Search Results

Search found 21319 results on 853 pages for 'state management'.

Page 702/853 | < Previous Page | 698 699 700 701 702 703 704 705 706 707 708 709  | Next Page >

  • Is execution of sync(8) still required before shutting down linux?

    - by Amos Shapira
    I still see people recommend use of "sync; sync; sync; sleep 30; halt" incantations when talking about shutting down or rebooting Linux. I've been running Linux since its inception and although this was the recommended procedure in the BSD 4.2/4.3 and SunOS 4 days, I can't recall that I had to do that for at least the last ten years, during which I probably went through shutdown/reboot of Linux maybe thousands of times. I suspect that this is an anachronism since the days that the kernel couldn't unmount and sync the root filesystem and other critical filesystems required even during single-user mode (e.g. /tmp), and therefore it was necessary to tell it explicitly to flush as much data as it can to disk. These days, without finding the relevant code in the kernel source yet (digging through http://lxr.linux.no and google), I suspect that the kernel is smart enough to cleanly unmount even the root filesystem and the filesystem is smart enough to effectively do a sync(2) before unmounting itself during a normal "shutdown"/"reboot"/"poweorff". The "sync; sync; sync" is only necessary in extreme cases where the filesystem won't unmount cleanly (e.g. physical disk failure) or the system is in a state that only forcing a direct reboot(8) will get it out of its freeze (e.g. the load is too high to let it schedule the shutdown command). I also never do the "sync" procedure before unmounting removable devices, and never hit a problem. Another example - Xen allows the DomU to be sent a "shutdown" command from the Dom0, this is considered a "clean shutdown" without anyone having to login and type the magical "sync; sync; sync" first. Am I right or was I lucky for a few thousands of system shutdowns?

    Read the article

  • Cheap Solution for Routing a Toll Free Number to a Standard POTS Number

    - by VxJasonxV
    I do some technical work for an Internet Radio Show/Podcast, and need to fix something that has been broken for a while. The hosts have a Skype-In number to take listener calls, and for convenience sake, I bought and paid for a toll free number for a period of time. I used to use Asterlink for routing calls, but they folded and sent my number to OneBox, but they're ridiculously expensive by comparison. I'm looking for a cheap solution for this one simple task. Forward toll free calls to a skype-in number. The definition of cheap is as cheap or cheaper than Asterlink was. I paid something like $2 a month, and then the termination/call rate, which was a fraction of a sent for termination, and only whole cents after some serious time on the call. A $20 preload lasted me months at a time. I don't want to be upsold too, I want a simple web based management screen (CDR/stats are fun!), and obviously, it needs to be reliable. What vendors out there are you a fan of that solves this need?

    Read the article

  • Replacing DropBox with: Amazon S3 + SSL + GPG/TrueCrypt + Mounting on OSX ??

    - by Matt Rogish
    So, right now we're using DropBox to share various data files around between approximately 10 Mac OS X systems. However, we already have an S3 account and everyone on the lowest DropBox plan of $10/mo seems too expensive. So, I am contemplating something that would allow us to replace DropBox with our own home-grown solution. We are all fairly technical people and/or smart enough to follow some steps, so if it's not as "user friendly" as DropBox we're all comfortable with that. There are plenty of docs out there that have bits and pieces of what I want but some of the tools don't seem to fit the requirements: Transport security via SSL to the bucket Encryption of bucket contents Bi-directional syncing Most of the scripts I can find on the internet use "duplicity" which appears to fail #1 (it doesn't look like duplicity supports SSL to S3 - the docs don't state but the protocol looks plain old http http://www.nongnu.org/duplicity/duplicity.1.html#sect6 ) Many scripts use gpg to encrypt files. This seems like it could work, however I have to make sure that each OSX client is able to use the same key to encrypt and decrypt files (key management is left to me to manage). Finally, most of the scripts use one-way replication, e.g. using Amazon S3 as a simple backup store. As we'd be using Amazon S3 as the "repository" they fail this one. Whew. So, I'd love a single tool that does this but after an exhaustive search I don't think one exists. I'd be happy just knowing which tools out there can fulfill my 3 requirements, after that I can stitch together the rest. Any thoughts? THANKS!

    Read the article

  • Why can't I physically access my machine after a remote session?

    - by Steve Crane
    I have a Dell Optiplex 960 desktop running Windows 7 64-bit at work. I typically leave it locked rather than logged off when I go home, so that I'm able to remote in from home and continue working if I wish. This is where the problem comes in. If I don't remote in there is no problem and I can simply unlock the next morning. It's when I do remote in that I have a problem. Remote sessions work as expected but when I get to work the next morning the machine appears to have gone into a sleep or hibernate state, from which no amount of mouse moving or keyboard pounding will wake it. The machine is not hanging as remote sessions to it are still possible; it seems that physical access from it's own mouse and keyboard are lost. The only way to gain access is to press and hold the power switch for several seconds until the machine shuts down. Of course this means Windows does not gracefully shut down and after powering up it takes several minutes for the machine to boot and reach the login prompt; presumably while it checks the disk. Has anyone else seen something like this?

    Read the article

  • Most scalable way of serving a small set of static HTTP content

    - by Ekevoo
    The story: Hi guys. I'm among the people responsible for serving the results of the most anticipated (by number of people participating) annual entrance exam in my state. As such, when our results are published, the interest is overwhelming. In the past we delegated the responsibility of serving the results to the media, but that spoils a little the officialness of these results. This year we went with a little (long overdue) experiment of using lighttpd instead of Apache as well as other physical network optimizations I wasn't directly involved with. The results were very satisfactory. The server didn't choke even once, nor we saw any of the usual Twitter complaints on unavailability and/or slowness that were previously common. However, because we still delegated the first publication of the results to the media I'm still not 100% sure we can handle the load of actually publishing the results first. The question: Now because these files are like 14MB in total and a true lightweight Linux distribution isn't that big either, I'm thinking: what if next year we run full RAMdrive? Is there any? Is that useful? Is that worth it for a team that uses Debian almost exclusively? Are there other optimizations that I should be focusing on instead?

    Read the article

  • Windows 7 Explorer keeps crashing

    - by Daniel Liang
    I currently have an issue with Windows Explorer. It keeps crashing when I browse through a network drive. This is happening on several computers. I have already obtained a crash dump file but it doesn't state much: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\LocalDumps\explorer.exe.3964.dmp] User Mini Dump File with Full Memory: Only application data is available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible Product: WinNt, suite: SingleUserTS Machine Name: Debug session time: Mon Oct 21 11:21:30.000 2013 (UTC - 4:00) System Uptime: 0 days 0:06:20.449 Process Uptime: 0 days 0:05:54.000 ................................................................ ................................................................ .... Loading unloaded module list ............. This dump file has an exception of interest stored in it. The stored exception information can be accessed via .ecxr. (f7c.fe4): Access violation - code c0000005 (first/second chance not available) eax=00000000 ebx=07a3f080 ecx=00000400 edx=00000000 esi=00000002 edi=00000000 eip=76e170f4 esp=07a3f030 ebp=07a3f0cc iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 ntdll!KiFastSystemCallRet: 76e170f4 c3 ret I've already tried removing certain context menu items. I disabled all unnecessary start-up items. Ran memtest86 and it looks fine on that end. It also happens when I browse through my local disk. Can anyone take a look into this? Thanks!

    Read the article

  • Exchange 2010 CAS Removal == Broken???

    - by Doug
    Hi there, I recently upgraded to exchange 2010 and have a setup with 2 of my servers running CAS roles - EXCH01, EXCH02 EXCH02 just happens to also have a mailbox role where a lot of the users sit EXCH01 is my front facing CAS server, and is facing the net with SSL etc and incoming mail moving through it as a hub transport layer server as well. As i was trying to lean things out in my VM environment i removed the CAS role from EXCH02 and all hell broke loose. All the mail users that have a mailbox on EXCH02 had their homeMTA set to a deleted items folder in AD and so did their msExchHomeServer properties. After a complete battle i manually fixed these issues to the oldvalues, and in the mean time reinstalled CAS on EXCH02 (management was going nuts with out OUTLOOK working so i just put things back the way they were in a hurry.) I must add as a strange thing on the side, that before i reset these to point at EXCH02 i tried EXCH01 and it failed. I still want to remove the CAS role from EXCH02 as it should really not have it (error on install/planning on my part) and would have thought that this would not cause the issues it did, i assumed that the fact that there was another CAS server in the admin group all would be good. Was i wrong in my assumption? and what can i do to complete this successfully the second time round? Do i need to rehome all the mailboxes to the CAS server? is this a bug in the role uninstall?

    Read the article

  • Wireless does not work on Ubuntu 9.04

    - by Yongwei Xing
    Hi all I install the Ubuntu 9.04 my old Lenovo Y520 laptop, the wirless does not work.My Wireless card is Intel Pro/wireless 2100 card. But I can not enable it. My wired card is working well. Does anyone meet it before. the ifconfig output is eth0 Link encap:Ethernet HWaddr 00:0a:e4:5f:6c:30 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:973 errors:0 dropped:0 overruns:0 frame:0 TX packets:1025 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:574701 (574.7 KB) TX bytes:169249 (169.2 KB) Interrupt:10 eth1 Link encap:Ethernet HWaddr 00:0c:f1:58:79:b5 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:10 Base address:0x8000 Memory:d0202000-d0202fff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) the output of iwconfig is eth1 unassociated ESSID:off/any Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:off Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I have another question. When my OS is 9.04, there is a icon about network connection on the panel at the top. After I upgraded to 9.10, that icon disappeared. How can I get that back? Best Regareds,

    Read the article

  • Keepalived for more than 20 virtual addresses

    - by cvaldemar
    I have set up keepalived on two Debian machines for high availability, but I've run into the maximum number of virtual IP's I can assign to my vrrp_instance. How would I go about configuring and failing over 20+ virtual IP's? This is the, very simple, setup: LB01: 10.200.85.1 LB02: 10.200.85.2 Virtual IPs: 10.200.85.100 - 10.200.85.200 Each machine is also running Apache (later Nginx) binding on the virtual IPs for SSL client certificate termination and proxying to backend webservers. The reason I need so many VIP's is the inability to use VirtualHost on HTTPS. This is my keepalived.conf: vrrp_script chk_apache2 { script "killall -0 apache2" interval 2 weight 2 } vrrp_instance VI_1 { interface eth0 state MASTER virtual_router_id 51 priority 101 virtual_ipaddress { 10.200.85.100 . . all the way to . 10.200.85.200 } An identical configuration is on the BACKUP machine, and it's working fine, but only up to the 20th IP. I have found a HOWTO discussing this problem. Basically, they suggest having just one VIP and routing all traffic "via" this one IP, and "all will be well". Is this a good approach? I'm running pfSense firewalls in front of the machines. Quote from the above link: ip route add $VNET/N via $VIP or route add $VNET netmask w.x.y.z gw $VIP Thanks in advance. EDIT: @David Schwartz said it would make sense to add a route, so I tried adding a static route to the pfSense firewall, but that didn't work as I expected it would. pfSense route: Interface: LAN Destination network: 10.200.85.200/32 (virtual IP) Gateway: 10.200.85.100 (floating virtual IP) Description: Route to VIP .100 I also made sure I had packet forwarding enabled on my hosts: $ cat /etc/sysctl.conf net.ipv4.ip_forward=1 net.ipv4.ip_nonlocal_bind=1 Am I doing this wrong? I also removed all VIPs from the keepalived.conf so it only fails over 10.200.85.100.

    Read the article

  • URL Redirect Configuration in Virtualhost for a Single Page Web Application

    - by fenderplayer
    I have a web application under development that I am running locally. The home page of the application is fetched with the following url: http://local.dev/myapp/index.shtml When the app runs, javascript on the webpage maintains the url and the app state internally. Some of the other urls read as: http://local.dev/myapp/results?param1=val1&param2=val2 http://local.dev/myapp/someResource Note that there are no pages named results.html or someResource.html on my web server. They are just made up URLs to simulate RESTfulness in the single page app. All the app code - javascript, css etc - is present in the index.shtml file So, essentially, the question is how can I redirect all requests to the first URL above? Here's how the vhost configuration looks like: <VirtualHost 0.0.0.0:80> ServerAdmin [email protected] DocumentRoot "/Users/Me/mySites" ServerName local.dev RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(myapp|myapp2)\/results\?.+$ $1/index.shtml [R=301,L] <Directory "/Users/Me/mySites/"> Options +Includes Indexes MultiViews FollowSymlinks AllowOverride All Order allow,deny Allow from all </Directory> ErrorLog "/private/var/log/apache2/error.log" CustomLog "/private/var/log/apache2/access.log" common </VirtualHost> But this doesn't seem to work. Requesting the other URLs directly results in 404 error.

    Read the article

  • ADUC Exchange tabs - Windows 7 & Exchange 2003

    - by John Gardeniers
    I have the admin tools install on a Win 7 64 bit machine but would like to see the Exchange tabs in ADUC. Googling shows this is a popular request and the most common solution (and the only one which appears to work to all) is to install Exchange Server Management for Vista using esmvista.msi /q. That may well have worked on beta versions of Win 7 but is definitely not working with my OEM copy of Win 7. Can this perhaps be made to work by installing from an Exchange 2007 CD (which I don't have at this time), bearing in mind that we have Exchange 2003 only? Can someone please offer a solution that works? I figure some of you must have solved this by now. Edit: I don't know if this is relevant or not but the Win 7 machine is also running Office 2010 Pro. About the bounty I had intended to award the bounty to gWaldo for having taken the extra steps to try to help me with this issue. However, as I was about to do so my screen started scrolling and I actually clicked on the answer posted by natxo asenjo, who's answer offended me, without realising it. Perhaps if I wasn't rushing I might have noticed but that's now history.

    Read the article

  • FreeBSD's ng_nat stopping pass the packets periodically

    - by Korjavin Ivan
    I have FreeBSD router: #uname 9.1-STABLE FreeBSD 9.1-STABLE #0: Fri Jan 18 16:20:47 YEKT 2013 It's a powerful computer with a lot of memory #top -S last pid: 45076; load averages: 1.54, 1.46, 1.29 up 0+21:13:28 19:23:46 84 processes: 2 running, 81 sleeping, 1 waiting CPU: 3.1% user, 0.0% nice, 32.1% system, 5.3% interrupt, 59.5% idle Mem: 390M Active, 1441M Inact, 785M Wired, 799M Buf, 5008M Free Swap: 8192M Total, 8192M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 11 root 4 155 ki31 0K 64K RUN 3 71.4H 254.83% idle 13 root 4 -16 - 0K 64K sleep 0 101:52 103.03% ng_queue 0 root 14 -92 0 0K 224K - 2 229:44 16.55% kernel 12 root 17 -84 - 0K 272K WAIT 0 213:32 15.67% intr 40228 root 1 22 0 51060K 25084K select 0 20:27 1.66% snmpd 15052 root 1 52 0 104M 22204K select 2 4:36 0.98% mpd5 19 root 1 16 - 0K 16K syncer 1 0:48 0.20% syncer Its tasks are: NAT via ng_nat and PPPoE server via mpd5. Traffic through - about 300Mbit/s, about 40kpps at peak. Pppoe sessions created - 350 max. ng_nat is configured by by the script: /usr/sbin/ngctl -f- <<-EOF mkpeer ipfw: nat %s out name ipfw:%s %s connect ipfw: %s: %s in msg %s: setaliasaddr 1.1.%s There are 20 such ng_nat nodes, with about 150 clients. Sometimes, the traffic via nat stops. When this happens vmstat reports a lot of FAIL counts vmstat -z | grep -i netgraph ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP NetGraph items: 72, 10266, 1, 376,39178965, 0, 0 NetGraph data items: 72, 10266, 9, 10257,2327948820,2131611,4033 I was tried increase net.graph.maxdata=10240 net.graph.maxalloc=10240 but this doesn't work. It's a new problem (1-2 week). The configuration had been working well for about 5 months and no configuration changes were made leading up to the problems starting. In the last few weeks we have slightly increased traffic (from 270 to 300 mbits) and little more pppoe sessions (300-350). Help me please, how to find and solve my problem?

    Read the article

  • Why *do* windows print queues occasionally choke on a print job

    - by Ian
    Y'know they way windows print queues will occasionally stop working with a print job at the head of the queue which just won't print and which you can't delete? Anyone know whats going on when this happens? I've been seeing this since the NT4 days and it still happens on 2008. I'm talking about standard IP connected laser printers - nothing fancy. I support a lot of servers and loads of workstations and see this happen a few times a year. The user will call saying they can't print. When you examine the print queue, which in my case will generally be a server based queue shared out to the workstations, you find a print job which you cannot cancel. You also can't pause it, reinitialize it, nothing. Stopping the spooler is the usual trick and works sometimes. However I occasionally see cases which even this doesn't cure and which a reboot is the only solution. Pause the queue, reboot, when it comes back up the job can then be deleted. Once gone the printer happily goes back to its normal state. No action is ever necessary on the printer. I regard having to reboot as last resort and don't like it. What on earth can be going on when stopping the process (spooler) and restarting it doesn't clear a problem? Its not linked to any manufacturer either. I've seen this on HPs, lexmark, canon, ricoh, on lasers, on plotters.... can't say I ever saw this on dot matrix. Anyone got any ideas as to what may be going on. Ian

    Read the article

  • Cannot Access Local Network Shares (Strange Schannel and lsass.exe issues)

    - by Fake
    When I browse to my own computer's shares by going to \\MYCOMPUTERNAME\ ; I cannot access any of the shares on my LOCAL machine (nor can I access them remotely) and it generates about 40 of the following errors in my system event log: The following fatal alert was generated: 10. The internal error state is 1203. Details: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" /> <EventID>36888</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2011-04-05T13:52:09.144278900Z" /> <EventRecordID>79628</EventRecordID> <Correlation /> <Execution ProcessID="552" ThreadID="672" /> <Channel>System</Channel> <Computer>DEVELOP4.CONTOSO.COM</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="AlertDesc">10</Data> <Data Name="ErrorState">1203</Data> </EventData> </Event> Additonal information: The process that is generating the error is lsass.exe OS: Windows7 Professional x64 Joined to Domain: Yes I was able to access the shares locally in the past I am having the same issue on 3 other computers that have similar configurations Any help would be greatly appreciated, because I have no idea what's wrong. Thanks!

    Read the article

  • big cpu load on vmware server / linux

    - by dezfafara
    Hi, I currently using a server 2.x hosting 4 virtual machines on a linux system Today, on my physical server, I saw an enormous load average: this is the "top" of the server, illustrating my 4 virtual guests. top - 11:02:02 up 194 days, 23:09, 5 users, load average: 18.78, 12.05, 13.55 Tasks: 113 total, 4 running, 109 sleeping, 0 stopped, 0 zombie Cpu0 : 71.6%us, 19.0%sy, 0.0%ni, 8.8%id, 0.0%wa, 0.3%hi, 0.3%si, 0.0%st Cpu1 : 74.3%us, 10.4%sy, 0.0%ni, 15.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 72.5%us, 17.6%sy, 0.0%ni, 9.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 79.5%us, 4.6%sy, 0.0%ni, 16.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8178884k total, 8129980k used, 48904k free, 134904k buffers Swap: 10490436k total, 148k used, 10490288k free, 6129728k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7312 root 6 -10 1149m 921m 559m R 97 11.5 107947:09 vmware-vmx 6995 root 6 -10 779m 687m 317m R 92 8.6 107374:31 vmware-vmx 6693 root 6 -10 880m 659m 409m S 85 8.3 76947:33 vmware-vmx 12937 root 6 -10 960m 719m 523m S 75 9.0 67219:49 vmware-vmx In bold are the cpu usage for my 4 virtuals guests These guests are running on a linux system, and the appropriate process are usually 5% - 15% of cpu I don't understang why , since a few days I have this big problem. This is the "top" on a virtual guest which is at 95% of cpu load top - 11:23:15 up 194 days, 23:13, 4 users, load average: 0.25, 0.47, 0.59 Tasks: 92 total, 2 running, 90 sleeping, 0 stopped, 0 zombie Cpu(s): 1.4%us, 7.7%sy, 0.0%ni, 90.5%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 382296k total, 369732k used, 12564k free, 145156k buffers Swap: 979924k total, 13956k used, 965968k free, 86988k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3691 root 20 0 23948 1148 960 S 13.0 0.3 15339:23 vmware-guestd 3840 root 20 0 19880 584 512 S 7.7 0.2 1729:17 hald-addon-stor This virtual guest state is ok ... If anyone has any ideas .. Thanks

    Read the article

  • Mac mini simple customized, Mac mini server or other?

    - by microspino
    I'm in front of a big IT choice for my little office and I need some advice. We have 5 users, 1 super user, 1 HP500 DesignJet Plotter, other 4 laser printers, 1 HP Fax/Print/Scan/Copy machine. All the clients are XP Sp3 boxes. We would like to: centralize and share 90Gb of files using a Dropbox (this way we will have LAN sync of local working directories + internet backup + access our files wherever we are). centralize our plotter, printers and fax machine backup all the workstations share outlook calendar and tasks run 24x7 saving some energy Of course this setup It's just the first step to a more serious and creative network management of our office, so we are open to new ideas. The budget vary from 400€ to 900€, we are not tech gurus but at least one of us is a power user close to become a geek. I've read some articles on macminicolo about a mac mini either normal or with snow leopard server. I heard about Windows Home Server too on the lifehacker website but I'm in a sort of analysis - paralysis can You help me?

    Read the article

  • Un-install network printer drivers from Win7 64 Home Premium

    - by AkkA
    I recently bought a NAS device that has print server functionality through USB. The printer was already installed and fully working on another Win XP box, set up that box to see the printer over the network and it prints fine. I tried to install the printer on my Win7 laptop (64 bit, Home Premium), but got the wrong drivers somehow, or it just refuses to work. I need to completely un-install the printer drivers and start from scratch. Removing the printer (by going to the printers folder, right click and remove) does not actually un-install the drivers. It only removes the printer from active use. Even if I try to re-install new drivers it will load the old ones. I have read a few things on the net that say to load up a device snap-in or something of the sort into Computer Management, but this seems to be valid for Win7 Pro or greater, the function everyone tells you to use isnt available in Home Premium. Is there anything I can use to manage device driver files in Home Premium? I want to completely remove them from the computer.

    Read the article

  • error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7]

    - by brazorf
    This error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] error is happening after i changed router. Actually, i found out that this error just happens on a ctrl+c signal, so it could be not representative about the error itself. The command i run is very basic: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory Basically, the rsync just stuck there and nothing's happening, until i ctrl+c. After interrupting the process i got the error in subject. I past the whole thing here: rsync -avvvvz --delete /source/path/ username@host:/path/to/direectory cmd=<NULL> machine=HOSTNAME user=username path=/path/to/direectory cmd[0]=ssh cmd[1]=-l cmd[2]=username cmd[3]=HOSTNAME cmd[4]=rsync cmd[5]=--server cmd[6]=-vvvvlogDtprze.iLsf cmd[7]=--delete cmd[8]=. cmd[9]=/path/to/direectory opening connection using: ssh -l username HOSTNAME rsync --server -vvvvlogDtprze.iLsf --delete . /path/to/direectory note: iconv_open("UTF-8", "UTF-8") succeeded. ^C[sender] _exit_cleanup(code=20, file=rsync.c, line=541): entered rsync error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] [sender] _exit_cleanup(code=20, file=rsync.c, line=541): about to call exit(130) The authentication runs on ssh via rsa key. I tried basic troubleshoot such as: ping the remote host ssh -l username remote.host check software firewall logs i asked the remote host sysadmin to check for logs, and when i run that command a ssh connection is actually being established and i can state there is no comunication/authentication/name resolution issue here. Rolling back to old router make this work again. Both client and server are running ubuntu 10.04. Try to take a look at my router configuration, where i'm no experienced at all, but i didnt see any "suspect" (what i was looking for is firewall blocking something) setting. The router itself is DLINK DVA-G3670B. Any suggestion? Thank You F.

    Read the article

  • Cisco Access switch is dropping large amount of end points

    - by user135458
    This afternoon, with no changes to the network, a switch suddenly started dropping off lots of connections. These connections would come back up a few minutes later, then another area connected to the switch would drop off. This is an older 4006 chassis switch which could in and of itself be a problem but I'm looking to see what else you all would look for in trying to find a root cause. Switch is connected via ports 1/1 and 1/2 in an etherchannel to a VSS core 1/1/42 and 2/1/42. Both sides are up and working however the CPU on the switch will spike up to 99% and that's when CRC errors start to hit the VSS core on one of those interfaces and end points start dropping off. We tried new transceivers and SFP's on each side of the link, same result. When we tried swapping the fiber patch cables on the access switch the CRC errors did not follow the fiber cables they stayed with port 1/2 on the access switch. So port 1/2 on the supervisor module looks like the culprit. We actually tried to create a new member of the ethernet channel by taking a fiber media converter to cat5 and make that a member of the port-channel but when we plugged it in you couldn't even reach the switch. I'm guessing that's unrelated and a problem with the media converter. As of right now we have left it in a state of only one fiber cable running to one side of the VSS core (1/1 Access Switch -- 2/1/42). I've sent some info into TAC and they are looking into the situation but does anyone else have any commands I could run or some troubleshooting I could look into in the meantime?

    Read the article

  • Malicious content on server - next steps advice [closed]

    - by Under435
    Possible Duplicate: My server's been hacked EMERGENCY I just got an e-mail from my hosting company that they got a report of malicious content being hosted on my vps. I was unaware of this and started looking into it. I discovered a file called /var/www/mysite.com/osc.htm. Soon after I discovered some weird php files wp-includes.php and ndlist.php both recognized as being PHP/WebShell.A.1 virus. I removed all these files but I'm unsure of what to do next. Can anyone help me analyze the output below of sudo netstat -A inet -p -e and give advice on what's best to do next. Thanks very much in advance Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 localhost.localdo:mysql localhost.localdo:37495 TIME_WAIT root 0 - tcp 0 1 mysite.com:50524 xnacreators.net:smtp SYN_SENT Debian-exim 69746 25848/exim4 tcp 0 0 mysite.com:www tha165.thehealtha:37065 TIME_WAIT root 0 - tcp 0 0 localhost.localdo:37494 localhost.localdo:mysql TIME_WAIT root 0 - udp 0 0 mysite.com:59447 merlin.ensma.fr:ntp ESTABLISHED ntpd 3769 2522/ntpd udp 0 0 mysite.com:36432 beast.syus.org:ntp ESTABLISHED ntpd 4357 2523/ntpd udp 0 0 mysite.com:48212 formularfetischiste:ntp ESTABLISHED ntpd 3768 2522/ntpd udp 0 0 mysite.com:46690 formularfetischiste:ntp ESTABLISHED ntpd 4354 2523/ntpd udp 0 0 mysite.com:35009 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 4356 2523/ntpd udp 0 0 mysite.com:58702 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 3770 2522/ntpd udp 0 0 mysite.com:49583 merlin.ensma.fr:ntp ESTABLISHED ntpd 4355 2523/ntpd udp 0 0 mysite.com:56290 beast.syus.org:ntp ESTABLISHED ntpd 3771 2522/ntpd

    Read the article

  • Manipulating IIS7 Configuration with Powershell

    - by John Price
    I'm trying to script some IIS7 setup tasks in PowerShell using the WebAdministration module. I'm good with setting simple properties, but am having some trouble when it comes to dealing with collections of elements in the config files. As an immediate, example, I want to have application pools recycle on a given schedule, and the schedule is a collection of times. When I set this up via the IIS management console, the relevant config section looks like this: <add name="CVSupportAppPool"> <recycling> <periodicRestart memory="1024" time="00:00:00"> <schedule> <clear /> <add value="03:31:00" /> </schedule> </periodicRestart> </recycling> </add> In my script I would like to be able to accomplish the same thing, and I have the following two lines: #clear any pre-existing schedule Clear-WebConfiguration "/system.applicationHost/applicationPools/add[@name='$($appPool.Name)']/recycling/periodicRestart/schedule" #add the new schedule Add-WebConfiguration "/system.applicationHost/applicationPools/add[@name='$($appPool.Name)']/recycling/periodicRestart/schedule" -value (New-TimeSpan -h 3 -m 31) That does almost the same thing, but the resulting XML lacks the <clear/> element that is created with via the GUI, which I believe is necessary to avoid inheriting any default values. This sort of collection (with "add", "remove", and "clear" elements) seems to be fairly standard in the config files, but I can't seem to find any good documentation on how to interact with them consistently.

    Read the article

  • Tools to manage sql 2008 database mirroring?

    - by lemkepf
    We are going to be moving about 20 databases that live on a single instance of sql 2000 to a sql 2008 r2 environment with database mirroring. What I'm looking for is a tool or scripts that will help me manage the conversion and management of those 20db's onto this new mirrored environment easily. There are many steps in setting each DB up and I want to automate as much as possible. Edit: Here are the steps I've been doing manually: Create the same username/passwords from the old sql 2000 server onto new sql 2008 server. Then sync those users/passwords onto the other sql 2008 server with the same SSID's so when we do the db backup and restore they match up. Take a backup of each sql 2000 db's. Copy them to server A. Restore the backup to server A. Backup from server a, copy to server b, restore there. Run the mirror "configure security" wizard. Start mirroring. I've love to be able to script this out or have a tool that does it for me. Thanks! Paul

    Read the article

  • External SATA drive does not work without the optional USB cable *also* connected

    - by Software Monkey
    I have Vantec NST-260SU external eSATA/USB drive enclosure (which came with an optional separate power supply) connected to a relatively new Windows 7 computer. The drive should work as a SATA drive with either the separate power supply or using a USB cable solely for power. I would prefer to use the external power supply because I have used all my rear USB ports. Now, if I connect both the eSATA and USB cable, then: The drive shows in the BIOS list of AHCI drives (and not in the list of attached USB devices). Everything I can see about it in Computer Management seems to show it as a SATA driver (for example, it shows as "Location 0 (Channel 5, Target 0, Lun 0)" like my other SATA drives (and not "on USB Mass Storage Device" like my USB flash-drives). It seems very fast, very much faster than my USB flash drives. However, if I disconnect the USB cable and attach the power adapter instead, the drive does not show in the BIOS list and cannot be seen by Windows. The power LED on the enclosure is lit, and the drive enclosure becomes warm after running for a bit, so I am sure it is receiving power. Does anyone know if this device requires both the USB and eSATA cable, and if so, why? Or is there possibly something I need to do to reset the enclosure to not need the USB - the install instructions are pretty clear that you must connect the SATA cable before connecting the USB cable in order for the drive to function as SATA, which I am sure I did. PS: I have reviewed the small manual which came with it, which has not been of help.

    Read the article

  • Preventing h/w RAID cards from dropping slow JBOD disks

    - by Kevin
    I'm considering buying a used SAS h/w RAID card for externally attaching HDDs to an HP ProLiant I'm setting up. However, I only require RAID functionality on some of the drives. Theoretically it should be simple to JBOD the other drives, but some of them are inexpensive SATA disks and probably cannot have TLER disabled. I'd like to know, prior to actually ordering a RAID card, whether typically RAID cards would still enforce dropping of disks that do not respond within a few seconds, even if the disk is in a JBOD, and whether there is any way to disable this. Ideally it would be nice to be able to select certain SAS ports that will be pass-through, bypassing the RAID engine entirely and just acting as an HBA for those ports. I know I could buy a separate SAS HBA but that seems like a waste of $ and is also impractical as it's a 1U server so space is extremely limited. My question then is whether the functionality I'm looking for (pass-through on certain ports or at least JBOD drives not getting themselves dropped due to slow response) is typical of proper h/w RAID cards such as PERC 5/E etc. I've browsed through the latter's manual but unfortunately, as with most user manuals, it states the obvious and doesn't state the unobvious. Thanks for any info, Kevin

    Read the article

  • PowerShell 3.0 x64 bit broken after installing KB2506143

    - by Dave Parker
    I have searched using all kinds of variations on relevant terms and I cannot find a single other instance of someone else having this excact same problem, so I am hoping someone here may have a clue. Problem I installed Windows Management Framework 3.0 (KB2506143) by downloading and running Windows6.1-KB2506143-x64.msu from Microsoft.com. Once completed I rebooted my machine as requested. After rebooting and logging in, I try to run the 64-bit PowerShell command shell and it comes up for a second then goes away. The 32-bit shell seems to work fine, it is just the 64-bit one that fails. Looking in the Fusion logs, I found: *** Assembly Binder Log Entry (10/4/2012 @ 1:51:48 PM) *** The operation failed. Bind result: hr = 0x80070002. The system cannot find the file specified. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll Running under executable C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = ********\***** LOG: DisplayName = Microsoft.PowerShell.ConsoleHost, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL <remainder omitted> GacUtil reveals that there is a Microsoft.PowerShell.ConsoleHost, Version=1.0.0.0, but not 3.0.0.0. I tried uninstalling KB2506143 (which removed MSVCRT90.dll and caused Windows Live Messenger to fail on load after rebooting again, so I ran a repair in stall on Windows Live Essentials and that fixed the Messenger problem) and then re-installing it, but nothing changed. If it helps, here are what I think may be the relevant parts of my hardware/software environment. Environment Dell Latitude E6510, 8GB RAM Windows 7 Professional 64-bit with SP1 Visual Studio 2010 Professional installed (includes .NET 4.0) Visual Studio 2012 Professional installed Microsoft Forefront Client Security Any clues out there? Thanks, Dave

    Read the article

< Previous Page | 698 699 700 701 702 703 704 705 706 707 708 709  | Next Page >