximum number of open files supported by your system, in order to avoid seeing this error again at a later date. once in a while in our logs. Anyone knows who to configure the unix server and php correctly to have that working? I found a bug, but that is related to 2006 and marked as "not a bug" https://bugs.php.net/bug.php?id=37025&edit=1

    Read the article

  • 403 with Apache and Symfony on Ubuntu 10.04

    - by Dominic Santos
    I'm trying to run symfony on my apache installation (I'm using xampp for the whole package) and it keeps giving me a 403 error every time I try to access my website. I've got vhosts set up with the following: <VirtualHost *:80> ServerName localhost DocumentRoot "/opt/lampp/htdocs" DirectoryIndex index.php <Directory "/opt/lampp/htdocs"> AllowOverride All Allow from All </Directory> </VirtualHost> <VirtualHost *:80> ServerName servername.localhost DocumentRoot /home/me/web/server/web DirectoryIndex index.php Alias /sf "/lib/vendor/symfony/data/bin/web/sf" <Directory "/home/me/web/server/web"> AllowOverride All Allow from All </Directory> </VirtualHost> <Directory "/lib/vendor/symfony/data/bin/web/sf"> Allow from All </Directory> I've also added "127.0.0.1 servername.localhost" in my hosts file. When I try to access "servername.localhost" it just gives me a 403 error. I've chmod'd 777 the symfony directory and my website directory in my home directory and used './symfony project:permissions' to let symfony check that permissions are set up correctly but still not result. If I move my website directory into "/opt/lampp/htdocs" then it will serve it from there but still has problems access the symfony stuff such as the debug toolbar. Any help would be appreciated.

    Read the article

  • How to forever disable driver signature enforcement in Windows 8

    - by IneedHelp
    Is there a way to forever disable driver signature enforcement in Windows 8? I keep seeing this solution posted on various blogs and forums: bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS bcdedit -set TESTSIGNING ON but it is not working, at least not like when you manually disable driver signature enforcement. To disable driver signature enforcement, I currently have to do this everytime I restart my PC: 1. From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon). 2. Click ‘More PC Settings’. 3. Click ‘General’. 4. Scroll down, and click ‘Restart now’ under ‘Advanced startup’. 5. Click ‘Troubleshoot’. 6. Click ‘Advanced Options’ 7. Click ‘Windows Startup Settings’ 8. Click Restart. Is there at least a way to create a shortcut or something? F8, Shift+F8 don't work any more at boot. These MS developers freaks really want everything their way only. What's worse is that when I have to power up my PC, I first have to start normally and then restart with driver signature enforcement disabled, because there is no way to tell Windows 8 to show the troubleshoot screen when a PC is powered up.

    Read the article

  • Connecting 2 different subnet masks

    - by Jonathan
    I'm no network genius, but I have managed to get most things running. I get confused about subnets and gateways though. We have an office server connected to around 20 PC's that all communicate fine. We have just gotten a cutting machine that won't connect to our network. The server has DHCP, but that fails on the cutting machine, so I've been trying to set the IP manually. Server details are as follows: IP: 10.1.1.12 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 Internet connection is via the modem which is 10.1.1.1 An office PC is ussually set up through DHCP and has the following settings: IP: 10.1.1.36 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 PRIMARY DNS: 10.1.1.12 Cutting Machine computer has 2 network ports. 1 is specifically for the communication between the PC and the cutting machine. It's details must be as follows: IP: 10.100.100.2 SUBNET: 255.255.255.252 GATEWAY: BLANK The other network port need to connect to the server. I was told that the IP and SUBNET need to be as follows: IP: 10.100.100.1 SUBNET: 255.255.255.252 GATEWAY: ?? How can I connect this port to the server and/or the internet. If anyone can offer assistance, it would really be appreaciated.

    Read the article

  • Linux authentication via ADS -- allowing only specific groups in PAM

    - by Kenaniah
    I'm taking the samba / winbind / PAM route to authenticate users on our linux servers from our Active Directory domain. Everything works, but I want to limit what AD groups are allowed to authenticate. Winbind / PAM currently allows any enabled user account in the active directory, and pam_winbind.so doesn't seem to heed the require_membership_of=MYDOMAIN\\mygroup parameter. Doesn't matter if I set it in the /etc/pam.d/system-auth or /etc/security/pam_winbind.conf files. How can I force winbind to honor the require_membership_of setting? Using CentOS 5.5 with up-to-date packages. Update: turns out that PAM always allows root to pass through auth, by virtue of the fact that it's root. So as long as the account exists, root will pass auth. Any other account is subjected to the auth constraints. Update 2: require_membership_of seems to be working, except for when the requesting user has the root uid. In that case, the login succeeds regardless of the require_membership_of setting. This is not an issue for any other account. How can I configure PAM to force the require_membership_of check even when the current user is root? Current PAM config is below: auth sufficient pam_winbind.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account sufficient pam_winbind.so account sufficient pam_localuser.so account required pam_unix.so broken_shadow password ..... (excluded for brevity) session required pam_winbind.so session required pam_mkhomedir.so skel=/etc/skel umask=0077 session required pam_limits.so session required pam_unix.so require_memebership_of is currently set in the /etc/security/pam_winbind.conf file, and is working (except for the root case outlined above).

    Read the article

< Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >