Search Results

Search found 20021 results on 801 pages for 'software engeneering learner'.

Page 708/801 | < Previous Page | 704 705 706 707 708 709 710 711 712 713 714 715  | Next Page >

• How do you recreate the System Recovery environment in Windows 7?

  - by Howiecamp

  I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

  Read the article

• Upgrade to Q9550 or i7 920 on a budget?

  - by evan

  I'm planning to upgrade my computer and torn between maxing out the system I have or investing in the X58 architecture. I'm currently using a E6600 Core 2 Duo with 4GB of RAM (800mhz) on an Asus PK5-E motherboard which I built two years ago. My original plan was that one day I'd upgrade machine to 8GB (1066mhz, the max the PK5-E allows) and to the Core 2 QuadQ9550 to give the machine a good four years of life. However, that was before the i7 came out. I use my computer mainly for software development , which I do inside Virtual Machines, and the i7 seems ideal for that because it no longer is limited by the speed of the FSB? And when I looked into it, getting 8GB DDR3 RAM isn't much more expensive than the 8GB of DDR2 and the i7 920 is comparable in price to the Q9550, which doesn't make much sense to me? So the question is it worth swapping the motherboard out for around $250 and upgrading all three components or using that money on SSD or 10rpm drive for the existing system's OS/Apps/Virtual Machine drive? Or just put the $250 towards a completely new machine in a year or two? Would the i7 really give that much of boost compared to the Q9550 for what I'd be using it for? Thanks in advance for your input!!!

  Read the article

• How to safely send newsletters on VPS (SMTP) w/ non-hosted domain as "From" email?

  - by Andy M

  Greetings, I'm trying to understand the safest way to use SMTP. I'm considering purchasing a second virtual server mainly for email sending, on which I will set up PHPlist (a free open-source mailing program), so we have the freedom to send unlimited newsletters (...well, 10,000 per day at least, which requires a VPS rather than shared hosting). Here's my current setup with a paid mass-mailing software: I have a website - let's call it MyHostedDomain.org. I send newsletters with the From / Reply To address as [email protected], which isn't being hosting by me but I have access to the email account. Can I more or less safely set this up with an SMTP server on a VPS? i.e. send messages using [email protected] as the visible address, but having it all go through my VPS SMTP? I cannot authenticate it, right? Is this too risky a practice? Is my only hope to use an address with a domain on the VPS, i.e. [email protected]? I already have a Reverse DNS record for the domain hosted on my current VPS. I also see other suggestions, like SenderID and DKIM. But with all these things combined, will this still work? I don't want to get blacklisted, but the good thing is this is a somewhat private list, and users opt-in to subscribe. So it's a self-made audience. (If it makes you feel better, this is related to a non-profit activity, not some marketing scam...it's for a good cause, I assure you!)

  Read the article

• Windows Explorer Keeps On Crashing

  - by Josefvz

  Hey Folks. I'm lost... I'm using Windows 7 Ultimate 64bit. My Pc is up to date(windows updates) and I've used Winutilities to scan my registry. My explorer.exe keeps on crashing. Just randomly it seems. I don't even need to be doing anything particular. I do have experience with pc in general as I'm a software developer. I know you will require additional info, but i don't know what, so just leave a comment and I'll update. Additional info I think i should also mention that explorer is the only app that crashes on my pc. The crash report i got now: Description: A problem caused this program to stop interacting with Windows. Problem signature: Problem Event Name: AppHangB1 Application Name: explorer.exe Application Version: 6.1.7600.16450 Application Timestamp: 4aebab8d Hang Signature: 0a1b Hang Type: 16897 OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 7177 Additional Hang Signature 1: 0a1bdae38ae7300761c516c4416d992c Additional Hang Signature 2: 1c51 Additional Hang Signature 3: 1c518a49cc7d37652d26c521e96f66c2 Additional Hang Signature 4: 521e Additional Hang Signature 5: 521e607ec26a72aab4ae5a7126916ef3 Additional Hang Signature 6: e5e3 Additional Hang Signature 7: e5e3ca31dad607fa7b858ff5ea5c0fa9

  Read the article

• Windows XP usb drivers reinstalling upon reboot

  - by iWerner

  We have a Windows XP SP3 laptop (Acer Travelmate 7320) to which we connect a variety of astronomy equipment (a telescope, its mount, some cameras and others) all of which connect through USB. When we plug in these devices, Windows tells us that it detects the hardware and installs the driver. All of these devices then function correctly using the software that came from the vendor (unfortunately, one of the vendors does not support Vista 64, and that is why we're using our XP laptop). However when we reboot the computer we experience a variety of symptoms: Windows reports that it found new hardware for some of the devices and tries to reinstall their drivers, and for some of the other devices needs to be unplugged and plugged in again before they are detected again by the operating system, in which case Windows still tries to reinstall their drivers. It is as if Windows does not remember that it has already installed the drivers. Is this a common problem on Windows XP? If so, what can be done about it? Should we rather be looking at the laptop's firmware and drivers? We've looked into updating the drivers for the chipset, but this did not solve the problem. Thank you in advance.

  Read the article

• What kind of hosting do I need? [closed]

  - by Robert Smith

  I have been trying to answer this question but I haven't found an specific answer to my situation. As I want to pay for what I need, I thought I could get a good answer here. I have custom made forum (rather than a built-in forum like the ones you can find as plugins, e.g. WP-Forum or phpBB type of software) in Django. I don't want to use Apache and modwsgi because it's usually very memory-hungry and I can't afford a big server. I prefer a combination of nginx and gunicorn which I think is very efficient (maybe you can also tell me what you think about that). I'm expecting to receive 10,000 to 20,000 visits each month with 15,000 to 30,000 page impressions. I have reviewed some cloud services like Amazon EC2 or Rackspace and other more traditional services (Linodo). This site won't use videos or big images and I certainly don't need a huge amount of bandwidth (200GB would be definitely too much). I need shell access so shared hosting is out of the question. What do I need to run a website like that without problems? What about RAM? 256MB would be enough (that's the amount of RAM offered by small instances in Amazon and Rackspace)? Do you know of any alternative to those I mentioned? If you need more information to provide a useful answer, please don't hesitate to ask. Thanks a lot.

  Read the article

• windows: force user to use specific network adapter

  - by Chad

  I'm looking for a configuration/hack to force a particular application or all traffic from a particular user to use a specific NIC. I have an legacy client/server app that has a "security feature" that limits connections based on IP address. I'm trying to find a way to migrate this app to a terminal server environment. The simple solution is for the development team to update the code in the application, however in this case that's not an option. I was thinking I might be able to install VMware NIC's installed for each user on the terminal server and do some type of scripting to force that user account to use a specific NIC. Anybody have any ideas on this? EDIT 1: I think I have a hack to work around my specific problem, however I'd love to hear of a more elegant solution. I got lucky in that the software reads the server IP address out of a config file. So I'm going to have to make a config file for each user and make a customer programs files for each user. Then add a VMware NIC for each user and make each server IP address reside on a different subnet. That will force the traffic for a particular user to a particular IP address, however its really messy and all the VM NIC's will slow down the terminal server. I'll setup a proof of concept Monday and let the group know how it affects performance.

  Read the article

• Physical Debian to VMWare: vmware-converter, dd-image or otherwise?

  - by Dabu

  we have two debian Lenny production machines, both running larger commercial websites. Now these machines need to be moved, and in the process, they need to be virtualized to VMWare ESX. If you believe the internet information, there are several ways to accomplish this. The easiest for us would be to use our weekly dd backup where the whole disk, however, I have no experience with this kind of technology and if it is really possible. The second best way would be via an application on the source machine virtualizing it and generating an ESX compatible VM. However, the software is beta and unsupported, and after installation, nothing really works (the /etc/init.d/vmware-converter script doesn't actually do anything, start and stop reply with success messages, yet ps shows that there are no new processes). The worst way with the most work would be to install a new machine and set it up manually, copying files and databases as needed. This part is clear in it's execution, and my question(s) do not touch this. Is my 1st way possible? Has anyone done this yet, or better, has a page with instructions? Or is there a help page that explains how to correctly install, run and use the vmware-converter tool using a Debian installation (it's possible that I dod something wrong during installation already)? Thank you.

  Read the article

• Why is there no /usr/bin/ in windows? Would it be dangerous to the entire Program Files to the path?

  - by dotancohen

  I am a Linux user spending some time in Windows and I'm trying to understand some of the Windows paradigms instead of fighting them. I notice that each program installed in the traditional manner (i.e. via orgasmic installers: Yes, Yes, Yes, Finish) adds the executables to C:/Program Files/foo/bar.exe and then adds a shortcut to the Desktop / Start Menu containing the entire path. However, there is no common directory with links to the software, i.e. C:/bin/bar.exe which would link to C:/Program Files/foo/bar.exe. Therefore, after installing an application the only way to use the application is via the clicky-clicky menus or by navigating to the executable in the filesystem. One cannot simply Win-R to open the run dialogue and then type bar or bar.exe as is possible with notepad or mspaint. I realize that Windows 8 improves on this with the otherwise horrendous Start Screen which does support typing the name of the app, but again this depends on the app having registered itself for such. Would I be doing any harm by adding C:/Program Files recursively to the Windows path? I do realize that there will be name collisions (i.e. uninstall.exe) but could there be other issues?

  Read the article

• grub refuses to install to raid array

  - by ronno

  I have a software raid 0 setup with dual booting Windows 7 and Ubuntu 12.04. The GRUB bootloader that is already on the hard drive seems to work fine. However, since the latest package update for grub, it refuses to install the new version to the hard disk. grub-install throws the following error: /usr/sbin/grub-probe: error: cannot find a GRUB drive for /dev/mapper/< raid name_RAID0p9. Check your device.map. Auto-detection of a filesystem of /dev/mapper/< raid name_RAID0p9 failed. Try with --recheck. If the problem persists please report this together with the output of "/usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs -v /boot/grub" to < [email protected] update-grub pops the same "/usr/sbin/grub-probe: error: cannot find a GRUB drive for /dev/mapper/< raid name_RAID0p9. Check your device.map." every alternate line. I don't understand what exactly is going on. I'm afraid to reinstall the grub package because it might mess up the boot, which currently works fine. Is it safe to just ignore this?

  Read the article

• Strange File-Server I/O Spikes - What Is Causing This?

  - by CruftRemover

  I am currently having a problem with a small Linux server that is providing file-sharing services to four Windows 7 32-bit clients. The server is an AMD PhenomX3 with two Western Digital 10EADS (1TB) drives, attached to a Gigabyte GA-MA770T-UD3 mainboard and running Ubuntu Server 10.04.1 LTS. The client machines are taking an extremely long time to access/transfer data on the file server. Applications often become non-responsive while trying to open files located remotely, or one program attempting to open a file but having to wait will prevent other software from accessing network resources at all. Other examples include one image taking 20 seconds or more to open, and in one instance a user waited 110 seconds for Microsoft Word 2007 to save a document. I had initially thought the problem was network-related, but this appears not to be the case. All cables and switches have been tested (one cable was replaced) for verification. This was additionally confirmed when closing down all client machines and rebooting the server resulted in the hard-drive light staying on solid during the startup process. For the first 15 minutes during boot, logon and after logging on (with no client machines attached), the system displayed a load average of 4 or higher. Symptoms included waiting several minutes for the logon prompt to appear, and then several minutes for the password prompt to appear after typing in a user name. After logon, it also took upwards of 45 seconds for the 'smartctl' man page to appear after the command 'man smartctl' was issued. After 15 minutes of this behaviour, the load average dropped to around 0.02 and the machine behaved normally. I have also considered that the problem is hard-drive-related, however diagnostic programs reveal no drive problems. Western Digital DLG, Spinrite and SMARTUDM show no abnormal characteristics - the drives are in perfect health as far as the hardware is concerned. I have thus far been completely unable to track down the cause of this problem, so any help is greatly appreciated. Requested Information: Output of 'free' hxxp://pastebin.com/mfsJS8HS (stupid spam filter) The command 'hdparm -d /dev/sda1' reports: HDIO_GET_DMA failed: Inappropriate ioctl for device (the BIOS is set to AHCI - I probably should have mentioned that).

  Read the article

• 'Future-proof' Live Audio Capture & Broadcast [migrated]

  - by maxpowers

  I'm looking to implement some live audio broadcasting functionality within a Ruby on Rails site for a client and was hoping I could get some input from people who have tackled this type of thing before. Essentially what I need to do is capture and record a user's audio (via microhpone, line in, etc), then stream that to 1,000+ listeners with very little latency, like sub 2 second if possible. So it looks like we've got 3 parts: Web-based audio capture (likely with Flash or JS) Server to accept audio feed and stream to listeners (likely Icecast or Wowza) Actual audio player (maybe HTML5 w/ Flash as a fallback? Maybe this jPlayer fork) Does RTMP makes sense here? Or maybe HTTP? What's the most 'future-proof' way to make this happen? Building with mobile in mind, but still want to be able stream to anyone. I've found lots of potentially helpful threads and software but I'm struggling to get an idea of how it all fits together. I'm a front end guy and way out of my comfort zone so if anyone has insights to offer, I'd love to hear them.

  Read the article

• Shoretel Upgrade Path

  - by Brian

  I currently have a Shoretel Server running Server 2003 x32 as a virtual machine paired with a ShoreGear 90 switch and another unused switch of the same model being reserved for manual failover. I am getting the software mailed to me from my partner, but with limited support since the server is in a relatively remote area. I am tempted to upgrade the OS at the same time as performing the upgrade, but want to know if there are any horror stories or advice I should know about before diving in. I'm upgrading from Shoretel 9.2 Build. I will be upgrading first to version 10.1 then finally to 11.1. The system has been bullet proof since it was installed and we are upgrading mainly to get a client that is a little more modern. My question boils down to: Should I even bother with an OS upgrade or even possibly a fresh install of Windows with an install of Shoretel 11.1 and just transfer the configuration? Should I just stay with Server 2003 since it is supported in my target version of Shoretel and the upgrade will be more than enough to keep me busy as a novice?

  Read the article

• Why is my new PC so slow at startup?

  - by rumtscho

  Bought a new PC this weekend, and it works really good. Only I have one big problem: startup time. Its BIOS needs 62 sec to load, then from Grub start to pw entering screen it's another 26 sec. I think this is a lot, because my old PC needs 34 sec for BIOS and another 8 sec to pw screen. After I enter the pw, the desktop is usable with practically no delay on both. The new PC is a core i7-930, running a Lucid Lynx 64 bit from a Intel Postville SSD (no internal HDs). The old PC is a Pentium 4 celeron (forgot the clock speed) running a Lucid Lynx 32 bit from an ATA 100 hard drive. Neither PC is overclocked. The new one has boot sequence 1.DVD ROM, 2.SSD (connected over SATA in AHCI mode), 3. removable drive. The old one boots from 1. DVD ROM, 2. HDD, 3. Floppy. Neither has a second OS installed. The new one has less software installed than the old one (I think), but the boot time difference was noticeable even before I made any installs. As far as I know, just the SSD should be enough to make a noticeable difference in boot time. I thought that having a good mainboard on the new PC as opposed to the basic office model on the old one would also mean a faster loading BIOS. If these assumptions are right, I guess I must have misconfigured something in the BIOS of the new PC. How should I configure it for a fast boot? It has an ASUS P6X58D board with an AMI BIOS, if you need the BIOS revision number I could post that too.

  Read the article

• How can I take browser screenshots at a higher resolution than my browser supports?

  - by user53575

  I need to take a screenshot of a website as it would appear on a very high resolution monitor... say 16000x12800 pixels. My laptop's screen has a native resolution of 1280x800. Basically, I need to simulate having a monitor resolution much higher than my monitor and video card actually supports. I want the screenshot of the site to look pretty much how it does when you hit CTRL MINUS (zoom out) in Firefox repeatedly, but without any loss of pixels due to scaling. How can I do this? Is there some way to use virtual machine software to simulate a super-high-res display? If not, is there some way to open a browser window bigger than the screen, and then capture its contents as a PNG somehow? Anything else that might work? Here was an answer: http://superuser.com/questions/120266/how-can-i-take-browser-screenshots-at-a-higher-resolution-than-my-browser-support But it doesn't work. Firefox remains in the resolution of the physical screen. The window blinks and shrinks back to normal resolution. Please Help!!

  Read the article

• Handling emails on a web server - Making sure the FQDN is set correctly based on the website sending the email

  - by webnoob

  I have a Windows 2008 Web Edition server hosting multiple websites using IIS 7.5. At the moment, all the emails are sent via the IIS6 SMTP service. The FQDN of the SMTP service is set to the computer name at the moment which isn't correct as it doesn't resolve to a valid DNS entry and is not RFC compliant. Some questions: Is there any way I can change the FQDN of the SMTP service based on the site sending the email? Would it be Ok to just setup mailserver.mydomain.com and use that as the FQDN for all the sites on multiple domains. Should I be using some other mail server software to handle this better? The reason I am asking is lots of emails are hitting spam folders because the settings are incorrect. I have access to the code that is running the websites so if something needs to be done there then that shouldn't be a problem. The sites are written using ASP.NET 2.0. EDIT: I have just found an option to create an SMTP virtual service. Would this be the way forward? Create a virtual server for each site? Thanks.

  Read the article

• RAID degraded on Ubuntu server

  - by reano

  We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

  Read the article

• Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac.

  - by Rob

  Can anyone advise me of a really good, readable, Windows 7 TCP/IP network share guide, book, or reference. I want this because I cannot mount my Lacie 2big ethernet network drive in Windows 7 (32 bit home), but I can mount it in Windows XP Home 32bit, Ubuntu Linux 10.04 and Apple MacOS X. This drive is being mounted via the accompanying Lacie Ethernet Agent in XP (which I believe uses "Bonjour" protocol), on Mac and Linux it works without further need for software. Another Super User user has the same problem, but no answer: Trouble accessing network drives in Windows 7 I hope my take on the question shows a better willingness to investigate and do some digging - and therefore invite some suggestions to help with this. The drive is detected by Windows 7 (i.e. speech bubble "network drive found") but on trying to open an Explorer window, this remains blank with the Windows busy pointer. I'd prefer not to reinstall Windows 7 to see if that cures the problem, I'd rather understand what is happening/not happening, perhaps even compare differences with Windows XP. Suggestions, please for such guides or even the original problem itself. Update Edit Rewrote question more comprehensively here: Mhttp://superuser.com/questions/304209/looking-for-definitive-answer-to-accessing-a-network-share-via-windows-7-home-and

  Read the article

• Setting up Web server so it is easy to migrate

  - by Nyxynyx

  Hi I am about to move my site from a VPS to another host's dedicated server. One of my concern is about scaling the site in the future that involves a change of server. Now that I am starting the dedicated server from scratch with only the OS, this means that I need to install the web server stack, including Apache and its mods, PHP, MySQL, PostgreSQL, Tomcat, Solr and a few other softwares like ImageMagick and git. Question: Is there a way for me to setup this new dedicated server such that I can easily migrate the entire site, both the technology stack and the code to the a newer server (upgrade from this new dedicated server) easily without reinstalling and reconfiguring everything? The code for the website is being handled by git and github so thats not a problem. I'm more conerned about the rest of the software required. Side question: The current VPS uses CentOs with cpanel and it seems that many packages are outdated on yum and cpanel interfers with the installation of many packages. Which OS should I go with for the new server? Ubuntu?

  Read the article

• Standing and sitting while using a computer at work

  - by Adam Batkin

  I would like to be able to comfortably switch between sitting and standing while at work (I'm a software developer, so I spend most of my day in front of a computer). For the past couple of months I have been using a large elevated stand that sits on my desk (designed expressly for this purpose) containing my keyboard and mouse, and my monitors have been raised as high as possible and aimed upwards. So I can stand all day and I'm pretty comfortable (my right wrist may be at too much of an angle when it's on my mouse, but that's a separate issue). The only problem is that sometimes I want to be able to sit. I can easily place my keyboard and mouse back down under the elevated stand, but I have to look up pretty steeply and that is uncomfortable and makes it difficult to see the screens since they are tilted upwards. My monitor mounts are difficult to adjust quickly/easily, so I can't just re-aim them. I would of course love one of those hydraulic standing/sitting desks (cost isn't the problem). But I'm in a row of "trader-style" desks where it's basically a very long surface with people sitting at 6-foot intervals. What type of equipment do you recommend? I suppose the best thing would be some sort of monitor stand (it must be able to hold 2-3 LCDs) that can easily be lowered and raised. But any other suggestions are also welcome.

  Read the article

• How can I create a separate toolbar from the Task Bar?

  - by Iszi

  In Windows XP, you could separate toolbars from the Task Bar by dragging them to the desktop. They could then be left lying about anywhere on your screen or, my preferred option, docked to any side of the screen. I found this particularly useful to keep a handy list of common phone numbers quickly accessible. I'd create a new toolbar pointing to a custom folder, and put a bunch of dead shortcuts in the folder that had names and numbers as their file names. I'd then dock the toolbar to the left side, set it to auto-hide and always on top (options which could be set separate from the Task Bar as well) and it would be readily available no matter what else I was doing on my system. However, on my Windows 7 system, I seem unable to perform the crucial step of pulling the new toolbar off of the Task Bar. This is of course with the Task Bar "unlocked" so that I can move all my toolbars around. Is there something I'm missing here, or is this a feature that's been disabled in Windows 7? Is there any way to re-enable it, or otherwise achieve similar functionality? I'd rather be able to do this without additional software, if possible.

  Read the article

• What can inexperienced admin expect after server setup completed seemingly fine? [closed]

  - by Miloshio

  Inexperienced person seems to have done everything fine so far. This is his very first time that he is the only one in charge for LAMP server. He has installed OS, network, Apache, PHP, MySQL, Proftpd, MTA & MDA software, configured VirtualHosts properly (facts because he calls himself admin), done user management and various configuration settings with respect to security recommendations and... everything is fine for now... For now. If you were directing horror movie for server admin above mentioned what would you make up for boogieman that showed up and started to pursue him? Omitting hardware disaster cases for which one cannot do anything 'from remote', what is the most common causes of server or part-of-server or server-related significant failure when managed by inexperienced admin? I have in mind something that is newbie admins very often missing which is leading to later intervention of someone with experience? May that be some uncontrolled CPU-eating leftover process, memory-related glitch, widely-used feature that messes up something unexpected on anything like that? Newbie admin for now only monitors disk-space and RAM usage, and number of running processes. He would appreciate any tips regarding what's probably going to happen to his server over time.

  Read the article

• SSH from ubuntu server to Windows 2008 repeatedly asks for password

  - by jrizos

  I am trying to setup GIT using SSH mode. The central GIT repository is on a NAS device running Windows 2008 server and the user GIT repository is on ubuntu 12.04. When I try to SSH to the windows machine however I am not able to successfully get in. SSH keays are not setup but I think the problem is even before that since I cant get in just by providing the correct password. The output from the SSH command is below. Any help would be appreciated. dba@clpserv01:~$ ssh -v -l administrator clpnas OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to clpnas [***.***.***.***] port 22. debug1: Connection established. debug1: identity file /home/dba/.ssh/id_rsa type -1 debug1: identity file /home/dba/.ssh/id_rsa-cert type -1 debug1: identity file /home/dba/.ssh/id_dsa type -1 debug1: identity file /home/dba/.ssh/id_dsa-cert type -1 debug1: identity file /home/dba/.ssh/id_ecdsa type -1 debug1: identity file /home/dba/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5p1 Debian-6+squeeze2 debug1: match: OpenSSH_5.5p1 Debian-6+squeeze2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA bd:37:d1:98:51:2a:d6:b5:f5:c7:98:d8:74:2c:4e:cd debug1: Host 'clpnas' is known and matches the RSA host key. debug1: Found key in /home/dba/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /home/dba/.ssh/id_rsa debug1: Trying private key: /home/dba/.ssh/id_dsa debug1: Trying private key: /home/dba/.ssh/id_ecdsa debug1: Next authentication method: keyboard-interactive Password: debug1: Authentications that can continue: publickey,password,keyboard-interactive Password:

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• How to make Firefox file associations consistent with Ubuntu file associations?

  - by wbharding

  This seems to be a pretty commonly Google question, but one for which there are no answers. http://www.linuxquestions.org/questions/linux-software-2/firefox-download-mime-types-378902 http://www.birkit.com/content/kubuntu-linux/internet/firefox/fix-file-associations-in-firefox.html Being three links amongst the many. The gist of what I want to accomplish is to have Firefox understand the file associations I download without me having to manually map all of them myself. Gnome knows the file extensions, so I would have expected that Firefox could just use the already-known file mappings there to open the right stuff (as I presume Chrome does). But it doesn't. At least not for me, using Firefox 4, and not by default. When I click on a downloaded file right now, Firefox always has to ask me what application should be used to open the file. A handful of Google results tell me that I can reassociate my file extensions by deleting ~/.mozilla/firefox/[profile name]/mimeTypes.rdf, but while deleting that file does in fact result in a new mimeTypes file being generated, the new mimeTypes is just as barren as the old one had been. Based on the amount of unanswered Qs on the Googlesphere, I know this is a very common problem for Ubuntu users, but it seems to be one for which nobody has chimed in with a good solution. Maybe Superuser can finally be the panacea for us all?

  Read the article

< Previous Page | 704 705 706 707 708 709 710 711 712 713 714 715  | Next Page >