Search Results

Search found 19525 results on 781 pages for 'say'.

Page 704/781 | < Previous Page | 700 701 702 703 704 705 706 707 708 709 710 711  | Next Page >

• IIS not starting: The process cannot access the file because it is being used by another process

  - by Rick Strahl

  Ok, apparently a few people knew about this issue, but it is new to me and has caused me nearly an hour to track down today. What happened is that I’ve been working all day doing some final pre-deployment testing of several tools on my local dev machine. In the process I’ve been starting and stopping several IIS 7 Web sites. At some point I was done and just wanted to start my Default Web Site again and found this  little gem of an error message popping up: The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020) A lot of headless running around ensued after this, trying to figure out why IIS wouldn’t start. Oddly some sites started right up, others didn’t. I killed INetInfo, all worker processes, tried IISReset a million times and even rebooted – all to no avail. What gives? Skype, you evil Bastard! As it turns out the culprit is – drum roll please - Skype!  What, you may ask, does Skype have to do with IIS and Web Requests? It looks like recent versions of Skype have an option to run over Port 80 and 443 to allow running over corporate firewalls. Which is actually a nice feature that lets Skype work just about anywhere. What’s not so cool is that IIS fails to start up when another application is already using the same port that a Web site is mapped to. In the case of my dev site that’d be port 80 and Skype was hogging it. To fix this issue you can stop Skype from using port 80 and 443 which quickly fixes the problem. Or stop Skype. Duh! To permanently fix the problem in Skype find the option on the Options | Connection tab and uncheck the Use port 80/443 option: Oddly I haven’t run into this problem even though my setup hasn’t changed in quite some time. It appears that it’s bad startup timing that causes this problem to occur. Whatever the circumstance was, Skype somehow ended up starting before IIS.  If Skype is started after IIS has started it will automatically opt for other ports and not use port 80 and so there’s no problem. It’s easy to demonstrate this behavior if you’re looking for it: Stop IIS Stop Skype Start Skype and make a test call Start IIS And voila your error is ready for you! This really shouldn’t be a problem except that it would be really nice if IIS could give a more helpful error message when it can fire up a site because a port is blocked. “The process cannot access a file” is really not a very helpful error message in this scenario… I/O port / file ah what the heck it’s all the same to Windows. Right! I’ve run into this situation quite a bit with other, albeit more obvious applications like running Apache on the local machine for testing and then trying to run an IIS application. Same situation,  although it’s been a while – pre IIS 7 and I think previous versions of IIS actually gave more useful error messages for port blockages and that would be helpful. On the way to figuring this out I ran into some pretty humorous forum posts though with people ragging on why the hell you would be running IIS. Or Skype. The misinformed paranoia police out in full force so to say :-). It’ll be nice to start running IIS Express once Visual Studio 2010 SP1 gets released. Anyway, no surprise that Skype didn’t jump out at me as the culprit right away and I was left fumbling for a while until the Internet came to the rescue. I’m not the first to have found this for sure – I posted a message on Twitter and dozens of people replied they’d run into this before as well. Seems worth mentioning again though – since I’m sure to forget that this happened in a year from now when I hit that same error. Maybe I’ll even find this blog post to remind me…© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7  Windows  

  Read the article

• Thoughts on Thoughts on TDD

  Brian Harry wrote a post entitled Thoughts on TDD that I thought I was going to let lie, but I find that I need to write a response. I find myself in agreement with Brian on many points in the post, but I disagree with his conclusion. Not surprisingly, I agree with the things that he likes about TDD. Focusing on the usage rather than the implementation is really important, and this is important whether you use TDD or not. And YAGNI was a big theme in my Seven Deadly Sins of Programming series. Now, on to what he doesnt like. He says that he finds it inefficient to have tests that he has to change every time he refactors. Here is where we part company. If you are having to do a lot of test rewriting (say, more than a couple of minutes work to get back to green) *often* when you are refactoring your code, I submit that either you are testing things that you dont need to test (internal details rather than external implementation), your code perhaps isnt as decoupled as it could be, or maybe you need a visit to refactorers anonymous. I also like to refactor like crazy, but as we all know, the huge downside of refactoring is that we often break things. Important things. Subtle things. Which makes refactoring risky. *Unless* we have a set of tests that have great coverage. And TDD (or Example-based Design, which I prefer as a term) gives those to us. Now, I dont know what sort of coverage Brian gets with the unit tests that he writes, but I do know that for the majority of the developers Ive worked with and I count myself in that bucket the coverage of unit tests written afterwards is considerably inferior to the coverage of unit tests that come from TDD. For me, it all comes down to the answer to the following question: How do you ensure that your code works now and will continue to work in the future? Im willing to put up with a little efficiency on the front side to get that benefit later. Its not the writing of the code thats the expensive part, its everything else that comes after. I dont think that stepping through test cases in the debugger gets you what you want. You can verify what the current behavior is, sure, and do it fairly cheaply, but you dont help the guy in the future who doesnt know what conditions were important if he has to change your code. His second part that he doesnt like backing into an architecture (go read to see what he means). Ive certainly had to work with code that was like this before, and its a nightmare the code that nobody wants to touch. But thats not at all the kind of code that you get with TDD, because if youre doing it right youre doing the write a failing tests, make it pass, refactor approach. Now, you may miss some useful refactorings and generalizations for this, but if you do, you can refactor later because you have the tests that make it safe to do so, and your code tends to be easy to refactor because the same things that make code easy to write unit tests for make it easy to refactor. I also think Brian is missing an important point. We arent all as smart as he is. Im reminded a bit of the lesson of Intentional Programming, Charles Simonyis paradigm for making programming easier. I played around with Intentional Programming when it was young, and came to the conclusion that it was a pretty good thing if you were as smart as Simonyi is, but it was pretty much a disaster if you were an average developer. In this case, TDD gives you a way to work your way into a good, flexible, and functional architecture when you dont have somebody of Brians talents to help you out. And thats a good thing.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• WebGrid Helper and Complex Types

  - by imran_ku07

      Introduction:           WebGrid helper makes it very easy to show tabular data. It was originally designed for ASP.NET Web Pages(WebMatrix) to display, edit, page and sort tabular data but you can also use this helper in ASP.NET Web Forms and ASP.NET MVC. When using this helper, sometimes you may run into a problem if you use complex types in this helper. In this article, I will show you how you can use complex types in WebGrid helper.       Description:             Let's say you need to show the employee data and you have the following classes,   public class Employee { public string Name { get; set; } public Address Address { get; set; } public List<string> ContactNumbers { get; set; } } public class Address { public string City { get; set; } }               The Employee class contain a Name, an Address and list of ContactNumbers. You may think that you can easily show City in WebGrid using Address.City, but no. The WebGrid helper will throw an exception at runtime if any Address property is null in the Employee list. Also, you cannot directly show ContactNumbers property. The easiest way to show these properties is to add some additional properties,   public Address NotNullableAddress { get { return Address ?? new Address(); } } public string Contacts { get { return string.Join("; ",ContactNumbers); } }               Now you can easily use these properties in WebGrid. Here is the complete code of this example,  @functions{ public class Employee { public Employee(){ ContactNumbers = new List<string>(); } public string Name { get; set; } public Address Address { get; set; } public List<string> ContactNumbers { get; set; } public Address NotNullableAddress { get { return Address ?? new Address(); } } public string Contacts { get { return string.Join("; ",ContactNumbers); } } } public class Address { public string City { get; set; } } } @{ var myClasses = new List<Employee>{ new Employee { Name="A" , Address = new Address{ City="AA" }, ContactNumbers = new List<string>{"021-216452","9231425651"}}, new Employee { Name="C" , Address = new Address{ City="CC" }}, new Employee { Name="D" , ContactNumbers = new List<string>{"045-14512125","21531212121"}} }; var grid = new WebGrid(source: myClasses); } @grid.GetHtml(columns: grid.Columns( grid.Column("NotNullableAddress.City", header: "City"), grid.Column("Name"), grid.Column("Contacts")))                    Summary:           You can use WebGrid helper to show tabular data in ASP.NET MVC, ASP.NET Web Forms and  ASP.NET Web Pages. Using this helper, you can also show complex types in the grid. In this article, I showed you how you use complex types with WebGrid helper. Hopefully you will enjoy this article too.  

  Read the article

• Low level programming - what's in it for me?

  - by back2dos

  For years I have considered digging into what I consider "low level" languages. For me this means C and assembly. However I had no time for this yet, nor has it EVER been neccessary. Now because I don't see any neccessity arising, I feel like I should either just schedule some point in time when I will study the subject or drop the plan forever. My Position For the past 4 years I have focused on "web technologies", which may change, and I am an application developer, which is unlikely to change. In application development, I think usability is the most important thing. You write applications to be "consumed" by users. The more usable those applications are, the more value you have produced. In order to achieve good usability, I believe the following things are viable Good design: Well-thought-out features accessible through a well-thought-out user interface. Correctness: The best design isn't worth anything, if not implemented correctly. Flexibility: An application A should constantly evolve, so that its users need not switch to a different application B, that has new features, that A could implement. Applications addressing the same problem should not differ in features but in philosophy. Performance: Performance contributes to a good user experience. An application is ideally always responsive and performs its tasks reasonably fast (based on their frequency). The value of performance optimization beyond the point where it is noticeable by the user is questionable. I think low level programming is not going to help me with that, except for performance. But writing a whole app in a low level language for the sake of performance is premature optimization to me. My Question What could low level programming teach me, what other languages wouldn't teach me? Am I missing something, or is it just a skill, that is of very little use for application development? Please understand, that I am not questioning the value of C and assembly. It's just that in my everyday life, I am quite happy that all the intricacies of that world are abstracted away and managed for me (mostly by layers written in C/C++ and assembly themselves). I just don't see any concepts, that could be new to me, only details I would have to stuff my head with. So what's in it for me? My Conclusion Thanks to everyone for their answers. I must say, nobody really surprised me, but at least now I am quite sure I will drop this area of interest until any need for it arises. To my understanding, writing assembly these days for processors as they are in use in today's CPUs is not only unneccesarily complicated, but risks to result in poorer runtime performance than a C counterpart. Optimizing by hand is nearly impossible due to OOE, while you do not get all kinds of optimizations a compiler can do automatically. Also, the code is either portable, because it uses a small subset of available commands, or it is optimized, but then it probably works on one architecture only. Writing C is not nearly as neccessary anymore, as it was in the past. If I were to write an application in C, I would just as much use tested and established libraries and frameworks, that would spare me implementing string copy routines, sorting algorithms and other kind of stuff serving as exercise at university. My own code would execute faster at the cost of type safety. I am neither keen on reeinventing the wheel in the course of normal app development, nor trying to debug by looking at core dumps :D I am currently experimenting with languages and interpreters, so if there is anything I would like to publish, I suppose I'd port a working concept to C, although C++ might just as well do the trick. Again, thanks to everyone for your answers and your insight.

  Read the article

• Visual Studio Little Wonders: Quick Launch / Quick Access

  - by James Michael Hare

  Once again, in this series of posts I look at features of Visual Studio that may seem trivial, but can help improve your efficiency as a developer. The index of all my past little wonders posts can be found here. Well, my friends, this post will be a bit short because I’m in the middle of a bit of a move at the moment.  But, that said, I didn’t want to let the blog go completely silent this week, so I decided to add another Little Wonder to the list for the Visual Studio IDE. How often have you wanted to change an option or execute a command in Visual Studio, but can’t remember where the darn thing is in the menu, settings, etc.?  If so, Quick Launch in VS2012 (or Quick Access in VS2010 with the Productivity Power Tools extension) is just for you! Quick Launch / Quick Access – find a command or option quickly For those of you using Visual Studio 2012, Quick Launch is built right into the IDE at the top of the title bar, near the minimize, maximize, and close buttons: But do not despair if you are using Visual Studio 2010, you can get Quick Access from the Productivity Power Tools extension.  To do this, you can go to the extension manager: And then go to the gallery and search for Productivity Power Tools and install it.  If you don’t have VS2012 yet, then the Productivity Power Tools is the next best thing.  This extension updates VS2010 with features such as Quick Access, the Solution Navigator, searchable Add Reference Dialog, better tab wells, etc.  I highly recommend it! But back to the topic at hand!  In VS2012 Quick Launch is built into the IDE and can be accessed by clicking in the Quick Launch area of the title bar, or by pressing CTRL+Q.  If you have VS2010 with the PPT installed, though, it is called Quick Access and is accessible through View –> Quick Access: Regardless of which IDE you are using, the feature behaves mostly the same.  It allows you to search all of Visual Studio’s commands and options for a particular topic.  For example, let’s say you want to change from tabs to tabs expanded to spaces, but don’t remember where that option is buried.  You can bring up Quick Launch / Quick Access and type in “tabs”: And it brings up a list of all options on tabs, you can then choose the one appropriate to you and click on it and it will take you right there! A lot easier than diving through the options tree to find what you are looking for!  It also works on menu commands, for example if you can’t remember how to open the Output window: It shows you the menu items that will get you to the Output window, and (if applicable) the keyboard shortcuts.  Again, clicking on one of these will perform the action for you as well. There are also some tasks you can perform directly from Quick Launch / Quick Access.  For example, perhaps you are one of those people who like to have the line numbers in your editor (I do), so let’s bring up Quick Launch / Quick Access and type “line numbers”: And let’s select Turn Line Numbers On, and now our editor looks like: And Voila!  We have line numbers in VS2010.  You can do this in VS2012 too, but it takes you to the option settings instead of directly turning them off and on.  There are bound to be differences between the way the two editors organize settings and commands, but you get the point. So, as you can see, the Quick Launch / Quick Access feature in Visual Studio makes it easy to jump right to the options, commands, or tasks you are interested in without all the digging. Summary An IDE as powerful as Visual Studio has so many options and commands that it can be confusing to remember how to find and invoke them.  Quick Launch (Quick Access in VS2010 with Productivity Power Tools extension) is a quick and handy way to jump to any of these options, commands, or tasks quickly without having to remember in what menu or screen they are buried!  Technorati Tags: C#,CSharp,.NET,Little Wonders,Visual Studio,Quick Access,Quick Launch

  Read the article

• regarding the Windows Phone 7 series, XNA and Visual Basic

  - by Chris Williams

  as long as we're talking about VB... I figured I would share this as well. Hi everyone, I'm about to express a sentiment that might ruffle a few feathers, but I think most of you know me well enough to know I love like accept VB for what it is and that what I'm about to say is with good intentions. (The rest of you, who don't know me, please take my word for it.) The world is full of VB developers, I was one of them for a long time. I think it's safe to assume that none of us are ignorant people who require handholding. We're working professionals, making a living by using our skills as developers. I'm also willing to bet that quite a few of us are fluent in C# as well as VB. It may not be your preferred language, but many of you can do it and you prove that nearly every day. Honestly, I don't know ANY developers or consultants that have only known ONE language ever. So it pains me greatly when I see the word "CAN'T" being tossed around like a crutch... as in "we CAN'T develop for the windows phone or we CAN'T develop XNA games." At MIX, Microsoft hath decreed that C# is the language of choice for developing for the Windows Phone 7. I think it's a safe bet that you won't see VB support if it isn't there already. (Just like XNA... which is up to version 4.0 by now.)  So what? (Yeah... I said it.) I think everyone here can agree that actual coding is only one part of software design and development. There is nothing stopping ANY of you from beginning the process of designing your killer phone app, writing up specs, requirements, doing UI design, workflow, mockups, storyboards, art, etc.... None of these things are language dependent. IF by the time you've got that stuff out of the way, and there's still no VB support, then start doing some rapid prototyping of your app in C# (I know, I know... heresy!)  You still have to spend time learning how the phone does things, what UI tricks do what, what paradigms make sense, how to use to accelerometer and the tilt and the multitouch functionality. I can guarantee you that time spent doing this is a great investment, no matter WHAT extension your code files have. Eventually, you may have a working prototype. IF by this time, there's STILL no VB support... fret not, you've made significant progress on your app. You've designed it, prototyped it, figured out how to use the phone specific features... so you might as well finish it and pat yourself on the back for learning something new... and possibly being first to market with your new app. I'll be happy to argue any and all of these points online or off with anyone who cares to do so, but there is one undeniable point that you simply can't argue:  Your potential customers do not care AT ALL what programming language you used to write the app they are about to purchase. They care that it works. If your biggest concern is being first to market, than stop complaining and get busy because you're running out of time and the 3000+ people who were at MIX certainly aren't waiting for you. They've already started working on their apps.

  Read the article

• Praise for Europe's Smart Metering & Conservation Efforts

  - by caroline.yu

  Recently, a writer at the Home Energy Team praised the UK for its efforts towards smart metering and energy conservation, with an article entitled UK Blazing A Trail With Smart Metering At Home? The article highlighted that the Department of Energy and Climate Change has announced that smart metering will be introduced in the next decade and that all UK households will have smart meters by the year 2020. In fact, the UK is not the only country striving to achieve carbon reduction targets, as many of its European counterparts have begun to take positive steps towards tackling the issue of energy conservation by implementing innovative new metering and billing technologies as well as promoting alternative energy solutions, such as wind and solar power. Since 1997, the states of the European Union, including France, Germany and Spain, have been working towards achieving a target of 12 percent renewable energy electricity by 2010. Germany in particular has made a significant achievement so far, having surpassed the target early in 2007. This success is largely due to the German Renewable Energy Act (EEG), which promoted the use of renewable energy. Recently, analysis from the European Wind Energy Association (EWEA) found that 21 of the EU Member States are meeting or exceeding their national target to achieve 20 percent renewable energy by 2020. However, six states - Belgium, Italy, Luxembourg, Malta, Bulgaria and Denmark - say they will not manage to reach their target through domestic action alone. Bulgaria and Denmark believe that with fresh national initiatives they could meet or exceed their targets, but others, including Italy, may need to import renewable energy from neighboring non-EU countries. Top achievers, according to the EWEA report, are Spain, which believes its renewable energy will reach 22.7 percent by 2020, as well as Germany, Estonia, Greece, Ireland, Poland, Slovakia and Sweden, who will all exceed their targets. "Importantly, the way that this renewable energy is controlled and distributed must be addressed in order to ensure its success," said Bastian Fischer, vice president and general manager EMEA, Oracle Utilities. "A smart gird infrastructure can enable utilities to deal with load distribution in times of increased need and ensure power is always available from these means. A smart grid also underpins the success of metering and billing technologies, such as smart metering, and allows utilities to deal with increased usage data and provide accurate billing." Outside of Europe, Australia has made significant steps towards improving water conservation. The Australian Department of Sustainability and Environment took some of the recent advancements made in the energy sector, including new metering and billing solutions, and applied them to the water industry, enhancing customer service and reducing consumption as a result. The adoption of smart metering in Europe is mainly driven by regulation, but significant technological improvements are being made the world over to change the way we use all kinds of energy. However, the developing markets are lagging behind. One of the primary reasons for this is the lack of infrastructure in place to use as a foundation for setting up energy-saving solutions, which is slowing the adoption of technologies such as smart meters. However, these countries do benefit from fewer outdated infrastructure and legacy systems, which is often cited by others as a difficult barrier to deploying new solutions. As a result, some countries should find new technologies easier to implement and adapt to in the immediate future, without this roadblock.

  Read the article

• How do you educate your teammates without seeming condescending or superior?

  - by Dan Tao

  I work with three other guys; I'll call them Adam, Brian, and Chris. Adam and Brian are bright guys. Give them a problem; they will figure out a way to solve it. When it comes to OOP, though, they know very little about it and aren't particularly interested in learning. Pure procedural code is their MO. Chris, on the other hand, is an OOP guy all the way -- and a cocky, condescending one at that. He is constantly criticizing the work Adam and Brian do and talking to me as if I must share his disdain for the two of them. When I say that Adam and Brian aren't interested in learning about OOP, I suspect Chris is the primary reason. This hasn't bothered me too much for the most part, but there have been times when, looking at some code Adam or Brian wrote, it has pained me to think about how a problem could have been solved so simply using inheritance or some other OOP concept instead of the unmaintainable mess of 1,000 lines of code that ended up being written instead. And now that the company is starting a rather ambitious new project, with Adam assigned to the task of getting the core functionality in place, I fear the result. Really, I just want to help these guys out. But I know that if I come across as just another holier-than-thou developer like Chris, it's going to be massively counterproductive. I've considered: Team code reviews -- everybody reviews everybody's code. This way no one person is really in a position to look down on anyone else; besides, I know I could learn plenty from the other members on the team as well. But this would be time-consuming, and with such a small team, I have trouble picturing it gaining much traction as a team practice. Periodic e-mails to the team -- this would entail me sending out an e-mail every now and then discussing some concept that, based on my observation, at least one team member would benefit from learning about. The downside to this approach is I do think it could easily make me come across as a self-appointed expert. Keeping a blog -- I already do this, actually; but so far my blog has been more about esoteric little programming tidbits than straightforward practical advice. And anyway, I suspect it would get old pretty fast if I were constantly telling my coworkers, "Hey guys, remember to check out my new blog post!" This question doesn't need to be specifically about OOP or any particular programming paradigm or technology. I just want to know: how have you found success in teaching new concepts to your coworkers without seeming like a condescending know-it-all? It's pretty clear to me there isn't going to be a sure-fire answer, but any helpful advice (including methods that have worked as well as those that have proved ineffective or even backfired) would be greatly appreciated. UPDATE: I am not the Team Lead on this team. Chris is. UPDATE 2: Made community wiki to accord with the general sentiment of the community (fancy that).

  Read the article

• Welcome to the Oracle Retail International Blog

  - by sarah.taylor(at)oracle.com

  Welcome to the first post of the new Oracle Retail International Blog. Retail is an international business and today's successful retailers view themselves in the context of a global market. A niche fashion business in Tokyo will learn marketing strategies from the luxury brands of Milan, an independent grocer in Oslo will source the same global brands as a supermarket in Oklahoma, and every retailer in the world will measure their multi-channel operation against the international e-commerce giant Amazon.  Why? Because today's customer is a global customer with unparalleled expectations on choice, price and service. Today's consumers have access to more information on retail than ever before. Technology allows people to shop from their home, their office or from the phone in their pocket, wherever they are and at whatever time suits them. Customers are using the web to search for products and promotions. They are also using the web to develop their voice in commenting on products and services that have delighted or disappointed. In an information rich industry, this customer element creates a new world of data. The best retailers are developing eagle eyes for reading customer activity and turning it into profitable decisions. Ultimately, whether you choose to compete or shop on price, service, product innovation, excellent operations or all of the above - the international world of retail has become an inspiration for all - retailer and consumer alike.  Retail as an industry is growing and diversifying at a faster rate than ever before. Yet it is still the customer who picks the winners and the losers on the retail field. Economic circumstances transform the rules, but it is still the customer who dictates the game, the pace, the price, and the perception of the brand. Wise retailers never rest on their laurels. They are always shopping for ideas on how to improve and differentiate the offer at every touch point to meet the customer's needs better than anyone else and to gain each customer's loyalty at a time when loyalty can be cheap. With this blog, I hope that we might provide a hub for discussion around what unifies retail and how technology supports both the retailer and customer experience. Despite the competitive nature of this market, we hope that this will provide an opportunity to share experiences and lessons learnt with a view that knowledge can only help this industry to grow and develop. At Oracle we've been supporting retailers for many years. Many of us have worked within retail organisations all over the world, myself included. With this in mind, I don't feel it is too bold a statement to say that Oracle understands retail. We wouldn't be so heavily integrated in some of the biggest and most well-known names in retail if we didn't. With this blog, we intend to create a community of international retailers that can exchange ideas and experiences, debate collective challenges and drive a better understanding of this continually evolving industry. Events such as the World Retail Congress and NRF's Big Show bring enormous value to the retail industry providing platforms for discussion and learning but they happen once a year. We wanted to create a platform for discussion on a different level and that like retail, is always on. We hope not only to bring commitment to being not only the infrastructure that brings all of their systems together within a retail business, but an infrastructure that supports the industry internationally to grow and flourish through creating a platform for networking, discussion, creativity, vision and strategy. Please feel free to ask questions or comment using the comments functionality.  You might also want to visit our other Oracle Retail social media sites: Facebook - http://www.facebook.com/oracleretail YouTube - http://www.youtube.com/user/oracleretail Twitter - http://twitter.com/#!/oracleretailInsight-Driven Retailing Blog - http://blogs.oracle.com/retail/

  Read the article

• The Latest News About SAP

  - by jmorourke

  Like many professionals, I get a lot of my news from Google e-mail alerts that I’ve set up to keep track of key industry trends and competitive news.  In the past few weeks, I’ve been getting a number of news alerts about SAP.  Below are a few recent examples: Warm weather cuts short US maple sugaring season – by Toby Talbot, AP MILWAUKEE – Temperatures in Wisconsin had already hit the high 60s when Gretchen Grape and her family began tapping their 850 maple trees. They had waited for the state's ceremonial tapping to kick off the maple sugaring season. It was moved up five days, but that didn't make much difference. For Grape, the typically month-long season ended nine days later. The SAP had stopped flowing in a record-setting heat wave, and the 5-quart collection bags that in a good year fill in a day were still half-empty. Instead of their usual 300 gallons of syrup, her family had about 40. Maple syrup producers across the North have had their season cut short by unusually warm weather. While those with expensive, modern vacuum systems say they've been able to suck a decent amount of sap from their trees, producers like Grape, who still rely on traditional taps and buckets, have seen their year ruined. "It's frustrating," said the 69-year-old retiree from Holcombe, Wis. "You put in the same amount of work, equipment, investment, and then all of a sudden, boom, you have no SAP." Home & Garden: Too-Early Spring Means Sugaring Woes  - by Georgeanne Davis for The Free Press Over this past weekend, forsythia and daffodils were blooming in the southern parts of the state as temperatures climbed to 85 degrees, and trees began budding out, putting an end to this year's maple syrup production even as the state celebrated Maine Maple Sunday. Maple sugaring needs cold nights and warm days to induce SAP flows. Once the trees begin budding, SAP can still flow, but the SAP is bitter and has an off taste. Many farmers and dairymen count on sugaring for extra income, so the abbreviated season is a real financial loss for them, akin to the shortened shrimping season's effect on Maine lobstermen. SAP season comes to a sugary Sunday finale – Kennebec Journal, March 26th, 2012 Rebecca Manthey stood out in the rain at the entrance of Old Fort Western keeping watch over a cast iron kettle of boiling SAP hooked to a tripod over a wood fire.  Manthey and the rest of the Old Fort Western staff -- decked out in 18th-century attire -- joined sugar houses across the state in observance of Maine Maple Sunday. The annual event is sponsored by the Department of Agriculture and the Maine Maple Producers Association.  She said the rain hadn't kept people from coming to enjoy all the events at the fort surrounding the production of Maple syrup.  "In the 18th century, you would be boiling SAP in the woods, so I would be in the woods," Manthey explained to the families who circled around her. "People spent weeks and weeks in the woods. You don't want to cook it to fast or it would burn. When it looks like the right consistency then you send it (into the kitchen) to be made into sugar." Manthey said she enjoyed portraying an 18th-century woman, even in the rain, which didn't seem to bother visitors either. There was a steady stream of families touring the fort and enjoying the maple syrup demonstrations. I hope you enjoy these updates on SAP – Happy April Fool’s Day!

  Read the article

• Problem with script substitution when running script

  - by tucaz

  Hi! I'm new to Linux so this probably should be an easy fix, but I cannot see it. I have a script downloaded from official sources that is used to install additional tools for fsharp but it gives me a syntax error when running it. I tried to replace ( and ) by { and } but eventually it lead me to another error so I think this is not the problem since the script works for everybody. I read some articles that say that my bash version maybe is not the right one. I'm using Ubuntu 10.10 and here is the error: install-bonus.sh: 28: Syntax error: "(" unexpected (expecting "}") And this is line 27, 28 and 29: { declare -a DIRS=("${!3}") FILE=$2 And the full script: #! /bin/sh -e PREFIX=/usr BIN=$PREFIX/bin MAN=$PREFIX/share/man/man1/ die() { echo "$1" &2 echo "Installation aborted." &2 exit 1 } echo "This script will install additional material for F# including" echo "man pages, fsharpc and fsharpi scripts and Gtk# support for F#" echo "Interactive (root access needed)" echo "" # ------------------------------------------------------------------------------ # Utility function that searches specified directories for a specified file # and if the file is not found, it asks user to provide a directory RESULT="" searchpaths() { declare -a DIRS=("${!3}") FILE=$2 DIR=${DIRS[0]} for TRYDIR in ${DIRS[@]} do if [ -f $TRYDIR/$FILE ] then DIR=$TRYDIR fi done while [ ! -f $DIR/$FILE ] do echo "File '$FILE' was not found in any of ${DIRS[@]}. Please enter $1 installation directory:" read DIR done RESULT=$DIR } # ------------------------------------------------------------------------------ # Locate F# installation directory - this is needed, because we want to # add environment variable with it, generate 'fsharpc' and 'fsharpi' and also # copy load-gtk.fsx to that directory # ------------------------------------------------------------------------------ PATHS=( $1 /usr/lib/fsharp /usr/lib/shared/fsharp ) searchpaths "F# installation" FSharp.Core.dll PATHS[@] FSHARPDIR=$RESULT echo "Successfully found F# installation directory." # ------------------------------------------------------------------------------ # Check that we have everything we need # ------------------------------------------------------------------------------ [ $(id -u) -eq 0 ] || die "Please run the script as root." which mono /dev/null || die "mono not found in PATH." # ------------------------------------------------------------------------------ # Make sure that all additional assemblies are in GAC # ------------------------------------------------------------------------------ echo "Installing additional F# assemblies to the GAC" gacutil -i $FSHARPDIR/FSharp.Build.dll gacutil -i $FSHARPDIR/FSharp.Compiler.dll gacutil -i $FSHARPDIR/FSharp.Compiler.Interactive.Settings.dll gacutil -i $FSHARPDIR/FSharp.Compiler.Server.Shared.dll # ------------------------------------------------------------------------------ # Install additional files # ------------------------------------------------------------------------------ # Install man pages echo "Installing additional F# commands, scripts and man pages" mkdir -p $MAN cp *.1 $MAN # Export the FSHARP_COMPILER_BIN environment variable if [[ ! "$OSTYPE" =~ "darwin" ]]; then echo "export FSHARP_COMPILER_BIN=$FSHARPDIR" fsharp.sh mv fsharp.sh /etc/profile.d/ fi # Generate 'load-gtk.fsx' script for F# Interactive (ask user if we cannot find binaries) PATHS=( /usr/lib/mono/gtk-sharp-2.0 /usr/lib/cli/gtk-sharp-2.0 /Library/Frameworks/Mono.framework/Versions/2.8/lib/mono/gtk-sharp-2.0 ) searchpaths "Gtk#" gtk-sharp.dll PATHS[@] GTKDIR=$RESULT echo "Successfully found Gtk# root directory." PATHS=( /usr/lib/mono/gtk-sharp-2.0 /usr/lib/cli/glib-sharp-2.0 /Library/Frameworks/Mono.framework/Versions/2.8/lib/mono/gtk-sharp-2.0 ) searchpaths "Glib" glib-sharp.dll PATHS[@] GLIBDIR=$RESULT echo "Successfully found Glib# root directory." PATHS=( /usr/lib/mono/gtk-sharp-2.0 /usr/lib/cli/atk-sharp-2.0 /Library/Frameworks/Mono.framework/Versions/2.8/lib/mono/gtk-sharp-2.0 ) searchpaths "Atk#" atk-sharp.dll PATHS[@] ATKDIR=$RESULT echo "Successfully found Atk# root directory." PATHS=( /usr/lib/mono/gtk-sharp-2.0 /usr/lib/cli/gdk-sharp-2.0 /Library/Frameworks/Mono.framework/Versions/2.8/lib/mono/gtk-sharp-2.0 ) searchpaths "Gdk#" gdk-sharp.dll PATHS[@] GDKDIR=$RESULT echo "Successfully found Gdk# root directory." cp bonus/load-gtk.fsx load-gtk1.fsx sed "s,INSERTGTKPATH,$GTKDIR,g" load-gtk1.fsx load-gtk2.fsx sed "s,INSERTGDKPATH,$GDKDIR,g" load-gtk2.fsx load-gtk3.fsx sed "s,INSERTATKPATH,$ATKDIR,g" load-gtk3.fsx load-gtk4.fsx sed "s,INSERTGLIBPATH,$GLIBDIR,g" load-gtk4.fsx load-gtk.fsx rm load-gtk1.fsx rm load-gtk2.fsx rm load-gtk3.fsx rm load-gtk4.fsx mv load-gtk.fsx $FSHARPDIR/load-gtk.fsx # Generate 'fsharpc' and 'fsharpi' scripts (using the F# path) # 'fsharpi' automatically searches F# root directory (e.g. load-gtk) echo "#!/bin/sh" fsharpc echo "exec mono $FSHARPDIR/fsc.exe --resident \"\$@\"" fsharpc chmod 755 fsharpc echo "#!/bin/sh" fsharpi echo "exec mono $FSHARPDIR/fsi.exe -I:\"$FSHARPDIR\" \"\$@\"" fsharpi chmod 755 fsharpi mv fsharpc $BIN/fsharpc mv fsharpi $BIN/fsharpi Thanks a lot!

  Read the article

• How to detect UTF-8-based encoded strings [closed]

  - by Diego Sendra

  A customer of asked us to build him a multi-language based support VB6 scraper, for which we had the need to detect UTF-8 based encoded strings to decode it later for proper displaying in application UI. It's necessary to point out that this need arises based on VB6 limitations to natively support UTF-8 in its controls, contrary to what it happens in .NET where you can tell a control that it should expect UTF-8 encoding. VB6 natively supports ISO 8859-1 and/or Windows-1252 encodings only, for which textboxes, dropdowns, listview controls, others can't be defined to natively support/expect UTF-8 as you can do in .NET considering what we just explained; so we would see weird symbols such as é, è among others, making it a whole mess at the time of displaying. So, next function contains whole UTF-8 encoded punctuation marks and symbols from languages like Spanish, Italian, German, Portuguese, French and others, based on an excellent UTF-8 based list we got from this link - Ref. http://home.telfort.nl/~t876506/utf8tbl.html Basically, the function compares if each and one of the listed UTF-8 encoded sentences, separated by | (pipe) are found in our passed string making a substring search first. Whether it's not found, it makes an alternative ASCII value based search to get a match. Say, a string like "Societé" (Society in english) would return FALSE through calling isUTF8("Societé") while it would return TRUE when calling isUTF8("SocietÈ") since È is the UTF-8 encoded representation of é. Once you got it TRUE or FALSE, you can decode the string through DecodeUTF8() function for properly displaying it, a function we found somewhere else time ago and also included in this post. Function isUTF8(ByVal ptstr As String) Dim tUTFencoded As String Dim tUTFencodedaux Dim tUTFencodedASCII As String Dim ptstrASCII As String Dim iaux, iaux2 As Integer Dim ffound As Boolean ffound = False ptstrASCII = "" For iaux = 1 To Len(ptstr) ptstrASCII = ptstrASCII & Asc(Mid(ptstr, iaux, 1)) & "|" Next tUTFencoded = "Ä|Ã…|Ç|É|Ñ|Ö|ÃŒ|á|Ã|â|ä|ã|Ã¥|ç|é|è|ê|ë|í|ì|î|ï|ñ|ó|ò|ô|ö|õ|ú|ù|û|ü|â€|°|¢|£|§|•|¶|ß|®|©|â„¢|´|¨|â‰|Æ|Ø|∞|±|≤|≥|Â¥|µ|∂|∑|âˆ|Ï€|∫|ª|º|Ω|æ|ø|¿|¡|¬|√|Æ’|≈|∆|«|»|…|Â|À|Ã|Õ|Å’|Å“|–|—|“|â€|‘|’|÷|â—Š|ÿ|Ÿ|â„|€|‹|›|ï¬|fl|‡|·|‚|„|‰|Â|Ú|Ã|Ë|È|Ã|ÃŽ|Ã|ÃŒ|Ó|Ô||Ã’|Ú|Û|Ù|ı|ˆ|Ëœ|¯|˘|Ë™|Ëš|¸|Ë|Ë›|ˇ" & _ "Å|Å¡|¦|²|³|¹|¼|½|¾|Ã|×|Ã|Þ|ð|ý|þ" & _ "â‰|∞|≤|≥|∂|∑|âˆ|Ï€|∫|Ω|√|≈|∆|â—Š|â„|ï¬|fl||ı|˘|Ë™|Ëš|Ë|Ë›|ˇ" tUTFencodedaux = Split(tUTFencoded, "|") If UBound(tUTFencodedaux) > 0 Then iaux = 0 Do While Not ffound And Not iaux > UBound(tUTFencodedaux) If InStr(1, ptstr, tUTFencodedaux(iaux), vbTextCompare) > 0 Then ffound = True End If If Not ffound Then 'ASCII numeric search tUTFencodedASCII = "" For iaux2 = 1 To Len(tUTFencodedaux(iaux)) 'gets ASCII numeric sequence tUTFencodedASCII = tUTFencodedASCII & Asc(Mid(tUTFencodedaux(iaux), iaux2, 1)) & "|" Next 'tUTFencodedASCII = Left(tUTFencodedASCII, Len(tUTFencodedASCII) - 1) 'compares numeric sequences If InStr(1, ptstrASCII, tUTFencodedASCII) > 0 Then ffound = True End If End If iaux = iaux + 1 Loop End If isUTF8 = ffound End Function Function DecodeUTF8(s) Dim i Dim c Dim n s = s & " " i = 1 Do While i <= Len(s) c = Asc(Mid(s, i, 1)) If c And &H80 Then n = 1 Do While i + n < Len(s) If (Asc(Mid(s, i + n, 1)) And &HC0) <> &H80 Then Exit Do End If n = n + 1 Loop If n = 2 And ((c And &HE0) = &HC0) Then c = Asc(Mid(s, i + 1, 1)) + &H40 * (c And &H1) Else c = 191 End If s = Left(s, i - 1) + Chr(c) + Mid(s, i + n) End If i = i + 1 Loop DecodeUTF8 = s End Function

  Read the article

• Guessing Excel Data Types

  - by AjarnMark

  Note to Self HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Jet\4.0\Engines\Excel: TypeGuessRows = 0 means scan everything. Note to Others About 10 years ago I stumbled across this bit of information just when I needed it and it saved my project.  Then for some reason, a few years later when it would have been nice, but not critical, for some reason I could not find it again anywhere.  Well, now I have stumbled across it again, and to preserve my future self from nightmares and sudden baldness due to pulling my hair out, I have decided to blog it in the hopes that I can find it again this way. Here’s the story…  When you query data from an Excel spreadsheet, such as with old-fashioned DTS packages in SQL 2000 (my first reference) or simply with an OLEDB Data Adapter from ASP.NET (recent task) and if you are using the Microsoft Jet 4.0 driver (newer ones may deal with this differently) then you can get funny results where the query reports back that a cell value is null even when you know it contains data. What happens is that Excel doesn’t really have data types.  While you can format information in cells to appear like certain data types (e.g. Date, Time, Decimal, Text, etc.) that is not really defining the cell as being of a certain type like we think of when working with databases.  But, presumably, to make things more convenient for the user (programmer) when you issue a query against Excel, the query processor tries to guess what type of data is contained in each column and returns it in an appropriate manner.  This is all well and good IF your data is consistent in every row and matches what the processor guessed.  And, for efficiency’s sake, when the query processor is trying to figure out each column’s data type, it does so by analyzing only the first 8 rows of data (default setting). Now here’s the problem, suppose that your spreadsheet contains information about clothing, and one of the columns is Size.  Now suppose that in the first 8 rows, all of your sizes look like 32, 34, 18, 10, and so on, using numbers, but then, somewhere after the 8th row, you have some rows with sizes like S, M, L, XL.  What happens is that by examining only the first 8 rows, the query processor inferred that the column contained numerical data, and then when it hits the non-numerical data in later rows, it comes back blank.  Major bummer, and a real pain to track down if you don’t know that Excel is doing this, because you study the spreadsheet and say, “the data is RIGHT THERE!  WHY doesn’t the query see it?!?!”  And the hair-pulling begins. So, what’s a developer to do?  One option is to go to the registry setting noted above and change the DWORD value of TypeGuessRows from the default of 8 to 0 (zero).  Setting this value to zero will force Jet to scan every row in the spreadsheet before making its determination as to what type of data the column contains.  And that means that in the example above, it would have treated the column as a string rather than as numeric, and presto! your query now returns all of the values that you know are in there. Of course, there is a caveat… if you are querying large spreadsheets, making Jet scan every row can be quite a performance hit.  You could enter a different number (more than 8) that you believe is a better sampling of rows to make the guess, but you still have the possibility that every row scanned looks alike, but that later rows are different, and that you might get blanks when there really is data there.  That’s the type of gamble, I really don’t like to take with my data. Anyone with a better approach, or with experience with more recent drivers that have a better way of handling data types, please chime in!

  Read the article

• Do we still have a case against the goto statement? [closed]

  - by FredOverflow

  Possible Duplicate: Is it ever worthwhile using goto? In a recent article, Andrew Koenig writes: When asked why goto statements are harmful, most programmers will say something like "because they make programs hard to understand." Press harder, and you may well hear something like "I don't really know, but that's what I was taught." For that reason, I'd like to summarize Dijkstra's arguments. He then shows two program fragments, one without a goto and and one with a goto: if (n < 0) n = 0; Assuming that n is a variable of a built-in numeric type, we know that after this code, n is nonnegative. Suppose we rewrite this fragment: if (n >= 0) goto nonneg; n = 0; nonneg: ; In theory, this rewrite should have the same effect as the original. However, rewriting has changed something important: It has opened the possibility of transferring control to nonneg from anywhere else in the program. I emphasized the part that I don't agree with. Modern languages like C++ do not allow goto to transfer control arbitrarily. Here are two examples: You cannot jump to a label that is defined in a different function. You cannot jump over a variable initialization. Now consider composing your code of tiny functions that adhere to the single responsibility principle: int clamp_to_zero(int n) { if (n >= 0) goto n_is_not_negative: n = 0; n_is_not_negative: return n; } The classic argument against the goto statement is that control could have transferred from anywhere inside your program to the label n_is_not_negative, but this simply is not (and was never) true in C++. If you try it, you will get a compiler error, because labels are scoped. The rest of the program doesn't even see the name n_is_not_negative, so it's just not possible to jump there. This is a static guarantee! Now, I'm not saying that this version is better then the one without the goto, but to make the latter as expressive as the first one, we would at least have to insert a comment, or even better yet, an assertion: int clamp_to_zero(int n) { if (n < 0) n = 0; // n is not negative at this point assert(n >= 0); return n; } Note that you basically get the assertion for free in the goto version, because the condition n >= 0 is already written in line 1, and n = 0; satisfies the condition trivially. But that's just a random observation. It seems to me that "don't use gotos!" is one of those dogmas like "don't use multiple returns!" that stem from a time where the real problem were functions of hundreds or even thousand of lines of code. So, do we still have a case against the goto statement, other than that it is not particularly useful? I haven't written a goto in at least a decade, but it's not like I was running away in terror whenever I encountered one. 1 Ideally, I would like to see a strong and valid argument against gotos that still holds when you adhere to established programming principles for clean code like the SRP. "You can jump anywhere" is not (and has never been) a valid argument in C++, and somehow I don't like teaching stuff that is not true. 1: Also, I have never been able to resurrect even a single velociraptor, no matter how many gotos I tried :(

  Read the article

• Announcing Oracle Knowledge 8.5: Even Superheroes Need Upgrades

  - by Richard Lefebvre

  It’s no secret that we like Iron Man here at Oracle. We've certainly got stuff in common: one of the world’s largest technology companies and one of the world’s strongest technology-driven superheroes. If you've seen the recent Iron Man movies, you might have even noticed some of our servers sitting in Tony Stark’s lab. Heck, our CEO made a cameo appearance in one of the movies. Yeah, we’re fans. Especially as Iron Man is a regular guy with some amazing technology – like us. But Like all great things even Superheroes need upgrades, whether it’s their suit, their car or their spacestation. Oracle certainly has its share of advanced technology.  For example, Oracle acquired InQuira in 2011 after years of watching the company advance the science of Knowledge Management.  And it was some extremely super technology.  At that time, Forrester’s Kate Leggett wrote about it in ‘Standalone Knowledge Management Is Dead With Oracle's Announcement To Acquire InQuira’ saying ‘Knowledge, accessible via web self-service or agent UIs, is a critical customer service component for industries fielding repetitive questions about policies, procedures, products, and solutions.’  One short sentence that amounts to a very tall order.  Since the acquisition our KM scientists have been hard at work in their labs. Today Oracle announced its first major knowledge management release since its acquisition of InQuira: Oracle Knowledge 8.5. We’ve put a massively-upgraded supersuit on our KM solution because we still have bad guys to fight. And we are very proud to say that we went way beyond our original plans. So what, exactly, did we do in Oracle Knowledge 8.5? We did what any high-tech super-scientist would do. We made Oracle Knowledge smarter, stronger and faster. First, we gave Oracle Knowledge a stronger heart: Certified on Oracle technologies, including Oracle WebLogic Server, Oracle Business Intelligence, Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud. Huge scaling and performance improvements. Then we gave it a better reach: Improved iConnect functionality that delivers contextualized knowledge directly into CRM applications. Better content acquisition support across disparate sources. Enhanced Language Support including Natural Language search support for 16 Languages. Enhanced Keyword Search for 23 authoring languages, as well as enhanced out-of-the-box industry ontologies covering 14 languages. And finally we made Oracle Knowledge ridiculously smarter: Improved Natural Language Search and a new Contextual Answer Delivery that understands the true intent of each inquiry to deliver the best possible answers. AnswerFlow for Guided Navigation & Answer Delivery, a new application for guided troubleshooting and answer delivery. Knowledge Analytics standardized on Oracle’s Business Intelligence Enterprise Edition. Knowledge Analytics Dashboards optimized search and content creation through targeted, actionable insights. A new three-level language model "Global - Language - Locale" that provides an improved search experience for organizations with a global footprint. We believe that Oracle Knowledge 8.5 is the most sophisticated KM solution in existence today and we’ve worked very hard to help it fulfill the promise of KM: empowering customers and employees with deep insights wherever they need them. We hope you agree it’s a suit worth wearing. We are continuing to invest in Knowledge Management as it continues to be especially relevant today with the enterprise push for peer collaboration, crowd-sourced wisdom, agile innovation, social interaction channels, applied real-time analytics, and personalization. In fact, we believe that Knowledge Management is a critical part of the Customer Experience portfolio for success. From empowering employee’s, to empowering customers, to gaining the insights from interactions across all channels, businesses today cannot efficiently scale their efforts, strengthen their customer relationships or achieve their growth goals without a solid Knowledge Management foundation to build from. And like every good superhero saga, we’re not even close to being finished. Next we are taking Oracle Knowledge into the Cloud. Yes, we’re thinking what you’re thinking: ROCKET BOOTS! Stay tuned for the next adventure… By Nav Chakravarti, Vice-President, Product Management, CRM Knowledge and previously the CTO of InQuira, a knowledge management company acquired by Oracle in 2011

  Read the article

• SQL Server Transaction Marks: Restoring multiple databases to a common relative point

  - by Mladen Prajdic

  We’re all familiar with the ability to restore a database to point in time using the RESTORE WITH STOPAT statement. But what if we have multiple databases that are accessed from one application or are modifying each other? And over multiple instances? And all databases have different workloads? And we want to restore all of the databases to some known common relative point? The catch here is that this common relative point isn’t the same point in time for all databases. This common relative point in time might be now in DB1, now-1 hour in DB2 and yesterday in DB3. And we don’t know the exact times. Let me introduce you to Transaction Marks. When we run a marked transaction using the WITH MARK option a flag is set in the transaction log and a row is added to msdb..logmarkhistory table. When restoring a transaction log backup we can restore to either before or after that marked transaction. The best thing is that we don’t even need to have one database modifying another database. All we have to do is use a marked transaction with the same name in different database. Let’s see how this works with an example. The code comments say what’s going on. USE master GOCREATE DATABASE TestTxMark1GOUSE TestTxMark1GOCREATE TABLE TestTable1( ID INT, VALUE UNIQUEIDENTIFIER) -- insert some data into the table so we can have a starting pointINSERT INTO TestTable1SELECT ROW_NUMBER() OVER(ORDER BY number) AS RN, NULLFROM master..spt_valuesORDER BY RNSELECT *FROM TestTable1GO-- TAKE A FULL BACKUP of the databseBACKUP DATABASE TestTxMark1 TO DISK = 'c:\TestTxMark1.bak'GO USE master GOCREATE DATABASE TestTxMark2GOUSE TestTxMark2GOCREATE TABLE TestTable2( ID INT, VALUE UNIQUEIDENTIFIER)-- insert some data into the table so we can have a starting pointINSERT INTO TestTable2SELECT ROW_NUMBER() OVER(ORDER BY number) AS RN, NEWID()FROM master..spt_valuesORDER BY RNSELECT *FROM TestTable2GO-- TAKE A FULL BACKUP of our databseBACKUP DATABASE TestTxMark2 TO DISK = 'c:\TestTxMark2.bak'GO -- start a marked transaction that modifies both databasesBEGIN TRAN TxDb WITH MARK -- update values from NULL to random value UPDATE TestTable1 SET VALUE = NEWID(); -- update first 100 values from random value -- to NULL in different DB UPDATE TestTxMark2.dbo.TestTable2 SET VALUE = NULL WHERE ID <= 100;COMMITGO     -- some time goes by here -- with various database activity... -- We see two entries for marks in each database. -- This is just informational and has no bearing on the restore itself.SELECT * FROM msdb..logmarkhistory USE masterGO-- create a log backup to restore to mark pointBACKUP LOG TestTxMark1 TO DISK = 'c:\TestTxMark1.trn'GO-- drop the database so we can restore it backDROP DATABASE TestTxMark1GO USE masterGO-- create a log backup to restore to mark pointBACKUP LOG TestTxMark2 TO DISK = 'c:\TestTxMark2.trn'GO-- drop the database so we can restore it backDROP DATABASE TestTxMark2GO -- RESTORE THE DATABASE BACK BEFORE OUR TRANSACTION-- restore the full backup RESTORE DATABASE TestTxMark1 FROM DISK = 'c:\TestTxMark1.bak' WITH NORECOVERY;-- restore the log backup to the transaction markRESTORE LOG TestTxMark1 FROM DISK = 'c:\TestTxMark1.trn' WITH RECOVERY, -- recover to state before the transaction STOPBEFOREMARK = 'TxDb'; -- recover to state after the transaction -- STOPATMARK = 'TxDb';GO -- RESTORE THE DATABASE BACK BEFORE OUR TRANSACTION-- restore the full backup RESTORE DATABASE TestTxMark2 FROM DISK = 'c:\TestTxMark2.bak' WITH NORECOVERY;-- restore the log backup to the transaction markRESTORE LOG TestTxMark2 FROM DISK = 'c:\TestTxMark2.trn' WITH RECOVERY, -- recover to state before the transaction STOPBEFOREMARK = 'TxDb'; -- recover to state after the transaction -- STOPATMARK = 'TxDb';GO USE TestTxMark1-- we restored to time before the transaction -- so we have NULL values in our tableSELECT * FROM TestTable1 USE TestTxMark2-- we restored to time before the transaction -- so we DON'T have NULL values in our tableSELECT * FROM TestTable2   Transaction marks can be used like a crude sync mechanism for cross database operations. With them we can mark our databases with a common “restore to” point so we know we have a valid state between all databases to restore to.

  Read the article

• .Net Reflector 6.5 EAP now available

  - by CliveT

  With the release of CLR 4 being so close, we’ve been working hard on getting the new C# and VB language features implemented inside Reflector. The work isn’t complete yet, but we have some of the features working. Most importantly, there are going to be changes to the Reflector object model, and we though it would be useful for people to see the changes and have an opportunity to comment on them. Before going any further, we should tell you what the EAP contains that’s different from the released version. A number of bugs have been fixed, mainly bugs that were raised via the forum. This is slightly offset by the fact that this EAP hasn’t had a whole lot of testing and there may have been new bugs introduced during the development work we’ve been doing. The C# language writer has been changed to display in and out co- and contra-variance markers on interfaces and delegates, and to display default values for optional parameters in method definitions. We also concisely display values passed by reference into COM calls. However, we do not change callsites to display calls using named parameters; this looks like hard work to get right. The forthcoming version of the C# language introduces dynamic types and dynamic calls. The new version of Reflector should display a dynamic call rather than the generated C#: dynamic target = MyTestObject(); target.Hello("Mum"); We have a few bugs in this area where we are not casting to dynamic when necessary. These have been fixed on a branch and should make their way into the next EAP. To support the dynamic features, we’ve added the types IDynamicMethodReferenceExpression, IDynamicPropertyIndexerExpression, and IDynamicPropertyReferenceExpression to the object model. These types, based on the versions without “Dynamic” in the name, reflect the fact that we don’t have full information about the method that is going to be called, but only have its name (as a string). These interfaces are going to change – in an internal version, they have been extended to include information about which parameter positions use runtime types and which use compile time types. There’s also the interface, IDynamicVariableDeclaration, that can be used to determine if a particular variable is used at dynamic call sites as a target. A couple of these language changes have also been added to the Visual Basic language writer. The new features are exposed only when the optimization level is set to .NET 4. When the level is set this high, the other standard language writers will simply display a message to say that they do not handle such an optimization level. Reflector Pro now has 4.0 as an optional compilation target and we have done some work to get the pdb generation right for these new features. The EAP version of Reflector no longer installs the add-in on startup. The first time you run the EAP, it displays the integration options dialog. You can use the checkboxes to select the versions of Visual Studio into which you want to install the EAP version. Note that you can only have one version of Reflector Pro installed in Visual Studio; if you install into a Visual Studio that has another version installed, the previous version will be removed. Please try it out and send your feedback to the EAP forum.

  Read the article

• Announcing Oracle Knowledge 8.5: Even Superheroes Need Upgrades

  - by Chris Warner

  It’s no secret that we like Iron Man here at Oracle. We've certainly got stuff in common: one of the world’s largest technology companies and one of the world’s strongest technology-driven superheroes. If you've seen the recent Iron Man movies, you might have even noticed some of our servers sitting in Tony Stark’s lab. Heck, our CEO made a cameo appearance in one of the movies. Yeah, we’re fans. Especially as Iron Man is a regular guy with some amazing technology – like us. But Like all great things even Superheroes need upgrades, whether it’s their suit, their car or their spacestation. Oracle certainly has its share of advanced technology.  For example, Oracle acquired InQuira in 2011 after years of watching the company advance the science of Knowledge Management.  And it was some extremely super technology.  At that time, Forrester’s Kate Leggett wrote about it in ‘Standalone Knowledge Management Is Dead With Oracle's Announcement To Acquire InQuira’ saying ‘Knowledge, accessible via web self-service or agent UIs, is a critical customer service component for industries fielding repetitive questions about policies, procedures, products, and solutions.’  One short sentence that amounts to a very tall order.  Since the acquisition our KM scientists have been hard at work in their labs. Today Oracle announced its first major knowledge management release since its acquisition of InQuira: Oracle Knowledge 8.5. We’ve put a massively-upgraded supersuit on our KM solution because we still have bad guys to fight. And we are very proud to say that we went way beyond our original plans. So what, exactly, did we do in Oracle Knowledge 8.5? We did what any high-tech super-scientist would do. We made Oracle Knowledge smarter, stronger and faster. First, we gave Oracle Knowledge a stronger heart: Certified on Oracle technologies, including Oracle WebLogic Server, Oracle Business Intelligence, Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud. Huge scaling and performance improvements. Then we gave it a better reach: Improved iConnect functionality that delivers contextualized knowledge directly into CRM applications. Better content acquisition support across disparate sources. Enhanced Language Support including Natural Language search support for 16 Languages. Enhanced Keyword Search for 23 authoring languages, as well as enhanced out-of-the-box industry ontologies covering 14 languages. And finally we made Oracle Knowledge ridiculously smarter: Improved Natural Language Search and a new Contextual Answer Delivery that understands the true intent of each inquiry to deliver the best possible answers. AnswerFlow for Guided Navigation & Answer Delivery, a new application for guided troubleshooting and answer delivery. Knowledge Analytics standardized on Oracle’s Business Intelligence Enterprise Edition. Knowledge Analytics Dashboards optimized search and content creation through targeted, actionable insights. A new three-level language model "Global - Language - Locale" that provides an improved search experience for organizations with a global footprint. We believe that Oracle Knowledge 8.5 is the most sophisticated KM solution in existence today and we’ve worked very hard to help it fulfill the promise of KM: empowering customers and employees with deep insights wherever they need them. We hope you agree it’s a suit worth wearing. We are continuing to invest in Knowledge Management as it continues to be especially relevant today with the enterprise push for peer collaboration, crowd-sourced wisdom, agile innovation, social interaction channels, applied real-time analytics, and personalization. In fact, we believe that Knowledge Management is a critical part of the Customer Experience portfolio for success. From empowering employee’s, to empowering customers, to gaining the insights from interactions across all channels, businesses today cannot efficiently scale their efforts, strengthen their customer relationships or achieve their growth goals without a solid Knowledge Management foundation to build from. And like every good superhero saga, we’re not even close to being finished. Next we are taking Oracle Knowledge into the Cloud. Yes, we’re thinking what you’re thinking: ROCKET BOOTS! Stay tuned for the next adventure… By Nav Chakravarti, Vice-President, Product Management, CRM Knowledge and previously the CTO of InQuira, a knowledge management company acquired by Oracle in 2011. 

  Read the article

• Performing an upgrade from TFS 2008 to TFS 2010

  - by Enrique Lima

  I recently had to go through the process of migrating a TFS 2008 SP1 to a TFS 2010 environment. I will go into the details of the tasks that I went through, but first I want to explain why I define it as a migration and not an upgrade. When this environment was setup, based on support and limitations for TFS 2008, we used a 32 bit platform for the TFS Application Tier and Build Servers.  The Data Tier, since we were installing SP1 for TFS 2008, was done as a 64 bit installation.  We knew at that point that TFS 2010 was in the picture so that served as further motivation to make that a 64bit install of SQL Server.  The SQL Server at that point was a single instance (Default) installation too.  We had a pretty good strategy in place for backups of the databases supporting the environment (and this made the migration so much smoother), so we were pretty familiar with the databases and the purpose they serve. I am sure many of you that have gone through a TFS 2008 installation have encountered challenges and trials.  And likely even more so if you, like me, needed to configure your deployment for SSL.  So, frankly I was a little concerned about the process of migrating.  They say practice makes perfect, and this environment I worked on is in some way my brain child, so I was not ready nor willing for this to be a failure or something that would impact my client’s work. Prior to going through the migration process, we did the install of the environment.  The Data Tier was the same, with a new Named instance in place to host the 2010 install.  The Application Tier was in place too, and we did the DefaultCollection configuration to test and validate all components were in place as they should. Anyway, on to the tasks for the migration (thanks to Martin Hinselwood for his very thorough documentation): Close access to TFS 2008, you want to make sure all code is checked in and ready to go.  We stated a difference of 8 hours between code lock and the start of migration to give time for any unexpected delay.  How do we close access?  Stop IIS. Backup your databases.  Which ones? TfsActivityLogging TfsBuild TfsIntegration TfsVersionControl TfsWorkItemTracking TfsWorkItemTrackingAttachments Restore the databases to the new Named Instance (make sure you keep the same names) Now comes the fun part! The actual import/migration of the databases.  A couple of things happen here. The TfsIntegration database will be scanned, the other databases will be checked to validate they exist.  Those databases will go through a process of data being extracted and transferred to the TfsVersionControl database to then be renamed to Tfs_<Collection>. You will be using a tool called tfsconfig and the option import. This tool is located in the TFS 2010 installation path (C:\Program Files\Microsoft Team Foundation Server 2010\Tools),  the command to use is as follows:    tfsconfig import /sqlinstance:<instance> /collectionName:<name> /confirmed Where <instance> is going to be the SQL Server instance where you restored the databases to.  <name> is the name you will give the collection. And to explain /confirmed, well this means you have done a backup of the databases, why?  well remember you are going to merge the databases you restored when you execute the tfsconfig import command. The process will go through about 200 tasks, once it completes go to Team Foundation Server Administration Console and validate your imported databases and contents. We’ll keep this manageable, so the next post is about how to complete that implementation with the SSL configuration.

  Read the article

• What Counts For a DBA – Decisions

  - by Louis Davidson

  It’s Friday afternoon, and the lead DBA, a very talented guy, is getting ready to head out for two well-earned weeks of vacation, with his family, when this error message pops up in his inbox: Msg 211, Level 23, State 51, Line 1. Possible schema corruption. Run DBCC CHECKCATALOG. His heart sinks. It’s ten…no eight…minutes till it’s time to walk out the door. He glances around at his coworkers, competent to handle many problems, but probably not up to the challenge of fixing possible database corruption. What does he do? After a few agonizing moments of indecision, he clicks shut his laptop. He’ll just wait and see. It was unlikely to come to anything; after all, it did say “possible” schema corruption, not definite. In that moment, his fate was sealed. The start of the solution to the problem (run DBCC CHECKCATALOG) had been right there in the error message. Had he done this, or at least took two of those eight minutes to delegate the task to a coworker, then he wouldn’t have ended up spending two-thirds of an idyllic vacation (for the rest of the family, at least) dealing with a problem that got consistently worse as the weekend progressed until the entire system was down. When I told this story to a friend of mine, an opera fan, he smiled and said it described the basic plotline of almost every opera or ‘Greek Tragedy’ ever written. The particular joy in opera, he told me, isn’t the warbly voiced leading ladies, or the plump middle-aged romantic leads, or even the music. No, what packs the opera houses in Italy is the drama of characters who, by the very nature of their life-experiences and emotional baggage, make all sorts of bad choices when faced with ordinary decisions, and so move inexorably to their fate. The audience is gripped by the spectacle of exotic characters doomed by their inability to see the obvious. I confess, my personal experience with opera is limited to Bugs Bunny in “What’s Opera, Doc?” (Elmer Fudd is a great example of a bad decision maker, if ever one existed), but I was struck by my friend’s analogy. If all the DBA cubicles were a stage, I think we would hear many similarly tragic tales, played out to music: “Error handling? We write our code to never experience errors, so nah…“ “Backups failed today, but it’s okay, we’ll back up tomorrow (we’ll back up tomorrow)“ And similarly, they would leave their audience gasping, not necessarily at the beauty of the music, or poetry of the lyrics, but at the inevitable, grisly fate of the protagonists. If you choose not to use proper error handling, or if you choose to skip a backup because, hey, you haven’t had a server crash in 10 years, then inevitably, in that moment you expected to be enjoying a vacation, or a football game, with your family and friends, you will instead be sitting in front of a computer screen, paying for your poor choices. Tragedies are very much part of IT. Most of a DBA’s day to day work has limited potential to wreak havoc; paperwork, timesheets, random anonymous threats to developers, routine maintenance and whatnot. However, just occasionally, you, as a DBA, will face one of those decisions that really matter, and which has the possibility to greatly affect your future and the future of your user’s data. Make those decisions count, and you’ll avoid the tragic fate of many an operatic hero or villain.

  Read the article

• Welcome 2011

  - by PSteele

  About this time last year, I wrote a blog post about how January of 2010 was almost over and I hadn’t done a single blog post.  Ugh…  History repeats itself. 2010 in Review If I look back at 2010, it was a great year in terms of technology and development: Visited Redmond to attend the MVP Summit in February.  Had a great time with the MS product teams and got to connect with some really smart people. Continued my work on Visual Studio Magazine’s “C# Corner” column.  About mid-year, the column changed from an every-other-month print column to an every-other-month print column along with bi-monthly web-only articles.  Needless to say, this kept me even busier and away from my blog. Participated in another GiveCamp!  Thanks to the wonderful leadership of Michael Eaton and all of his minions, GiveCamp 2010 was another great success.  Planning for GiveCamp 2011 will be starting soon… I switched to DVCS full time.  After years of being a loyal SVN user, I got bit by the DVCS bug.  I played around with both Mercurial and Git and finally settled on Mercurial.  It’s seamless integration with Windows Explorer along with it’s wealth of plugins made me fall in love.  I can’t imagine going back and using a centralized version control system. Continued to work with the awesome group of talent at SRT Solutions.  Very proud that SRT won it’s third consecutive FastTrack award! Jumped off the BlackBerry train and enjoying the smooth ride of Android.  It was time to replace the old BlackBerry Storm so I did some research and settled on the Motorola DroidX.  I couldn’t be happier.  Android is a slick OS and the DroidX is a sweet piece of hardware.  Been dabbling in some Android development with both Eclipse and IntelliJ IDEA (I like IntelliJ IDEA a lot better!).   2011 Plans On January 1st I was pleasantly surprised to get an email from the Microsoft MVP program letting me know that I had received the MVP award again for my community work in 2010.  I’m honored and humbled to be recognized by Microsoft as well as my peers! I’ll continue to do some Android development.  I’m currently working on a simple app to get me feet wet.  It may even makes it’s way into the Android Market. I’ve got a project that could really benefit from WPF so I’ll be diving into WPF this year.  I’ve played around with WPF a bit in the past – simple demos and learning exercises – but this will give me a chance to build an entire application in WPF.  I’m looking forward to the increased freedom that a WPF UI should give me. I plan on blogging a lot more in 2011! Technorati Tags: Android,MVP,Mercurial,WPF,SRT,GiveCamp

  Read the article

• Inspiring a co-worker to adopt better coding practices?

  - by Aaronaught

  In the Handling my antiquated coworker question, various people discussed strategies for dealing with coworkers who are unwilling to integrate their workflow with the team's. I'd like, if possible, to learn some strategies for "teaching" a coworker who is merely ignorant of modern techniques and tools, and possibly a little apathetic. I've started working with a programmer who until recently has been working in relative isolation, in a different part of the company. He has extensive domain knowledge and most importantly he has demonstrated good problem-solving skills, something which many candidates seem to lack. However, the actual (C#) code I've seen is a throwback to the VB6 days. Procedural structure, Hungarian notation, global variables (abuse of static), no interfaces, no tests, non-use of Generics, throwing System.Exception... you get the idea. This programmer is a fair bit older than I am and, by first impressions at least, doesn't actively seek positive change. I'm not going to say resistant to change, because I think that is largely an issue of how the topic gets broached, and I want to be prepared. Programmers tend to be stubborn people, and going in with guns blazing and instituting rip-it-to-shreds code reviews and strictly-enforced policies is very likely not going to produce the end result that I want. If this were a new hire, a junior programmer, I wouldn't think twice about taking a "mentor" stance, but I'm extremely wary of treating an experienced employee as a clueless newbie (which he's not - he just hasn't kept pace with certain advancements in the field). How might I go about raising this developer's code quality standard the Dale Carnegie way, through gentle persuasion and non-material incentives? What would be the best strategy for effecting subtle, gradual changes, without creating an adversarial situation? Have other people - especially lead developers - been in this type of situation before? Which strategies were successful at stimulating interest and creating a positive group dynamic? Which strategies weren't successful and would be better to avoid? Clarifications: I really feel that several people are answering based on personal feelings without actually reading all of the details of the question. Please note the following, which should have been implied but I am now making explicit: This coworker is only my "senior" by virtue of age. I never said that his title, sphere of influence, or years at the organization exceed mine, and in fact, none of those things are true. He's a LOB programmer who's been absorbed into the main development shop. That's it. I am not a new hire, junior programmer, or other naïve idiot with grand plans to transform the company overnight. I am basically in charge of the software process, but as many who've worked as "leads" will know, responsibilities don't always correlate precisely with the org chart. I'm not asking people how to get my way, come hell or high water. I could do that if I wanted to, with the net result being that this person would become resentful and/or quit. Please try to understand that I am looking for a social, cooperative method of driving change. The mention of "...global variables... no tests... throwing System.Exception" was intended to demonstrate that the problems are not just superficial or aesthetic. Practices that may work for relatively small CRUD apps do not necessarily work for large enterprise apps, and in fact, none of the code so far has actually passed the integration tests. Please, try to take the question at face value, accept that I actually know what I'm talking about, and either answer the question that I actually asked or move on. P.S. My sincerest gratitude to those who -did- offer constructive advice rather than arguing with the premise. I'm going to leave this open for a while longer as I'm hoping to hear more in the way of real-world experiences.

  Read the article

• DeveloperDeveloperDeveloper! Scotland 2010 - DDDSCOT

  - by Plip

  DDD in Scotland was held on the 8th May 2010 in Glasgow and I was there, not as is uaual at these kind of things as an organiser but actually as a speaker and delegate. The weekend started for me back on Thursday with the arrival of Dave Sussman to my place in Lancashire, after a curry and watching the Electon night TV coverage we retired to our respective beds (yes, I know, I hate to shatter the illusion we both sleep in the same bed wearing matching pijamas is something I've shattered now) ready for the drive up to Glasgow the following afternoon. Before heading up to Glasgow we had to pick up Young Mr Hardy from Wigan then we began the four hour drive back in time... Something that struck me on the journey up is just how beautiful Scotland is. The menacing landscapes bordered with fluffy sheep and whirly-ma-gigs are awe inspiring - well worth driving up if you ever get the chance. Anywho we arrived in Glasgow, got settled intot he hotel and went in search of Speakers for pre conference drinks and food. We discovered a gaggle (I believe that's the collective term) of speakers in the Bar and when we reached critical mass headed off to the Speakers Dinner location. During dinner, SOMEONE set my hair on FIRE. That's all I'm going to say on the matter. Whilst I was enjoying my evening there was something nagging at me, I realised that I should really write my session as I was due to give it the following morning. So after a few more drinks I headed back to the hotel and got some well earned sleep (and washed the fire damage out of my hair). Next day, headed off to the conference which was a lovely stroll through Glasgow City Centre. Non of us got mugged, murdered (or set on fire) arriving safely at the venue, which was a bonus.   I was asked to read out the opening Slides for Barry Carr's session which I did dilligently and with such professionalism that I shocked even myself. At which point I reliased in just over an hour I had to give my presentation, so headed back to the speaker room to finish writing it. Wham, bam and it was all over. Session seemed to go well. I was speaking on Exception Driven Development, which isn't so much a technical solution but rather a mindset around how one should treat exceptions and their code. To be honest, I've not been so nervous giving a session for years - something about this topic worried me, I was concerned I was being too abstract in my thinking or that what I was saying was so obvious that everyone would know it, but it seems to have been well recieved which makes me a happy Speaker. Craig Murphy has some brilliant pictures of DDD Scotland 2010. After my session was done I grabbed some lunch and headed back to the hotel and into town to do some shopping (thus my conspicuous omission from the above photo). Later on we headed out to the geek dinner which again was a rum affair followed by a few drinks and a little boogie woogie. All in all a well run, well attended conference, by the community for the community. I tip my hat to the whole team who put on DDD Scotland!       

  Read the article

• SQL SERVER – Select the Most Optimal Backup Methods for Server

  - by pinaldave

  Backup and Restore are very interesting concepts and one should be very much with the concept if you are dealing with production database. One never knows when a natural disaster or user error will surface and the first thing everybody wants is to get back on point in time when things were all fine. Well, in this article I have attempted to answer a few of the common questions related to Backup methodology. How to Select a SQL Server Backup Type In order to select a proper SQL Server backup type, a SQL Server administrator needs to understand the difference between the major backup types clearly. Since a picture is worth a thousand words, let me offer it to you below. Select a Recovery Model First The very first question that you should ask yourself is: Can I afford to lose at least a little (15 min, 1 hour, 1 day) worth of data? Resist the temptation to save it all as it comes with the overhead – majority of businesses outside finances can actually afford to lose a bit of data. If your answer is YES, I can afford to lose some data – select a SIMPLE (default) recovery model in the properties of your database, otherwise you need to select a FULL recovery model. The additional advantage of the Full recovery model is that it allows you to restore the data to a specific point in time vs to only last backup time in the Simple recovery model, but it exceeds the scope of this article Backups in SIMPLE Recovery Model In SIMPLE recovery model you can select to do just Full backups or Full + Differential. Full Backup This is the simplest type of backup that contains all information needed to restore the database and should be your first choice. It is often sufficient for small databases, but note that it makes a big impact on the performance of your database Full + Differential Backup After Full, Differential backup picks up all of the changes since the last Full backup. This means if you made Full, Diff, Diff backup – the last Diff backup contains all of the changes and you don’t need the previous Differential backup. Differential backup is obviously smaller and carries less performance overhead Backups in FULL Recovery Model In FULL recovery model you can select Full + Transaction Log or Full + Differential + Transaction Log backup. You have to create Transaction Log backup, because at that time the log is being truncated. Otherwise your Transaction Log will grow uncontrollably. Full + Transaction Log Backup You would always need to perform a Full backup first. Then a series of Transaction log backup. Note that (in contrast to Differential) you need ALL transactions to log since the last Full of Diff backup to properly restore. Transaction log backups have the smallest performance overhead and can be performed often. Full + Differential + Transaction Log Backup If you want to ease the performance overhead on your server, you can replace some of the Full backup in the previous scenario with Differential. You restore scenario would start from Full, then the Last Differential, then all of the remaining transactions log backups Typical backup Scenarios You may say “Well, it is all nice – give me the examples now”. As you may already know, my favorite SQL backup software is SQLBackupAndFTP. If you go to Advanced Backup Schedule form in this program and click “Load a typical backup plan…” link, it will give you these scenarios that I think are quite common – see the image below. The Simplest Way to Schedule SQL Backups I hate to repeat myself, but backup scheduling in SQL agent leaves a lot to be desired. I do not know the simple way to schedule your SQL server backups than in SQLBackupAndFTP – see the image below. The whole backup scheduling with compression, encryption and upload to a Network Folder / HDD / NAS Drive / FTP / Dropbox / Google Drive / Amazon S3 takes just a few minutes – see my previous post for the review. Final Words This post offered an explanation for major backup types only. For more complicated scenarios or to research other options as usually go to MSDN. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Silverlight Cream for June 01, 2010 -- #874

  - by Dave Campbell

  In this Issue: Michael Washington, Alan Beasley and Michael Washington, Miroslav Miroslavov, Max Paulousky, Teresa and Ronald Burger, Laurent Duveau, Tim Heuer, Jeff Brand, Mike Snow, and John Papa. Shoutouts: To pay homage to the Advanced Options button in Expression Blend, Adam Kinney posted: Expression Blend Advanced Options square wallpaper SilverLaw stood his drag and drop ripple on it's head for this one: Silver Soccer - A Case Study for the Flexible Surface Effect (Silverlight 4) From SilverlightCream.com: Expression Blend DataStore - A Powerful Tool For Designers Michael Washington dug into the documentation and with some Microsoft assistance has figured out how to use the SetDataStoreAction in SketchFlow... good tutorial and a game to demonstrate it's use. Windows Phone 7 View Model Style Video Player Alan Beasley and Michael Washington teamed up again to produce a ViewModel-Style Video Player for WP7 ... very nice interface I might add... very detailed tutorial and all the code... oh, and did you notice it uses MVVMLight... on WP7? ... just thought I'd mention that :) Navigation in 3D world of 2D objects In part 7 of the CompleteIT code explenation, Miroslav Miroslavov is discussing some of the very cool animation they did... 3D, moving camera... cool stuff! Search Engine Optimization (SEO) for Silverlight Applications. Part 2 Max Paulousky has part 2 of his Silverlight 4 and SEO series up. In part 2 he's discussing sitemaps and html content providing. He also has good links showing where to submit your sitemaps and information. Mousin’ down the PathListBox Teresa and Ronald Burger (not sure which) has a post up about the PathListBox and how they drew the path that they ended up using, and the code used to enable animation. Dynamically apply and change Theme with the Silverlight Toolkit We've all had fun playing with themes, but Laurent Duveau has an example up of letting your users change the theme at run-time. Microsoft Translator client library for Silverlight Tim Heuer has been playing with the Microsoft Translator for Silverlight and he has a "Works on My Machine" license on what he's making available .. but considering his access to resources... I'd say go for it :) Custom Per-Page Transitions in Windows Phone 7 Jeff Brand has a follow-on to his other WP7 post about page transitions and is now discussing per-page transitions Silverlight Tip of the Day #26 – Changing the Startup Class Mike Snow's latest 'tip' is a little more involved than a tip ... changing the startup class and actually removing (in his example), the page and app classes... code and xaml! I've seen this before but never explained as clean... fun stuff. Behaviors in Blend 4 (Silverlight TV #30) Episode 30 of Silverlight TV (now a tag at Silverlight Cream) finds John Papa talking to Adam Kinney about Behaviors in Blend 4... not only using them but creating a custom one. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

< Previous Page | 700 701 702 703 704 705 706 707 708 709 710 711  | Next Page >